Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (158 commits)
  commit 4f705ae3e94ffaafe8d35f71ff4d5c499bb06814
  Author: Bjorn Helgaas <bjorn.helgaas@hp.com>
  Date:   Mon Apr 3 17:09:22 2006 -0700
  
      [PATCH] DMI: move dmi_scan.c from arch/i386 to drivers/firmware/
      
      dmi_scan.c is arch-independent and is used by i386, x86_64, and ia64.
      Currently all three arches compile it from arch/i386, which means that ia64
      and x86_64 depend on things in arch/i386 that they wouldn't otherwise care
      about.
      
      This is simply "mv arch/i386/kernel/dmi_scan.c drivers/firmware/" (removing
      trailing whitespace) and the associated Makefile changes.  All three
      architectures already set CONFIG_DMI in their top-level Kconfig files.
      
      Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
      Cc: Andi Kleen <ak@muc.de>
      Cc: "Luck, Tony" <tony.luck@intel.com>
      Cc: Andrey Panin <pazke@orbita1.ru>
      Signed-off-by: Andrew Morton <akpm@osdl.org>
  ...

10 files changed, 396 insertions, 17 deletions

diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index 48718b7f4fa0..76656acd00d4 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -188,6 +188,11 @@ static ssize_t driver_bind(struct device_driver *drv,
 		up(&dev->sem);
 		if (dev->parent)
 			up(&dev->parent->sem);
+
+		if (err > 0) 		/* success */
+			err = count;
+		else if (err == 0)	/* driver didn't accept device */
+			err = -ENODEV;
 	}
 	put_device(dev);
 	put_bus(bus);
diff --git a/drivers/base/class.c b/drivers/base/class.c
index df7fdabd0730..0e71dff327cd 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -562,14 +562,13 @@ int class_device_add(struct class_device *class_dev)
 	kobject_uevent(&class_dev->kobj, KOBJ_ADD);
 
 	/* notify any interfaces this device is now here */
-	if (parent_class) {
-		down(&parent_class->sem);
-		list_add_tail(&class_dev->node, &parent_class->children);
-		list_for_each_entry(class_intf, &parent_class->interfaces, node)
-			if (class_intf->add)
-				class_intf->add(class_dev, class_intf);
-		up(&parent_class->sem);
+	down(&parent_class->sem);
+	list_add_tail(&class_dev->node, &parent_class->children);
+	list_for_each_entry(class_intf, &parent_class->interfaces, node) {
+		if (class_intf->add)
+			class_intf->add(class_dev, class_intf);
 	}
+	up(&parent_class->sem);
 
  register_done:
 	if (error) {
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index 730a9ce0a14a..889c71111239 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -209,7 +209,7 @@ static void __device_release_driver(struct device * dev)
 		sysfs_remove_link(&dev->kobj, "driver");
 		klist_remove(&dev->knode_driver);
 
-		if (dev->bus->remove)
+		if (dev->bus && dev->bus->remove)
 			dev->bus->remove(dev);
 		else if (drv->remove)
 			drv->remove(dev);
diff --git a/drivers/base/power/suspend.c b/drivers/base/power/suspend.c
index bdb60663f2ef..662209d3f42d 100644
--- a/drivers/base/power/suspend.c
+++ b/drivers/base/power/suspend.c
@@ -10,6 +10,8 @@
 
 #include <linux/vt_kern.h>
 #include <linux/device.h>
+#include <linux/kallsyms.h>
+#include <linux/pm.h>
 #include "../base.h"
 #include "power.h"
 
@@ -58,6 +60,7 @@ int suspend_device(struct device * dev, pm_message_t state)
 	if (dev->bus && dev->bus->suspend && !dev->power.power_state.event) {
 		dev_dbg(dev, "suspending\n");
 		error = dev->bus->suspend(dev, state);
+		suspend_report_result(dev->bus->suspend, error);
 	}
 	up(&dev->sem);
 	return error;
@@ -169,3 +172,12 @@ int device_power_down(pm_message_t state)
 
 EXPORT_SYMBOL_GPL(device_power_down);
 
