broadcom: Move the Broadcom drivers

Moves the drivers for Broadcom devices into
drivers/net/ethernet/broadcom/ and the necessary Kconfig and Makefile
changes.

CC: Eilon Greenstein <eilong@broadcom.com>
CC: Michael Chan <mchan@broadcom.com>
CC: Matt Carlson <mcarlson@broadcom.com>
CC: Gary Zambrano <zambrano@broadcom.com>
CC: "Maciej W. Rozycki" <macro@linux-mips.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 11531 insertions, 0 deletions

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
new file mode 100644
index 000000000000..150709111548
--- /dev/null
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -0,0 +1,11531 @@
+/* bnx2x_main.c: Broadcom Everest network driver.
+ *
+ * Copyright (c) 2007-2011 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Written by: Eliezer Tamir
+ * Based on code from Michael Chan's bnx2 driver
+ * UDP CSUM errata workaround by Arik Gendelman
+ * Slowpath and fastpath rework by Vladislav Zolotarov
+ * Statistics and Link management by Yitchak Gertner
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/device.h>  /* for dev_info() */
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/dma-mapping.h>
+#include <linux/bitops.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <asm/byteorder.h>
+#include <linux/time.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/if_vlan.h>
+#include <net/ip.h>
+#include <net/ipv6.h>
+#include <net/tcp.h>
+#include <net/checksum.h>
+#include <net/ip6_checksum.h>
+#include <linux/workqueue.h>
+#include <linux/crc32.h>
+#include <linux/crc32c.h>
+#include <linux/prefetch.h>
+#include <linux/zlib.h>
+#include <linux/io.h>
+#include <linux/stringify.h>
+#include <linux/vmalloc.h>
+
+#include "bnx2x.h"
+#include "bnx2x_init.h"
+#include "bnx2x_init_ops.h"
+#include "bnx2x_cmn.h"
+#include "bnx2x_dcb.h"
+#include "bnx2x_sp.h"
+
+#include <linux/firmware.h>
+#include "bnx2x_fw_file_hdr.h"
+/* FW files */
+#define FW_FILE_VERSION					\
+	__stringify(BCM_5710_FW_MAJOR_VERSION) "."	\
+	__stringify(BCM_5710_FW_MINOR_VERSION) "."	\
+	__stringify(BCM_5710_FW_REVISION_VERSION) "."	\
+	__stringify(BCM_5710_FW_ENGINEERING_VERSION)
+#define FW_FILE_NAME_E1		"bnx2x/bnx2x-e1-" FW_FILE_VERSION ".fw"
+#define FW_FILE_NAME_E1H	"bnx2x/bnx2x-e1h-" FW_FILE_VERSION ".fw"
+#define FW_FILE_NAME_E2		"bnx2x/bnx2x-e2-" FW_FILE_VERSION ".fw"
+
+/* Time in jiffies before concluding the transmitter is hung */
+#define TX_TIMEOUT		(5*HZ)
+
+static char version[] __devinitdata =
+	"Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver "
+	DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
+
+MODULE_AUTHOR("Eliezer Tamir");
+MODULE_DESCRIPTION("Broadcom NetXtreme II "
+		   "BCM57710/57711/57711E/"
+		   "57712/57712_MF/57800/57800_MF/57810/57810_MF/"
+		   "57840/57840_MF Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_MODULE_VERSION);
+MODULE_FIRMWARE(FW_FILE_NAME_E1);
+MODULE_FIRMWARE(FW_FILE_NAME_E1H);
+MODULE_FIRMWARE(FW_FILE_NAME_E2);
+
+static int multi_mode = 1;
+module_param(multi_mode, int, 0);
+MODULE_PARM_DESC(multi_mode, " Multi queue mode "
+			     "(0 Disable; 1 Enable (default))");
+
+int num_queues;
+module_param(num_queues, int, 0);
+MODULE_PARM_DESC(num_queues, " Number of queues for multi_mode=1"
+				" (default is as a number of CPUs)");
+
+static int disable_tpa;
+module_param(disable_tpa, int, 0);
+MODULE_PARM_DESC(disable_tpa, " Disable the TPA (LRO) feature");
+
+#define INT_MODE_INTx			1
+#define INT_MODE_MSI			2
+static int int_mode;
+module_param(int_mode, int, 0);
+MODULE_PARM_DESC(int_mode, " Force interrupt mode other than MSI-X "
+				"(1 INT#x; 2 MSI)");
+
+static int dropless_fc;
+module_param(dropless_fc, int, 0);
+MODULE_PARM_DESC(dropless_fc, " Pause on exhausted host ring");
+
+static int poll;
+module_param(poll, int, 0);
+MODULE_PARM_DESC(poll, " Use polling (for debug)");
+
+static int mrrs = -1;
+module_param(mrrs, int, 0);
+MODULE_PARM_DESC(mrrs, " Force Max Read Req Size (0..3) (for debug)");
+
+static int debug;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, " Default debug msglevel");
+
+
+
+struct workqueue_struct *bnx2x_wq;
+
+enum bnx2x_board_type {
+	BCM57710 = 0,
+	BCM57711,
+	BCM57711E,
+	BCM57712,
+	BCM57712_MF,
+	BCM57800,
+	BCM57800_MF,
+	BCM57810,
+	BCM57810_MF,
+	BCM57840,
+	BCM57840_MF
+};
+
+/* indexed by board_type, above */
+static struct {
+	char *name;
+} board_info[] __devinitdata = {
+	{ "Broadcom NetXtreme II BCM57710 10 Gigabit PCIe [Everest]" },
+	{ "Broadcom NetXtreme II BCM57711 10 Gigabit PCIe" },
+	{ "Broadcom NetXtreme II BCM57711E 10 Gigabit PCIe" },
+	{ "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet" },
+	{ "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet Multi Function" },
+	{ "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet" },
+	{ "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet Multi Function" },
+	{ "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet" },
+	{ "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function" },
+	{ "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet" },
+	{ "Broadcom NetXtreme II BCM57840 10/20 Gigabit "
+						"Ethernet Multi Function"}
+};
+
+#ifndef PCI_DEVICE_ID_NX2_57710
+#define PCI_DEVICE_ID_NX2_57710		CHIP_NUM_57710
+#endif
+#ifndef PCI_DEVICE_ID_NX2_57711
+#define PCI_DEVICE_ID_NX2_57711		CHIP_NUM_57711
+#endif
+#ifndef PCI_DEVICE_ID_NX2_57711E
+#define PCI_DEVICE_ID_NX2_57711E	CHIP_NUM_57711E
+#endif
+#ifndef PCI_DEVICE_ID_NX2_57712
+#define PCI_DEVICE_ID_NX2_57712		CHIP_NUM_57712
+#endif
+#ifndef PCI_DEVICE_ID_NX2_57712_MF
+#define PCI_DEVICE_ID_NX2_57712_MF	CHIP_NUM_57712_MF
+#endif
+#ifndef PCI_DEVICE_ID_NX2_57800
+#define PCI_DEVICE_ID_NX2_57800		CHIP_NUM_57800
+#endif
+#ifndef PCI_DEVICE_ID_NX2_57800_MF
+#define PCI_DEVICE_ID_NX2_57800_MF	CHIP_NUM_57800_MF
+#endif
+#ifndef PCI_DEVICE_ID_NX2_57810
+#define PCI_DEVICE_ID_NX2_57810		CHIP_NUM_57810
+#endif
+#ifndef PCI_DEVICE_ID_NX2_57810_MF
+#define PCI_DEVICE_ID_NX2_57810_MF	CHIP_NUM_57810_MF
+#endif
+#ifndef PCI_DEVICE_ID_NX2_57840
+#define PCI_DEVICE_ID_NX2_57840		CHIP_NUM_57840
+#endif
+#ifndef PCI_DEVICE_ID_NX2_57840_MF
+#define PCI_DEVICE_ID_NX2_57840_MF	CHIP_NUM_57840_MF
+#endif
+static DEFINE_PCI_DEVICE_TABLE(bnx2x_pci_tbl) = {
+	{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57710), BCM57710 },
+	{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57711), BCM57711 },
+	{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57711E), BCM57711E },
+	{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57712), BCM57712 },
+	{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57712_MF), BCM57712_MF },
+	{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57800), BCM57800 },
+	{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57800_MF), BCM57800_MF },
+	{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57810), BCM57810 },
+	{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57810_MF), BCM57810_MF },
+	{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840), BCM57840 },
+	{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_MF), BCM57840_MF },
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(pci, bnx2x_pci_tbl);
+
+/****************************************************************************
+* General service functions
+****************************************************************************/
+
+static inline void __storm_memset_dma_mapping(struct bnx2x *bp,
+				       u32 addr, dma_addr_t mapping)
+{
+	REG_WR(bp,  addr, U64_LO(mapping));
+	REG_WR(bp,  addr + 4, U64_HI(mapping));
+}
+
+static inline void storm_memset_spq_addr(struct bnx2x *bp,
+					 dma_addr_t mapping, u16 abs_fid)
+{
+	u32 addr = XSEM_REG_FAST_MEMORY +
+			XSTORM_SPQ_PAGE_BASE_OFFSET(abs_fid);
+
+	__storm_memset_dma_mapping(bp, addr, mapping);
+}
+
+static inline void storm_memset_vf_to_pf(struct bnx2x *bp, u16 abs_fid,
+					 u16 pf_id)
+{
+	REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_VF_TO_PF_OFFSET(abs_fid),
+		pf_id);
+	REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_VF_TO_PF_OFFSET(abs_fid),
+		pf_id);
+	REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_VF_TO_PF_OFFSET(abs_fid),
+		pf_id);
+	REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_VF_TO_PF_OFFSET(abs_fid),
+		pf_id);
+}
+
+static inline void storm_memset_func_en(struct bnx2x *bp, u16 abs_fid,
+					u8 enable)
+{
+	REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(abs_fid),
+		enable);
+	REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(abs_fid),
+		enable);
+	REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(abs_fid),
+		enable);
+	REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(abs_fid),
+		enable);
+}
+
+static inline void storm_memset_eq_data(struct bnx2x *bp,
+				struct event_ring_data *eq_data,
+				u16 pfid)
+{
+	size_t size = sizeof(struct event_ring_data);
+
+	u32 addr = BAR_CSTRORM_INTMEM + CSTORM_EVENT_RING_DATA_OFFSET(pfid);
+
+	__storm_memset_struct(bp, addr, size, (u32 *)eq_data);
+}
+
+static inline void storm_memset_eq_prod(struct bnx2x *bp, u16 eq_prod,
+					u16 pfid)
+{
+	u32 addr = BAR_CSTRORM_INTMEM + CSTORM_EVENT_RING_PROD_OFFSET(pfid);
+	REG_WR16(bp, addr, eq_prod);
+}
+
+/* used only at init
+ * locking is done by mcp
+ */
+static void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val)
+{
+	pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, addr);
+	pci_write_config_dword(bp->pdev, PCICFG_GRC_DATA, val);
+	pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS,
+			       PCICFG_VENDOR_ID_OFFSET);
+}
+
+static u32 bnx2x_reg_rd_ind(struct bnx2x *bp, u32 addr)
+{
+	u32 val;
+
+	pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, addr);
+	pci_read_config_dword(bp->pdev, PCICFG_GRC_DATA, &val);
+	pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS,
+			       PCICFG_VENDOR_ID_OFFSET);
+
+	return val;
+}
+
+#define DMAE_DP_SRC_GRC		"grc src_addr [%08x]"
+#define DMAE_DP_SRC_PCI		"pci src_addr [%x:%08x]"
+#define DMAE_DP_DST_GRC		"grc dst_addr [%08x]"
+#define DMAE_DP_DST_PCI		"pci dst_addr [%x:%08x]"
+#define DMAE_DP_DST_NONE	"dst_addr [none]"
+
+static void bnx2x_dp_dmae(struct bnx2x *bp, struct dmae_command *dmae,
+			  int msglvl)
+{
+	u32 src_type = dmae->opcode & DMAE_COMMAND_SRC;
+
+	switch (dmae->opcode & DMAE_COMMAND_DST) {
+	case DMAE_CMD_DST_PCI:
+		if (src_type == DMAE_CMD_SRC_PCI)
+			DP(msglvl, "DMAE: opcode 0x%08x\n"
+			   "src [%x:%08x], len [%d*4], dst [%x:%08x]\n"
+			   "comp_addr [%x:%08x], comp_val 0x%08x\n",
+			   dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo,
+			   dmae->len, dmae->dst_addr_hi, dmae->dst_addr_lo,
+			   dmae->comp_addr_hi, dmae->comp_addr_lo,
+			   dmae->comp_val);
+		else
+			DP(msglvl, "DMAE: opcode 0x%08x\n"
+			   "src [%08x], len [%d*4], dst [%x:%08x]\n"
+			   "comp_addr [%x:%08x], comp_val 0x%08x\n",
+			   dmae->opcode, dmae->src_addr_lo >> 2,
+			   dmae->len, dmae->dst_addr_hi, dmae->dst_addr_lo,
+			   dmae->comp_addr_hi, dmae->comp_addr_lo,
+			   dmae->comp_val);
+		break;
+	case DMAE_CMD_DST_GRC:
+		if (src_type == DMAE_CMD_SRC_PCI)
+			DP(msglvl, "DMAE: opcode 0x%08x\n"
+			   "src [%x:%08x], len [%d*4], dst_addr [%08x]\n"
+			   "comp_addr [%x:%08x], comp_val 0x%08x\n",
+			   dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo,
+			   dmae->len, dmae->dst_addr_lo >> 2,
+			   dmae->comp_addr_hi, dmae->comp_addr_lo,
+			   dmae->comp_val);
+		else
+			DP(msglvl, "DMAE: opcode 0x%08x\n"
+			   "src [%08x], len [%d*4], dst [%08x]\n"
+			   "comp_addr [%x:%08x], comp_val 0x%08x\n",
+			   dmae->opcode, dmae->src_addr_lo >> 2,
+			   dmae->len, dmae->dst_addr_lo >> 2,
+			   dmae->comp_addr_hi, dmae->comp_addr_lo,
+			   dmae->comp_val);
+		break;
+	default:
+		if (src_type == DMAE_CMD_SRC_PCI)
+			DP(msglvl, "DMAE: opcode 0x%08x\n"
+			   DP_LEVEL "src_addr [%x:%08x]  len [%d * 4]  "
+				    "dst_addr [none]\n"
+			   DP_LEVEL "comp_addr [%x:%08x]  comp_val 0x%08x\n",
+			   dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo,
+			   dmae->len, dmae->comp_addr_hi, dmae->comp_addr_lo,
+			   dmae->comp_val);
+		else
+			DP(msglvl, "DMAE: opcode 0x%08x\n"
+			   DP_LEVEL "src_addr [%08x]  len [%d * 4]  "
+				    "dst_addr [none]\n"
+			   DP_LEVEL "comp_addr [%x:%08x]  comp_val 0x%08x\n",
+			   dmae->opcode, dmae->src_addr_lo >> 2,
+			   dmae->len, dmae->comp_addr_hi, dmae->comp_addr_lo,
+			   dmae->comp_val);
+		break;
+	}
+
+}
+
+/* copy command into DMAE command memory and set DMAE command go */
+void bnx2x_post_dmae(struct bnx2x *bp, struct dmae_command *dmae, int idx)
+{
+	u32 cmd_offset;
+	int i;
+
+	cmd_offset = (DMAE_REG_CMD_MEM + sizeof(struct dmae_command) * idx);
+	for (i = 0; i < (sizeof(struct dmae_command)/4); i++) {
+		REG_WR(bp, cmd_offset + i*4, *(((u32 *)dmae) + i));
+
+		DP(BNX2X_MSG_OFF, "DMAE cmd[%d].%d (0x%08x) : 0x%08x\n",
+		   idx, i, cmd_offset + i*4, *(((u32 *)dmae) + i));
+	}
+	REG_WR(bp, dmae_reg_go_c[idx], 1);
+}
+
+u32 bnx2x_dmae_opcode_add_comp(u32 opcode, u8 comp_type)
+{
+	return opcode | ((comp_type << DMAE_COMMAND_C_DST_SHIFT) |
+			   DMAE_CMD_C_ENABLE);
+}
+
+u32 bnx2x_dmae_opcode_clr_src_reset(u32 opcode)
+{
+	return opcode & ~DMAE_CMD_SRC_RESET;
+}
+
+u32 bnx2x_dmae_opcode(struct bnx2x *bp, u8 src_type, u8 dst_type,
+			     bool with_comp, u8 comp_type)
+{
+	u32 opcode = 0;
+
+	opcode |= ((src_type << DMAE_COMMAND_SRC_SHIFT) |
+		   (dst_type << DMAE_COMMAND_DST_SHIFT));
+
+	opcode |= (DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET);
+
+	opcode |= (BP_PORT(bp) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0);
+	opcode |= ((BP_E1HVN(bp) << DMAE_CMD_E1HVN_SHIFT) |
+		   (BP_E1HVN(bp) << DMAE_COMMAND_DST_VN_SHIFT));
+	opcode |= (DMAE_COM_SET_ERR << DMAE_COMMAND_ERR_POLICY_SHIFT);
+
+#ifdef __BIG_ENDIAN
+	opcode |= DMAE_CMD_ENDIANITY_B_DW_SWAP;
+#else
+	opcode |= DMAE_CMD_ENDIANITY_DW_SWAP;
+#endif
+	if (with_comp)
+		opcode = bnx2x_dmae_opcode_add_comp(opcode, comp_type);
+	return opcode;
+}
+
+static void bnx2x_prep_dmae_with_comp(struct bnx2x *bp,
+				      struct dmae_command *dmae,
+				      u8 src_type, u8 dst_type)
+{
+	memset(dmae, 0, sizeof(struct dmae_command));
+
+	/* set the opcode */
+	dmae->opcode = bnx2x_dmae_opcode(bp, src_type, dst_type,
+					 true, DMAE_COMP_PCI);
+
+	/* fill in the completion parameters */
+	dmae->comp_addr_lo = U64_LO(bnx2x_sp_mapping(bp, wb_comp));
+	dmae->comp_addr_hi = U64_HI(bnx2x_sp_mapping(bp, wb_comp));
+	dmae->comp_val = DMAE_COMP_VAL;
+}
+
+/* issue a dmae command over the init-channel and wailt for completion */
+static int bnx2x_issue_dmae_with_comp(struct bnx2x *bp,
+				      struct dmae_command *dmae)
+{
+	u32 *wb_comp = bnx2x_sp(bp, wb_comp);
+	int cnt = CHIP_REV_IS_SLOW(bp) ? (400000) : 4000;
+	int rc = 0;
+
+	DP(BNX2X_MSG_OFF, "data before [0x%08x 0x%08x 0x%08x 0x%08x]\n",
+	   bp->slowpath->wb_data[0], bp->slowpath->wb_data[1],
+	   bp->slowpath->wb_data[2], bp->slowpath->wb_data[3]);
+
+	/*
+	 * Lock the dmae channel. Disable BHs to prevent a dead-lock
+	 * as long as this code is called both from syscall context and
+	 * from ndo_set_rx_mode() flow that may be called from BH.
+	 */
+	spin_lock_bh(&bp->dmae_lock);
+
+	/* reset completion */
+	*wb_comp = 0;
+
+	/* post the command on the channel used for initializations */
+	bnx2x_post_dmae(bp, dmae, INIT_DMAE_C(bp));
+
+	/* wait for completion */
+	udelay(5);
+	while ((*wb_comp & ~DMAE_PCI_ERR_FLAG) != DMAE_COMP_VAL) {
+		DP(BNX2X_MSG_OFF, "wb_comp 0x%08x\n", *wb_comp);
+
+		if (!cnt) {
+			BNX2X_ERR("DMAE timeout!\n");
+			rc = DMAE_TIMEOUT;
+			goto unlock;
+		}
+		cnt--;
+		udelay(50);
+	}
+	if (*wb_comp & DMAE_PCI_ERR_FLAG) {
+		BNX2X_ERR("DMAE PCI error!\n");
+		rc = DMAE_PCI_ERROR;
+	}
+
+	DP(BNX2X_MSG_OFF, "data after [0x%08x 0x%08x 0x%08x 0x%08x]\n",
+	   bp->slowpath->wb_data[0], bp->slowpath->wb_data[1],
+	   bp->slowpath->wb_data[2], bp->slowpath->wb_data[3]);
+
+unlock:
+	spin_unlock_bh(&bp->dmae_lock);
+	return rc;
+}
+
+void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr,
+		      u32 len32)
+{
+	struct dmae_command dmae;
+
+	if (!bp->dmae_ready) {
+		u32 *data = bnx2x_sp(bp, wb_data[0]);
+
+		DP(BNX2X_MSG_OFF, "DMAE is not ready (dst_addr %08x  len32 %d)"
+		   "  using indirect\n", dst_addr, len32);
+		bnx2x_init_ind_wr(bp, dst_addr, data, len32);
+		return;
+	}
+
+	/* set opcode and fixed command fields */
+	bnx2x_prep_dmae_with_comp(bp, &dmae, DMAE_SRC_PCI, DMAE_DST_GRC);
+
+	/* fill in addresses and len */
+	dmae.src_addr_lo = U64_LO(dma_addr);
+	dmae.src_addr_hi = U64_HI(dma_addr);
+	dmae.dst_addr_lo = dst_addr >> 2;
+	dmae.dst_addr_hi = 0;
+	dmae.len = len32;
+
+	bnx2x_dp_dmae(bp, &dmae, BNX2X_MSG_OFF);
+
+	/* issue the command and wait for completion */
+	bnx2x_issue_dmae_with_comp(bp, &dmae);
+}
+
+void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32)
+{
+	struct dmae_command dmae;
+
+	if (!bp->dmae_ready) {
+		u32 *data = bnx2x_sp(bp, wb_data[0]);
+		int i;
+
+		DP(BNX2X_MSG_OFF, "DMAE is not ready (src_addr %08x  len32 %d)"
+		   "  using indirect\n", src_addr, len32);
+		for (i = 0; i < len32; i++)
+			data[i] = bnx2x_reg_rd_ind(bp, src_addr + i*4);
+		return;
+	}
+
+	/* set opcode and fixed command fields */
+	bnx2x_prep_dmae_with_comp(bp, &dmae, DMAE_SRC_GRC, DMAE_DST_PCI);
+
+	/* fill in addresses and len */
+	dmae.src_addr_lo = src_addr >> 2;
+	dmae.src_addr_hi = 0;
+	dmae.dst_addr_lo = U64_LO(bnx2x_sp_mapping(bp, wb_data));
+	dmae.dst_addr_hi = U64_HI(bnx2x_sp_mapping(bp, wb_data));
+	dmae.len = len32;
+
+	bnx2x_dp_dmae(bp, &dmae, BNX2X_MSG_OFF);
+
+	/* issue the command and wait for completion */
+	bnx2x_issue_dmae_with_comp(bp, &dmae);
+}
+
+static void bnx2x_write_dmae_phys_len(struct bnx2x *bp, dma_addr_t phys_addr,
+				      u32 addr, u32 len)
+{
+	int dmae_wr_max = DMAE_LEN32_WR_MAX(bp);
+	int offset = 0;
+
+	while (len > dmae_wr_max) {
+		bnx2x_write_dmae(bp, phys_addr + offset,
+				 addr + offset, dmae_wr_max);
+		offset += dmae_wr_max * 4;
+		len -= dmae_wr_max;
+	}
+
+	bnx2x_write_dmae(bp, phys_addr + offset, addr + offset, len);
+}
+
+/* used only for slowpath so not inlined */
+static void bnx2x_wb_wr(struct bnx2x *bp, int reg, u32 val_hi, u32 val_lo)
+{
+	u32 wb_write[2];
+
+	wb_write[0] = val_hi;
+	wb_write[1] = val_lo;
+	REG_WR_DMAE(bp, reg, wb_write, 2);
+}
+
+#ifdef USE_WB_RD
+static u64 bnx2x_wb_rd(struct bnx2x *bp, int reg)
+{
+	u32 wb_data[2];
+
+	REG_RD_DMAE(bp, reg, wb_data, 2);
+
+	return HILO_U64(wb_data[0], wb_data[1]);
+}
+#endif
+
+static int bnx2x_mc_assert(struct bnx2x *bp)
+{
+	char last_idx;
+	int i, rc = 0;
+	u32 row0, row1, row2, row3;
+
+	/* XSTORM */
+	last_idx = REG_RD8(bp, BAR_XSTRORM_INTMEM +
+			   XSTORM_ASSERT_LIST_INDEX_OFFSET);
+	if (last_idx)
+		BNX2X_ERR("XSTORM_ASSERT_LIST_INDEX 0x%x\n", last_idx);
+
+	/* print the asserts */
+	for (i = 0; i < STROM_ASSERT_ARRAY_SIZE; i++) {
+
+		row0 = REG_RD(bp, BAR_XSTRORM_INTMEM +
+			      XSTORM_ASSERT_LIST_OFFSET(i));
+		row1 = REG_RD(bp, BAR_XSTRORM_INTMEM +
+			      XSTORM_ASSERT_LIST_OFFSET(i) + 4);
+		row2 = REG_RD(bp, BAR_XSTRORM_INTMEM +
+			      XSTORM_ASSERT_LIST_OFFSET(i) + 8);
+		row3 = REG_RD(bp, BAR_XSTRORM_INTMEM +
+			      XSTORM_ASSERT_LIST_OFFSET(i) + 12);
+
+		if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
+			BNX2X_ERR("XSTORM_ASSERT_INDEX 0x%x = 0x%08x"
+				  " 0x%08x 0x%08x 0x%08x\n",
+				  i, row3, row2, row1, row0);
+			rc++;
+		} else {
+			break;
+		}
+	}
+
+	/* TSTORM */
+	last_idx = REG_RD8(bp, BAR_TSTRORM_INTMEM +
+			   TSTORM_ASSERT_LIST_INDEX_OFFSET);
+	if (last_idx)
+		BNX2X_ERR("TSTORM_ASSERT_LIST_INDEX 0x%x\n", last_idx);
+
+	/* print the asserts */
+	for (i = 0; i < STROM_ASSERT_ARRAY_SIZE; i++) {
+
+		row0 = REG_RD(bp, BAR_TSTRORM_INTMEM +
+			      TSTORM_ASSERT_LIST_OFFSET(i));
+		row1 = REG_RD(bp, BAR_TSTRORM_INTMEM +
+			      TSTORM_ASSERT_LIST_OFFSET(i) + 4);
+		row2 = REG_RD(bp, BAR_TSTRORM_INTMEM +
+			      TSTORM_ASSERT_LIST_OFFSET(i) + 8);
+		row3 = REG_RD(bp, BAR_TSTRORM_INTMEM +
+			      TSTORM_ASSERT_LIST_OFFSET(i) + 12);
+
+		if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
+			BNX2X_ERR("TSTORM_ASSERT_INDEX 0x%x = 0x%08x"
+				  " 0x%08x 0x%08x 0x%08x\n",
+				  i, row3, row2, row1, row0);
+			rc++;
+		} else {
+			break;
+		}
+	}
+
+	/* CSTORM */
+	last_idx = REG_RD8(bp, BAR_CSTRORM_INTMEM +
+			   CSTORM_ASSERT_LIST_INDEX_OFFSET);
+	if (last_idx)
+		BNX2X_ERR("CSTORM_ASSERT_LIST_INDEX 0x%x\n", last_idx);
+
+	/* print the asserts */
+	for (i = 0; i < STROM_ASSERT_ARRAY_SIZE; i++) {
+
+		row0 = REG_RD(bp, BAR_CSTRORM_INTMEM +
+			      CSTORM_ASSERT_LIST_OFFSET(i));
+		row1 = REG_RD(bp, BAR_CSTRORM_INTMEM +
+			      CSTORM_ASSERT_LIST_OFFSET(i) + 4);
+		row2 = REG_RD(bp, BAR_CSTRORM_INTMEM +
+			      CSTORM_ASSERT_LIST_OFFSET(i) + 8);
+		row3 = REG_RD(bp, BAR_CSTRORM_INTMEM +
+			      CSTORM_ASSERT_LIST_OFFSET(i) + 12);
+
+		if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
+			BNX2X_ERR("CSTORM_ASSERT_INDEX 0x%x = 0x%08x"
+				  " 0x%08x 0x%08x 0x%08x\n",
+				  i, row3, row2, row1, row0);
+			rc++;
+		} else {
+			break;
+		}
+	}
+
+	/* USTORM */
+	last_idx = REG_RD8(bp, BAR_USTRORM_INTMEM +
+			   USTORM_ASSERT_LIST_INDEX_OFFSET);
+	if (last_idx)
+		BNX2X_ERR("USTORM_ASSERT_LIST_INDEX 0x%x\n", last_idx);
+
+	/* print the asserts */
+	for (i = 0; i < STROM_ASSERT_ARRAY_SIZE; i++) {
+
+		row0 = REG_RD(bp, BAR_USTRORM_INTMEM +
+			      USTORM_ASSERT_LIST_OFFSET(i));
+		row1 = REG_RD(bp, BAR_USTRORM_INTMEM +
+			      USTORM_ASSERT_LIST_OFFSET(i) + 4);
+		row2 = REG_RD(bp, BAR_USTRORM_INTMEM +
+			      USTORM_ASSERT_LIST_OFFSET(i) + 8);
+		row3 = REG_RD(bp, BAR_USTRORM_INTMEM +
+			      USTORM_ASSERT_LIST_OFFSET(i) + 12);
+
+		if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
+			BNX2X_ERR("USTORM_ASSERT_INDEX 0x%x = 0x%08x"
+				  " 0x%08x 0x%08x 0x%08x\n",
+				  i, row3, row2, row1, row0);
+			rc++;
+		} else {
+			break;
+		}
+	}
+
+	return rc;
+}
+
+void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl)
+{
+	u32 addr, val;
+	u32 mark, offset;
+	__be32 data[9];
+	int word;
+	u32 trace_shmem_base;
+	if (BP_NOMCP(bp)) {
+		BNX2X_ERR("NO MCP - can not dump\n");
+		return;
+	}
+	netdev_printk(lvl, bp->dev, "bc %d.%d.%d\n",
+		(bp->common.bc_ver & 0xff0000) >> 16,
+		(bp->common.bc_ver & 0xff00) >> 8,
+		(bp->common.bc_ver & 0xff));
+
+	val = REG_RD(bp, MCP_REG_MCPR_CPU_PROGRAM_COUNTER);
+	if (val == REG_RD(bp, MCP_REG_MCPR_CPU_PROGRAM_COUNTER))
+		printk("%s" "MCP PC at 0x%x\n", lvl, val);
+
+	if (BP_PATH(bp) == 0)
+		trace_shmem_base = bp->common.shmem_base;
+	else
+		trace_shmem_base = SHMEM2_RD(bp, other_shmem_base_addr);
+	addr = trace_shmem_base - 0x0800 + 4;
+	mark = REG_RD(bp, addr);
+	mark = (CHIP_IS_E1x(bp) ? MCP_REG_MCPR_SCRATCH : MCP_A_REG_MCPR_SCRATCH)
+			+ ((mark + 0x3) & ~0x3) - 0x08000000;
+	printk("%s" "begin fw dump (mark 0x%x)\n", lvl, mark);
+
+	printk("%s", lvl);
+	for (offset = mark; offset <= trace_shmem_base; offset += 0x8*4) {
+		for (word = 0; word < 8; word++)
+			data[word] = htonl(REG_RD(bp, offset + 4*word));
+		data[8] = 0x0;
+		pr_cont("%s", (char *)data);
+	}
+	for (offset = addr + 4; offset <= mark; offset += 0x8*4) {
+		for (word = 0; word < 8; word++)
+			data[word] = htonl(REG_RD(bp, offset + 4*word));
+		data[8] = 0x0;
+		pr_cont("%s", (char *)data);
+	}
+	printk("%s" "end of fw dump\n", lvl);
+}
+
+static inline void bnx2x_fw_dump(struct bnx2x *bp)
+{
+	bnx2x_fw_dump_lvl(bp, KERN_ERR);
+}
+
+void bnx2x_panic_dump(struct bnx2x *bp)
+{
+	int i;
+	u16 j;
+	struct hc_sp_status_block_data sp_sb_data;
+	int func = BP_FUNC(bp);
+#ifdef BNX2X_STOP_ON_ERROR
+	u16 start = 0, end = 0;
+	u8 cos;
+#endif
+
+	bp->stats_state = STATS_STATE_DISABLED;
+	DP(BNX2X_MSG_STATS, "stats_state - DISABLED\n");
+
+	BNX2X_ERR("begin crash dump -----------------\n");
+
+	/* Indices */
+	/* Common */
+	BNX2X_ERR("def_idx(0x%x)  def_att_idx(0x%x)  attn_state(0x%x)"
+		  "  spq_prod_idx(0x%x) next_stats_cnt(0x%x)\n",
+		  bp->def_idx, bp->def_att_idx, bp->attn_state,
+		  bp->spq_prod_idx, bp->stats_counter);
+	BNX2X_ERR("DSB: attn bits(0x%x)  ack(0x%x)  id(0x%x)  idx(0x%x)\n",
+		  bp->def_status_blk->atten_status_block.attn_bits,
+		  bp->def_status_blk->atten_status_block.attn_bits_ack,
+		  bp->def_status_blk->atten_status_block.status_block_id,
+		  bp->def_status_blk->atten_status_block.attn_bits_index);
+	BNX2X_ERR("     def (");
+	for (i = 0; i < HC_SP_SB_MAX_INDICES; i++)
+		pr_cont("0x%x%s",
+		       bp->def_status_blk->sp_sb.index_values[i],
+		       (i == HC_SP_SB_MAX_INDICES - 1) ? ")  " : " ");
+
+	for (i = 0; i < sizeof(struct hc_sp_status_block_data)/sizeof(u32); i++)
+		*((u32 *)&sp_sb_data + i) = REG_RD(bp, BAR_CSTRORM_INTMEM +
+			CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(func) +
+			i*sizeof(u32));
+
+	pr_cont("igu_sb_id(0x%x)  igu_seg_id(0x%x) "
+			 "pf_id(0x%x)  vnic_id(0x%x)  "
+			 "vf_id(0x%x)  vf_valid (0x%x) "
+			 "state(0x%x)\n",
+	       sp_sb_data.igu_sb_id,
+	       sp_sb_data.igu_seg_id,
+	       sp_sb_data.p_func.pf_id,
+	       sp_sb_data.p_func.vnic_id,
+	       sp_sb_data.p_func.vf_id,
+	       sp_sb_data.p_func.vf_valid,
+	       sp_sb_data.state);
+
+
+	for_each_eth_queue(bp, i) {
+		struct bnx2x_fastpath *fp = &bp->fp[i];
+		int loop;
+		struct hc_status_block_data_e2 sb_data_e2;
+		struct hc_status_block_data_e1x sb_data_e1x;
+		struct hc_status_block_sm  *hc_sm_p =
+			CHIP_IS_E1x(bp) ?
+			sb_data_e1x.common.state_machine :
+			sb_data_e2.common.state_machine;
+		struct hc_index_data *hc_index_p =
+			CHIP_IS_E1x(bp) ?
+			sb_data_e1x.index_data :
+			sb_data_e2.index_data;
+		u8 data_size, cos;
+		u32 *sb_data_p;
+		struct bnx2x_fp_txdata txdata;
+
+		/* Rx */
+		BNX2X_ERR("fp%d: rx_bd_prod(0x%x)  rx_bd_cons(0x%x)"
+			  "  rx_comp_prod(0x%x)"
+			  "  rx_comp_cons(0x%x)  *rx_cons_sb(0x%x)\n",
+			  i, fp->rx_bd_prod, fp->rx_bd_cons,
+			  fp->rx_comp_prod,
+			  fp->rx_comp_cons, le16_to_cpu(*fp->rx_cons_sb));
+		BNX2X_ERR("     rx_sge_prod(0x%x)  last_max_sge(0x%x)"
+			  "  fp_hc_idx(0x%x)\n",
+			  fp->rx_sge_prod, fp->last_max_sge,
+			  le16_to_cpu(fp->fp_hc_idx));
+
+		/* Tx */
+		for_each_cos_in_tx_queue(fp, cos)
+		{
+			txdata = fp->txdata[cos];
+			BNX2X_ERR("fp%d: tx_pkt_prod(0x%x)  tx_pkt_cons(0x%x)"
+				  "  tx_bd_prod(0x%x)  tx_bd_cons(0x%x)"
+				  "  *tx_cons_sb(0x%x)\n",
+				  i, txdata.tx_pkt_prod,
+				  txdata.tx_pkt_cons, txdata.tx_bd_prod,
+				  txdata.tx_bd_cons,
+				  le16_to_cpu(*txdata.tx_cons_sb));
+		}
+
+		loop = CHIP_IS_E1x(bp) ?
+			HC_SB_MAX_INDICES_E1X : HC_SB_MAX_INDICES_E2;
+
+		/* host sb data */
+
+#ifdef BCM_CNIC
+		if (IS_FCOE_FP(fp))
+			continue;
+#endif
+		BNX2X_ERR("     run indexes (");
+		for (j = 0; j < HC_SB_MAX_SM; j++)
+			pr_cont("0x%x%s",
+			       fp->sb_running_index[j],
+			       (j == HC_SB_MAX_SM - 1) ? ")" : " ");
+
+		BNX2X_ERR("     indexes (");
+		for (j = 0; j < loop; j++)
+			pr_cont("0x%x%s",
+			       fp->sb_index_values[j],
+			       (j == loop - 1) ? ")" : " ");
+		/* fw sb data */
+		data_size = CHIP_IS_E1x(bp) ?
+			sizeof(struct hc_status_block_data_e1x) :
+			sizeof(struct hc_status_block_data_e2);
+		data_size /= sizeof(u32);
+		sb_data_p = CHIP_IS_E1x(bp) ?
