diff options
author | Andrew F. Davis <afd@ti.com> | 2017-02-10 11:55:47 -0600 |
---|---|---|
committer | Mark Brown <broonie@kernel.org> | 2017-02-13 18:04:28 +0000 |
commit | 6308f1787fb85bc98b7241a08a9f7f33b47f8b61 (patch) | |
tree | 134f79980969a53fa0b89b67d13e08cb68760de5 /drivers/regulator | |
parent | 1c47f7c316de38c30b481e1886cc6352c9efdcc1 (diff) | |
download | blackbird-op-linux-6308f1787fb85bc98b7241a08a9f7f33b47f8b61.tar.gz blackbird-op-linux-6308f1787fb85bc98b7241a08a9f7f33b47f8b61.zip |
regulator: tps65086: Fix DT node referencing in of_parse_cb
When we check for additional DT properties in the current node we
use the device_node passed in with the configuration data, this
will not point to the correct DT node, use the one passed in
for this purpose.
Fixes: d2a2e729a666 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC")
Reported-by: Steven Kipisz <s-kipisz2@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Tested-by: Steven Kipisz <s-kipisz2@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/regulator')
-rw-r--r-- | drivers/regulator/tps65086-regulator.c | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/drivers/regulator/tps65086-regulator.c b/drivers/regulator/tps65086-regulator.c index 84e8cb109269..45e96e154690 100644 --- a/drivers/regulator/tps65086-regulator.c +++ b/drivers/regulator/tps65086-regulator.c @@ -162,14 +162,14 @@ static struct tps65086_regulator regulators[] = { TPS65086_SWITCH("VTT", "vtt", VTT, TPS65086_SWVTT_EN, BIT(4)), }; -static int tps65086_of_parse_cb(struct device_node *dev, +static int tps65086_of_parse_cb(struct device_node *node, const struct regulator_desc *desc, struct regulator_config *config) { int ret; /* Check for 25mV step mode */ - if (of_property_read_bool(config->of_node, "ti,regulator-step-size-25mv")) { + if (of_property_read_bool(node, "ti,regulator-step-size-25mv")) { switch (desc->id) { case BUCK1: case BUCK2: @@ -193,7 +193,7 @@ static int tps65086_of_parse_cb(struct device_node *dev, } /* Check for decay mode */ - if (desc->id <= BUCK6 && of_property_read_bool(config->of_node, "ti,regulator-decay")) { + if (desc->id <= BUCK6 && of_property_read_bool(node, "ti,regulator-decay")) { ret = regmap_write_bits(config->regmap, regulators[desc->id].decay_reg, regulators[desc->id].decay_mask, |