Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights (1721 non-merge commits, this has to be a record of some
  sort):

   1) Add 'random' mode to team driver, from Jiri Pirko and Eric
      Dumazet.

   2) Make it so that any driver that supports configuration of multiple
      MAC addresses can provide the forwarding database add and del
      calls by providing a default implementation and hooking that up if
      the driver doesn't have an explicit set of handlers.  From Vlad
      Yasevich.

   3) Support GSO segmentation over tunnels and other encapsulating
      devices such as VXLAN, from Pravin B Shelar.

   4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton.

   5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita
      Dukkipati.

   6) In the PHY layer, allow supporting wake-on-lan in situations where
      the PHY registers have to be written for it to be configured.

      Use it to support wake-on-lan in mv643xx_eth.

      From Michael Stapelberg.

   7) Significantly improve firewire IPV6 support, from YOSHIFUJI
      Hideaki.

   8) Allow multiple packets to be sent in a single transmission using
      network coding in batman-adv, from Martin Hundebøll.

   9) Add support for T5 cxgb4 chips, from Santosh Rastapur.

  10) Generalize the VXLAN forwarding tables so that there is more
      flexibility in configurating various aspects of the endpoints.
      From David Stevens.

  11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver,
      from Dmitry Kravkov.

  12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo
      Neira Ayuso.

  13) Start adding networking selftests.

  14) In situations of overload on the same AF_PACKET fanout socket, or
      per-cpu packet receive queue, minimize drop by distributing the
      load to other cpus/fanouts.  From Willem de Bruijn and Eric
      Dumazet.

  15) Add support for new payload offset BPF instruction, from Daniel
      Borkmann.

  16) Convert several drivers over to mdoule_platform_driver(), from
      Sachin Kamat.

  17) Provide a minimal BPF JIT image disassembler userspace tool, from
      Daniel Borkmann.

  18) Rewrite F-RTO implementation in TCP to match the final
      specification of it in RFC4138 and RFC5682.  From Yuchung Cheng.

  19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear
      you like netlink, so I implemented netlink dumping of netlink
      sockets.") From Andrey Vagin.

  20) Remove ugly passing of rtnetlink attributes into rtnl_doit
      functions, from Thomas Graf.

  21) Allow userspace to be able to see if a configuration change occurs
      in the middle of an address or device list dump, from Nicolas
      Dichtel.

  22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes
      Frederic Sowa.

  23) Increase accuracy of packet length used by packet scheduler, from
      Jason Wang.

  24) Beginning set of changes to make ipv4/ipv6 fragment handling more
      scalable and less susceptible to overload and locking contention,
      from Jesper Dangaard Brouer.

  25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*()
      instead.  From Hong Zhiguo.

  26) Optimize route usage in IPVS by avoiding reference counting where
      possible, from Julian Anastasov.

  27) Convert IPVS schedulers to RCU, also from Julian Anastasov.

  28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger
      Eitzenberger.

  29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG,
      nfnetlink_log, and nfnetlink_queue.  From Gao feng.

  30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa.

  31) Support several new r8169 chips, from Hayes Wang.

  32) Support tokenized interface identifiers in ipv6, from Daniel
      Borkmann.

  33) Use usbnet_link_change() helper in USB net driver, from Ming Lei.

  34) Add 802.1ad vlan offload support, from Patrick McHardy.

  35) Support mmap() based netlink communication, also from Patrick
      McHardy.

  36) Support HW timestamping in mlx4 driver, from Amir Vadai.

  37) Rationalize AF_PACKET packet timestamping when transmitting, from
      Willem de Bruijn and Daniel Borkmann.

  38) Bring parity to what's provided by /proc/net/packet socket dumping
      and the info provided by netlink socket dumping of AF_PACKET
      sockets.  From Nicolas Dichtel.

  39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin
      Poirier"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits)
  filter: fix va_list build error
  af_unix: fix a fatal race with bit fields
  bnx2x: Prevent memory leak when cnic is absent
  bnx2x: correct reading of speed capabilities
  net: sctp: attribute printl with __printf for gcc fmt checks
  netlink: kconfig: move mmap i/o into netlink kconfig
  netpoll: convert mutex into a semaphore
  netlink: Fix skb ref counting.
  net_sched: act_ipt forward compat with xtables
  mlx4_en: fix a build error on 32bit arches
  Revert "bnx2x: allow nvram test to run when device is down"
  bridge: avoid OOPS if root port not found
  drivers: net: cpsw: fix kernel warn on cpsw irq enable
  sh_eth: use random MAC address if no valid one supplied
  3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA)
  tg3: fix to append hardware time stamping flags
  unix/stream: fix peeking with an offset larger than data in queue
  unix/dgram: fix peeking with an offset larger than data in queue
  unix/dgram: peek beyond 0-sized skbs
  openvswitch: Remove unneeded ovs_netdev_get_ifindex()
  ...