+			(u32 *)&sb_data_e1x :
+			(u32 *)&sb_data_e2;
+		/* copy sb data in here */
+		for (j = 0; j < data_size; j++)
+			*(sb_data_p + j) = REG_RD(bp, BAR_CSTRORM_INTMEM +
+				CSTORM_STATUS_BLOCK_DATA_OFFSET(fp->fw_sb_id) +
+				j * sizeof(u32));
+
+		if (!CHIP_IS_E1x(bp)) {
+			pr_cont("pf_id(0x%x)  vf_id(0x%x)  vf_valid(0x%x) "
+				"vnic_id(0x%x)  same_igu_sb_1b(0x%x) "
+				"state(0x%x)\n",
+				sb_data_e2.common.p_func.pf_id,
+				sb_data_e2.common.p_func.vf_id,
+				sb_data_e2.common.p_func.vf_valid,
+				sb_data_e2.common.p_func.vnic_id,
+				sb_data_e2.common.same_igu_sb_1b,
+				sb_data_e2.common.state);
+		} else {
+			pr_cont("pf_id(0x%x)  vf_id(0x%x)  vf_valid(0x%x) "
+				"vnic_id(0x%x)  same_igu_sb_1b(0x%x) "
+				"state(0x%x)\n",
+				sb_data_e1x.common.p_func.pf_id,
+				sb_data_e1x.common.p_func.vf_id,
+				sb_data_e1x.common.p_func.vf_valid,
+				sb_data_e1x.common.p_func.vnic_id,
+				sb_data_e1x.common.same_igu_sb_1b,
+				sb_data_e1x.common.state);
+		}
+
+		/* SB_SMs data */
+		for (j = 0; j < HC_SB_MAX_SM; j++) {
+			pr_cont("SM[%d] __flags (0x%x) "
+			       "igu_sb_id (0x%x)  igu_seg_id(0x%x) "
+			       "time_to_expire (0x%x) "
+			       "timer_value(0x%x)\n", j,
+			       hc_sm_p[j].__flags,
+			       hc_sm_p[j].igu_sb_id,
+			       hc_sm_p[j].igu_seg_id,
+			       hc_sm_p[j].time_to_expire,
+			       hc_sm_p[j].timer_value);
+		}
+
+		/* Indecies data */
+		for (j = 0; j < loop; j++) {
+			pr_cont("INDEX[%d] flags (0x%x) "
+					 "timeout (0x%x)\n", j,
+			       hc_index_p[j].flags,
+			       hc_index_p[j].timeout);
+		}
+	}
+
+#ifdef BNX2X_STOP_ON_ERROR
+	/* Rings */
+	/* Rx */
+	for_each_rx_queue(bp, i) {
+		struct bnx2x_fastpath *fp = &bp->fp[i];
+
+		start = RX_BD(le16_to_cpu(*fp->rx_cons_sb) - 10);
+		end = RX_BD(le16_to_cpu(*fp->rx_cons_sb) + 503);
+		for (j = start; j != end; j = RX_BD(j + 1)) {
+			u32 *rx_bd = (u32 *)&fp->rx_desc_ring[j];
+			struct sw_rx_bd *sw_bd = &fp->rx_buf_ring[j];
+
+			BNX2X_ERR("fp%d: rx_bd[%x]=[%x:%x]  sw_bd=[%p]\n",
+				  i, j, rx_bd[1], rx_bd[0], sw_bd->skb);
+		}
+
+		start = RX_SGE(fp->rx_sge_prod);
+		end = RX_SGE(fp->last_max_sge);
+		for (j = start; j != end; j = RX_SGE(j + 1)) {
+			u32 *rx_sge = (u32 *)&fp->rx_sge_ring[j];
+			struct sw_rx_page *sw_page = &fp->rx_page_ring[j];
+
+			BNX2X_ERR("fp%d: rx_sge[%x]=[%x:%x]  sw_page=[%p]\n",
+				  i, j, rx_sge[1], rx_sge[0], sw_page->page);
+		}
+
+		start = RCQ_BD(fp->rx_comp_cons - 10);
+		end = RCQ_BD(fp->rx_comp_cons + 503);
+		for (j = start; j != end; j = RCQ_BD(j + 1)) {
+			u32 *cqe = (u32 *)&fp->rx_comp_ring[j];
+
+			BNX2X_ERR("fp%d: cqe[%x]=[%x:%x:%x:%x]\n",
+				  i, j, cqe[0], cqe[1], cqe[2], cqe[3]);
+		}
+	}
+
+	/* Tx */
+	for_each_tx_queue(bp, i) {
+		struct bnx2x_fastpath *fp = &bp->fp[i];
+		for_each_cos_in_tx_queue(fp, cos) {
+			struct bnx2x_fp_txdata *txdata = &fp->txdata[cos];
+
+			start = TX_BD(le16_to_cpu(*txdata->tx_cons_sb) - 10);
+			end = TX_BD(le16_to_cpu(*txdata->tx_cons_sb) + 245);
+			for (j = start; j != end; j = TX_BD(j + 1)) {
+				struct sw_tx_bd *sw_bd =
+					&txdata->tx_buf_ring[j];
+
+				BNX2X_ERR("fp%d: txdata %d, "
+					  "packet[%x]=[%p,%x]\n",
+					  i, cos, j, sw_bd->skb,
+					  sw_bd->first_bd);
+			}
+
+			start = TX_BD(txdata->tx_bd_cons - 10);
+			end = TX_BD(txdata->tx_bd_cons + 254);
+			for (j = start; j != end; j = TX_BD(j + 1)) {
+				u32 *tx_bd = (u32 *)&txdata->tx_desc_ring[j];
+
+				BNX2X_ERR("fp%d: txdata %d, tx_bd[%x]="
+					  "[%x:%x:%x:%x]\n",
+					  i, cos, j, tx_bd[0], tx_bd[1],
+					  tx_bd[2], tx_bd[3]);
+			}
+		}
+	}
+#endif
+	bnx2x_fw_dump(bp);
+	bnx2x_mc_assert(bp);
+	BNX2X_ERR("end crash dump -----------------\n");
+}
+
+/*
+ * FLR Support for E2
+ *
+ * bnx2x_pf_flr_clnup() is called during nic_load in the per function HW
+ * initialization.
+ */
+#define FLR_WAIT_USEC		10000	/* 10 miliseconds */
+#define FLR_WAIT_INTERAVAL	50	/* usec */
+#define	FLR_POLL_CNT		(FLR_WAIT_USEC/FLR_WAIT_INTERAVAL) /* 200 */
+
+struct pbf_pN_buf_regs {
+	int pN;
+	u32 init_crd;
+	u32 crd;
+	u32 crd_freed;
+};
+
+struct pbf_pN_cmd_regs {
+	int pN;
+	u32 lines_occup;
+	u32 lines_freed;
+};
+
+static void bnx2x_pbf_pN_buf_flushed(struct bnx2x *bp,
+				     struct pbf_pN_buf_regs *regs,
+				     u32 poll_count)
+{
+	u32 init_crd, crd, crd_start, crd_freed, crd_freed_start;
+	u32 cur_cnt = poll_count;
+
+	crd_freed = crd_freed_start = REG_RD(bp, regs->crd_freed);
+	crd = crd_start = REG_RD(bp, regs->crd);
+	init_crd = REG_RD(bp, regs->init_crd);
+
+	DP(BNX2X_MSG_SP, "INIT CREDIT[%d] : %x\n", regs->pN, init_crd);
+	DP(BNX2X_MSG_SP, "CREDIT[%d]      : s:%x\n", regs->pN, crd);
+	DP(BNX2X_MSG_SP, "CREDIT_FREED[%d]: s:%x\n", regs->pN, crd_freed);
+
+	while ((crd != init_crd) && ((u32)SUB_S32(crd_freed, crd_freed_start) <
+	       (init_crd - crd_start))) {
+		if (cur_cnt--) {
+			udelay(FLR_WAIT_INTERAVAL);
+			crd = REG_RD(bp, regs->crd);
+			crd_freed = REG_RD(bp, regs->crd_freed);
+		} else {
+			DP(BNX2X_MSG_SP, "PBF tx buffer[%d] timed out\n",
+			   regs->pN);
+			DP(BNX2X_MSG_SP, "CREDIT[%d]      : c:%x\n",
+			   regs->pN, crd);
+			DP(BNX2X_MSG_SP, "CREDIT_FREED[%d]: c:%x\n",
+			   regs->pN, crd_freed);
+			break;
+		}
+	}
+	DP(BNX2X_MSG_SP, "Waited %d*%d usec for PBF tx buffer[%d]\n",
+	   poll_count-cur_cnt, FLR_WAIT_INTERAVAL, regs->pN);
+}
+
+static void bnx2x_pbf_pN_cmd_flushed(struct bnx2x *bp,
+				     struct pbf_pN_cmd_regs *regs,
+				     u32 poll_count)
+{
+	u32 occup, to_free, freed, freed_start;
+	u32 cur_cnt = poll_count;
+
+	occup = to_free = REG_RD(bp, regs->lines_occup);
+	freed = freed_start = REG_RD(bp, regs->lines_freed);
+
+	DP(BNX2X_MSG_SP, "OCCUPANCY[%d]   : s:%x\n", regs->pN, occup);
+	DP(BNX2X_MSG_SP, "LINES_FREED[%d] : s:%x\n", regs->pN, freed);
+
+	while (occup && ((u32)SUB_S32(freed, freed_start) < to_free)) {
+		if (cur_cnt--) {
+			udelay(FLR_WAIT_INTERAVAL);
+			occup = REG_RD(bp, regs->lines_occup);
+			freed = REG_RD(bp, regs->lines_freed);
+		} else {
+			DP(BNX2X_MSG_SP, "PBF cmd queue[%d] timed out\n",
+			   regs->pN);
+			DP(BNX2X_MSG_SP, "OCCUPANCY[%d]   : s:%x\n",
+			   regs->pN, occup);
+			DP(BNX2X_MSG_SP, "LINES_FREED[%d] : s:%x\n",
+			   regs->pN, freed);
+			break;
+		}
+	}
+	DP(BNX2X_MSG_SP, "Waited %d*%d usec for PBF cmd queue[%d]\n",
+	   poll_count-cur_cnt, FLR_WAIT_INTERAVAL, regs->pN);
+}
+
+static inline u32 bnx2x_flr_clnup_reg_poll(struct bnx2x *bp, u32 reg,
+				     u32 expected, u32 poll_count)
+{
+	u32 cur_cnt = poll_count;
+	u32 val;
+
+	while ((val = REG_RD(bp, reg)) != expected && cur_cnt--)
+		udelay(FLR_WAIT_INTERAVAL);
+
+	return val;
+}
+
+static inline int bnx2x_flr_clnup_poll_hw_counter(struct bnx2x *bp, u32 reg,
+						  char *msg, u32 poll_cnt)
+{
+	u32 val = bnx2x_flr_clnup_reg_poll(bp, reg, 0, poll_cnt);
+	if (val != 0) {
+		BNX2X_ERR("%s usage count=%d\n", msg, val);
+		return 1;
+	}
+	return 0;
+}
+
+static u32 bnx2x_flr_clnup_poll_count(struct bnx2x *bp)
+{
+	/* adjust polling timeout */
+	if (CHIP_REV_IS_EMUL(bp))
+		return FLR_POLL_CNT * 2000;
+
+	if (CHIP_REV_IS_FPGA(bp))
+		return FLR_POLL_CNT * 120;
+
+	return FLR_POLL_CNT;
+}
+
+static void bnx2x_tx_hw_flushed(struct bnx2x *bp, u32 poll_count)
+{
+	struct pbf_pN_cmd_regs cmd_regs[] = {
+		{0, (CHIP_IS_E3B0(bp)) ?
+			PBF_REG_TQ_OCCUPANCY_Q0 :
+			PBF_REG_P0_TQ_OCCUPANCY,
+		    (CHIP_IS_E3B0(bp)) ?
+			PBF_REG_TQ_LINES_FREED_CNT_Q0 :
+			PBF_REG_P0_TQ_LINES_FREED_CNT},
+		{1, (CHIP_IS_E3B0(bp)) ?
+			PBF_REG_TQ_OCCUPANCY_Q1 :
+			PBF_REG_P1_TQ_OCCUPANCY,
+		    (CHIP_IS_E3B0(bp)) ?
+			PBF_REG_TQ_LINES_FREED_CNT_Q1 :
+			PBF_REG_P1_TQ_LINES_FREED_CNT},
+		{4, (CHIP_IS_E3B0(bp)) ?
+			PBF_REG_TQ_OCCUPANCY_LB_Q :
+			PBF_REG_P4_TQ_OCCUPANCY,
+		    (CHIP_IS_E3B0(bp)) ?
+			PBF_REG_TQ_LINES_FREED_CNT_LB_Q :
+			PBF_REG_P4_TQ_LINES_FREED_CNT}
+	};
+
+	struct pbf_pN_buf_regs buf_regs[] = {
+		{0, (CHIP_IS_E3B0(bp)) ?
+			PBF_REG_INIT_CRD_Q0 :
+			PBF_REG_P0_INIT_CRD ,
+		    (CHIP_IS_E3B0(bp)) ?
+			PBF_REG_CREDIT_Q0 :
+			PBF_REG_P0_CREDIT,
+		    (CHIP_IS_E3B0(bp)) ?
+			PBF_REG_INTERNAL_CRD_FREED_CNT_Q0 :
+			PBF_REG_P0_INTERNAL_CRD_FREED_CNT},
+		{1, (CHIP_IS_E3B0(bp)) ?
+			PBF_REG_INIT_CRD_Q1 :
+			PBF_REG_P1_INIT_CRD,
+		    (CHIP_IS_E3B0(bp)) ?
+			PBF_REG_CREDIT_Q1 :
+			PBF_REG_P1_CREDIT,
+		    (CHIP_IS_E3B0(bp)) ?
+			PBF_REG_INTERNAL_CRD_FREED_CNT_Q1 :
+			PBF_REG_P1_INTERNAL_CRD_FREED_CNT},
+		{4, (CHIP_IS_E3B0(bp)) ?
+			PBF_REG_INIT_CRD_LB_Q :
+			PBF_REG_P4_INIT_CRD,
+		    (CHIP_IS_E3B0(bp)) ?
+			PBF_REG_CREDIT_LB_Q :
+			PBF_REG_P4_CREDIT,
+		    (CHIP_IS_E3B0(bp)) ?
+			PBF_REG_INTERNAL_CRD_FREED_CNT_LB_Q :
+			PBF_REG_P4_INTERNAL_CRD_FREED_CNT},
+	};
+
+	int i;
+
+	/* Verify the command queues are flushed P0, P1, P4 */
+	for (i = 0; i < ARRAY_SIZE(cmd_regs); i++)
+		bnx2x_pbf_pN_cmd_flushed(bp, &cmd_regs[i], poll_count);
+
+
+	/* Verify the transmission buffers are flushed P0, P1, P4 */
+	for (i = 0; i < ARRAY_SIZE(buf_regs); i++)
+		bnx2x_pbf_pN_buf_flushed(bp, &buf_regs[i], poll_count);
+}
+
+#define OP_GEN_PARAM(param) \
+	(((param) << SDM_OP_GEN_COMP_PARAM_SHIFT) & SDM_OP_GEN_COMP_PARAM)
+
+#define OP_GEN_TYPE(type) \
+	(((type) << SDM_OP_GEN_COMP_TYPE_SHIFT) & SDM_OP_GEN_COMP_TYPE)
+
+#define OP_GEN_AGG_VECT(index) \
+	(((index) << SDM_OP_GEN_AGG_VECT_IDX_SHIFT) & SDM_OP_GEN_AGG_VECT_IDX)
+
+
+static inline int bnx2x_send_final_clnup(struct bnx2x *bp, u8 clnup_func,
+					 u32 poll_cnt)
+{
+	struct sdm_op_gen op_gen = {0};
+
+	u32 comp_addr = BAR_CSTRORM_INTMEM +
+			CSTORM_FINAL_CLEANUP_COMPLETE_OFFSET(clnup_func);
+	int ret = 0;
+
+	if (REG_RD(bp, comp_addr)) {
+		BNX2X_ERR("Cleanup complete is not 0\n");
+		return 1;
+	}
+
+	op_gen.command |= OP_GEN_PARAM(XSTORM_AGG_INT_FINAL_CLEANUP_INDEX);
+	op_gen.command |= OP_GEN_TYPE(XSTORM_AGG_INT_FINAL_CLEANUP_COMP_TYPE);
+	op_gen.command |= OP_GEN_AGG_VECT(clnup_func);
+	op_gen.command |= 1 << SDM_OP_GEN_AGG_VECT_IDX_VALID_SHIFT;
+
+	DP(BNX2X_MSG_SP, "FW Final cleanup\n");
+	REG_WR(bp, XSDM_REG_OPERATION_GEN, op_gen.command);
+
+	if (bnx2x_flr_clnup_reg_poll(bp, comp_addr, 1, poll_cnt) != 1) {
+		BNX2X_ERR("FW final cleanup did not succeed\n");
+		ret = 1;
+	}
+	/* Zero completion for nxt FLR */
+	REG_WR(bp, comp_addr, 0);
+
+	return ret;
+}
+
+static inline u8 bnx2x_is_pcie_pending(struct pci_dev *dev)
+{
+	int pos;
+	u16 status;
+
+	pos = pci_pcie_cap(dev);
+	if (!pos)
+		return false;
+
+	pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &status);
+	return status & PCI_EXP_DEVSTA_TRPND;
+}
+
+/* PF FLR specific routines
+*/
+static int bnx2x_poll_hw_usage_counters(struct bnx2x *bp, u32 poll_cnt)
+{
+
+	/* wait for CFC PF usage-counter to zero (includes all the VFs) */
+	if (bnx2x_flr_clnup_poll_hw_counter(bp,
+			CFC_REG_NUM_LCIDS_INSIDE_PF,
+			"CFC PF usage counter timed out",
+			poll_cnt))
+		return 1;
+
+
+	/* Wait for DQ PF usage-counter to zero (until DQ cleanup) */
+	if (bnx2x_flr_clnup_poll_hw_counter(bp,
+			DORQ_REG_PF_USAGE_CNT,
+			"DQ PF usage counter timed out",
+			poll_cnt))
+		return 1;
+
+	/* Wait for QM PF usage-counter to zero (until DQ cleanup) */
+	if (bnx2x_flr_clnup_poll_hw_counter(bp,
+			QM_REG_PF_USG_CNT_0 + 4*BP_FUNC(bp),
+			"QM PF usage counter timed out",
+			poll_cnt))
+		return 1;
+
+	/* Wait for Timer PF usage-counters to zero (until DQ cleanup) */
+	if (bnx2x_flr_clnup_poll_hw_counter(bp,
+			TM_REG_LIN0_VNIC_UC + 4*BP_PORT(bp),
+			"Timers VNIC usage counter timed out",
+			poll_cnt))
+		return 1;
+	if (bnx2x_flr_clnup_poll_hw_counter(bp,
+			TM_REG_LIN0_NUM_SCANS + 4*BP_PORT(bp),
+			"Timers NUM_SCANS usage counter timed out",
+			poll_cnt))
+		return 1;
+
+	/* Wait DMAE PF usage counter to zero */
+	if (bnx2x_flr_clnup_poll_hw_counter(bp,
+			dmae_reg_go_c[INIT_DMAE_C(bp)],
+			"DMAE dommand register timed out",
+			poll_cnt))
+		return 1;
+
+	return 0;
+}
+
+static void bnx2x_hw_enable_status(struct bnx2x *bp)
+{
+	u32 val;
+
+	val = REG_RD(bp, CFC_REG_WEAK_ENABLE_PF);
+	DP(BNX2X_MSG_SP, "CFC_REG_WEAK_ENABLE_PF is 0x%x\n", val);
+
+	val = REG_RD(bp, PBF_REG_DISABLE_PF);
+	DP(BNX2X_MSG_SP, "PBF_REG_DISABLE_PF is 0x%x\n", val);
+
+	val = REG_RD(bp, IGU_REG_PCI_PF_MSI_EN);
+	DP(BNX2X_MSG_SP, "IGU_REG_PCI_PF_MSI_EN is 0x%x\n", val);
+
+	val = REG_RD(bp, IGU_REG_PCI_PF_MSIX_EN);
+	DP(BNX2X_MSG_SP, "IGU_REG_PCI_PF_MSIX_EN is 0x%x\n", val);
+
+	val = REG_RD(bp, IGU_REG_PCI_PF_MSIX_FUNC_MASK);
+	DP(BNX2X_MSG_SP, "IGU_REG_PCI_PF_MSIX_FUNC_MASK is 0x%x\n", val);
+
+	val = REG_RD(bp, PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR);
+	DP(BNX2X_MSG_SP, "PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR is 0x%x\n", val);
+
+	val = REG_RD(bp, PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR);
+	DP(BNX2X_MSG_SP, "PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR is 0x%x\n", val);
+
+	val = REG_RD(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER);
+	DP(BNX2X_MSG_SP, "PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER is 0x%x\n",
+	   val);
+}
+
+static int bnx2x_pf_flr_clnup(struct bnx2x *bp)
+{
+	u32 poll_cnt = bnx2x_flr_clnup_poll_count(bp);
+
+	DP(BNX2X_MSG_SP, "Cleanup after FLR PF[%d]\n", BP_ABS_FUNC(bp));
+
+	/* Re-enable PF target read access */
+	REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1);
+
+	/* Poll HW usage counters */
+	if (bnx2x_poll_hw_usage_counters(bp, poll_cnt))
+		return -EBUSY;
+
+	/* Zero the igu 'trailing edge' and 'leading edge' */
+
+	/* Send the FW cleanup command */
+	if (bnx2x_send_final_clnup(bp, (u8)BP_FUNC(bp), poll_cnt))
+		return -EBUSY;
+
+	/* ATC cleanup */
+
+	/* Verify TX hw is flushed */
+	bnx2x_tx_hw_flushed(bp, poll_cnt);
+
+	/* Wait 100ms (not adjusted according to platform) */
+	msleep(100);
+
+	/* Verify no pending pci transactions */
+	if (bnx2x_is_pcie_pending(bp->pdev))
+		BNX2X_ERR("PCIE Transactions still pending\n");
+
+	/* Debug */
+	bnx2x_hw_enable_status(bp);
+
+	/*
+	 * Master enable - Due to WB DMAE writes performed before this
+	 * register is re-initialized as part of the regular function init
+	 */
+	REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
+
+	return 0;
+}
+
+static void bnx2x_hc_int_enable(struct bnx2x *bp)
+{
+	int port = BP_PORT(bp);
+	u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
+	u32 val = REG_RD(bp, addr);
+	int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0;
+	int msi = (bp->flags & USING_MSI_FLAG) ? 1 : 0;
+
+	if (msix) {
+		val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
+			 HC_CONFIG_0_REG_INT_LINE_EN_0);
+		val |= (HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
+			HC_CONFIG_0_REG_ATTN_BIT_EN_0);
+	} else if (msi) {
+		val &= ~HC_CONFIG_0_REG_INT_LINE_EN_0;
+		val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
+			HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
+			HC_CONFIG_0_REG_ATTN_BIT_EN_0);
+	} else {
+		val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
+			HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
+			HC_CONFIG_0_REG_INT_LINE_EN_0 |
+			HC_CONFIG_0_REG_ATTN_BIT_EN_0);
+
+		if (!CHIP_IS_E1(bp)) {
+			DP(NETIF_MSG_INTR, "write %x to HC %d (addr 0x%x)\n",
+			   val, port, addr);
+
+			REG_WR(bp, addr, val);
+
+			val &= ~HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0;
+		}
+	}
+
+	if (CHIP_IS_E1(bp))
+		REG_WR(bp, HC_REG_INT_MASK + port*4, 0x1FFFF);
+
+	DP(NETIF_MSG_INTR, "write %x to HC %d (addr 0x%x)  mode %s\n",
+	   val, port, addr, (msix ? "MSI-X" : (msi ? "MSI" : "INTx")));
+
+	REG_WR(bp, addr, val);
+	/*
+	 * Ensure that HC_CONFIG is written before leading/trailing edge config
+	 */
+	mmiowb();
+	barrier();
+
+	if (!CHIP_IS_E1(bp)) {
+		/* init leading/trailing edge */
+		if (IS_MF(bp)) {
+			val = (0xee0f | (1 << (BP_E1HVN(bp) + 4)));
+			if (bp->port.pmf)
+				/* enable nig and gpio3 attention */
+				val |= 0x1100;
+		} else
+			val = 0xffff;
+
+		REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, val);
+		REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, val);
+	}
+
+	/* Make sure that interrupts are indeed enabled from here on */
+	mmiowb();
+}
+
+static void bnx2x_igu_int_enable(struct bnx2x *bp)
+{
+	u32 val;
+	int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0;
+	int msi = (bp->flags & USING_MSI_FLAG) ? 1 : 0;
+
+	val = REG_RD(bp, IGU_REG_PF_CONFIGURATION);
+
+	if (msix) {
+		val &= ~(IGU_PF_CONF_INT_LINE_EN |
+			 IGU_PF_CONF_SINGLE_ISR_EN);
+		val |= (IGU_PF_CONF_FUNC_EN |
+			IGU_PF_CONF_MSI_MSIX_EN |
+			IGU_PF_CONF_ATTN_BIT_EN);
+	} else if (msi) {
+		val &= ~IGU_PF_CONF_INT_LINE_EN;
+		val |= (IGU_PF_CONF_FUNC_EN |
+			IGU_PF_CONF_MSI_MSIX_EN |
+			IGU_PF_CONF_ATTN_BIT_EN |
+			IGU_PF_CONF_SINGLE_ISR_EN);
+	} else {
+		val &= ~IGU_PF_CONF_MSI_MSIX_EN;
+		val |= (IGU_PF_CONF_FUNC_EN |
+			IGU_PF_CONF_INT_LINE_EN |
+			IGU_PF_CONF_ATTN_BIT_EN |
+			IGU_PF_CONF_SINGLE_ISR_EN);
+	}
+
+	DP(NETIF_MSG_INTR, "write 0x%x to IGU  mode %s\n",
+	   val, (msix ? "MSI-X" : (msi ? "MSI" : "INTx")));
+
+	REG_WR(bp, IGU_REG_PF_CONFIGURATION, val);
+
+	barrier();
+
+	/* init leading/trailing edge */
+	if (IS_MF(bp)) {
+		val = (0xee0f | (1 << (BP_E1HVN(bp) + 4)));
+		if (bp->port.pmf)
+			/* enable nig and gpio3 attention */
+			val |= 0x1100;
+	} else
+		val = 0xffff;
+
+	REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, val);
+	REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, val);
+
+	/* Make sure that interrupts are indeed enabled from here on */
+	mmiowb();
+}
+
+void bnx2x_int_enable(struct bnx2x *bp)
+{
+	if (bp->common.int_block == INT_BLOCK_HC)
+		bnx2x_hc_int_enable(bp);
+	else
+		bnx2x_igu_int_enable(bp);
+}
+
+static void bnx2x_hc_int_disable(struct bnx2x *bp)
+{
+	int port = BP_PORT(bp);
+	u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
+	u32 val = REG_RD(bp, addr);
+
+	/*
+	 * in E1 we must use only PCI configuration space to disable
+	 * MSI/MSIX capablility
+	 * It's forbitten to disable IGU_PF_CONF_MSI_MSIX_EN in HC block
+	 */
+	if (CHIP_IS_E1(bp)) {
+		/*  Since IGU_PF_CONF_MSI_MSIX_EN still always on
+		 *  Use mask register to prevent from HC sending interrupts
+		 *  after we exit the function
+		 */
+		REG_WR(bp, HC_REG_INT_MASK + port*4, 0);
+
+		val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
+			 HC_CONFIG_0_REG_INT_LINE_EN_0 |
+			 HC_CONFIG_0_REG_ATTN_BIT_EN_0);
+	} else
+		val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
+			 HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
+			 HC_CONFIG_0_REG_INT_LINE_EN_0 |
+			 HC_CONFIG_0_REG_ATTN_BIT_EN_0);
+
+	DP(NETIF_MSG_INTR, "write %x to HC %d (addr 0x%x)\n",
+	   val, port, addr);
+
+	/* flush all outstanding writes */
+	mmiowb();
+
+	REG_WR(bp, addr, val);
+	if (REG_RD(bp, addr) != val)
+		BNX2X_ERR("BUG! proper val not read from IGU!\n");
+}
+
+static void bnx2x_igu_int_disable(struct bnx2x *bp)
+{
+	u32 val = REG_RD(bp, IGU_REG_PF_CONFIGURATION);
+
+	val &= ~(IGU_PF_CONF_MSI_MSIX_EN |
+		 IGU_PF_CONF_INT_LINE_EN |
+		 IGU_PF_CONF_ATTN_BIT_EN);
+
+	DP(NETIF_MSG_INTR, "write %x to IGU\n", val);
+
+	/* flush all outstanding writes */
+	mmiowb();
+
+	REG_WR(bp, IGU_REG_PF_CONFIGURATION, val);
+	if (REG_RD(bp, IGU_REG_PF_CONFIGURATION) != val)
+		BNX2X_ERR("BUG! proper val not read from IGU!\n");
+}
+
+void bnx2x_int_disable(struct bnx2x *bp)
+{
+	if (bp->common.int_block == INT_BLOCK_HC)
+		bnx2x_hc_int_disable(bp);
+	else
+		bnx2x_igu_int_disable(bp);
+}
+
+void bnx2x_int_disable_sync(struct bnx2x *bp, int disable_hw)
+{
+	int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0;
+	int i, offset;
+
+	if (disable_hw)
+		/* prevent the HW from sending interrupts */
+		bnx2x_int_disable(bp);
+
+	/* make sure all ISRs are done */
+	if (msix) {
+		synchronize_irq(bp->msix_table[0].vector);
+		offset = 1;
+#ifdef BCM_CNIC
+		offset++;
+#endif
+		for_each_eth_queue(bp, i)
+			synchronize_irq(bp->msix_table[offset++].vector);
+	} else
+		synchronize_irq(bp->pdev->irq);
+
+	/* make sure sp_task is not running */
+	cancel_delayed_work(&bp->sp_task);
+	cancel_delayed_work(&bp->period_task);
+	flush_workqueue(bnx2x_wq);
+}
+
+/* fast path */
+
+/*
+ * General service functions
+ */
+
+/* Return true if succeeded to acquire the lock */
+static bool bnx2x_trylock_hw_lock(struct bnx2x *bp, u32 resource)
+{
+	u32 lock_status;
+	u32 resource_bit = (1 << resource);
+	int func = BP_FUNC(bp);
+	u32 hw_lock_control_reg;
+
+	DP(NETIF_MSG_HW, "Trying to take a lock on resource %d\n", resource);
+
+	/* Validating that the resource is within range */
+	if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
+		DP(NETIF_MSG_HW,
+		   "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
+		   resource, HW_LOCK_MAX_RESOURCE_VALUE);
+		return false;
+	}
+
+	if (func <= 5)
+		hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8);
+	else
+		hw_lock_control_reg =
+				(MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8);
+
+	/* Try to acquire the lock */
+	REG_WR(bp, hw_lock_control_reg + 4, resource_bit);
+	lock_status = REG_RD(bp, hw_lock_control_reg);
+	if (lock_status & resource_bit)
+		return true;
+
+	DP(NETIF_MSG_HW, "Failed to get a lock on resource %d\n", resource);
+	return false;
+}
+
+/**
+ * bnx2x_get_leader_lock_resource - get the recovery leader resource id
+ *
+ * @bp:	driver handle
+ *
+ * Returns the recovery leader resource id according to the engine this function
+ * belongs to. Currently only only 2 engines is supported.
+ */
+static inline int bnx2x_get_leader_lock_resource(struct bnx2x *bp)
+{
+	if (BP_PATH(bp))
+		return HW_LOCK_RESOURCE_RECOVERY_LEADER_1;
+	else
+		return HW_LOCK_RESOURCE_RECOVERY_LEADER_0;
+}
+
+/**
+ * bnx2x_trylock_leader_lock- try to aquire a leader lock.
+ *
+ * @bp: driver handle
+ *
+ * Tries to aquire a leader lock for cuurent engine.
+ */
+static inline bool bnx2x_trylock_leader_lock(struct bnx2x *bp)
+{
+	return bnx2x_trylock_hw_lock(bp, bnx2x_get_leader_lock_resource(bp));
+}
+
+#ifdef BCM_CNIC
+static void bnx2x_cnic_cfc_comp(struct bnx2x *bp, int cid, u8 err);
+#endif
+
+void bnx2x_sp_event(struct bnx2x_fastpath *fp, union eth_rx_cqe *rr_cqe)
+{
+	struct bnx2x *bp = fp->bp;
+	int cid = SW_CID(rr_cqe->ramrod_cqe.conn_and_cmd_data);
+	int command = CQE_CMD(rr_cqe->ramrod_cqe.conn_and_cmd_data);
+	enum bnx2x_queue_cmd drv_cmd = BNX2X_Q_CMD_MAX;
+	struct bnx2x_queue_sp_obj *q_obj = &fp->q_obj;
+
+	DP(BNX2X_MSG_SP,
+	   "fp %d  cid %d  got ramrod #%d  state is %x  type is %d\n",
+	   fp->index, cid, command, bp->state,
+	   rr_cqe->ramrod_cqe.ramrod_type);
+
+	switch (command) {
+	case (RAMROD_CMD_ID_ETH_CLIENT_UPDATE):
+		DP(BNX2X_MSG_SP, "got UPDATE ramrod. CID %d\n", cid);
+		drv_cmd = BNX2X_Q_CMD_UPDATE;
+		break;
+
+	case (RAMROD_CMD_ID_ETH_CLIENT_SETUP):
+		DP(BNX2X_MSG_SP, "got MULTI[%d] setup ramrod\n", cid);
+		drv_cmd = BNX2X_Q_CMD_SETUP;
+		break;
+
+	case (RAMROD_CMD_ID_ETH_TX_QUEUE_SETUP):
+		DP(NETIF_MSG_IFUP, "got MULTI[%d] tx-only setup ramrod\n", cid);
+		drv_cmd = BNX2X_Q_CMD_SETUP_TX_ONLY;
+		break;
+
+	case (RAMROD_CMD_ID_ETH_HALT):
+		DP(BNX2X_MSG_SP, "got MULTI[%d] halt ramrod\n", cid);
+		drv_cmd = BNX2X_Q_CMD_HALT;
+		break;
+
+	case (RAMROD_CMD_ID_ETH_TERMINATE):
+		DP(BNX2X_MSG_SP, "got MULTI[%d] teminate ramrod\n", cid);
+		drv_cmd = BNX2X_Q_CMD_TERMINATE;
+		break;
+
+	case (RAMROD_CMD_ID_ETH_EMPTY):
+		DP(BNX2X_MSG_SP, "got MULTI[%d] empty ramrod\n", cid);
+		drv_cmd = BNX2X_Q_CMD_EMPTY;
+		break;
+
+	default:
+		BNX2X_ERR("unexpected MC reply (%d) on fp[%d]\n",
+			  command, fp->index);
+		return;
+	}
+
+	if ((drv_cmd != BNX2X_Q_CMD_MAX) &&
+	    q_obj->complete_cmd(bp, q_obj, drv_cmd))
+		/* q_obj->complete_cmd() failure means that this was
+		 * an unexpected completion.
+		 *
+		 * In this case we don't want to increase the bp->spq_left
+		 * because apparently we haven't sent this command the first
+		 * place.
