Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Add Maglev hashing scheduler to IPVS, from Inju Song.

 2) Lots of new TC subsystem tests from Roman Mashak.

 3) Add TCP zero copy receive and fix delayed acks and autotuning with
    SO_RCVLOWAT, from Eric Dumazet.

 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard
    Brouer.

 5) Add ttl inherit support to vxlan, from Hangbin Liu.

 6) Properly separate ipv6 routes into their logically independant
    components. fib6_info for the routing table, and fib6_nh for sets of
    nexthops, which thus can be shared. From David Ahern.

 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP
    messages from XDP programs. From Nikita V. Shirokov.

 8) Lots of long overdue cleanups to the r8169 driver, from Heiner
    Kallweit.

 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau.

10) Add traffic condition monitoring to iwlwifi, from Luca Coelho.

11) Plumb extack down into fib_rules, from Roopa Prabhu.

12) Add Flower classifier offload support to igb, from Vinicius Costa
    Gomes.

13) Add UDP GSO support, from Willem de Bruijn.

14) Add documentation for eBPF helpers, from Quentin Monnet.

15) Add TLS tx offload to mlx5, from Ilya Lesokhin.

16) Allow applications to be given the number of bytes available to read
    on a socket via a control message returned from recvmsg(), from
    Soheil Hassas Yeganeh.

17) Add x86_32 eBPF JIT compiler, from Wang YanQing.

18) Add AF_XDP sockets, with zerocopy support infrastructure as well.
    From Björn Töpel.

19) Remove indirect load support from all of the BPF JITs and handle
    these operations in the verifier by translating them into native BPF
    instead. From Daniel Borkmann.

20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha.

21) Allow XDP programs to do lookups in the main kernel routing tables
    for forwarding. From David Ahern.

22) Allow drivers to store hardware state into an ELF section of kernel
    dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy.

23) Various RACK and loss detection improvements in TCP, from Yuchung
    Cheng.

24) Add TCP SACK compression, from Eric Dumazet.

25) Add User Mode Helper support and basic bpfilter infrastructure, from
    Alexei Starovoitov.

26) Support ports and protocol values in RTM_GETROUTE, from Roopa
    Prabhu.

27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard
    Brouer.

28) Add lots of forwarding selftests, from Petr Machata.

29) Add generic network device failover driver, from Sridhar Samudrala.

* ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits)
  strparser: Add __strp_unpause and use it in ktls.
  rxrpc: Fix terminal retransmission connection ID to include the channel
  net: hns3: Optimize PF CMDQ interrupt switching process
  net: hns3: Fix for VF mailbox receiving unknown message
  net: hns3: Fix for VF mailbox cannot receiving PF response
  bnx2x: use the right constant
  Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
  net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
  enic: fix UDP rss bits
  netdev-FAQ: clarify DaveM's position for stable backports
  rtnetlink: validate attributes in do_setlink()
  mlxsw: Add extack messages for port_{un, }split failures
  netdevsim: Add extack error message for devlink reload
  devlink: Add extack to reload and port_{un, }split operations
  net: metrics: add proper netlink validation
  ipmr: fix error path when ipmr_new_table fails
  ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
  net: hns3: remove unused hclgevf_cfg_func_mta_filter
  netfilter: provide udp*_lib_lookup for nf_tproxy
  qed*: Utilize FW 8.37.2.0
  ...

1 files changed, 170 insertions, 51 deletions

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index a3fa65b1ca8e..2e6e2a96b4f2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -42,17 +42,27 @@
  *				This value is used for disabling properly EMAC
  *				and used as a good starting value in case of the
  *				boot process(uboot) leave some stuff.
+ * @syscon_field		reg_field for the syscon's gmac register
  * @soc_has_internal_phy:	Does the MAC embed an internal PHY
  * @support_mii:		Does the MAC handle MII
  * @support_rmii:		Does the MAC handle RMII
  * @support_rgmii:		Does the MAC handle RGMII
+ *
+ * @rx_delay_max:		Maximum raw value for RX delay chain
+ * @tx_delay_max:		Maximum raw value for TX delay chain
+ *				These two also indicate the bitmask for
+ *				the RX and TX delay chain registers. A
+ *				value of zero indicates this is not supported.
  */
 struct emac_variant {
 	u32 default_syscon_value;
+	const struct reg_field *syscon_field;
 	bool soc_has_internal_phy;
 	bool support_mii;
 	bool support_rmii;
 	bool support_rgmii;
+	u8 rx_delay_max;
+	u8 tx_delay_max;
 };
 