1 files changed, 119 insertions, 440 deletions

diff --git a/drivers/scsi/csiostor/csio_hw.c b/drivers/scsi/csiostor/csio_hw.c
index 7dbaf58fab9f..193605519361 100644
--- a/drivers/scsi/csiostor/csio_hw.c
+++ b/drivers/scsi/csiostor/csio_hw.c
@@ -61,7 +61,7 @@ int csio_msi = 2;
 static int dev_num;
 
 /* FCoE Adapter types & its description */
-static const struct csio_adap_desc csio_fcoe_adapters[] = {
+static const struct csio_adap_desc csio_t4_fcoe_adapters[] = {
 	{"T440-Dbg 10G", "Chelsio T440-Dbg 10G [FCoE]"},
 	{"T420-CR 10G", "Chelsio T420-CR 10G [FCoE]"},
 	{"T422-CR 10G/1G", "Chelsio T422-CR 10G/1G [FCoE]"},
@@ -77,7 +77,38 @@ static const struct csio_adap_desc csio_fcoe_adapters[] = {
 	{"B404-BT 1G", "Chelsio B404-BT 1G [FCoE]"},
 	{"T480-CR 10G", "Chelsio T480-CR 10G [FCoE]"},
 	{"T440-LP-CR 10G", "Chelsio T440-LP-CR 10G [FCoE]"},
-	{"T4 FPGA", "Chelsio T4 FPGA [FCoE]"}
+	{"AMSTERDAM 10G", "Chelsio AMSTERDAM 10G [FCoE]"},
+	{"HUAWEI T480 10G", "Chelsio HUAWEI T480 10G [FCoE]"},
+	{"HUAWEI T440 10G", "Chelsio HUAWEI T440 10G [FCoE]"},
+	{"HUAWEI STG 10G", "Chelsio HUAWEI STG 10G [FCoE]"},
+	{"ACROMAG XAUI 10G", "Chelsio ACROMAG XAUI 10G [FCoE]"},
+	{"ACROMAG SFP+ 10G", "Chelsio ACROMAG SFP+ 10G [FCoE]"},
+	{"QUANTA SFP+ 10G", "Chelsio QUANTA SFP+ 10G [FCoE]"},
+	{"HUAWEI 10Gbase-T", "Chelsio HUAWEI 10Gbase-T [FCoE]"},
+	{"HUAWEI T4TOE 10G", "Chelsio HUAWEI T4TOE 10G [FCoE]"}
+};
+
+static const struct csio_adap_desc csio_t5_fcoe_adapters[] = {
+	{"T580-Dbg 10G", "Chelsio T580-Dbg 10G [FCoE]"},
+	{"T520-CR 10G", "Chelsio T520-CR 10G [FCoE]"},
+	{"T522-CR 10G/1G", "Chelsio T452-CR 10G/1G [FCoE]"},
+	{"T540-CR 10G", "Chelsio T540-CR 10G [FCoE]"},
+	{"T520-BCH 10G", "Chelsio T520-BCH 10G [FCoE]"},
+	{"T540-BCH 10G", "Chelsio T540-BCH 10G [FCoE]"},
+	{"T540-CH 10G", "Chelsio T540-CH 10G [FCoE]"},
+	{"T520-SO 10G", "Chelsio T520-SO 10G [FCoE]"},
+	{"T520-CX4 10G", "Chelsio T520-CX4 10G [FCoE]"},
+	{"T520-BT 10G", "Chelsio T520-BT 10G [FCoE]"},
+	{"T504-BT 1G", "Chelsio T504-BT 1G [FCoE]"},
+	{"B520-SR 10G", "Chelsio B520-SR 10G [FCoE]"},
+	{"B504-BT 1G", "Chelsio B504-BT 1G [FCoE]"},
+	{"T580-CR 10G", "Chelsio T580-CR 10G [FCoE]"},
+	{"T540-LP-CR 10G", "Chelsio T540-LP-CR 10G [FCoE]"},
+	{"AMSTERDAM 10G", "Chelsio AMSTERDAM 10G [FCoE]"},
+	{"T580-LP-CR 40G", "Chelsio T580-LP-CR 40G [FCoE]"},
+	{"T520-LL-CR 10G", "Chelsio T520-LL-CR 10G [FCoE]"},
+	{"T560-CR 40G", "Chelsio T560-CR 40G [FCoE]"},
+	{"T580-CR 40G", "Chelsio T580-CR 40G [FCoE]"}
 };
 
 static void csio_mgmtm_cleanup(struct csio_mgmtm *);
@@ -124,7 +155,7 @@ int csio_is_hw_removing(struct csio_hw *hw)
  *	at the time it indicated completion is stored there.  Returns 0 if the
  *	operation completes and	-EAGAIN	otherwise.
  */
-static int
+int
 csio_hw_wait_op_done_val(struct csio_hw *hw, int reg, uint32_t mask,
 			 int polarity, int attempts, int delay, uint32_t *valp)
 {
@@ -145,6 +176,24 @@ csio_hw_wait_op_done_val(struct csio_hw *hw, int reg, uint32_t mask,
 	}
 }
 
+/*
+ *	csio_hw_tp_wr_bits_indirect - set/clear bits in an indirect TP register
+ *	@hw: the adapter
+ *	@addr: the indirect TP register address
+ *	@mask: specifies the field within the register to modify
+ *	@val: new value for the field
+ *
+ *	Sets a field of an indirect TP register to the given value.
+ */
+void
+csio_hw_tp_wr_bits_indirect(struct csio_hw *hw, unsigned int addr,
+			unsigned int mask, unsigned int val)
+{
+	csio_wr_reg32(hw, addr, TP_PIO_ADDR);
+	val |= csio_rd_reg32(hw, TP_PIO_DATA) & ~mask;
+	csio_wr_reg32(hw, val, TP_PIO_DATA);
+}
+
 void
 csio_set_reg_field(struct csio_hw *hw, uint32_t reg, uint32_t mask,
 		   uint32_t value)
@@ -157,242 +206,22 @@ csio_set_reg_field(struct csio_hw *hw, uint32_t reg, uint32_t mask,
 