+		 */
+#ifdef BNX2X_STOP_ON_ERROR
+		bnx2x_panic();
+#else
+		return;
+#endif
+
+	smp_mb__before_atomic_inc();
+	atomic_inc(&bp->cq_spq_left);
+	/* push the change in bp->spq_left and towards the memory */
+	smp_mb__after_atomic_inc();
+
+	DP(BNX2X_MSG_SP, "bp->cq_spq_left %x\n", atomic_read(&bp->cq_spq_left));
+
+	return;
+}
+
+void bnx2x_update_rx_prod(struct bnx2x *bp, struct bnx2x_fastpath *fp,
+			u16 bd_prod, u16 rx_comp_prod, u16 rx_sge_prod)
+{
+	u32 start = BAR_USTRORM_INTMEM + fp->ustorm_rx_prods_offset;
+
+	bnx2x_update_rx_prod_gen(bp, fp, bd_prod, rx_comp_prod, rx_sge_prod,
+				 start);
+}
+
+irqreturn_t bnx2x_interrupt(int irq, void *dev_instance)
+{
+	struct bnx2x *bp = netdev_priv(dev_instance);
+	u16 status = bnx2x_ack_int(bp);
+	u16 mask;
+	int i;
+	u8 cos;
+
+	/* Return here if interrupt is shared and it's not for us */
+	if (unlikely(status == 0)) {
+		DP(NETIF_MSG_INTR, "not our interrupt!\n");
+		return IRQ_NONE;
+	}
+	DP(NETIF_MSG_INTR, "got an interrupt  status 0x%x\n", status);
+
+#ifdef BNX2X_STOP_ON_ERROR
+	if (unlikely(bp->panic))
+		return IRQ_HANDLED;
+#endif
+
+	for_each_eth_queue(bp, i) {
+		struct bnx2x_fastpath *fp = &bp->fp[i];
+
+		mask = 0x2 << (fp->index + CNIC_PRESENT);
+		if (status & mask) {
+			/* Handle Rx or Tx according to SB id */
+			prefetch(fp->rx_cons_sb);
+			for_each_cos_in_tx_queue(fp, cos)
+				prefetch(fp->txdata[cos].tx_cons_sb);
+			prefetch(&fp->sb_running_index[SM_RX_ID]);
+			napi_schedule(&bnx2x_fp(bp, fp->index, napi));
+			status &= ~mask;
+		}
+	}
+
+#ifdef BCM_CNIC
+	mask = 0x2;
+	if (status & (mask | 0x1)) {
+		struct cnic_ops *c_ops = NULL;
+
+		if (likely(bp->state == BNX2X_STATE_OPEN)) {
+			rcu_read_lock();
+			c_ops = rcu_dereference(bp->cnic_ops);
+			if (c_ops)
+				c_ops->cnic_handler(bp->cnic_data, NULL);
+			rcu_read_unlock();
+		}
+
+		status &= ~mask;
+	}
+#endif
+
+	if (unlikely(status & 0x1)) {
+		queue_delayed_work(bnx2x_wq, &bp->sp_task, 0);
+
+		status &= ~0x1;
+		if (!status)
+			return IRQ_HANDLED;
+	}
+
+	if (unlikely(status))
+		DP(NETIF_MSG_INTR, "got an unknown interrupt! (status 0x%x)\n",
+		   status);
+
+	return IRQ_HANDLED;
+}
+
+/* Link */
+
+/*
+ * General service functions
+ */
+
+int bnx2x_acquire_hw_lock(struct bnx2x *bp, u32 resource)
+{
+	u32 lock_status;
+	u32 resource_bit = (1 << resource);
+	int func = BP_FUNC(bp);
+	u32 hw_lock_control_reg;
+	int cnt;
+
+	/* Validating that the resource is within range */
+	if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
+		DP(NETIF_MSG_HW,
+		   "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
+		   resource, HW_LOCK_MAX_RESOURCE_VALUE);
+		return -EINVAL;
+	}
+
+	if (func <= 5) {
+		hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8);
+	} else {
+		hw_lock_control_reg =
+				(MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8);
+	}
+
+	/* Validating that the resource is not already taken */
+	lock_status = REG_RD(bp, hw_lock_control_reg);
+	if (lock_status & resource_bit) {
+		DP(NETIF_MSG_HW, "lock_status 0x%x  resource_bit 0x%x\n",
+		   lock_status, resource_bit);
+		return -EEXIST;
+	}
+
+	/* Try for 5 second every 5ms */
+	for (cnt = 0; cnt < 1000; cnt++) {
+		/* Try to acquire the lock */
+		REG_WR(bp, hw_lock_control_reg + 4, resource_bit);
+		lock_status = REG_RD(bp, hw_lock_control_reg);
+		if (lock_status & resource_bit)
+			return 0;
+
+		msleep(5);
+	}
+	DP(NETIF_MSG_HW, "Timeout\n");
+	return -EAGAIN;
+}
+
+int bnx2x_release_leader_lock(struct bnx2x *bp)
+{
+	return bnx2x_release_hw_lock(bp, bnx2x_get_leader_lock_resource(bp));
+}
+
+int bnx2x_release_hw_lock(struct bnx2x *bp, u32 resource)
+{
+	u32 lock_status;
+	u32 resource_bit = (1 << resource);
+	int func = BP_FUNC(bp);
+	u32 hw_lock_control_reg;
+
+	DP(NETIF_MSG_HW, "Releasing a lock on resource %d\n", resource);
+
+	/* Validating that the resource is within range */
+	if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
+		DP(NETIF_MSG_HW,
+		   "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
+		   resource, HW_LOCK_MAX_RESOURCE_VALUE);
+		return -EINVAL;
+	}
+
+	if (func <= 5) {
+		hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8);
+	} else {
+		hw_lock_control_reg =
+				(MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8);
+	}
+
+	/* Validating that the resource is currently taken */
+	lock_status = REG_RD(bp, hw_lock_control_reg);
+	if (!(lock_status & resource_bit)) {
+		DP(NETIF_MSG_HW, "lock_status 0x%x  resource_bit 0x%x\n",
+		   lock_status, resource_bit);
+		return -EFAULT;
+	}
+
+	REG_WR(bp, hw_lock_control_reg, resource_bit);
+	return 0;
+}
+
+
+int bnx2x_get_gpio(struct bnx2x *bp, int gpio_num, u8 port)
+{
+	/* The GPIO should be swapped if swap register is set and active */
+	int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) &&
+			 REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port;
+	int gpio_shift = gpio_num +
+			(gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0);
+	u32 gpio_mask = (1 << gpio_shift);
+	u32 gpio_reg;
+	int value;
+
+	if (gpio_num > MISC_REGISTERS_GPIO_3) {
+		BNX2X_ERR("Invalid GPIO %d\n", gpio_num);
+		return -EINVAL;
+	}
+
+	/* read GPIO value */
+	gpio_reg = REG_RD(bp, MISC_REG_GPIO);
+
+	/* get the requested pin value */
+	if ((gpio_reg & gpio_mask) == gpio_mask)
+		value = 1;
+	else
+		value = 0;
+
+	DP(NETIF_MSG_LINK, "pin %d  value 0x%x\n", gpio_num, value);
+
+	return value;
+}
+
+int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port)
+{
+	/* The GPIO should be swapped if swap register is set and active */
+	int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) &&
+			 REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port;
+	int gpio_shift = gpio_num +
+			(gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0);
+	u32 gpio_mask = (1 << gpio_shift);
+	u32 gpio_reg;
+
+	if (gpio_num > MISC_REGISTERS_GPIO_3) {
+		BNX2X_ERR("Invalid GPIO %d\n", gpio_num);
+		return -EINVAL;
+	}
+
+	bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
+	/* read GPIO and mask except the float bits */
+	gpio_reg = (REG_RD(bp, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT);
+
+	switch (mode) {
+	case MISC_REGISTERS_GPIO_OUTPUT_LOW:
+		DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> output low\n",
+		   gpio_num, gpio_shift);
+		/* clear FLOAT and set CLR */
+		gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
+		gpio_reg |=  (gpio_mask << MISC_REGISTERS_GPIO_CLR_POS);
+		break;
+
+	case MISC_REGISTERS_GPIO_OUTPUT_HIGH:
+		DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> output high\n",
+		   gpio_num, gpio_shift);
+		/* clear FLOAT and set SET */
+		gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
+		gpio_reg |=  (gpio_mask << MISC_REGISTERS_GPIO_SET_POS);
+		break;
+
+	case MISC_REGISTERS_GPIO_INPUT_HI_Z:
+		DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> input\n",
+		   gpio_num, gpio_shift);
+		/* set FLOAT */
+		gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
+		break;
+
+	default:
+		break;
+	}
+
+	REG_WR(bp, MISC_REG_GPIO, gpio_reg);
+	bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
+
+	return 0;
+}
+
+int bnx2x_set_mult_gpio(struct bnx2x *bp, u8 pins, u32 mode)
+{
+	u32 gpio_reg = 0;
+	int rc = 0;
+
+	/* Any port swapping should be handled by caller. */
+
+	bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
+	/* read GPIO and mask except the float bits */
+	gpio_reg = REG_RD(bp, MISC_REG_GPIO);
+	gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_FLOAT_POS);
+	gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_CLR_POS);
+	gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_SET_POS);
+
+	switch (mode) {
+	case MISC_REGISTERS_GPIO_OUTPUT_LOW:
+		DP(NETIF_MSG_LINK, "Set GPIO 0x%x -> output low\n", pins);
+		/* set CLR */
+		gpio_reg |= (pins << MISC_REGISTERS_GPIO_CLR_POS);
+		break;
+
+	case MISC_REGISTERS_GPIO_OUTPUT_HIGH:
+		DP(NETIF_MSG_LINK, "Set GPIO 0x%x -> output high\n", pins);
+		/* set SET */
+		gpio_reg |= (pins << MISC_REGISTERS_GPIO_SET_POS);
+		break;
+
+	case MISC_REGISTERS_GPIO_INPUT_HI_Z:
+		DP(NETIF_MSG_LINK, "Set GPIO 0x%x -> input\n", pins);
+		/* set FLOAT */
+		gpio_reg |= (pins << MISC_REGISTERS_GPIO_FLOAT_POS);
+		break;
+
+	default:
+		BNX2X_ERR("Invalid GPIO mode assignment %d\n", mode);
+		rc = -EINVAL;
+		break;
+	}
+
+	if (rc == 0)
+		REG_WR(bp, MISC_REG_GPIO, gpio_reg);
+
+	bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
+
+	return rc;
+}
+
+int bnx2x_set_gpio_int(struct bnx2x *bp, int gpio_num, u32 mode, u8 port)
+{
+	/* The GPIO should be swapped if swap register is set and active */
+	int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) &&
+			 REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port;
+	int gpio_shift = gpio_num +
+			(gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0);
+	u32 gpio_mask = (1 << gpio_shift);
+	u32 gpio_reg;
+
+	if (gpio_num > MISC_REGISTERS_GPIO_3) {
+		BNX2X_ERR("Invalid GPIO %d\n", gpio_num);
+		return -EINVAL;
+	}
+
+	bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
+	/* read GPIO int */
+	gpio_reg = REG_RD(bp, MISC_REG_GPIO_INT);
+
+	switch (mode) {
+	case MISC_REGISTERS_GPIO_INT_OUTPUT_CLR:
+		DP(NETIF_MSG_LINK, "Clear GPIO INT %d (shift %d) -> "
+				   "output low\n", gpio_num, gpio_shift);
+		/* clear SET and set CLR */
+		gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS);
+		gpio_reg |=  (gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS);
+		break;
+
+	case MISC_REGISTERS_GPIO_INT_OUTPUT_SET:
+		DP(NETIF_MSG_LINK, "Set GPIO INT %d (shift %d) -> "
+				   "output high\n", gpio_num, gpio_shift);
+		/* clear CLR and set SET */
+		gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS);
+		gpio_reg |=  (gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS);
+		break;
+
+	default:
+		break;
+	}
+
+	REG_WR(bp, MISC_REG_GPIO_INT, gpio_reg);
+	bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
+
+	return 0;
+}
+
+static int bnx2x_set_spio(struct bnx2x *bp, int spio_num, u32 mode)
+{
+	u32 spio_mask = (1 << spio_num);
+	u32 spio_reg;
+
+	if ((spio_num < MISC_REGISTERS_SPIO_4) ||
+	    (spio_num > MISC_REGISTERS_SPIO_7)) {
+		BNX2X_ERR("Invalid SPIO %d\n", spio_num);
+		return -EINVAL;
+	}
+
+	bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_SPIO);
+	/* read SPIO and mask except the float bits */
+	spio_reg = (REG_RD(bp, MISC_REG_SPIO) & MISC_REGISTERS_SPIO_FLOAT);
+
+	switch (mode) {
+	case MISC_REGISTERS_SPIO_OUTPUT_LOW:
+		DP(NETIF_MSG_LINK, "Set SPIO %d -> output low\n", spio_num);
+		/* clear FLOAT and set CLR */
+		spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
+		spio_reg |=  (spio_mask << MISC_REGISTERS_SPIO_CLR_POS);
+		break;
+
+	case MISC_REGISTERS_SPIO_OUTPUT_HIGH:
+		DP(NETIF_MSG_LINK, "Set SPIO %d -> output high\n", spio_num);
+		/* clear FLOAT and set SET */
+		spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
+		spio_reg |=  (spio_mask << MISC_REGISTERS_SPIO_SET_POS);
+		break;
+
+	case MISC_REGISTERS_SPIO_INPUT_HI_Z:
+		DP(NETIF_MSG_LINK, "Set SPIO %d -> input\n", spio_num);
+		/* set FLOAT */
+		spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
+		break;
+
+	default:
+		break;
+	}
+
+	REG_WR(bp, MISC_REG_SPIO, spio_reg);
+	bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_SPIO);
+
+	return 0;
+}
+
+void bnx2x_calc_fc_adv(struct bnx2x *bp)
+{
+	u8 cfg_idx = bnx2x_get_link_cfg_idx(bp);
+	switch (bp->link_vars.ieee_fc &
+		MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) {
+	case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE:
+		bp->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause |
+						   ADVERTISED_Pause);
+		break;
+
+	case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH:
+		bp->port.advertising[cfg_idx] |= (ADVERTISED_Asym_Pause |
+						  ADVERTISED_Pause);
+		break;
+
+	case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC:
+		bp->port.advertising[cfg_idx] |= ADVERTISED_Asym_Pause;
+		break;
+
+	default:
+		bp->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause |
+						   ADVERTISED_Pause);
+		break;
+	}
+}
+
+u8 bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode)
+{
+	if (!BP_NOMCP(bp)) {
+		u8 rc;
+		int cfx_idx = bnx2x_get_link_cfg_idx(bp);
+		u16 req_line_speed = bp->link_params.req_line_speed[cfx_idx];
+		/*
+		 * Initialize link parameters structure variables
+		 * It is recommended to turn off RX FC for jumbo frames
+		 * for better performance
+		 */
+		if (CHIP_IS_E1x(bp) && (bp->dev->mtu > 5000))
+			bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_TX;
+		else
+			bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_BOTH;
+
+		bnx2x_acquire_phy_lock(bp);
+
+		if (load_mode == LOAD_DIAG) {
+			struct link_params *lp = &bp->link_params;
+			lp->loopback_mode = LOOPBACK_XGXS;
+			/* do PHY loopback at 10G speed, if possible */
+			if (lp->req_line_speed[cfx_idx] < SPEED_10000) {
+				if (lp->speed_cap_mask[cfx_idx] &
+				    PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
+					lp->req_line_speed[cfx_idx] =
+					SPEED_10000;
+				else
+					lp->req_line_speed[cfx_idx] =
+					SPEED_1000;
+			}
+		}
+
+		rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars);
+
+		bnx2x_release_phy_lock(bp);
+
+		bnx2x_calc_fc_adv(bp);
+
+		if (CHIP_REV_IS_SLOW(bp) && bp->link_vars.link_up) {
+			bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP);
+			bnx2x_link_report(bp);
+		} else
+			queue_delayed_work(bnx2x_wq, &bp->period_task, 0);
+		bp->link_params.req_line_speed[cfx_idx] = req_line_speed;
+		return rc;
+	}
+	BNX2X_ERR("Bootcode is missing - can not initialize link\n");
+	return -EINVAL;
+}
+
+void bnx2x_link_set(struct bnx2x *bp)
+{
+	if (!BP_NOMCP(bp)) {
+		bnx2x_acquire_phy_lock(bp);
+		bnx2x_link_reset(&bp->link_params, &bp->link_vars, 1);
+		bnx2x_phy_init(&bp->link_params, &bp->link_vars);
+		bnx2x_release_phy_lock(bp);
+
+		bnx2x_calc_fc_adv(bp);
+	} else
+		BNX2X_ERR("Bootcode is missing - can not set link\n");
+}
+
+static void bnx2x__link_reset(struct bnx2x *bp)
+{
+	if (!BP_NOMCP(bp)) {
+		bnx2x_acquire_phy_lock(bp);
+		bnx2x_link_reset(&bp->link_params, &bp->link_vars, 1);
+		bnx2x_release_phy_lock(bp);
+	} else
+		BNX2X_ERR("Bootcode is missing - can not reset link\n");
+}
+
+u8 bnx2x_link_test(struct bnx2x *bp, u8 is_serdes)
+{
+	u8 rc = 0;
+
+	if (!BP_NOMCP(bp)) {
+		bnx2x_acquire_phy_lock(bp);
+		rc = bnx2x_test_link(&bp->link_params, &bp->link_vars,
+				     is_serdes);
+		bnx2x_release_phy_lock(bp);
+	} else
+		BNX2X_ERR("Bootcode is missing - can not test link\n");
+
+	return rc;
+}
+
+static void bnx2x_init_port_minmax(struct bnx2x *bp)
+{
+	u32 r_param = bp->link_vars.line_speed / 8;
+	u32 fair_periodic_timeout_usec;
+	u32 t_fair;
+
+	memset(&(bp->cmng.rs_vars), 0,
+	       sizeof(struct rate_shaping_vars_per_port));
+	memset(&(bp->cmng.fair_vars), 0, sizeof(struct fairness_vars_per_port));
+
+	/* 100 usec in SDM ticks = 25 since each tick is 4 usec */
+	bp->cmng.rs_vars.rs_periodic_timeout = RS_PERIODIC_TIMEOUT_USEC / 4;
+
+	/* this is the threshold below which no timer arming will occur
+	   1.25 coefficient is for the threshold to be a little bigger
+	   than the real time, to compensate for timer in-accuracy */
+	bp->cmng.rs_vars.rs_threshold =
+				(RS_PERIODIC_TIMEOUT_USEC * r_param * 5) / 4;
+
+	/* resolution of fairness timer */
+	fair_periodic_timeout_usec = QM_ARB_BYTES / r_param;
+	/* for 10G it is 1000usec. for 1G it is 10000usec. */
+	t_fair = T_FAIR_COEF / bp->link_vars.line_speed;
+
+	/* this is the threshold below which we won't arm the timer anymore */
+	bp->cmng.fair_vars.fair_threshold = QM_ARB_BYTES;
+
+	/* we multiply by 1e3/8 to get bytes/msec.
+	   We don't want the credits to pass a credit
+	   of the t_fair*FAIR_MEM (algorithm resolution) */
+	bp->cmng.fair_vars.upper_bound = r_param * t_fair * FAIR_MEM;
+	/* since each tick is 4 usec */
+	bp->cmng.fair_vars.fairness_timeout = fair_periodic_timeout_usec / 4;
+}
+
+/* Calculates the sum of vn_min_rates.
+   It's needed for further normalizing of the min_rates.
+   Returns:
+     sum of vn_min_rates.
+       or
+     0 - if all the min_rates are 0.
+     In the later case fainess algorithm should be deactivated.
+     If not all min_rates are zero then those that are zeroes will be set to 1.
+ */
+static void bnx2x_calc_vn_weight_sum(struct bnx2x *bp)
+{
+	int all_zero = 1;
+	int vn;
+
+	bp->vn_weight_sum = 0;
+	for (vn = VN_0; vn < E1HVN_MAX; vn++) {
+		u32 vn_cfg = bp->mf_config[vn];
+		u32 vn_min_rate = ((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >>
+				   FUNC_MF_CFG_MIN_BW_SHIFT) * 100;
+
+		/* Skip hidden vns */
+		if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE)
+			continue;
+
+		/* If min rate is zero - set it to 1 */
+		if (!vn_min_rate)
+			vn_min_rate = DEF_MIN_RATE;
+		else
+			all_zero = 0;
+
+		bp->vn_weight_sum += vn_min_rate;
+	}
+
+	/* if ETS or all min rates are zeros - disable fairness */
+	if (BNX2X_IS_ETS_ENABLED(bp)) {
+		bp->cmng.flags.cmng_enables &=
+					~CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
+		DP(NETIF_MSG_IFUP, "Fairness will be disabled due to ETS\n");
+	} else if (all_zero) {
+		bp->cmng.flags.cmng_enables &=
+					~CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
+		DP(NETIF_MSG_IFUP, "All MIN values are zeroes"
+		   "  fairness will be disabled\n");
+	} else
+		bp->cmng.flags.cmng_enables |=
+					CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
+}
+
+static void bnx2x_init_vn_minmax(struct bnx2x *bp, int vn)
+{
+	struct rate_shaping_vars_per_vn m_rs_vn;
+	struct fairness_vars_per_vn m_fair_vn;
+	u32 vn_cfg = bp->mf_config[vn];
+	int func = 2*vn + BP_PORT(bp);
+	u16 vn_min_rate, vn_max_rate;
+	int i;
+
+	/* If function is hidden - set min and max to zeroes */
+	if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE) {
+		vn_min_rate = 0;
+		vn_max_rate = 0;
+
+	} else {
+		u32 maxCfg = bnx2x_extract_max_cfg(bp, vn_cfg);
+
+		vn_min_rate = ((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >>
+				FUNC_MF_CFG_MIN_BW_SHIFT) * 100;
+		/* If fairness is enabled (not all min rates are zeroes) and
+		   if current min rate is zero - set it to 1.
+		   This is a requirement of the algorithm. */
+		if (bp->vn_weight_sum && (vn_min_rate == 0))
+			vn_min_rate = DEF_MIN_RATE;
+
+		if (IS_MF_SI(bp))
+			/* maxCfg in percents of linkspeed */
+			vn_max_rate = (bp->link_vars.line_speed * maxCfg) / 100;
+		else
+			/* maxCfg is absolute in 100Mb units */
+			vn_max_rate = maxCfg * 100;
+	}
+
+	DP(NETIF_MSG_IFUP,
+	   "func %d: vn_min_rate %d  vn_max_rate %d  vn_weight_sum %d\n",
+	   func, vn_min_rate, vn_max_rate, bp->vn_weight_sum);
+
+	memset(&m_rs_vn, 0, sizeof(struct rate_shaping_vars_per_vn));
+	memset(&m_fair_vn, 0, sizeof(struct fairness_vars_per_vn));
+
+	/* global vn counter - maximal Mbps for this vn */
+	m_rs_vn.vn_counter.rate = vn_max_rate;
+
+	/* quota - number of bytes transmitted in this period */
+	m_rs_vn.vn_counter.quota =
+				(vn_max_rate * RS_PERIODIC_TIMEOUT_USEC) / 8;
+
+	if (bp->vn_weight_sum) {
+		/* credit for each period of the fairness algorithm:
+		   number of bytes in T_FAIR (the vn share the port rate).
+		   vn_weight_sum should not be larger than 10000, thus
+		   T_FAIR_COEF / (8 * vn_weight_sum) will always be greater
+		   than zero */
+		m_fair_vn.vn_credit_delta =
+			max_t(u32, (vn_min_rate * (T_FAIR_COEF /
+						   (8 * bp->vn_weight_sum))),
+			      (bp->cmng.fair_vars.fair_threshold +
+							MIN_ABOVE_THRESH));
+		DP(NETIF_MSG_IFUP, "m_fair_vn.vn_credit_delta %d\n",
+		   m_fair_vn.vn_credit_delta);
+	}
+
+	/* Store it to internal memory */
+	for (i = 0; i < sizeof(struct rate_shaping_vars_per_vn)/4; i++)
+		REG_WR(bp, BAR_XSTRORM_INTMEM +
+		       XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(func) + i * 4,
+		       ((u32 *)(&m_rs_vn))[i]);
+
+	for (i = 0; i < sizeof(struct fairness_vars_per_vn)/4; i++)
+		REG_WR(bp, BAR_XSTRORM_INTMEM +
+		       XSTORM_FAIRNESS_PER_VN_VARS_OFFSET(func) + i * 4,
+		       ((u32 *)(&m_fair_vn))[i]);
+}
+
+static int bnx2x_get_cmng_fns_mode(struct bnx2x *bp)
+{
+	if (CHIP_REV_IS_SLOW(bp))
+		return CMNG_FNS_NONE;
+	if (IS_MF(bp))
+		return CMNG_FNS_MINMAX;
+
+	return CMNG_FNS_NONE;
+}
+
+void bnx2x_read_mf_cfg(struct bnx2x *bp)
+{
+	int vn, n = (CHIP_MODE_IS_4_PORT(bp) ? 2 : 1);
+
+	if (BP_NOMCP(bp))
+		return; /* what should be the default bvalue in this case */
+
+	/* For 2 port configuration the absolute function number formula
+	 * is:
+	 *      abs_func = 2 * vn + BP_PORT + BP_PATH
+	 *
+	 *      and there are 4 functions per port
+	 *
+	 * For 4 port configuration it is
+	 *      abs_func = 4 * vn + 2 * BP_PORT + BP_PATH
+	 *
+	 *      and there are 2 functions per port
+	 */
+	for (vn = VN_0; vn < E1HVN_MAX; vn++) {
+		int /*abs*/func = n * (2 * vn + BP_PORT(bp)) + BP_PATH(bp);
+
+		if (func >= E1H_FUNC_MAX)
+			break;
+
+		bp->mf_config[vn] =
+			MF_CFG_RD(bp, func_mf_config[func].config);
+	}
+}
+
+static void bnx2x_cmng_fns_init(struct bnx2x *bp, u8 read_cfg, u8 cmng_type)
+{
+
+	if (cmng_type == CMNG_FNS_MINMAX) {
+		int vn;
+
+		/* clear cmng_enables */
+		bp->cmng.flags.cmng_enables = 0;
+
+		/* read mf conf from shmem */
+		if (read_cfg)
+			bnx2x_read_mf_cfg(bp);
+
+		/* Init rate shaping and fairness contexts */
+		bnx2x_init_port_minmax(bp);
+
+		/* vn_weight_sum and enable fairness if not 0 */
+		bnx2x_calc_vn_weight_sum(bp);
+
+		/* calculate and set min-max rate for each vn */
+		if (bp->port.pmf)
+			for (vn = VN_0; vn < E1HVN_MAX; vn++)
+				bnx2x_init_vn_minmax(bp, vn);
+
+		/* always enable rate shaping and fairness */
+		bp->cmng.flags.cmng_enables |=
+					CMNG_FLAGS_PER_PORT_RATE_SHAPING_VN;
+		if (!bp->vn_weight_sum)
+			DP(NETIF_MSG_IFUP, "All MIN values are zeroes"
+				   "  fairness will be disabled\n");
+		return;
+	}
+
+	/* rate shaping and fairness are disabled */
+	DP(NETIF_MSG_IFUP,
+	   "rate shaping and fairness are disabled\n");
+}
+
+static inline void bnx2x_link_sync_notify(struct bnx2x *bp)
+{
+	int port = BP_PORT(bp);
+	int func;
+	int vn;
+
+	/* Set the attention towards other drivers on the same port */
+	for (vn = VN_0; vn < E1HVN_MAX; vn++) {
+		if (vn == BP_E1HVN(bp))
+			continue;
+
+		func = ((vn << 1) | port);
+		REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_0 +
+		       (LINK_SYNC_ATTENTION_BIT_FUNC_0 + func)*4, 1);
+	}
+}
+
+/* This function is called upon link interrupt */
+static void bnx2x_link_attn(struct bnx2x *bp)
+{
+	/* Make sure that we are synced with the current statistics */
+	bnx2x_stats_handle(bp, STATS_EVENT_STOP);
+
+	bnx2x_link_update(&bp->link_params, &bp->link_vars);
+
+	if (bp->link_vars.link_up) {
+
+		/* dropless flow control */
+		if (!CHIP_IS_E1(bp) && bp->dropless_fc) {
+			int port = BP_PORT(bp);
+			u32 pause_enabled = 0;
+
+			if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX)
+				pause_enabled = 1;
+
+			REG_WR(bp, BAR_USTRORM_INTMEM +
+			       USTORM_ETH_PAUSE_ENABLED_OFFSET(port),
+			       pause_enabled);
+		}
+
+		if (bp->link_vars.mac_type != MAC_TYPE_EMAC) {
+			struct host_port_stats *pstats;
+
+			pstats = bnx2x_sp(bp, port_stats);
+			/* reset old mac stats */
+			memset(&(pstats->mac_stx[0]), 0,
+			       sizeof(struct mac_stx));
+		}
+		if (bp->state == BNX2X_STATE_OPEN)
+			bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP);
+	}
+
+	if (bp->link_vars.link_up && bp->link_vars.line_speed) {
+		int cmng_fns = bnx2x_get_cmng_fns_mode(bp);
+
+		if (cmng_fns != CMNG_FNS_NONE) {
+			bnx2x_cmng_fns_init(bp, false, cmng_fns);
+			storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp));
+		} else
+			/* rate shaping and fairness are disabled */
+			DP(NETIF_MSG_IFUP,
+			   "single function mode without fairness\n");
+	}
+
+	__bnx2x_link_report(bp);
+
+	if (IS_MF(bp))
+		bnx2x_link_sync_notify(bp);
+}
+
+void bnx2x__link_status_update(struct bnx2x *bp)
+{
+	if (bp->state != BNX2X_STATE_OPEN)
+		return;
+
+	bnx2x_link_status_update(&bp->link_params, &bp->link_vars);
+
+	if (bp->link_vars.link_up)
+		bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP);
+	else
+		bnx2x_stats_handle(bp, STATS_EVENT_STOP);
+
+	/* indicate link status */
+	bnx2x_link_report(bp);
+}
+
+static void bnx2x_pmf_update(struct bnx2x *bp)
+{
+	int port = BP_PORT(bp);
+	u32 val;
+
+	bp->port.pmf = 1;
+	DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf);
+
+	/*
+	 * We need the mb() to ensure the ordering between the writing to
+	 * bp->port.pmf here and reading it from the bnx2x_periodic_task().
+	 */
+	smp_mb();
+
+	/* queue a periodic task */
+	queue_delayed_work(bnx2x_wq, &bp->period_task, 0);
+
+	bnx2x_dcbx_pmf_update(bp);
+
+	/* enable nig attention */
+	val = (0xff0f | (1 << (BP_E1HVN(bp) + 4)));
+	if (bp->common.int_block == INT_BLOCK_HC) {
+		REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, val);
+		REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, val);
+	} else if (!CHIP_IS_E1x(bp)) {
+		REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, val);
+		REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, val);
+	}
+
+	bnx2x_stats_handle(bp, STATS_EVENT_PMF);
+}
+
+/* end of Link */
+
+/* slow path */
+
+/*
+ * General service functions
+ */
+
+/* send the MCP a request, block until there is a reply */
+u32 bnx2x_fw_command(struct bnx2x *bp, u32 command, u32 param)
+{
+	int mb_idx = BP_FW_MB_IDX(bp);
+	u32 seq;
+	u32 rc = 0;
+	u32 cnt = 1;
+	u8 delay = CHIP_REV_IS_SLOW(bp) ? 100 : 10;
+
+	mutex_lock(&bp->fw_mb_mutex);
+	seq = ++bp->fw_seq;
+	SHMEM_WR(bp, func_mb[mb_idx].drv_mb_param, param);
+	SHMEM_WR(bp, func_mb[mb_idx].drv_mb_header, (command | seq));
+
+	DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB param 0x%08x\n",
+			(command | seq), param);
+
+	do {
+		/* let the FW do it's magic ... */
+		msleep(delay);
+
+		rc = SHMEM_RD(bp, func_mb[mb_idx].fw_mb_header);
+
+		/* Give the FW up to 5 second (500*10ms) */
+	} while ((seq != (rc & FW_MSG_SEQ_NUMBER_MASK)) && (cnt++ < 500));
+
+	DP(BNX2X_MSG_MCP, "[after %d ms] read (%x) seq is (%x) from FW MB\n",
+	   cnt*delay, rc, seq);
+
+	/* is this a reply to our command? */
+	if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK))
+		rc &= FW_MSG_CODE_MASK;
+	else {
+		/* FW BUG! */
+		BNX2X_ERR("FW failed to respond!\n");
+		bnx2x_fw_dump(bp);
+		rc = 0;
+	}
+	mutex_unlock(&bp->fw_mb_mutex);
+
+	return rc;
+}
+
+static u8 stat_counter_valid(struct bnx2x *bp, struct bnx2x_fastpath *fp)
+{
+#ifdef BCM_CNIC
+	/* Statistics are not supported for CNIC Clients at the moment */
+	if (IS_FCOE_FP(fp))
+		return false;
+#endif
+	return true;
+}
+
+void bnx2x_func_init(struct bnx2x *bp, struct bnx2x_func_init_params *p)
+{
+	if (CHIP_IS_E1x(bp)) {
+		struct tstorm_eth_function_common_config tcfg = {0};
+
+		storm_memset_func_cfg(bp, &tcfg, p->func_id);
+	}
+
+	/* Enable the function in the FW */
+	storm_memset_vf_to_pf(bp, p->func_id, p->pf_id);
+	storm_memset_func_en(bp, p->func_id, 1);
+
+	/* spq */
+	if (p->func_flgs & FUNC_FLG_SPQ) {
+		storm_memset_spq_addr(bp, p->spq_map, p->func_id);
+		REG_WR(bp, XSEM_REG_FAST_MEMORY +
+		       XSTORM_SPQ_PROD_OFFSET(p->func_id), p->spq_prod);
+	}
+}
+
+/**
+ * bnx2x_get_tx_only_flags - Return common flags
+ *
+ * @bp		device handle
+ * @fp		queue handle
+ * @zero_stats	TRUE if statistics zeroing is needed
+ *
+ * Return the flags that are common for the Tx-only and not normal connections.
+ */
+static inline unsigned long bnx2x_get_common_flags(struct bnx2x *bp,
+						   struct bnx2x_fastpath *fp,
+						   bool zero_stats)
+{
+	unsigned long flags = 0;
+
+	/* PF driver will always initialize the Queue to an ACTIVE state */
+	__set_bit(BNX2X_Q_FLG_ACTIVE, &flags);
+
+	/* tx only connections collect statistics (on the same index as the
+	 *  parent connection). The statistics are zeroed when the parent
+	 *  connection is initialized.
+	 */
+	if (stat_counter_valid(bp, fp)) {
+		__set_bit(BNX2X_Q_FLG_STATS, &flags);
+		if (zero_stats)
+			__set_bit(BNX2X_Q_FLG_ZERO_STATS, &flags);
+	}
+
+	return flags;
+}
+
+static inline unsigned long bnx2x_get_q_flags(struct bnx2x *bp,
+					      struct bnx2x_fastpath *fp,
+					      bool leading)
+{
+	unsigned long flags = 0;
+
+	/* calculate other queue flags */
+	if (IS_MF_SD(bp))
+		__set_bit(BNX2X_Q_FLG_OV, &flags);
+
+	if (IS_FCOE_FP(fp))
+		__set_bit(BNX2X_Q_FLG_FCOE, &flags);
+
+	if (!fp->disable_tpa) {
+		__set_bit(BNX2X_Q_FLG_TPA, &flags);
+		__set_bit(BNX2X_Q_FLG_TPA_IPV6, &flags);
+	}
+
+	if (leading) {
+		__set_bit(BNX2X_Q_FLG_LEADING_RSS, &flags);
+		__set_bit(BNX2X_Q_FLG_MCAST, &flags);
+	}
+
+	/* Always set HW VLAN stripping */
+	__set_bit(BNX2X_Q_FLG_VLAN, &flags);
+
+
+	return flags | bnx2x_get_common_flags(bp, fp, true);
+}
+
+static void bnx2x_pf_q_prep_general(struct bnx2x *bp,
+	struct bnx2x_fastpath *fp, struct bnx2x_general_setup_params *gen_init,
+	u8 cos)
+{
+	gen_init->stat_id = bnx2x_stats_id(fp);
+	gen_init->spcl_id = fp->cl_id;
+
+	/* Always use mini-jumbo MTU for FCoE L2 ring */
+	if (IS_FCOE_FP(fp))
+		gen_init->mtu = BNX2X_FCOE_MINI_JUMBO_MTU;
+	else
+		gen_init->mtu = bp->dev->mtu;
+
+	gen_init->cos = cos;
+}
+
+static void bnx2x_pf_rx_q_prep(struct bnx2x *bp,
+	struct bnx2x_fastpath *fp, struct rxq_pause_params *pause,
+	struct bnx2x_rxq_setup_params *rxq_init)
+{
+	u8 max_sge = 0;
+	u16 sge_sz = 0;
+	u16 tpa_agg_size = 0;
+
+	if (!fp->disable_tpa) {
+		pause->sge_th_hi = 250;
+		pause->sge_th_lo = 150;
+		tpa_agg_size = min_t(u32,
+			(min_t(u32, 8, MAX_SKB_FRAGS) *
+			SGE_PAGE_SIZE * PAGES_PER_SGE), 0xffff);
+		max_sge = SGE_PAGE_ALIGN(bp->dev->mtu) >>
+			SGE_PAGE_SHIFT;
+		max_sge = ((max_sge + PAGES_PER_SGE - 1) &
+			  (~(PAGES_PER_SGE-1))) >> PAGES_PER_SGE_SHIFT;
+		sge_sz = (u16)min_t(u32, SGE_PAGE_SIZE * PAGES_PER_SGE,
+				    0xffff);
+	}
+
+	/* pause - not for e1 */
+	if (!CHIP_IS_E1(bp)) {
+		pause->bd_th_hi = 350;
+		pause->bd_th_lo = 250;
+		pause->rcq_th_hi = 350;
+		pause->rcq_th_lo = 250;
+
+		pause->pri_map = 1;
+	}
+
+	/* rxq setup */
+	rxq_init->dscr_map = fp->rx_desc_mapping;
+	rxq_init->sge_map = fp->rx_sge_mapping;
+	rxq_init->rcq_map = fp->rx_comp_mapping;
+	rxq_init->rcq_np_map = fp->rx_comp_mapping + BCM_PAGE_SIZE;
+
+	/* This should be a maximum number of data bytes that may be
+	 * placed on the BD (not including paddings).
+	 */
+	rxq_init->buf_sz = fp->rx_buf_size - BNX2X_FW_RX_ALIGN -
+		IP_HEADER_ALIGNMENT_PADDING;
+
+	rxq_init->cl_qzone_id = fp->cl_qzone_id;
+	rxq_init->tpa_agg_sz = tpa_agg_size;
+	rxq_init->sge_buf_sz = sge_sz;
+	rxq_init->max_sges_pkt = max_sge;
+	rxq_init->rss_engine_id = BP_FUNC(bp);
+
+	/* Maximum number or simultaneous TPA aggregation for this Queue.
+	 *
+	 * For PF Clients it should be the maximum avaliable number.
+	 * VF driver(s) may want to define it to a smaller value.
