wlcore: split wl12xx/wl18xx sg parameters

Align to new wl18xx sg parameters.
This requires to split both wl12xx/wl18xx enumerators.

Signed-off-by: Guy Mishol <guym@ti.com>
Acked-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

3 files changed, 6 insertions, 237 deletions

diff --git a/drivers/net/wireless/ti/wlcore/acx.c b/drivers/net/wireless/ti/wlcore/acx.c
index f28fa3b5029d..26cc23f32241 100644
--- a/drivers/net/wireless/ti/wlcore/acx.c
+++ b/drivers/net/wireless/ti/wlcore/acx.c
@@ -534,9 +534,9 @@ int wl12xx_acx_sg_cfg(struct wl1271 *wl)
 	}
 
 	/* BT-WLAN coext parameters */
-	for (i = 0; i < CONF_SG_PARAMS_MAX; i++)
+	for (i = 0; i < WLCORE_CONF_SG_PARAMS_MAX; i++)
 		param->params[i] = cpu_to_le32(c->params[i]);
-	param->param_idx = CONF_SG_PARAMS_ALL;
+	param->param_idx = WLCORE_CONF_SG_PARAMS_ALL;
 
 	ret = wl1271_cmd_configure(wl, ACX_SG_CFG, param, sizeof(*param));
 	if (ret < 0) {
diff --git a/drivers/net/wireless/ti/wlcore/acx.h b/drivers/net/wireless/ti/wlcore/acx.h
index 954d57ec98f4..0d61fae88dcb 100644
--- a/drivers/net/wireless/ti/wlcore/acx.h
+++ b/drivers/net/wireless/ti/wlcore/acx.h
@@ -300,7 +300,7 @@ struct acx_bt_wlan_coex {
 struct acx_bt_wlan_coex_param {
 	struct acx_header header;
 
-	__le32 params[CONF_SG_PARAMS_MAX];
+	__le32 params[WLCORE_CONF_SG_PARAMS_MAX];
 	u8 param_idx;
 	u8 padding[3];
 } __packed;
diff --git a/drivers/net/wireless/ti/wlcore/conf.h b/drivers/net/wireless/ti/wlcore/conf.h
index 52a9d1b14020..44d898fe0afc 100644
--- a/drivers/net/wireless/ti/wlcore/conf.h
+++ b/drivers/net/wireless/ti/wlcore/conf.h
@@ -110,242 +110,11 @@ enum {
 	CONF_SG_OPPORTUNISTIC
 };
 