+void __suspend_report_result(const char *function, void *fn, int ret)
+{
+	if (ret) {
+		printk(KERN_ERR "%s(): ", function);
+		print_fn_descriptor_symbol("%s() returns ", (unsigned long)fn);
+		printk("%d\n", ret);
+	}
+}
+EXPORT_SYMBOL_GPL(__suspend_report_result);
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 85429979d0db..98e395f4bb29 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -1,7 +1,8 @@
 #
 # Makefile for the linux kernel.
 #
-obj-$(CONFIG_EDD)             	+= edd.o
+obj-$(CONFIG_DMI)		+= dmi_scan.o
+obj-$(CONFIG_EDD)		+= edd.o
 obj-$(CONFIG_EFI_VARS)		+= efivars.o
 obj-$(CONFIG_EFI_PCDP)		+= pcdp.o
 obj-$(CONFIG_DELL_RBU)          += dell_rbu.o
diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
new file mode 100644
index 000000000000..948bd7e1445a
--- /dev/null
+++ b/drivers/firmware/dmi_scan.c
@@ -0,0 +1,358 @@
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/dmi.h>
+#include <linux/efi.h>
+#include <linux/bootmem.h>
+#include <linux/slab.h>
+#include <asm/dmi.h>
+
+static char * __init dmi_string(struct dmi_header *dm, u8 s)
+{
+	u8 *bp = ((u8 *) dm) + dm->length;
+	char *str = "";
+
+	if (s) {
+		s--;
+		while (s > 0 && *bp) {
+			bp += strlen(bp) + 1;
+			s--;
+		}
+
+		if (*bp != 0) {
+			str = dmi_alloc(strlen(bp) + 1);
+			if (str != NULL)
+				strcpy(str, bp);
+			else
+				printk(KERN_ERR "dmi_string: out of memory.\n");
+		}
+	}
+
+	return str;
+}
+
+/*
+ *	We have to be cautious here. We have seen BIOSes with DMI pointers
+ *	pointing to completely the wrong place for example
+ */
+static int __init dmi_table(u32 base, int len, int num,
+			    void (*decode)(struct dmi_header *))
+{
+	u8 *buf, *data;
+	int i = 0;
+
+	buf = dmi_ioremap(base, len);
+	if (buf == NULL)
+		return -1;
+
+	data = buf;
+
+	/*
+	 *	Stop when we see all the items the table claimed to have
+	 *	OR we run off the end of the table (also happens)
+	 */
+	while ((i < num) && (data - buf + sizeof(struct dmi_header)) <= len) {
+		struct dmi_header *dm = (struct dmi_header *)data;
+		/*
+		 *  We want to know the total length (formated area and strings)
+		 *  before decoding to make sure we won't run off the table in
+		 *  dmi_decode or dmi_string
+		 */
+		data += dm->length;
+		while ((data - buf < len - 1) && (data[0] || data[1]))
+			data++;
+		if (data - buf < len - 1)
+			decode(dm);
+		data += 2;
+		i++;
+	}
+	dmi_iounmap(buf, len);
+	return 0;
+}
+
+static int __init dmi_checksum(u8 *buf)
+{
+	u8 sum = 0;
+	int a;
+
+	for (a = 0; a < 15; a++)
+		sum += buf[a];
+
+	return sum == 0;
+}
+
+static char *dmi_ident[DMI_STRING_MAX];
+static LIST_HEAD(dmi_devices);
+
+/*
+ *	Save a DMI string
+ */
+static void __init dmi_save_ident(struct dmi_header *dm, int slot, int string)
+{
+	char *p, *d = (char*) dm;
+
+	if (dmi_ident[slot])
+		return;
+
+	p = dmi_string(dm, d[string]);
+	if (p == NULL)
+		return;
+
+	dmi_ident[slot] = p;
+}
+
+static void __init dmi_save_devices(struct dmi_header *dm)
+{
+	int i, count = (dm->length - sizeof(struct dmi_header)) / 2;
+	struct dmi_device *dev;
+
+	for (i = 0; i < count; i++) {
+		char *d = (char *)(dm + 1) + (i * 2);
+
+		/* Skip disabled device */
+		if ((*d & 0x80) == 0)
+			continue;
+
+		dev = dmi_alloc(sizeof(*dev));
+		if (!dev) {
+			printk(KERN_ERR "dmi_save_devices: out of memory.\n");
+			break;
+		}
+
+		dev->type = *d++ & 0x7f;
+		dev->name = dmi_string(dm, *d);
+		dev->device_data = NULL;
+
+		list_add(&dev->list, &dmi_devices);
+	}
+}
+
+static void __init dmi_save_ipmi_device(struct dmi_header *dm)
+{
+	struct dmi_device *dev;
+	void * data;
+
+	data = dmi_alloc(dm->length);
+	if (data == NULL) {
+		printk(KERN_ERR "dmi_save_ipmi_device: out of memory.\n");
+		return;
+	}
+
+	memcpy(data, dm, dm->length);
+
+	dev = dmi_alloc(sizeof(*dev));
+	if (!dev) {
+		printk(KERN_ERR "dmi_save_ipmi_device: out of memory.\n");
+		return;
+	}
+
+	dev->type = DMI_DEV_TYPE_IPMI;
+	dev->name = "IPMI controller";
+	dev->device_data = data;
+
+	list_add(&dev->list, &dmi_devices);
+}
+
+/*
+ *	Process a DMI table entry. Right now all we care about are the BIOS
+ *	and machine entries. For 2.5 we should pull the smbus controller info
+ *	out of here.
+ */
+static void __init dmi_decode(struct dmi_header *dm)
+{
+	switch(dm->type) {
+	case 0:		/* BIOS Information */
+		dmi_save_ident(dm, DMI_BIOS_VENDOR, 4);
+		dmi_save_ident(dm, DMI_BIOS_VERSION, 5);
+		dmi_save_ident(dm, DMI_BIOS_DATE, 8);
+		break;
+	case 1:		/* System Information */
+		dmi_save_ident(dm, DMI_SYS_VENDOR, 4);
+		dmi_save_ident(dm, DMI_PRODUCT_NAME, 5);
+		dmi_save_ident(dm, DMI_PRODUCT_VERSION, 6);
+		dmi_save_ident(dm, DMI_PRODUCT_SERIAL, 7);
+		break;
+	case 2:		/* Base Board Information */
+		dmi_save_ident(dm, DMI_BOARD_VENDOR, 4);
+		dmi_save_ident(dm, DMI_BOARD_NAME, 5);
+		dmi_save_ident(dm, DMI_BOARD_VERSION, 6);
+		break;
+	case 10:	/* Onboard Devices Information */
+		dmi_save_devices(dm);