+	 */
+	rxq_init->max_tpa_queues =
+		(CHIP_IS_E1(bp) ? ETH_MAX_AGGREGATION_QUEUES_E1 :
+		ETH_MAX_AGGREGATION_QUEUES_E1H_E2);
+
+	rxq_init->cache_line_log = BNX2X_RX_ALIGN_SHIFT;
+	rxq_init->fw_sb_id = fp->fw_sb_id;
+
+	if (IS_FCOE_FP(fp))
+		rxq_init->sb_cq_index = HC_SP_INDEX_ETH_FCOE_RX_CQ_CONS;
+	else
+		rxq_init->sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS;
+}
+
+static void bnx2x_pf_tx_q_prep(struct bnx2x *bp,
+	struct bnx2x_fastpath *fp, struct bnx2x_txq_setup_params *txq_init,
+	u8 cos)
+{
+	txq_init->dscr_map = fp->txdata[cos].tx_desc_mapping;
+	txq_init->sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS + cos;
+	txq_init->traffic_type = LLFC_TRAFFIC_TYPE_NW;
+	txq_init->fw_sb_id = fp->fw_sb_id;
+
+	/*
+	 * set the tss leading client id for TX classfication ==
+	 * leading RSS client id
+	 */
+	txq_init->tss_leading_cl_id = bnx2x_fp(bp, 0, cl_id);
+
+	if (IS_FCOE_FP(fp)) {
+		txq_init->sb_cq_index = HC_SP_INDEX_ETH_FCOE_TX_CQ_CONS;
+		txq_init->traffic_type = LLFC_TRAFFIC_TYPE_FCOE;
+	}
+}
+
+static void bnx2x_pf_init(struct bnx2x *bp)
+{
+	struct bnx2x_func_init_params func_init = {0};
+	struct event_ring_data eq_data = { {0} };
+	u16 flags;
+
+	if (!CHIP_IS_E1x(bp)) {
+		/* reset IGU PF statistics: MSIX + ATTN */
+		/* PF */
+		REG_WR(bp, IGU_REG_STATISTIC_NUM_MESSAGE_SENT +
+			   BNX2X_IGU_STAS_MSG_VF_CNT*4 +
+			   (CHIP_MODE_IS_4_PORT(bp) ?
+				BP_FUNC(bp) : BP_VN(bp))*4, 0);
+		/* ATTN */
+		REG_WR(bp, IGU_REG_STATISTIC_NUM_MESSAGE_SENT +
+			   BNX2X_IGU_STAS_MSG_VF_CNT*4 +
+			   BNX2X_IGU_STAS_MSG_PF_CNT*4 +
+			   (CHIP_MODE_IS_4_PORT(bp) ?
+				BP_FUNC(bp) : BP_VN(bp))*4, 0);
+	}
+
+	/* function setup flags */
+	flags = (FUNC_FLG_STATS | FUNC_FLG_LEADING | FUNC_FLG_SPQ);
+
+	/* This flag is relevant for E1x only.
+	 * E2 doesn't have a TPA configuration in a function level.
+	 */
+	flags |= (bp->flags & TPA_ENABLE_FLAG) ? FUNC_FLG_TPA : 0;
+
+	func_init.func_flgs = flags;
+	func_init.pf_id = BP_FUNC(bp);
+	func_init.func_id = BP_FUNC(bp);
+	func_init.spq_map = bp->spq_mapping;
+	func_init.spq_prod = bp->spq_prod_idx;
+
+	bnx2x_func_init(bp, &func_init);
+
+	memset(&(bp->cmng), 0, sizeof(struct cmng_struct_per_port));
+
+	/*
+	 * Congestion management values depend on the link rate
+	 * There is no active link so initial link rate is set to 10 Gbps.
+	 * When the link comes up The congestion management values are
+	 * re-calculated according to the actual link rate.
+	 */
+	bp->link_vars.line_speed = SPEED_10000;
+	bnx2x_cmng_fns_init(bp, true, bnx2x_get_cmng_fns_mode(bp));
+
+	/* Only the PMF sets the HW */
+	if (bp->port.pmf)
+		storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp));
+
+	/* init Event Queue */
+	eq_data.base_addr.hi = U64_HI(bp->eq_mapping);
+	eq_data.base_addr.lo = U64_LO(bp->eq_mapping);
+	eq_data.producer = bp->eq_prod;
+	eq_data.index_id = HC_SP_INDEX_EQ_CONS;
+	eq_data.sb_id = DEF_SB_ID;
+	storm_memset_eq_data(bp, &eq_data, BP_FUNC(bp));
+}
+
+
+static void bnx2x_e1h_disable(struct bnx2x *bp)
+{
+	int port = BP_PORT(bp);
+
+	bnx2x_tx_disable(bp);
+
+	REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0);
+}
+
+static void bnx2x_e1h_enable(struct bnx2x *bp)
+{
+	int port = BP_PORT(bp);
+
+	REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 1);
+
+	/* Tx queue should be only reenabled */
+	netif_tx_wake_all_queues(bp->dev);
+
+	/*
+	 * Should not call netif_carrier_on since it will be called if the link
+	 * is up when checking for link state
+	 */
+}
+
+/* called due to MCP event (on pmf):
+ *	reread new bandwidth configuration
+ *	configure FW
+ *	notify others function about the change
+ */
+static inline void bnx2x_config_mf_bw(struct bnx2x *bp)
+{
+	if (bp->link_vars.link_up) {
+		bnx2x_cmng_fns_init(bp, true, CMNG_FNS_MINMAX);
+		bnx2x_link_sync_notify(bp);
+	}
+	storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp));
+}
+
+static inline void bnx2x_set_mf_bw(struct bnx2x *bp)
+{
+	bnx2x_config_mf_bw(bp);
+	bnx2x_fw_command(bp, DRV_MSG_CODE_SET_MF_BW_ACK, 0);
+}
+
+static void bnx2x_dcc_event(struct bnx2x *bp, u32 dcc_event)
+{
+	DP(BNX2X_MSG_MCP, "dcc_event 0x%x\n", dcc_event);
+
+	if (dcc_event & DRV_STATUS_DCC_DISABLE_ENABLE_PF) {
+
+		/*
+		 * This is the only place besides the function initialization
+		 * where the bp->flags can change so it is done without any
+		 * locks
+		 */
+		if (bp->mf_config[BP_VN(bp)] & FUNC_MF_CFG_FUNC_DISABLED) {
+			DP(NETIF_MSG_IFDOWN, "mf_cfg function disabled\n");
+			bp->flags |= MF_FUNC_DIS;
+
+			bnx2x_e1h_disable(bp);
+		} else {
+			DP(NETIF_MSG_IFUP, "mf_cfg function enabled\n");
+			bp->flags &= ~MF_FUNC_DIS;
+
+			bnx2x_e1h_enable(bp);
+		}
+		dcc_event &= ~DRV_STATUS_DCC_DISABLE_ENABLE_PF;
+	}
+	if (dcc_event & DRV_STATUS_DCC_BANDWIDTH_ALLOCATION) {
+		bnx2x_config_mf_bw(bp);
+		dcc_event &= ~DRV_STATUS_DCC_BANDWIDTH_ALLOCATION;
+	}
+
+	/* Report results to MCP */
+	if (dcc_event)
+		bnx2x_fw_command(bp, DRV_MSG_CODE_DCC_FAILURE, 0);
+	else
+		bnx2x_fw_command(bp, DRV_MSG_CODE_DCC_OK, 0);
+}
+
+/* must be called under the spq lock */
+static inline struct eth_spe *bnx2x_sp_get_next(struct bnx2x *bp)
+{
+	struct eth_spe *next_spe = bp->spq_prod_bd;
+
+	if (bp->spq_prod_bd == bp->spq_last_bd) {
+		bp->spq_prod_bd = bp->spq;
+		bp->spq_prod_idx = 0;
+		DP(NETIF_MSG_TIMER, "end of spq\n");
+	} else {
+		bp->spq_prod_bd++;
+		bp->spq_prod_idx++;
+	}
+	return next_spe;
+}
+
+/* must be called under the spq lock */
+static inline void bnx2x_sp_prod_update(struct bnx2x *bp)
+{
+	int func = BP_FUNC(bp);
+
+	/*
+	 * Make sure that BD data is updated before writing the producer:
+	 * BD data is written to the memory, the producer is read from the
+	 * memory, thus we need a full memory barrier to ensure the ordering.
+	 */
+	mb();
+
+	REG_WR16(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_PROD_OFFSET(func),
+		 bp->spq_prod_idx);
+	mmiowb();
+}
+
+/**
+ * bnx2x_is_contextless_ramrod - check if the current command ends on EQ
+ *
+ * @cmd:	command to check
+ * @cmd_type:	command type
+ */
+static inline bool bnx2x_is_contextless_ramrod(int cmd, int cmd_type)
+{
+	if ((cmd_type == NONE_CONNECTION_TYPE) ||
+	    (cmd == RAMROD_CMD_ID_ETH_FORWARD_SETUP) ||
+	    (cmd == RAMROD_CMD_ID_ETH_CLASSIFICATION_RULES) ||
+	    (cmd == RAMROD_CMD_ID_ETH_FILTER_RULES) ||
+	    (cmd == RAMROD_CMD_ID_ETH_MULTICAST_RULES) ||
+	    (cmd == RAMROD_CMD_ID_ETH_SET_MAC) ||
+	    (cmd == RAMROD_CMD_ID_ETH_RSS_UPDATE))
+		return true;
+	else
+		return false;
+
+}
+
+
+/**
+ * bnx2x_sp_post - place a single command on an SP ring
+ *
+ * @bp:		driver handle
+ * @command:	command to place (e.g. SETUP, FILTER_RULES, etc.)
+ * @cid:	SW CID the command is related to
+ * @data_hi:	command private data address (high 32 bits)
+ * @data_lo:	command private data address (low 32 bits)
+ * @cmd_type:	command type (e.g. NONE, ETH)
+ *
+ * SP data is handled as if it's always an address pair, thus data fields are
+ * not swapped to little endian in upper functions. Instead this function swaps
+ * data as if it's two u32 fields.
+ */
+int bnx2x_sp_post(struct bnx2x *bp, int command, int cid,
+		  u32 data_hi, u32 data_lo, int cmd_type)
+{
+	struct eth_spe *spe;
+	u16 type;
+	bool common = bnx2x_is_contextless_ramrod(command, cmd_type);
+
+#ifdef BNX2X_STOP_ON_ERROR
+	if (unlikely(bp->panic))
+		return -EIO;
+#endif
+
+	spin_lock_bh(&bp->spq_lock);
+
+	if (common) {
+		if (!atomic_read(&bp->eq_spq_left)) {
+			BNX2X_ERR("BUG! EQ ring full!\n");
+			spin_unlock_bh(&bp->spq_lock);
+			bnx2x_panic();
+			return -EBUSY;
+		}
+	} else if (!atomic_read(&bp->cq_spq_left)) {
+			BNX2X_ERR("BUG! SPQ ring full!\n");
+			spin_unlock_bh(&bp->spq_lock);
+			bnx2x_panic();
+			return -EBUSY;
+	}
+
+	spe = bnx2x_sp_get_next(bp);
+
+	/* CID needs port number to be encoded int it */
+	spe->hdr.conn_and_cmd_data =
+			cpu_to_le32((command << SPE_HDR_CMD_ID_SHIFT) |
+				    HW_CID(bp, cid));
+
+	type = (cmd_type << SPE_HDR_CONN_TYPE_SHIFT) & SPE_HDR_CONN_TYPE;
+
+	type |= ((BP_FUNC(bp) << SPE_HDR_FUNCTION_ID_SHIFT) &
+		 SPE_HDR_FUNCTION_ID);
+
+	spe->hdr.type = cpu_to_le16(type);
+
+	spe->data.update_data_addr.hi = cpu_to_le32(data_hi);
+	spe->data.update_data_addr.lo = cpu_to_le32(data_lo);
+
+	/*
+	 * It's ok if the actual decrement is issued towards the memory
+	 * somewhere between the spin_lock and spin_unlock. Thus no
+	 * more explict memory barrier is needed.
+	 */
+	if (common)
+		atomic_dec(&bp->eq_spq_left);
+	else
+		atomic_dec(&bp->cq_spq_left);
+
+
+	DP(BNX2X_MSG_SP/*NETIF_MSG_TIMER*/,
+	   "SPQE[%x] (%x:%x)  (cmd, common?) (%d,%d)  hw_cid %x  data (%x:%x) "
+	   "type(0x%x) left (CQ, EQ) (%x,%x)\n",
+	   bp->spq_prod_idx, (u32)U64_HI(bp->spq_mapping),
+	   (u32)(U64_LO(bp->spq_mapping) +
+	   (void *)bp->spq_prod_bd - (void *)bp->spq), command, common,
+	   HW_CID(bp, cid), data_hi, data_lo, type,
+	   atomic_read(&bp->cq_spq_left), atomic_read(&bp->eq_spq_left));
+
+	bnx2x_sp_prod_update(bp);
+	spin_unlock_bh(&bp->spq_lock);
+	return 0;
+}
+
+/* acquire split MCP access lock register */
+static int bnx2x_acquire_alr(struct bnx2x *bp)
+{
+	u32 j, val;
+	int rc = 0;
+
+	might_sleep();
+	for (j = 0; j < 1000; j++) {
+		val = (1UL << 31);
+		REG_WR(bp, GRCBASE_MCP + 0x9c, val);
+		val = REG_RD(bp, GRCBASE_MCP + 0x9c);
+		if (val & (1L << 31))
+			break;
+
+		msleep(5);
+	}
+	if (!(val & (1L << 31))) {
+		BNX2X_ERR("Cannot acquire MCP access lock register\n");
+		rc = -EBUSY;
+	}
+
+	return rc;
+}
+
+/* release split MCP access lock register */
+static void bnx2x_release_alr(struct bnx2x *bp)
+{
+	REG_WR(bp, GRCBASE_MCP + 0x9c, 0);
+}
+
+#define BNX2X_DEF_SB_ATT_IDX	0x0001
+#define BNX2X_DEF_SB_IDX	0x0002
+
+static inline u16 bnx2x_update_dsb_idx(struct bnx2x *bp)
+{
+	struct host_sp_status_block *def_sb = bp->def_status_blk;
+	u16 rc = 0;
+
+	barrier(); /* status block is written to by the chip */
+	if (bp->def_att_idx != def_sb->atten_status_block.attn_bits_index) {
+		bp->def_att_idx = def_sb->atten_status_block.attn_bits_index;
+		rc |= BNX2X_DEF_SB_ATT_IDX;
+	}
+
+	if (bp->def_idx != def_sb->sp_sb.running_index) {
+		bp->def_idx = def_sb->sp_sb.running_index;
+		rc |= BNX2X_DEF_SB_IDX;
+	}
+
+	/* Do not reorder: indecies reading should complete before handling */
+	barrier();
+	return rc;
+}
+
+/*
+ * slow path service functions
+ */
+
+static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
+{
+	int port = BP_PORT(bp);
+	u32 aeu_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
+			      MISC_REG_AEU_MASK_ATTN_FUNC_0;
+	u32 nig_int_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 :
+				       NIG_REG_MASK_INTERRUPT_PORT0;
+	u32 aeu_mask;
+	u32 nig_mask = 0;
+	u32 reg_addr;
+
+	if (bp->attn_state & asserted)
+		BNX2X_ERR("IGU ERROR\n");
+
+	bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
+	aeu_mask = REG_RD(bp, aeu_addr);
+
+	DP(NETIF_MSG_HW, "aeu_mask %x  newly asserted %x\n",
+	   aeu_mask, asserted);
+	aeu_mask &= ~(asserted & 0x3ff);
+	DP(NETIF_MSG_HW, "new mask %x\n", aeu_mask);
+
+	REG_WR(bp, aeu_addr, aeu_mask);
+	bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
+
+	DP(NETIF_MSG_HW, "attn_state %x\n", bp->attn_state);
+	bp->attn_state |= asserted;
+	DP(NETIF_MSG_HW, "new state %x\n", bp->attn_state);
+
+	if (asserted & ATTN_HARD_WIRED_MASK) {
+		if (asserted & ATTN_NIG_FOR_FUNC) {
+
+			bnx2x_acquire_phy_lock(bp);
+
+			/* save nig interrupt mask */
+			nig_mask = REG_RD(bp, nig_int_mask_addr);
+
+			/* If nig_mask is not set, no need to call the update
+			 * function.
+			 */
+			if (nig_mask) {
+				REG_WR(bp, nig_int_mask_addr, 0);
+
+				bnx2x_link_attn(bp);
+			}
+
+			/* handle unicore attn? */
+		}
+		if (asserted & ATTN_SW_TIMER_4_FUNC)
+			DP(NETIF_MSG_HW, "ATTN_SW_TIMER_4_FUNC!\n");
+
+		if (asserted & GPIO_2_FUNC)
+			DP(NETIF_MSG_HW, "GPIO_2_FUNC!\n");
+
+		if (asserted & GPIO_3_FUNC)
+			DP(NETIF_MSG_HW, "GPIO_3_FUNC!\n");
+
+		if (asserted & GPIO_4_FUNC)
+			DP(NETIF_MSG_HW, "GPIO_4_FUNC!\n");
+
+		if (port == 0) {
+			if (asserted & ATTN_GENERAL_ATTN_1) {
+				DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_1!\n");
+				REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_1, 0x0);
+			}
+			if (asserted & ATTN_GENERAL_ATTN_2) {
+				DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_2!\n");
+				REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_2, 0x0);
+			}
+			if (asserted & ATTN_GENERAL_ATTN_3) {
+				DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_3!\n");
+				REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_3, 0x0);
+			}
+		} else {
+			if (asserted & ATTN_GENERAL_ATTN_4) {
+				DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_4!\n");
+				REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_4, 0x0);
+			}
+			if (asserted & ATTN_GENERAL_ATTN_5) {
+				DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_5!\n");
+				REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_5, 0x0);
+			}
+			if (asserted & ATTN_GENERAL_ATTN_6) {
+				DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_6!\n");
+				REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_6, 0x0);
+			}
+		}
+
+	} /* if hardwired */
+
+	if (bp->common.int_block == INT_BLOCK_HC)
+		reg_addr = (HC_REG_COMMAND_REG + port*32 +
+			    COMMAND_REG_ATTN_BITS_SET);
+	else
+		reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_SET_UPPER*8);
+
+	DP(NETIF_MSG_HW, "about to mask 0x%08x at %s addr 0x%x\n", asserted,
+	   (bp->common.int_block == INT_BLOCK_HC) ? "HC" : "IGU", reg_addr);
+	REG_WR(bp, reg_addr, asserted);
+
+	/* now set back the mask */
+	if (asserted & ATTN_NIG_FOR_FUNC) {
+		REG_WR(bp, nig_int_mask_addr, nig_mask);
+		bnx2x_release_phy_lock(bp);
+	}
+}
+
+static inline void bnx2x_fan_failure(struct bnx2x *bp)
+{
+	int port = BP_PORT(bp);
+	u32 ext_phy_config;
+	/* mark the failure */
+	ext_phy_config =
+		SHMEM_RD(bp,
+			 dev_info.port_hw_config[port].external_phy_config);
+
+	ext_phy_config &= ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
+	ext_phy_config |= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE;
+	SHMEM_WR(bp, dev_info.port_hw_config[port].external_phy_config,
+		 ext_phy_config);
+
+	/* log the failure */
+	netdev_err(bp->dev, "Fan Failure on Network Controller has caused"
+	       " the driver to shutdown the card to prevent permanent"
+	       " damage.  Please contact OEM Support for assistance\n");
+}
+
+static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn)
+{
+	int port = BP_PORT(bp);
+	int reg_offset;
+	u32 val;
+
+	reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
+			     MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
+
+	if (attn & AEU_INPUTS_ATTN_BITS_SPIO5) {
+
+		val = REG_RD(bp, reg_offset);
+		val &= ~AEU_INPUTS_ATTN_BITS_SPIO5;
+		REG_WR(bp, reg_offset, val);
+
+		BNX2X_ERR("SPIO5 hw attention\n");
+
+		/* Fan failure attention */
+		bnx2x_hw_reset_phy(&bp->link_params);
+		bnx2x_fan_failure(bp);
+	}
+
+	if ((attn & bp->link_vars.aeu_int_mask) && bp->port.pmf) {
+		bnx2x_acquire_phy_lock(bp);
+		bnx2x_handle_module_detect_int(&bp->link_params);
+		bnx2x_release_phy_lock(bp);
+	}
+
+	if (attn & HW_INTERRUT_ASSERT_SET_0) {
+
+		val = REG_RD(bp, reg_offset);
+		val &= ~(attn & HW_INTERRUT_ASSERT_SET_0);
+		REG_WR(bp, reg_offset, val);
+
+		BNX2X_ERR("FATAL HW block attention set0 0x%x\n",
+			  (u32)(attn & HW_INTERRUT_ASSERT_SET_0));
+		bnx2x_panic();
+	}
+}
+
+static inline void bnx2x_attn_int_deasserted1(struct bnx2x *bp, u32 attn)
+{
+	u32 val;
+
+	if (attn & AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT) {
+
+		val = REG_RD(bp, DORQ_REG_DORQ_INT_STS_CLR);
+		BNX2X_ERR("DB hw attention 0x%x\n", val);
+		/* DORQ discard attention */
+		if (val & 0x2)
+			BNX2X_ERR("FATAL error from DORQ\n");
+	}
+
+	if (attn & HW_INTERRUT_ASSERT_SET_1) {
+
+		int port = BP_PORT(bp);
+		int reg_offset;
+
+		reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 :
+				     MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1);
+
+		val = REG_RD(bp, reg_offset);
+		val &= ~(attn & HW_INTERRUT_ASSERT_SET_1);
+		REG_WR(bp, reg_offset, val);
+
+		BNX2X_ERR("FATAL HW block attention set1 0x%x\n",
+			  (u32)(attn & HW_INTERRUT_ASSERT_SET_1));
+		bnx2x_panic();
+	}
+}
+
+static inline void bnx2x_attn_int_deasserted2(struct bnx2x *bp, u32 attn)
+{
+	u32 val;
+
+	if (attn & AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT) {
+
+		val = REG_RD(bp, CFC_REG_CFC_INT_STS_CLR);
+		BNX2X_ERR("CFC hw attention 0x%x\n", val);
+		/* CFC error attention */
+		if (val & 0x2)
+			BNX2X_ERR("FATAL error from CFC\n");
+	}
+
+	if (attn & AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT) {
+		val = REG_RD(bp, PXP_REG_PXP_INT_STS_CLR_0);
+		BNX2X_ERR("PXP hw attention-0 0x%x\n", val);
+		/* RQ_USDMDP_FIFO_OVERFLOW */
+		if (val & 0x18000)
+			BNX2X_ERR("FATAL error from PXP\n");
+
+		if (!CHIP_IS_E1x(bp)) {
+			val = REG_RD(bp, PXP_REG_PXP_INT_STS_CLR_1);
+			BNX2X_ERR("PXP hw attention-1 0x%x\n", val);
+		}
+	}
+
+	if (attn & HW_INTERRUT_ASSERT_SET_2) {
+
+		int port = BP_PORT(bp);
+		int reg_offset;
+
+		reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 :
+				     MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2);
+
+		val = REG_RD(bp, reg_offset);
+		val &= ~(attn & HW_INTERRUT_ASSERT_SET_2);
+		REG_WR(bp, reg_offset, val);
+
+		BNX2X_ERR("FATAL HW block attention set2 0x%x\n",
+			  (u32)(attn & HW_INTERRUT_ASSERT_SET_2));
+		bnx2x_panic();
+	}
+}
+
+static inline void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn)
+{
+	u32 val;
+
+	if (attn & EVEREST_GEN_ATTN_IN_USE_MASK) {
+
+		if (attn & BNX2X_PMF_LINK_ASSERT) {
+			int func = BP_FUNC(bp);
+
+			REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0);
+			bp->mf_config[BP_VN(bp)] = MF_CFG_RD(bp,
+					func_mf_config[BP_ABS_FUNC(bp)].config);
+			val = SHMEM_RD(bp,
+				       func_mb[BP_FW_MB_IDX(bp)].drv_status);
+			if (val & DRV_STATUS_DCC_EVENT_MASK)
+				bnx2x_dcc_event(bp,
+					    (val & DRV_STATUS_DCC_EVENT_MASK));
+
+			if (val & DRV_STATUS_SET_MF_BW)
+				bnx2x_set_mf_bw(bp);
+
+			if ((bp->port.pmf == 0) && (val & DRV_STATUS_PMF))
+				bnx2x_pmf_update(bp);
+
+			if (bp->port.pmf &&
+			    (val & DRV_STATUS_DCBX_NEGOTIATION_RESULTS) &&
+				bp->dcbx_enabled > 0)
+				/* start dcbx state machine */
+				bnx2x_dcbx_set_params(bp,
+					BNX2X_DCBX_STATE_NEG_RECEIVED);
+			if (bp->link_vars.periodic_flags &
+			    PERIODIC_FLAGS_LINK_EVENT) {
+				/*  sync with link */
+				bnx2x_acquire_phy_lock(bp);
+				bp->link_vars.periodic_flags &=
+					~PERIODIC_FLAGS_LINK_EVENT;
+				bnx2x_release_phy_lock(bp);
+				if (IS_MF(bp))
+					bnx2x_link_sync_notify(bp);
+				bnx2x_link_report(bp);
+			}
+			/* Always call it here: bnx2x_link_report() will
+			 * prevent the link indication duplication.
+			 */
+			bnx2x__link_status_update(bp);
+		} else if (attn & BNX2X_MC_ASSERT_BITS) {
+
+			BNX2X_ERR("MC assert!\n");
+			bnx2x_mc_assert(bp);
+			REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_10, 0);
+			REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_9, 0);
+			REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_8, 0);
+			REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_7, 0);
+			bnx2x_panic();
+
+		} else if (attn & BNX2X_MCP_ASSERT) {
+
+			BNX2X_ERR("MCP assert!\n");
+			REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_11, 0);
+			bnx2x_fw_dump(bp);
+
+		} else
+			BNX2X_ERR("Unknown HW assert! (attn 0x%x)\n", attn);
+	}
+
+	if (attn & EVEREST_LATCHED_ATTN_IN_USE_MASK) {
+		BNX2X_ERR("LATCHED attention 0x%08x (masked)\n", attn);
+		if (attn & BNX2X_GRC_TIMEOUT) {
+			val = CHIP_IS_E1(bp) ? 0 :
+					REG_RD(bp, MISC_REG_GRC_TIMEOUT_ATTN);
+			BNX2X_ERR("GRC time-out 0x%08x\n", val);
+		}
+		if (attn & BNX2X_GRC_RSV) {
+			val = CHIP_IS_E1(bp) ? 0 :
+					REG_RD(bp, MISC_REG_GRC_RSV_ATTN);
+			BNX2X_ERR("GRC reserved 0x%08x\n", val);
+		}
+		REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x7ff);
+	}
+}
+
+/*
+ * Bits map:
+ * 0-7   - Engine0 load counter.
+ * 8-15  - Engine1 load counter.
+ * 16    - Engine0 RESET_IN_PROGRESS bit.
+ * 17    - Engine1 RESET_IN_PROGRESS bit.
+ * 18    - Engine0 ONE_IS_LOADED. Set when there is at least one active function
+ *         on the engine
+ * 19    - Engine1 ONE_IS_LOADED.
+ * 20    - Chip reset flow bit. When set none-leader must wait for both engines
+ *         leader to complete (check for both RESET_IN_PROGRESS bits and not for
+ *         just the one belonging to its engine).
+ *
+ */
+#define BNX2X_RECOVERY_GLOB_REG		MISC_REG_GENERIC_POR_1
+
+#define BNX2X_PATH0_LOAD_CNT_MASK	0x000000ff
+#define BNX2X_PATH0_LOAD_CNT_SHIFT	0
+#define BNX2X_PATH1_LOAD_CNT_MASK	0x0000ff00
+#define BNX2X_PATH1_LOAD_CNT_SHIFT	8
+#define BNX2X_PATH0_RST_IN_PROG_BIT	0x00010000
+#define BNX2X_PATH1_RST_IN_PROG_BIT	0x00020000
+#define BNX2X_GLOBAL_RESET_BIT		0x00040000
+
+/*
+ * Set the GLOBAL_RESET bit.
+ *
+ * Should be run under rtnl lock
+ */
+void bnx2x_set_reset_global(struct bnx2x *bp)
+{
+	u32 val	= REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
+
+	REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val | BNX2X_GLOBAL_RESET_BIT);
+	barrier();
+	mmiowb();
+}
+
+/*
+ * Clear the GLOBAL_RESET bit.
+ *
+ * Should be run under rtnl lock
+ */
+static inline void bnx2x_clear_reset_global(struct bnx2x *bp)
+{
+	u32 val	= REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
+
+	REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val & (~BNX2X_GLOBAL_RESET_BIT));
+	barrier();
+	mmiowb();
+}
+
+/*
+ * Checks the GLOBAL_RESET bit.
+ *
+ * should be run under rtnl lock
+ */
+static inline bool bnx2x_reset_is_global(struct bnx2x *bp)
+{
+	u32 val	= REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
+
+	DP(NETIF_MSG_HW, "GEN_REG_VAL=0x%08x\n", val);
+	return (val & BNX2X_GLOBAL_RESET_BIT) ? true : false;
+}
+
+/*
+ * Clear RESET_IN_PROGRESS bit for the current engine.
+ *
+ * Should be run under rtnl lock
+ */
+static inline void bnx2x_set_reset_done(struct bnx2x *bp)
+{
+	u32 val	= REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
+	u32 bit = BP_PATH(bp) ?
+		BNX2X_PATH1_RST_IN_PROG_BIT : BNX2X_PATH0_RST_IN_PROG_BIT;
+
+	/* Clear the bit */
+	val &= ~bit;
+	REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val);
+	barrier();
+	mmiowb();
+}
+
+/*
+ * Set RESET_IN_PROGRESS for the current engine.
+ *
+ * should be run under rtnl lock
+ */
+void bnx2x_set_reset_in_progress(struct bnx2x *bp)
+{
+	u32 val	= REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
+	u32 bit = BP_PATH(bp) ?
+		BNX2X_PATH1_RST_IN_PROG_BIT : BNX2X_PATH0_RST_IN_PROG_BIT;
+
+	/* Set the bit */
+	val |= bit;
+	REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val);
+	barrier();
+	mmiowb();
+}
+
+/*
+ * Checks the RESET_IN_PROGRESS bit for the given engine.
+ * should be run under rtnl lock
+ */
+bool bnx2x_reset_is_done(struct bnx2x *bp, int engine)
+{
+	u32 val	= REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
+	u32 bit = engine ?
+		BNX2X_PATH1_RST_IN_PROG_BIT : BNX2X_PATH0_RST_IN_PROG_BIT;
+
+	/* return false if bit is set */
+	return (val & bit) ? false : true;
+}
+
+/*
+ * Increment the load counter for the current engine.
+ *
+ * should be run under rtnl lock
+ */
+void bnx2x_inc_load_cnt(struct bnx2x *bp)
+{
+	u32 val1, val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
+	u32 mask = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_MASK :
+			     BNX2X_PATH0_LOAD_CNT_MASK;
+	u32 shift = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_SHIFT :
+			     BNX2X_PATH0_LOAD_CNT_SHIFT;
+
+	DP(NETIF_MSG_HW, "Old GEN_REG_VAL=0x%08x\n", val);
+
+	/* get the current counter value */
+	val1 = (val & mask) >> shift;
+
+	/* increment... */
+	val1++;
+
+	/* clear the old value */
+	val &= ~mask;
+
+	/* set the new one */
+	val |= ((val1 << shift) & mask);
+
+	REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val);
+	barrier();
+	mmiowb();
+}
+
+/**
+ * bnx2x_dec_load_cnt - decrement the load counter
+ *
+ * @bp:		driver handle
+ *
+ * Should be run under rtnl lock.
+ * Decrements the load counter for the current engine. Returns
+ * the new counter value.
+ */
+u32 bnx2x_dec_load_cnt(struct bnx2x *bp)
+{
+	u32 val1, val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
+	u32 mask = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_MASK :
+			     BNX2X_PATH0_LOAD_CNT_MASK;
+	u32 shift = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_SHIFT :
+			     BNX2X_PATH0_LOAD_CNT_SHIFT;
+
+	DP(NETIF_MSG_HW, "Old GEN_REG_VAL=0x%08x\n", val);
+
+	/* get the current counter value */
+	val1 = (val & mask) >> shift;
+
+	/* decrement... */
+	val1--;
+
+	/* clear the old value */
+	val &= ~mask;
+
+	/* set the new one */
+	val |= ((val1 << shift) & mask);
+
+	REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val);
+	barrier();
+	mmiowb();
+
+	return val1;
+}
+
+/*
+ * Read the load counter for the current engine.
+ *
+ * should be run under rtnl lock
+ */
+static inline u32 bnx2x_get_load_cnt(struct bnx2x *bp, int engine)
+{
+	u32 mask = (engine ? BNX2X_PATH1_LOAD_CNT_MASK :
+			     BNX2X_PATH0_LOAD_CNT_MASK);
+	u32 shift = (engine ? BNX2X_PATH1_LOAD_CNT_SHIFT :
+			     BNX2X_PATH0_LOAD_CNT_SHIFT);
+	u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
+
+	DP(NETIF_MSG_HW, "GLOB_REG=0x%08x\n", val);
+
+	val = (val & mask) >> shift;
+
+	DP(NETIF_MSG_HW, "load_cnt for engine %d = %d\n", engine, val);
+
+	return val;
+}
+
+/*
+ * Reset the load counter for the current engine.
+ *
+ * should be run under rtnl lock
+ */
+static inline void bnx2x_clear_load_cnt(struct bnx2x *bp)
+{
+	u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
+	u32 mask = (BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_MASK :
+			     BNX2X_PATH0_LOAD_CNT_MASK);
+
+	REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val & (~mask));
+}
+
+static inline void _print_next_block(int idx, const char *blk)
+{
+	if (idx)
+		pr_cont(", ");
+	pr_cont("%s", blk);
+}
+
+static inline int bnx2x_check_blocks_with_parity0(u32 sig, int par_num,
+						  bool print)
+{
+	int i = 0;
+	u32 cur_bit = 0;
+	for (i = 0; sig; i++) {
+		cur_bit = ((u32)0x1 << i);
+		if (sig & cur_bit) {
+			switch (cur_bit) {
+			case AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++, "BRB");
+				break;
+			case AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++, "PARSER");
+				break;
+			case AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++, "TSDM");
+				break;
+			case AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++,
+							  "SEARCHER");
+				break;
+			case AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++, "TCM");
+				break;
+			case AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++, "TSEMI");
+				break;
+			case AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++, "XPB");
+				break;
+			}
+
+			/* Clear the bit */
+			sig &= ~cur_bit;
+		}
+	}
+
+	return par_num;
+}
+
+static inline int bnx2x_check_blocks_with_parity1(u32 sig, int par_num,
+						  bool *global, bool print)
+{
+	int i = 0;
+	u32 cur_bit = 0;
+	for (i = 0; sig; i++) {
+		cur_bit = ((u32)0x1 << i);
+		if (sig & cur_bit) {
+			switch (cur_bit) {
+			case AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++, "PBF");
+				break;
+			case AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++, "QM");
+				break;
+			case AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++, "TM");
+				break;
+			case AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++, "XSDM");
+				break;
+			case AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++, "XCM");
+				break;
+			case AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++, "XSEMI");
+				break;
+			case AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++,
+							  "DOORBELLQ");
+				break;
+			case AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++, "NIG");
+				break;
+			case AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++,
+							  "VAUX PCI CORE");
+				*global = true;
+				break;
+			case AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++, "DEBUG");
+				break;
+			case AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++, "USDM");
+				break;
+			case AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++, "UCM");
+				break;
+			case AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++, "USEMI");
+				break;
+			case AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++, "UPB");
+				break;
+			case AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++, "CSDM");
+				break;
+			case AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++, "CCM");
+				break;
+			}
+
+			/* Clear the bit */
+			sig &= ~cur_bit;
+		}
+	}
+
+	return par_num;
+}
+
+static inline int bnx2x_check_blocks_with_parity2(u32 sig, int par_num,
+						  bool print)
+{
+	int i = 0;
+	u32 cur_bit = 0;
+	for (i = 0; sig; i++) {
+		cur_bit = ((u32)0x1 << i);
+		if (sig & cur_bit) {
+			switch (cur_bit) {
+			case AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++, "CSEMI");
+				break;
+			case AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++, "PXP");
+				break;
+			case AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++,
+					"PXPPCICLOCKCLIENT");
+				break;
+			case AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++, "CFC");
+				break;
+			case AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++, "CDU");
+				break;
+			case AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++, "DMAE");
+				break;
+			case AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++, "IGU");
+				break;
+			case AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++, "MISC");
+				break;
+			}
+
+			/* Clear the bit */
+			sig &= ~cur_bit;
+		}
+	}
+
+	return par_num;
+}
+
+static inline int bnx2x_check_blocks_with_parity3(u32 sig, int par_num,
+						  bool *global, bool print)
+{
+	int i = 0;
+	u32 cur_bit = 0;
+	for (i = 0; sig; i++) {
+		cur_bit = ((u32)0x1 << i);
+		if (sig & cur_bit) {
+			switch (cur_bit) {
+			case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY:
+				if (print)
+					_print_next_block(par_num++, "MCP ROM");
+				*global = true;
+				break;
+			case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY:
+				if (print)
+					_print_next_block(par_num++,
+							  "MCP UMP RX");
+				*global = true;
+				break;
+			case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY:
+				if (print)
+					_print_next_block(par_num++,
+							  "MCP UMP TX");
+				*global = true;
+				break;
+			case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY:
+				if (print)
+					_print_next_block(par_num++,
+							  "MCP SCPAD");
+				*global = true;
+				break;
+			}
+
+			/* Clear the bit */
+			sig &= ~cur_bit;
+		}
+	}
+
+	return par_num;
+}
+
+static inline int bnx2x_check_blocks_with_parity4(u32 sig, int par_num,
+						  bool print)
+{
+	int i = 0;
+	u32 cur_bit = 0;
+	for (i = 0; sig; i++) {
+		cur_bit = ((u32)0x1 << i);
+		if (sig & cur_bit) {
+			switch (cur_bit) {
+			case AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++, "PGLUE_B");
+				break;
+			case AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR:
+				if (print)
+					_print_next_block(par_num++, "ATC");
+				break;
+			}
+
+			/* Clear the bit */
+			sig &= ~cur_bit;
+		}
+	}
+
+	return par_num;
+}
+
+static inline bool bnx2x_parity_attn(struct bnx2x *bp, bool *global, bool print,
+				     u32 *sig)
+{
+	if ((sig[0] & HW_PRTY_ASSERT_SET_0) ||
+	    (sig[1] & HW_PRTY_ASSERT_SET_1) ||
+	    (sig[2] & HW_PRTY_ASSERT_SET_2) ||
+	    (sig[3] & HW_PRTY_ASSERT_SET_3) ||
+	    (sig[4] & HW_PRTY_ASSERT_SET_4)) {
+		int par_num = 0;
+		DP(NETIF_MSG_HW, "Was parity error: HW block parity attention: "
+			"[0]:0x%08x [1]:0x%08x [2]:0x%08x [3]:0x%08x "
+			"[4]:0x%08x\n",
+			  sig[0] & HW_PRTY_ASSERT_SET_0,
+			  sig[1] & HW_PRTY_ASSERT_SET_1,
+			  sig[2] & HW_PRTY_ASSERT_SET_2,
+			  sig[3] & HW_PRTY_ASSERT_SET_3,
+			  sig[4] & HW_PRTY_ASSERT_SET_4);
+		if (print)
+			netdev_err(bp->dev,
+				   "Parity errors detected in blocks: ");
+		par_num = bnx2x_check_blocks_with_parity0(
+			sig[0] & HW_PRTY_ASSERT_SET_0, par_num, print);
+		par_num = bnx2x_check_blocks_with_parity1(
+			sig[1] & HW_PRTY_ASSERT_SET_1, par_num, global, print);
+		par_num = bnx2x_check_blocks_with_parity2(
+			sig[2] & HW_PRTY_ASSERT_SET_2, par_num, print);
+		par_num = bnx2x_check_blocks_with_parity3(
+			sig[3] & HW_PRTY_ASSERT_SET_3, par_num, global, print);
+		par_num = bnx2x_check_blocks_with_parity4(
+			sig[4] & HW_PRTY_ASSERT_SET_4, par_num, print);
+
+		if (print)
+			pr_cont("\n");
+
+		return true;
+	} else
+		return false;
+}
+
+/**
+ * bnx2x_chk_parity_attn - checks for parity attentions.
