libertas SDIO: convert to asynchronous firmware loading

Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 121 insertions, 85 deletions

diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index 6590febb366b..76caebaa4397 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -117,6 +117,8 @@ struct if_sdio_card {
 	int			model;
 	unsigned long		ioport;
 	unsigned int		scratch_reg;
+	bool			started;
+	wait_queue_head_t	pwron_waitq;
 
 	u8			buffer[65536] __attribute__((aligned(4)));
 
@@ -129,6 +131,9 @@ struct if_sdio_card {
 	u8			rx_unit;
 };
 
+static void if_sdio_finish_power_on(struct if_sdio_card *card);
+static int if_sdio_power_off(struct if_sdio_card *card);
+
 /********************************************************************/
 /* I/O                                                              */
 /********************************************************************/
@@ -669,12 +674,39 @@ out:
 	return ret;
 }
 
+static void if_sdio_do_prog_firmware(struct lbs_private *priv, int ret,
+				     const struct firmware *helper,
+				     const struct firmware *mainfw)
+{
+	struct if_sdio_card *card = priv->card;
+
+	if (ret) {
+		pr_err("failed to find firmware (%d)\n", ret);
+		return;
+	}
+
+	ret = if_sdio_prog_helper(card, helper);
+	if (ret)
+		goto out;
+
+	lbs_deb_sdio("Helper firmware loaded\n");
+
+	ret = if_sdio_prog_real(card, mainfw);
+	if (ret)
+		goto out;
+
+	lbs_deb_sdio("Firmware loaded\n");
+	if_sdio_finish_power_on(card);
+
+out:
+	release_firmware(helper);
+	release_firmware(mainfw);
+}
+
 static int if_sdio_prog_firmware(struct if_sdio_card *card)
 {
 	int ret;
 	u16 scratch;
-	const struct firmware *helper = NULL;
-	const struct firmware *mainfw = NULL;
 
 	lbs_deb_enter(LBS_DEB_SDIO);
 
@@ -708,41 +740,18 @@ static int if_sdio_prog_firmware(struct if_sdio_card *card)
 	 */
 	if (scratch == IF_SDIO_FIRMWARE_OK) {
 		lbs_deb_sdio("firmware already loaded\n");
-		goto success;
+		if_sdio_finish_power_on(card);
+		return 0;
 	} else if ((card->model == MODEL_8686) && (scratch & 0x7fff)) {
 		lbs_deb_sdio("firmware may be running\n");
-		goto success;
-	}
-
-	ret = lbs_get_firmware(&card->func->dev, card->model, &fw_table[0],
-				&helper, &mainfw);
-	if (ret) {
-		pr_err("failed to find firmware (%d)\n", ret);
-		goto out;
+		if_sdio_finish_power_on(card);
+		return 0;
 	}
 
-	ret = if_sdio_prog_helper(card, helper);
-	if (ret)
-		goto out;
-
-	lbs_deb_sdio("Helper firmware loaded\n");
-
-	ret = if_sdio_prog_real(card, mainfw);
-	if (ret)
-		goto out;
-
-	lbs_deb_sdio("Firmware loaded\n");
-
-success:
-	sdio_claim_host(card->func);
-	sdio_set_block_size(card->func, IF_SDIO_BLOCK_SIZE);
-	sdio_release_host(card->func);
-	ret = 0;
+	ret = lbs_get_firmware_async(card->priv, &card->func->dev, card->model,
+				     fw_table, if_sdio_do_prog_firmware);
 
 out:
-	release_firmware(helper);
-	release_firmware(mainfw);
-
 	lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
 	return ret;
 }
@@ -751,55 +760,15 @@ out:
 /* Power management                                                 */
 /********************************************************************/
 
-static int if_sdio_power_on(struct if_sdio_card *card)
+/* Finish power on sequence (after firmware is loaded) */
+static void if_sdio_finish_power_on(struct if_sdio_card *card)
 {
 	struct sdio_func *func = card->func;
 	struct lbs_private *priv = card->priv;
-	struct mmc_host *host = func->card->host;
 	int ret;
 
 	sdio_claim_host(func);
-
-	ret = sdio_enable_func(func);
-	if (ret)
-		goto release;
-
-	/* For 1-bit transfers to the 8686 model, we need to enable the
-	 * interrupt flag in the CCCR register. Set the MMC_QUIRK_LENIENT_FN0
-	 * bit to allow access to non-vendor registers. */
-	if ((card->model == MODEL_8686) &&
-	    (host->caps & MMC_CAP_SDIO_IRQ) &&
-	    (host->ios.bus_width == MMC_BUS_WIDTH_1)) {
-		u8 reg;
-
-		func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
-		reg = sdio_f0_readb(func, SDIO_CCCR_IF, &ret);
-		if (ret)
-			goto disable;
-
-		reg |= SDIO_BUS_ECSI;
-		sdio_f0_writeb(func, reg, SDIO_CCCR_IF, &ret);
-		if (ret)
-			goto disable;
-	}
-
-	card->ioport = sdio_readb(func, IF_SDIO_IOPORT, &ret);
-	if (ret)
-		goto disable;
-
-	card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 1, &ret) << 8;
-	if (ret)
-		goto disable;
-
-	card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 2, &ret) << 16;
-	if (ret)
-		goto disable;
-
-	sdio_release_host(func);
-	ret = if_sdio_prog_firmware(card);
-	sdio_claim_host(func);
-	if (ret)
-		goto disable;
+	sdio_set_block_size(card->func, IF_SDIO_BLOCK_SIZE);
 
