net: fec: reset fep link status in suspend function

On some i.MX6 serial boards, phy power and refrence clock are supplied
or controlled by SOC. When do suspend/resume test, the power and clock
are disabled, so phy device link down.

For current driver, fep->link is still up status, which cause extra operation
like below code. To avoid the dumy operation, we set fep->link to down when
phy device is real down.
...
if (fep->link) {
	napi_disable(&fep->napi);
	netif_tx_lock_bh(ndev);
	fec_stop(ndev);
	netif_tx_unlock_bh(ndev);
	napi_enable(&fep->napi);
	fep->link = phy_dev->link;
	status_change = 1;
}
...

Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 6 insertions, 0 deletions

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index fee2afe47eb3..b118b7da3466 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -3332,6 +3332,12 @@ static int __maybe_unused fec_suspend(struct device *dev)
 	if (fep->reg_phy)
 		regulator_disable(fep->reg_phy);
 
+	/* SOC supply clock to phy, when clock is disabled, phy link down
+	 * SOC control phy regulator, when regulator is disabled, phy link down
+	 */
+	if (fep->clk_enet_out || fep->reg_phy)
+		fep->link = 0;
+
 	return 0;
 }