Merge branch 'x86/urgent' into x86/asm, before applying dependent patches

Signed-off-by: Ingo Molnar <mingo@kernel.org>

35 files changed, 380 insertions, 257 deletions

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 519a77ba214c..b30e7423549b 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1944,6 +1944,7 @@ static void __exit acm_exit(void)
 	usb_deregister(&acm_driver);
 	tty_unregister_driver(acm_tty_driver);
 	put_tty_driver(acm_tty_driver);
+	idr_destroy(&acm_minors);
 }
 
 module_init(acm_init);
diff --git a/drivers/usb/common/ulpi.c b/drivers/usb/common/ulpi.c
index 0e6f968e93fe..01c0c0477a9e 100644
--- a/drivers/usb/common/ulpi.c
+++ b/drivers/usb/common/ulpi.c
@@ -242,7 +242,7 @@ static int __init ulpi_init(void)
 {
 	return bus_register(&ulpi_bus);
 }
-module_init(ulpi_init);
+subsys_initcall(ulpi_init);
 
 static void __exit ulpi_exit(void)
 {
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index be5b2074f906..cbcd0920fb51 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1022,9 +1022,12 @@ static int register_root_hub(struct usb_hcd *hcd)
 				dev_name(&usb_dev->dev), retval);
 		return (retval < 0) ? retval : -EMSGSIZE;
 	}
-	if (usb_dev->speed == USB_SPEED_SUPER) {
+
+	if (le16_to_cpu(usb_dev->descriptor.bcdUSB) >= 0x0201) {
 		retval = usb_get_bos_descriptor(usb_dev);
-		if (retval < 0) {
+		if (!retval) {
+			usb_dev->lpm_capable = usb_device_supports_lpm(usb_dev);
+		} else if (usb_dev->speed == USB_SPEED_SUPER) {
 			mutex_unlock(&usb_bus_list_lock);
 			dev_dbg(parent_dev, "can't read %s bos descriptor %d\n",
 					dev_name(&usb_dev->dev), retval);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 43cb2f2e3b43..73dfa194160b 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -122,7 +122,7 @@ struct usb_hub *usb_hub_to_struct_hub(struct usb_device *hdev)
 	return usb_get_intfdata(hdev->actconfig->interface[0]);
 }
 
-static int usb_device_supports_lpm(struct usb_device *udev)
+int usb_device_supports_lpm(struct usb_device *udev)
 {
 	/* USB 2.1 (and greater) devices indicate LPM support through
 	 * their USB 2.0 Extended Capabilities BOS descriptor.
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 7eb1e26798e5..457255a3306a 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -65,6 +65,7 @@ extern int  usb_hub_init(void);
 extern void usb_hub_cleanup(void);
 extern int usb_major_init(void);
 extern void usb_major_cleanup(void);
+extern int usb_device_supports_lpm(struct usb_device *udev);
 
 #ifdef	CONFIG_PM
 
diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index e5b546f1152e..c3cc1a78d1e2 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -72,17 +72,7 @@ static int dwc2_backup_host_registers(struct dwc2_hsotg *hsotg)
 	dev_dbg(hsotg->dev, "%s\n", __func__);
 
 	/* Backup Host regs */
-	hr = hsotg->hr_backup;
-	if (!hr) {
-		hr = devm_kzalloc(hsotg->dev, sizeof(*hr), GFP_KERNEL);
-		if (!hr) {
-			dev_err(hsotg->dev, "%s: can't allocate host regs\n",
-					__func__);
-			return -ENOMEM;
-		}
-
-		hsotg->hr_backup = hr;
-	}
+	hr = &hsotg->hr_backup;
 	hr->hcfg = readl(hsotg->regs + HCFG);
 	hr->haintmsk = readl(hsotg->regs + HAINTMSK);
 	for (i = 0; i < hsotg->core_params->host_channels; ++i)
@@ -90,6 +80,7 @@ static int dwc2_backup_host_registers(struct dwc2_hsotg *hsotg)
 
 	hr->hprt0 = readl(hsotg->regs + HPRT0);
 	hr->hfir = readl(hsotg->regs + HFIR);
+	hr->valid = true;
 
 	return 0;
 }
@@ -109,12 +100,13 @@ static int dwc2_restore_host_registers(struct dwc2_hsotg *hsotg)
 	dev_dbg(hsotg->dev, "%s\n", __func__);
 
 	/* Restore host regs */
-	hr = hsotg->hr_backup;
-	if (!hr) {
+	hr = &hsotg->hr_backup;
+	if (!hr->valid) {
 		dev_err(hsotg->dev, "%s: no host registers to restore\n",
 				__func__);
 		return -EINVAL;
 	}
+	hr->valid = false;
 
 	writel(hr->hcfg, hsotg->regs + HCFG);
 	writel(hr->haintmsk, hsotg->regs + HAINTMSK);
@@ -152,17 +144,7 @@ static int dwc2_backup_device_registers(struct dwc2_hsotg *hsotg)
 	dev_dbg(hsotg->dev, "%s\n", __func__);
 
 	/* Backup dev regs */
-	dr = hsotg->dr_backup;
-	if (!dr) {
-		dr = devm_kzalloc(hsotg->dev, sizeof(*dr), GFP_KERNEL);
-		if (!dr) {
-			dev_err(hsotg->dev, "%s: can't allocate device regs\n",
-					__func__);
-			return -ENOMEM;
-		}
-
-		hsotg->dr_backup = dr;
-	}
+	dr = &hsotg->dr_backup;
 
 	dr->dcfg = readl(hsotg->regs + DCFG);
 	dr->dctl = readl(hsotg->regs + DCTL);
@@ -195,7 +177,7 @@ static int dwc2_backup_device_registers(struct dwc2_hsotg *hsotg)
 		dr->doeptsiz[i] = readl(hsotg->regs + DOEPTSIZ(i));
 		dr->doepdma[i] = readl(hsotg->regs + DOEPDMA(i));
 	}
-
+	dr->valid = true;
 	return 0;
 }
 
@@ -215,12 +197,13 @@ static int dwc2_restore_device_registers(struct dwc2_hsotg *hsotg)
 	dev_dbg(hsotg->dev, "%s\n", __func__);
 
 	/* Restore dev regs */
-	dr = hsotg->dr_backup;
-	if (!dr) {
+	dr = &hsotg->dr_backup;
+	if (!dr->valid) {
 		dev_err(hsotg->dev, "%s: no device registers to restore\n",
 				__func__);
 		return -EINVAL;
 	}
+	dr->valid = false;
 
 	writel(dr->dcfg, hsotg->regs + DCFG);
 	writel(dr->dctl, hsotg->regs + DCTL);
@@ -268,17 +251,7 @@ static int dwc2_backup_global_registers(struct dwc2_hsotg *hsotg)
 	int i;
 
 	/* Backup global regs */
-	gr = hsotg->gr_backup;
-	if (!gr) {
-		gr = devm_kzalloc(hsotg->dev, sizeof(*gr), GFP_KERNEL);
-		if (!gr) {
-			dev_err(hsotg->dev, "%s: can't allocate global regs\n",
-					__func__);
-			return -ENOMEM;
-		}
-
-		hsotg->gr_backup = gr;
-	}
+	gr = &hsotg->gr_backup;
 
 	gr->gotgctl = readl(hsotg->regs + GOTGCTL);
 	gr->gintmsk = readl(hsotg->regs + GINTMSK);
@@ -291,6 +264,7 @@ static int dwc2_backup_global_registers(struct dwc2_hsotg *hsotg)
 	for (i = 0; i < MAX_EPS_CHANNELS; i++)
 		gr->dtxfsiz[i] = readl(hsotg->regs + DPTXFSIZN(i));
 
+	gr->valid = true;
 	return 0;
 }
 
@@ -309,12 +283,13 @@ static int dwc2_restore_global_registers(struct dwc2_hsotg *hsotg)
 	dev_dbg(hsotg->dev, "%s\n", __func__);
 