 }
 
-/*
- *	csio_hw_mc_read - read from MC through backdoor accesses
- *	@hw: the hw module
- *	@addr: address of first byte requested
- *	@data: 64 bytes of data containing the requested address
- *	@ecc: where to store the corresponding 64-bit ECC word
- *
- *	Read 64 bytes of data from MC starting at a 64-byte-aligned address
- *	that covers the requested address @addr.  If @parity is not %NULL it
- *	is assigned the 64-bit ECC word for the read data.
- */
-int
-csio_hw_mc_read(struct csio_hw *hw, uint32_t addr, __be32 *data,
-		uint64_t *ecc)
-{
-	int i;
-
-	if (csio_rd_reg32(hw, MC_BIST_CMD) & START_BIST)
-		return -EBUSY;
-	csio_wr_reg32(hw, addr & ~0x3fU, MC_BIST_CMD_ADDR);
-	csio_wr_reg32(hw, 64, MC_BIST_CMD_LEN);
-	csio_wr_reg32(hw, 0xc, MC_BIST_DATA_PATTERN);
-	csio_wr_reg32(hw, BIST_OPCODE(1) | START_BIST |  BIST_CMD_GAP(1),
-		      MC_BIST_CMD);
-	i = csio_hw_wait_op_done_val(hw, MC_BIST_CMD, START_BIST,
-		 0, 10, 1, NULL);
-	if (i)
-		return i;
-
-#define MC_DATA(i) MC_BIST_STATUS_REG(MC_BIST_STATUS_RDATA, i)
-
-	for (i = 15; i >= 0; i--)
-		*data++ = htonl(csio_rd_reg32(hw, MC_DATA(i)));
-	if (ecc)
-		*ecc = csio_rd_reg64(hw, MC_DATA(16));
-#undef MC_DATA
-	return 0;
-}
-
-/*
- *	csio_hw_edc_read - read from EDC through backdoor accesses
- *	@hw: the hw module
- *	@idx: which EDC to access
- *	@addr: address of first byte requested
- *	@data: 64 bytes of data containing the requested address
- *	@ecc: where to store the corresponding 64-bit ECC word
- *
- *	Read 64 bytes of data from EDC starting at a 64-byte-aligned address
- *	that covers the requested address @addr.  If @parity is not %NULL it
- *	is assigned the 64-bit ECC word for the read data.
- */
-int
-csio_hw_edc_read(struct csio_hw *hw, int idx, uint32_t addr, __be32 *data,
-		uint64_t *ecc)
-{
-	int i;
-
-	idx *= EDC_STRIDE;
-	if (csio_rd_reg32(hw, EDC_BIST_CMD + idx) & START_BIST)
-		return -EBUSY;
-	csio_wr_reg32(hw, addr & ~0x3fU, EDC_BIST_CMD_ADDR + idx);
-	csio_wr_reg32(hw, 64, EDC_BIST_CMD_LEN + idx);
-	csio_wr_reg32(hw, 0xc, EDC_BIST_DATA_PATTERN + idx);
-	csio_wr_reg32(hw, BIST_OPCODE(1) | BIST_CMD_GAP(1) | START_BIST,
-		     EDC_BIST_CMD + idx);
-	i = csio_hw_wait_op_done_val(hw, EDC_BIST_CMD + idx, START_BIST,
-		 0, 10, 1, NULL);
-	if (i)
-		return i;
-
-#define EDC_DATA(i) (EDC_BIST_STATUS_REG(EDC_BIST_STATUS_RDATA, i) + idx)
-
-	for (i = 15; i >= 0; i--)
-		*data++ = htonl(csio_rd_reg32(hw, EDC_DATA(i)));
-	if (ecc)
-		*ecc = csio_rd_reg64(hw, EDC_DATA(16));
-#undef EDC_DATA
-	return 0;
-}
-
-/*
- *      csio_mem_win_rw - read/write memory through PCIE memory window
- *      @hw: the adapter
- *      @addr: address of first byte requested
- *      @data: MEMWIN0_APERTURE bytes of data containing the requested address
- *      @dir: direction of transfer 1 => read, 0 => write
- *
- *      Read/write MEMWIN0_APERTURE bytes of data from MC starting at a
- *      MEMWIN0_APERTURE-byte-aligned address that covers the requested
- *      address @addr.
- */
-static int
-csio_mem_win_rw(struct csio_hw *hw, u32 addr, u32 *data, int dir)
-{
-	int i;
-
-	/*
-	 * Setup offset into PCIE memory window.  Address must be a
-	 * MEMWIN0_APERTURE-byte-aligned address.  (Read back MA register to
-	 * ensure that changes propagate before we attempt to use the new
-	 * values.)
-	 */
-	csio_wr_reg32(hw, addr & ~(MEMWIN0_APERTURE - 1),
-			PCIE_MEM_ACCESS_OFFSET);
