Merge tag 'imx-soc-3.15' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc

i.MX SoC changes for 3.15 from Shawn Guo:
 - Support suspend from ocram (DDR IO floating) for imx6 platforms
 - Add cpuidle support for imx6sl
 - Sparse warning fixes for imx6sl and vf610 clock code
 - Remove PWM platform code
 - Support ptp and rmii clock from pad
 - Support WEIM CS GPR configuration
 - Random cleanups and defconfig updates

* tag 'imx-soc-3.15' of git://git.linaro.org/people/shawnguo/linux-2.6: (373 commits)
  ARM: imx6: drop .text.head section annotation from headsmp.S
  ARM: imx6: build suspend-imx6.o with CONFIG_SOC_IMX6
  ARM: imx6: rename pm-imx6q.c to pm-imx6.c
  ARM: imx6: introduce CONFIG_SOC_IMX6 for i.MX6 common stuff
  ARM: imx6: do not call imx6q_suspend_init() with !CONFIG_SUSPEND
  ARM: imx6: call suspend_set_ops() from suspend routine
  ARM: imx6: build headsmp.o only on CONFIG_SMP
  ARM: imx6: move v7_cpu_resume() into suspend-imx6.S
  ARM i.MX6q: Mark VPU and IPU AXI transfers as cacheable, increase IPU priority
  ARM: imx6q: Add GPR6 and GPR7 register definitions for iomuxc gpr
  bus: imx-weim: support CS GPR configuration
  ARM: mach-imx: Kconfig: Remove IMX_HAVE_PLATFORM_IMX2_WDT from SOC_IMX53
  ARM: imx_v6_v7_defconfig: Select CONFIG_DEBUG_FS
  ARM: mach-imx: Select CONFIG_SRAM at ARCH_MXC level
  ARM: imx: add speed grading check for i.mx6 soc
  ARM: imx: avoid calling clk APIs in idle thread which may cause schedule
  ARM: imx6q: support ptp and rmii clock from pad
  ARM: imx6q: remove unneeded clk lookups
  ARM: imx_v6_v7_defconfig: Select CONFIG_MMC_UNSAFE_RESUME
  ARM: imx_v4_v5_defconfig: Select CONFIG_MMC_UNSAFE_RESUME
  ...

1 files changed, 19 insertions, 7 deletions

diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index eb634433ef09..e2d2d8c9891b 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -135,7 +135,8 @@ void musb_port_suspend(struct musb *musb, bool do_suspend)
 
 		/* later, GetPortStatus will stop RESUME signaling */
 		musb->port1_status |= MUSB_PORT_STAT_RESUME;
-		schedule_delayed_work(&musb->finish_resume_work, 20);
+		schedule_delayed_work(&musb->finish_resume_work,
+				      msecs_to_jiffies(20));
 	}
 }
 
@@ -158,7 +159,6 @@ void musb_port_reset(struct musb *musb, bool do_reset)
 	 */
 	power = musb_readb(mbase, MUSB_POWER);
 	if (do_reset) {
-
 		/*
 		 * If RESUME is set, we must make sure it stays minimum 20 ms.
 		 * Then we must clear RESUME and wait a bit to let musb start
@@ -167,11 +167,22 @@ void musb_port_reset(struct musb *musb, bool do_reset)
 		 * detected".
 		 */
 		if (power &  MUSB_POWER_RESUME) {
-			while (time_before(jiffies, musb->rh_timer))
-				msleep(1);
+			long remain = (unsigned long) musb->rh_timer - jiffies;
+
+			if (musb->rh_timer > 0 && remain > 0) {
+				/* take into account the minimum delay after resume */
+				schedule_delayed_work(
+					&musb->deassert_reset_work, remain);
+				return;
+			}
+
 			musb_writeb(mbase, MUSB_POWER,
-				power & ~MUSB_POWER_RESUME);
-			msleep(1);
+				    power & ~MUSB_POWER_RESUME);
+
+			/* Give the core 1 ms to clear MUSB_POWER_RESUME */
+			schedule_delayed_work(&musb->deassert_reset_work,
+					      msecs_to_jiffies(1));
+			return;
 		}
 
 		power &= 0xf0;
@@ -180,7 +191,8 @@ void musb_port_reset(struct musb *musb, bool do_reset)
 
 		musb->port1_status |= USB_PORT_STAT_RESET;
 		musb->port1_status &= ~USB_PORT_STAT_ENABLE;
-		schedule_delayed_work(&musb->deassert_reset_work, 50);
+		schedule_delayed_work(&musb->deassert_reset_work,
+				      msecs_to_jiffies(50));
 	} else {
 		dev_dbg(musb->controller, "root port reset stopped\n");
 		musb_writeb(mbase, MUSB_POWER,