summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/xhci-ring.c
diff options
context:
space:
mode:
authorLu Baolu <baolu.lu@linux.intel.com>2015-08-06 19:24:00 +0300
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2015-08-08 15:16:00 -0700
commit79b8094f60d8ce54ee76e631ab665c5e3012e6ba (patch)
treeada7b0d94b79af3555e5c6875f4dfe620a4b09bc /drivers/usb/host/xhci-ring.c
parent4758dcd19a7d9ba9610b38fecb93f65f56f86346 (diff)
downloadblackbird-op-linux-79b8094f60d8ce54ee76e631ab665c5e3012e6ba.tar.gz
blackbird-op-linux-79b8094f60d8ce54ee76e631ab665c5e3012e6ba.zip
xhci: xHCI 1.1: Contiguous Frame ID Capability (CFC)
If the Contiguous Frame ID Capability is supported (CFC = 1), then the xHC shall match the Frame ID in every Isoch TD with SIA = 0 against the Frame Index of the MFINDEX register. This rule ensures resynchronization of Isoch TDs even if some are dropped due to Missed Service Errors or Stopping the endpoint. This patch enables xHCI driver to support CFC by calculating and setting the Frame ID field of an Isoch TRB. [made some dbg messages checkpatch friendly -Mathias] Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/host/xhci-ring.c')
-rw-r--r--drivers/usb/host/xhci-ring.c191
1 files changed, 178 insertions, 13 deletions
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 463562d11929..af8c0f24cf46 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -3555,6 +3555,97 @@ static unsigned int xhci_get_last_burst_packet_count(struct xhci_hcd *xhci,
}
}
+/*
+ * Calculates Frame ID field of the isochronous TRB identifies the
+ * target frame that the Interval associated with this Isochronous
+ * Transfer Descriptor will start on. Refer to 4.11.2.5 in 1.1 spec.
+ *
+ * Returns actual frame id on success, negative value on error.
+ */
+static int xhci_get_isoc_frame_id(struct xhci_hcd *xhci,
+ struct urb *urb, int index)
+{
+ int start_frame, ist, ret = 0;
+ int start_frame_id, end_frame_id, current_frame_id;
+
+ if (urb->dev->speed == USB_SPEED_LOW ||
+ urb->dev->speed == USB_SPEED_FULL)
+ start_frame = urb->start_frame + index * urb->interval;
+ else
+ start_frame = (urb->start_frame + index * urb->interval) >> 3;
+
+ /* Isochronous Scheduling Threshold (IST, bits 0~3 in HCSPARAMS2):
+ *
+ * If bit [3] of IST is cleared to '0', software can add a TRB no
+ * later than IST[2:0] Microframes before that TRB is scheduled to
+ * be executed.
+ * If bit [3] of IST is set to '1', software can add a TRB no later
+ * than IST[2:0] Frames before that TRB is scheduled to be executed.
+ */
+ ist = HCS_IST(xhci->hcs_params2) & 0x7;
+ if (HCS_IST(xhci->hcs_params2) & (1 << 3))
+ ist <<= 3;
+
+ /* Software shall not schedule an Isoch TD with a Frame ID value that
+ * is less than the Start Frame ID or greater than the End Frame ID,
+ * where:
+ *
+ * End Frame ID = (Current MFINDEX register value + 895 ms.) MOD 2048
+ * Start Frame ID = (Current MFINDEX register value + IST + 1) MOD 2048
+ *
+ * Both the End Frame ID and Start Frame ID values are calculated
+ * in microframes. When software determines the valid Frame ID value;
+ * The End Frame ID value should be rounded down to the nearest Frame
+ * boundary, and the Start Frame ID value should be rounded up to the
+ * nearest Frame boundary.
