tty: xuartps: Fix kernel-doc errors in the driver

No functional changes.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 49 insertions, 60 deletions

diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index f619ad5b5eae..b2f929e48ddd 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -163,11 +163,11 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
 
 /**
  * struct xuartps - device data
- * @port		Pointer to the UART port
- * @refclk		Reference clock
- * @aperclk		APB clock
- * @baud		Current baud rate
- * @clk_rate_change_nb	Notifier block for clock changes
+ * @port:		Pointer to the UART port
+ * @refclk:		Reference clock
+ * @aperclk:		APB clock
+ * @baud:		Current baud rate
+ * @clk_rate_change_nb:	Notifier block for clock changes
  */
 struct xuartps {
 	struct uart_port	*port;
@@ -183,8 +183,8 @@ struct xuartps {
  * @irq: Irq number
  * @dev_id: Id of the port
  *
- * Returns IRQHANDLED
- **/
+ * Return: IRQHANDLED
+ */
 static irqreturn_t xuartps_isr(int irq, void *dev_id)
 {
 	struct uart_port *port = (struct uart_port *)dev_id;
@@ -325,7 +325,7 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
  * @rbdiv: BDIV value (return value)
  * @rcd: CD value (return value)
  * @div8: Value for clk_sel bit in mod (return value)
- * Returns baud rate, requested baud when possible, or actual baud when there
+ * Return: baud rate, requested baud when possible, or actual baud when there
  *	was too much error, zero if no valid divisors are found.
  *
  * Formula to obtain baud rate is
@@ -384,7 +384,7 @@ static unsigned int xuartps_calc_baud_divs(unsigned int clk, unsigned int baud,
  * xuartps_set_baud_rate - Calculate and set the baud rate
  * @port: Handle to the uart port structure
  * @baud: Baud rate to set
- * Returns baud rate, requested baud when possible, or actual baud when there
+ * Return: baud rate, requested baud when possible, or actual baud when there
  *	   was too much error, zero if no valid divisors are found.
  */
 static unsigned int xuartps_set_baud_rate(struct uart_port *port,
@@ -419,7 +419,7 @@ static unsigned int xuartps_set_baud_rate(struct uart_port *port,
  * @nb:		Notifier block
  * @event:	Notify event
  * @data:	Notifier data
- * Returns NOTIFY_OK on success, NOTIFY_BAD on error.
+ * Return: NOTIFY_OK on success, NOTIFY_BAD on error.
  */
 static int xuartps_clk_notifier_cb(struct notifier_block *nb,
 		unsigned long event, void *data)
@@ -514,8 +514,7 @@ static int xuartps_clk_notifier_cb(struct notifier_block *nb,
 /**
  * xuartps_start_tx -  Start transmitting bytes
  * @port: Handle to the uart port structure
- *
- **/
+ */
 static void xuartps_start_tx(struct uart_port *port)
 {
 	unsigned int status, numbytes = port->fifosize;
@@ -562,8 +561,7 @@ static void xuartps_start_tx(struct uart_port *port)
 /**
  * xuartps_stop_tx - Stop TX
  * @port: Handle to the uart port structure
- *
- **/
+ */
 static void xuartps_stop_tx(struct uart_port *port)
 {
 	unsigned int regval;
@@ -577,8 +575,7 @@ static void xuartps_stop_tx(struct uart_port *port)
 /**
  * xuartps_stop_rx - Stop RX
  * @port: Handle to the uart port structure
- *
- **/
+ */
 static void xuartps_stop_rx(struct uart_port *port)
 {
 	unsigned int regval;
@@ -593,8 +590,8 @@ static void xuartps_stop_rx(struct uart_port *port)
  * xuartps_tx_empty -  Check whether TX is empty
  * @port: Handle to the uart port structure
  *
- * Returns TIOCSER_TEMT on success, 0 otherwise
- **/
+ * Return: TIOCSER_TEMT on success, 0 otherwise
+ */
 static unsigned int xuartps_tx_empty(struct uart_port *port)
 {
 	unsigned int status;
@@ -608,8 +605,7 @@ static unsigned int xuartps_tx_empty(struct uart_port *port)
  *			transmitting char breaks
  * @port: Handle to the uart port structure
  * @ctl: Value based on which start or stop decision is taken
- *
- **/
+ */
 static void xuartps_break_ctl(struct uart_port *port, int ctl)
 {
 	unsigned int status;
@@ -636,8 +632,7 @@ static void xuartps_break_ctl(struct uart_port *port, int ctl)
  * @port: Handle to the uart port structure
  * @termios: Handle to the input termios structure