-	csio_rd_reg32(hw, PCIE_MEM_ACCESS_OFFSET);
-
-	/* Collecting data 4 bytes at a time upto MEMWIN0_APERTURE */
-	for (i = 0; i < MEMWIN0_APERTURE; i = i + sizeof(__be32)) {
-		if (dir)
-			*data++ = csio_rd_reg32(hw, (MEMWIN0_BASE + i));
-		else
-			csio_wr_reg32(hw, *data++, (MEMWIN0_BASE + i));
-	}
-
-	return 0;
-}
-
-/*
- *      csio_memory_rw - read/write EDC 0, EDC 1 or MC via PCIE memory window
- *      @hw: the csio_hw
- *      @mtype: memory type: MEM_EDC0, MEM_EDC1 or MEM_MC
- *      @addr: address within indicated memory type
- *      @len: amount of memory to transfer
- *      @buf: host memory buffer
- *      @dir: direction of transfer 1 => read, 0 => write
- *
- *      Reads/writes an [almost] arbitrary memory region in the firmware: the
- *      firmware memory address, length and host buffer must be aligned on
- *      32-bit boudaries.  The memory is transferred as a raw byte sequence
- *      from/to the firmware's memory.  If this memory contains data
- *      structures which contain multi-byte integers, it's the callers
- *      responsibility to perform appropriate byte order conversions.
- */
-static int
-csio_memory_rw(struct csio_hw *hw, int mtype, u32 addr, u32 len,
-		uint32_t *buf, int dir)
-{
-	uint32_t pos, start, end, offset, memoffset;
-	int ret;
-	uint32_t *data;
-
-	/*
-	 * Argument sanity checks ...
-	 */
-	if ((addr & 0x3) || (len & 0x3))
-		return -EINVAL;
-
-	data = kzalloc(MEMWIN0_APERTURE, GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	/* Offset into the region of memory which is being accessed
-	 * MEM_EDC0 = 0
-	 * MEM_EDC1 = 1
-	 * MEM_MC   = 2
-	 */
-	memoffset = (mtype * (5 * 1024 * 1024));
-
-	/* Determine the PCIE_MEM_ACCESS_OFFSET */
-	addr = addr + memoffset;
-
-	/*
-	 * The underlaying EDC/MC read routines read MEMWIN0_APERTURE bytes
-	 * at a time so we need to round down the start and round up the end.
-	 * We'll start copying out of the first line at (addr - start) a word
-	 * at a time.
-	 */
-	start = addr & ~(MEMWIN0_APERTURE-1);
-	end = (addr + len + MEMWIN0_APERTURE-1) & ~(MEMWIN0_APERTURE-1);
-	offset = (addr - start)/sizeof(__be32);
-
-	for (pos = start; pos < end; pos += MEMWIN0_APERTURE, offset = 0) {
-		/*
-		 * If we're writing, copy the data from the caller's memory
-		 * buffer
-		 */
-		if (!dir) {
-			/*
-			 * If we're doing a partial write, then we need to do
-			 * a read-modify-write ...
-			 */
-			if (offset || len < MEMWIN0_APERTURE) {
-				ret = csio_mem_win_rw(hw, pos, data, 1);
-				if (ret) {
-					kfree(data);
-					return ret;
-				}
-			}
-			while (offset < (MEMWIN0_APERTURE/sizeof(__be32)) &&
-								len > 0) {
-				data[offset++] = *buf++;
-				len -= sizeof(__be32);
-			}
-		}
-
-		/*
-		 * Transfer a block of memory and bail if there's an error.
-		 */
-		ret = csio_mem_win_rw(hw, pos, data, dir);
-		if (ret) {
-			kfree(data);
-			return ret;
-		}
-
-		/*
-		 * If we're reading, copy the data into the caller's memory
-		 * buffer.
-		 */
-		if (dir)
-			while (offset < (MEMWIN0_APERTURE/sizeof(__be32)) &&
-								len > 0) {
-				*buf++ = data[offset++];
-				len -= sizeof(__be32);
-			}
-	}
-
-	kfree(data);
-
-	return 0;
-}
-
 static int
 csio_memory_write(struct csio_hw *hw, int mtype, u32 addr, u32 len, u32 *buf)
 {
-	return csio_memory_rw(hw, mtype, addr, len, buf, 0);
+	return hw->chip_ops->chip_memory_rw(hw, MEMWIN_CSIOSTOR, mtype,
+					    addr, len, buf, 0);
 }
 