+ */
+ current_frame_id = readl(&xhci->run_regs->microframe_index);
+ start_frame_id = roundup(current_frame_id + ist + 1, 8);
+ end_frame_id = rounddown(current_frame_id + 895 * 8, 8);
+
+ start_frame &= 0x7ff;
+ start_frame_id = (start_frame_id >> 3) & 0x7ff;
+ end_frame_id = (end_frame_id >> 3) & 0x7ff;
+
+ xhci_dbg(xhci, "%s: index %d, reg 0x%x start_frame_id 0x%x, end_frame_id 0x%x, start_frame 0x%x\n",
+ __func__, index, readl(&xhci->run_regs->microframe_index),
+ start_frame_id, end_frame_id, start_frame);
+
+ if (start_frame_id < end_frame_id) {
+ if (start_frame > end_frame_id ||
+ start_frame < start_frame_id)
+ ret = -EINVAL;
+ } else if (start_frame_id > end_frame_id) {
+ if ((start_frame > end_frame_id &&
+ start_frame < start_frame_id))
+ ret = -EINVAL;
+ } else {
+ ret = -EINVAL;
+ }
+
+ if (index == 0) {
+ if (ret == -EINVAL || start_frame == start_frame_id) {
+ start_frame = start_frame_id + 1;
+ if (urb->dev->speed == USB_SPEED_LOW ||
+ urb->dev->speed == USB_SPEED_FULL)
+ urb->start_frame = start_frame;
+ else
+ urb->start_frame = start_frame << 3;
+ ret = 0;
+ }
+ }
+
+ if (ret) {
+ xhci_warn(xhci, "Frame ID %d (reg %d, index %d) beyond range (%d, %d)\n",
+ start_frame, current_frame_id, index,
+ start_frame_id, end_frame_id);
+ xhci_warn(xhci, "Ignore frame ID field, use SIA bit instead\n");
+ return ret;
+ }
+
+ return start_frame;
+}
+
/* This is for isoc transfer */
static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
struct urb *urb, int slot_id, unsigned int ep_index)
@@ -3571,7 +3662,9 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
u64 start_addr, addr;
int i, j;
bool more_trbs_coming;
+ struct xhci_virt_ep *xep;
+ xep = &xhci->devs[slot_id]->eps[ep_index];
ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
num_tds = urb->number_of_packets;
@@ -3619,6 +3712,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
td = urb_priv->td[i];
for (j = 0; j < trbs_per_td; j++) {
+ int frame_id = 0;
u32 remainder = 0;
field = 0;
@@ -3627,8 +3721,20 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
TRB_TLBPC(residue);
/* Queue the isoc TRB */
field |= TRB_TYPE(TRB_ISOC);
- /* Assume URB_ISO_ASAP is set */
- field |= TRB_SIA;
+
+ /* Calculate Frame ID and SIA fields */
+ if (!(urb->transfer_flags & URB_ISO_ASAP) &&
+ HCC_CFC(xhci->hcc_params)) {
+ frame_id = xhci_get_isoc_frame_id(xhci,
+ urb,
+ i);
+ if (frame_id >= 0)
+ field |= TRB_FRAME_ID(frame_id);
+ else
+ field |= TRB_SIA;
+ } else
+ field |= TRB_SIA;
+
if (i == 0) {
if (start_cycle == 0)
field |= 0x1;
@@ -3704,6 +3810,10 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
}
}
+ /* store the next frame id */
+ if (HCC_CFC(xhci->hcc_params))
+ xep->next_frame_id = urb->start_frame + num_tds * urb->interval;
+
if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs == 0) {
if (xhci->quirks & XHCI_AMD_PLL_FIX)
usb_amd_quirk_pll_disable();
@@ -3737,12 +3847,34 @@ cleanup:
return ret;
}
+static int ep_ring_is_processing(struct xhci_hcd *xhci,
+ int slot_id, unsigned int ep_index)
+{
+ struct xhci_virt_device *xdev;
+ struct xhci_ring *ep_ring;
+ struct xhci_ep_ctx *ep_ctx;
+ struct xhci_virt_ep *xep;
+ dma_addr_t hw_deq;
+
+ xdev = xhci->devs[slot_id];
+ xep = &xhci->devs[slot_id]->eps[ep_index];
+ ep_ring = xep->ring;
+ ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
+
+ if ((le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK) != EP_STATE_RUNNING)
+ return 0;
+
+ hw_deq = le64_to_cpu(ep_ctx->deq) & ~EP_CTX_CYCLE_MASK;
+ return (hw_deq !=
+ xhci_trb_virt_to_dma(ep_ring->enq_seg, ep_ring->enqueue));
+}
+
/*
* Check transfer ring to guarantee there is enough room for the urb.