 	/* Restore global regs */
-	gr = hsotg->gr_backup;
-	if (!gr) {
+	gr = &hsotg->gr_backup;
+	if (!gr->valid) {
 		dev_err(hsotg->dev, "%s: no global registers to restore\n",
 				__func__);
 		return -EINVAL;
 	}
+	gr->valid = false;
 
 	writel(0xffffffff, hsotg->regs + GINTSTS);
 	writel(gr->gotgctl, hsotg->regs + GOTGCTL);
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 53b8de03f102..0ed87620941b 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -492,6 +492,7 @@ struct dwc2_gregs_backup {
 	u32 gdfifocfg;
 	u32 dtxfsiz[MAX_EPS_CHANNELS];
 	u32 gpwrdn;
+	bool valid;
 };
 
 /**
@@ -521,6 +522,7 @@ struct dwc2_dregs_backup {
 	u32 doepctl[MAX_EPS_CHANNELS];
 	u32 doeptsiz[MAX_EPS_CHANNELS];
 	u32 doepdma[MAX_EPS_CHANNELS];
+	bool valid;
 };
 
 /**
@@ -538,6 +540,7 @@ struct dwc2_hregs_backup {
 	u32 hcintmsk[MAX_EPS_CHANNELS];
 	u32 hprt0;
 	u32 hfir;
+	bool valid;
 };
 
 /**
@@ -705,9 +708,9 @@ struct dwc2_hsotg {
 	struct work_struct wf_otg;
 	struct timer_list wkp_timer;
 	enum dwc2_lx_state lx_state;
-	struct dwc2_gregs_backup *gr_backup;
-	struct dwc2_dregs_backup *dr_backup;
-	struct dwc2_hregs_backup *hr_backup;
+	struct dwc2_gregs_backup gr_backup;
+	struct dwc2_dregs_backup dr_backup;
+	struct dwc2_hregs_backup hr_backup;
 
 	struct dentry *debug_root;
 	struct debugfs_regset32 *regset;
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index b10377c65064..f845c41fe9e5 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -359,10 +359,9 @@ void dwc2_hcd_stop(struct dwc2_hsotg *hsotg)
 
 /* Caller must hold driver lock */
 static int dwc2_hcd_urb_enqueue(struct dwc2_hsotg *hsotg,
-				struct dwc2_hcd_urb *urb, void **ep_handle,
-				gfp_t mem_flags)
+				struct dwc2_hcd_urb *urb, struct dwc2_qh *qh,
+				struct dwc2_qtd *qtd)
 {
-	struct dwc2_qtd *qtd;
 	u32 intr_mask;
 	int retval;
 	int dev_speed;
@@ -386,18 +385,15 @@ static int dwc2_hcd_urb_enqueue(struct dwc2_hsotg *hsotg,
 			return -ENODEV;
 	}
 
-	qtd = kzalloc(sizeof(*qtd), mem_flags);
 	if (!qtd)
-		return -ENOMEM;
+		return -EINVAL;
 
 	dwc2_hcd_qtd_init(qtd, urb);
-	retval = dwc2_hcd_qtd_add(hsotg, qtd, (struct dwc2_qh **)ep_handle,
-				  mem_flags);
+	retval = dwc2_hcd_qtd_add(hsotg, qtd, qh);
 	if (retval) {
 		dev_err(hsotg->dev,
 			"DWC OTG HCD URB Enqueue failed adding QTD. Error status %d\n",
 			retval);
-		kfree(qtd);
 		return retval;
 	}
 
@@ -2445,6 +2441,9 @@ static int _dwc2_hcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
 	u32 tflags = 0;
 	void *buf;
 	unsigned long flags;
+	struct dwc2_qh *qh;
+	bool qh_allocated = false;
+	struct dwc2_qtd *qtd;
 
 	if (dbg_urb(urb)) {
 		dev_vdbg(hsotg->dev, "DWC OTG HCD URB Enqueue\n");
@@ -2523,15 +2522,32 @@ static int _dwc2_hcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
 						 urb->iso_frame_desc[i].length);
 
 	urb->hcpriv = dwc2_urb;
+	qh = (struct dwc2_qh *) ep->hcpriv;
+	/* Create QH for the endpoint if it doesn't exist */
+	if (!qh) {
+		qh = dwc2_hcd_qh_create(hsotg, dwc2_urb, mem_flags);
+		if (!qh) {
+			retval = -ENOMEM;
+			goto fail0;
+		}
+		ep->hcpriv = qh;
+		qh_allocated = true;
+	}
+
+	qtd = kzalloc(sizeof(*qtd), mem_flags);
+	if (!qtd) {
+		retval = -ENOMEM;
+		goto fail1;
+	}
 
 	spin_lock_irqsave(&hsotg->lock, flags);
 	retval = usb_hcd_link_urb_to_ep(hcd, urb);
 	if (retval)
-		goto fail1;
+		goto fail2;
 
-	retval = dwc2_hcd_urb_enqueue(hsotg, dwc2_urb, &ep->hcpriv, mem_flags);
+	retval = dwc2_hcd_urb_enqueue(hsotg, dwc2_urb, qh, qtd);
 	if (retval)
-		goto fail2;
+		goto fail3;
 
 	if (alloc_bandwidth) {
 		dwc2_allocate_bus_bandwidth(hcd,
@@ -2543,12 +2559,25 @@ static int _dwc2_hcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
 
 	return 0;
 
-fail2:
+fail3:
 	dwc2_urb->priv = NULL;
 	usb_hcd_unlink_urb_from_ep(hcd, urb);
-fail1:
+fail2:
 	spin_unlock_irqrestore(&hsotg->lock, flags);
 	urb->hcpriv = NULL;
+	kfree(qtd);
+fail1:
+	if (qh_allocated) {
+		struct dwc2_qtd *qtd2, *qtd2_tmp;
+
+		ep->hcpriv = NULL;
+		dwc2_hcd_qh_unlink(hsotg, qh);
+		/* Free each QTD in the QH's QTD list */
+		list_for_each_entry_safe(qtd2, qtd2_tmp, &qh->qtd_list,
+							 qtd_list_entry)
+			dwc2_hcd_qtd_unlink_and_free(hsotg, qtd2, qh);
+		dwc2_hcd_qh_free(hsotg, qh);
+	}
 fail0:
 	kfree(dwc2_urb);
 
diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h
index 7b5841c40033..fc1054965552 100644
--- a/drivers/usb/dwc2/hcd.h
+++ b/drivers/usb/dwc2/hcd.h
@@ -463,6 +463,9 @@ extern void dwc2_hcd_queue_transactions(struct dwc2_hsotg *hsotg,
 /* Schedule Queue Functions */
 /* Implemented in hcd_queue.c */
 extern void dwc2_hcd_init_usecs(struct dwc2_hsotg *hsotg);
+extern struct dwc2_qh *dwc2_hcd_qh_create(struct dwc2_hsotg *hsotg,
+					  struct dwc2_hcd_urb *urb,
+					  gfp_t mem_flags);
 extern void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
 extern int dwc2_hcd_qh_add(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
 extern void dwc2_hcd_qh_unlink(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
@@ -471,7 +474,7 @@ extern void dwc2_hcd_qh_deactivate(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
 
 extern void dwc2_hcd_qtd_init(struct dwc2_qtd *qtd, struct dwc2_hcd_urb *urb);
 extern int dwc2_hcd_qtd_add(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd,
-			    struct dwc2_qh **qh, gfp_t mem_flags);
+			    struct dwc2_qh *qh);
 
 /* Unlinks and frees a QTD */
 static inline void dwc2_hcd_qtd_unlink_and_free(struct dwc2_hsotg *hsotg,
diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c
index 9b5c36256627..3ad63d392e13 100644
--- a/drivers/usb/dwc2/hcd_queue.c
+++ b/drivers/usb/dwc2/hcd_queue.c
@@ -191,7 +191,7 @@ static void dwc2_qh_init(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
  *
  * Return: Pointer to the newly allocated QH, or NULL on error
  */
-static struct dwc2_qh *dwc2_hcd_qh_create(struct dwc2_hsotg *hsotg,
+struct dwc2_qh *dwc2_hcd_qh_create(struct dwc2_hsotg *hsotg,
 					  struct dwc2_hcd_urb *urb,
 					  gfp_t mem_flags)
 {
@@ -767,57 +767,32 @@ void dwc2_hcd_qtd_init(struct dwc2_qtd *qtd, struct dwc2_hcd_urb *urb)
  *
  * @hsotg:        The DWC HCD structure
  * @qtd:          The QTD to add
- * @qh:           Out parameter to return queue head
- * @atomic_alloc: Flag to do atomic alloc if needed
+ * @qh:           Queue head to add qtd to
  *
  * Return: 0 if successful, negative error code otherwise
  *
- * Finds the correct QH to place the QTD into. If it does not find a QH, it
- * will create a new QH. If the QH to which the QTD is added is not currently
- * scheduled, it is placed into the proper schedule based on its EP type.
+ * If the QH to which the QTD is added is not currently scheduled, it is placed
+ * into the proper schedule based on its EP type.
  */
 int dwc2_hcd_qtd_add(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd,
-		     struct dwc2_qh **qh, gfp_t mem_flags)
+		     struct dwc2_qh *qh)
 {
-	struct dwc2_hcd_urb *urb = qtd->urb;
-	int allocated = 0;
 	int retval;
 