 /*
  * EEPROM reads take a few tens of us while writes can take a bit over 5 ms.
  */
-#define EEPROM_MAX_RD_POLL 40
-#define EEPROM_MAX_WR_POLL 6
-#define EEPROM_STAT_ADDR   0x7bfc
-#define VPD_BASE           0x400
-#define VPD_BASE_OLD	   0
-#define VPD_LEN            512
+#define EEPROM_MAX_RD_POLL	40
+#define EEPROM_MAX_WR_POLL	6
+#define EEPROM_STAT_ADDR	0x7bfc
+#define VPD_BASE		0x400
+#define VPD_BASE_OLD		0
+#define VPD_LEN			1024
 #define VPD_INFO_FLD_HDR_SIZE	3
 
 /*
@@ -817,23 +646,6 @@ out:
 	return 0;
 }
 
-/*
- *	csio_hw_flash_cfg_addr - return the address of the flash
- *				configuration file
- *	@hw: the HW module
- *
- *	Return the address within the flash where the Firmware Configuration
- *	File is stored.
- */
-static unsigned int
-csio_hw_flash_cfg_addr(struct csio_hw *hw)
-{
-	if (hw->params.sf_size == 0x100000)
-		return FPGA_FLASH_CFG_OFFSET;
-	else
-		return FLASH_CFG_OFFSET;
-}
-
 static void
 csio_hw_print_fw_version(struct csio_hw *hw, char *str)
 {
@@ -898,13 +710,13 @@ csio_hw_check_fw_version(struct csio_hw *hw)
 	minor = FW_HDR_FW_VER_MINOR_GET(hw->fwrev);
 	micro = FW_HDR_FW_VER_MICRO_GET(hw->fwrev);
 
-	if (major != FW_VERSION_MAJOR) {            /* major mismatch - fail */
+	if (major != FW_VERSION_MAJOR(hw)) {	/* major mismatch - fail */
 		csio_err(hw, "card FW has major version %u, driver wants %u\n",
-			 major, FW_VERSION_MAJOR);
+			 major, FW_VERSION_MAJOR(hw));
 		return -EINVAL;
 	}
 
-	if (minor == FW_VERSION_MINOR && micro == FW_VERSION_MICRO)
+	if (minor == FW_VERSION_MINOR(hw) && micro == FW_VERSION_MICRO(hw))
 		return 0;        /* perfect match */
 
 	/* Minor/micro version mismatch */
@@ -1044,7 +856,7 @@ static void
 csio_set_pcie_completion_timeout(struct csio_hw *hw, u8 range)
 {
 	uint16_t val;
-	uint32_t pcie_cap;
+	int pcie_cap;
 
 	if (!csio_pci_capability(hw->pdev, PCI_CAP_ID_EXP, &pcie_cap)) {
 		pci_read_config_word(hw->pdev,
@@ -1056,84 +868,6 @@ csio_set_pcie_completion_timeout(struct csio_hw *hw, u8 range)
 	}
 }
 
-
-/*
- * Return the specified PCI-E Configuration Space register from our Physical
- * Function.  We try first via a Firmware LDST Command since we prefer to let
- * the firmware own all of these registers, but if that fails we go for it
- * directly ourselves.
- */
-static uint32_t
-csio_read_pcie_cfg4(struct csio_hw *hw, int reg)
-{
-	u32 val = 0;
-	struct csio_mb *mbp;
-	int rv;
-	struct fw_ldst_cmd *ldst_cmd;
-
-	mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
-	if (!mbp) {
-		CSIO_INC_STATS(hw, n_err_nomem);
-		pci_read_config_dword(hw->pdev, reg, &val);
-		return val;
-	}
-
-	csio_mb_ldst(hw, mbp, CSIO_MB_DEFAULT_TMO, reg);
-
-	rv = csio_mb_issue(hw, mbp);
-
-	/*
-	 * If the LDST Command suucceeded, exctract the returned register
-	 * value.  Otherwise read it directly ourself.
-	 */
-	if (rv == 0) {
-		ldst_cmd = (struct fw_ldst_cmd *)(mbp->mb);
-		val = ntohl(ldst_cmd->u.pcie.data[0]);
-	} else
-		pci_read_config_dword(hw->pdev, reg, &val);
-
-	mempool_free(mbp, hw->mb_mempool);
-
-	return val;
-} /* csio_read_pcie_cfg4 */
-
-static int
-csio_hw_set_mem_win(struct csio_hw *hw)
-{
-	u32 bar0;
-
-	/*
-	 * Truncation intentional: we only read the bottom 32-bits of the
-	 * 64-bit BAR0/BAR1 ...  We use the hardware backdoor mechanism to
-	 * read BAR0 instead of using pci_resource_start() because we could be
-	 * operating from within a Virtual Machine which is trapping our
-	 * accesses to our Configuration Space and we need to set up the PCI-E
-	 * Memory Window decoders with the actual addresses which will be
-	 * coming across the PCI-E link.
-	 */
-	bar0 = csio_read_pcie_cfg4(hw, PCI_BASE_ADDRESS_0);
-	bar0 &= PCI_BASE_ADDRESS_MEM_MASK;
-
-	/*
-	 * Set up memory window for accessing adapter memory ranges.  (Read
-	 * back MA register to ensure that changes propagate before we attempt
-	 * to use the new values.)
-	 */
-	csio_wr_reg32(hw, (bar0 + MEMWIN0_BASE) | BIR(0) |
-		WINDOW(ilog2(MEMWIN0_APERTURE) - 10),
-		PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 0));
-	csio_wr_reg32(hw, (bar0 + MEMWIN1_BASE) | BIR(0) |
-		WINDOW(ilog2(MEMWIN1_APERTURE) - 10),
-		PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 1));
-	csio_wr_reg32(hw, (bar0 + MEMWIN2_BASE) | BIR(0) |
-		WINDOW(ilog2(MEMWIN2_APERTURE) - 10),
-		PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 2));
-	csio_rd_reg32(hw, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 2));
-	return 0;
-} /* csio_hw_set_mem_win */
-
-
-
 /*****************************************************************************/
 /* HW State machine assists                                                  */
 /*****************************************************************************/
@@ -1234,7 +968,9 @@ retry:
 		for (;;) {
 			uint32_t pcie_fw;
 