  * @old: Values of the previously saved termios structure
- *
- **/
+ */
 static void xuartps_set_termios(struct uart_port *port,
 				struct ktermios *termios, struct ktermios *old)
 {
@@ -761,8 +756,8 @@ static void xuartps_set_termios(struct uart_port *port,
  * xuartps_startup - Called when an application opens a xuartps port
  * @port: Handle to the uart port structure
  *
- * Returns 0 on success, negative error otherwise
- **/
+ * Return: 0 on success, negative error otherwise
+ */
 static int xuartps_startup(struct uart_port *port)
 {
 	unsigned int retval = 0, status = 0;
@@ -824,8 +819,7 @@ static int xuartps_startup(struct uart_port *port)
 /**
  * xuartps_shutdown - Called when an application closes a xuartps port
  * @port: Handle to the uart port structure
- *
- **/
+ */
 static void xuartps_shutdown(struct uart_port *port)
 {
 	int status;
@@ -844,8 +838,8 @@ static void xuartps_shutdown(struct uart_port *port)
  * xuartps_type - Set UART type to xuartps port
  * @port: Handle to the uart port structure
  *
- * Returns string on success, NULL otherwise
- **/
+ * Return: string on success, NULL otherwise
+ */
 static const char *xuartps_type(struct uart_port *port)
 {
 	return port->type == PORT_XUARTPS ? XUARTPS_NAME : NULL;
@@ -856,8 +850,8 @@ static const char *xuartps_type(struct uart_port *port)
  * @port: Handle to the uart port structure
  * @ser: Handle to the structure whose members are compared
  *
- * Returns 0 if success otherwise -EINVAL
- **/
+ * Return: 0 if success otherwise -EINVAL
+ */
 static int xuartps_verify_port(struct uart_port *port,
 					struct serial_struct *ser)
 {
@@ -880,8 +874,8 @@ static int xuartps_verify_port(struct uart_port *port,
  *				uart_add_one_port()
  * @port: Handle to the uart port structure
  *
- * Returns 0, -ENOMEM if request fails
- **/
+ * Return: 0, -ENOMEM if request fails
+ */
 static int xuartps_request_port(struct uart_port *port)
 {
 	if (!request_mem_region(port->mapbase, XUARTPS_REGISTER_SPACE,
@@ -903,8 +897,7 @@ static int xuartps_request_port(struct uart_port *port)
  *				port, called when the driver removes a xuartps
  *				port via uart_remove_one_port().
  * @port: Handle to the uart port structure
- *
- **/
+ */
 static void xuartps_release_port(struct uart_port *port)
 {
 	release_mem_region(port->mapbase, XUARTPS_REGISTER_SPACE);
@@ -917,8 +910,7 @@ static void xuartps_release_port(struct uart_port *port)
  *				xuartps port
  * @port: Handle to the uart port structure
  * @flags: If any
- *
- **/
+ */
 static void xuartps_config_port(struct uart_port *port, int flags)
 {
 	if (flags & UART_CONFIG_TYPE && xuartps_request_port(port) == 0)
@@ -930,9 +922,8 @@ static void xuartps_config_port(struct uart_port *port, int flags)
  *
  * @port: Handle to the uart port structure
  *
- * Returns the modem control state
- *
- **/
+ * Return: the modem control state
+ */
 static unsigned int xuartps_get_mctrl(struct uart_port *port)
 {
 	return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
@@ -1040,8 +1031,8 @@ static struct uart_port xuartps_port[2];
  * xuartps_get_port - Configure the port from the platform device resource
  *			info
  *
- * Returns a pointer to a uart_port or NULL for failure
- **/
+ * Return: a pointer to a uart_port or NULL for failure
+ */
 static struct uart_port *xuartps_get_port(void)
 {
 	struct uart_port *port;
@@ -1078,8 +1069,7 @@ static struct uart_port *xuartps_get_port(void)
 /**
  * xuartps_console_wait_tx - Wait for the TX to be full
  * @port: Handle to the uart port structure
- *
- **/
+ */
 static void xuartps_console_wait_tx(struct uart_port *port)
 {
 	while ((xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_TXEMPTY)
@@ -1091,8 +1081,7 @@ static void xuartps_console_wait_tx(struct uart_port *port)
  * xuartps_console_putchar - write the character to the FIFO buffer
  * @port: Handle to the uart port structure
  * @ch: Character to be written
- *
- **/
+ */
 static void xuartps_console_putchar(struct uart_port *port, int ch)
 {
 	xuartps_console_wait_tx(port);
@@ -1101,10 +1090,10 @@ static void xuartps_console_putchar(struct uart_port *port, int ch)
 
