scsi: megaraid_sas: Add support for FW snap dump

Latest firmware adds a mechanism to save firmware logs just before
controller reset on pre-allocated internal controller DRAM. This feature is
called snapdump which will help debugging firmware issues.  This feature
requires extra time and firmware reports these values through new driver
interface. Before initiating an OCR, driver needs to inform FW to save a
snapdump and then wait for a specified time for the snapdump to complete.

Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

1 files changed, 58 insertions, 8 deletions

diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c
index 9ca4a52164bd..2868b71add2d 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -3884,14 +3884,57 @@ megasas_check_reset_fusion(struct megasas_instance *instance,
 	return 0;
 }
 
+/**
+ * megasas_trigger_snap_dump -	Trigger snap dump in FW
+ * @instance:			Soft instance of adapter
+ */
+static inline void megasas_trigger_snap_dump(struct megasas_instance *instance)
+{
+	int j;
+	u32 fw_state;
+
+	if (!instance->disableOnlineCtrlReset) {
+		dev_info(&instance->pdev->dev, "Trigger snap dump\n");
+		writel(MFI_ADP_TRIGGER_SNAP_DUMP,
+		       &instance->reg_set->doorbell);
+		readl(&instance->reg_set->doorbell);
+	}
+
+	for (j = 0; j < instance->snapdump_wait_time; j++) {
+		fw_state = instance->instancet->read_fw_status_reg(
+			instance->reg_set) & MFI_STATE_MASK;
+		if (fw_state == MFI_STATE_FAULT) {
+			dev_err(&instance->pdev->dev,
+				"Found FW in FAULT state, after snap dump trigger\n");
+			return;
+		}
+		msleep(1000);
+	}
+}
+
 /* This function waits for outstanding commands on fusion to complete */
 int megasas_wait_for_outstanding_fusion(struct megasas_instance *instance,
 					int reason, int *convert)
 {
 	int i, outstanding, retval = 0, hb_seconds_missed = 0;
 	u32 fw_state;
+	u32 waittime_for_io_completion;
 
-	for (i = 0; i < resetwaittime; i++) {
+	waittime_for_io_completion =
+		min_t(u32, resetwaittime,
+			(resetwaittime - instance->snapdump_wait_time));
+
+	if (reason == MFI_IO_TIMEOUT_OCR) {
+		dev_info(&instance->pdev->dev,
+			"MFI command is timed out\n");
+		megasas_complete_cmd_dpc_fusion((unsigned long)instance);
+		if (instance->snapdump_wait_time)
+			megasas_trigger_snap_dump(instance);
+		retval = 1;
+		goto out;
+	}
+
+	for (i = 0; i < waittime_for_io_completion; i++) {
 		/* Check if firmware is in fault state */
 		fw_state = instance->instancet->read_fw_status_reg(
 			instance->reg_set) & MFI_STATE_MASK;
@@ -3912,13 +3955,6 @@ int megasas_wait_for_outstanding_fusion(struct megasas_instance *instance,
 			goto out;
 		}
 
-		if (reason == MFI_IO_TIMEOUT_OCR) {
-			dev_info(&instance->pdev->dev,
-				"MFI IO is timed out, initiating OCR\n");
-			megasas_complete_cmd_dpc_fusion((unsigned long)instance);
-			retval = 1;
-			goto out;
-		}
 
 		/* If SR-IOV VF mode & heartbeat timeout, don't wait */
 		if (instance->requestorId && !reason) {
@@ -3963,6 +3999,12 @@ int megasas_wait_for_outstanding_fusion(struct megasas_instance *instance,
 		msleep(1000);
 	}
 
+	if (instance->snapdump_wait_time) {
+		megasas_trigger_snap_dump(instance);
+		retval = 1;
+		goto out;
+	}
+
 	if (atomic_read(&instance->fw_outstanding)) {
 		dev_err(&instance->pdev->dev, "pending commands remain after waiting, "
 		       "will reset adapter scsi%d.\n",
@@ -3970,6 +4012,7 @@ int megasas_wait_for_outstanding_fusion(struct megasas_instance *instance,
 		*convert = 1;
 		retval = 1;
 	}
+
 out:
 	return retval;
 }
@@ -4783,6 +4826,13 @@ transition_to_ready:
 				megasas_set_crash_dump_params(instance,
 					MR_CRASH_BUF_TURN_OFF);
 
+			if (instance->snapdump_wait_time) {
+				megasas_get_snapdump_properties(instance);
+				dev_info(&instance->pdev->dev,
+					 "Snap dump wait time\t: %d\n",
+					 instance->snapdump_wait_time);
+			}
+
 			retval = SUCCESS;
 
 			/* Adapter reset completed successfully */