diff options
| author | Vikas Chaudhary <vikas.chaudhary@qlogic.com> | 2010-10-06 22:51:09 -0700 |
|---|---|---|
| committer | James Bottomley <James.Bottomley@suse.de> | 2010-10-25 14:54:16 -0500 |
| commit | d64eab764aaf1455d4cd790e3651a2d65b69e661 (patch) | |
| tree | cd48c552c788c31da19694a70f648b4682b0cc62 /drivers/scsi/qla4xxx | |
| parent | 7b3595df0e064c8d85ddb6836aaa2af3956fb2ba (diff) | |
| download | blackbird-op-linux-d64eab764aaf1455d4cd790e3651a2d65b69e661.tar.gz blackbird-op-linux-d64eab764aaf1455d4cd790e3651a2d65b69e661.zip | |
[SCSI] qla4xxx: remove unwanted check for bad spd
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Diffstat (limited to 'drivers/scsi/qla4xxx')
| -rw-r--r-- | drivers/scsi/qla4xxx/ql4_nx.c | 17 | ||||
| -rw-r--r-- | drivers/scsi/qla4xxx/ql4_nx.h | 3 |
2 files changed, 0 insertions, 20 deletions
diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c index 74582cb46a28..474b10d71364 100644 --- a/drivers/scsi/qla4xxx/ql4_nx.c +++ b/drivers/scsi/qla4xxx/ql4_nx.c @@ -1081,21 +1081,6 @@ qla4_8xxx_pinit_from_rom(struct scsi_qla_host *ha, int verbose) return 0; } -static int qla4_8xxx_check_for_bad_spd(struct scsi_qla_host *ha) -{ - u32 val = 0; - val = qla4_8xxx_rd_32(ha, BOOT_LOADER_DIMM_STATUS) ; - val &= QLA82XX_BOOT_LOADER_MN_ISSUE; - if (val & QLA82XX_PEG_TUNE_MN_SPD_ZEROED) { - printk("Memory DIMM SPD not programmed. Assumed valid.\n"); - return 1; - } else if (val) { - printk("Memory DIMM type incorrect. Info:%08X.\n", val); - return 2; - } - return 0; -} - static int qla4_8xxx_load_from_flash(struct scsi_qla_host *ha, uint32_t image_start) { @@ -1380,8 +1365,6 @@ static int qla4_8xxx_cmdpeg_ready(struct scsi_qla_host *ha, int pegtune_val) } while (--retries); - qla4_8xxx_check_for_bad_spd(ha); - if (!retries) { pegtune_val = qla4_8xxx_rd_32(ha, QLA82XX_ROMUSB_GLB_PEGTUNE_DONE); diff --git a/drivers/scsi/qla4xxx/ql4_nx.h b/drivers/scsi/qla4xxx/ql4_nx.h index 95f3060ad027..ff689bf53007 100644 --- a/drivers/scsi/qla4xxx/ql4_nx.h +++ b/drivers/scsi/qla4xxx/ql4_nx.h @@ -24,7 +24,6 @@ #define CRB_CMDPEG_STATE QLA82XX_REG(0x50) #define CRB_RCVPEG_STATE QLA82XX_REG(0x13c) -#define BOOT_LOADER_DIMM_STATUS QLA82XX_REG(0x54) #define CRB_DMA_SHIFT QLA82XX_REG(0xcc) #define QLA82XX_HW_H0_CH_HUB_ADR 0x05 @@ -529,8 +528,6 @@ # define QLA82XX_CAM_RAM_BASE (QLA82XX_CRB_CAM + 0x02000) # define QLA82XX_CAM_RAM(reg) (QLA82XX_CAM_RAM_BASE + (reg)) -#define QLA82XX_PEG_TUNE_MN_SPD_ZEROED 0x80000000 -#define QLA82XX_BOOT_LOADER_MN_ISSUE 0xff00ffff #define QLA82XX_PORT_MODE_ADDR (QLA82XX_CAM_RAM(0x24)) #define QLA82XX_PEG_HALT_STATUS1 (QLA82XX_CAM_RAM(0xa8)) #define QLA82XX_PEG_HALT_STATUS2 (QLA82XX_CAM_RAM(0xac)) |
