diff options
| author | Russ Dill <Russ.Dill@ti.com> | 2012-05-04 04:24:47 -0700 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2012-05-04 17:05:45 -0700 |
| commit | 3aa2ae74ba630ec9b98736d64aea8e4cb490861d (patch) | |
| tree | 6c7555c75054c67fb8c9741898d012fc6dbab0fa /drivers/usb/host/ehci-omap.c | |
| parent | 3cccc292524dfd5d77f38f52116b1da4864e3789 (diff) | |
| download | blackbird-op-linux-3aa2ae74ba630ec9b98736d64aea8e4cb490861d.tar.gz blackbird-op-linux-3aa2ae74ba630ec9b98736d64aea8e4cb490861d.zip | |
USB: EHCI: OMAP: Finish ehci omap phy reset cycle before adding hcd.
'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' (1fcb57d0f) created a regression
with Beagleboard xM if booting the kernel after running 'usb start' under u-boot.
Finishing the reset before calling 'usb_add_hcd' fixes the regression. This is most likely due to
usb_add_hcd calling the driver's reset and init functions which expect the hardware to be
up and running.
Signed-off-by: Russ Dill <Russ.Dill@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Cc: stable <stable@vger.kernel.org> [3.4]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/host/ehci-omap.c')
| -rw-r--r-- | drivers/usb/host/ehci-omap.c | 18 |
1 files changed, 9 insertions, 9 deletions
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 5c78f9e71466..e669c6a7e91e 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -242,15 +242,6 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) ehci_reset(omap_ehci); - ret = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (ret) { - dev_err(dev, "failed to add hcd with err %d\n", ret); - goto err_add_hcd; - } - - /* root ports should always stay powered */ - ehci_port_power(omap_ehci, 1); - if (pdata->phy_reset) { /* Hold the PHY in RESET for enough time till * PHY is settled and ready @@ -264,6 +255,15 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) gpio_set_value(pdata->reset_gpio_port[1], 1); } + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (ret) { + dev_err(dev, "failed to add hcd with err %d\n", ret); + goto err_add_hcd; + } + + /* root ports should always stay powered */ + ehci_port_power(omap_ehci, 1); + return 0; err_add_hcd: |
