summaryrefslogtreecommitdiffstats
path: root/drivers/tty
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-05-29 18:27:19 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-05-29 18:27:19 -0700
commit7e5b2db77b05746613516599c916a8cc2e321077 (patch)
treec3ec333ff7b77bcc8e456a3a3d19bf20f5c651b8 /drivers/tty
parent227d1e4319ffd8729781941d92f4ae4d85beecd9 (diff)
parentc819baf31f5f91fbb06b2c93de2d5b8c8d096f3f (diff)
downloadblackbird-op-linux-7e5b2db77b05746613516599c916a8cc2e321077.tar.gz
blackbird-op-linux-7e5b2db77b05746613516599c916a8cc2e321077.zip
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle: "The whole series has been sitting in -next for quite a while with no complaints. The last change to the series was before the weekend the removal of an SPI patch which Grant - even though previously acked by himself - appeared to raise objections. So I removed it until the situation is clarified. Other than that all the patches have the acks from their respective maintainers, all MIPS and x86 defconfigs are building fine and I'm not aware of any problems introduced by this series. Among the key features for this patch series is a sizable patchset for Lantiq which among other things introduces support for Lantiq's flagship product, the FALCON SOC. It also means that the opensource developers behind this patchset have overtaken Lantiq's competing inhouse development team that was working behind closed doors. Less noteworthy the ath79 patchset which adds support for a few more chip variants, cleanups and fixes. Finally the usual dose of tweaking of generic code." Fix up trivial conflicts in arch/mips/lantiq/xway/gpio_{ebu,stp}.c where printk spelling fixes clashed with file move and eventual removal of the printk. * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (81 commits) MIPS: lantiq: remove orphaned code MIPS: Remove all -Wall and almost all -Werror usage from arch/mips. MIPS: lantiq: implement support for FALCON soc MTD: MIPS: lantiq: verify that the NOR interface is available on falcon soc MTD: MIPS: lantiq: implement OF support watchdog: MIPS: lantiq: implement OF support and minor fixes SERIAL: MIPS: lantiq: implement OF support GPIO: MIPS: lantiq: convert gpio-stp-xway to OF GPIO: MIPS: lantiq: convert gpio-mm-lantiq to OF and of_mm_gpio GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder MIPS: pci: convert lantiq driver to OF MIPS: lantiq: convert dma to platform driver MIPS: lantiq: implement support for clkdev api MIPS: lantiq: drop ltq_gpio_request() and gpio_to_irq() OF: MIPS: lantiq: implement irq_domain support OF: MIPS: lantiq: implement OF support MIPS: lantiq: drop mips_machine support OF: PCI: const usage needed by MIPS MIPS: Cavium: Remove smp_reserve_lock. MIPS: Move cache setup to setup_arch(). ...
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/serial/lantiq.c83
-rw-r--r--drivers/tty/serial/sb1250-duart.c1
-rw-r--r--drivers/tty/serial/zs.c1
3 files changed, 53 insertions, 32 deletions
diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
index 96c1cacc7360..02da071fe1e7 100644
--- a/drivers/tty/serial/lantiq.c
+++ b/drivers/tty/serial/lantiq.c
@@ -31,16 +31,19 @@
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
-#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <linux/io.h>
#include <linux/clk.h>
+#include <linux/gpio.h>
#include <lantiq_soc.h>
#define PORT_LTQ_ASC 111
#define MAXPORTS 2
#define UART_DUMMY_UER_RX 1
-#define DRVNAME "ltq_asc"
+#define DRVNAME "lantiq,asc"
#ifdef __BIG_ENDIAN
#define LTQ_ASC_TBUF (0x0020 + 3)
#define LTQ_ASC_RBUF (0x0024 + 3)
@@ -114,6 +117,9 @@ static DEFINE_SPINLOCK(ltq_asc_lock);
struct ltq_uart_port {
struct uart_port port;
+ /* clock used to derive divider */
+ struct clk *fpiclk;
+ /* clock gating of the ASC core */
struct clk *clk;
unsigned int tx_irq;
unsigned int rx_irq;
@@ -316,7 +322,9 @@ lqasc_startup(struct uart_port *port)
struct ltq_uart_port *ltq_port = to_ltq_uart_port(port);
int retval;
- port->uartclk = clk_get_rate(ltq_port->clk);
+ if (ltq_port->clk)
+ clk_enable(ltq_port->clk);
+ port->uartclk = clk_get_rate(ltq_port->fpiclk);