+			spin_unlock_irq(&hw->lock);
 			msleep(50);
+			spin_lock_irq(&hw->lock);
 			waiting -= 50;
 
 			/*
@@ -2121,9 +1857,9 @@ csio_hw_flash_config(struct csio_hw *hw, u32 *fw_cfg_param, char *path)
 	uint32_t *cfg_data;
 	int value_to_add = 0;
 
-	if (request_firmware(&cf, CSIO_CF_FNAME, dev) < 0) {
-		csio_err(hw, "could not find config file " CSIO_CF_FNAME
-			 ",err: %d\n", ret);
+	if (request_firmware(&cf, CSIO_CF_FNAME(hw), dev) < 0) {
+		csio_err(hw, "could not find config file %s, err: %d\n",
+			 CSIO_CF_FNAME(hw), ret);
 		return -ENOENT;
 	}
 
@@ -2147,9 +1883,24 @@ csio_hw_flash_config(struct csio_hw *hw, u32 *fw_cfg_param, char *path)
 
 	ret = csio_memory_write(hw, mtype, maddr,
 				cf->size + value_to_add, cfg_data);
+
+	if ((ret == 0) && (value_to_add != 0)) {
+		union {
+			u32 word;
+			char buf[4];
+		} last;
+		size_t size = cf->size & ~0x3;
+		int i;
+
+		last.word = cfg_data[size >> 2];
+		for (i = value_to_add; i < 4; i++)
+			last.buf[i] = 0;
+		ret = csio_memory_write(hw, mtype, maddr + size, 4, &last.word);
+	}
 	if (ret == 0) {
-		csio_info(hw, "config file upgraded to " CSIO_CF_FNAME "\n");
-		strncpy(path, "/lib/firmware/" CSIO_CF_FNAME, 64);
+		csio_info(hw, "config file upgraded to %s\n",
+			  CSIO_CF_FNAME(hw));
+		snprintf(path, 64, "%s%s", "/lib/firmware/", CSIO_CF_FNAME(hw));
 	}
 
 leave:
@@ -2179,7 +1930,7 @@ csio_hw_use_fwconfig(struct csio_hw *hw, int reset, u32 *fw_cfg_param)
 {
 	unsigned int mtype, maddr;
 	int rv;
-	uint32_t finiver, finicsum, cfcsum;
+	uint32_t finiver = 0, finicsum = 0, cfcsum = 0;
 	int using_flash;
 	char path[64];
 
@@ -2207,7 +1958,7 @@ csio_hw_use_fwconfig(struct csio_hw *hw, int reset, u32 *fw_cfg_param)
 			 * config file from flash.
 			 */
 			mtype = FW_MEMTYPE_CF_FLASH;
-			maddr = csio_hw_flash_cfg_addr(hw);
+			maddr = hw->chip_ops->chip_flash_cfg_addr(hw);
 			using_flash = 1;
 		} else {
 			/*
@@ -2346,30 +2097,32 @@ csio_hw_flash_fw(struct csio_hw *hw)
 	struct pci_dev *pci_dev = hw->pdev;
 	struct device *dev = &pci_dev->dev ;
 
-	if (request_firmware(&fw, CSIO_FW_FNAME, dev) < 0) {
-		csio_err(hw, "could not find firmware image " CSIO_FW_FNAME
-		",err: %d\n", ret);
+	if (request_firmware(&fw, CSIO_FW_FNAME(hw), dev) < 0) {
+		csio_err(hw, "could not find firmware image %s, err: %d\n",
+			 CSIO_FW_FNAME(hw), ret);
 		return -EINVAL;
 	}
 
 	hdr = (const struct fw_hdr *)fw->data;
 	fw_ver = ntohl(hdr->fw_ver);
-	if (FW_HDR_FW_VER_MAJOR_GET(fw_ver) != FW_VERSION_MAJOR)
+	if (FW_HDR_FW_VER_MAJOR_GET(fw_ver) != FW_VERSION_MAJOR(hw))
 		return -EINVAL;      /* wrong major version, won't do */
 
 	/*
 	 * If the flash FW is unusable or we found something newer, load it.
 	 */
-	if (FW_HDR_FW_VER_MAJOR_GET(hw->fwrev) != FW_VERSION_MAJOR ||
+	if (FW_HDR_FW_VER_MAJOR_GET(hw->fwrev) != FW_VERSION_MAJOR(hw) ||
 	    fw_ver > hw->fwrev) {
 		ret = csio_hw_fw_upgrade(hw, hw->pfn, fw->data, fw->size,
 				    /*force=*/false);
 		if (!ret)
-			csio_info(hw, "firmware upgraded to version %pI4 from "
-				  CSIO_FW_FNAME "\n", &hdr->fw_ver);
+			csio_info(hw,
+				  "firmware upgraded to version %pI4 from %s\n",
+				  &hdr->fw_ver, CSIO_FW_FNAME(hw));
 		else
 			csio_err(hw, "firmware upgrade failed! err=%d\n", ret);
-	}
+	} else
+		ret = -EINVAL;
 
 	release_firmware(fw);
 
@@ -2410,7 +2163,7 @@ csio_hw_configure(struct csio_hw *hw)
 	/* Set pci completion timeout value to 4 seconds. */
 	csio_set_pcie_completion_timeout(hw, 0xd);
 
