scsi: hisi_sas: update PHY linkrate after a controller reset

After the controller is reset, we currently may not honour the PHY max
linkrate set via sysfs, in that after a reset we always revert to max
linkrate of 12Gbps, ignoring the value set via sysfs.

This patch modifies to policy to set the programmed PHY linkrate,
honouring the max linkrate programmed via sysfs.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

1 files changed, 18 insertions, 13 deletions

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 6dda6eb50918..9e687319b8bc 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -1216,7 +1216,22 @@ static void init_reg_v2_hw(struct hisi_hba *hisi_hba)
 	}
 
 	for (i = 0; i < hisi_hba->n_phy; i++) {
-		hisi_sas_phy_write32(hisi_hba, i, PROG_PHY_LINK_RATE, 0x855);
+		struct hisi_sas_phy *phy = &hisi_hba->phy[i];
+		struct asd_sas_phy *sas_phy = &phy->sas_phy;
+		u32 prog_phy_link_rate = 0x800;
+
+		if (!sas_phy->phy || (sas_phy->phy->maximum_linkrate <
+				SAS_LINK_RATE_1_5_GBPS)) {
+			prog_phy_link_rate = 0x855;
+		} else {
+			enum sas_linkrate max = sas_phy->phy->maximum_linkrate;
+
+			prog_phy_link_rate =
+				hisi_sas_get_prog_phy_linkrate_mask(max) |
+				0x800;
+		}
+		hisi_sas_phy_write32(hisi_hba, i, PROG_PHY_LINK_RATE,
+			prog_phy_link_rate);
 		hisi_sas_phy_write32(hisi_hba, i, SAS_PHY_CTRL, sas_phy_ctrl);
 		hisi_sas_phy_write32(hisi_hba, i, SL_TOUT_CFG, 0x7d7d7d7d);
 		hisi_sas_phy_write32(hisi_hba, i, SL_CONTROL, 0x0);
@@ -1585,13 +1600,10 @@ static enum sas_linkrate phy_get_max_linkrate_v2_hw(void)
 static void phy_set_linkrate_v2_hw(struct hisi_hba *hisi_hba, int phy_no,
 		struct sas_phy_linkrates *r)
 {
-	u32 prog_phy_link_rate =
-		hisi_sas_phy_read32(hisi_hba, phy_no, PROG_PHY_LINK_RATE);
 	struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
 	struct asd_sas_phy *sas_phy = &phy->sas_phy;
-	int i;
 	enum sas_linkrate min, max;
-	u32 rate_mask = 0;
+	u32 prog_phy_link_rate = 0x800;
 
 	if (r->maximum_linkrate == SAS_LINK_RATE_UNKNOWN) {
 		max = sas_phy->phy->maximum_linkrate;
@@ -1604,14 +1616,7 @@ static void phy_set_linkrate_v2_hw(struct hisi_hba *hisi_hba, int phy_no,
 
 	sas_phy->phy->maximum_linkrate = max;
 	sas_phy->phy->minimum_linkrate = min;
-
-	max -= SAS_LINK_RATE_1_5_GBPS;
-
-	for (i = 0; i <= max; i++)
-		rate_mask |= 1 << (i * 2);
-
-	prog_phy_link_rate &= ~0xff;
-	prog_phy_link_rate |= rate_mask;
+	prog_phy_link_rate |= hisi_sas_get_prog_phy_linkrate_mask(max);
 
 	disable_phy_v2_hw(hisi_hba, phy_no);
 	msleep(100);