summaryrefslogtreecommitdiffstats
path: root/drivers/regulator
diff options
context:
space:
mode:
authorThiago Farina <tfransosi@gmail.com>2013-02-23 00:52:35 -0300
committerMark Brown <broonie@opensource.wolfsonmicro.com>2013-03-04 10:53:01 +0800
commit9df19a5597f70e8fd15c065035f5b6362fec91a5 (patch)
treef206611533a0b206e7d6177b63a1c07f7c6a6e63 /drivers/regulator
parent6dbe51c251a327e012439c4772097a13df43c5b8 (diff)
downloadblackbird-op-linux-9df19a5597f70e8fd15c065035f5b6362fec91a5.tar.gz
blackbird-op-linux-9df19a5597f70e8fd15c065035f5b6362fec91a5.zip
regulators: max8998.c: use dev_err() instead of printk()
Fixes the following checkpatch warning: WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by: Thiago Farina <tfarina@chromium.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Diffstat (limited to 'drivers/regulator')
-rw-r--r--drivers/regulator/max8998.c9
1 files changed, 6 insertions, 3 deletions
diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c
index b588f07c7cad..a57a1b15cdba 100644
--- a/drivers/regulator/max8998.c
+++ b/drivers/regulator/max8998.c
@@ -665,14 +665,16 @@ static int max8998_pmic_probe(struct platform_device *pdev)
gpio_is_valid(pdata->buck1_set2)) {
/* Check if SET1 is not equal to 0 */
if (!pdata->buck1_set1) {
- printk(KERN_ERR "MAX8998 SET1 GPIO defined as 0 !\n");
+ dev_err(&pdev->dev,
+ "MAX8998 SET1 GPIO defined as 0 !\n");
WARN_ON(!pdata->buck1_set1);
ret = -EIO;
goto err_out;
}
/* Check if SET2 is not equal to 0 */
if (!pdata->buck1_set2) {
- printk(KERN_ERR "MAX8998 SET2 GPIO defined as 0 !\n");
+ dev_err(&pdev->dev,
+ "MAX8998 SET2 GPIO defined as 0 !\n");
WARN_ON(!pdata->buck1_set2);
ret = -EIO;
goto err_out;
@@ -738,7 +740,8 @@ static int max8998_pmic_probe(struct platform_device *pdev)
if (gpio_is_valid(pdata->buck2_set3)) {
/* Check if SET3 is not equal to 0 */
if (!pdata->buck2_set3) {
- printk(KERN_ERR "MAX8998 SET3 GPIO defined as 0 !\n");
+ dev_err(&pdev->dev,
+ "MAX8998 SET3 GPIO defined as 0 !\n");
WARN_ON(!pdata->buck2_set3);
ret = -EIO;
goto err_out;
OpenPOWER on IntegriCloud