+ *
+ * @bp:		driver handle
+ * @global:	true if there was a global attention
+ * @print:	show parity attention in syslog
+ */
+bool bnx2x_chk_parity_attn(struct bnx2x *bp, bool *global, bool print)
+{
+	struct attn_route attn = { {0} };
+	int port = BP_PORT(bp);
+
+	attn.sig[0] = REG_RD(bp,
+		MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 +
+			     port*4);
+	attn.sig[1] = REG_RD(bp,
+		MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 +
+			     port*4);
+	attn.sig[2] = REG_RD(bp,
+		MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 +
+			     port*4);
+	attn.sig[3] = REG_RD(bp,
+		MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 +
+			     port*4);
+
+	if (!CHIP_IS_E1x(bp))
+		attn.sig[4] = REG_RD(bp,
+			MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 +
+				     port*4);
+
+	return bnx2x_parity_attn(bp, global, print, attn.sig);
+}
+
+
+static inline void bnx2x_attn_int_deasserted4(struct bnx2x *bp, u32 attn)
+{
+	u32 val;
+	if (attn & AEU_INPUTS_ATTN_BITS_PGLUE_HW_INTERRUPT) {
+
+		val = REG_RD(bp, PGLUE_B_REG_PGLUE_B_INT_STS_CLR);
+		BNX2X_ERR("PGLUE hw attention 0x%x\n", val);
+		if (val & PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR)
+			BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_"
+				  "ADDRESS_ERROR\n");
+		if (val & PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR)
+			BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_"
+				  "INCORRECT_RCV_BEHAVIOR\n");
+		if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN)
+			BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_"
+				  "WAS_ERROR_ATTN\n");
+		if (val & PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN)
+			BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_"
+				  "VF_LENGTH_VIOLATION_ATTN\n");
+		if (val &
+		    PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN)
+			BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_"
+				  "VF_GRC_SPACE_VIOLATION_ATTN\n");
+		if (val &
+		    PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN)
+			BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_"
+				  "VF_MSIX_BAR_VIOLATION_ATTN\n");
+		if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN)
+			BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_"
+				  "TCPL_ERROR_ATTN\n");
+		if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN)
+			BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_"
+				  "TCPL_IN_TWO_RCBS_ATTN\n");
+		if (val & PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW)
+			BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_"
+				  "CSSNOOP_FIFO_OVERFLOW\n");
+	}
+	if (attn & AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT) {
+		val = REG_RD(bp, ATC_REG_ATC_INT_STS_CLR);
+		BNX2X_ERR("ATC hw attention 0x%x\n", val);
+		if (val & ATC_ATC_INT_STS_REG_ADDRESS_ERROR)
+			BNX2X_ERR("ATC_ATC_INT_STS_REG_ADDRESS_ERROR\n");
+		if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND)
+			BNX2X_ERR("ATC_ATC_INT_STS_REG"
+				  "_ATC_TCPL_TO_NOT_PEND\n");
+		if (val & ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS)
+			BNX2X_ERR("ATC_ATC_INT_STS_REG_"
+				  "ATC_GPA_MULTIPLE_HITS\n");
+		if (val & ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT)
+			BNX2X_ERR("ATC_ATC_INT_STS_REG_"
+				  "ATC_RCPL_TO_EMPTY_CNT\n");
+		if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR)
+			BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR\n");
+		if (val & ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU)
+			BNX2X_ERR("ATC_ATC_INT_STS_REG_"
+				  "ATC_IREQ_LESS_THAN_STU\n");
+	}
+
+	if (attn & (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR |
+		    AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)) {
+		BNX2X_ERR("FATAL parity attention set4 0x%x\n",
+		(u32)(attn & (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR |
+		    AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)));
+	}
+
+}
+
+static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted)
+{
+	struct attn_route attn, *group_mask;
+	int port = BP_PORT(bp);
+	int index;
+	u32 reg_addr;
+	u32 val;
+	u32 aeu_mask;
+	bool global = false;
+
+	/* need to take HW lock because MCP or other port might also
+	   try to handle this event */
+	bnx2x_acquire_alr(bp);
+
+	if (bnx2x_chk_parity_attn(bp, &global, true)) {
+#ifndef BNX2X_STOP_ON_ERROR
+		bp->recovery_state = BNX2X_RECOVERY_INIT;
+		schedule_delayed_work(&bp->sp_rtnl_task, 0);
+		/* Disable HW interrupts */
+		bnx2x_int_disable(bp);
+		/* In case of parity errors don't handle attentions so that
+		 * other function would "see" parity errors.
+		 */
+#else
+		bnx2x_panic();
+#endif
+		bnx2x_release_alr(bp);
+		return;
+	}
+
+	attn.sig[0] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + port*4);
+	attn.sig[1] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + port*4);
+	attn.sig[2] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 + port*4);
+	attn.sig[3] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + port*4);
+	if (!CHIP_IS_E1x(bp))
+		attn.sig[4] =
+		      REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 + port*4);
+	else
+		attn.sig[4] = 0;
+
+	DP(NETIF_MSG_HW, "attn: %08x %08x %08x %08x %08x\n",
+	   attn.sig[0], attn.sig[1], attn.sig[2], attn.sig[3], attn.sig[4]);
+
+	for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) {
+		if (deasserted & (1 << index)) {
+			group_mask = &bp->attn_group[index];
+
+			DP(NETIF_MSG_HW, "group[%d]: %08x %08x "
+					 "%08x %08x %08x\n",
+			   index,
+			   group_mask->sig[0], group_mask->sig[1],
+			   group_mask->sig[2], group_mask->sig[3],
+			   group_mask->sig[4]);
+
+			bnx2x_attn_int_deasserted4(bp,
+					attn.sig[4] & group_mask->sig[4]);
+			bnx2x_attn_int_deasserted3(bp,
+					attn.sig[3] & group_mask->sig[3]);
+			bnx2x_attn_int_deasserted1(bp,
+					attn.sig[1] & group_mask->sig[1]);
+			bnx2x_attn_int_deasserted2(bp,
+					attn.sig[2] & group_mask->sig[2]);
+			bnx2x_attn_int_deasserted0(bp,
+					attn.sig[0] & group_mask->sig[0]);
+		}
+	}
+
+	bnx2x_release_alr(bp);
+
+	if (bp->common.int_block == INT_BLOCK_HC)
+		reg_addr = (HC_REG_COMMAND_REG + port*32 +
+			    COMMAND_REG_ATTN_BITS_CLR);
+	else
+		reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_CLR_UPPER*8);
+
+	val = ~deasserted;
+	DP(NETIF_MSG_HW, "about to mask 0x%08x at %s addr 0x%x\n", val,
+	   (bp->common.int_block == INT_BLOCK_HC) ? "HC" : "IGU", reg_addr);
+	REG_WR(bp, reg_addr, val);
+
+	if (~bp->attn_state & deasserted)
+		BNX2X_ERR("IGU ERROR\n");
+
+	reg_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
+			  MISC_REG_AEU_MASK_ATTN_FUNC_0;
+
+	bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
+	aeu_mask = REG_RD(bp, reg_addr);
+
+	DP(NETIF_MSG_HW, "aeu_mask %x  newly deasserted %x\n",
+	   aeu_mask, deasserted);
+	aeu_mask |= (deasserted & 0x3ff);
+	DP(NETIF_MSG_HW, "new mask %x\n", aeu_mask);
+
+	REG_WR(bp, reg_addr, aeu_mask);
+	bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
+
+	DP(NETIF_MSG_HW, "attn_state %x\n", bp->attn_state);
+	bp->attn_state &= ~deasserted;
+	DP(NETIF_MSG_HW, "new state %x\n", bp->attn_state);
+}
+
+static void bnx2x_attn_int(struct bnx2x *bp)
+{
+	/* read local copy of bits */
+	u32 attn_bits = le32_to_cpu(bp->def_status_blk->atten_status_block.
+								attn_bits);
+	u32 attn_ack = le32_to_cpu(bp->def_status_blk->atten_status_block.
+								attn_bits_ack);
+	u32 attn_state = bp->attn_state;
+
+	/* look for changed bits */
+	u32 asserted   =  attn_bits & ~attn_ack & ~attn_state;
+	u32 deasserted = ~attn_bits &  attn_ack &  attn_state;
+
+	DP(NETIF_MSG_HW,
+	   "attn_bits %x  attn_ack %x  asserted %x  deasserted %x\n",
+	   attn_bits, attn_ack, asserted, deasserted);
+
+	if (~(attn_bits ^ attn_ack) & (attn_bits ^ attn_state))
+		BNX2X_ERR("BAD attention state\n");
+
+	/* handle bits that were raised */
+	if (asserted)
+		bnx2x_attn_int_asserted(bp, asserted);
+
+	if (deasserted)
+		bnx2x_attn_int_deasserted(bp, deasserted);
+}
+
+void bnx2x_igu_ack_sb(struct bnx2x *bp, u8 igu_sb_id, u8 segment,
+		      u16 index, u8 op, u8 update)
+{
+	u32 igu_addr = BAR_IGU_INTMEM + (IGU_CMD_INT_ACK_BASE + igu_sb_id)*8;
+
+	bnx2x_igu_ack_sb_gen(bp, igu_sb_id, segment, index, op, update,
+			     igu_addr);
+}
+
+static inline void bnx2x_update_eq_prod(struct bnx2x *bp, u16 prod)
+{
+	/* No memory barriers */
+	storm_memset_eq_prod(bp, prod, BP_FUNC(bp));
+	mmiowb(); /* keep prod updates ordered */
+}
+
+#ifdef BCM_CNIC
+static int  bnx2x_cnic_handle_cfc_del(struct bnx2x *bp, u32 cid,
+				      union event_ring_elem *elem)
+{
+	u8 err = elem->message.error;
+
+	if (!bp->cnic_eth_dev.starting_cid  ||
+	    (cid < bp->cnic_eth_dev.starting_cid &&
+	    cid != bp->cnic_eth_dev.iscsi_l2_cid))
+		return 1;
+
+	DP(BNX2X_MSG_SP, "got delete ramrod for CNIC CID %d\n", cid);
+
+	if (unlikely(err)) {
+
+		BNX2X_ERR("got delete ramrod for CNIC CID %d with error!\n",
+			  cid);
+		bnx2x_panic_dump(bp);
+	}
+	bnx2x_cnic_cfc_comp(bp, cid, err);
+	return 0;
+}
+#endif
+
+static inline void bnx2x_handle_mcast_eqe(struct bnx2x *bp)
+{
+	struct bnx2x_mcast_ramrod_params rparam;
+	int rc;
+
+	memset(&rparam, 0, sizeof(rparam));
+
+	rparam.mcast_obj = &bp->mcast_obj;
+
+	netif_addr_lock_bh(bp->dev);
+
+	/* Clear pending state for the last command */
+	bp->mcast_obj.raw.clear_pending(&bp->mcast_obj.raw);
+
+	/* If there are pending mcast commands - send them */
+	if (bp->mcast_obj.check_pending(&bp->mcast_obj)) {
+		rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_CONT);
+		if (rc < 0)
+			BNX2X_ERR("Failed to send pending mcast commands: %d\n",
+				  rc);
+	}
+
+	netif_addr_unlock_bh(bp->dev);
+}
+
+static inline void bnx2x_handle_classification_eqe(struct bnx2x *bp,
+						   union event_ring_elem *elem)
+{
+	unsigned long ramrod_flags = 0;
+	int rc = 0;
+	u32 cid = elem->message.data.eth_event.echo & BNX2X_SWCID_MASK;
+	struct bnx2x_vlan_mac_obj *vlan_mac_obj;
+
+	/* Always push next commands out, don't wait here */
+	__set_bit(RAMROD_CONT, &ramrod_flags);
+
+	switch (elem->message.data.eth_event.echo >> BNX2X_SWCID_SHIFT) {
+	case BNX2X_FILTER_MAC_PENDING:
+#ifdef BCM_CNIC
+		if (cid == BNX2X_ISCSI_ETH_CID)
+			vlan_mac_obj = &bp->iscsi_l2_mac_obj;
+		else
+#endif
+			vlan_mac_obj = &bp->fp[cid].mac_obj;
+
+		break;
+		vlan_mac_obj = &bp->fp[cid].mac_obj;
+
+	case BNX2X_FILTER_MCAST_PENDING:
+		/* This is only relevant for 57710 where multicast MACs are
+		 * configured as unicast MACs using the same ramrod.
+		 */
+		bnx2x_handle_mcast_eqe(bp);
+		return;
+	default:
+		BNX2X_ERR("Unsupported classification command: %d\n",
+			  elem->message.data.eth_event.echo);
+		return;
+	}
+
+	rc = vlan_mac_obj->complete(bp, vlan_mac_obj, elem, &ramrod_flags);
+
+	if (rc < 0)
+		BNX2X_ERR("Failed to schedule new commands: %d\n", rc);
+	else if (rc > 0)
+		DP(BNX2X_MSG_SP, "Scheduled next pending commands...\n");
+
+}
+
+#ifdef BCM_CNIC
+static void bnx2x_set_iscsi_eth_rx_mode(struct bnx2x *bp, bool start);
+#endif
+
+static inline void bnx2x_handle_rx_mode_eqe(struct bnx2x *bp)
+{
+	netif_addr_lock_bh(bp->dev);
+
+	clear_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state);
+
+	/* Send rx_mode command again if was requested */
+	if (test_and_clear_bit(BNX2X_FILTER_RX_MODE_SCHED, &bp->sp_state))
+		bnx2x_set_storm_rx_mode(bp);
+#ifdef BCM_CNIC
+	else if (test_and_clear_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED,
+				    &bp->sp_state))
+		bnx2x_set_iscsi_eth_rx_mode(bp, true);
+	else if (test_and_clear_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED,
+				    &bp->sp_state))
+		bnx2x_set_iscsi_eth_rx_mode(bp, false);
+#endif
+
+	netif_addr_unlock_bh(bp->dev);
+}
+
+static inline struct bnx2x_queue_sp_obj *bnx2x_cid_to_q_obj(
+	struct bnx2x *bp, u32 cid)
+{
+	DP(BNX2X_MSG_SP, "retrieving fp from cid %d", cid);
+#ifdef BCM_CNIC
+	if (cid == BNX2X_FCOE_ETH_CID)
+		return &bnx2x_fcoe(bp, q_obj);
+	else
+#endif
+		return &bnx2x_fp(bp, CID_TO_FP(cid), q_obj);
+}
+
+static void bnx2x_eq_int(struct bnx2x *bp)
+{
+	u16 hw_cons, sw_cons, sw_prod;
+	union event_ring_elem *elem;
+	u32 cid;
+	u8 opcode;
+	int spqe_cnt = 0;
+	struct bnx2x_queue_sp_obj *q_obj;
+	struct bnx2x_func_sp_obj *f_obj = &bp->func_obj;
+	struct bnx2x_raw_obj *rss_raw = &bp->rss_conf_obj.raw;
+
+	hw_cons = le16_to_cpu(*bp->eq_cons_sb);
+
+	/* The hw_cos range is 1-255, 257 - the sw_cons range is 0-254, 256.
+	 * when we get the the next-page we nned to adjust so the loop
+	 * condition below will be met. The next element is the size of a
+	 * regular element and hence incrementing by 1
+	 */
+	if ((hw_cons & EQ_DESC_MAX_PAGE) == EQ_DESC_MAX_PAGE)
+		hw_cons++;
+
+	/* This function may never run in parallel with itself for a
+	 * specific bp, thus there is no need in "paired" read memory
+	 * barrier here.
+	 */
+	sw_cons = bp->eq_cons;
+	sw_prod = bp->eq_prod;
+
+	DP(BNX2X_MSG_SP, "EQ:  hw_cons %u  sw_cons %u bp->eq_spq_left %x\n",
+			hw_cons, sw_cons, atomic_read(&bp->eq_spq_left));
+
+	for (; sw_cons != hw_cons;
+	      sw_prod = NEXT_EQ_IDX(sw_prod), sw_cons = NEXT_EQ_IDX(sw_cons)) {
+
+
+		elem = &bp->eq_ring[EQ_DESC(sw_cons)];
+
+		cid = SW_CID(elem->message.data.cfc_del_event.cid);
+		opcode = elem->message.opcode;
+
+
+		/* handle eq element */
+		switch (opcode) {
+		case EVENT_RING_OPCODE_STAT_QUERY:
+			DP(NETIF_MSG_TIMER, "got statistics comp event %d\n",
+			   bp->stats_comp++);
+			/* nothing to do with stats comp */
+			goto next_spqe;
+
+		case EVENT_RING_OPCODE_CFC_DEL:
+			/* handle according to cid range */
+			/*
+			 * we may want to verify here that the bp state is
+			 * HALTING
+			 */
+			DP(BNX2X_MSG_SP,
+			   "got delete ramrod for MULTI[%d]\n", cid);
+#ifdef BCM_CNIC
+			if (!bnx2x_cnic_handle_cfc_del(bp, cid, elem))
+				goto next_spqe;
+#endif
+			q_obj = bnx2x_cid_to_q_obj(bp, cid);
+
+			if (q_obj->complete_cmd(bp, q_obj, BNX2X_Q_CMD_CFC_DEL))
+				break;
+
+
+
+			goto next_spqe;
+
+		case EVENT_RING_OPCODE_STOP_TRAFFIC:
+			DP(BNX2X_MSG_SP, "got STOP TRAFFIC\n");
+			if (f_obj->complete_cmd(bp, f_obj,
+						BNX2X_F_CMD_TX_STOP))
+				break;
+			bnx2x_dcbx_set_params(bp, BNX2X_DCBX_STATE_TX_PAUSED);
+			goto next_spqe;
+
+		case EVENT_RING_OPCODE_START_TRAFFIC:
+			DP(BNX2X_MSG_SP, "got START TRAFFIC\n");
+			if (f_obj->complete_cmd(bp, f_obj,
+						BNX2X_F_CMD_TX_START))
+				break;
+			bnx2x_dcbx_set_params(bp, BNX2X_DCBX_STATE_TX_RELEASED);
+			goto next_spqe;
+		case EVENT_RING_OPCODE_FUNCTION_START:
+			DP(BNX2X_MSG_SP, "got FUNC_START ramrod\n");
+			if (f_obj->complete_cmd(bp, f_obj, BNX2X_F_CMD_START))
+				break;
+
+			goto next_spqe;
+
+		case EVENT_RING_OPCODE_FUNCTION_STOP:
+			DP(BNX2X_MSG_SP, "got FUNC_STOP ramrod\n");
+			if (f_obj->complete_cmd(bp, f_obj, BNX2X_F_CMD_STOP))
+				break;
+
+			goto next_spqe;
+		}
+
+		switch (opcode | bp->state) {
+		case (EVENT_RING_OPCODE_RSS_UPDATE_RULES |
+		      BNX2X_STATE_OPEN):
+		case (EVENT_RING_OPCODE_RSS_UPDATE_RULES |
+		      BNX2X_STATE_OPENING_WAIT4_PORT):
+			cid = elem->message.data.eth_event.echo &
+				BNX2X_SWCID_MASK;
+			DP(BNX2X_MSG_SP, "got RSS_UPDATE ramrod. CID %d\n",
+			   cid);
+			rss_raw->clear_pending(rss_raw);
+			break;
+
+		case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_OPEN):
+		case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_DIAG):
+		case (EVENT_RING_OPCODE_SET_MAC |
+		      BNX2X_STATE_CLOSING_WAIT4_HALT):
+		case (EVENT_RING_OPCODE_CLASSIFICATION_RULES |
+		      BNX2X_STATE_OPEN):
+		case (EVENT_RING_OPCODE_CLASSIFICATION_RULES |
+		      BNX2X_STATE_DIAG):
+		case (EVENT_RING_OPCODE_CLASSIFICATION_RULES |
+		      BNX2X_STATE_CLOSING_WAIT4_HALT):
+			DP(BNX2X_MSG_SP, "got (un)set mac ramrod\n");
+			bnx2x_handle_classification_eqe(bp, elem);
+			break;
+
+		case (EVENT_RING_OPCODE_MULTICAST_RULES |
+		      BNX2X_STATE_OPEN):
+		case (EVENT_RING_OPCODE_MULTICAST_RULES |
+		      BNX2X_STATE_DIAG):
+		case (EVENT_RING_OPCODE_MULTICAST_RULES |
+		      BNX2X_STATE_CLOSING_WAIT4_HALT):
+			DP(BNX2X_MSG_SP, "got mcast ramrod\n");
+			bnx2x_handle_mcast_eqe(bp);
+			break;
+
+		case (EVENT_RING_OPCODE_FILTERS_RULES |
+		      BNX2X_STATE_OPEN):
+		case (EVENT_RING_OPCODE_FILTERS_RULES |
+		      BNX2X_STATE_DIAG):
+		case (EVENT_RING_OPCODE_FILTERS_RULES |
+		      BNX2X_STATE_CLOSING_WAIT4_HALT):
+			DP(BNX2X_MSG_SP, "got rx_mode ramrod\n");
+			bnx2x_handle_rx_mode_eqe(bp);
+			break;
+		default:
+			/* unknown event log error and continue */
+			BNX2X_ERR("Unknown EQ event %d, bp->state 0x%x\n",
+				  elem->message.opcode, bp->state);
+		}
+next_spqe:
+		spqe_cnt++;
+	} /* for */
+
+	smp_mb__before_atomic_inc();
+	atomic_add(spqe_cnt, &bp->eq_spq_left);
+
+	bp->eq_cons = sw_cons;
+	bp->eq_prod = sw_prod;
+	/* Make sure that above mem writes were issued towards the memory */
+	smp_wmb();
+
+	/* update producer */
+	bnx2x_update_eq_prod(bp, bp->eq_prod);
+}
+
+static void bnx2x_sp_task(struct work_struct *work)
+{
+	struct bnx2x *bp = container_of(work, struct bnx2x, sp_task.work);
+	u16 status;
+
+	status = bnx2x_update_dsb_idx(bp);
+/*	if (status == 0)				     */
+/*		BNX2X_ERR("spurious slowpath interrupt!\n"); */
+
+	DP(NETIF_MSG_INTR, "got a slowpath interrupt (status 0x%x)\n", status);
+
+	/* HW attentions */
+	if (status & BNX2X_DEF_SB_ATT_IDX) {
+		bnx2x_attn_int(bp);
+		status &= ~BNX2X_DEF_SB_ATT_IDX;
+	}
+
+	/* SP events: STAT_QUERY and others */
+	if (status & BNX2X_DEF_SB_IDX) {
+#ifdef BCM_CNIC
+		struct bnx2x_fastpath *fp = bnx2x_fcoe_fp(bp);
+
+		if ((!NO_FCOE(bp)) &&
+			(bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp))) {
+			/*
+			 * Prevent local bottom-halves from running as
+			 * we are going to change the local NAPI list.
+			 */
+			local_bh_disable();
+			napi_schedule(&bnx2x_fcoe(bp, napi));
+			local_bh_enable();
+		}
+#endif
+		/* Handle EQ completions */
+		bnx2x_eq_int(bp);
+
+		bnx2x_ack_sb(bp, bp->igu_dsb_id, USTORM_ID,
+			le16_to_cpu(bp->def_idx), IGU_INT_NOP, 1);
+
+		status &= ~BNX2X_DEF_SB_IDX;
+	}
+
+	if (unlikely(status))
+		DP(NETIF_MSG_INTR, "got an unknown interrupt! (status 0x%x)\n",
+		   status);
+
+	bnx2x_ack_sb(bp, bp->igu_dsb_id, ATTENTION_ID,
+	     le16_to_cpu(bp->def_att_idx), IGU_INT_ENABLE, 1);
+}
+
+irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance)
+{
+	struct net_device *dev = dev_instance;
+	struct bnx2x *bp = netdev_priv(dev);
+
+	bnx2x_ack_sb(bp, bp->igu_dsb_id, USTORM_ID, 0,
+		     IGU_INT_DISABLE, 0);
+
+#ifdef BNX2X_STOP_ON_ERROR
+	if (unlikely(bp->panic))
+		return IRQ_HANDLED;
+#endif
+
+#ifdef BCM_CNIC
+	{
+		struct cnic_ops *c_ops;
+
+		rcu_read_lock();
+		c_ops = rcu_dereference(bp->cnic_ops);
+		if (c_ops)
+			c_ops->cnic_handler(bp->cnic_data, NULL);
+		rcu_read_unlock();
+	}
+#endif
+	queue_delayed_work(bnx2x_wq, &bp->sp_task, 0);
+
+	return IRQ_HANDLED;
+}
+
+/* end of slow path */
+
+
+void bnx2x_drv_pulse(struct bnx2x *bp)
+{
+	SHMEM_WR(bp, func_mb[BP_FW_MB_IDX(bp)].drv_pulse_mb,
+		 bp->fw_drv_pulse_wr_seq);
+}
+
+
+static void bnx2x_timer(unsigned long data)
+{
+	u8 cos;
+	struct bnx2x *bp = (struct bnx2x *) data;
+
+	if (!netif_running(bp->dev))
+		return;
+
+	if (poll) {
+		struct bnx2x_fastpath *fp = &bp->fp[0];
+
+		for_each_cos_in_tx_queue(fp, cos)
+			bnx2x_tx_int(bp, &fp->txdata[cos]);
+		bnx2x_rx_int(fp, 1000);
+	}
+
+	if (!BP_NOMCP(bp)) {
+		int mb_idx = BP_FW_MB_IDX(bp);
+		u32 drv_pulse;
+		u32 mcp_pulse;
+
+		++bp->fw_drv_pulse_wr_seq;
+		bp->fw_drv_pulse_wr_seq &= DRV_PULSE_SEQ_MASK;
+		/* TBD - add SYSTEM_TIME */
+		drv_pulse = bp->fw_drv_pulse_wr_seq;
+		bnx2x_drv_pulse(bp);
+
+		mcp_pulse = (SHMEM_RD(bp, func_mb[mb_idx].mcp_pulse_mb) &
+			     MCP_PULSE_SEQ_MASK);
+		/* The delta between driver pulse and mcp response
+		 * should be 1 (before mcp response) or 0 (after mcp response)
+		 */
+		if ((drv_pulse != mcp_pulse) &&
+		    (drv_pulse != ((mcp_pulse + 1) & MCP_PULSE_SEQ_MASK))) {
+			/* someone lost a heartbeat... */
+			BNX2X_ERR("drv_pulse (0x%x) != mcp_pulse (0x%x)\n",
+				  drv_pulse, mcp_pulse);
+		}
+	}
+
+	if (bp->state == BNX2X_STATE_OPEN)
+		bnx2x_stats_handle(bp, STATS_EVENT_UPDATE);
+
+	mod_timer(&bp->timer, jiffies + bp->current_interval);
+}
+
+/* end of Statistics */
+
+/* nic init */
+
+/*
+ * nic init service functions
+ */
+
+static inline void bnx2x_fill(struct bnx2x *bp, u32 addr, int fill, u32 len)
+{
+	u32 i;
+	if (!(len%4) && !(addr%4))
+		for (i = 0; i < len; i += 4)
+			REG_WR(bp, addr + i, fill);
+	else
+		for (i = 0; i < len; i++)
+			REG_WR8(bp, addr + i, fill);
+
+}
+
+/* helper: writes FP SP data to FW - data_size in dwords */
+static inline void bnx2x_wr_fp_sb_data(struct bnx2x *bp,
+				       int fw_sb_id,
+				       u32 *sb_data_p,
+				       u32 data_size)
+{
+	int index;
+	for (index = 0; index < data_size; index++)
+		REG_WR(bp, BAR_CSTRORM_INTMEM +
+			CSTORM_STATUS_BLOCK_DATA_OFFSET(fw_sb_id) +
+			sizeof(u32)*index,
+			*(sb_data_p + index));
+}
+
+static inline void bnx2x_zero_fp_sb(struct bnx2x *bp, int fw_sb_id)
+{
+	u32 *sb_data_p;
+	u32 data_size = 0;
+	struct hc_status_block_data_e2 sb_data_e2;
+	struct hc_status_block_data_e1x sb_data_e1x;
+
+	/* disable the function first */
+	if (!CHIP_IS_E1x(bp)) {
+		memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2));
+		sb_data_e2.common.state = SB_DISABLED;
+		sb_data_e2.common.p_func.vf_valid = false;
+		sb_data_p = (u32 *)&sb_data_e2;
+		data_size = sizeof(struct hc_status_block_data_e2)/sizeof(u32);
+	} else {
+		memset(&sb_data_e1x, 0,
+		       sizeof(struct hc_status_block_data_e1x));
+		sb_data_e1x.common.state = SB_DISABLED;
+		sb_data_e1x.common.p_func.vf_valid = false;
+		sb_data_p = (u32 *)&sb_data_e1x;
+		data_size = sizeof(struct hc_status_block_data_e1x)/sizeof(u32);
+	}
+	bnx2x_wr_fp_sb_data(bp, fw_sb_id, sb_data_p, data_size);
+
+	bnx2x_fill(bp, BAR_CSTRORM_INTMEM +
+			CSTORM_STATUS_BLOCK_OFFSET(fw_sb_id), 0,
+			CSTORM_STATUS_BLOCK_SIZE);
+	bnx2x_fill(bp, BAR_CSTRORM_INTMEM +
+			CSTORM_SYNC_BLOCK_OFFSET(fw_sb_id), 0,
+			CSTORM_SYNC_BLOCK_SIZE);
+}
+
+/* helper:  writes SP SB data to FW */
+static inline void bnx2x_wr_sp_sb_data(struct bnx2x *bp,
+		struct hc_sp_status_block_data *sp_sb_data)
+{
+	int func = BP_FUNC(bp);
+	int i;
+	for (i = 0; i < sizeof(struct hc_sp_status_block_data)/sizeof(u32); i++)
+		REG_WR(bp, BAR_CSTRORM_INTMEM +
+			CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(func) +
+			i*sizeof(u32),
+			*((u32 *)sp_sb_data + i));
+}
+
+static inline void bnx2x_zero_sp_sb(struct bnx2x *bp)
+{
+	int func = BP_FUNC(bp);
+	struct hc_sp_status_block_data sp_sb_data;
+	memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data));
+
+	sp_sb_data.state = SB_DISABLED;
+	sp_sb_data.p_func.vf_valid = false;
+
+	bnx2x_wr_sp_sb_data(bp, &sp_sb_data);
+
+	bnx2x_fill(bp, BAR_CSTRORM_INTMEM +
+			CSTORM_SP_STATUS_BLOCK_OFFSET(func), 0,
+			CSTORM_SP_STATUS_BLOCK_SIZE);
+	bnx2x_fill(bp, BAR_CSTRORM_INTMEM +
+			CSTORM_SP_SYNC_BLOCK_OFFSET(func), 0,
+			CSTORM_SP_SYNC_BLOCK_SIZE);
+
+}
+
+
+static inline
+void bnx2x_setup_ndsb_state_machine(struct hc_status_block_sm *hc_sm,
+					   int igu_sb_id, int igu_seg_id)
+{
+	hc_sm->igu_sb_id = igu_sb_id;
+	hc_sm->igu_seg_id = igu_seg_id;
+	hc_sm->timer_value = 0xFF;
+	hc_sm->time_to_expire = 0xFFFFFFFF;
+}
+
+static void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid,
+			  u8 vf_valid, int fw_sb_id, int igu_sb_id)
+{
+	int igu_seg_id;
+
+	struct hc_status_block_data_e2 sb_data_e2;
+	struct hc_status_block_data_e1x sb_data_e1x;
+	struct hc_status_block_sm  *hc_sm_p;
+	int data_size;
+	u32 *sb_data_p;
+
+	if (CHIP_INT_MODE_IS_BC(bp))
+		igu_seg_id = HC_SEG_ACCESS_NORM;
+	else
+		igu_seg_id = IGU_SEG_ACCESS_NORM;
+
+	bnx2x_zero_fp_sb(bp, fw_sb_id);
+
+	if (!CHIP_IS_E1x(bp)) {
+		memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2));
+		sb_data_e2.common.state = SB_ENABLED;
+		sb_data_e2.common.p_func.pf_id = BP_FUNC(bp);
+		sb_data_e2.common.p_func.vf_id = vfid;
+		sb_data_e2.common.p_func.vf_valid = vf_valid;
+		sb_data_e2.common.p_func.vnic_id = BP_VN(bp);
+		sb_data_e2.common.same_igu_sb_1b = true;
+		sb_data_e2.common.host_sb_addr.hi = U64_HI(mapping);
+		sb_data_e2.common.host_sb_addr.lo = U64_LO(mapping);
+		hc_sm_p = sb_data_e2.common.state_machine;
+		sb_data_p = (u32 *)&sb_data_e2;
+		data_size = sizeof(struct hc_status_block_data_e2)/sizeof(u32);
+	} else {
+		memset(&sb_data_e1x, 0,
+		       sizeof(struct hc_status_block_data_e1x));
+		sb_data_e1x.common.state = SB_ENABLED;
+		sb_data_e1x.common.p_func.pf_id = BP_FUNC(bp);
+		sb_data_e1x.common.p_func.vf_id = 0xff;
+		sb_data_e1x.common.p_func.vf_valid = false;
+		sb_data_e1x.common.p_func.vnic_id = BP_VN(bp);
+		sb_data_e1x.common.same_igu_sb_1b = true;
+		sb_data_e1x.common.host_sb_addr.hi = U64_HI(mapping);
+		sb_data_e1x.common.host_sb_addr.lo = U64_LO(mapping);
+		hc_sm_p = sb_data_e1x.common.state_machine;
+		sb_data_p = (u32 *)&sb_data_e1x;
+		data_size = sizeof(struct hc_status_block_data_e1x)/sizeof(u32);
+	}
+
+	bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_RX_ID],
+				       igu_sb_id, igu_seg_id);
+	bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_TX_ID],
+				       igu_sb_id, igu_seg_id);
+
+	DP(NETIF_MSG_HW, "Init FW SB %d\n", fw_sb_id);
+
+	/* write indecies to HW */
+	bnx2x_wr_fp_sb_data(bp, fw_sb_id, sb_data_p, data_size);
+}
+
+static void bnx2x_update_coalesce_sb(struct bnx2x *bp, u8 fw_sb_id,
+				     u16 tx_usec, u16 rx_usec)
+{
+	bnx2x_update_coalesce_sb_index(bp, fw_sb_id, HC_INDEX_ETH_RX_CQ_CONS,
+				    false, rx_usec);
+	bnx2x_update_coalesce_sb_index(bp, fw_sb_id,
+				       HC_INDEX_ETH_TX_CQ_CONS_COS0, false,
+				       tx_usec);
+	bnx2x_update_coalesce_sb_index(bp, fw_sb_id,
+				       HC_INDEX_ETH_TX_CQ_CONS_COS1, false,
+				       tx_usec);
+	bnx2x_update_coalesce_sb_index(bp, fw_sb_id,
+				       HC_INDEX_ETH_TX_CQ_CONS_COS2, false,
+				       tx_usec);
+}
+
+static void bnx2x_init_def_sb(struct bnx2x *bp)
+{
+	struct host_sp_status_block *def_sb = bp->def_status_blk;
+	dma_addr_t mapping = bp->def_status_blk_mapping;
+	int igu_sp_sb_index;
+	int igu_seg_id;
+	int port = BP_PORT(bp);
+	int func = BP_FUNC(bp);
+	int reg_offset;
+	u64 section;
+	int index;
+	struct hc_sp_status_block_data sp_sb_data;
+	memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data));
+
+	if (CHIP_INT_MODE_IS_BC(bp)) {
+		igu_sp_sb_index = DEF_SB_IGU_ID;
+		igu_seg_id = HC_SEG_ACCESS_DEF;
+	} else {
+		igu_sp_sb_index = bp->igu_dsb_id;
+		igu_seg_id = IGU_SEG_ACCESS_DEF;
+	}
+
+	/* ATTN */
+	section = ((u64)mapping) + offsetof(struct host_sp_status_block,
+					    atten_status_block);
+	def_sb->atten_status_block.status_block_id = igu_sp_sb_index;
+
+	bp->attn_state = 0;
+
+	reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
+			     MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
+	for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) {
+		int sindex;
+		/* take care of sig[0]..sig[4] */
+		for (sindex = 0; sindex < 4; sindex++)
+			bp->attn_group[index].sig[sindex] =
+			   REG_RD(bp, reg_offset + sindex*0x4 + 0x10*index);
+
+		if (!CHIP_IS_E1x(bp))
+			/*
+			 * enable5 is separate from the rest of the registers,
+			 * and therefore the address skip is 4
+			 * and not 16 between the different groups
+			 */
+			bp->attn_group[index].sig[4] = REG_RD(bp,
+					reg_offset + 0x10 + 0x4*index);
+		else
+			bp->attn_group[index].sig[4] = 0;
+	}
+
+	if (bp->common.int_block == INT_BLOCK_HC) {
+		reg_offset = (port ? HC_REG_ATTN_MSG1_ADDR_L :
+				     HC_REG_ATTN_MSG0_ADDR_L);
+
+		REG_WR(bp, reg_offset, U64_LO(section));
+		REG_WR(bp, reg_offset + 4, U64_HI(section));
+	} else if (!CHIP_IS_E1x(bp)) {
+		REG_WR(bp, IGU_REG_ATTN_MSG_ADDR_L, U64_LO(section));
+		REG_WR(bp, IGU_REG_ATTN_MSG_ADDR_H, U64_HI(section));
+	}
+
+	section = ((u64)mapping) + offsetof(struct host_sp_status_block,
+					    sp_sb);
+
+	bnx2x_zero_sp_sb(bp);
+
+	sp_sb_data.state		= SB_ENABLED;
+	sp_sb_data.host_sb_addr.lo	= U64_LO(section);
+	sp_sb_data.host_sb_addr.hi	= U64_HI(section);
+	sp_sb_data.igu_sb_id		= igu_sp_sb_index;
+	sp_sb_data.igu_seg_id		= igu_seg_id;
+	sp_sb_data.p_func.pf_id		= func;
+	sp_sb_data.p_func.vnic_id	= BP_VN(bp);
+	sp_sb_data.p_func.vf_id		= 0xff;
+
+	bnx2x_wr_sp_sb_data(bp, &sp_sb_data);
+
+	bnx2x_ack_sb(bp, bp->igu_dsb_id, USTORM_ID, 0, IGU_INT_ENABLE, 0);
+}
+
+void bnx2x_update_coalesce(struct bnx2x *bp)
+{
+	int i;
+
+	for_each_eth_queue(bp, i)
+		bnx2x_update_coalesce_sb(bp, bp->fp[i].fw_sb_id,
+					 bp->tx_ticks, bp->rx_ticks);
+}
+
+static void bnx2x_init_sp_ring(struct bnx2x *bp)
+{
+	spin_lock_init(&bp->spq_lock);
+	atomic_set(&bp->cq_spq_left, MAX_SPQ_PENDING);
+
+	bp->spq_prod_idx = 0;
+	bp->dsb_sp_prod = BNX2X_SP_DSB_INDEX;
+	bp->spq_prod_bd = bp->spq;
+	bp->spq_last_bd = bp->spq_prod_bd + MAX_SP_DESC_CNT;
+}
+
+static void bnx2x_init_eq_ring(struct bnx2x *bp)
+{
+	int i;
+	for (i = 1; i <= NUM_EQ_PAGES; i++) {
+		union event_ring_elem *elem =
+			&bp->eq_ring[EQ_DESC_CNT_PAGE * i - 1];
+
+		elem->next_page.addr.hi =
+			cpu_to_le32(U64_HI(bp->eq_mapping +
+				   BCM_PAGE_SIZE * (i % NUM_EQ_PAGES)));
+		elem->next_page.addr.lo =
+			cpu_to_le32(U64_LO(bp->eq_mapping +
+				   BCM_PAGE_SIZE*(i % NUM_EQ_PAGES)));
+	}
+	bp->eq_cons = 0;
+	bp->eq_prod = NUM_EQ_DESC;
+	bp->eq_cons_sb = BNX2X_EQ_INDEX;
+	/* we want a warning message before it gets rought... */
+	atomic_set(&bp->eq_spq_left,
+		min_t(int, MAX_SP_DESC_CNT - MAX_SPQ_PENDING, NUM_EQ_DESC) - 1);
+}
+
+
+/* called with netif_addr_lock_bh() */
+void bnx2x_set_q_rx_mode(struct bnx2x *bp, u8 cl_id,
+			 unsigned long rx_mode_flags,
+			 unsigned long rx_accept_flags,
+			 unsigned long tx_accept_flags,
+			 unsigned long ramrod_flags)
+{
+	struct bnx2x_rx_mode_ramrod_params ramrod_param;
+	int rc;
+
+	memset(&ramrod_param, 0, sizeof(ramrod_param));
+
+	/* Prepare ramrod parameters */
+	ramrod_param.cid = 0;
+	ramrod_param.cl_id = cl_id;
+	ramrod_param.rx_mode_obj = &bp->rx_mode_obj;
+	ramrod_param.func_id = BP_FUNC(bp);
+
+	ramrod_param.pstate = &bp->sp_state;
+	ramrod_param.state = BNX2X_FILTER_RX_MODE_PENDING;
+
+	ramrod_param.rdata = bnx2x_sp(bp, rx_mode_rdata);
+	ramrod_param.rdata_mapping = bnx2x_sp_mapping(bp, rx_mode_rdata);
+
+	set_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state);
+
+	ramrod_param.ramrod_flags = ramrod_flags;
+	ramrod_param.rx_mode_flags = rx_mode_flags;
+
+	ramrod_param.rx_accept_flags = rx_accept_flags;
+	ramrod_param.tx_accept_flags = tx_accept_flags;
+
+	rc = bnx2x_config_rx_mode(bp, &ramrod_param);
+	if (rc < 0) {
+		BNX2X_ERR("Set rx_mode %d failed\n", bp->rx_mode);
+		return;
+	}
+}
+
+/* called with netif_addr_lock_bh() */
+void bnx2x_set_storm_rx_mode(struct bnx2x *bp)
+{
+	unsigned long rx_mode_flags = 0, ramrod_flags = 0;
+	unsigned long rx_accept_flags = 0, tx_accept_flags = 0;
+
+#ifdef BCM_CNIC
+	if (!NO_FCOE(bp))
+
+		/* Configure rx_mode of FCoE Queue */
+		__set_bit(BNX2X_RX_MODE_FCOE_ETH, &rx_mode_flags);
+#endif
+
+	switch (bp->rx_mode) {
+	case BNX2X_RX_MODE_NONE:
+		/*
+		 * 'drop all' supersedes any accept flags that may have been
+		 * passed to the function.
