summaryrefslogtreecommitdiffstats
path: root/drivers/phy/renesas
diff options
context:
space:
mode:
authorYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>2018-09-21 20:53:20 +0900
committerKishon Vijay Abraham I <kishon@ti.com>2018-09-25 16:10:10 +0530
commit8dde0008ffc9e2e214ef916821959fe6706ff9f0 (patch)
tree316da8835b3aa0aec1c5f32177fa99ac60411c45 /drivers/phy/renesas
parentcfdc66348eed22211f277c4bd668ac935b8b3470 (diff)
downloadblackbird-op-linux-8dde0008ffc9e2e214ef916821959fe6706ff9f0.tar.gz
blackbird-op-linux-8dde0008ffc9e2e214ef916821959fe6706ff9f0.zip
phy: renesas: rcar-gen3-usb2: Check a property to use otg pins
Since All R-Car Gen3 SoCs have dedicated otg pins actually but some boards don't use the otg pins (e.g. R-Car D3 Draak and R-Car E3 Ebisu), the driver should not choose SoC model base by using rcar_gen3_phy_usb2_match_table's data. So, this patch checks a "renesas,no-otg-pins" property to set the "uses_otg_pins". Note that since r8a77995-draak.dts and r8a77990-ebisu.dts don't have 'dr_mode = "otg";' for now, if we apply this patch, no behavior changes (the value of "uses_otg_pins" is false). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Diffstat (limited to 'drivers/phy/renesas')
-rw-r--r--drivers/phy/renesas/phy-rcar-gen3-usb2.c24
1 files changed, 6 insertions, 18 deletions
diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
index d69317ea95c9..856056e14b26 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -78,8 +78,6 @@
#define USB2_ADPCTRL_IDPULLUP BIT(5) /* 1 = ID sampling is enabled */
#define USB2_ADPCTRL_DRVVBUS BIT(4)
-#define RCAR_GEN3_PHY_HAS_DEDICATED_PINS 1
-
struct rcar_gen3_chan {
void __iomem *base;
struct extcon_dev *extcon;
@@ -385,21 +383,10 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
}
static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
- {
- .compatible = "renesas,usb2-phy-r8a7795",
- .data = (void *)RCAR_GEN3_PHY_HAS_DEDICATED_PINS,
- },
- {
- .compatible = "renesas,usb2-phy-r8a7796",
- .data = (void *)RCAR_GEN3_PHY_HAS_DEDICATED_PINS,
- },
- {
- .compatible = "renesas,usb2-phy-r8a77965",
- .data = (void *)RCAR_GEN3_PHY_HAS_DEDICATED_PINS,
- },
- {
- .compatible = "renesas,rcar-gen3-usb2-phy",
- },
+ { .compatible = "renesas,usb2-phy-r8a7795" },
+ { .compatible = "renesas,usb2-phy-r8a7796" },
+ { .compatible = "renesas,usb2-phy-r8a77965" },
+ { .compatible = "renesas,rcar-gen3-usb2-phy" },
{ }
};
MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb2_match_table);
@@ -445,7 +432,8 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
if (of_usb_get_dr_mode_by_phy(dev->of_node, 0) == USB_DR_MODE_OTG) {
int ret;
- channel->uses_otg_pins = (uintptr_t)of_device_get_match_data(dev);
+ channel->uses_otg_pins = !of_property_read_bool(dev->of_node,
+ "renesas,no-otg-pins");
channel->extcon = devm_extcon_dev_allocate(dev,
rcar_gen3_phy_cable);
if (IS_ERR(channel->extcon))
OpenPOWER on IntegriCloud