 	/*
 	 * Get rx_unit if the chip is SD8688 or newer.
@@ -824,7 +793,7 @@ static int if_sdio_power_on(struct if_sdio_card *card)
 	 */
 	ret = sdio_claim_irq(func, if_sdio_interrupt);
 	if (ret)
-		goto disable;
+		goto release;
 
 	/*
 	 * Enable interrupts now that everything is set up
@@ -850,11 +819,79 @@ static int if_sdio_power_on(struct if_sdio_card *card)
 	}
 
 	priv->fw_ready = 1;
+	wake_up(&card->pwron_waitq);
 
-	return 0;
+	if (!card->started) {
+		ret = lbs_start_card(priv);
+		if_sdio_power_off(card);
+		if (ret == 0) {
+			card->started = true;
+			/* Tell PM core that we don't need the card to be
+			 * powered now */
+			pm_runtime_put_noidle(&func->dev);
+		}
+	}
+
+	return;
 
 release_irq:
 	sdio_release_irq(func);
+release:
+	sdio_release_host(func);
+}
+
+static int if_sdio_power_on(struct if_sdio_card *card)
+{
+	struct sdio_func *func = card->func;
+	struct mmc_host *host = func->card->host;
+	int ret;
+
+	sdio_claim_host(func);
+
+	ret = sdio_enable_func(func);
+	if (ret)
+		goto release;
+
+	/* For 1-bit transfers to the 8686 model, we need to enable the
+	 * interrupt flag in the CCCR register. Set the MMC_QUIRK_LENIENT_FN0
+	 * bit to allow access to non-vendor registers. */
+	if ((card->model == MODEL_8686) &&
+	    (host->caps & MMC_CAP_SDIO_IRQ) &&
+	    (host->ios.bus_width == MMC_BUS_WIDTH_1)) {
+		u8 reg;
+
+		func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
+		reg = sdio_f0_readb(func, SDIO_CCCR_IF, &ret);
+		if (ret)
+			goto disable;
+
+		reg |= SDIO_BUS_ECSI;
+		sdio_f0_writeb(func, reg, SDIO_CCCR_IF, &ret);
+		if (ret)
+			goto disable;
+	}
+
+	card->ioport = sdio_readb(func, IF_SDIO_IOPORT, &ret);
+	if (ret)
+		goto disable;
+
+	card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 1, &ret) << 8;
+	if (ret)
+		goto disable;
+
+	card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 2, &ret) << 16;
+	if (ret)
+		goto disable;
+
+	sdio_release_host(func);
+	ret = if_sdio_prog_firmware(card);
+	if (ret) {
+		sdio_disable_func(func);
+		return ret;
+	}
+
+	return 0;
+
 disable:
 	sdio_disable_func(func);
 release:
@@ -1061,11 +1098,17 @@ static int if_sdio_power_save(struct lbs_private *priv)
 static int if_sdio_power_restore(struct lbs_private *priv)
 {
 	struct if_sdio_card *card = priv->card;
+	int r;
 
 	/* Make sure the card will not be powered off by runtime PM */
 	pm_runtime_get_sync(&card->func->dev);
 
-	return if_sdio_power_on(card);
+	r = if_sdio_power_on(card);
+	if (r)
+		return r;
+
+	wait_event(card->pwron_waitq, priv->fw_ready);
+	return 0;
 }
 
 
@@ -1166,6 +1209,7 @@ static int if_sdio_probe(struct sdio_func *func,
 	spin_lock_init(&card->lock);
 	card->workqueue = create_workqueue("libertas_sdio");
 	INIT_WORK(&card->packet_worker, if_sdio_host_to_card_worker);
+	init_waitqueue_head(&card->pwron_waitq);
 
 	/* Check if we support this card */
 	for (i = 0; i < ARRAY_SIZE(fw_table); i++) {
@@ -1207,14 +1251,6 @@ static int if_sdio_probe(struct sdio_func *func,
 	if (ret)
 		goto err_activate_card;
 
-	ret = lbs_start_card(priv);
-	if_sdio_power_off(card);
-	if (ret)
-		goto err_activate_card;
-
-	/* Tell PM core that we don't need the card to be powered now */
-	pm_runtime_put_noidle(&func->dev);
-
 out:
 	lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);