-	/*
-	 * Get the QH which holds the QTD-list to insert to. Create QH if it
-	 * doesn't exist.
-	 */
-	if (*qh == NULL) {
-		*qh = dwc2_hcd_qh_create(hsotg, urb, mem_flags);
-		if (*qh == NULL)
-			return -ENOMEM;
-		allocated = 1;
+	if (unlikely(!qh)) {
+		dev_err(hsotg->dev, "%s: Invalid QH\n", __func__);
+		retval = -EINVAL;
+		goto fail;
 	}
 
-	retval = dwc2_hcd_qh_add(hsotg, *qh);
+	retval = dwc2_hcd_qh_add(hsotg, qh);
 	if (retval)
 		goto fail;
 
-	qtd->qh = *qh;
-	list_add_tail(&qtd->qtd_list_entry, &(*qh)->qtd_list);
+	qtd->qh = qh;
+	list_add_tail(&qtd->qtd_list_entry, &qh->qtd_list);
 
 	return 0;
-
 fail:
-	if (allocated) {
-		struct dwc2_qtd *qtd2, *qtd2_tmp;
-		struct dwc2_qh *qh_tmp = *qh;
-
-		*qh = NULL;
-		dwc2_hcd_qh_unlink(hsotg, qh_tmp);
-
-		/* Free each QTD in the QH's QTD list */
-		list_for_each_entry_safe(qtd2, qtd2_tmp, &qh_tmp->qtd_list,
-					 qtd_list_entry)
-			dwc2_hcd_qtd_unlink_and_free(hsotg, qtd2, qh_tmp);
-
-		dwc2_hcd_qh_free(hsotg, qh_tmp);
-	}
-
 	return retval;
 }
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 5c110d8e293b..ff5773c66b84 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -446,10 +446,12 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
 	/* Select the HS PHY interface */
 	switch (DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3)) {
 	case DWC3_GHWPARAMS3_HSPHY_IFC_UTMI_ULPI:
-		if (!strncmp(dwc->hsphy_interface, "utmi", 4)) {
+		if (dwc->hsphy_interface &&
+				!strncmp(dwc->hsphy_interface, "utmi", 4)) {
 			reg &= ~DWC3_GUSB2PHYCFG_ULPI_UTMI;
 			break;
-		} else if (!strncmp(dwc->hsphy_interface, "ulpi", 4)) {
+		} else if (dwc->hsphy_interface &&
+				!strncmp(dwc->hsphy_interface, "ulpi", 4)) {
 			reg |= DWC3_GUSB2PHYCFG_ULPI_UTMI;
 			dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
 		} else {
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 2ef3c8d6a9db..69e769c35cf5 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -727,6 +727,10 @@ static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 		dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_ISOCH_DELAY");
 		ret = dwc3_ep0_set_isoch_delay(dwc, ctrl);
 		break;
+	case USB_REQ_SET_INTERFACE:
+		dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_INTERFACE");
+		dwc->start_config_issued = false;
+		/* Fall through */
 	default:
 		dwc3_trace(trace_dwc3_ep0, "Forwarding to gadget driver");
 		ret = dwc3_ep0_delegate_req(dwc, ctrl);
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 4e3447bbd097..58b4657fc721 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1758,10 +1758,13 @@ unknown:
 		 * take such requests too, if that's ever needed:  to work
 		 * in config 0, etc.
 		 */
-		list_for_each_entry(f, &cdev->config->functions, list)
-			if (f->req_match && f->req_match(f, ctrl))
-				goto try_fun_setup;
-		f = NULL;
+		if (cdev->config) {
+			list_for_each_entry(f, &cdev->config->functions, list)
+				if (f->req_match && f->req_match(f, ctrl))
+					goto try_fun_setup;
+			f = NULL;
+		}
+
 		switch (ctrl->bRequestType & USB_RECIP_MASK) {
 		case USB_RECIP_INTERFACE:
 			if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c
index 0495c94a23d7..289e20119fea 100644
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -571,7 +571,7 @@ static struct config_group *function_make(
 	if (IS_ERR(fi))
 		return ERR_CAST(fi);
 
-	ret = config_item_set_name(&fi->group.cg_item, name);
+	ret = config_item_set_name(&fi->group.cg_item, "%s", name);
 	if (ret) {
 		usb_put_function_instance(fi);
 		return ERR_PTR(ret);
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index 45b8c8b338df..6e7be91e6097 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -924,7 +924,8 @@ static ssize_t ffs_epfile_write_iter(struct kiocb *kiocb, struct iov_iter *from)
 
 	kiocb->private = p;
 
-	kiocb_set_cancel_fn(kiocb, ffs_aio_cancel);
+	if (p->aio)
+		kiocb_set_cancel_fn(kiocb, ffs_aio_cancel);
 
 	res = ffs_epfile_io(kiocb->ki_filp, p);
 	if (res == -EIOCBQUEUED)
@@ -968,7 +969,8 @@ static ssize_t ffs_epfile_read_iter(struct kiocb *kiocb, struct iov_iter *to)
 
 	kiocb->private = p;
 
-	kiocb_set_cancel_fn(kiocb, ffs_aio_cancel);
+	if (p->aio)
+		kiocb_set_cancel_fn(kiocb, ffs_aio_cancel);
 
 	res = ffs_epfile_io(kiocb->ki_filp, p);
 	if (res == -EIOCBQUEUED)
diff --git a/drivers/usb/gadget/function/f_mass_storage.c b/drivers/usb/gadget/function/f_mass_storage.c
index d2259c663996..f936268d26c6 100644
--- a/drivers/usb/gadget/function/f_mass_storage.c
+++ b/drivers/usb/gadget/function/f_mass_storage.c
@@ -2786,7 +2786,7 @@ int fsg_common_set_nluns(struct fsg_common *common, int nluns)
 		return -EINVAL;
 	}
 
-	curlun = kcalloc(nluns, sizeof(*curlun), GFP_KERNEL);
+	curlun = kcalloc(FSG_MAX_LUNS, sizeof(*curlun), GFP_KERNEL);
 	if (unlikely(!curlun))
 		return -ENOMEM;
 
@@ -2796,8 +2796,6 @@ int fsg_common_set_nluns(struct fsg_common *common, int nluns)
 	common->luns = curlun;
 	common->nluns = nluns;
 
-	pr_info("Number of LUNs=%d\n", common->nluns);
-
 	return 0;
 }
 EXPORT_SYMBOL_GPL(fsg_common_set_nluns);
@@ -3563,14 +3561,26 @@ static struct usb_function *fsg_alloc(struct usb_function_instance *fi)
 	struct fsg_opts *opts = fsg_opts_from_func_inst(fi);
 	struct fsg_common *common = opts->common;
 	struct fsg_dev *fsg;
+	unsigned nluns, i;
 
 	fsg = kzalloc(sizeof(*fsg), GFP_KERNEL);
 	if (unlikely(!fsg))
 		return ERR_PTR(-ENOMEM);
 
 	mutex_lock(&opts->lock);
+	if (!opts->refcnt) {
+		for (nluns = i = 0; i < FSG_MAX_LUNS; ++i)
+			if (common->luns[i])
+				nluns = i + 1;
+		if (!nluns)
+			pr_warn("No LUNS defined, continuing anyway\n");
+		else
+			common->nluns = nluns;
+		pr_info("Number of LUNs=%u\n", common->nluns);
+	}
 	opts->refcnt++;
 	mutex_unlock(&opts->lock);
+
 	fsg->function.name	= FSG_DRIVER_DESC;
 	fsg->function.bind	= fsg_bind;
 	fsg->function.unbind	= fsg_unbind;
diff --git a/drivers/usb/gadget/function/f_midi.c b/drivers/usb/gadget/function/f_midi.c
index 6316aa5b1c49..ad50a67c1465 100644
--- a/drivers/usb/gadget/function/f_midi.c
+++ b/drivers/usb/gadget/function/f_midi.c
@@ -1145,7 +1145,7 @@ static struct usb_function *f_midi_alloc(struct usb_function_instance *fi)
 	if (opts->id && !midi->id) {
 		status = -ENOMEM;
 		mutex_unlock(&opts->lock);
-		goto kstrdup_fail;
+		goto setup_fail;
 	}
 	midi->in_ports = opts->in_ports;
 	midi->out_ports = opts->out_ports;
@@ -1164,8 +1164,6 @@ static struct usb_function *f_midi_alloc(struct usb_function_instance *fi)
 
 	return &midi->func;
 