-	csio_hw_set_mem_win(hw);
+	hw->chip_ops->chip_set_mem_win(hw, MEMWIN_CSIOSTOR);
 
 	rv = csio_hw_get_fw_version(hw, &hw->fwrev);
 	if (rv != 0)
@@ -2478,6 +2231,8 @@ csio_hw_configure(struct csio_hw *hw)
 	} else {
 		if (hw->fw_state == CSIO_DEV_STATE_INIT) {
 
+			hw->flags |= CSIO_HWF_USING_SOFT_PARAMS;
+
 			/* device parameters */
 			rv = csio_get_device_params(hw);
 			if (rv != 0)
@@ -2651,7 +2406,7 @@ csio_hw_intr_disable(struct csio_hw *hw)
 
 }
 
-static void
+void
 csio_hw_fatal_err(struct csio_hw *hw)
 {
 	csio_set_reg_field(hw, SGE_CONTROL, GLOBALENABLE, 0);
@@ -2990,14 +2745,6 @@ csio_hws_pcierr(struct csio_hw *hw, enum csio_hw_ev evt)
 /* END: HW SM                                                                */
 /*****************************************************************************/
 
-/* Slow path handlers */
-struct intr_info {
-	unsigned int mask;       /* bits to check in interrupt status */
-	const char *msg;         /* message to print or NULL */
-	short stat_idx;          /* stat counter to increment or -1 */
-	unsigned short fatal;    /* whether the condition reported is fatal */
-};
-
 /*
  *	csio_handle_intr_status - table driven interrupt handler
  *	@hw: HW instance
@@ -3011,7 +2758,7 @@ struct intr_info {
  *	by an entry specifying mask 0.  Returns the number of fatal interrupt
  *	conditions.
  */
-static int
+int
 csio_handle_intr_status(struct csio_hw *hw, unsigned int reg,
 				 const struct intr_info *acts)
 {
@@ -3038,80 +2785,6 @@ csio_handle_intr_status(struct csio_hw *hw, unsigned int reg,
 }
 
 /*
- * Interrupt handler for the PCIE module.
- */
-static void
-csio_pcie_intr_handler(struct csio_hw *hw)
-{
-	static struct intr_info sysbus_intr_info[] = {
-		{ RNPP, "RXNP array parity error", -1, 1 },
-		{ RPCP, "RXPC array parity error", -1, 1 },
-		{ RCIP, "RXCIF array parity error", -1, 1 },
-		{ RCCP, "Rx completions control array parity error", -1, 1 },
-		{ RFTP, "RXFT array parity error", -1, 1 },
-		{ 0, NULL, 0, 0 }
-	};
-	static struct intr_info pcie_port_intr_info[] = {
-		{ TPCP, "TXPC array parity error", -1, 1 },
-		{ TNPP, "TXNP array parity error", -1, 1 },
-		{ TFTP, "TXFT array parity error", -1, 1 },
-		{ TCAP, "TXCA array parity error", -1, 1 },
-		{ TCIP, "TXCIF array parity error", -1, 1 },
-		{ RCAP, "RXCA array parity error", -1, 1 },
-		{ OTDD, "outbound request TLP discarded", -1, 1 },
-		{ RDPE, "Rx data parity error", -1, 1 },
-		{ TDUE, "Tx uncorrectable data error", -1, 1 },
-		{ 0, NULL, 0, 0 }
-	};
-	static struct intr_info pcie_intr_info[] = {
-		{ MSIADDRLPERR, "MSI AddrL parity error", -1, 1 },
-		{ MSIADDRHPERR, "MSI AddrH parity error", -1, 1 },
-		{ MSIDATAPERR, "MSI data parity error", -1, 1 },
-		{ MSIXADDRLPERR, "MSI-X AddrL parity error", -1, 1 },
-		{ MSIXADDRHPERR, "MSI-X AddrH parity error", -1, 1 },
-		{ MSIXDATAPERR, "MSI-X data parity error", -1, 1 },
-		{ MSIXDIPERR, "MSI-X DI parity error", -1, 1 },
-		{ PIOCPLPERR, "PCI PIO completion FIFO parity error", -1, 1 },
-		{ PIOREQPERR, "PCI PIO request FIFO parity error", -1, 1 },
-		{ TARTAGPERR, "PCI PCI target tag FIFO parity error", -1, 1 },
-		{ CCNTPERR, "PCI CMD channel count parity error", -1, 1 },
-		{ CREQPERR, "PCI CMD channel request parity error", -1, 1 },
-		{ CRSPPERR, "PCI CMD channel response parity error", -1, 1 },
-		{ DCNTPERR, "PCI DMA channel count parity error", -1, 1 },
-		{ DREQPERR, "PCI DMA channel request parity error", -1, 1 },
-		{ DRSPPERR, "PCI DMA channel response parity error", -1, 1 },
-		{ HCNTPERR, "PCI HMA channel count parity error", -1, 1 },
-		{ HREQPERR, "PCI HMA channel request parity error", -1, 1 },
-		{ HRSPPERR, "PCI HMA channel response parity error", -1, 1 },
-		{ CFGSNPPERR, "PCI config snoop FIFO parity error", -1, 1 },
-		{ FIDPERR, "PCI FID parity error", -1, 1 },
-		{ INTXCLRPERR, "PCI INTx clear parity error", -1, 1 },
-		{ MATAGPERR, "PCI MA tag parity error", -1, 1 },
-		{ PIOTAGPERR, "PCI PIO tag parity error", -1, 1 },
-		{ RXCPLPERR, "PCI Rx completion parity error", -1, 1 },
-		{ RXWRPERR, "PCI Rx write parity error", -1, 1 },
-		{ RPLPERR, "PCI replay buffer parity error", -1, 1 },
-		{ PCIESINT, "PCI core secondary fault", -1, 1 },
-		{ PCIEPINT, "PCI core primary fault", -1, 1 },
-		{ UNXSPLCPLERR, "PCI unexpected split completion error", -1,
-		  0 },
-		{ 0, NULL, 0, 0 }
-	};
-
-	int fat;
-
-	fat = csio_handle_intr_status(hw,
-				    PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS,
-				    sysbus_intr_info) +
-	      csio_handle_intr_status(hw,
-				    PCIE_CORE_UTL_PCI_EXPRESS_PORT_STATUS,
-				    pcie_port_intr_info) +
-	      csio_handle_intr_status(hw, PCIE_INT_CAUSE, pcie_intr_info);
-	if (fat)
-		csio_hw_fatal_err(hw);
-}
-
-/*
  * TP interrupt handler.
  */
 static void csio_tp_intr_handler(struct csio_hw *hw)
@@ -3517,7 +3190,7 @@ static void csio_ncsi_intr_handler(struct csio_hw *hw)
  */
 static void csio_xgmac_intr_handler(struct csio_hw *hw, int port)
 {
-	uint32_t v = csio_rd_reg32(hw, PORT_REG(port, XGMAC_PORT_INT_CAUSE));
+	uint32_t v = csio_rd_reg32(hw, CSIO_MAC_INT_CAUSE_REG(hw, port));
 
