summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host
diff options
context:
space:
mode:
authorDave Airlie <airlied@redhat.com>2013-01-21 07:44:58 +1000
committerDave Airlie <airlied@redhat.com>2013-01-21 07:44:58 +1000
commit735dc0d1e29329ff34ec97f66e130cce481c9607 (patch)
treecf946856ff1defac833e601a3e4a4d8e841ee73e /drivers/usb/host
parentbac4b7c3b5c0660c08dc4949fe40e08e20364ee3 (diff)
parent20c60c35de3285222b3476c3445c66bedf0c449c (diff)
downloadblackbird-op-linux-735dc0d1e29329ff34ec97f66e130cce481c9607.tar.gz
blackbird-op-linux-735dc0d1e29329ff34ec97f66e130cce481c9607.zip
Merge branch 'drm-kms-locking' of git://people.freedesktop.org/~danvet/drm-intel into drm-next
The aim of this locking rework is that ioctls which a compositor should be might call for every frame (set_cursor, page_flip, addfb, rmfb and getfb/create_handle) should not be able to block on kms background activities like output detection. And since each EDID read takes about 25ms (in the best case), that always means we'll drop at least one frame. The solution is to add per-crtc locking for these ioctls, and restrict background activities to only use the global lock. Change-the-world type of events (modeset, dpms, ...) need to grab all locks. Two tricky parts arose in the conversion: - A lot of current code assumes that a kms fb object can't disappear while holding the global lock, since the current code serializes fb destruction with it. Hence proper lifetime management using the already created refcounting for fbs need to be instantiated for all ioctls and interfaces/users. - The rmfb ioctl removes the to-be-deleted fb from all active users. But unconditionally taking the global kms lock to do so introduces an unacceptable potential stall point. And obviously changing the userspace abi isn't on the table, either. Hence this conversion opportunistically checks whether the rmfb ioctl holds the very last reference, which guarantees that the fb isn't in active use on any crtc or plane (thanks to the conversion to the new lifetime rules using proper refcounting). Only if this is not the case will the code go through the slowpath and grab all modeset locks. Sane compositors will never hit this path and so avoid the stall, but userspace relying on these semantics will also not break. All these cases are exercised by the newly added subtests for the i-g-t kms_flip, tested on a machine where a full detect cycle takes around 100 ms. It works, and no frames are dropped any more with these patches applied. kms_flip also contains a special case to exercise the above-describe rmfb slowpath. * 'drm-kms-locking' of git://people.freedesktop.org/~danvet/drm-intel: (335 commits) drm/fb_helper: check whether fbcon is bound drm/doc: updates for new framebuffer lifetime rules drm: don't hold crtc mutexes for connector ->detect callbacks drm: only grab the crtc lock for pageflips drm: optimize drm_framebuffer_remove drm/vmwgfx: add proper framebuffer refcounting drm/i915: dump refcount into framebuffer debugfs file drm: refcounting for crtc framebuffers drm: refcounting for sprite framebuffers drm: fb refcounting for dirtyfb_ioctl drm: don't take modeset locks in getfb ioctl drm: push modeset_lock_all into ->fb_create driver callbacks drm: nest modeset locks within fpriv->fbs_lock drm: reference framebuffers which are on the idr drm: revamp framebuffer cleanup interfaces drm: create drm_framebuffer_lookup drm: revamp locking around fb creation/destruction drm: only take the crtc lock for ->cursor_move drm: only take the crtc lock for ->cursor_set drm: add per-crtc locks ...