+		 */
+		break;
+	case BNX2X_RX_MODE_NORMAL:
+		__set_bit(BNX2X_ACCEPT_UNICAST, &rx_accept_flags);
+		__set_bit(BNX2X_ACCEPT_MULTICAST, &rx_accept_flags);
+		__set_bit(BNX2X_ACCEPT_BROADCAST, &rx_accept_flags);
+
+		/* internal switching mode */
+		__set_bit(BNX2X_ACCEPT_UNICAST, &tx_accept_flags);
+		__set_bit(BNX2X_ACCEPT_MULTICAST, &tx_accept_flags);
+		__set_bit(BNX2X_ACCEPT_BROADCAST, &tx_accept_flags);
+
+		break;
+	case BNX2X_RX_MODE_ALLMULTI:
+		__set_bit(BNX2X_ACCEPT_UNICAST, &rx_accept_flags);
+		__set_bit(BNX2X_ACCEPT_ALL_MULTICAST, &rx_accept_flags);
+		__set_bit(BNX2X_ACCEPT_BROADCAST, &rx_accept_flags);
+
+		/* internal switching mode */
+		__set_bit(BNX2X_ACCEPT_UNICAST, &tx_accept_flags);
+		__set_bit(BNX2X_ACCEPT_ALL_MULTICAST, &tx_accept_flags);
+		__set_bit(BNX2X_ACCEPT_BROADCAST, &tx_accept_flags);
+
+		break;
+	case BNX2X_RX_MODE_PROMISC:
+		/* According to deffinition of SI mode, iface in promisc mode
+		 * should receive matched and unmatched (in resolution of port)
+		 * unicast packets.
+		 */
+		__set_bit(BNX2X_ACCEPT_UNMATCHED, &rx_accept_flags);
+		__set_bit(BNX2X_ACCEPT_UNICAST, &rx_accept_flags);
+		__set_bit(BNX2X_ACCEPT_ALL_MULTICAST, &rx_accept_flags);
+		__set_bit(BNX2X_ACCEPT_BROADCAST, &rx_accept_flags);
+
+		/* internal switching mode */
+		__set_bit(BNX2X_ACCEPT_ALL_MULTICAST, &tx_accept_flags);
+		__set_bit(BNX2X_ACCEPT_BROADCAST, &tx_accept_flags);
+
+		if (IS_MF_SI(bp))
+			__set_bit(BNX2X_ACCEPT_ALL_UNICAST, &tx_accept_flags);
+		else
+			__set_bit(BNX2X_ACCEPT_UNICAST, &tx_accept_flags);
+
+		break;
+	default:
+		BNX2X_ERR("Unknown rx_mode: %d\n", bp->rx_mode);
+		return;
+	}
+
+	if (bp->rx_mode != BNX2X_RX_MODE_NONE) {
+		__set_bit(BNX2X_ACCEPT_ANY_VLAN, &rx_accept_flags);
+		__set_bit(BNX2X_ACCEPT_ANY_VLAN, &tx_accept_flags);
+	}
+
+	__set_bit(RAMROD_RX, &ramrod_flags);
+	__set_bit(RAMROD_TX, &ramrod_flags);
+
+	bnx2x_set_q_rx_mode(bp, bp->fp->cl_id, rx_mode_flags, rx_accept_flags,
+			    tx_accept_flags, ramrod_flags);
+}
+
+static void bnx2x_init_internal_common(struct bnx2x *bp)
+{
+	int i;
+
+	if (IS_MF_SI(bp))
+		/*
+		 * In switch independent mode, the TSTORM needs to accept
+		 * packets that failed classification, since approximate match
+		 * mac addresses aren't written to NIG LLH
+		 */
+		REG_WR8(bp, BAR_TSTRORM_INTMEM +
+			    TSTORM_ACCEPT_CLASSIFY_FAILED_OFFSET, 2);
+	else if (!CHIP_IS_E1(bp)) /* 57710 doesn't support MF */
+		REG_WR8(bp, BAR_TSTRORM_INTMEM +
+			    TSTORM_ACCEPT_CLASSIFY_FAILED_OFFSET, 0);
+
+	/* Zero this manually as its initialization is
+	   currently missing in the initTool */
+	for (i = 0; i < (USTORM_AGG_DATA_SIZE >> 2); i++)
+		REG_WR(bp, BAR_USTRORM_INTMEM +
+		       USTORM_AGG_DATA_OFFSET + i * 4, 0);
+	if (!CHIP_IS_E1x(bp)) {
+		REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_IGU_MODE_OFFSET,
+			CHIP_INT_MODE_IS_BC(bp) ?
+			HC_IGU_BC_MODE : HC_IGU_NBC_MODE);
+	}
+}
+
+static void bnx2x_init_internal(struct bnx2x *bp, u32 load_code)
+{
+	switch (load_code) {
+	case FW_MSG_CODE_DRV_LOAD_COMMON:
+	case FW_MSG_CODE_DRV_LOAD_COMMON_CHIP:
+		bnx2x_init_internal_common(bp);
+		/* no break */
+
+	case FW_MSG_CODE_DRV_LOAD_PORT:
+		/* nothing to do */
+		/* no break */
+
+	case FW_MSG_CODE_DRV_LOAD_FUNCTION:
+		/* internal memory per function is
+		   initialized inside bnx2x_pf_init */
+		break;
+
+	default:
+		BNX2X_ERR("Unknown load_code (0x%x) from MCP\n", load_code);
+		break;
+	}
+}
+
+static inline u8 bnx2x_fp_igu_sb_id(struct bnx2x_fastpath *fp)
+{
+	return fp->bp->igu_base_sb + fp->index + CNIC_PRESENT;
+}
+
+static inline u8 bnx2x_fp_fw_sb_id(struct bnx2x_fastpath *fp)
+{
+	return fp->bp->base_fw_ndsb + fp->index + CNIC_PRESENT;
+}
+
+static inline u8 bnx2x_fp_cl_id(struct bnx2x_fastpath *fp)
+{
+	if (CHIP_IS_E1x(fp->bp))
+		return BP_L_ID(fp->bp) + fp->index;
+	else	/* We want Client ID to be the same as IGU SB ID for 57712 */
+		return bnx2x_fp_igu_sb_id(fp);
+}
+
+static void bnx2x_init_eth_fp(struct bnx2x *bp, int fp_idx)
+{
+	struct bnx2x_fastpath *fp = &bp->fp[fp_idx];
+	u8 cos;
+	unsigned long q_type = 0;
+	u32 cids[BNX2X_MULTI_TX_COS] = { 0 };
+
+	fp->cid = fp_idx;
+	fp->cl_id = bnx2x_fp_cl_id(fp);
+	fp->fw_sb_id = bnx2x_fp_fw_sb_id(fp);
+	fp->igu_sb_id = bnx2x_fp_igu_sb_id(fp);
+	/* qZone id equals to FW (per path) client id */
+	fp->cl_qzone_id  = bnx2x_fp_qzone_id(fp);
+
+	/* init shortcut */
+	fp->ustorm_rx_prods_offset = bnx2x_rx_ustorm_prods_offset(fp);
+	/* Setup SB indicies */
+	fp->rx_cons_sb = BNX2X_RX_SB_INDEX;
+
+	/* Configure Queue State object */
+	__set_bit(BNX2X_Q_TYPE_HAS_RX, &q_type);
+	__set_bit(BNX2X_Q_TYPE_HAS_TX, &q_type);
+
+	BUG_ON(fp->max_cos > BNX2X_MULTI_TX_COS);
+
+	/* init tx data */
+	for_each_cos_in_tx_queue(fp, cos) {
+		bnx2x_init_txdata(bp, &fp->txdata[cos],
+				  CID_COS_TO_TX_ONLY_CID(fp->cid, cos),
+				  FP_COS_TO_TXQ(fp, cos),
+				  BNX2X_TX_SB_INDEX_BASE + cos);
+		cids[cos] = fp->txdata[cos].cid;
+	}
+
+	bnx2x_init_queue_obj(bp, &fp->q_obj, fp->cl_id, cids, fp->max_cos,
+			     BP_FUNC(bp), bnx2x_sp(bp, q_rdata),
+			     bnx2x_sp_mapping(bp, q_rdata), q_type);
+
+	/**
+	 * Configure classification DBs: Always enable Tx switching
+	 */
+	bnx2x_init_vlan_mac_fp_objs(fp, BNX2X_OBJ_TYPE_RX_TX);
+
+	DP(NETIF_MSG_IFUP, "queue[%d]:  bnx2x_init_sb(%p,%p)  "
+				   "cl_id %d  fw_sb %d  igu_sb %d\n",
+		   fp_idx, bp, fp->status_blk.e2_sb, fp->cl_id, fp->fw_sb_id,
+		   fp->igu_sb_id);
+	bnx2x_init_sb(bp, fp->status_blk_mapping, BNX2X_VF_ID_INVALID, false,
+		      fp->fw_sb_id, fp->igu_sb_id);
+
+	bnx2x_update_fpsb_idx(fp);
+}
+
+void bnx2x_nic_init(struct bnx2x *bp, u32 load_code)
+{
+	int i;
+
+	for_each_eth_queue(bp, i)
+		bnx2x_init_eth_fp(bp, i);
+#ifdef BCM_CNIC
+	if (!NO_FCOE(bp))
+		bnx2x_init_fcoe_fp(bp);
+
+	bnx2x_init_sb(bp, bp->cnic_sb_mapping,
+		      BNX2X_VF_ID_INVALID, false,
+		      bnx2x_cnic_fw_sb_id(bp), bnx2x_cnic_igu_sb_id(bp));
+
+#endif
+
+	/* Initialize MOD_ABS interrupts */
+	bnx2x_init_mod_abs_int(bp, &bp->link_vars, bp->common.chip_id,
+			       bp->common.shmem_base, bp->common.shmem2_base,
+			       BP_PORT(bp));
+	/* ensure status block indices were read */
+	rmb();
+
+	bnx2x_init_def_sb(bp);
+	bnx2x_update_dsb_idx(bp);
+	bnx2x_init_rx_rings(bp);
+	bnx2x_init_tx_rings(bp);
+	bnx2x_init_sp_ring(bp);
+	bnx2x_init_eq_ring(bp);
+	bnx2x_init_internal(bp, load_code);
+	bnx2x_pf_init(bp);
+	bnx2x_stats_init(bp);
+
+	/* flush all before enabling interrupts */
+	mb();
+	mmiowb();
+
+	bnx2x_int_enable(bp);
+
+	/* Check for SPIO5 */
+	bnx2x_attn_int_deasserted0(bp,
+		REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + BP_PORT(bp)*4) &
+				   AEU_INPUTS_ATTN_BITS_SPIO5);
+}
+
+/* end of nic init */
+
+/*
+ * gzip service functions
+ */
+
+static int bnx2x_gunzip_init(struct bnx2x *bp)
+{
+	bp->gunzip_buf = dma_alloc_coherent(&bp->pdev->dev, FW_BUF_SIZE,
+					    &bp->gunzip_mapping, GFP_KERNEL);
+	if (bp->gunzip_buf  == NULL)
+		goto gunzip_nomem1;
+
+	bp->strm = kmalloc(sizeof(*bp->strm), GFP_KERNEL);
+	if (bp->strm  == NULL)
+		goto gunzip_nomem2;
+
+	bp->strm->workspace = vmalloc(zlib_inflate_workspacesize());
+	if (bp->strm->workspace == NULL)
+		goto gunzip_nomem3;
+
+	return 0;
+
+gunzip_nomem3:
+	kfree(bp->strm);
+	bp->strm = NULL;
+
+gunzip_nomem2:
+	dma_free_coherent(&bp->pdev->dev, FW_BUF_SIZE, bp->gunzip_buf,
+			  bp->gunzip_mapping);
+	bp->gunzip_buf = NULL;
+
+gunzip_nomem1:
+	netdev_err(bp->dev, "Cannot allocate firmware buffer for"
+	       " un-compression\n");
+	return -ENOMEM;
+}
+
+static void bnx2x_gunzip_end(struct bnx2x *bp)
+{
+	if (bp->strm) {
+		vfree(bp->strm->workspace);
+		kfree(bp->strm);
+		bp->strm = NULL;
+	}
+
+	if (bp->gunzip_buf) {
+		dma_free_coherent(&bp->pdev->dev, FW_BUF_SIZE, bp->gunzip_buf,
+				  bp->gunzip_mapping);
+		bp->gunzip_buf = NULL;
+	}
+}
+
+static int bnx2x_gunzip(struct bnx2x *bp, const u8 *zbuf, int len)
+{
+	int n, rc;
+
+	/* check gzip header */
+	if ((zbuf[0] != 0x1f) || (zbuf[1] != 0x8b) || (zbuf[2] != Z_DEFLATED)) {
+		BNX2X_ERR("Bad gzip header\n");
+		return -EINVAL;
+	}
+
+	n = 10;
+
+#define FNAME				0x8
+
+	if (zbuf[3] & FNAME)
+		while ((zbuf[n++] != 0) && (n < len));
+
+	bp->strm->next_in = (typeof(bp->strm->next_in))zbuf + n;
+	bp->strm->avail_in = len - n;
+	bp->strm->next_out = bp->gunzip_buf;
+	bp->strm->avail_out = FW_BUF_SIZE;
+
+	rc = zlib_inflateInit2(bp->strm, -MAX_WBITS);
+	if (rc != Z_OK)
+		return rc;
+
+	rc = zlib_inflate(bp->strm, Z_FINISH);
+	if ((rc != Z_OK) && (rc != Z_STREAM_END))
+		netdev_err(bp->dev, "Firmware decompression error: %s\n",
+			   bp->strm->msg);
+
+	bp->gunzip_outlen = (FW_BUF_SIZE - bp->strm->avail_out);
+	if (bp->gunzip_outlen & 0x3)
+		netdev_err(bp->dev, "Firmware decompression error:"
+				    " gunzip_outlen (%d) not aligned\n",
+				bp->gunzip_outlen);
+	bp->gunzip_outlen >>= 2;
+
+	zlib_inflateEnd(bp->strm);
+
+	if (rc == Z_STREAM_END)
+		return 0;
+
+	return rc;
+}
+
+/* nic load/unload */
+
+/*
+ * General service functions
+ */
+
+/* send a NIG loopback debug packet */
+static void bnx2x_lb_pckt(struct bnx2x *bp)
+{
+	u32 wb_write[3];
+
+	/* Ethernet source and destination addresses */
+	wb_write[0] = 0x55555555;
+	wb_write[1] = 0x55555555;
+	wb_write[2] = 0x20;		/* SOP */
+	REG_WR_DMAE(bp, NIG_REG_DEBUG_PACKET_LB, wb_write, 3);
+
+	/* NON-IP protocol */
+	wb_write[0] = 0x09000000;
+	wb_write[1] = 0x55555555;
+	wb_write[2] = 0x10;		/* EOP, eop_bvalid = 0 */
+	REG_WR_DMAE(bp, NIG_REG_DEBUG_PACKET_LB, wb_write, 3);
+}
+
+/* some of the internal memories
+ * are not directly readable from the driver
+ * to test them we send debug packets
+ */
+static int bnx2x_int_mem_test(struct bnx2x *bp)
+{
+	int factor;
+	int count, i;
+	u32 val = 0;
+
+	if (CHIP_REV_IS_FPGA(bp))
+		factor = 120;
+	else if (CHIP_REV_IS_EMUL(bp))
+		factor = 200;
+	else
+		factor = 1;
+
+	/* Disable inputs of parser neighbor blocks */
+	REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x0);
+	REG_WR(bp, TCM_REG_PRS_IFEN, 0x0);
+	REG_WR(bp, CFC_REG_DEBUG0, 0x1);
+	REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x0);
+
+	/*  Write 0 to parser credits for CFC search request */
+	REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0);
+
+	/* send Ethernet packet */
+	bnx2x_lb_pckt(bp);
+
+	/* TODO do i reset NIG statistic? */
+	/* Wait until NIG register shows 1 packet of size 0x10 */
+	count = 1000 * factor;
+	while (count) {
+
+		bnx2x_read_dmae(bp, NIG_REG_STAT2_BRB_OCTET, 2);
+		val = *bnx2x_sp(bp, wb_data[0]);
+		if (val == 0x10)
+			break;
+
+		msleep(10);
+		count--;
+	}
+	if (val != 0x10) {
+		BNX2X_ERR("NIG timeout  val = 0x%x\n", val);
+		return -1;
+	}
+
+	/* Wait until PRS register shows 1 packet */
+	count = 1000 * factor;
+	while (count) {
+		val = REG_RD(bp, PRS_REG_NUM_OF_PACKETS);
+		if (val == 1)
+			break;
+
+		msleep(10);
+		count--;
+	}
+	if (val != 0x1) {
+		BNX2X_ERR("PRS timeout val = 0x%x\n", val);
+		return -2;
+	}
+
+	/* Reset and init BRB, PRS */
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 0x03);
+	msleep(50);
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03);
+	msleep(50);
+	bnx2x_init_block(bp, BLOCK_BRB1, PHASE_COMMON);
+	bnx2x_init_block(bp, BLOCK_PRS, PHASE_COMMON);
+
+	DP(NETIF_MSG_HW, "part2\n");
+
+	/* Disable inputs of parser neighbor blocks */
+	REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x0);
+	REG_WR(bp, TCM_REG_PRS_IFEN, 0x0);
+	REG_WR(bp, CFC_REG_DEBUG0, 0x1);
+	REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x0);
+
+	/* Write 0 to parser credits for CFC search request */
+	REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0);
+
+	/* send 10 Ethernet packets */
+	for (i = 0; i < 10; i++)
+		bnx2x_lb_pckt(bp);
+
+	/* Wait until NIG register shows 10 + 1
+	   packets of size 11*0x10 = 0xb0 */
+	count = 1000 * factor;
+	while (count) {
+
+		bnx2x_read_dmae(bp, NIG_REG_STAT2_BRB_OCTET, 2);
+		val = *bnx2x_sp(bp, wb_data[0]);
+		if (val == 0xb0)
+			break;
+
+		msleep(10);
+		count--;
+	}
+	if (val != 0xb0) {
+		BNX2X_ERR("NIG timeout  val = 0x%x\n", val);
+		return -3;
+	}
+
+	/* Wait until PRS register shows 2 packets */
+	val = REG_RD(bp, PRS_REG_NUM_OF_PACKETS);
+	if (val != 2)
+		BNX2X_ERR("PRS timeout  val = 0x%x\n", val);
+
+	/* Write 1 to parser credits for CFC search request */
+	REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x1);
+
+	/* Wait until PRS register shows 3 packets */
+	msleep(10 * factor);
+	/* Wait until NIG register shows 1 packet of size 0x10 */
+	val = REG_RD(bp, PRS_REG_NUM_OF_PACKETS);
+	if (val != 3)
+		BNX2X_ERR("PRS timeout  val = 0x%x\n", val);
+
+	/* clear NIG EOP FIFO */
+	for (i = 0; i < 11; i++)
+		REG_RD(bp, NIG_REG_INGRESS_EOP_LB_FIFO);
+	val = REG_RD(bp, NIG_REG_INGRESS_EOP_LB_EMPTY);
+	if (val != 1) {
+		BNX2X_ERR("clear of NIG failed\n");
+		return -4;
+	}
+
+	/* Reset and init BRB, PRS, NIG */
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 0x03);
+	msleep(50);
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03);
+	msleep(50);
+	bnx2x_init_block(bp, BLOCK_BRB1, PHASE_COMMON);
+	bnx2x_init_block(bp, BLOCK_PRS, PHASE_COMMON);
+#ifndef BCM_CNIC
+	/* set NIC mode */
+	REG_WR(bp, PRS_REG_NIC_MODE, 1);
+#endif
+
+	/* Enable inputs of parser neighbor blocks */
+	REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x7fffffff);
+	REG_WR(bp, TCM_REG_PRS_IFEN, 0x1);
+	REG_WR(bp, CFC_REG_DEBUG0, 0x0);
+	REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x1);
+
+	DP(NETIF_MSG_HW, "done\n");
+
+	return 0; /* OK */
+}
+
+static void bnx2x_enable_blocks_attention(struct bnx2x *bp)
+{
+	REG_WR(bp, PXP_REG_PXP_INT_MASK_0, 0);
+	if (!CHIP_IS_E1x(bp))
+		REG_WR(bp, PXP_REG_PXP_INT_MASK_1, 0x40);
+	else
+		REG_WR(bp, PXP_REG_PXP_INT_MASK_1, 0);
+	REG_WR(bp, DORQ_REG_DORQ_INT_MASK, 0);
+	REG_WR(bp, CFC_REG_CFC_INT_MASK, 0);
+	/*
+	 * mask read length error interrupts in brb for parser
+	 * (parsing unit and 'checksum and crc' unit)
+	 * these errors are legal (PU reads fixed length and CAC can cause
+	 * read length error on truncated packets)
+	 */
+	REG_WR(bp, BRB1_REG_BRB1_INT_MASK, 0xFC00);
+	REG_WR(bp, QM_REG_QM_INT_MASK, 0);
+	REG_WR(bp, TM_REG_TM_INT_MASK, 0);
+	REG_WR(bp, XSDM_REG_XSDM_INT_MASK_0, 0);
+	REG_WR(bp, XSDM_REG_XSDM_INT_MASK_1, 0);
+	REG_WR(bp, XCM_REG_XCM_INT_MASK, 0);
+/*	REG_WR(bp, XSEM_REG_XSEM_INT_MASK_0, 0); */
+/*	REG_WR(bp, XSEM_REG_XSEM_INT_MASK_1, 0); */
+	REG_WR(bp, USDM_REG_USDM_INT_MASK_0, 0);
+	REG_WR(bp, USDM_REG_USDM_INT_MASK_1, 0);
+	REG_WR(bp, UCM_REG_UCM_INT_MASK, 0);
+/*	REG_WR(bp, USEM_REG_USEM_INT_MASK_0, 0); */
+/*	REG_WR(bp, USEM_REG_USEM_INT_MASK_1, 0); */
+	REG_WR(bp, GRCBASE_UPB + PB_REG_PB_INT_MASK, 0);
+	REG_WR(bp, CSDM_REG_CSDM_INT_MASK_0, 0);
+	REG_WR(bp, CSDM_REG_CSDM_INT_MASK_1, 0);
+	REG_WR(bp, CCM_REG_CCM_INT_MASK, 0);
+/*	REG_WR(bp, CSEM_REG_CSEM_INT_MASK_0, 0); */
+/*	REG_WR(bp, CSEM_REG_CSEM_INT_MASK_1, 0); */
+
+	if (CHIP_REV_IS_FPGA(bp))
+		REG_WR(bp, PXP2_REG_PXP2_INT_MASK_0, 0x580000);
+	else if (!CHIP_IS_E1x(bp))
+		REG_WR(bp, PXP2_REG_PXP2_INT_MASK_0,
+			   (PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF
+				| PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT
+				| PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN
+				| PXP2_PXP2_INT_MASK_0_REG_PGL_READ_BLOCKED
+				| PXP2_PXP2_INT_MASK_0_REG_PGL_WRITE_BLOCKED));
+	else
+		REG_WR(bp, PXP2_REG_PXP2_INT_MASK_0, 0x480000);
+	REG_WR(bp, TSDM_REG_TSDM_INT_MASK_0, 0);
+	REG_WR(bp, TSDM_REG_TSDM_INT_MASK_1, 0);
+	REG_WR(bp, TCM_REG_TCM_INT_MASK, 0);
+/*	REG_WR(bp, TSEM_REG_TSEM_INT_MASK_0, 0); */
+
+	if (!CHIP_IS_E1x(bp))
+		/* enable VFC attentions: bits 11 and 12, bits 31:13 reserved */
+		REG_WR(bp, TSEM_REG_TSEM_INT_MASK_1, 0x07ff);
+
+	REG_WR(bp, CDU_REG_CDU_INT_MASK, 0);
+	REG_WR(bp, DMAE_REG_DMAE_INT_MASK, 0);
+/*	REG_WR(bp, MISC_REG_MISC_INT_MASK, 0); */
+	REG_WR(bp, PBF_REG_PBF_INT_MASK, 0x18);		/* bit 3,4 masked */
+}
+
+static void bnx2x_reset_common(struct bnx2x *bp)
+{
+	u32 val = 0x1400;
+
+	/* reset_common */
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
+	       0xd3ffff7f);
+
+	if (CHIP_IS_E3(bp)) {
+		val |= MISC_REGISTERS_RESET_REG_2_MSTAT0;
+		val |= MISC_REGISTERS_RESET_REG_2_MSTAT1;
+	}
+
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, val);
+}
+
+static void bnx2x_setup_dmae(struct bnx2x *bp)
+{
+	bp->dmae_ready = 0;
+	spin_lock_init(&bp->dmae_lock);
+}
+
+static void bnx2x_init_pxp(struct bnx2x *bp)
+{
+	u16 devctl;
+	int r_order, w_order;
+
+	pci_read_config_word(bp->pdev,
+			     pci_pcie_cap(bp->pdev) + PCI_EXP_DEVCTL, &devctl);
+	DP(NETIF_MSG_HW, "read 0x%x from devctl\n", devctl);
+	w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5);
+	if (bp->mrrs == -1)
+		r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12);
+	else {
+		DP(NETIF_MSG_HW, "force read order to %d\n", bp->mrrs);
+		r_order = bp->mrrs;
+	}
+
+	bnx2x_init_pxp_arb(bp, r_order, w_order);
+}
+
+static void bnx2x_setup_fan_failure_detection(struct bnx2x *bp)
+{
+	int is_required;
+	u32 val;
+	int port;
+
+	if (BP_NOMCP(bp))
+		return;
+
+	is_required = 0;
+	val = SHMEM_RD(bp, dev_info.shared_hw_config.config2) &
+	      SHARED_HW_CFG_FAN_FAILURE_MASK;
+
+	if (val == SHARED_HW_CFG_FAN_FAILURE_ENABLED)
+		is_required = 1;
+
+	/*
+	 * The fan failure mechanism is usually related to the PHY type since
+	 * the power consumption of the board is affected by the PHY. Currently,
+	 * fan is required for most designs with SFX7101, BCM8727 and BCM8481.
+	 */
+	else if (val == SHARED_HW_CFG_FAN_FAILURE_PHY_TYPE)
+		for (port = PORT_0; port < PORT_MAX; port++) {
+			is_required |=
+				bnx2x_fan_failure_det_req(
+					bp,
+					bp->common.shmem_base,
+					bp->common.shmem2_base,
+					port);
+		}
+
+	DP(NETIF_MSG_HW, "fan detection setting: %d\n", is_required);
+
+	if (is_required == 0)
+		return;
+
+	/* Fan failure is indicated by SPIO 5 */
+	bnx2x_set_spio(bp, MISC_REGISTERS_SPIO_5,
+		       MISC_REGISTERS_SPIO_INPUT_HI_Z);
+
+	/* set to active low mode */
+	val = REG_RD(bp, MISC_REG_SPIO_INT);
+	val |= ((1 << MISC_REGISTERS_SPIO_5) <<
+					MISC_REGISTERS_SPIO_INT_OLD_SET_POS);
+	REG_WR(bp, MISC_REG_SPIO_INT, val);
+
+	/* enable interrupt to signal the IGU */
+	val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN);
+	val |= (1 << MISC_REGISTERS_SPIO_5);
+	REG_WR(bp, MISC_REG_SPIO_EVENT_EN, val);
+}
+
+static void bnx2x_pretend_func(struct bnx2x *bp, u8 pretend_func_num)
+{
+	u32 offset = 0;
+
+	if (CHIP_IS_E1(bp))
+		return;
+	if (CHIP_IS_E1H(bp) && (pretend_func_num >= E1H_FUNC_MAX))
+		return;
+
+	switch (BP_ABS_FUNC(bp)) {
+	case 0:
+		offset = PXP2_REG_PGL_PRETEND_FUNC_F0;
+		break;
+	case 1:
+		offset = PXP2_REG_PGL_PRETEND_FUNC_F1;
+		break;
+	case 2:
+		offset = PXP2_REG_PGL_PRETEND_FUNC_F2;
+		break;
+	case 3:
+		offset = PXP2_REG_PGL_PRETEND_FUNC_F3;
+		break;
+	case 4:
+		offset = PXP2_REG_PGL_PRETEND_FUNC_F4;
+		break;
+	case 5:
+		offset = PXP2_REG_PGL_PRETEND_FUNC_F5;
+		break;
+	case 6:
+		offset = PXP2_REG_PGL_PRETEND_FUNC_F6;
+		break;
+	case 7:
+		offset = PXP2_REG_PGL_PRETEND_FUNC_F7;
+		break;
+	default:
+		return;
+	}
+
+	REG_WR(bp, offset, pretend_func_num);
+	REG_RD(bp, offset);
+	DP(NETIF_MSG_HW, "Pretending to func %d\n", pretend_func_num);
+}
+
+void bnx2x_pf_disable(struct bnx2x *bp)
+{
+	u32 val = REG_RD(bp, IGU_REG_PF_CONFIGURATION);
+	val &= ~IGU_PF_CONF_FUNC_EN;
+
+	REG_WR(bp, IGU_REG_PF_CONFIGURATION, val);
+	REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0);
+	REG_WR(bp, CFC_REG_WEAK_ENABLE_PF, 0);
+}
+
+static inline void bnx2x__common_init_phy(struct bnx2x *bp)
+{
+	u32 shmem_base[2], shmem2_base[2];
+	shmem_base[0] =  bp->common.shmem_base;
+	shmem2_base[0] = bp->common.shmem2_base;
+	if (!CHIP_IS_E1x(bp)) {
+		shmem_base[1] =
+			SHMEM2_RD(bp, other_shmem_base_addr);
+		shmem2_base[1] =
+			SHMEM2_RD(bp, other_shmem2_base_addr);
+	}
+	bnx2x_acquire_phy_lock(bp);
+	bnx2x_common_init_phy(bp, shmem_base, shmem2_base,
+			      bp->common.chip_id);
+	bnx2x_release_phy_lock(bp);
+}
+
+/**
+ * bnx2x_init_hw_common - initialize the HW at the COMMON phase.
+ *
+ * @bp:		driver handle
+ */
+static int bnx2x_init_hw_common(struct bnx2x *bp)
+{
+	u32 val;
+
+	DP(BNX2X_MSG_MCP, "starting common init  func %d\n", BP_ABS_FUNC(bp));
+
+	bnx2x_reset_common(bp);
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff);
+
+	val = 0xfffc;
+	if (CHIP_IS_E3(bp)) {
+		val |= MISC_REGISTERS_RESET_REG_2_MSTAT0;
+		val |= MISC_REGISTERS_RESET_REG_2_MSTAT1;
+	}
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, val);
+
+	bnx2x_init_block(bp, BLOCK_MISC, PHASE_COMMON);
+
+	if (!CHIP_IS_E1x(bp)) {
+		u8 abs_func_id;
+
+		/**
+		 * 4-port mode or 2-port mode we need to turn of master-enable
+		 * for everyone, after that, turn it back on for self.