-kstrdup_fail:
-	f_midi_unregister_card(midi);
 setup_fail:
 	for (--i; i >= 0; i--)
 		kfree(midi->in_port[i]);
diff --git a/drivers/usb/gadget/udc/fotg210-udc.c b/drivers/usb/gadget/udc/fotg210-udc.c
index e547ea7f56b1..1137e3384218 100644
--- a/drivers/usb/gadget/udc/fotg210-udc.c
+++ b/drivers/usb/gadget/udc/fotg210-udc.c
@@ -1171,7 +1171,7 @@ static int fotg210_udc_probe(struct platform_device *pdev)
 			  udc_name, fotg210);
 	if (ret < 0) {
 		pr_err("request_irq error (%d)\n", ret);
-		goto err_irq;
+		goto err_req;
 	}
 
 	ret = usb_add_gadget_udc(&pdev->dev, &fotg210->gadget);
@@ -1183,7 +1183,6 @@ static int fotg210_udc_probe(struct platform_device *pdev)
 	return 0;
 
 err_add_udc:
-err_irq:
 	free_irq(ires->start, fotg210);
 
 err_req:
diff --git a/drivers/usb/gadget/udc/mv_udc_core.c b/drivers/usb/gadget/udc/mv_udc_core.c
index d32160d6463f..5da37c957b53 100644
--- a/drivers/usb/gadget/udc/mv_udc_core.c
+++ b/drivers/usb/gadget/udc/mv_udc_core.c
@@ -2167,7 +2167,7 @@ static int mv_udc_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	udc->phy_regs = ioremap(r->start, resource_size(r));
+	udc->phy_regs = devm_ioremap(&pdev->dev, r->start, resource_size(r));
 	if (udc->phy_regs == NULL) {
 		dev_err(&pdev->dev, "failed to map phy I/O memory\n");
 		return -EBUSY;
diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c
index d69c35558f68..362ee8af5fce 100644
--- a/drivers/usb/gadget/udc/udc-core.c
+++ b/drivers/usb/gadget/udc/udc-core.c
@@ -60,13 +60,15 @@ static DEFINE_MUTEX(udc_lock);
 int usb_gadget_map_request(struct usb_gadget *gadget,
 		struct usb_request *req, int is_in)
 {
+	struct device *dev = gadget->dev.parent;
+
 	if (req->length == 0)
 		return 0;
 
 	if (req->num_sgs) {
 		int     mapped;
 
-		mapped = dma_map_sg(&gadget->dev, req->sg, req->num_sgs,
+		mapped = dma_map_sg(dev, req->sg, req->num_sgs,
 				is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
 		if (mapped == 0) {
 			dev_err(&gadget->dev, "failed to map SGs\n");
@@ -75,11 +77,11 @@ int usb_gadget_map_request(struct usb_gadget *gadget,
 
 		req->num_mapped_sgs = mapped;
 	} else {
-		req->dma = dma_map_single(&gadget->dev, req->buf, req->length,
+		req->dma = dma_map_single(dev, req->buf, req->length,
 				is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
 
-		if (dma_mapping_error(&gadget->dev, req->dma)) {
-			dev_err(&gadget->dev, "failed to map buffer\n");
+		if (dma_mapping_error(dev, req->dma)) {
+			dev_err(dev, "failed to map buffer\n");
 			return -EFAULT;
 		}
 	}
@@ -95,12 +97,12 @@ void usb_gadget_unmap_request(struct usb_gadget *gadget,
 		return;
 
 	if (req->num_mapped_sgs) {
-		dma_unmap_sg(&gadget->dev, req->sg, req->num_mapped_sgs,
+		dma_unmap_sg(gadget->dev.parent, req->sg, req->num_mapped_sgs,
 				is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
 
 		req->num_mapped_sgs = 0;
 	} else {
-		dma_unmap_single(&gadget->dev, req->dma, req->length,
+		dma_unmap_single(gadget->dev.parent, req->dma, req->length,
 				is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
 	}
 }
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index f7d561ed3c23..d029bbe9eb36 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -981,10 +981,6 @@ rescan_all:
 		int			completed, modified;
 		__hc32			*prev;
 
-		/* Is this ED already invisible to the hardware? */
-		if (ed->state == ED_IDLE)
-			goto ed_idle;
-
 		/* only take off EDs that the HC isn't using, accounting for
 		 * frame counter wraps and EDs with partially retired TDs
 		 */
@@ -1012,12 +1008,10 @@ skip_ed:
 		}
 
 		/* ED's now officially unlinked, hc doesn't see */
-		ed->state = ED_IDLE;
 		ed->hwHeadP &= ~cpu_to_hc32(ohci, ED_H);
 		ed->hwNextED = 0;
 		wmb();
 		ed->hwINFO &= ~cpu_to_hc32(ohci, ED_SKIP | ED_DEQUEUE);
-ed_idle:
 
 		/* reentrancy:  if we drop the schedule lock, someone might
 		 * have modified this list.  normally it's just prepending
@@ -1088,6 +1082,7 @@ rescan_this:
 		if (list_empty(&ed->td_list)) {
 			*last = ed->ed_next;
 			ed->ed_next = NULL;
+			ed->state = ED_IDLE;
 			list_del(&ed->in_use_list);
 		} else if (ohci->rh_state == OHCI_RH_RUNNING) {
 			*last = ed->ed_next;
diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c
index e9a6eec39142..cfcfadfc94fc 100644
--- a/drivers/usb/host/ohci-tmio.c
+++ b/drivers/usb/host/ohci-tmio.c
@@ -58,7 +58,7 @@
 #define CCR_PM_CKRNEN    0x0002
 #define CCR_PM_USBPW1    0x0004
 #define CCR_PM_USBPW2    0x0008
-#define CCR_PM_USBPW3    0x0008
+#define CCR_PM_USBPW3    0x0010
 #define CCR_PM_PMEE      0x0100
 #define CCR_PM_PMES      0x8000
 
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index e75c565feb53..78241b5550df 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -484,10 +484,13 @@ static void xhci_hub_report_usb3_link_state(struct xhci_hcd *xhci,
 	u32 pls = status_reg & PORT_PLS_MASK;
 
 	/* resume state is a xHCI internal state.
-	 * Do not report it to usb core.
+	 * Do not report it to usb core, instead, pretend to be U3,
+	 * thus usb core knows it's not ready for transfer
 	 */
-	if (pls == XDEV_RESUME)
+	if (pls == XDEV_RESUME) {
+		*status |= USB_SS_PORT_LS_U3;
 		return;
+	}
 