 /* struct sunxi_priv_data - hold all sunxi private data
@@ -71,38 +81,70 @@ struct sunxi_priv_data {
 	struct regulator *regulator;
 	struct reset_control *rst_ephy;
 	const struct emac_variant *variant;
-	struct regmap *regmap;
+	struct regmap_field *regmap_field;
 	bool internal_phy_powered;
 	void *mux_handle;
 };
 
+/* EMAC clock register @ 0x30 in the "system control" address range */
+static const struct reg_field sun8i_syscon_reg_field = {
+	.reg = 0x30,
+	.lsb = 0,
+	.msb = 31,
+};
+
+/* EMAC clock register @ 0x164 in the CCU address range */
+static const struct reg_field sun8i_ccu_reg_field = {
+	.reg = 0x164,
+	.lsb = 0,
+	.msb = 31,
+};
+
 static const struct emac_variant emac_variant_h3 = {
 	.default_syscon_value = 0x58000,
+	.syscon_field = &sun8i_syscon_reg_field,
 	.soc_has_internal_phy = true,
 	.support_mii = true,
 	.support_rmii = true,
-	.support_rgmii = true
+	.support_rgmii = true,
+	.rx_delay_max = 31,
+	.tx_delay_max = 7,
 };
 
 static const struct emac_variant emac_variant_v3s = {
 	.default_syscon_value = 0x38000,
+	.syscon_field = &sun8i_syscon_reg_field,
 	.soc_has_internal_phy = true,
 	.support_mii = true
 };
 
 static const struct emac_variant emac_variant_a83t = {
 	.default_syscon_value = 0,
+	.syscon_field = &sun8i_syscon_reg_field,
 	.soc_has_internal_phy = false,
 	.support_mii = true,
-	.support_rgmii = true
+	.support_rgmii = true,
+	.rx_delay_max = 31,
+	.tx_delay_max = 7,
+};
+
+static const struct emac_variant emac_variant_r40 = {
+	.default_syscon_value = 0,
+	.syscon_field = &sun8i_ccu_reg_field,
+	.support_mii = true,
+	.support_rgmii = true,
+	.rx_delay_max = 7,
 };
 
 static const struct emac_variant emac_variant_a64 = {
 	.default_syscon_value = 0,
+	.syscon_field = &sun8i_syscon_reg_field,
 	.soc_has_internal_phy = false,
 	.support_mii = true,
 	.support_rmii = true,
-	.support_rgmii = true
+	.support_rgmii = true,
+	.rx_delay_max = 31,
+	.tx_delay_max = 7,
 };
 
 #define EMAC_BASIC_CTL0 0x00
@@ -206,9 +248,7 @@ static const struct emac_variant emac_variant_a64 = {
 #define SYSCON_RMII_EN		BIT(13) /* 1: enable RMII (overrides EPIT) */
 
 /* Generic system control EMAC_CLK bits */
-#define SYSCON_ETXDC_MASK		GENMASK(2, 0)
 #define SYSCON_ETXDC_SHIFT		10
-#define SYSCON_ERXDC_MASK		GENMASK(4, 0)
 #define SYSCON_ERXDC_SHIFT		5
 /* EMAC PHY Interface Type */
 #define SYSCON_EPIT			BIT(2) /* 1: RGMII, 0: MII */
@@ -216,7 +256,6 @@ static const struct emac_variant emac_variant_a64 = {
 #define SYSCON_ETCS_MII		0x0
 #define SYSCON_ETCS_EXT_GMII	0x1
 #define SYSCON_ETCS_INT_GMII	0x2
-#define SYSCON_EMAC_REG		0x30
 
