diff options
| author | Ji-Ze Hong (Peter Hong) <hpeter@gmail.com> | 2016-12-23 09:41:20 +0800 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2017-01-12 11:51:24 +0100 |
| commit | 6def047c29b94cd7de8ffaec567060fb610ef2d2 (patch) | |
| tree | f280c631c50ddf59820d825b2cce83843a66a129 /drivers/tty | |
| parent | 732dbf3a6104a3abfcfcd066dcaf89e5054ce009 (diff) | |
| download | blackbird-op-linux-6def047c29b94cd7de8ffaec567060fb610ef2d2.tar.gz blackbird-op-linux-6def047c29b94cd7de8ffaec567060fb610ef2d2.zip | |
serial: 8250_fintek: Add resource check for Fintek F81504/508/512
Add resource type check for Fintek F81504/508/512, BAR3/4/5 must be
IORESOURCE_IO.
Fintek is trying to make F81504/508/512 works on MMIO interface, but
it's still in progress. We found some issue when the experiment IC
when the BAR3/4/5 is IORESOURCE_MEM. It'll cause wrong operation with
IO resource. So we'll add the resource check for this.
Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty')
| -rw-r--r-- | drivers/tty/serial/8250/8250_pci.c | 13 |
1 files changed, 9 insertions, 4 deletions
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index aa0166b6d450..29198b94ef7a 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1477,11 +1477,16 @@ static int pci_fintek_init(struct pci_dev *dev) { unsigned long iobase; u32 max_port, i; - u32 bar_data[3]; + resource_size_t bar_data[3]; u8 config_base; struct serial_private *priv = pci_get_drvdata(dev); struct uart_8250_port *port; + if (!(pci_resource_flags(dev, 5) & IORESOURCE_IO) || + !(pci_resource_flags(dev, 4) & IORESOURCE_IO) || + !(pci_resource_flags(dev, 3) & IORESOURCE_IO)) + return -ENODEV; + switch (dev->device) { case 0x1104: /* 4 ports */ case 0x1108: /* 8 ports */ @@ -1495,9 +1500,9 @@ static int pci_fintek_init(struct pci_dev *dev) } /* Get the io address dispatch from the BIOS */ - pci_read_config_dword(dev, 0x24, &bar_data[0]); - pci_read_config_dword(dev, 0x20, &bar_data[1]); - pci_read_config_dword(dev, 0x1c, &bar_data[2]); + bar_data[0] = pci_resource_start(dev, 5); + bar_data[1] = pci_resource_start(dev, 4); + bar_data[2] = pci_resource_start(dev, 3); for (i = 0; i < max_port; ++i) { /* UART0 configuration offset start from 0x40 */ |