 	/* When the CAS bit is set then warm reset
 	 * should be performed on port
@@ -588,7 +591,14 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
 		status |= USB_PORT_STAT_C_RESET << 16;
 	/* USB3.0 only */
 	if (hcd->speed == HCD_USB3) {
-		if ((raw_port_status & PORT_PLC))
+		/* Port link change with port in resume state should not be
+		 * reported to usbcore, as this is an internal state to be
+		 * handled by xhci driver. Reporting PLC to usbcore may
+		 * cause usbcore clearing PLC first and port change event
+		 * irq won't be generated.
+		 */
+		if ((raw_port_status & PORT_PLC) &&
+			(raw_port_status & PORT_PLS_MASK) != XDEV_RESUME)
 			status |= USB_PORT_STAT_C_LINK_STATE << 16;
 		if ((raw_port_status & PORT_WRC))
 			status |= USB_PORT_STAT_C_BH_RESET << 16;
@@ -1120,10 +1130,10 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 	spin_lock_irqsave(&xhci->lock, flags);
 
 	if (hcd->self.root_hub->do_remote_wakeup) {
-		if (bus_state->resuming_ports) {
+		if (bus_state->resuming_ports ||	/* USB2 */
+		    bus_state->port_remote_wakeup) {	/* USB3 */
 			spin_unlock_irqrestore(&xhci->lock, flags);
-			xhci_dbg(xhci, "suspend failed because "
-						"a port is resuming\n");
+			xhci_dbg(xhci, "suspend failed because a port is resuming\n");
 			return -EBUSY;
 		}
 	}
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index f8336408ef07..3e442f77a2b9 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1427,10 +1427,10 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 		/* Attempt to use the ring cache */
 		if (virt_dev->num_rings_cached == 0)
 			return -ENOMEM;
+		virt_dev->num_rings_cached--;
 		virt_dev->eps[ep_index].new_ring =
 			virt_dev->ring_cache[virt_dev->num_rings_cached];
 		virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL;
-		virt_dev->num_rings_cached--;
 		xhci_reinit_cached_ring(xhci, virt_dev->eps[ep_index].new_ring,
 					1, type);
 	}
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 4a4cb1d91ac8..5590eac2b22d 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -23,10 +23,15 @@
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/module.h>
+#include <linux/acpi.h>
 
 #include "xhci.h"
 #include "xhci-trace.h"
 
+#define PORT2_SSIC_CONFIG_REG2	0x883c
+#define PROG_DONE		(1 << 30)
+#define SSIC_PORT_UNUSED	(1 << 31)
+
 /* Device for a quirk */
 #define PCI_VENDOR_ID_FRESCO_LOGIC	0x1b73
 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK	0x1000
@@ -176,20 +181,63 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 }
 
 /*
+ * In some Intel xHCI controllers, in order to get D3 working,
+ * through a vendor specific SSIC CONFIG register at offset 0x883c,
+ * SSIC PORT need to be marked as "unused" before putting xHCI
+ * into D3. After D3 exit, the SSIC port need to be marked as "used".
+ * Without this change, xHCI might not enter D3 state.
  * Make sure PME works on some Intel xHCI controllers by writing 1 to clear
  * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
  */
-static void xhci_pme_quirk(struct xhci_hcd *xhci)
+static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend)
 {
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
 	u32 val;
 	void __iomem *reg;
 
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+		 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) {
+
+		reg = (void __iomem *) xhci->cap_regs + PORT2_SSIC_CONFIG_REG2;
+
+		/* Notify SSIC that SSIC profile programming is not done */
+		val = readl(reg) & ~PROG_DONE;
+		writel(val, reg);
+
+		/* Mark SSIC port as unused(suspend) or used(resume) */
+		val = readl(reg);
+		if (suspend)
+			val |= SSIC_PORT_UNUSED;
+		else
+			val &= ~SSIC_PORT_UNUSED;
+		writel(val, reg);
+
+		/* Notify SSIC that SSIC profile programming is done */
+		val = readl(reg) | PROG_DONE;
+		writel(val, reg);
+		readl(reg);
+	}
+
 	reg = (void __iomem *) xhci->cap_regs + 0x80a4;
 	val = readl(reg);
 	writel(val | BIT(28), reg);
 	readl(reg);
 }
 
+#ifdef CONFIG_ACPI
+static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev)
+{
+	static const u8 intel_dsm_uuid[] = {
+		0xb7, 0x0c, 0x34, 0xac,	0x01, 0xe9, 0xbf, 0x45,
+		0xb7, 0xe6, 0x2b, 0x34, 0xec, 0x93, 0x1e, 0x23,
+	};
+	acpi_evaluate_dsm(ACPI_HANDLE(&dev->dev), intel_dsm_uuid, 3, 1, NULL);
+}
+#else
+	static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
+#endif /* CONFIG_ACPI */
+
 /* called during probe() after chip reset completes */
 static int xhci_pci_setup(struct usb_hcd *hcd)
 {
@@ -263,6 +311,9 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 			HCC_MAX_PSA(xhci->hcc_params) >= 4)
 		xhci->shared_hcd->can_do_streams = 1;
 
+	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
+		xhci_pme_acpi_rtd3_enable(dev);
+
 	/* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */
 	pm_runtime_put_noidle(&dev->dev);
 
@@ -307,7 +358,7 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 		pdev->no_d3cold = true;
 
 	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
-		xhci_pme_quirk(xhci);
+		xhci_pme_quirk(hcd, true);
 
 	return xhci_suspend(xhci, do_wakeup);
 }
@@ -340,7 +391,7 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 		usb_enable_intel_xhci_ports(pdev);
 
 	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
-		xhci_pme_quirk(xhci);
+		xhci_pme_quirk(hcd, false);
 
 	retval = xhci_resume(xhci, hibernated);
 	return retval;
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 94416ff70810..6a8fc52aed58 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1546,6 +1546,9 @@ static void handle_port_status(struct xhci_hcd *xhci,
 		usb_hcd_resume_root_hub(hcd);
 	}
 
+	if (hcd->speed == HCD_USB3 && (temp & PORT_PLS_MASK) == XDEV_INACTIVE)
+		bus_state->port_remote_wakeup &= ~(1 << faked_port_index);
+
 	if ((temp & PORT_PLC) && (temp & PORT_PLS_MASK) == XDEV_RESUME) {
 		xhci_dbg(xhci, "port resume event for port %d\n", port_id);
 
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 7da0d6043d33..526ebc0c7e72 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3453,6 +3453,9 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
 			return -EINVAL;
 	}
 
+	if (virt_dev->tt_info)
+		old_active_eps = virt_dev->tt_info->active_eps;
+
 	if (virt_dev->udev != udev) {
 		/* If the virt_dev and the udev does not match, this virt_dev
 		 * may belong to another udev.
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 31e46cc55807..ed2ebf647c38 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -285,6 +285,7 @@ struct xhci_op_regs {
 #define XDEV_U0		(0x0 << 5)
 #define XDEV_U2		(0x2 << 5)
 #define XDEV_U3		(0x3 << 5)
+#define XDEV_INACTIVE	(0x6 << 5)
 #define XDEV_RESUME	(0xf << 5)
 /* true: port has power (see HCC_PPC) */
 #define PORT_POWER	(1 << 9)
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index 30842bc195f5..92d5f718659b 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -275,9 +275,7 @@ static int musb_has_gadget(struct musb *musb)
 #ifdef CONFIG_USB_MUSB_HOST
 	return 1;
 #else
-	if (musb->port_mode == MUSB_PORT_MODE_HOST)
-		return 1;
-	return musb->g.dev.driver != NULL;
+	return musb->port_mode == MUSB_PORT_MODE_HOST;
 #endif
 }
 
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index 8f7cb068d29b..3fcc0483a081 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -217,6 +217,9 @@ static bool mxs_phy_get_vbus_status(struct mxs_phy *mxs_phy)
 {
 	unsigned int vbus_value;
 
+	if (!mxs_phy->regmap_anatop)
+		return false;
+
 	if (mxs_phy->port_id == 0)
 		regmap_read(mxs_phy->regmap_anatop,
 			ANADIG_USB1_VBUS_DET_STAT,
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index ffd739e31bfc..eac7ccaa3c85 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -187,6 +187,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */
 	{ USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */
 	{ USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */
+	{ USB_DEVICE(0x2626, 0xEA60) }, /* Aruba Networks 7xxx USB Serial Console */
 	{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
 	{ USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
 	{ USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 4f70df33975a..78b4f64c6b00 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -121,26 +121,26 @@ static DEFINE_SPINLOCK(release_lock);
 static const unsigned int dummy; /* for clarity in register access fns */
 
 enum mos_regs {
-	THR,	          /* serial port regs */
-	RHR,
-	IER,
-	FCR,
-	ISR,
-	LCR,
-	MCR,
-	LSR,
-	MSR,
-	SPR,
-	DLL,
-	DLM,
-	DPR,              /* parallel port regs */
-	DSR,
-	DCR,
-	ECR,
-	SP1_REG,          /* device control regs */
-	SP2_REG,          /* serial port 2 (7720 only) */
-	PP_REG,
-	SP_CONTROL_REG,
+	MOS7720_THR,		  /* serial port regs */
+	MOS7720_RHR,
+	MOS7720_IER,
+	MOS7720_FCR,
+	MOS7720_ISR,
+	MOS7720_LCR,
+	MOS7720_MCR,
+	MOS7720_LSR,
+	MOS7720_MSR,
+	MOS7720_SPR,
+	MOS7720_DLL,
+	MOS7720_DLM,
+	MOS7720_DPR,		  /* parallel port regs */
+	MOS7720_DSR,
+	MOS7720_DCR,
+	MOS7720_ECR,
+	MOS7720_SP1_REG,	  /* device control regs */
+	MOS7720_SP2_REG,	  /* serial port 2 (7720 only) */
+	MOS7720_PP_REG,
+	MOS7720_SP_CONTROL_REG,
 };
 
