diff options
| author | Aaro Koskinen <aaro.koskinen@iki.fi> | 2013-03-05 13:04:23 +0200 |
|---|---|---|
| committer | Felipe Balbi <balbi@ti.com> | 2013-03-05 13:26:59 +0200 |
| commit | f8c4b0e73b636fe06e8283f29905c2e60ed66fa1 (patch) | |
| tree | 6aabcbd375af4862a443f67123773f80835b4e65 /drivers/usb | |
| parent | e574d5708156585ee506b7f914ed4a55a319d294 (diff) | |
| download | blackbird-op-linux-f8c4b0e73b636fe06e8283f29905c2e60ed66fa1.tar.gz blackbird-op-linux-f8c4b0e73b636fe06e8283f29905c2e60ed66fa1.zip | |
usb: musb: omap2430: fix omap_musb_mailbox glue check again
Commit 80ab72e1 (usb: musb: omap2430: fix the readiness check
in omap_musb_mailbox) made the check incorrect, as we will lose the
glue/link status during the normal built-in probe order (twl4030_usb is
probed after musb omap2430, but before musb core is ready).
As a result, if you boot with USB cable on and load g_ether, the
connection does not work as the code thinks the cable is off and the
phy gets powered down immediately. This is a major regression in 3.9-rc1.
So the proper check should be: exit if _glue is NULL, but if it's
initialized we memorize the status, and then check if the musb core
is ready.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Diffstat (limited to 'drivers/usb')
| -rw-r--r-- | drivers/usb/musb/omap2430.c | 10 |
1 files changed, 7 insertions, 3 deletions
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 1762354fe793..2a39c110d3d5 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -237,9 +237,13 @@ void omap_musb_mailbox(enum omap_musb_vbus_id_status status) { struct omap2430_glue *glue = _glue; - if (glue && glue_to_musb(glue)) { - glue->status = status; - } else { + if (!glue) { + pr_err("%s: musb core is not yet initialized\n", __func__); + return; + } + glue->status = status; + + if (!glue_to_musb(glue)) { pr_err("%s: musb core is not yet ready\n", __func__); return; } |