+		 * so, we disregard multi-function or not, and always disable
+		 * for all functions on the given path, this means 0,2,4,6 for
+		 * path 0 and 1,3,5,7 for path 1
+		 */
+		for (abs_func_id = BP_PATH(bp);
+		     abs_func_id < E2_FUNC_MAX*2; abs_func_id += 2) {
+			if (abs_func_id == BP_ABS_FUNC(bp)) {
+				REG_WR(bp,
+				    PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER,
+				    1);
+				continue;
+			}
+
+			bnx2x_pretend_func(bp, abs_func_id);
+			/* clear pf enable */
+			bnx2x_pf_disable(bp);
+			bnx2x_pretend_func(bp, BP_ABS_FUNC(bp));
+		}
+	}
+
+	bnx2x_init_block(bp, BLOCK_PXP, PHASE_COMMON);
+	if (CHIP_IS_E1(bp)) {
+		/* enable HW interrupt from PXP on USDM overflow
+		   bit 16 on INT_MASK_0 */
+		REG_WR(bp, PXP_REG_PXP_INT_MASK_0, 0);
+	}
+
+	bnx2x_init_block(bp, BLOCK_PXP2, PHASE_COMMON);
+	bnx2x_init_pxp(bp);
+
+#ifdef __BIG_ENDIAN
+	REG_WR(bp, PXP2_REG_RQ_QM_ENDIAN_M, 1);
+	REG_WR(bp, PXP2_REG_RQ_TM_ENDIAN_M, 1);
+	REG_WR(bp, PXP2_REG_RQ_SRC_ENDIAN_M, 1);
+	REG_WR(bp, PXP2_REG_RQ_CDU_ENDIAN_M, 1);
+	REG_WR(bp, PXP2_REG_RQ_DBG_ENDIAN_M, 1);
+	/* make sure this value is 0 */
+	REG_WR(bp, PXP2_REG_RQ_HC_ENDIAN_M, 0);
+
+/*	REG_WR(bp, PXP2_REG_RD_PBF_SWAP_MODE, 1); */
+	REG_WR(bp, PXP2_REG_RD_QM_SWAP_MODE, 1);
+	REG_WR(bp, PXP2_REG_RD_TM_SWAP_MODE, 1);
+	REG_WR(bp, PXP2_REG_RD_SRC_SWAP_MODE, 1);
+	REG_WR(bp, PXP2_REG_RD_CDURD_SWAP_MODE, 1);
+#endif
+
+	bnx2x_ilt_init_page_size(bp, INITOP_SET);
+
+	if (CHIP_REV_IS_FPGA(bp) && CHIP_IS_E1H(bp))
+		REG_WR(bp, PXP2_REG_PGL_TAGS_LIMIT, 0x1);
+
+	/* let the HW do it's magic ... */
+	msleep(100);
+	/* finish PXP init */
+	val = REG_RD(bp, PXP2_REG_RQ_CFG_DONE);
+	if (val != 1) {
+		BNX2X_ERR("PXP2 CFG failed\n");
+		return -EBUSY;
+	}
+	val = REG_RD(bp, PXP2_REG_RD_INIT_DONE);
+	if (val != 1) {
+		BNX2X_ERR("PXP2 RD_INIT failed\n");
+		return -EBUSY;
+	}
+
+	/* Timers bug workaround E2 only. We need to set the entire ILT to
+	 * have entries with value "0" and valid bit on.
+	 * This needs to be done by the first PF that is loaded in a path
+	 * (i.e. common phase)
+	 */
+	if (!CHIP_IS_E1x(bp)) {
+/* In E2 there is a bug in the timers block that can cause function 6 / 7
+ * (i.e. vnic3) to start even if it is marked as "scan-off".
+ * This occurs when a different function (func2,3) is being marked
+ * as "scan-off". Real-life scenario for example: if a driver is being
+ * load-unloaded while func6,7 are down. This will cause the timer to access
+ * the ilt, translate to a logical address and send a request to read/write.
+ * Since the ilt for the function that is down is not valid, this will cause
+ * a translation error which is unrecoverable.
+ * The Workaround is intended to make sure that when this happens nothing fatal
+ * will occur. The workaround:
+ *	1.  First PF driver which loads on a path will:
+ *		a.  After taking the chip out of reset, by using pretend,
+ *		    it will write "0" to the following registers of
+ *		    the other vnics.
+ *		    REG_WR(pdev, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0);
+ *		    REG_WR(pdev, CFC_REG_WEAK_ENABLE_PF,0);
+ *		    REG_WR(pdev, CFC_REG_STRONG_ENABLE_PF,0);
+ *		    And for itself it will write '1' to
+ *		    PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER to enable
+ *		    dmae-operations (writing to pram for example.)
+ *		    note: can be done for only function 6,7 but cleaner this
+ *			  way.
+ *		b.  Write zero+valid to the entire ILT.
+ *		c.  Init the first_timers_ilt_entry, last_timers_ilt_entry of
+ *		    VNIC3 (of that port). The range allocated will be the
+ *		    entire ILT. This is needed to prevent  ILT range error.
+ *	2.  Any PF driver load flow:
+ *		a.  ILT update with the physical addresses of the allocated
+ *		    logical pages.
+ *		b.  Wait 20msec. - note that this timeout is needed to make
+ *		    sure there are no requests in one of the PXP internal
+ *		    queues with "old" ILT addresses.
+ *		c.  PF enable in the PGLC.
+ *		d.  Clear the was_error of the PF in the PGLC. (could have
+ *		    occured while driver was down)
+ *		e.  PF enable in the CFC (WEAK + STRONG)
+ *		f.  Timers scan enable
+ *	3.  PF driver unload flow:
+ *		a.  Clear the Timers scan_en.
+ *		b.  Polling for scan_on=0 for that PF.
+ *		c.  Clear the PF enable bit in the PXP.
+ *		d.  Clear the PF enable in the CFC (WEAK + STRONG)
+ *		e.  Write zero+valid to all ILT entries (The valid bit must
+ *		    stay set)
+ *		f.  If this is VNIC 3 of a port then also init
+ *		    first_timers_ilt_entry to zero and last_timers_ilt_entry
+ *		    to the last enrty in the ILT.
+ *
+ *	Notes:
+ *	Currently the PF error in the PGLC is non recoverable.
+ *	In the future the there will be a recovery routine for this error.
+ *	Currently attention is masked.
+ *	Having an MCP lock on the load/unload process does not guarantee that
+ *	there is no Timer disable during Func6/7 enable. This is because the
+ *	Timers scan is currently being cleared by the MCP on FLR.
+ *	Step 2.d can be done only for PF6/7 and the driver can also check if
+ *	there is error before clearing it. But the flow above is simpler and
+ *	more general.
+ *	All ILT entries are written by zero+valid and not just PF6/7
+ *	ILT entries since in the future the ILT entries allocation for
+ *	PF-s might be dynamic.
+ */
+		struct ilt_client_info ilt_cli;
+		struct bnx2x_ilt ilt;
+		memset(&ilt_cli, 0, sizeof(struct ilt_client_info));
+		memset(&ilt, 0, sizeof(struct bnx2x_ilt));
+
+		/* initialize dummy TM client */
+		ilt_cli.start = 0;
+		ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1;
+		ilt_cli.client_num = ILT_CLIENT_TM;
+
+		/* Step 1: set zeroes to all ilt page entries with valid bit on
+		 * Step 2: set the timers first/last ilt entry to point
+		 * to the entire range to prevent ILT range error for 3rd/4th
+		 * vnic	(this code assumes existance of the vnic)
+		 *
+		 * both steps performed by call to bnx2x_ilt_client_init_op()
+		 * with dummy TM client
+		 *
+		 * we must use pretend since PXP2_REG_RQ_##blk##_FIRST_ILT
+		 * and his brother are split registers
+		 */
+		bnx2x_pretend_func(bp, (BP_PATH(bp) + 6));
+		bnx2x_ilt_client_init_op_ilt(bp, &ilt, &ilt_cli, INITOP_CLEAR);
+		bnx2x_pretend_func(bp, BP_ABS_FUNC(bp));
+
+		REG_WR(bp, PXP2_REG_RQ_DRAM_ALIGN, BNX2X_PXP_DRAM_ALIGN);
+		REG_WR(bp, PXP2_REG_RQ_DRAM_ALIGN_RD, BNX2X_PXP_DRAM_ALIGN);
+		REG_WR(bp, PXP2_REG_RQ_DRAM_ALIGN_SEL, 1);
+	}
+
+
+	REG_WR(bp, PXP2_REG_RQ_DISABLE_INPUTS, 0);
+	REG_WR(bp, PXP2_REG_RD_DISABLE_INPUTS, 0);
+
+	if (!CHIP_IS_E1x(bp)) {
+		int factor = CHIP_REV_IS_EMUL(bp) ? 1000 :
+				(CHIP_REV_IS_FPGA(bp) ? 400 : 0);
+		bnx2x_init_block(bp, BLOCK_PGLUE_B, PHASE_COMMON);
+
+		bnx2x_init_block(bp, BLOCK_ATC, PHASE_COMMON);
+
+		/* let the HW do it's magic ... */
+		do {
+			msleep(200);
+			val = REG_RD(bp, ATC_REG_ATC_INIT_DONE);
+		} while (factor-- && (val != 1));
+
+		if (val != 1) {
+			BNX2X_ERR("ATC_INIT failed\n");
+			return -EBUSY;
+		}
+	}
+
+	bnx2x_init_block(bp, BLOCK_DMAE, PHASE_COMMON);
+
+	/* clean the DMAE memory */
+	bp->dmae_ready = 1;
+	bnx2x_init_fill(bp, TSEM_REG_PRAM, 0, 8, 1);
+
+	bnx2x_init_block(bp, BLOCK_TCM, PHASE_COMMON);
+
+	bnx2x_init_block(bp, BLOCK_UCM, PHASE_COMMON);
+
+	bnx2x_init_block(bp, BLOCK_CCM, PHASE_COMMON);
+
+	bnx2x_init_block(bp, BLOCK_XCM, PHASE_COMMON);
+
+	bnx2x_read_dmae(bp, XSEM_REG_PASSIVE_BUFFER, 3);
+	bnx2x_read_dmae(bp, CSEM_REG_PASSIVE_BUFFER, 3);
+	bnx2x_read_dmae(bp, TSEM_REG_PASSIVE_BUFFER, 3);
+	bnx2x_read_dmae(bp, USEM_REG_PASSIVE_BUFFER, 3);
+
+	bnx2x_init_block(bp, BLOCK_QM, PHASE_COMMON);
+
+
+	/* QM queues pointers table */
+	bnx2x_qm_init_ptr_table(bp, bp->qm_cid_count, INITOP_SET);
+
+	/* soft reset pulse */
+	REG_WR(bp, QM_REG_SOFT_RESET, 1);
+	REG_WR(bp, QM_REG_SOFT_RESET, 0);
+
+#ifdef BCM_CNIC
+	bnx2x_init_block(bp, BLOCK_TM, PHASE_COMMON);
+#endif
+
+	bnx2x_init_block(bp, BLOCK_DORQ, PHASE_COMMON);
+	REG_WR(bp, DORQ_REG_DPM_CID_OFST, BNX2X_DB_SHIFT);
+	if (!CHIP_REV_IS_SLOW(bp))
+		/* enable hw interrupt from doorbell Q */
+		REG_WR(bp, DORQ_REG_DORQ_INT_MASK, 0);
+
+	bnx2x_init_block(bp, BLOCK_BRB1, PHASE_COMMON);
+
+	bnx2x_init_block(bp, BLOCK_PRS, PHASE_COMMON);
+	REG_WR(bp, PRS_REG_A_PRSU_20, 0xf);
+
+	if (!CHIP_IS_E1(bp))
+		REG_WR(bp, PRS_REG_E1HOV_MODE, bp->path_has_ovlan);
+
+	if (!CHIP_IS_E1x(bp) && !CHIP_IS_E3B0(bp))
+		/* Bit-map indicating which L2 hdrs may appear
+		 * after the basic Ethernet header
+		 */
+		REG_WR(bp, PRS_REG_HDRS_AFTER_BASIC,
+		       bp->path_has_ovlan ? 7 : 6);
+
+	bnx2x_init_block(bp, BLOCK_TSDM, PHASE_COMMON);
+	bnx2x_init_block(bp, BLOCK_CSDM, PHASE_COMMON);
+	bnx2x_init_block(bp, BLOCK_USDM, PHASE_COMMON);
+	bnx2x_init_block(bp, BLOCK_XSDM, PHASE_COMMON);
+
+	if (!CHIP_IS_E1x(bp)) {
+		/* reset VFC memories */
+		REG_WR(bp, TSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST,
+			   VFC_MEMORIES_RST_REG_CAM_RST |
+			   VFC_MEMORIES_RST_REG_RAM_RST);
+		REG_WR(bp, XSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST,
+			   VFC_MEMORIES_RST_REG_CAM_RST |
+			   VFC_MEMORIES_RST_REG_RAM_RST);
+
+		msleep(20);
+	}
+
+	bnx2x_init_block(bp, BLOCK_TSEM, PHASE_COMMON);
+	bnx2x_init_block(bp, BLOCK_USEM, PHASE_COMMON);
+	bnx2x_init_block(bp, BLOCK_CSEM, PHASE_COMMON);
+	bnx2x_init_block(bp, BLOCK_XSEM, PHASE_COMMON);
+
+	/* sync semi rtc */
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
+	       0x80000000);
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
+	       0x80000000);
+
+	bnx2x_init_block(bp, BLOCK_UPB, PHASE_COMMON);
+	bnx2x_init_block(bp, BLOCK_XPB, PHASE_COMMON);
+	bnx2x_init_block(bp, BLOCK_PBF, PHASE_COMMON);
+
+	if (!CHIP_IS_E1x(bp))
+		REG_WR(bp, PBF_REG_HDRS_AFTER_BASIC,
+		       bp->path_has_ovlan ? 7 : 6);
+
+	REG_WR(bp, SRC_REG_SOFT_RST, 1);
+
+	bnx2x_init_block(bp, BLOCK_SRC, PHASE_COMMON);
+
+#ifdef BCM_CNIC
+	REG_WR(bp, SRC_REG_KEYSEARCH_0, 0x63285672);
+	REG_WR(bp, SRC_REG_KEYSEARCH_1, 0x24b8f2cc);
+	REG_WR(bp, SRC_REG_KEYSEARCH_2, 0x223aef9b);
+	REG_WR(bp, SRC_REG_KEYSEARCH_3, 0x26001e3a);
+	REG_WR(bp, SRC_REG_KEYSEARCH_4, 0x7ae91116);
+	REG_WR(bp, SRC_REG_KEYSEARCH_5, 0x5ce5230b);
+	REG_WR(bp, SRC_REG_KEYSEARCH_6, 0x298d8adf);
+	REG_WR(bp, SRC_REG_KEYSEARCH_7, 0x6eb0ff09);
+	REG_WR(bp, SRC_REG_KEYSEARCH_8, 0x1830f82f);
+	REG_WR(bp, SRC_REG_KEYSEARCH_9, 0x01e46be7);
+#endif
+	REG_WR(bp, SRC_REG_SOFT_RST, 0);
+
+	if (sizeof(union cdu_context) != 1024)
+		/* we currently assume that a context is 1024 bytes */
+		dev_alert(&bp->pdev->dev, "please adjust the size "
+					  "of cdu_context(%ld)\n",
+			 (long)sizeof(union cdu_context));
+
+	bnx2x_init_block(bp, BLOCK_CDU, PHASE_COMMON);
+	val = (4 << 24) + (0 << 12) + 1024;
+	REG_WR(bp, CDU_REG_CDU_GLOBAL_PARAMS, val);
+
+	bnx2x_init_block(bp, BLOCK_CFC, PHASE_COMMON);
+	REG_WR(bp, CFC_REG_INIT_REG, 0x7FF);
+	/* enable context validation interrupt from CFC */
+	REG_WR(bp, CFC_REG_CFC_INT_MASK, 0);
+
+	/* set the thresholds to prevent CFC/CDU race */
+	REG_WR(bp, CFC_REG_DEBUG0, 0x20020000);
+
+	bnx2x_init_block(bp, BLOCK_HC, PHASE_COMMON);
+
+	if (!CHIP_IS_E1x(bp) && BP_NOMCP(bp))
+		REG_WR(bp, IGU_REG_RESET_MEMORIES, 0x36);
+
+	bnx2x_init_block(bp, BLOCK_IGU, PHASE_COMMON);
+	bnx2x_init_block(bp, BLOCK_MISC_AEU, PHASE_COMMON);
+
+	/* Reset PCIE errors for debug */
+	REG_WR(bp, 0x2814, 0xffffffff);
+	REG_WR(bp, 0x3820, 0xffffffff);
+
+	if (!CHIP_IS_E1x(bp)) {
+		REG_WR(bp, PCICFG_OFFSET + PXPCS_TL_CONTROL_5,
+			   (PXPCS_TL_CONTROL_5_ERR_UNSPPORT1 |
+				PXPCS_TL_CONTROL_5_ERR_UNSPPORT));
+		REG_WR(bp, PCICFG_OFFSET + PXPCS_TL_FUNC345_STAT,
+			   (PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT4 |
+				PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT3 |
+				PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT2));
+		REG_WR(bp, PCICFG_OFFSET + PXPCS_TL_FUNC678_STAT,
+			   (PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT7 |
+				PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT6 |
+				PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT5));
+	}
+
+	bnx2x_init_block(bp, BLOCK_NIG, PHASE_COMMON);
+	if (!CHIP_IS_E1(bp)) {
+		/* in E3 this done in per-port section */
+		if (!CHIP_IS_E3(bp))
+			REG_WR(bp, NIG_REG_LLH_MF_MODE, IS_MF(bp));
+	}
+	if (CHIP_IS_E1H(bp))
+		/* not applicable for E2 (and above ...) */
+		REG_WR(bp, NIG_REG_LLH_E1HOV_MODE, IS_MF_SD(bp));
+
+	if (CHIP_REV_IS_SLOW(bp))
+		msleep(200);
+
+	/* finish CFC init */
+	val = reg_poll(bp, CFC_REG_LL_INIT_DONE, 1, 100, 10);
+	if (val != 1) {
+		BNX2X_ERR("CFC LL_INIT failed\n");
+		return -EBUSY;
+	}
+	val = reg_poll(bp, CFC_REG_AC_INIT_DONE, 1, 100, 10);
+	if (val != 1) {
+		BNX2X_ERR("CFC AC_INIT failed\n");
+		return -EBUSY;
+	}
+	val = reg_poll(bp, CFC_REG_CAM_INIT_DONE, 1, 100, 10);
+	if (val != 1) {
+		BNX2X_ERR("CFC CAM_INIT failed\n");
+		return -EBUSY;
+	}
+	REG_WR(bp, CFC_REG_DEBUG0, 0);
+
+	if (CHIP_IS_E1(bp)) {
+		/* read NIG statistic
+		   to see if this is our first up since powerup */
+		bnx2x_read_dmae(bp, NIG_REG_STAT2_BRB_OCTET, 2);
+		val = *bnx2x_sp(bp, wb_data[0]);
+
+		/* do internal memory self test */
+		if ((val == 0) && bnx2x_int_mem_test(bp)) {
+			BNX2X_ERR("internal mem self test failed\n");
+			return -EBUSY;
+		}
+	}
+
+	bnx2x_setup_fan_failure_detection(bp);
+
+	/* clear PXP2 attentions */
+	REG_RD(bp, PXP2_REG_PXP2_INT_STS_CLR_0);
+
+	bnx2x_enable_blocks_attention(bp);
+	bnx2x_enable_blocks_parity(bp);
+
+	if (!BP_NOMCP(bp)) {
+		if (CHIP_IS_E1x(bp))
+			bnx2x__common_init_phy(bp);
+	} else
+		BNX2X_ERR("Bootcode is missing - can not initialize link\n");
+
+	return 0;
+}
+
+/**
+ * bnx2x_init_hw_common_chip - init HW at the COMMON_CHIP phase.
+ *
+ * @bp:		driver handle
+ */
+static int bnx2x_init_hw_common_chip(struct bnx2x *bp)
+{
+	int rc = bnx2x_init_hw_common(bp);
+
+	if (rc)
+		return rc;
+
+	/* In E2 2-PORT mode, same ext phy is used for the two paths */
+	if (!BP_NOMCP(bp))
+		bnx2x__common_init_phy(bp);
+
+	return 0;
+}
+
+static int bnx2x_init_hw_port(struct bnx2x *bp)
+{
+	int port = BP_PORT(bp);
+	int init_phase = port ? PHASE_PORT1 : PHASE_PORT0;
+	u32 low, high;
+	u32 val;
+
+	bnx2x__link_reset(bp);
+
+	DP(BNX2X_MSG_MCP, "starting port init  port %d\n", port);
+
+	REG_WR(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, 0);
+
+	bnx2x_init_block(bp, BLOCK_MISC, init_phase);
+	bnx2x_init_block(bp, BLOCK_PXP, init_phase);
+	bnx2x_init_block(bp, BLOCK_PXP2, init_phase);
+
+	/* Timers bug workaround: disables the pf_master bit in pglue at
+	 * common phase, we need to enable it here before any dmae access are
+	 * attempted. Therefore we manually added the enable-master to the
+	 * port phase (it also happens in the function phase)
+	 */
+	if (!CHIP_IS_E1x(bp))
+		REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
+
+	bnx2x_init_block(bp, BLOCK_ATC, init_phase);
+	bnx2x_init_block(bp, BLOCK_DMAE, init_phase);
+	bnx2x_init_block(bp, BLOCK_PGLUE_B, init_phase);
+	bnx2x_init_block(bp, BLOCK_QM, init_phase);
+
+	bnx2x_init_block(bp, BLOCK_TCM, init_phase);
+	bnx2x_init_block(bp, BLOCK_UCM, init_phase);
+	bnx2x_init_block(bp, BLOCK_CCM, init_phase);
+	bnx2x_init_block(bp, BLOCK_XCM, init_phase);
+
+	/* QM cid (connection) count */
+	bnx2x_qm_init_cid_count(bp, bp->qm_cid_count, INITOP_SET);
+
+#ifdef BCM_CNIC
+	bnx2x_init_block(bp, BLOCK_TM, init_phase);
+	REG_WR(bp, TM_REG_LIN0_SCAN_TIME + port*4, 20);
+	REG_WR(bp, TM_REG_LIN0_MAX_ACTIVE_CID + port*4, 31);
+#endif
+
+	bnx2x_init_block(bp, BLOCK_DORQ, init_phase);
+
+	if (CHIP_IS_E1(bp) || CHIP_IS_E1H(bp)) {
+		bnx2x_init_block(bp, BLOCK_BRB1, init_phase);
+
+		if (IS_MF(bp))
+			low = ((bp->flags & ONE_PORT_FLAG) ? 160 : 246);
+		else if (bp->dev->mtu > 4096) {
+			if (bp->flags & ONE_PORT_FLAG)
+				low = 160;
+			else {
+				val = bp->dev->mtu;
+				/* (24*1024 + val*4)/256 */
+				low = 96 + (val/64) +
+						((val % 64) ? 1 : 0);
+			}
+		} else
+			low = ((bp->flags & ONE_PORT_FLAG) ? 80 : 160);
+		high = low + 56;	/* 14*1024/256 */
+		REG_WR(bp, BRB1_REG_PAUSE_LOW_THRESHOLD_0 + port*4, low);
+		REG_WR(bp, BRB1_REG_PAUSE_HIGH_THRESHOLD_0 + port*4, high);
+	}
+
+	if (CHIP_MODE_IS_4_PORT(bp))
+		REG_WR(bp, (BP_PORT(bp) ?
+			    BRB1_REG_MAC_GUARANTIED_1 :
+			    BRB1_REG_MAC_GUARANTIED_0), 40);
+
+
+	bnx2x_init_block(bp, BLOCK_PRS, init_phase);
+	if (CHIP_IS_E3B0(bp))
+		/* Ovlan exists only if we are in multi-function +
+		 * switch-dependent mode, in switch-independent there
+		 * is no ovlan headers
+		 */
+		REG_WR(bp, BP_PORT(bp) ?
+		       PRS_REG_HDRS_AFTER_BASIC_PORT_1 :
+		       PRS_REG_HDRS_AFTER_BASIC_PORT_0,
+		       (bp->path_has_ovlan ? 7 : 6));
+
+	bnx2x_init_block(bp, BLOCK_TSDM, init_phase);
+	bnx2x_init_block(bp, BLOCK_CSDM, init_phase);
+	bnx2x_init_block(bp, BLOCK_USDM, init_phase);
+	bnx2x_init_block(bp, BLOCK_XSDM, init_phase);
+
+	bnx2x_init_block(bp, BLOCK_TSEM, init_phase);
+	bnx2x_init_block(bp, BLOCK_USEM, init_phase);
+	bnx2x_init_block(bp, BLOCK_CSEM, init_phase);
+	bnx2x_init_block(bp, BLOCK_XSEM, init_phase);
+
+	bnx2x_init_block(bp, BLOCK_UPB, init_phase);
+	bnx2x_init_block(bp, BLOCK_XPB, init_phase);
+
+	bnx2x_init_block(bp, BLOCK_PBF, init_phase);
+
+	if (CHIP_IS_E1x(bp)) {
+		/* configure PBF to work without PAUSE mtu 9000 */
+		REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 0);
+
+		/* update threshold */
+		REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, (9040/16));
+		/* update init credit */
+		REG_WR(bp, PBF_REG_P0_INIT_CRD + port*4, (9040/16) + 553 - 22);
+
+		/* probe changes */
+		REG_WR(bp, PBF_REG_INIT_P0 + port*4, 1);
+		udelay(50);
+		REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0);
+	}
+
+#ifdef BCM_CNIC
+	bnx2x_init_block(bp, BLOCK_SRC, init_phase);
+#endif
+	bnx2x_init_block(bp, BLOCK_CDU, init_phase);
+	bnx2x_init_block(bp, BLOCK_CFC, init_phase);
+
+	if (CHIP_IS_E1(bp)) {
+		REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0);
+		REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0);
+	}
+	bnx2x_init_block(bp, BLOCK_HC, init_phase);
+
+	bnx2x_init_block(bp, BLOCK_IGU, init_phase);
+
+	bnx2x_init_block(bp, BLOCK_MISC_AEU, init_phase);
+	/* init aeu_mask_attn_func_0/1:
+	 *  - SF mode: bits 3-7 are masked. only bits 0-2 are in use
+	 *  - MF mode: bit 3 is masked. bits 0-2 are in use as in SF
+	 *             bits 4-7 are used for "per vn group attention" */
+	val = IS_MF(bp) ? 0xF7 : 0x7;
+	/* Enable DCBX attention for all but E1 */
+	val |= CHIP_IS_E1(bp) ? 0 : 0x10;
+	REG_WR(bp, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port*4, val);
+
+	bnx2x_init_block(bp, BLOCK_NIG, init_phase);
+
+	if (!CHIP_IS_E1x(bp)) {
+		/* Bit-map indicating which L2 hdrs may appear after the
+		 * basic Ethernet header
+		 */
+		REG_WR(bp, BP_PORT(bp) ?
+			   NIG_REG_P1_HDRS_AFTER_BASIC :
+			   NIG_REG_P0_HDRS_AFTER_BASIC,
+			   IS_MF_SD(bp) ? 7 : 6);
+
+		if (CHIP_IS_E3(bp))
+			REG_WR(bp, BP_PORT(bp) ?
+				   NIG_REG_LLH1_MF_MODE :
+				   NIG_REG_LLH_MF_MODE, IS_MF(bp));
+	}
+	if (!CHIP_IS_E3(bp))
+		REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 1);
+
+	if (!CHIP_IS_E1(bp)) {
+		/* 0x2 disable mf_ov, 0x1 enable */
+		REG_WR(bp, NIG_REG_LLH0_BRB1_DRV_MASK_MF + port*4,
+		       (IS_MF_SD(bp) ? 0x1 : 0x2));
+
+		if (!CHIP_IS_E1x(bp)) {
+			val = 0;
+			switch (bp->mf_mode) {
+			case MULTI_FUNCTION_SD:
+				val = 1;
+				break;
+			case MULTI_FUNCTION_SI:
+				val = 2;
+				break;
+			}
+
+			REG_WR(bp, (BP_PORT(bp) ? NIG_REG_LLH1_CLS_TYPE :
+						  NIG_REG_LLH0_CLS_TYPE), val);
+		}
+		{
+			REG_WR(bp, NIG_REG_LLFC_ENABLE_0 + port*4, 0);
+			REG_WR(bp, NIG_REG_LLFC_OUT_EN_0 + port*4, 0);
+			REG_WR(bp, NIG_REG_PAUSE_ENABLE_0 + port*4, 1);
+		}
+	}
+
+
+	/* If SPIO5 is set to generate interrupts, enable it for this port */
+	val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN);
+	if (val & (1 << MISC_REGISTERS_SPIO_5)) {
+		u32 reg_addr = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
+				       MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
+		val = REG_RD(bp, reg_addr);
+		val |= AEU_INPUTS_ATTN_BITS_SPIO5;
+		REG_WR(bp, reg_addr, val);
+	}
+
+	return 0;
+}
+
+static void bnx2x_ilt_wr(struct bnx2x *bp, u32 index, dma_addr_t addr)
+{
+	int reg;
+
+	if (CHIP_IS_E1(bp))
+		reg = PXP2_REG_RQ_ONCHIP_AT + index*8;
+	else
+		reg = PXP2_REG_RQ_ONCHIP_AT_B0 + index*8;
+
+	bnx2x_wb_wr(bp, reg, ONCHIP_ADDR1(addr), ONCHIP_ADDR2(addr));
+}
+
+static inline void bnx2x_igu_clear_sb(struct bnx2x *bp, u8 idu_sb_id)
+{
+	bnx2x_igu_clear_sb_gen(bp, BP_FUNC(bp), idu_sb_id, true /*PF*/);
+}
+
+static inline void bnx2x_clear_func_ilt(struct bnx2x *bp, u32 func)
+{
+	u32 i, base = FUNC_ILT_BASE(func);
+	for (i = base; i < base + ILT_PER_FUNC; i++)
+		bnx2x_ilt_wr(bp, i, 0);
+}
+
+static int bnx2x_init_hw_func(struct bnx2x *bp)
+{
+	int port = BP_PORT(bp);
+	int func = BP_FUNC(bp);
+	int init_phase = PHASE_PF0 + func;
+	struct bnx2x_ilt *ilt = BP_ILT(bp);
+	u16 cdu_ilt_start;
+	u32 addr, val;
+	u32 main_mem_base, main_mem_size, main_mem_prty_clr;
+	int i, main_mem_width;
+
+	DP(BNX2X_MSG_MCP, "starting func init  func %d\n", func);
+
+	/* FLR cleanup - hmmm */
+	if (!CHIP_IS_E1x(bp))
+		bnx2x_pf_flr_clnup(bp);
+
+	/* set MSI reconfigure capability */
+	if (bp->common.int_block == INT_BLOCK_HC) {
+		addr = (port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0);
+		val = REG_RD(bp, addr);
+		val |= HC_CONFIG_0_REG_MSI_ATTN_EN_0;
+		REG_WR(bp, addr, val);
+	}
+
+	bnx2x_init_block(bp, BLOCK_PXP, init_phase);
+	bnx2x_init_block(bp, BLOCK_PXP2, init_phase);
+
+	ilt = BP_ILT(bp);
+	cdu_ilt_start = ilt->clients[ILT_CLIENT_CDU].start;
+
+	for (i = 0; i < L2_ILT_LINES(bp); i++) {
+		ilt->lines[cdu_ilt_start + i].page =
+			bp->context.vcxt + (ILT_PAGE_CIDS * i);
+		ilt->lines[cdu_ilt_start + i].page_mapping =
+			bp->context.cxt_mapping + (CDU_ILT_PAGE_SZ * i);
+		/* cdu ilt pages are allocated manually so there's no need to
+		set the size */
+	}
+	bnx2x_ilt_init_op(bp, INITOP_SET);
+
+#ifdef BCM_CNIC
+	bnx2x_src_init_t2(bp, bp->t2, bp->t2_mapping, SRC_CONN_NUM);
+
+	/* T1 hash bits value determines the T1 number of entries */
+	REG_WR(bp, SRC_REG_NUMBER_HASH_BITS0 + port*4, SRC_HASH_BITS);
+#endif
+
+#ifndef BCM_CNIC
+	/* set NIC mode */
+	REG_WR(bp, PRS_REG_NIC_MODE, 1);
+#endif  /* BCM_CNIC */
+
+	if (!CHIP_IS_E1x(bp)) {
+		u32 pf_conf = IGU_PF_CONF_FUNC_EN;
+
+		/* Turn on a single ISR mode in IGU if driver is going to use
+		 * INT#x or MSI
+		 */
+		if (!(bp->flags & USING_MSIX_FLAG))
+			pf_conf |= IGU_PF_CONF_SINGLE_ISR_EN;
+		/*
+		 * Timers workaround bug: function init part.
+		 * Need to wait 20msec after initializing ILT,
+		 * needed to make sure there are no requests in
+		 * one of the PXP internal queues with "old" ILT addresses
+		 */
+		msleep(20);
+		/*
+		 * Master enable - Due to WB DMAE writes performed before this
+		 * register is re-initialized as part of the regular function
+		 * init
+		 */
+		REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
+		/* Enable the function in IGU */
+		REG_WR(bp, IGU_REG_PF_CONFIGURATION, pf_conf);
+	}
+
+	bp->dmae_ready = 1;
+
+	bnx2x_init_block(bp, BLOCK_PGLUE_B, init_phase);
+
+	if (!CHIP_IS_E1x(bp))
+		REG_WR(bp, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR, func);
+
+	bnx2x_init_block(bp, BLOCK_ATC, init_phase);
+	bnx2x_init_block(bp, BLOCK_DMAE, init_phase);
+	bnx2x_init_block(bp, BLOCK_NIG, init_phase);
+	bnx2x_init_block(bp, BLOCK_SRC, init_phase);
+	bnx2x_init_block(bp, BLOCK_MISC, init_phase);
+	bnx2x_init_block(bp, BLOCK_TCM, init_phase);
+	bnx2x_init_block(bp, BLOCK_UCM, init_phase);
+	bnx2x_init_block(bp, BLOCK_CCM, init_phase);
+	bnx2x_init_block(bp, BLOCK_XCM, init_phase);
+	bnx2x_init_block(bp, BLOCK_TSEM, init_phase);
+	bnx2x_init_block(bp, BLOCK_USEM, init_phase);
+	bnx2x_init_block(bp, BLOCK_CSEM, init_phase);
+	bnx2x_init_block(bp, BLOCK_XSEM, init_phase);
+
+	if (!CHIP_IS_E1x(bp))
+		REG_WR(bp, QM_REG_PF_EN, 1);
+
+	if (!CHIP_IS_E1x(bp)) {
+		REG_WR(bp, TSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
+		REG_WR(bp, USEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
+		REG_WR(bp, CSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
+		REG_WR(bp, XSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
+	}
+	bnx2x_init_block(bp, BLOCK_QM, init_phase);
+
+	bnx2x_init_block(bp, BLOCK_TM, init_phase);
+	bnx2x_init_block(bp, BLOCK_DORQ, init_phase);
+	bnx2x_init_block(bp, BLOCK_BRB1, init_phase);
+	bnx2x_init_block(bp, BLOCK_PRS, init_phase);
+	bnx2x_init_block(bp, BLOCK_TSDM, init_phase);
+	bnx2x_init_block(bp, BLOCK_CSDM, init_phase);
+	bnx2x_init_block(bp, BLOCK_USDM, init_phase);
+	bnx2x_init_block(bp, BLOCK_XSDM, init_phase);
+	bnx2x_init_block(bp, BLOCK_UPB, init_phase);
+	bnx2x_init_block(bp, BLOCK_XPB, init_phase);
+	bnx2x_init_block(bp, BLOCK_PBF, init_phase);
+	if (!CHIP_IS_E1x(bp))
+		REG_WR(bp, PBF_REG_DISABLE_PF, 0);
+
+	bnx2x_init_block(bp, BLOCK_CDU, init_phase);
+
+	bnx2x_init_block(bp, BLOCK_CFC, init_phase);
+
+	if (!CHIP_IS_E1x(bp))
+		REG_WR(bp, CFC_REG_WEAK_ENABLE_PF, 1);
+
+	if (IS_MF(bp)) {
+		REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 1);
+		REG_WR(bp, NIG_REG_LLH0_FUNC_VLAN_ID + port*8, bp->mf_ov);
+	}
+
+	bnx2x_init_block(bp, BLOCK_MISC_AEU, init_phase);
+
+	/* HC init per function */
+	if (bp->common.int_block == INT_BLOCK_HC) {
+		if (CHIP_IS_E1H(bp)) {
+			REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0);
+
+			REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0);
+			REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0);
+		}
+		bnx2x_init_block(bp, BLOCK_HC, init_phase);
+
+	} else {
+		int num_segs, sb_idx, prod_offset;
+
+		REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0);
+
+		if (!CHIP_IS_E1x(bp)) {
+			REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, 0);
+			REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, 0);
+		}
+
+		bnx2x_init_block(bp, BLOCK_IGU, init_phase);
+
+		if (!CHIP_IS_E1x(bp)) {
+			int dsb_idx = 0;
+			/**
+			 * Producer memory:
+			 * E2 mode: address 0-135 match to the mapping memory;
+			 * 136 - PF0 default prod; 137 - PF1 default prod;
+			 * 138 - PF2 default prod; 139 - PF3 default prod;
+			 * 140 - PF0 attn prod;    141 - PF1 attn prod;
+			 * 142 - PF2 attn prod;    143 - PF3 attn prod;
+			 * 144-147 reserved.
