summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qla4xxx
diff options
context:
space:
mode:
authorManish Rangankar <manish.rangankar@qlogic.com>2012-02-13 18:30:43 +0530
committerJames Bottomley <JBottomley@Parallels.com>2012-02-19 09:32:12 -0600
commite8fb00e068e057ad2fc28fd0d398ff028bc540ff (patch)
tree9e22edf4b6e98e823cb240b4e20c0da566aea8e7 /drivers/scsi/qla4xxx
parent20e835b43f3f81e29f34e06099a47285ffebe688 (diff)
downloadblackbird-op-linux-e8fb00e068e057ad2fc28fd0d398ff028bc540ff.tar.gz
blackbird-op-linux-e8fb00e068e057ad2fc28fd0d398ff028bc540ff.zip
[SCSI] qla4xxx: Modified debug log messages for boot info.
In some configurations user may not have boot targets configured. In such cases the debug messages printed out by driver look like some kind of failure happening. However this could be a valid case, so modified the messages to appear as warning messages versus failure messages. Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Diffstat (limited to 'drivers/scsi/qla4xxx')
-rw-r--r--drivers/scsi/qla4xxx/ql4_os.c26
1 files changed, 12 insertions, 14 deletions
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index a9ff05e24f34..3339cc1e3390 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -3393,9 +3393,8 @@ static int get_fw_boot_info(struct scsi_qla_host *ha, uint16_t ddb_index[])
/* Check Boot Mode */
val = rd_nvram_byte(ha, addr);
if (!(val & 0x07)) {
- DEBUG2(ql4_printk(KERN_ERR, ha,
- "%s: Failed Boot options : 0x%x\n",
- __func__, val));
+ DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Adapter boot "
+ "options : 0x%x\n", __func__, val));
ret = QLA_ERROR;
goto exit_boot_info;
}
@@ -3440,9 +3439,8 @@ static int get_fw_boot_info(struct scsi_qla_host *ha, uint16_t ddb_index[])
}
/* Check Boot Mode */
if (!(buf[1] & 0x07)) {
- DEBUG2(ql4_printk(KERN_INFO, ha,
- "Failed: Boot options : 0x%x\n",
- buf[1]));
+ DEBUG2(ql4_printk(KERN_INFO, ha, "Firmware boot options"
+ " : 0x%x\n", buf[1]));
ret = QLA_ERROR;
goto exit_boot_info_free;
}
@@ -3548,8 +3546,8 @@ static int qla4xxx_get_boot_target(struct scsi_qla_host *ha,
if (qla4xxx_bootdb_by_index(ha, fw_ddb_entry,
fw_ddb_entry_dma, ddb_index)) {
- DEBUG2(ql4_printk(KERN_ERR, ha,
- "%s: Flash DDB read Failed\n", __func__));
+ DEBUG2(ql4_printk(KERN_INFO, ha, "%s: No Flash DDB found at "
+ "index [%d]\n", __func__, ddb_index));
ret = QLA_ERROR;
goto exit_boot_target;
}
@@ -3627,8 +3625,8 @@ static int qla4xxx_get_boot_info(struct scsi_qla_host *ha)
ddb_index[1] = 0xffff;
ret = get_fw_boot_info(ha, ddb_index);
if (ret != QLA_SUCCESS) {
- DEBUG2(ql4_printk(KERN_ERR, ha,
- "%s: Failed to set boot info.\n", __func__));
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "%s: No boot target configured.\n", __func__));
return ret;
}
@@ -3641,8 +3639,8 @@ static int qla4xxx_get_boot_info(struct scsi_qla_host *ha)
rval = qla4xxx_get_boot_target(ha, &(ha->boot_tgt.boot_pri_sess),
ddb_index[0]);
if (rval != QLA_SUCCESS) {
- DEBUG2(ql4_printk(KERN_ERR, ha, "%s: Failed to get "
- "primary target\n", __func__));
+ DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Primary boot target not "
+ "configured\n", __func__));
} else
ret = QLA_SUCCESS;
@@ -3653,8 +3651,8 @@ sec_target:
rval = qla4xxx_get_boot_target(ha, &(ha->boot_tgt.boot_sec_sess),
ddb_index[1]);
if (rval != QLA_SUCCESS) {
- DEBUG2(ql4_printk(KERN_ERR, ha, "%s: Failed to get "
- "secondary target\n", __func__));
+ DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Secondary boot target not"
+ " configured\n", __func__));
} else
ret = QLA_SUCCESS;
OpenPOWER on IntegriCloud