-enum {
-	/*
-	 * Configure the min and max time BT gains the antenna
-	 * in WLAN / BT master basic rate
-	 *
-	 * Range: 0 - 255 (ms)
-	 */
-	CONF_SG_ACL_BT_MASTER_MIN_BR = 0,
-	CONF_SG_ACL_BT_MASTER_MAX_BR,
-
-	/*
-	 * Configure the min and max time BT gains the antenna
-	 * in WLAN / BT slave basic rate
-	 *
-	 * Range: 0 - 255 (ms)
-	 */
-	CONF_SG_ACL_BT_SLAVE_MIN_BR,
-	CONF_SG_ACL_BT_SLAVE_MAX_BR,
-
-	/*
-	 * Configure the min and max time BT gains the antenna
-	 * in WLAN / BT master EDR
-	 *
-	 * Range: 0 - 255 (ms)
-	 */
-	CONF_SG_ACL_BT_MASTER_MIN_EDR,
-	CONF_SG_ACL_BT_MASTER_MAX_EDR,
-
-	/*
-	 * Configure the min and max time BT gains the antenna
-	 * in WLAN / BT slave EDR
-	 *
-	 * Range: 0 - 255 (ms)
-	 */
-	CONF_SG_ACL_BT_SLAVE_MIN_EDR,
-	CONF_SG_ACL_BT_SLAVE_MAX_EDR,
-
-	/*
-	 * The maximum time WLAN can gain the antenna
-	 * in WLAN PSM / BT master/slave BR
-	 *
-	 * Range: 0 - 255 (ms)
-	 */
-	CONF_SG_ACL_WLAN_PS_MASTER_BR,
-	CONF_SG_ACL_WLAN_PS_SLAVE_BR,
-
-	/*
-	 * The maximum time WLAN can gain the antenna
-	 * in WLAN PSM / BT master/slave EDR
-	 *
-	 * Range: 0 - 255 (ms)
-	 */
-	CONF_SG_ACL_WLAN_PS_MASTER_EDR,
-	CONF_SG_ACL_WLAN_PS_SLAVE_EDR,
-
-	/* TODO: explain these values */
-	CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR,
-	CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR,
-	CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR,
-	CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR,
-	CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR,
-	CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR,
-	CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR,
-	CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR,
-
-	CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR,
-	CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR,
-	CONF_SG_ACL_PASSIVE_SCAN_BT_BR,
-	CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR,
-	CONF_SG_ACL_PASSIVE_SCAN_BT_EDR,
-	CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR,
-
-	/*
-	 * Compensation percentage of probe requests when scan initiated
-	 * during BT voice/ACL link.
-	 *
-	 * Range: 0 - 255 (%)
-	 */
-	CONF_SG_AUTO_SCAN_PROBE_REQ,
-
-	/*
-	 * Compensation percentage of probe requests when active scan initiated
-	 * during BT voice
-	 *
-	 * Range: 0 - 255 (%)
-	 */
-	CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3,
-
-	/*
-	 * Compensation percentage of WLAN active scan window if initiated
-	 * during BT A2DP
-	 *
-	 * Range: 0 - 1000 (%)
-	 */
-	CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP,
-
-	/*
-	 * Compensation percentage of WLAN passive scan window if initiated
-	 * during BT A2DP BR
-	 *
-	 * Range: 0 - 1000 (%)
-	 */
-	CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_BR,
-
-	/*
-	 * Compensation percentage of WLAN passive scan window if initiated
-	 * during BT A2DP EDR
-	 *
-	 * Range: 0 - 1000 (%)
-	 */
-	CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_EDR,
-
-	/*
-	 * Compensation percentage of WLAN passive scan window if initiated
-	 * during BT voice
-	 *
-	 * Range: 0 - 1000 (%)
-	 */
-	CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3,
-
-	/* TODO: explain these values */
-	CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN,
-	CONF_SG_BCN_HV3_COLLISION_THRESH_IN_PASSIVE_SCAN,
-	CONF_SG_TX_RX_PROTECTION_BWIDTH_IN_PASSIVE_SCAN,
-
-	/*
-	 * Defines whether the SG will force WLAN host to enter/exit PSM
-	 *
-	 * Range: 1 - SG can force, 0 - host handles PSM
-	 */
-	CONF_SG_STA_FORCE_PS_IN_BT_SCO,
-
-	/*
-	 * Defines antenna configuration (single/dual antenna)
-	 *
-	 * Range: 0 - single antenna, 1 - dual antenna
-	 */
-	CONF_SG_ANTENNA_CONFIGURATION,
-
-	/*
-	 * The threshold (percent) of max consecutive beacon misses before
-	 * increasing priority of beacon reception.
-	 *
-	 * Range: 0 - 100 (%)
-	 */
-	CONF_SG_BEACON_MISS_PERCENT,
-
-	/*
-	 * Protection time of the DHCP procedure.
-	 *
-	 * Range: 0 - 100000 (ms)
-	 */
-	CONF_SG_DHCP_TIME,
-
-	/*
-	 * RX guard time before the beginning of a new BT voice frame during
-	 * which no new WLAN trigger frame is transmitted.
-	 *
-	 * Range: 0 - 100000 (us)
-	 */
-	CONF_SG_RXT,
-
-	/*
-	 * TX guard time before the beginning of a new BT voice frame during
-	 * which no new WLAN frame is transmitted.
-	 *
-	 * Range: 0 - 100000 (us)
-	 */
-
-	CONF_SG_TXT,
-
-	/*
-	 * Enable adaptive RXT/TXT algorithm. If disabled, the host values
-	 * will be utilized.
-	 *
-	 * Range: 0 - disable, 1 - enable
-	 */
-	CONF_SG_ADAPTIVE_RXT_TXT,
-
-	/* TODO: explain this value */
-	CONF_SG_GENERAL_USAGE_BIT_MAP,
-
-	/*
-	 * Number of consecutive BT voice frames not interrupted by WLAN
-	 *
-	 * Range: 0 - 100
-	 */
-	CONF_SG_HV3_MAX_SERVED,
-
-	/*
-	 * The used WLAN legacy service period during active BT ACL link
-	 *
-	 * Range: 0 - 255 (ms)
-	 */
-	CONF_SG_PS_POLL_TIMEOUT,
-
-	/*
-	 * The used WLAN UPSD service period during active BT ACL link
-	 *
-	 * Range: 0 - 255 (ms)
-	 */
-	CONF_SG_UPSD_TIMEOUT,
-
-	CONF_SG_CONSECUTIVE_CTS_THRESHOLD,
-	CONF_SG_STA_RX_WINDOW_AFTER_DTIM,
-	CONF_SG_STA_CONNECTION_PROTECTION_TIME,
-
-	/* AP params */
-	CONF_AP_BEACON_MISS_TX,
-	CONF_AP_RX_WINDOW_AFTER_BEACON,
-	CONF_AP_BEACON_WINDOW_INTERVAL,
-	CONF_AP_CONNECTION_PROTECTION_TIME,
-	CONF_AP_BT_ACL_VAL_BT_SERVE_TIME,
-	CONF_AP_BT_ACL_VAL_WL_SERVE_TIME,
-
-	/* CTS Diluting params */
-	CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH,
-	CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER,
-
-	CONF_SG_TEMP_PARAM_1,
-	CONF_SG_TEMP_PARAM_2,
-	CONF_SG_TEMP_PARAM_3,
-	CONF_SG_TEMP_PARAM_4,
-	CONF_SG_TEMP_PARAM_5,
-	CONF_SG_TEMP_PARAM_6,
-	CONF_SG_TEMP_PARAM_7,
-	CONF_SG_TEMP_PARAM_8,
-	CONF_SG_TEMP_PARAM_9,
-	CONF_SG_TEMP_PARAM_10,
-
-	CONF_SG_PARAMS_MAX,
-	CONF_SG_PARAMS_ALL = 0xff
-};
+#define WLCORE_CONF_SG_PARAMS_MAX 67
+#define WLCORE_CONF_SG_PARAMS_ALL 0xff
 
 struct conf_sg_settings {
-	u32 params[CONF_SG_PARAMS_MAX];
+	u32 params[WLCORE_CONF_SG_PARAMS_MAX];
 	u8 state;
 } __packed;