 	v &= TXFIFO_PRTY_ERR | RXFIFO_PRTY_ERR;
 	if (!v)
@@ -3527,7 +3200,7 @@ static void csio_xgmac_intr_handler(struct csio_hw *hw, int port)
 		csio_fatal(hw, "XGMAC %d Tx FIFO parity error\n", port);
 	if (v & RXFIFO_PRTY_ERR)
 		csio_fatal(hw, "XGMAC %d Rx FIFO parity error\n", port);
-	csio_wr_reg32(hw, v, PORT_REG(port, XGMAC_PORT_INT_CAUSE));
+	csio_wr_reg32(hw, v, CSIO_MAC_INT_CAUSE_REG(hw, port));
 	csio_hw_fatal_err(hw);
 }
 
@@ -3596,7 +3269,7 @@ csio_hw_slow_intr_handler(struct csio_hw *hw)
 		csio_xgmac_intr_handler(hw, 3);
 
 	if (cause & PCIE)
-		csio_pcie_intr_handler(hw);
+		hw->chip_ops->chip_pcie_intr_handler(hw);
 
 	if (cause & MC)
 		csio_mem_intr_handler(hw, MEM_MC);
@@ -4257,6 +3930,7 @@ csio_hw_get_device_id(struct csio_hw *hw)
 			     &hw->params.pci.device_id);
 
 	csio_dev_id_cached(hw);
+	hw->chip_id = (hw->params.pci.device_id & CSIO_HW_CHIP_MASK);
 
 } /* csio_hw_get_device_id */
 
@@ -4275,19 +3949,21 @@ csio_hw_set_description(struct csio_hw *hw, uint16_t ven_id, uint16_t dev_id)
 		prot_type = (dev_id & CSIO_ASIC_DEVID_PROTO_MASK);
 		adap_type = (dev_id & CSIO_ASIC_DEVID_TYPE_MASK);
 
-		if (prot_type == CSIO_FPGA) {
+		if (prot_type == CSIO_T4_FCOE_ASIC) {
+			memcpy(hw->hw_ver,
+			       csio_t4_fcoe_adapters[adap_type].model_no, 16);
 			memcpy(hw->model_desc,
-				csio_fcoe_adapters[13].description, 32);
-		} else if (prot_type == CSIO_T4_FCOE_ASIC) {
+			       csio_t4_fcoe_adapters[adap_type].description,
+			       32);
+		} else if (prot_type == CSIO_T5_FCOE_ASIC) {
 			memcpy(hw->hw_ver,
-			       csio_fcoe_adapters[adap_type].model_no, 16);
+			       csio_t5_fcoe_adapters[adap_type].model_no, 16);
 			memcpy(hw->model_desc,
-				csio_fcoe_adapters[adap_type].description, 32);
+			       csio_t5_fcoe_adapters[adap_type].description,
+			       32);
 		} else {
 			char tempName[32] = "Chelsio FCoE Controller";
 			memcpy(hw->model_desc, tempName, 32);
-
-			CSIO_DB_ASSERT(0);
 		}
 	}
 } /* csio_hw_set_description */
@@ -4316,6 +3992,9 @@ csio_hw_init(struct csio_hw *hw)
 
 	strcpy(hw->name, CSIO_HW_NAME);
 
+	/* Initialize the HW chip ops with T4/T5 specific ops */
+	hw->chip_ops = csio_is_t4(hw->chip_id) ? &t4_ops : &t5_ops;
+
 	/* Set the model & its description */
 
 	ven_id = hw->params.pci.vendor_id;