 /* sun8i_dwmac_dma_reset() - reset the EMAC
  * Called from stmmac via stmmac_dma_ops->reset
@@ -237,17 +276,28 @@ static int sun8i_dwmac_dma_reset(void __iomem *ioaddr)
  * Called from stmmac via stmmac_dma_ops->init
  */
 static void sun8i_dwmac_dma_init(void __iomem *ioaddr,
-				 struct stmmac_dma_cfg *dma_cfg,
-				 u32 dma_tx, u32 dma_rx, int atds)
+				 struct stmmac_dma_cfg *dma_cfg, int atds)
 {
-	/* Write TX and RX descriptors address */
-	writel(dma_rx, ioaddr + EMAC_RX_DESC_LIST);
-	writel(dma_tx, ioaddr + EMAC_TX_DESC_LIST);
-
 	writel(EMAC_RX_INT | EMAC_TX_INT, ioaddr + EMAC_INT_EN);
 	writel(0x1FFFFFF, ioaddr + EMAC_INT_STA);
 }
 
+static void sun8i_dwmac_dma_init_rx(void __iomem *ioaddr,
+				    struct stmmac_dma_cfg *dma_cfg,
+				    u32 dma_rx_phy, u32 chan)
+{
+	/* Write RX descriptors address */
+	writel(dma_rx_phy, ioaddr + EMAC_RX_DESC_LIST);
+}
+
+static void sun8i_dwmac_dma_init_tx(void __iomem *ioaddr,
+				    struct stmmac_dma_cfg *dma_cfg,
+				    u32 dma_tx_phy, u32 chan)
+{
+	/* Write TX descriptors address */
+	writel(dma_tx_phy, ioaddr + EMAC_TX_DESC_LIST);
+}
+
 /* sun8i_dwmac_dump_regs() - Dump EMAC address space
  * Called from stmmac_dma_ops->dump_regs
  * Used for ethtool
@@ -398,13 +448,36 @@ static int sun8i_dwmac_dma_interrupt(void __iomem *ioaddr,
 	return ret;
 }
 
-static void sun8i_dwmac_dma_operation_mode(void __iomem *ioaddr, int txmode,
-					   int rxmode, int rxfifosz)
+static void sun8i_dwmac_dma_operation_mode_rx(void __iomem *ioaddr, int mode,
+					      u32 channel, int fifosz, u8 qmode)
+{
+	u32 v;
+
+	v = readl(ioaddr + EMAC_RX_CTL1);
+	if (mode == SF_DMA_MODE) {
+		v |= EMAC_RX_MD;
+	} else {
+		v &= ~EMAC_RX_MD;
+		v &= ~EMAC_RX_TH_MASK;
+		if (mode < 32)
+			v |= EMAC_RX_TH_32;
+		else if (mode < 64)
+			v |= EMAC_RX_TH_64;
+		else if (mode < 96)
+			v |= EMAC_RX_TH_96;
+		else if (mode < 128)
+			v |= EMAC_RX_TH_128;
+	}
+	writel(v, ioaddr + EMAC_RX_CTL1);
+}
+
+static void sun8i_dwmac_dma_operation_mode_tx(void __iomem *ioaddr, int mode,
+					      u32 channel, int fifosz, u8 qmode)
 {
 	u32 v;
 
 	v = readl(ioaddr + EMAC_TX_CTL1);
-	if (txmode == SF_DMA_MODE) {
+	if (mode == SF_DMA_MODE) {
 		v |= EMAC_TX_MD;
 		/* Undocumented bit (called TX_NEXT_FRM in BSP), the original
 		 * comment is
@@ -415,40 +488,26 @@ static void sun8i_dwmac_dma_operation_mode(void __iomem *ioaddr, int txmode,
 	} else {
 		v &= ~EMAC_TX_MD;
 		v &= ~EMAC_TX_TH_MASK;
-		if (txmode < 64)
+		if (mode < 64)
 			v |= EMAC_TX_TH_64;
-		else if (txmode < 128)
+		else if (mode < 128)
 			v |= EMAC_TX_TH_128;
-		else if (txmode < 192)
+		else if (mode < 192)
 			v |= EMAC_TX_TH_192;
-		else if (txmode < 256)
+		else if (mode < 256)
 			v |= EMAC_TX_TH_256;
 	}
 	writel(v, ioaddr + EMAC_TX_CTL1);
-
-	v = readl(ioaddr + EMAC_RX_CTL1);
-	if (rxmode == SF_DMA_MODE) {
-		v |= EMAC_RX_MD;
-	} else {
-		v &= ~EMAC_RX_MD;
-		v &= ~EMAC_RX_TH_MASK;
-		if (rxmode < 32)
-			v |= EMAC_RX_TH_32;
-		else if (rxmode < 64)
-			v |= EMAC_RX_TH_64;
-		else if (rxmode < 96)
-			v |= EMAC_RX_TH_96;
-		else if (rxmode < 128)
-			v |= EMAC_RX_TH_128;
-	}
-	writel(v, ioaddr + EMAC_RX_CTL1);
 }
 