* Update ISO URB start_frame and interval.
- * Update interval as xhci_queue_intr_tx does. Just use xhci frame_index to
- * update the urb->start_frame by now.
- * Always assume URB_ISO_ASAP set, and NEVER use urb->start_frame as input.
+ * Update interval as xhci_queue_intr_tx does. Use xhci frame_index to
+ * update urb->start_frame if URB_ISO_ASAP is set in transfer_flags or
+ * Contiguous Frame ID is not supported by HC.
*/
int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
struct urb *urb, int slot_id, unsigned int ep_index)
@@ -3755,8 +3887,11 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
int ep_interval;
int num_tds, num_trbs, i;
int ret;
+ struct xhci_virt_ep *xep;
+ int ist;
xdev = xhci->devs[slot_id];
+ xep = &xhci->devs[slot_id]->eps[ep_index];
ep_ring = xdev->eps[ep_index].ring;
ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
@@ -3773,14 +3908,10 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
if (ret)
return ret;
- start_frame = readl(&xhci->run_regs->microframe_index);
- start_frame &= 0x3fff;
-
- urb->start_frame = start_frame;
- if (urb->dev->speed == USB_SPEED_LOW ||
- urb->dev->speed == USB_SPEED_FULL)
- urb->start_frame >>= 3;
-
+ /*
+ * Check interval value. This should be done before we start to
+ * calculate the start frame value.
+ */
xhci_interval = EP_INTERVAL_TO_UFRAMES(le32_to_cpu(ep_ctx->ep_info));
ep_interval = urb->interval;
/* Convert to microframes */
@@ -3801,6 +3932,40 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
urb->dev->speed == USB_SPEED_FULL)
urb->interval /= 8;
}
+
+ /* Calculate the start frame and put it in urb->start_frame. */
+ if (HCC_CFC(xhci->hcc_params) &&
+ ep_ring_is_processing(xhci, slot_id, ep_index)) {
+ urb->start_frame = xep->next_frame_id;
+ goto skip_start_over;
+ }
+
+ start_frame = readl(&xhci->run_regs->microframe_index);
+ start_frame &= 0x3fff;
+ /*
+ * Round up to the next frame and consider the time before trb really
+ * gets scheduled by hardare.
+ */
+ ist = HCS_IST(xhci->hcs_params2) & 0x7;
+ if (HCS_IST(xhci->hcs_params2) & (1 << 3))
+ ist <<= 3;
+ start_frame += ist + XHCI_CFC_DELAY;
+ start_frame = roundup(start_frame, 8);
+
+ /*
+ * Round up to the next ESIT (Endpoint Service Interval Time) if ESIT
+ * is greate than 8 microframes.
+ */
+ if (urb->dev->speed == USB_SPEED_LOW ||
+ urb->dev->speed == USB_SPEED_FULL) {
+ start_frame = roundup(start_frame, urb->interval << 3);
+ urb->start_frame = start_frame >> 3;
+ } else {
+ start_frame = roundup(start_frame, urb->interval);
+ urb->start_frame = start_frame;
+ }
+
+skip_start_over:
ep_ring->num_trbs_free_temp = ep_ring->num_trbs_free;
return xhci_queue_isoc_tx(xhci, mem_flags, urb, slot_id, ep_index);
OpenPOWER on IntegriCloud