Diffstat (limited to 'drivers/usb/host')
-rw-r--r--drivers/usb/host/ehci-fsl.c9
-rw-r--r--drivers/usb/host/ehci-mv.c4
-rw-r--r--drivers/usb/host/ehci-pci.c39
-rw-r--r--drivers/usb/host/fsl-mph-dr-of.c3
-rw-r--r--drivers/usb/host/imx21-hcd.c1
-rw-r--r--drivers/usb/host/ohci-tmio.c3
-rw-r--r--drivers/usb/host/xhci-hub.c38
-rw-r--r--drivers/usb/host/xhci-mem.c2
-rw-r--r--drivers/usb/host/xhci-ring.c9
-rw-r--r--drivers/usb/host/xhci.c10
10 files changed, 90 insertions, 28 deletions
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index fd9b5424b860..d81d2fcbff18 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -230,7 +230,7 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
switch (phy_mode) {
case FSL_USB2_PHY_ULPI:
- if (pdata->controller_ver) {
+ if (pdata->have_sysif_regs && pdata->controller_ver) {
/* controller version 1.6 or above */
setbits32(non_ehci + FSL_SOC_USB_CTRL,
ULPI_PHY_CLK_SEL);
@@ -251,7 +251,7 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
portsc |= PORT_PTS_PTW;
/* fall through */
case FSL_USB2_PHY_UTMI:
- if (pdata->controller_ver) {
+ if (pdata->have_sysif_regs && pdata->controller_ver) {
/* controller version 1.6 or above */
setbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN);
mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI PHY CLK to
@@ -267,7 +267,8 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
break;
}
- if (pdata->controller_ver && (phy_mode == FSL_USB2_PHY_ULPI)) {
+ if (pdata->have_sysif_regs && pdata->controller_ver &&
+ (phy_mode == FSL_USB2_PHY_ULPI)) {
/* check PHY_CLK_VALID to get phy clk valid */
if (!spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) &
PHY_CLK_VALID, FSL_USB_PHY_CLK_TIMEOUT, 0)) {
@@ -278,7 +279,7 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
- if (phy_mode != FSL_USB2_PHY_ULPI)
+ if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs)
setbits32(non_ehci + FSL_SOC_USB_CTRL, USB_CTRL_USB_EN);
return 0;
diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index f7bfc0b898b9..6c56297ea16b 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -43,7 +43,7 @@ static void ehci_clock_enable(struct ehci_hcd_mv *ehci_mv)
unsigned int i;
for (i = 0; i < ehci_mv->clknum; i++)
- clk_enable(ehci_mv->clk[i]);
+ clk_prepare_enable(ehci_mv->clk[i]);
}
static void ehci_clock_disable(struct ehci_hcd_mv *ehci_mv)
@@ -51,7 +51,7 @@ static void ehci_clock_disable(struct ehci_hcd_mv *ehci_mv)
unsigned int i;
for (i = 0; i < ehci_mv->clknum; i++)
- clk_disable(ehci_mv->clk[i]);
+ clk_disable_unprepare(ehci_mv->clk[i]);
}
static int mv_ehci_enable(struct ehci_hcd_mv *ehci_mv)
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index dabb20494826..170b9399e09f 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -200,6 +200,26 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
break;
}
+ /* optional debug port, normally in the first BAR */
+ temp = pci_find_capability(pdev, PCI_CAP_ID_DBG);
+ if (temp) {
+ pci_read_config_dword(pdev, temp, &temp);
+ temp >>= 16;
+ if (((temp >> 13) & 7) == 1) {
+ u32 hcs_params = ehci_readl(ehci,
+ &ehci->caps->hcs_params);
+
+ temp &= 0x1fff;
+ ehci->debug = hcd->regs + temp;
+ temp = ehci_readl(ehci, &ehci->debug->control);
+ ehci_info(ehci, "debug port %d%s\n",
+ HCS_DEBUG_PORT(hcs_params),
+ (temp & DBGP_ENABLED) ? " IN USE" : "");
+ if (!(temp & DBGP_ENABLED))
+ ehci->debug = NULL;
+ }
+ }
+
retval = ehci_setup(hcd);
if (retval)
return retval;
@@ -228,25 +248,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
break;
}
- /* optional debug port, normally in the first BAR */
- temp = pci_find_capability(pdev, 0x0a);
- if (temp) {
- pci_read_config_dword(pdev, temp, &temp);
- temp >>= 16;
- if ((temp & (3 << 13)) == (1 << 13)) {
- temp &= 0x1fff;
- ehci->debug = hcd->regs + temp;
- temp = ehci_readl(ehci, &ehci->debug->control);
- ehci_info(ehci, "debug port %d%s\n",
- HCS_DEBUG_PORT(ehci->hcs_params),
- (temp & DBGP_ENABLED)
- ? " IN USE"
- : "");
- if (!(temp & DBGP_ENABLED))
- ehci->debug = NULL;
- }
- }
-
/* at least the Genesys GL880S needs fixup here */
temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params);
temp &= 0x0f;
diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c
index 5105127c1d4b..11e0b79ff9d5 100644
--- a/drivers/usb/host/fsl-mph-dr-of.c
+++ b/drivers/usb/host/fsl-mph-dr-of.c
@@ -142,6 +142,9 @@ static int usb_get_ver_info(struct device_node *np)
return ver;
}
+ if (of_device_is_compatible(np, "fsl,mpc5121-usb2-dr"))
+ return FSL_USB_VER_OLD;
+
if (of_device_is_compatible(np, "fsl-usb2-mph")) {
if (of_device_is_compatible(np, "fsl-usb2-mph-v1.6"))
ver = FSL_USB_VER_1_6;
diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c
index bd6a7447ccc9..f0ebe8e7c58b 100644
--- a/drivers/usb/host/imx21-hcd.c
+++ b/drivers/usb/host/imx21-hcd.c
@@ -58,6 +58,7 @@
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include <linux/dma-mapping.h>
+#include <linux/module.h>
#include "imx21-hcd.h"
diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c
index d370245a4ee2..5e3a6deb62b1 100644
--- a/drivers/usb/host/ohci-tmio.c
+++ b/drivers/usb/host/ohci-tmio.c
@@ -128,7 +128,8 @@ static void tmio_start_hc(struct platform_device *dev)
tmio_iowrite8(2, tmio->ccr + CCR_INTC);
dev_info(&dev->dev, "revision %d @ 0x%08llx, irq %d\n",
- tmio_ioread8(tmio->ccr + CCR_REVID), hcd->rsrc_start, hcd->irq);
+ tmio_ioread8(tmio->ccr + CCR_REVID),
+ (u64) hcd->rsrc_start, hcd->irq);
}
static int ohci_tmio_start(struct usb_hcd *hcd)
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index a686cf4905bb..68914429482f 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -761,12 +761,39 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
break;
case USB_PORT_FEAT_LINK_STATE:
temp = xhci_readl(xhci, port_array[wIndex]);
+
+ /* Disable port */
+ if (link_state == USB_SS_PORT_LS_SS_DISABLED) {
+ xhci_dbg(xhci, "Disable port %d\n", wIndex);
+ temp = xhci_port_state_to_neutral(temp);
+ /*
+ * Clear all change bits, so that we get a new
+ * connection event.