 static const struct stmmac_dma_ops sun8i_dwmac_dma_ops = {
 	.reset = sun8i_dwmac_dma_reset,
 	.init = sun8i_dwmac_dma_init,
+	.init_rx_chan = sun8i_dwmac_dma_init_rx,
+	.init_tx_chan = sun8i_dwmac_dma_init_tx,
 	.dump_regs = sun8i_dwmac_dump_regs,
-	.dma_mode = sun8i_dwmac_dma_operation_mode,
+	.dma_rx_mode = sun8i_dwmac_dma_operation_mode_rx,
+	.dma_tx_mode = sun8i_dwmac_dma_operation_mode_tx,
 	.enable_dma_transmission = sun8i_dwmac_enable_dma_transmission,
 	.enable_dma_irq = sun8i_dwmac_enable_dma_irq,
 	.disable_dma_irq = sun8i_dwmac_disable_dma_irq,
@@ -745,7 +804,7 @@ static int mdio_mux_syscon_switch_fn(int current_child, int desired_child,
 	bool need_power_ephy = false;
 
 	if (current_child ^ desired_child) {
-		regmap_read(gmac->regmap, SYSCON_EMAC_REG, &reg);
+		regmap_field_read(gmac->regmap_field, &reg);
 		switch (desired_child) {
 		case DWMAC_SUN8I_MDIO_MUX_INTERNAL_ID:
 			dev_info(priv->device, "Switch mux to internal PHY");
@@ -763,7 +822,7 @@ static int mdio_mux_syscon_switch_fn(int current_child, int desired_child,
 				desired_child);
 			return -EINVAL;
 		}
-		regmap_write(gmac->regmap, SYSCON_EMAC_REG, val);
+		regmap_field_write(gmac->regmap_field, val);
 		if (need_power_ephy) {
 			ret = sun8i_dwmac_power_internal_phy(priv);
 			if (ret)
@@ -801,7 +860,7 @@ static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv)
 	int ret;
 	u32 reg, val;
 
-	regmap_read(gmac->regmap, SYSCON_EMAC_REG, &val);
+	regmap_field_read(gmac->regmap_field, &val);
 	reg = gmac->variant->default_syscon_value;
 	if (reg != val)
 		dev_warn(priv->device,
@@ -835,8 +894,9 @@ static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv)
 		}
 		val /= 100;
 		dev_dbg(priv->device, "set tx-delay to %x\n", val);
-		if (val <= SYSCON_ETXDC_MASK) {
-			reg &= ~(SYSCON_ETXDC_MASK << SYSCON_ETXDC_SHIFT);
+		if (val <= gmac->variant->tx_delay_max) {
+			reg &= ~(gmac->variant->tx_delay_max <<
+				 SYSCON_ETXDC_SHIFT);
 			reg |= (val << SYSCON_ETXDC_SHIFT);
 		} else {
 			dev_err(priv->device, "Invalid TX clock delay: %d\n",
@@ -852,8 +912,9 @@ static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv)
 		}
 		val /= 100;
 		dev_dbg(priv->device, "set rx-delay to %x\n", val);
-		if (val <= SYSCON_ERXDC_MASK) {
-			reg &= ~(SYSCON_ERXDC_MASK << SYSCON_ERXDC_SHIFT);
+		if (val <= gmac->variant->rx_delay_max) {
+			reg &= ~(gmac->variant->rx_delay_max <<
+				 SYSCON_ERXDC_SHIFT);
 			reg |= (val << SYSCON_ERXDC_SHIFT);
 		} else {
 			dev_err(priv->device, "Invalid RX clock delay: %d\n",
@@ -883,7 +944,7 @@ static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv)
 		return -EINVAL;
 	}
 