+		break;
+	case 38:	/* IPMI Device Information */
+		dmi_save_ipmi_device(dm);
+	}
+}
+
+static int __init dmi_present(char __iomem *p)
+{
+	u8 buf[15];
+	memcpy_fromio(buf, p, 15);
+	if ((memcmp(buf, "_DMI_", 5) == 0) && dmi_checksum(buf)) {
+		u16 num = (buf[13] << 8) | buf[12];
+		u16 len = (buf[7] << 8) | buf[6];
+		u32 base = (buf[11] << 24) | (buf[10] << 16) |
+			(buf[9] << 8) | buf[8];
+
+		/*
+		 * DMI version 0.0 means that the real version is taken from
+		 * the SMBIOS version, which we don't know at this point.
+		 */
+		if (buf[14] != 0)
+			printk(KERN_INFO "DMI %d.%d present.\n",
+			       buf[14] >> 4, buf[14] & 0xF);
+		else
+			printk(KERN_INFO "DMI present.\n");
+		if (dmi_table(base,len, num, dmi_decode) == 0)
+			return 0;
+	}
+	return 1;
+}
+
+void __init dmi_scan_machine(void)
+{
+	char __iomem *p, *q;
+	int rc;
+
+	if (efi_enabled) {
+		if (efi.smbios == EFI_INVALID_TABLE_ADDR)
+			goto out;
+
+               /* This is called as a core_initcall() because it isn't
+                * needed during early boot.  This also means we can
+                * iounmap the space when we're done with it.
+		*/
+		p = dmi_ioremap(efi.smbios, 32);
+		if (p == NULL)
+			goto out;
+
+		rc = dmi_present(p + 0x10); /* offset of _DMI_ string */
+		dmi_iounmap(p, 32);
+		if (!rc)
+			return;
+	}
+	else {
+		/*
+		 * no iounmap() for that ioremap(); it would be a no-op, but
+		 * it's so early in setup that sucker gets confused into doing
+		 * what it shouldn't if we actually call it.
+		 */
+		p = dmi_ioremap(0xF0000, 0x10000);
+		if (p == NULL)
+			goto out;
+
+		for (q = p; q < p + 0x10000; q += 16) {
+			rc = dmi_present(q);
+			if (!rc)
+				return;
+		}
+	}
+ out:	printk(KERN_INFO "DMI not present or invalid.\n");
+}
+
+/**
+ *	dmi_check_system - check system DMI data
+ *	@list: array of dmi_system_id structures to match against
+ *
+ *	Walk the blacklist table running matching functions until someone
+ *	returns non zero or we hit the end. Callback function is called for
+ *	each successfull match. Returns the number of matches.
+ */
+int dmi_check_system(struct dmi_system_id *list)
+{
+	int i, count = 0;
+	struct dmi_system_id *d = list;
+
+	while (d->ident) {
+		for (i = 0; i < ARRAY_SIZE(d->matches); i++) {
+			int s = d->matches[i].slot;
+			if (s == DMI_NONE)
+				continue;
+			if (dmi_ident[s] && strstr(dmi_ident[s], d->matches[i].substr))
+				continue;
+			/* No match */
+			goto fail;
+		}
+		count++;
+		if (d->callback && d->callback(d))
+			break;
+fail:		d++;
+	}
+
+	return count;
+}
+EXPORT_SYMBOL(dmi_check_system);
+
+/**
+ *	dmi_get_system_info - return DMI data value
+ *	@field: data index (see enum dmi_filed)
+ *
+ *	Returns one DMI data value, can be used to perform
+ *	complex DMI data checks.
+ */
+char *dmi_get_system_info(int field)
+{
+	return dmi_ident[field];
+}
+EXPORT_SYMBOL(dmi_get_system_info);
+
+/**
+ *	dmi_find_device - find onboard device by type/name
+ *	@type: device type or %DMI_DEV_TYPE_ANY to match all device types
+ *	@desc: device name string or %NULL to match all
+ *	@from: previous device found in search, or %NULL for new search.
+ *
+ *	Iterates through the list of known onboard devices. If a device is
+ *	found with a matching @vendor and @device, a pointer to its device
+ *	structure is returned.  Otherwise, %NULL is returned.
+ *	A new search is initiated by passing %NULL to the @from argument.
+ *	If @from is not %NULL, searches continue from next device.
+ */
+struct dmi_device * dmi_find_device(int type, const char *name,
+				    struct dmi_device *from)
+{
+	struct list_head *d, *head = from ? &from->list : &dmi_devices;
+
+	for(d = head->next; d != &dmi_devices; d = d->next) {
+		struct dmi_device *dev = list_entry(d, struct dmi_device, list);
+
+		if (((type == DMI_DEV_TYPE_ANY) || (dev->type == type)) &&
+		    ((name == NULL) || (strcmp(dev->name, name) == 0)))
+			return dev;
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL(dmi_find_device);
+
+/**
+ *	dmi_get_year - Return year of a DMI date
+ *	@field:	data index (like dmi_get_system_info)
+ *
+ *	Returns -1 when the field doesn't exist. 0 when it is broken.
+ */
+int dmi_get_year(int field)
+{
+	int year;
+	char *s = dmi_get_system_info(field);
+
+	if (!s)
+		return -1;
+	if (*s == '\0')
+		return 0;
+	s = strrchr(s, '/');
+	if (!s)
+		return 0;
+
+	s += 1;
+	year = simple_strtoul(s, NULL, 0);
+	if (year && year < 100) {	/* 2-digit year */
+		year += 1900;
+		if (year < 1996)	/* no dates < spec 1.0 */
+			year += 100;
+	}
+
+	return year;
+}
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 1ed5152db450..434ca39d19c1 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -163,6 +163,7 @@ void md_new_event(mddev_t *mddev)
 {
 	atomic_inc(&md_event_count);
 	wake_up(&md_event_waiters);
+	sysfs_notify(&mddev->kobj, NULL, "sync_action");
 }
 EXPORT_SYMBOL_GPL(md_new_event);
 
