Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
	drivers/net/phy/bcm7xxx.c
	drivers/net/phy/marvell.c
	drivers/net/vxlan.c

All three conflicts were cases of simple overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 12 insertions, 1 deletions

diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 7f83504dfa69..cdde59089f72 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -395,6 +395,10 @@ config USB_NET_RNDIS_HOST
 	  The protocol specification is incomplete, and is controlled by
 	  (and for) Microsoft; it isn't an "Open" ecosystem or market.
 
+config USB_NET_CDC_SUBSET_ENABLE
+	tristate
+	depends on USB_NET_CDC_SUBSET
+
 config USB_NET_CDC_SUBSET
 	tristate "Simple USB Network Links (CDC Ethernet subset)"
 	depends on USB_USBNET
@@ -413,6 +417,7 @@ config USB_NET_CDC_SUBSET
 config USB_ALI_M5632
 	bool "ALi M5632 based 'USB 2.0 Data Link' cables"
 	depends on USB_NET_CDC_SUBSET
+	select USB_NET_CDC_SUBSET_ENABLE
 	help
 	  Choose this option if you're using a host-to-host cable
 	  based on this design, which supports USB 2.0 high speed.
@@ -420,6 +425,7 @@ config USB_ALI_M5632
 config USB_AN2720
 	bool "AnchorChips 2720 based cables (Xircom PGUNET, ...)"
 	depends on USB_NET_CDC_SUBSET
+	select USB_NET_CDC_SUBSET_ENABLE
 	help
 	  Choose this option if you're using a host-to-host cable
 	  based on this design.  Note that AnchorChips is now a
@@ -428,6 +434,7 @@ config USB_AN2720
 config USB_BELKIN
 	bool "eTEK based host-to-host cables (Advance, Belkin, ...)"
 	depends on USB_NET_CDC_SUBSET
+	select USB_NET_CDC_SUBSET_ENABLE
 	default y
 	help
 	  Choose this option if you're using a host-to-host cable
@@ -437,6 +444,7 @@ config USB_BELKIN
 config USB_ARMLINUX
 	bool "Embedded ARM Linux links (iPaq, ...)"
 	depends on USB_NET_CDC_SUBSET
+	select USB_NET_CDC_SUBSET_ENABLE
 	default y
 	help
 	  Choose this option to support the "usb-eth" networking driver
@@ -454,6 +462,7 @@ config USB_ARMLINUX
 config USB_EPSON2888
 	bool "Epson 2888 based firmware (DEVELOPMENT)"
 	depends on USB_NET_CDC_SUBSET
+	select USB_NET_CDC_SUBSET_ENABLE
 	help
 	  Choose this option to support the usb networking links used
 	  by some sample firmware from Epson.
@@ -461,6 +470,7 @@ config USB_EPSON2888
 config USB_KC2190
 	bool "KT Technology KC2190 based cables (InstaNet)"
 	depends on USB_NET_CDC_SUBSET
+	select USB_NET_CDC_SUBSET_ENABLE
 	help
 	  Choose this option if you're using a host-to-host cable
 	  with one of these chips.
diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile
index b5f04068dbe4..37fb46aee341 100644
--- a/drivers/net/usb/Makefile
+++ b/drivers/net/usb/Makefile
@@ -23,7 +23,7 @@ obj-$(CONFIG_USB_NET_GL620A)	+= gl620a.o
 obj-$(CONFIG_USB_NET_NET1080)	+= net1080.o
 obj-$(CONFIG_USB_NET_PLUSB)	+= plusb.o
 obj-$(CONFIG_USB_NET_RNDIS_HOST)	+= rndis_host.o
-obj-$(CONFIG_USB_NET_CDC_SUBSET)	+= cdc_subset.o
+obj-$(CONFIG_USB_NET_CDC_SUBSET_ENABLE)	+= cdc_subset.o
 obj-$(CONFIG_USB_NET_ZAURUS)	+= zaurus.o
 obj-$(CONFIG_USB_NET_MCS7830)	+= mcs7830.o
 obj-$(CONFIG_USB_USBNET)	+= usbnet.o
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 23e9880791fc..570deef53f74 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -637,6 +637,7 @@ static const struct usb_device_id products[] = {
 
 	/* 3. Combined interface devices matching on interface number */
 	{QMI_FIXED_INTF(0x0408, 0xea42, 4)},	/* Yota / Megafon M100-1 */
+	{QMI_FIXED_INTF(0x05c6, 0x6001, 3)},	/* 4G LTE usb-modem U901 */
 	{QMI_FIXED_INTF(0x05c6, 0x7000, 0)},
 	{QMI_FIXED_INTF(0x05c6, 0x7001, 1)},
 	{QMI_FIXED_INTF(0x05c6, 0x7002, 1)},