-	regmap_write(gmac->regmap, SYSCON_EMAC_REG, reg);
+	regmap_field_write(gmac->regmap_field, reg);
 
 	return 0;
 }
@@ -892,7 +953,7 @@ static void sun8i_dwmac_unset_syscon(struct sunxi_priv_data *gmac)
 {
 	u32 reg = gmac->variant->default_syscon_value;
 
-	regmap_write(gmac->regmap, SYSCON_EMAC_REG, reg);
+	regmap_field_write(gmac->regmap_field, reg);
 }
 
 static void sun8i_dwmac_exit(struct platform_device *pdev, void *priv)
@@ -971,6 +1032,34 @@ static struct mac_device_info *sun8i_dwmac_setup(void *ppriv)
 	return mac;
 }
 
+static struct regmap *sun8i_dwmac_get_syscon_from_dev(struct device_node *node)
+{
+	struct device_node *syscon_node;
+	struct platform_device *syscon_pdev;
+	struct regmap *regmap = NULL;
+
+	syscon_node = of_parse_phandle(node, "syscon", 0);
+	if (!syscon_node)
+		return ERR_PTR(-ENODEV);
+
+	syscon_pdev = of_find_device_by_node(syscon_node);
+	if (!syscon_pdev) {
+		/* platform device might not be probed yet */
+		regmap = ERR_PTR(-EPROBE_DEFER);
+		goto out_put_node;
+	}
+
+	/* If no regmap is found then the other device driver is at fault */
+	regmap = dev_get_regmap(&syscon_pdev->dev, NULL);
+	if (!regmap)
+		regmap = ERR_PTR(-EINVAL);
+
+	platform_device_put(syscon_pdev);
+out_put_node:
+	of_node_put(syscon_node);
+	return regmap;
+}
+
 static int sun8i_dwmac_probe(struct platform_device *pdev)
 {
 	struct plat_stmmacenet_data *plat_dat;
@@ -980,6 +1069,7 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
 	int ret;
 	struct stmmac_priv *priv;
 	struct net_device *ndev;
+	struct regmap *regmap;
 
 	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
 	if (ret)
@@ -1014,14 +1104,41 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
 		gmac->regulator = NULL;
 	}
 
-	gmac->regmap = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
-						       "syscon");
-	if (IS_ERR(gmac->regmap)) {
-		ret = PTR_ERR(gmac->regmap);
+	/* The "GMAC clock control" register might be located in the
+	 * CCU address range (on the R40), or the system control address
+	 * range (on most other sun8i and later SoCs).
+	 *
+	 * The former controls most if not all clocks in the SoC. The
+	 * latter has an SoC identification register, and on some SoCs,
+	 * controls to map device specific SRAM to either the intended
+	 * peripheral, or the CPU address space.
+	 *
+	 * In either case, there should be a coordinated and restricted
+	 * method of accessing the register needed here. This is done by
+	 * having the device export a custom regmap, instead of a generic
+	 * syscon, which grants all access to all registers.
+	 *
+	 * To support old device trees, we fall back to using the syscon
+	 * interface if possible.
+	 */
+	regmap = sun8i_dwmac_get_syscon_from_dev(pdev->dev.of_node);
+	if (IS_ERR(regmap))
+		regmap = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+							 "syscon");
+	if (IS_ERR(regmap)) {
+		ret = PTR_ERR(regmap);
 		dev_err(&pdev->dev, "Unable to map syscon: %d\n", ret);
 		return ret;
 	}
 
+	gmac->regmap_field = devm_regmap_field_alloc(dev, regmap,
+						     *gmac->variant->syscon_field);
+	if (IS_ERR(gmac->regmap_field)) {
+		ret = PTR_ERR(gmac->regmap_field);
+		dev_err(dev, "Unable to map syscon register: %d\n", ret);
+		return ret;
+	}
+
 	plat_dat->interface = of_get_phy_mode(dev->of_node);
 
 	/* platform data specifying hardware features and callbacks.
@@ -1078,6 +1195,8 @@ static const struct of_device_id sun8i_dwmac_match[] = {
 		.data = &emac_variant_v3s },
 	{ .compatible = "allwinner,sun8i-a83t-emac",
 		.data = &emac_variant_a83t },
+	{ .compatible = "allwinner,sun8i-r40-gmac",
+		.data = &emac_variant_r40 },
 	{ .compatible = "allwinner,sun50i-a64-emac",
 		.data = &emac_variant_a64 },
 	{ }