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index f22f69ac6445..1456759936c5 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -271,10 +271,12 @@ static int pci_device_suspend(struct device * dev, pm_message_t state)
 	struct pci_driver * drv = pci_dev->driver;
 	int i = 0;
 
-	if (drv && drv->suspend)
+	if (drv && drv->suspend) {
 		i = drv->suspend(pci_dev, state);
-	else
+		suspend_report_result(drv->suspend, i);
+	} else {
 		pci_save_state(pci_dev);
+	}
 	return i;
 }
 
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index bea1ad1ad5ba..042fa5265cf6 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -307,9 +307,11 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 	 * Can enter D0 from any state, but if we can only go deeper 
 	 * to sleep if we're already in a low power state
 	 */
-	if (state != PCI_D0 && dev->current_state > state)
+	if (state != PCI_D0 && dev->current_state > state) {
+		printk(KERN_ERR "%s(): %s: state=%d, current state=%d\n",
+			__FUNCTION__, pci_name(dev), state, dev->current_state);
 		return -EINVAL;
-	else if (dev->current_state == state) 
+	} else if (dev->current_state == state)
 		return 0;        /* we're already there */
 
 	/* find PCI PM capability in list */
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 0d2193b69235..66b78404ab34 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -213,11 +213,9 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message)
 
 	if (hcd->driver->suspend) {
 		retval = hcd->driver->suspend(hcd, message);
-		if (retval) {
-			dev_dbg (&dev->dev, "PCI pre-suspend fail, %d\n",
-				retval);
+		suspend_report_result(hcd->driver->suspend, retval);
+		if (retval)
 			goto done;
-		}
 	}
 	synchronize_irq(dev->irq);
 
@@ -263,6 +261,7 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message)
 		 * some device state (e.g. as part of clock reinit).
 		 */
 		retval = pci_set_power_state (dev, PCI_D3hot);
+		suspend_report_result(pci_set_power_state, retval);
 		if (retval == 0) {
 			int wake = device_can_wakeup(&hcd->self.root_hub->dev);