 /*
@@ -150,26 +150,26 @@ enum mos_regs {
 static inline __u16 get_reg_index(enum mos_regs reg)
 {
 	static const __u16 mos7715_index_lookup_table[] = {
-		0x00,		/* THR */
-		0x00,		/* RHR */
-		0x01,		/* IER */
-		0x02,		/* FCR */
-		0x02,		/* ISR */
-		0x03,		/* LCR */
-		0x04,		/* MCR */
-		0x05,		/* LSR */
-		0x06,		/* MSR */
-		0x07,		/* SPR */
-		0x00,		/* DLL */
-		0x01,		/* DLM */
-		0x00,		/* DPR */
-		0x01,		/* DSR */
-		0x02,		/* DCR */
-		0x0a,		/* ECR */
-		0x01,		/* SP1_REG */
-		0x02,		/* SP2_REG (7720 only) */
-		0x04,		/* PP_REG (7715 only) */
-		0x08,		/* SP_CONTROL_REG */
+		0x00,		/* MOS7720_THR */
+		0x00,		/* MOS7720_RHR */
+		0x01,		/* MOS7720_IER */
+		0x02,		/* MOS7720_FCR */
+		0x02,		/* MOS7720_ISR */
+		0x03,		/* MOS7720_LCR */
+		0x04,		/* MOS7720_MCR */
+		0x05,		/* MOS7720_LSR */
+		0x06,		/* MOS7720_MSR */
+		0x07,		/* MOS7720_SPR */
+		0x00,		/* MOS7720_DLL */
+		0x01,		/* MOS7720_DLM */
+		0x00,		/* MOS7720_DPR */
+		0x01,		/* MOS7720_DSR */
+		0x02,		/* MOS7720_DCR */
+		0x0a,		/* MOS7720_ECR */
+		0x01,		/* MOS7720_SP1_REG */
+		0x02,		/* MOS7720_SP2_REG (7720 only) */
+		0x04,		/* MOS7720_PP_REG (7715 only) */
+		0x08,		/* MOS7720_SP_CONTROL_REG */
 	};
 	return mos7715_index_lookup_table[reg];
 }
@@ -181,10 +181,10 @@ static inline __u16 get_reg_index(enum mos_regs reg)
 static inline __u16 get_reg_value(enum mos_regs reg,
 				  unsigned int serial_portnum)
 {
-	if (reg >= SP1_REG)	      /* control reg */
+	if (reg >= MOS7720_SP1_REG)	/* control reg */
 		return 0x0000;
 
-	else if (reg >= DPR)	      /* parallel port reg (7715 only) */
+	else if (reg >= MOS7720_DPR)	/* parallel port reg (7715 only) */
 		return 0x0100;
 
 	else			      /* serial port reg */
@@ -252,7 +252,8 @@ static inline int mos7715_change_mode(struct mos7715_parport *mos_parport,
 				      enum mos7715_pp_modes mode)
 {
 	mos_parport->shadowECR = mode;
-	write_mos_reg(mos_parport->serial, dummy, ECR, mos_parport->shadowECR);
+	write_mos_reg(mos_parport->serial, dummy, MOS7720_ECR,
+		      mos_parport->shadowECR);
 	return 0;
 }
 
@@ -486,7 +487,7 @@ static void parport_mos7715_write_data(struct parport *pp, unsigned char d)
 	if (parport_prologue(pp) < 0)
 		return;
 	mos7715_change_mode(mos_parport, SPP);
-	write_mos_reg(mos_parport->serial, dummy, DPR, (__u8)d);
+	write_mos_reg(mos_parport->serial, dummy, MOS7720_DPR, (__u8)d);
 	parport_epilogue(pp);
 }
 
@@ -497,7 +498,7 @@ static unsigned char parport_mos7715_read_data(struct parport *pp)
 
 	if (parport_prologue(pp) < 0)
 		return 0;
-	read_mos_reg(mos_parport->serial, dummy, DPR, &d);
+	read_mos_reg(mos_parport->serial, dummy, MOS7720_DPR, &d);
 	parport_epilogue(pp);
 	return d;
 }
@@ -510,7 +511,7 @@ static void parport_mos7715_write_control(struct parport *pp, unsigned char d)
 	if (parport_prologue(pp) < 0)
 		return;
 	data = ((__u8)d & 0x0f) | (mos_parport->shadowDCR & 0xf0);
-	write_mos_reg(mos_parport->serial, dummy, DCR, data);
+	write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR, data);
 	mos_parport->shadowDCR = data;
 	parport_epilogue(pp);
 }
@@ -543,7 +544,8 @@ static unsigned char parport_mos7715_frob_control(struct parport *pp,
 	if (parport_prologue(pp) < 0)
 		return 0;
 	mos_parport->shadowDCR = (mos_parport->shadowDCR & (~mask)) ^ val;
-	write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR);
+	write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR,
+		      mos_parport->shadowDCR);
 	dcr = mos_parport->shadowDCR & 0x0f;
 	parport_epilogue(pp);
 	return dcr;
@@ -581,7 +583,8 @@ static void parport_mos7715_data_forward(struct parport *pp)
 		return;
 	mos7715_change_mode(mos_parport, PS2);
 	mos_parport->shadowDCR &=  ~0x20;
-	write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR);
+	write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR,
+		      mos_parport->shadowDCR);
 	parport_epilogue(pp);
 }
 
@@ -593,7 +596,8 @@ static void parport_mos7715_data_reverse(struct parport *pp)
 		return;
 	mos7715_change_mode(mos_parport, PS2);
 	mos_parport->shadowDCR |= 0x20;
-	write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR);
+	write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR,
+		      mos_parport->shadowDCR);
 	parport_epilogue(pp);
 }
 
@@ -633,8 +637,10 @@ static void parport_mos7715_restore_state(struct parport *pp,
 		spin_unlock(&release_lock);
 		return;
 	}
-	write_parport_reg_nonblock(mos_parport, DCR, mos_parport->shadowDCR);
-	write_parport_reg_nonblock(mos_parport, ECR, mos_parport->shadowECR);
+	write_parport_reg_nonblock(mos_parport, MOS7720_DCR,
+				   mos_parport->shadowDCR);
+	write_parport_reg_nonblock(mos_parport, MOS7720_ECR,
+				   mos_parport->shadowECR);
 	spin_unlock(&release_lock);
 }
 
@@ -714,14 +720,16 @@ static int mos7715_parport_init(struct usb_serial *serial)
 	init_completion(&mos_parport->syncmsg_compl);
 
 	/* cycle parallel port reset bit */
-	write_mos_reg(mos_parport->serial, dummy, PP_REG, (__u8)0x80);
-	write_mos_reg(mos_parport->serial, dummy, PP_REG, (__u8)0x00);
+	write_mos_reg(mos_parport->serial, dummy, MOS7720_PP_REG, (__u8)0x80);
+	write_mos_reg(mos_parport->serial, dummy, MOS7720_PP_REG, (__u8)0x00);
 
 	/* initialize device registers */
 	mos_parport->shadowDCR = DCR_INIT_VAL;
-	write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR);
+	write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR,
+		      mos_parport->shadowDCR);
 	mos_parport->shadowECR = ECR_INIT_VAL;
-	write_mos_reg(mos_parport->serial, dummy, ECR, mos_parport->shadowECR);
+	write_mos_reg(mos_parport->serial, dummy, MOS7720_ECR,
+		      mos_parport->shadowECR);
 
