diff options
| author | Douglas Anderson <dianders@chromium.org> | 2015-10-22 13:05:03 -0700 |
|---|---|---|
| committer | Felipe Balbi <balbi@ti.com> | 2015-11-17 11:35:38 -0600 |
| commit | 1fb7f12d5bec1b0a699c85d724bd5184a01fa2dd (patch) | |
| tree | ff862dcfe2f66e6b4cbab0ae0f67a2a3f0343a38 /drivers/usb | |
| parent | f16593034a30bcbef8f63c37d0f2b9e1a0902c2d (diff) | |
| download | blackbird-op-linux-1fb7f12d5bec1b0a699c85d724bd5184a01fa2dd.tar.gz blackbird-op-linux-1fb7f12d5bec1b0a699c85d724bd5184a01fa2dd.zip | |
usb: dwc2: host: Fix remote wakeup when not in DWC2_L2
In commit 734643dfbdde ("usb: dwc2: host: add flag to reflect bus
state") we changed dwc2_port_suspend() not to set the lx_state
anymore (instead it sets the new bus_suspended variable). This
introduced a bug where we would fail to detect device insertions if:
1. Plug empty hub into dwc2
2. Plug USB flash drive into the empty hub.
3. Wait a few seconds
4. Unplug USB flash drive
5. Less than 2 seconds after step 4, plug the USB flash drive in again.
The dwc2_hcd_rem_wakeup() function should have been changed to look at
the new bus_suspended variable.
Let's fix it. Since commit b46146d59fda ("usb: dwc2: host: resume root
hub on remote wakeup") talks about needing the root hub resumed if the
bus was suspended, we'll include it in our test.
It appears that the "port_l1_change" should only be set to 1 if we were
in DWC2_L1 (the driver currently never sets this), so we'll update the
former "else" case based on this test.
Fixes: 734643dfbdde ("usb: dwc2: host: add flag to reflect bus state")
Acked-by: John Youn <johnyoun@synopsys.com>
Tested-by: Gregory Herrero <gregory.herrero@intel.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Diffstat (limited to 'drivers/usb')
| -rw-r--r-- | drivers/usb/dwc2/hcd.c | 9 |
1 files changed, 5 insertions, 4 deletions
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index e79baf73c234..571c21727ff9 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -324,12 +324,13 @@ void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg) */ static void dwc2_hcd_rem_wakeup(struct dwc2_hsotg *hsotg) { - if (hsotg->lx_state == DWC2_L2) { + if (hsotg->bus_suspended) { hsotg->flags.b.port_suspend_change = 1; usb_hcd_resume_root_hub(hsotg->priv); - } else { - hsotg->flags.b.port_l1_change = 1; } + + if (hsotg->lx_state == DWC2_L1) + hsotg->flags.b.port_l1_change = 1; } /** @@ -1428,8 +1429,8 @@ static void dwc2_wakeup_detected(unsigned long data) dev_dbg(hsotg->dev, "Clear Resume: HPRT0=%0x\n", dwc2_readl(hsotg->regs + HPRT0)); - hsotg->bus_suspended = 0; dwc2_hcd_rem_wakeup(hsotg); + hsotg->bus_suspended = 0; /* Change to L0 state */ hsotg->lx_state = DWC2_L0; |