 /**
  * xuartps_console_write - perform write operation
- * @port: Handle to the uart port structure
+ * @co: Console handle
  * @s: Pointer to character array
  * @count: No of characters
- **/
+ */
 static void xuartps_console_write(struct console *co, const char *s,
 				unsigned int count)
 {
@@ -1151,8 +1140,8 @@ static void xuartps_console_write(struct console *co, const char *s,
  * @co: Console handle
  * @options: Initial settings of uart
  *
- * Returns 0, -ENODEV if no device
- **/
+ * Return: 0, -ENODEV if no device
+ */
 static int __init xuartps_console_setup(struct console *co, char *options)
 {
 	struct uart_port *port = &xuartps_port[co->index];
@@ -1190,8 +1179,8 @@ static struct console xuartps_console = {
 /**
  * xuartps_console_init - Initialization call
  *
- * Returns 0 on success, negative error otherwise
- **/
+ * Return: 0 on success, negative error otherwise
+ */
 static int __init xuartps_console_init(void)
 {
 	register_console(&xuartps_console);
@@ -1221,7 +1210,7 @@ static struct uart_driver xuartps_uart_driver = {
  * xuartps_suspend - suspend event
  * @device: Pointer to the device structure
  *
- * Returns 0
+ * Return: 0
  */
 static int xuartps_suspend(struct device *device)
 {
@@ -1269,7 +1258,7 @@ static int xuartps_suspend(struct device *device)
  * xuartps_resume - Resume after a previous suspend
  * @device: Pointer to the device structure
  *
- * Returns 0
+ * Return: 0
  */
 static int xuartps_resume(struct device *device)
 {
@@ -1336,8 +1325,8 @@ static SIMPLE_DEV_PM_OPS(xuartps_dev_pm_ops, xuartps_suspend, xuartps_resume);
  * xuartps_probe - Platform driver probe
  * @pdev: Pointer to the platform device structure
  *
- * Returns 0 on success, negative error otherwise
- **/
+ * Return: 0 on success, negative error otherwise
+ */
 static int xuartps_probe(struct platform_device *pdev)
 {
 	int rc;
@@ -1437,8 +1426,8 @@ err_out_clk_dis_aper:
  * xuartps_remove - called when the platform driver is unregistered
  * @pdev: Pointer to the platform device structure
  *
- * Returns 0 on success, negative error otherwise
- **/
+ * Return: 0 on success, negative error otherwise
+ */
 static int xuartps_remove(struct platform_device *pdev)
 {
 	struct uart_port *port = platform_get_drvdata(pdev);
@@ -1481,8 +1470,8 @@ static struct platform_driver xuartps_platform_driver = {
 /**
  * xuartps_init - Initial driver registration call
  *
- * Returns whether the registration was successful or not
- **/
+ * Return: whether the registration was successful or not
+ */
 static int __init xuartps_init(void)
 {
 	int retval = 0;
@@ -1502,7 +1491,7 @@ static int __init xuartps_init(void)
 
 /**
  * xuartps_exit - Driver unregistration call
- **/
+ */
 static void __exit xuartps_exit(void)
 {
 	/* The order of unregistration is important. Unregister the