 	/* register with parport core */
 	mos_parport->pp = parport_register_port(0, PARPORT_IRQ_NONE,
@@ -1033,45 +1041,49 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
 	 /* Initialize MCS7720 -- Write Init values to corresponding Registers
 	  *
 	  * Register Index
-	  * 0 : THR/RHR
-	  * 1 : IER
-	  * 2 : FCR
-	  * 3 : LCR
-	  * 4 : MCR
-	  * 5 : LSR
-	  * 6 : MSR
-	  * 7 : SPR
+	  * 0 : MOS7720_THR/MOS7720_RHR
+	  * 1 : MOS7720_IER
+	  * 2 : MOS7720_FCR
+	  * 3 : MOS7720_LCR
+	  * 4 : MOS7720_MCR
+	  * 5 : MOS7720_LSR
+	  * 6 : MOS7720_MSR
+	  * 7 : MOS7720_SPR
 	  *
 	  * 0x08 : SP1/2 Control Reg
 	  */
 	port_number = port->port_number;
-	read_mos_reg(serial, port_number, LSR, &data);
+	read_mos_reg(serial, port_number, MOS7720_LSR, &data);
 
 	dev_dbg(&port->dev, "SS::%p LSR:%x\n", mos7720_port, data);
 
-	write_mos_reg(serial, dummy, SP1_REG, 0x02);
-	write_mos_reg(serial, dummy, SP2_REG, 0x02);
+	write_mos_reg(serial, dummy, MOS7720_SP1_REG, 0x02);
+	write_mos_reg(serial, dummy, MOS7720_SP2_REG, 0x02);
 
-	write_mos_reg(serial, port_number, IER, 0x00);
-	write_mos_reg(serial, port_number, FCR, 0x00);
+	write_mos_reg(serial, port_number, MOS7720_IER, 0x00);
+	write_mos_reg(serial, port_number, MOS7720_FCR, 0x00);
 
-	write_mos_reg(serial, port_number, FCR, 0xcf);
+	write_mos_reg(serial, port_number, MOS7720_FCR, 0xcf);
 	mos7720_port->shadowLCR = 0x03;
-	write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
+	write_mos_reg(serial, port_number, MOS7720_LCR,
+		      mos7720_port->shadowLCR);
 	mos7720_port->shadowMCR = 0x0b;
-	write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR);
+	write_mos_reg(serial, port_number, MOS7720_MCR,
+		      mos7720_port->shadowMCR);
 
-	write_mos_reg(serial, port_number, SP_CONTROL_REG, 0x00);
-	read_mos_reg(serial, dummy, SP_CONTROL_REG, &data);
+	write_mos_reg(serial, port_number, MOS7720_SP_CONTROL_REG, 0x00);
+	read_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG, &data);
 	data = data | (port->port_number + 1);
-	write_mos_reg(serial, dummy, SP_CONTROL_REG, data);
+	write_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG, data);
 	mos7720_port->shadowLCR = 0x83;
-	write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
-	write_mos_reg(serial, port_number, THR, 0x0c);
-	write_mos_reg(serial, port_number, IER, 0x00);
+	write_mos_reg(serial, port_number, MOS7720_LCR,
+		      mos7720_port->shadowLCR);
+	write_mos_reg(serial, port_number, MOS7720_THR, 0x0c);
+	write_mos_reg(serial, port_number, MOS7720_IER, 0x00);
 	mos7720_port->shadowLCR = 0x03;
-	write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
-	write_mos_reg(serial, port_number, IER, 0x0c);
+	write_mos_reg(serial, port_number, MOS7720_LCR,
+		      mos7720_port->shadowLCR);
+	write_mos_reg(serial, port_number, MOS7720_IER, 0x0c);
 
 	response = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (response)
@@ -1144,8 +1156,8 @@ static void mos7720_close(struct usb_serial_port *port)
 	usb_kill_urb(port->write_urb);
 	usb_kill_urb(port->read_urb);
 
-	write_mos_reg(serial, port->port_number, MCR, 0x00);
-	write_mos_reg(serial, port->port_number, IER, 0x00);
+	write_mos_reg(serial, port->port_number, MOS7720_MCR, 0x00);
+	write_mos_reg(serial, port->port_number, MOS7720_IER, 0x00);
 
 	mos7720_port->open = 0;
 }
@@ -1169,7 +1181,8 @@ static void mos7720_break(struct tty_struct *tty, int break_state)
 		data = mos7720_port->shadowLCR & ~UART_LCR_SBC;
 
 	mos7720_port->shadowLCR  = data;
-	write_mos_reg(serial, port->port_number, LCR, mos7720_port->shadowLCR);
+	write_mos_reg(serial, port->port_number, MOS7720_LCR,
+		      mos7720_port->shadowLCR);
 }
 
 /*
@@ -1297,7 +1310,7 @@ static void mos7720_throttle(struct tty_struct *tty)
 	/* if we are implementing RTS/CTS, toggle that line */
 	if (tty->termios.c_cflag & CRTSCTS) {
 		mos7720_port->shadowMCR &= ~UART_MCR_RTS;
-		write_mos_reg(port->serial, port->port_number, MCR,
+		write_mos_reg(port->serial, port->port_number, MOS7720_MCR,
 			      mos7720_port->shadowMCR);
 	}
 }
@@ -1327,7 +1340,7 @@ static void mos7720_unthrottle(struct tty_struct *tty)
 	/* if we are implementing RTS/CTS, toggle that line */
 	if (tty->termios.c_cflag & CRTSCTS) {
 		mos7720_port->shadowMCR |= UART_MCR_RTS;
-		write_mos_reg(port->serial, port->port_number, MCR,
+		write_mos_reg(port->serial, port->port_number, MOS7720_MCR,
 			      mos7720_port->shadowMCR);
 	}
 }
@@ -1352,35 +1365,39 @@ static int set_higher_rates(struct moschip_port *mos7720_port,
 	dev_dbg(&port->dev, "Sending Setting Commands ..........\n");
 	port_number = port->port_number;
 
-	write_mos_reg(serial, port_number, IER, 0x00);
-	write_mos_reg(serial, port_number, FCR, 0x00);
-	write_mos_reg(serial, port_number, FCR, 0xcf);
+	write_mos_reg(serial, port_number, MOS7720_IER, 0x00);
+	write_mos_reg(serial, port_number, MOS7720_FCR, 0x00);
+	write_mos_reg(serial, port_number, MOS7720_FCR, 0xcf);
 	mos7720_port->shadowMCR = 0x0b;
-	write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR);
-	write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x00);
+	write_mos_reg(serial, port_number, MOS7720_MCR,
+		      mos7720_port->shadowMCR);
+	write_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG, 0x00);
 
 	/***********************************************
 	 *              Set for higher rates           *
 	 ***********************************************/
 	/* writing baud rate verbatum into uart clock field clearly not right */
 	if (port_number == 0)
-		sp_reg = SP1_REG;
+		sp_reg = MOS7720_SP1_REG;
 	else
-		sp_reg = SP2_REG;
+		sp_reg = MOS7720_SP2_REG;
 	write_mos_reg(serial, dummy, sp_reg, baud * 0x10);
-	write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x03);
+	write_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG, 0x03);
 	mos7720_port->shadowMCR = 0x2b;
-	write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR);
+	write_mos_reg(serial, port_number, MOS7720_MCR,
+		      mos7720_port->shadowMCR);
 
 	/***********************************************
 	 *              Set DLL/DLM
 	 ***********************************************/
 	mos7720_port->shadowLCR = mos7720_port->shadowLCR | UART_LCR_DLAB;
-	write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
-	write_mos_reg(serial, port_number, DLL, 0x01);
-	write_mos_reg(serial, port_number, DLM, 0x00);
+	write_mos_reg(serial, port_number, MOS7720_LCR,
+		      mos7720_port->shadowLCR);
+	write_mos_reg(serial, port_number, MOS7720_DLL, 0x01);
+	write_mos_reg(serial, port_number, MOS7720_DLM, 0x00);
 	mos7720_port->shadowLCR = mos7720_port->shadowLCR & ~UART_LCR_DLAB;
-	write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
+	write_mos_reg(serial, port_number, MOS7720_LCR,
+		      mos7720_port->shadowLCR);
 
 	return 0;
 }
@@ -1488,15 +1505,16 @@ static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port,
 