+ */
+ temp |= PORT_CSC | PORT_PEC | PORT_WRC |
+ PORT_OCC | PORT_RC | PORT_PLC |
+ PORT_CEC;
+ xhci_writel(xhci, temp | PORT_PE,
+ port_array[wIndex]);
+ temp = xhci_readl(xhci, port_array[wIndex]);
+ break;
+ }
+
+ /* Put link in RxDetect (enable port) */
+ if (link_state == USB_SS_PORT_LS_RX_DETECT) {
+ xhci_dbg(xhci, "Enable port %d\n", wIndex);
+ xhci_set_link_state(xhci, port_array, wIndex,
+ link_state);
+ temp = xhci_readl(xhci, port_array[wIndex]);
+ break;
+ }
+
/* Software should not attempt to set
- * port link state above '5' (Rx.Detect) and the port
+ * port link state above '3' (U3) and the port
* must be enabled.
*/
if ((temp & PORT_PE) == 0 ||
- (link_state > USB_SS_PORT_LS_RX_DETECT)) {
+ (link_state > USB_SS_PORT_LS_U3)) {
xhci_warn(xhci, "Cannot set link state.\n");
goto error;
}
@@ -957,6 +984,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
int max_ports;
__le32 __iomem **port_array;
struct xhci_bus_state *bus_state;
+ bool reset_change = false;
max_ports = xhci_get_ports(hcd, &port_array);
bus_state = &xhci->bus_state[hcd_index(hcd)];
@@ -988,6 +1016,12 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
buf[(i + 1) / 8] |= 1 << (i + 1) % 8;
status = 1;
}
+ if ((temp & PORT_RC))
+ reset_change = true;
+ }
+ if (!status && !reset_change) {
+ xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
+ clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
}
spin_unlock_irqrestore(&xhci->lock, flags);
return status ? retval : 0;
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index fb51c7085ad0..35616ffbe3ae 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1250,6 +1250,8 @@ static unsigned int xhci_microframes_to_exponent(struct usb_device *udev,
static unsigned int xhci_parse_microframe_interval(struct usb_device *udev,
struct usb_host_endpoint *ep)
{
+ if (ep->desc.bInterval == 0)
+ return 0;
return xhci_microframes_to_exponent(udev, ep,
ep->desc.bInterval, 0, 15);
}
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index cbb44b7b9d65..59fb5c677dbe 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1725,6 +1725,15 @@ cleanup:
if (bogus_port_status)
return;
+ /*
+ * xHCI port-status-change events occur when the "or" of all the
+ * status-change bits in the portsc register changes from 0 to 1.
+ * New status changes won't cause an event if any other change
+ * bits are still set. When an event occurs, switch over to
+ * polling to avoid losing status changes.
+ */
+ xhci_dbg(xhci, "%s: starting port polling.\n", __func__);
+ set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
spin_unlock(&xhci->lock);
/* Pass this up to the core */
usb_hcd_poll_rh_status(hcd);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 5c72c431bab1..f1f01a834ba7 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -884,6 +884,11 @@ int xhci_suspend(struct xhci_hcd *xhci)
xhci->shared_hcd->state != HC_STATE_SUSPENDED)
return -EINVAL;
+ /* Don't poll the roothubs on bus suspend. */
+ xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
+ clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+ del_timer_sync(&hcd->rh_timer);
+
spin_lock_irq(&xhci->lock);
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
@@ -1069,6 +1074,11 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
compliance_mode_recovery_timer_init(xhci);
+ /* Re-enable port polling. */
+ xhci_dbg(xhci, "%s: starting port polling.\n", __func__);
+ set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+ usb_hcd_poll_rh_status(hcd);
+
return retval;
}
#endif /* CONFIG_PM */
OpenPOWER on IntegriCloud