ltq_w32_mask(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET),
port->membase + LTQ_ASC_CLC);
@@ -382,6 +390,8 @@ lqasc_shutdown(struct uart_port *port)
port->membase + LTQ_ASC_RXFCON);
ltq_w32_mask(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU,
port->membase + LTQ_ASC_TXFCON);
+ if (ltq_port->clk)
+ clk_disable(ltq_port->clk);
}
static void
@@ -630,7 +640,7 @@ lqasc_console_setup(struct console *co, char *options)
port = &ltq_port->port;
- port->uartclk = clk_get_rate(ltq_port->clk);
+ port->uartclk = clk_get_rate(ltq_port->fpiclk);
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -668,37 +678,32 @@ static struct uart_driver lqasc_reg = {
static int __init
lqasc_probe(struct platform_device *pdev)
{
+ struct device_node *node = pdev->dev.of_node;
struct ltq_uart_port *ltq_port;
struct uart_port *port;
- struct resource *mmres, *irqres;
- int tx_irq, rx_irq, err_irq;
- struct clk *clk;
+ struct resource *mmres, irqres[3];
+ int line = 0;
int ret;
mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!mmres || !irqres)
+ ret = of_irq_to_resource_table(node, irqres, 3);
+ if (!mmres || (ret != 3)) {
+ dev_err(&pdev->dev,
+ "failed to get memory/irq for serial port\n");
return -ENODEV;
+ }
- if (pdev->id >= MAXPORTS)
- return -EBUSY;
+ /* check if this is the console port */
+ if (mmres->start != CPHYSADDR(LTQ_EARLY_ASC))
+ line = 1;
- if (lqasc_port[pdev->id] != NULL)
+ if (lqasc_port[line]) {
+ dev_err(&pdev->dev, "port %d already allocated\n", line);
return -EBUSY;
-
- clk = clk_get(&pdev->dev, "fpi");
- if (IS_ERR(clk)) {
- pr_err("failed to get fpi clk\n");
- return -ENOENT;
}
- tx_irq = platform_get_irq_byname(pdev, "tx");
- rx_irq = platform_get_irq_byname(pdev, "rx");
- err_irq = platform_get_irq_byname(pdev, "err");
- if ((tx_irq < 0) | (rx_irq < 0) | (err_irq < 0))
- return -ENODEV;
-
- ltq_port = kzalloc(sizeof(struct ltq_uart_port), GFP_KERNEL);
+ ltq_port = devm_kzalloc(&pdev->dev, sizeof(struct ltq_uart_port),
+ GFP_KERNEL);
if (!ltq_port)
return -ENOMEM;
@@ -709,19 +714,26 @@ lqasc_probe(struct platform_device *pdev)
port->ops = &lqasc_pops;
port->fifosize = 16;
port->type = PORT_LTQ_ASC,
- port->line = pdev->id;
+ port->line = line;
port->dev = &pdev->dev;
-
- port->irq = tx_irq; /* unused, just to be backward-compatibe */
+ /* unused, just to be backward-compatible */
+ port->irq = irqres[0].start;
port->mapbase = mmres->start;
- ltq_port->clk = clk;
+ ltq_port->fpiclk = clk_get_fpi();
+ if (IS_ERR(ltq_port->fpiclk)) {
+ pr_err("failed to get fpi clk\n");
+ return -ENOENT;
+ }
- ltq_port->tx_irq = tx_irq;
- ltq_port->rx_irq = rx_irq;
- ltq_port->err_irq = err_irq;
+ /* not all asc ports have clock gates, lets ignore the return code */
+ ltq_port->clk = clk_get(&pdev->dev, NULL);
- lqasc_port[pdev->id] = ltq_port;
+ ltq_port->tx_irq = irqres[0].start;
+ ltq_port->rx_irq = irqres[1].start;
+ ltq_port->err_irq = irqres[2].start;
+
+ lqasc_port[line] = ltq_port;
platform_set_drvdata(pdev, ltq_port);
ret = uart_add_one_port(&lqasc_reg, port);
@@ -729,10 +741,17 @@ lqasc_probe(struct platform_device *pdev)
return ret;
}
+static const struct of_device_id ltq_asc_match[] = {
+ { .compatible = DRVNAME },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ltq_asc_match);
+
static struct platform_driver lqasc_driver = {
.driver = {
.name = DRVNAME,
.owner = THIS_MODULE,
+ .of_match_table = ltq_asc_match,
},
};
diff --git a/drivers/tty/serial/sb1250-duart.c b/drivers/tty/serial/sb1250-duart.c
index 0be8a2f00d0b..f76b1688c5c8 100644
--- a/drivers/tty/serial/sb1250-duart.c
+++ b/drivers/tty/serial/sb1250-duart.c
@@ -31,6 +31,7 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/major.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
diff --git a/drivers/tty/serial/zs.c b/drivers/tty/serial/zs.c
index 4001eee6c08d..92c00b24d0df 100644
--- a/drivers/tty/serial/zs.c
+++ b/drivers/tty/serial/zs.c
@@ -57,6 +57,7 @@
#include <linux/ioport.h>
#include <linux/irqflags.h>
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/major.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
OpenPOWER on IntegriCloud