 	/* Enable access to divisor latch */
 	mos7720_port->shadowLCR = mos7720_port->shadowLCR | UART_LCR_DLAB;
-	write_mos_reg(serial, number, LCR, mos7720_port->shadowLCR);
+	write_mos_reg(serial, number, MOS7720_LCR, mos7720_port->shadowLCR);
 
 	/* Write the divisor */
-	write_mos_reg(serial, number, DLL, (__u8)(divisor & 0xff));
-	write_mos_reg(serial, number, DLM, (__u8)((divisor & 0xff00) >> 8));
+	write_mos_reg(serial, number, MOS7720_DLL, (__u8)(divisor & 0xff));
+	write_mos_reg(serial, number, MOS7720_DLM,
+		      (__u8)((divisor & 0xff00) >> 8));
 
 	/* Disable access to divisor latch */
 	mos7720_port->shadowLCR = mos7720_port->shadowLCR & ~UART_LCR_DLAB;
-	write_mos_reg(serial, number, LCR, mos7720_port->shadowLCR);
+	write_mos_reg(serial, number, MOS7720_LCR, mos7720_port->shadowLCR);
 
 	return status;
 }
@@ -1600,14 +1618,16 @@ static void change_port_settings(struct tty_struct *tty,
 
 
 	/* Disable Interrupts */
-	write_mos_reg(serial, port_number, IER, 0x00);
-	write_mos_reg(serial, port_number, FCR, 0x00);
-	write_mos_reg(serial, port_number, FCR, 0xcf);
+	write_mos_reg(serial, port_number, MOS7720_IER, 0x00);
+	write_mos_reg(serial, port_number, MOS7720_FCR, 0x00);
+	write_mos_reg(serial, port_number, MOS7720_FCR, 0xcf);
 
 	/* Send the updated LCR value to the mos7720 */
-	write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
+	write_mos_reg(serial, port_number, MOS7720_LCR,
+		      mos7720_port->shadowLCR);
 	mos7720_port->shadowMCR = 0x0b;
-	write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR);
+	write_mos_reg(serial, port_number, MOS7720_MCR,
+		      mos7720_port->shadowMCR);
 
 	/* set up the MCR register and send it to the mos7720 */
 	mos7720_port->shadowMCR = UART_MCR_OUT2;
@@ -1619,14 +1639,17 @@ static void change_port_settings(struct tty_struct *tty,
 		/* To set hardware flow control to the specified *
 		 * serial port, in SP1/2_CONTROL_REG             */
 		if (port_number)
-			write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x01);
+			write_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG,
+				      0x01);
 		else
-			write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x02);
+			write_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG,
+				      0x02);
 
 	} else
 		mos7720_port->shadowMCR &= ~(UART_MCR_XONANY);
 
-	write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR);
+	write_mos_reg(serial, port_number, MOS7720_MCR,
+		      mos7720_port->shadowMCR);
 
 	/* Determine divisor based on baud rate */
 	baud = tty_get_baud_rate(tty);
@@ -1639,7 +1662,7 @@ static void change_port_settings(struct tty_struct *tty,
 	if (baud >= 230400) {
 		set_higher_rates(mos7720_port, baud);
 		/* Enable Interrupts */
-		write_mos_reg(serial, port_number, IER, 0x0c);
+		write_mos_reg(serial, port_number, MOS7720_IER, 0x0c);
 		return;
 	}
 
@@ -1650,7 +1673,7 @@ static void change_port_settings(struct tty_struct *tty,
 	if (cflag & CBAUD)
 		tty_encode_baud_rate(tty, baud, baud);
 	/* Enable Interrupts */
-	write_mos_reg(serial, port_number, IER, 0x0c);
+	write_mos_reg(serial, port_number, MOS7720_IER, 0x0c);
 
 	if (port->read_urb->status != -EINPROGRESS) {
 		status = usb_submit_urb(port->read_urb, GFP_KERNEL);
@@ -1725,7 +1748,7 @@ static int get_lsr_info(struct tty_struct *tty,
 
 	count = mos7720_chars_in_buffer(tty);
 	if (count == 0) {
-		read_mos_reg(port->serial, port_number, LSR, &data);
+		read_mos_reg(port->serial, port_number, MOS7720_LSR, &data);
 		if ((data & (UART_LSR_TEMT | UART_LSR_THRE))
 					== (UART_LSR_TEMT | UART_LSR_THRE)) {
 			dev_dbg(&port->dev, "%s -- Empty\n", __func__);
@@ -1782,7 +1805,7 @@ static int mos7720_tiocmset(struct tty_struct *tty,
 		mcr &= ~UART_MCR_LOOP;
 
 	mos7720_port->shadowMCR = mcr;
-	write_mos_reg(port->serial, port->port_number, MCR,
+	write_mos_reg(port->serial, port->port_number, MOS7720_MCR,
 		      mos7720_port->shadowMCR);
 
 	return 0;
@@ -1827,7 +1850,7 @@ static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
 	}
 
 	mos7720_port->shadowMCR = mcr;
-	write_mos_reg(port->serial, port->port_number, MCR,
+	write_mos_reg(port->serial, port->port_number, MOS7720_MCR,
 		      mos7720_port->shadowMCR);
 
 	return 0;
@@ -1942,7 +1965,7 @@ static int mos7720_startup(struct usb_serial *serial)
 	}
 #endif
 	/* LSR For Port 1 */
-	read_mos_reg(serial, 0, LSR, &data);
+	read_mos_reg(serial, 0, MOS7720_LSR, &data);
 	dev_dbg(&dev->dev, "LSR:%x\n", data);
 
 	return 0;
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index f0c0c53359ad..19b85ee98a72 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1765,6 +1765,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x00, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */
+	{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) },                /* OLICARD300 - MT6225 */
 	{ USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) },
 	{ USB_DEVICE(VIATELECOM_VENDOR_ID, VIATELECOM_PRODUCT_CDS7) },
 	{ } /* Terminating entry */
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 529066bbc7e8..46f1f13b41f1 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1306,6 +1306,7 @@ static void __exit usb_serial_exit(void)
 	tty_unregister_driver(usb_serial_tty_driver);
 	put_tty_driver(usb_serial_tty_driver);
 	bus_unregister(&usb_serial_bus_type);
+	idr_destroy(&serial_minors);
 }
 
 
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index caf188800c67..6b2479123de7 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -2065,6 +2065,18 @@ UNUSUAL_DEV( 0x1908, 0x3335, 0x0200, 0x0200,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_READ_DISC_INFO ),
 
+/* Reported by Oliver Neukum <oneukum@suse.com>
+ * This device morphes spontaneously into another device if the access
+ * pattern of Windows isn't followed. Thus writable media would be dirty
+ * if the initial instance is used. So the device is limited to its
+ * virtual CD.
+ * And yes, the concept that BCD goes up to 9 is not heeded */
+UNUSUAL_DEV( 0x19d2, 0x1225, 0x0000, 0xffff,
+		"ZTE,Incorporated",
+		"ZTE WCDMA Technologies MSM",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_SINGLE_LUN ),
+
 /* Reported by Sven Geggus <sven-usbst@geggus.net>
  * This encrypted pen drive returns bogus data for the initial READ(10).
  */
@@ -2074,6 +2086,17 @@ UNUSUAL_DEV(  0x1b1c, 0x1ab5, 0x0200, 0x0200,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_INITIAL_READ10 ),
 
+/* Reported by Hans de Goede <hdegoede@redhat.com>
+ * These are mini projectors using USB for both power and video data transport
+ * The usb-storage interface is a virtual windows driver CD, which the gm12u320
+ * driver automatically converts into framebuffer & kms dri device nodes.
+ */
+UNUSUAL_DEV( 0x1de1, 0xc102, 0x0000, 0xffff,
+		"Grain-media Technology Corp.",
+		"USB3.0 Device GM12U320",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_DEVICE ),
+
 /* Patch by Richard Schütz <r.schtz@t-online.de>
  * This external hard drive enclosure uses a JMicron chip which
  * needs the US_FL_IGNORE_RESIDUE flag to work properly. */