+			 *
+			 * E1.5 mode - In backward compatible mode;
+			 * for non default SB; each even line in the memory
+			 * holds the U producer and each odd line hold
+			 * the C producer. The first 128 producers are for
+			 * NDSB (PF0 - 0-31; PF1 - 32-63 and so on). The last 20
+			 * producers are for the DSB for each PF.
+			 * Each PF has five segments: (the order inside each
+			 * segment is PF0; PF1; PF2; PF3) - 128-131 U prods;
+			 * 132-135 C prods; 136-139 X prods; 140-143 T prods;
+			 * 144-147 attn prods;
+			 */
+			/* non-default-status-blocks */
+			num_segs = CHIP_INT_MODE_IS_BC(bp) ?
+				IGU_BC_NDSB_NUM_SEGS : IGU_NORM_NDSB_NUM_SEGS;
+			for (sb_idx = 0; sb_idx < bp->igu_sb_cnt; sb_idx++) {
+				prod_offset = (bp->igu_base_sb + sb_idx) *
+					num_segs;
+
+				for (i = 0; i < num_segs; i++) {
+					addr = IGU_REG_PROD_CONS_MEMORY +
+							(prod_offset + i) * 4;
+					REG_WR(bp, addr, 0);
+				}
+				/* send consumer update with value 0 */
+				bnx2x_ack_sb(bp, bp->igu_base_sb + sb_idx,
+					     USTORM_ID, 0, IGU_INT_NOP, 1);
+				bnx2x_igu_clear_sb(bp,
+						   bp->igu_base_sb + sb_idx);
+			}
+
+			/* default-status-blocks */
+			num_segs = CHIP_INT_MODE_IS_BC(bp) ?
+				IGU_BC_DSB_NUM_SEGS : IGU_NORM_DSB_NUM_SEGS;
+
+			if (CHIP_MODE_IS_4_PORT(bp))
+				dsb_idx = BP_FUNC(bp);
+			else
+				dsb_idx = BP_E1HVN(bp);
+
+			prod_offset = (CHIP_INT_MODE_IS_BC(bp) ?
+				       IGU_BC_BASE_DSB_PROD + dsb_idx :
+				       IGU_NORM_BASE_DSB_PROD + dsb_idx);
+
+			for (i = 0; i < (num_segs * E1HVN_MAX);
+			     i += E1HVN_MAX) {
+				addr = IGU_REG_PROD_CONS_MEMORY +
+							(prod_offset + i)*4;
+				REG_WR(bp, addr, 0);
+			}
+			/* send consumer update with 0 */
+			if (CHIP_INT_MODE_IS_BC(bp)) {
+				bnx2x_ack_sb(bp, bp->igu_dsb_id,
+					     USTORM_ID, 0, IGU_INT_NOP, 1);
+				bnx2x_ack_sb(bp, bp->igu_dsb_id,
+					     CSTORM_ID, 0, IGU_INT_NOP, 1);
+				bnx2x_ack_sb(bp, bp->igu_dsb_id,
+					     XSTORM_ID, 0, IGU_INT_NOP, 1);
+				bnx2x_ack_sb(bp, bp->igu_dsb_id,
+					     TSTORM_ID, 0, IGU_INT_NOP, 1);
+				bnx2x_ack_sb(bp, bp->igu_dsb_id,
+					     ATTENTION_ID, 0, IGU_INT_NOP, 1);
+			} else {
+				bnx2x_ack_sb(bp, bp->igu_dsb_id,
+					     USTORM_ID, 0, IGU_INT_NOP, 1);
+				bnx2x_ack_sb(bp, bp->igu_dsb_id,
+					     ATTENTION_ID, 0, IGU_INT_NOP, 1);
+			}
+			bnx2x_igu_clear_sb(bp, bp->igu_dsb_id);
+
+			/* !!! these should become driver const once
+			   rf-tool supports split-68 const */
+			REG_WR(bp, IGU_REG_SB_INT_BEFORE_MASK_LSB, 0);
+			REG_WR(bp, IGU_REG_SB_INT_BEFORE_MASK_MSB, 0);
+			REG_WR(bp, IGU_REG_SB_MASK_LSB, 0);
+			REG_WR(bp, IGU_REG_SB_MASK_MSB, 0);
+			REG_WR(bp, IGU_REG_PBA_STATUS_LSB, 0);
+			REG_WR(bp, IGU_REG_PBA_STATUS_MSB, 0);
+		}
+	}
+
+	/* Reset PCIE errors for debug */
+	REG_WR(bp, 0x2114, 0xffffffff);
+	REG_WR(bp, 0x2120, 0xffffffff);
+
+	if (CHIP_IS_E1x(bp)) {
+		main_mem_size = HC_REG_MAIN_MEMORY_SIZE / 2; /*dwords*/
+		main_mem_base = HC_REG_MAIN_MEMORY +
+				BP_PORT(bp) * (main_mem_size * 4);
+		main_mem_prty_clr = HC_REG_HC_PRTY_STS_CLR;
+		main_mem_width = 8;
+
+		val = REG_RD(bp, main_mem_prty_clr);
+		if (val)
+			DP(BNX2X_MSG_MCP, "Hmmm... Parity errors in HC "
+					  "block during "
+					  "function init (0x%x)!\n", val);
+
+		/* Clear "false" parity errors in MSI-X table */
+		for (i = main_mem_base;
+		     i < main_mem_base + main_mem_size * 4;
+		     i += main_mem_width) {
+			bnx2x_read_dmae(bp, i, main_mem_width / 4);
+			bnx2x_write_dmae(bp, bnx2x_sp_mapping(bp, wb_data),
+					 i, main_mem_width / 4);
+		}
+		/* Clear HC parity attention */
+		REG_RD(bp, main_mem_prty_clr);
+	}
+
+#ifdef BNX2X_STOP_ON_ERROR
+	/* Enable STORMs SP logging */
+	REG_WR8(bp, BAR_USTRORM_INTMEM +
+	       USTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1);
+	REG_WR8(bp, BAR_TSTRORM_INTMEM +
+	       TSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1);
+	REG_WR8(bp, BAR_CSTRORM_INTMEM +
+	       CSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1);
+	REG_WR8(bp, BAR_XSTRORM_INTMEM +
+	       XSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1);
+#endif
+
+	bnx2x_phy_probe(&bp->link_params);
+
+	return 0;
+}
+
+
+void bnx2x_free_mem(struct bnx2x *bp)
+{
+	/* fastpath */
+	bnx2x_free_fp_mem(bp);
+	/* end of fastpath */
+
+	BNX2X_PCI_FREE(bp->def_status_blk, bp->def_status_blk_mapping,
+		       sizeof(struct host_sp_status_block));
+
+	BNX2X_PCI_FREE(bp->fw_stats, bp->fw_stats_mapping,
+		       bp->fw_stats_data_sz + bp->fw_stats_req_sz);
+
+	BNX2X_PCI_FREE(bp->slowpath, bp->slowpath_mapping,
+		       sizeof(struct bnx2x_slowpath));
+
+	BNX2X_PCI_FREE(bp->context.vcxt, bp->context.cxt_mapping,
+		       bp->context.size);
+
+	bnx2x_ilt_mem_op(bp, ILT_MEMOP_FREE);
+
+	BNX2X_FREE(bp->ilt->lines);
+
+#ifdef BCM_CNIC
+	if (!CHIP_IS_E1x(bp))
+		BNX2X_PCI_FREE(bp->cnic_sb.e2_sb, bp->cnic_sb_mapping,
+			       sizeof(struct host_hc_status_block_e2));
+	else
+		BNX2X_PCI_FREE(bp->cnic_sb.e1x_sb, bp->cnic_sb_mapping,
+			       sizeof(struct host_hc_status_block_e1x));
+
+	BNX2X_PCI_FREE(bp->t2, bp->t2_mapping, SRC_T2_SZ);
+#endif
+
+	BNX2X_PCI_FREE(bp->spq, bp->spq_mapping, BCM_PAGE_SIZE);
+
+	BNX2X_PCI_FREE(bp->eq_ring, bp->eq_mapping,
+		       BCM_PAGE_SIZE * NUM_EQ_PAGES);
+}
+
+static inline int bnx2x_alloc_fw_stats_mem(struct bnx2x *bp)
+{
+	int num_groups;
+
+	/* number of eth_queues */
+	u8 num_queue_stats = BNX2X_NUM_ETH_QUEUES(bp);
+
+	/* Total number of FW statistics requests =
+	 * 1 for port stats + 1 for PF stats + num_eth_queues */
+	bp->fw_stats_num = 2 + num_queue_stats;
+
+
+	/* Request is built from stats_query_header and an array of
+	 * stats_query_cmd_group each of which contains
+	 * STATS_QUERY_CMD_COUNT rules. The real number or requests is
+	 * configured in the stats_query_header.
+	 */
+	num_groups = (2 + num_queue_stats) / STATS_QUERY_CMD_COUNT +
+		(((2 + num_queue_stats) % STATS_QUERY_CMD_COUNT) ? 1 : 0);
+
+	bp->fw_stats_req_sz = sizeof(struct stats_query_header) +
+			num_groups * sizeof(struct stats_query_cmd_group);
+
+	/* Data for statistics requests + stats_conter
+	 *
+	 * stats_counter holds per-STORM counters that are incremented
+	 * when STORM has finished with the current request.
+	 */
+	bp->fw_stats_data_sz = sizeof(struct per_port_stats) +
+		sizeof(struct per_pf_stats) +
+		sizeof(struct per_queue_stats) * num_queue_stats +
+		sizeof(struct stats_counter);
+
+	BNX2X_PCI_ALLOC(bp->fw_stats, &bp->fw_stats_mapping,
+			bp->fw_stats_data_sz + bp->fw_stats_req_sz);
+
+	/* Set shortcuts */
+	bp->fw_stats_req = (struct bnx2x_fw_stats_req *)bp->fw_stats;
+	bp->fw_stats_req_mapping = bp->fw_stats_mapping;
+
+	bp->fw_stats_data = (struct bnx2x_fw_stats_data *)
+		((u8 *)bp->fw_stats + bp->fw_stats_req_sz);
+
+	bp->fw_stats_data_mapping = bp->fw_stats_mapping +
+				   bp->fw_stats_req_sz;
+	return 0;
+
+alloc_mem_err:
+	BNX2X_PCI_FREE(bp->fw_stats, bp->fw_stats_mapping,
+		       bp->fw_stats_data_sz + bp->fw_stats_req_sz);
+	return -ENOMEM;
+}
+
+
+int bnx2x_alloc_mem(struct bnx2x *bp)
+{
+#ifdef BCM_CNIC
+	if (!CHIP_IS_E1x(bp))
+		/* size = the status block + ramrod buffers */
+		BNX2X_PCI_ALLOC(bp->cnic_sb.e2_sb, &bp->cnic_sb_mapping,
+				sizeof(struct host_hc_status_block_e2));
+	else
+		BNX2X_PCI_ALLOC(bp->cnic_sb.e1x_sb, &bp->cnic_sb_mapping,
+				sizeof(struct host_hc_status_block_e1x));
+
+	/* allocate searcher T2 table */
+	BNX2X_PCI_ALLOC(bp->t2, &bp->t2_mapping, SRC_T2_SZ);
+#endif
+
+
+	BNX2X_PCI_ALLOC(bp->def_status_blk, &bp->def_status_blk_mapping,
+			sizeof(struct host_sp_status_block));
+
+	BNX2X_PCI_ALLOC(bp->slowpath, &bp->slowpath_mapping,
+			sizeof(struct bnx2x_slowpath));
+
+	/* Allocated memory for FW statistics  */
+	if (bnx2x_alloc_fw_stats_mem(bp))
+		goto alloc_mem_err;
+
+	bp->context.size = sizeof(union cdu_context) * BNX2X_L2_CID_COUNT(bp);
+
+	BNX2X_PCI_ALLOC(bp->context.vcxt, &bp->context.cxt_mapping,
+			bp->context.size);
+
+	BNX2X_ALLOC(bp->ilt->lines, sizeof(struct ilt_line) * ILT_MAX_LINES);
+
+	if (bnx2x_ilt_mem_op(bp, ILT_MEMOP_ALLOC))
+		goto alloc_mem_err;
+
+	/* Slow path ring */
+	BNX2X_PCI_ALLOC(bp->spq, &bp->spq_mapping, BCM_PAGE_SIZE);
+
+	/* EQ */
+	BNX2X_PCI_ALLOC(bp->eq_ring, &bp->eq_mapping,
+			BCM_PAGE_SIZE * NUM_EQ_PAGES);
+
+
+	/* fastpath */
+	/* need to be done at the end, since it's self adjusting to amount
+	 * of memory available for RSS queues
+	 */
+	if (bnx2x_alloc_fp_mem(bp))
+		goto alloc_mem_err;
+	return 0;
+
+alloc_mem_err:
+	bnx2x_free_mem(bp);
+	return -ENOMEM;
+}
+
+/*
+ * Init service functions
+ */
+
+int bnx2x_set_mac_one(struct bnx2x *bp, u8 *mac,
+		      struct bnx2x_vlan_mac_obj *obj, bool set,
+		      int mac_type, unsigned long *ramrod_flags)
+{
+	int rc;
+	struct bnx2x_vlan_mac_ramrod_params ramrod_param;
+
+	memset(&ramrod_param, 0, sizeof(ramrod_param));
+
+	/* Fill general parameters */
+	ramrod_param.vlan_mac_obj = obj;
+	ramrod_param.ramrod_flags = *ramrod_flags;
+
+	/* Fill a user request section if needed */
+	if (!test_bit(RAMROD_CONT, ramrod_flags)) {
+		memcpy(ramrod_param.user_req.u.mac.mac, mac, ETH_ALEN);
+
+		__set_bit(mac_type, &ramrod_param.user_req.vlan_mac_flags);
+
+		/* Set the command: ADD or DEL */
+		if (set)
+			ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_ADD;
+		else
+			ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_DEL;
+	}
+
+	rc = bnx2x_config_vlan_mac(bp, &ramrod_param);
+	if (rc < 0)
+		BNX2X_ERR("%s MAC failed\n", (set ? "Set" : "Del"));
+	return rc;
+}
+
+int bnx2x_del_all_macs(struct bnx2x *bp,
+		       struct bnx2x_vlan_mac_obj *mac_obj,
+		       int mac_type, bool wait_for_comp)
+{
+	int rc;
+	unsigned long ramrod_flags = 0, vlan_mac_flags = 0;
+
+	/* Wait for completion of requested */
+	if (wait_for_comp)
+		__set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
+
+	/* Set the mac type of addresses we want to clear */
+	__set_bit(mac_type, &vlan_mac_flags);
+
+	rc = mac_obj->delete_all(bp, mac_obj, &vlan_mac_flags, &ramrod_flags);
+	if (rc < 0)
+		BNX2X_ERR("Failed to delete MACs: %d\n", rc);
+
+	return rc;
+}
+
+int bnx2x_set_eth_mac(struct bnx2x *bp, bool set)
+{
+	unsigned long ramrod_flags = 0;
+
+	DP(NETIF_MSG_IFUP, "Adding Eth MAC\n");
+
+	__set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
+	/* Eth MAC is set on RSS leading client (fp[0]) */
+	return bnx2x_set_mac_one(bp, bp->dev->dev_addr, &bp->fp->mac_obj, set,
+				 BNX2X_ETH_MAC, &ramrod_flags);
+}
+
+int bnx2x_setup_leading(struct bnx2x *bp)
+{
+	return bnx2x_setup_queue(bp, &bp->fp[0], 1);
+}
+
+/**
+ * bnx2x_set_int_mode - configure interrupt mode
+ *
+ * @bp:		driver handle
+ *
+ * In case of MSI-X it will also try to enable MSI-X.
+ */
+static void __devinit bnx2x_set_int_mode(struct bnx2x *bp)
+{
+	switch (int_mode) {
+	case INT_MODE_MSI:
+		bnx2x_enable_msi(bp);
+		/* falling through... */
+	case INT_MODE_INTx:
+		bp->num_queues = 1 + NON_ETH_CONTEXT_USE;
+		DP(NETIF_MSG_IFUP, "set number of queues to 1\n");
+		break;
+	default:
+		/* Set number of queues according to bp->multi_mode value */
+		bnx2x_set_num_queues(bp);
+
+		DP(NETIF_MSG_IFUP, "set number of queues to %d\n",
+		   bp->num_queues);
+
+		/* if we can't use MSI-X we only need one fp,
+		 * so try to enable MSI-X with the requested number of fp's
+		 * and fallback to MSI or legacy INTx with one fp
+		 */
+		if (bnx2x_enable_msix(bp)) {
+			/* failed to enable MSI-X */
+			if (bp->multi_mode)
+				DP(NETIF_MSG_IFUP,
+					  "Multi requested but failed to "
+					  "enable MSI-X (%d), "
+					  "set number of queues to %d\n",
+				   bp->num_queues,
+				   1 + NON_ETH_CONTEXT_USE);
+			bp->num_queues = 1 + NON_ETH_CONTEXT_USE;
+
+			/* Try to enable MSI */
+			if (!(bp->flags & DISABLE_MSI_FLAG))
+				bnx2x_enable_msi(bp);
+		}
+		break;
+	}
+}
+
+/* must be called prioir to any HW initializations */
+static inline u16 bnx2x_cid_ilt_lines(struct bnx2x *bp)
+{
+	return L2_ILT_LINES(bp);
+}
+
+void bnx2x_ilt_set_info(struct bnx2x *bp)
+{
+	struct ilt_client_info *ilt_client;
+	struct bnx2x_ilt *ilt = BP_ILT(bp);
+	u16 line = 0;
+
+	ilt->start_line = FUNC_ILT_BASE(BP_FUNC(bp));
+	DP(BNX2X_MSG_SP, "ilt starts at line %d\n", ilt->start_line);
+
+	/* CDU */
+	ilt_client = &ilt->clients[ILT_CLIENT_CDU];
+	ilt_client->client_num = ILT_CLIENT_CDU;
+	ilt_client->page_size = CDU_ILT_PAGE_SZ;
+	ilt_client->flags = ILT_CLIENT_SKIP_MEM;
+	ilt_client->start = line;
+	line += bnx2x_cid_ilt_lines(bp);
+#ifdef BCM_CNIC
+	line += CNIC_ILT_LINES;
+#endif
+	ilt_client->end = line - 1;
+
+	DP(BNX2X_MSG_SP, "ilt client[CDU]: start %d, end %d, psz 0x%x, "
+					 "flags 0x%x, hw psz %d\n",
+	   ilt_client->start,
+	   ilt_client->end,
+	   ilt_client->page_size,
+	   ilt_client->flags,
+	   ilog2(ilt_client->page_size >> 12));
+
+	/* QM */
+	if (QM_INIT(bp->qm_cid_count)) {
+		ilt_client = &ilt->clients[ILT_CLIENT_QM];
+		ilt_client->client_num = ILT_CLIENT_QM;
+		ilt_client->page_size = QM_ILT_PAGE_SZ;
+		ilt_client->flags = 0;
+		ilt_client->start = line;
+
+		/* 4 bytes for each cid */
+		line += DIV_ROUND_UP(bp->qm_cid_count * QM_QUEUES_PER_FUNC * 4,
+							 QM_ILT_PAGE_SZ);
+
+		ilt_client->end = line - 1;
+
+		DP(BNX2X_MSG_SP, "ilt client[QM]: start %d, end %d, psz 0x%x, "
+						 "flags 0x%x, hw psz %d\n",
+		   ilt_client->start,
+		   ilt_client->end,
+		   ilt_client->page_size,
+		   ilt_client->flags,
+		   ilog2(ilt_client->page_size >> 12));
+
+	}
+	/* SRC */
+	ilt_client = &ilt->clients[ILT_CLIENT_SRC];
+#ifdef BCM_CNIC
+	ilt_client->client_num = ILT_CLIENT_SRC;
+	ilt_client->page_size = SRC_ILT_PAGE_SZ;
+	ilt_client->flags = 0;
+	ilt_client->start = line;
+	line += SRC_ILT_LINES;
+	ilt_client->end = line - 1;
+
+	DP(BNX2X_MSG_SP, "ilt client[SRC]: start %d, end %d, psz 0x%x, "
+					 "flags 0x%x, hw psz %d\n",
+	   ilt_client->start,
+	   ilt_client->end,
+	   ilt_client->page_size,
+	   ilt_client->flags,
+	   ilog2(ilt_client->page_size >> 12));
+
+#else
+	ilt_client->flags = (ILT_CLIENT_SKIP_INIT | ILT_CLIENT_SKIP_MEM);
+#endif
+
+	/* TM */
+	ilt_client = &ilt->clients[ILT_CLIENT_TM];
+#ifdef BCM_CNIC
+	ilt_client->client_num = ILT_CLIENT_TM;
+	ilt_client->page_size = TM_ILT_PAGE_SZ;
+	ilt_client->flags = 0;
+	ilt_client->start = line;
+	line += TM_ILT_LINES;
+	ilt_client->end = line - 1;
+
+	DP(BNX2X_MSG_SP, "ilt client[TM]: start %d, end %d, psz 0x%x, "
+					 "flags 0x%x, hw psz %d\n",
+	   ilt_client->start,
+	   ilt_client->end,
+	   ilt_client->page_size,
+	   ilt_client->flags,
+	   ilog2(ilt_client->page_size >> 12));
+
+#else
+	ilt_client->flags = (ILT_CLIENT_SKIP_INIT | ILT_CLIENT_SKIP_MEM);
+#endif
+	BUG_ON(line > ILT_MAX_LINES);
+}
+
+/**
+ * bnx2x_pf_q_prep_init - prepare INIT transition parameters
+ *
+ * @bp:			driver handle
+ * @fp:			pointer to fastpath
+ * @init_params:	pointer to parameters structure
+ *
+ * parameters configured:
+ *      - HC configuration
+ *      - Queue's CDU context
+ */
+static inline void bnx2x_pf_q_prep_init(struct bnx2x *bp,
+	struct bnx2x_fastpath *fp, struct bnx2x_queue_init_params *init_params)
+{
+
+	u8 cos;
+	/* FCoE Queue uses Default SB, thus has no HC capabilities */
+	if (!IS_FCOE_FP(fp)) {
+		__set_bit(BNX2X_Q_FLG_HC, &init_params->rx.flags);
+		__set_bit(BNX2X_Q_FLG_HC, &init_params->tx.flags);
+
+		/* If HC is supporterd, enable host coalescing in the transition
+		 * to INIT state.
+		 */
+		__set_bit(BNX2X_Q_FLG_HC_EN, &init_params->rx.flags);
+		__set_bit(BNX2X_Q_FLG_HC_EN, &init_params->tx.flags);
+
+		/* HC rate */
+		init_params->rx.hc_rate = bp->rx_ticks ?
+			(1000000 / bp->rx_ticks) : 0;
+		init_params->tx.hc_rate = bp->tx_ticks ?
+			(1000000 / bp->tx_ticks) : 0;
+
+		/* FW SB ID */
+		init_params->rx.fw_sb_id = init_params->tx.fw_sb_id =
+			fp->fw_sb_id;
+
+		/*
+		 * CQ index among the SB indices: FCoE clients uses the default
+		 * SB, therefore it's different.
+		 */
+		init_params->rx.sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS;
+		init_params->tx.sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS;
+	}
+
+	/* set maximum number of COSs supported by this queue */
+	init_params->max_cos = fp->max_cos;
+
+	DP(BNX2X_MSG_SP, "fp: %d setting queue params max cos to: %d",
+	    fp->index, init_params->max_cos);
+
+	/* set the context pointers queue object */
+	for (cos = FIRST_TX_COS_INDEX; cos < init_params->max_cos; cos++)
+		init_params->cxts[cos] =
+			&bp->context.vcxt[fp->txdata[cos].cid].eth;
+}
+
+int bnx2x_setup_tx_only(struct bnx2x *bp, struct bnx2x_fastpath *fp,
+			struct bnx2x_queue_state_params *q_params,
+			struct bnx2x_queue_setup_tx_only_params *tx_only_params,
+			int tx_index, bool leading)
+{
+	memset(tx_only_params, 0, sizeof(*tx_only_params));
+
+	/* Set the command */
+	q_params->cmd = BNX2X_Q_CMD_SETUP_TX_ONLY;
+
+	/* Set tx-only QUEUE flags: don't zero statistics */
+	tx_only_params->flags = bnx2x_get_common_flags(bp, fp, false);
+
+	/* choose the index of the cid to send the slow path on */
+	tx_only_params->cid_index = tx_index;
+
+	/* Set general TX_ONLY_SETUP parameters */
+	bnx2x_pf_q_prep_general(bp, fp, &tx_only_params->gen_params, tx_index);
+
+	/* Set Tx TX_ONLY_SETUP parameters */
+	bnx2x_pf_tx_q_prep(bp, fp, &tx_only_params->txq_params, tx_index);
+
+	DP(BNX2X_MSG_SP, "preparing to send tx-only ramrod for connection:"
+			 "cos %d, primary cid %d, cid %d, "
+			 "client id %d, sp-client id %d, flags %lx",
+	   tx_index, q_params->q_obj->cids[FIRST_TX_COS_INDEX],
+	   q_params->q_obj->cids[tx_index], q_params->q_obj->cl_id,
+	   tx_only_params->gen_params.spcl_id, tx_only_params->flags);
+
+	/* send the ramrod */
+	return bnx2x_queue_state_change(bp, q_params);
+}
+
+
+/**
+ * bnx2x_setup_queue - setup queue
+ *
+ * @bp:		driver handle
+ * @fp:		pointer to fastpath
+ * @leading:	is leading
+ *
+ * This function performs 2 steps in a Queue state machine
+ *      actually: 1) RESET->INIT 2) INIT->SETUP
+ */
+
+int bnx2x_setup_queue(struct bnx2x *bp, struct bnx2x_fastpath *fp,
+		       bool leading)
+{
+	struct bnx2x_queue_state_params q_params = {0};
+	struct bnx2x_queue_setup_params *setup_params =
+						&q_params.params.setup;
+	struct bnx2x_queue_setup_tx_only_params *tx_only_params =
+						&q_params.params.tx_only;
+	int rc;
+	u8 tx_index;
+
+	DP(BNX2X_MSG_SP, "setting up queue %d", fp->index);
+
+	/* reset IGU state skip FCoE L2 queue */
+	if (!IS_FCOE_FP(fp))
+		bnx2x_ack_sb(bp, fp->igu_sb_id, USTORM_ID, 0,
+			     IGU_INT_ENABLE, 0);
+
+	q_params.q_obj = &fp->q_obj;
+	/* We want to wait for completion in this context */
+	__set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
+
+	/* Prepare the INIT parameters */
+	bnx2x_pf_q_prep_init(bp, fp, &q_params.params.init);
+
+	/* Set the command */
+	q_params.cmd = BNX2X_Q_CMD_INIT;
+
+	/* Change the state to INIT */
+	rc = bnx2x_queue_state_change(bp, &q_params);
+	if (rc) {
+		BNX2X_ERR("Queue(%d) INIT failed\n", fp->index);
+		return rc;
+	}
+
+	DP(BNX2X_MSG_SP, "init complete");
+
+
+	/* Now move the Queue to the SETUP state... */
+	memset(setup_params, 0, sizeof(*setup_params));
+
+	/* Set QUEUE flags */
+	setup_params->flags = bnx2x_get_q_flags(bp, fp, leading);
+
+	/* Set general SETUP parameters */
+	bnx2x_pf_q_prep_general(bp, fp, &setup_params->gen_params,
+				FIRST_TX_COS_INDEX);
+
+	bnx2x_pf_rx_q_prep(bp, fp, &setup_params->pause_params,
+			    &setup_params->rxq_params);
+
+	bnx2x_pf_tx_q_prep(bp, fp, &setup_params->txq_params,
+			   FIRST_TX_COS_INDEX);
+
+	/* Set the command */
+	q_params.cmd = BNX2X_Q_CMD_SETUP;
+
+	/* Change the state to SETUP */
+	rc = bnx2x_queue_state_change(bp, &q_params);
+	if (rc) {
+		BNX2X_ERR("Queue(%d) SETUP failed\n", fp->index);
+		return rc;
+	}
+
+	/* loop through the relevant tx-only indices */
+	for (tx_index = FIRST_TX_ONLY_COS_INDEX;
+	      tx_index < fp->max_cos;
+	      tx_index++) {
+
+		/* prepare and send tx-only ramrod*/
+		rc = bnx2x_setup_tx_only(bp, fp, &q_params,
+					  tx_only_params, tx_index, leading);
+		if (rc) {
+			BNX2X_ERR("Queue(%d.%d) TX_ONLY_SETUP failed\n",
+				  fp->index, tx_index);
+			return rc;
+		}
+	}
+
+	return rc;
+}
+
+static int bnx2x_stop_queue(struct bnx2x *bp, int index)
+{
+	struct bnx2x_fastpath *fp = &bp->fp[index];
+	struct bnx2x_fp_txdata *txdata;
+	struct bnx2x_queue_state_params q_params = {0};
+	int rc, tx_index;
+
+	DP(BNX2X_MSG_SP, "stopping queue %d cid %d", index, fp->cid);
+
+	q_params.q_obj = &fp->q_obj;
+	/* We want to wait for completion in this context */
+	__set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
+
+
+	/* close tx-only connections */
+	for (tx_index = FIRST_TX_ONLY_COS_INDEX;
+	     tx_index < fp->max_cos;
+	     tx_index++){
+
+		/* ascertain this is a normal queue*/
+		txdata = &fp->txdata[tx_index];
+
+		DP(BNX2X_MSG_SP, "stopping tx-only queue %d",
+							txdata->txq_index);
+
+		/* send halt terminate on tx-only connection */
+		q_params.cmd = BNX2X_Q_CMD_TERMINATE;
+		memset(&q_params.params.terminate, 0,
+		       sizeof(q_params.params.terminate));
+		q_params.params.terminate.cid_index = tx_index;
+
+		rc = bnx2x_queue_state_change(bp, &q_params);
+		if (rc)
+			return rc;
+
+		/* send halt terminate on tx-only connection */
+		q_params.cmd = BNX2X_Q_CMD_CFC_DEL;
+		memset(&q_params.params.cfc_del, 0,
+		       sizeof(q_params.params.cfc_del));
+		q_params.params.cfc_del.cid_index = tx_index;
+		rc = bnx2x_queue_state_change(bp, &q_params);
+		if (rc)
+			return rc;
+	}
+	/* Stop the primary connection: */
+	/* ...halt the connection */
+	q_params.cmd = BNX2X_Q_CMD_HALT;
+	rc = bnx2x_queue_state_change(bp, &q_params);
+	if (rc)
+		return rc;
+
+	/* ...terminate the connection */
+	q_params.cmd = BNX2X_Q_CMD_TERMINATE;
+	memset(&q_params.params.terminate, 0,
+	       sizeof(q_params.params.terminate));
+	q_params.params.terminate.cid_index = FIRST_TX_COS_INDEX;
+	rc = bnx2x_queue_state_change(bp, &q_params);
+	if (rc)
+		return rc;
+	/* ...delete cfc entry */
+	q_params.cmd = BNX2X_Q_CMD_CFC_DEL;
+	memset(&q_params.params.cfc_del, 0,
+	       sizeof(q_params.params.cfc_del));
+	q_params.params.cfc_del.cid_index = FIRST_TX_COS_INDEX;
+	return bnx2x_queue_state_change(bp, &q_params);
+}
+
+
+static void bnx2x_reset_func(struct bnx2x *bp)
+{
+	int port = BP_PORT(bp);
+	int func = BP_FUNC(bp);
+	int i;
+
+	/* Disable the function in the FW */
+	REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(func), 0);
+	REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(func), 0);
+	REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(func), 0);
+	REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(func), 0);
+
+	/* FP SBs */
+	for_each_eth_queue(bp, i) {
+		struct bnx2x_fastpath *fp = &bp->fp[i];
+		REG_WR8(bp, BAR_CSTRORM_INTMEM +
+			   CSTORM_STATUS_BLOCK_DATA_STATE_OFFSET(fp->fw_sb_id),
+			   SB_DISABLED);
+	}
+
+#ifdef BCM_CNIC
+	/* CNIC SB */
+	REG_WR8(bp, BAR_CSTRORM_INTMEM +
+		CSTORM_STATUS_BLOCK_DATA_STATE_OFFSET(bnx2x_cnic_fw_sb_id(bp)),
+		SB_DISABLED);
+#endif
+	/* SP SB */
+	REG_WR8(bp, BAR_CSTRORM_INTMEM +
+		   CSTORM_SP_STATUS_BLOCK_DATA_STATE_OFFSET(func),
+		   SB_DISABLED);
+
+	for (i = 0; i < XSTORM_SPQ_DATA_SIZE / 4; i++)
+		REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_DATA_OFFSET(func),
+		       0);
+
+	/* Configure IGU */
+	if (bp->common.int_block == INT_BLOCK_HC) {
+		REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0);
+		REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0);
+	} else {
+		REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, 0);
+		REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, 0);
+	}
+
+#ifdef BCM_CNIC
+	/* Disable Timer scan */
+	REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + port*4, 0);
+	/*
+	 * Wait for at least 10ms and up to 2 second for the timers scan to
+	 * complete
+	 */
+	for (i = 0; i < 200; i++) {
+		msleep(10);
+		if (!REG_RD(bp, TM_REG_LIN0_SCAN_ON + port*4))
+			break;
+	}
+#endif
+	/* Clear ILT */
+	bnx2x_clear_func_ilt(bp, func);
+
+	/* Timers workaround bug for E2: if this is vnic-3,
+	 * we need to set the entire ilt range for this timers.
+	 */
+	if (!CHIP_IS_E1x(bp) && BP_VN(bp) == 3) {
+		struct ilt_client_info ilt_cli;
+		/* use dummy TM client */
+		memset(&ilt_cli, 0, sizeof(struct ilt_client_info));
+		ilt_cli.start = 0;
+		ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1;
+		ilt_cli.client_num = ILT_CLIENT_TM;
+
+		bnx2x_ilt_boundry_init_op(bp, &ilt_cli, 0, INITOP_CLEAR);
+	}
+
+	/* this assumes that reset_port() called before reset_func()*/
+	if (!CHIP_IS_E1x(bp))
+		bnx2x_pf_disable(bp);
+
+	bp->dmae_ready = 0;
+}
+
+static void bnx2x_reset_port(struct bnx2x *bp)
+{
+	int port = BP_PORT(bp);
+	u32 val;
+
+	/* Reset physical Link */
+	bnx2x__link_reset(bp);
+
+	REG_WR(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, 0);
+
+	/* Do not rcv packets to BRB */
+	REG_WR(bp, NIG_REG_LLH0_BRB1_DRV_MASK + port*4, 0x0);
+	/* Do not direct rcv packets that are not for MCP to the BRB */
+	REG_WR(bp, (port ? NIG_REG_LLH1_BRB1_NOT_MCP :
+			   NIG_REG_LLH0_BRB1_NOT_MCP), 0x0);
+
+	/* Configure AEU */
+	REG_WR(bp, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port*4, 0);
+
+	msleep(100);
+	/* Check for BRB port occupancy */
+	val = REG_RD(bp, BRB1_REG_PORT_NUM_OCC_BLOCKS_0 + port*4);
+	if (val)
+		DP(NETIF_MSG_IFDOWN,
+		   "BRB1 is not empty  %d blocks are occupied\n", val);
+
+	/* TODO: Close Doorbell port? */
+}
+
+static inline int bnx2x_reset_hw(struct bnx2x *bp, u32 load_code)
+{
+	struct bnx2x_func_state_params func_params = {0};
+
+	/* Prepare parameters for function state transitions */
+	__set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
+
+	func_params.f_obj = &bp->func_obj;
+	func_params.cmd = BNX2X_F_CMD_HW_RESET;
+
+	func_params.params.hw_init.load_phase = load_code;
+
+	return bnx2x_func_state_change(bp, &func_params);
+}
+
+static inline int bnx2x_func_stop(struct bnx2x *bp)
+{
+	struct bnx2x_func_state_params func_params = {0};
+	int rc;
+
+	/* Prepare parameters for function state transitions */
+	__set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
+	func_params.f_obj = &bp->func_obj;
+	func_params.cmd = BNX2X_F_CMD_STOP;
+
+	/*
+	 * Try to stop the function the 'good way'. If fails (in case
+	 * of a parity error during bnx2x_chip_cleanup()) and we are
+	 * not in a debug mode, perform a state transaction in order to
+	 * enable further HW_RESET transaction.
+	 */
+	rc = bnx2x_func_state_change(bp, &func_params);
+	if (rc) {
+#ifdef BNX2X_STOP_ON_ERROR
+		return rc;
+#else
+		BNX2X_ERR("FUNC_STOP ramrod failed. Running a dry "
+			  "transaction\n");
+		__set_bit(RAMROD_DRV_CLR_ONLY, &func_params.ramrod_flags);
+		return bnx2x_func_state_change(bp, &func_params);
+#endif
+	}
+
+	return 0;
+}
+
+/**
+ * bnx2x_send_unload_req - request unload mode from the MCP.
+ *
+ * @bp:			driver handle
+ * @unload_mode:	requested function's unload mode
+ *
+ * Return unload mode returned by the MCP: COMMON, PORT or FUNC.
+ */
+u32 bnx2x_send_unload_req(struct bnx2x *bp, int unload_mode)
+{
+	u32 reset_code = 0;
+	int port = BP_PORT(bp);
+
+	/* Select the UNLOAD request mode */
+	if (unload_mode == UNLOAD_NORMAL)
+		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
+
+	else if (bp->flags & NO_WOL_FLAG)
+		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP;
+
+	else if (bp->wol) {
+		u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
+		u8 *mac_addr = bp->dev->dev_addr;
+		u32 val;
+		/* The mac address is written to entries 1-4 to
+		   preserve entry 0 which is used by the PMF */
+		u8 entry = (BP_E1HVN(bp) + 1)*8;
+
+		val = (mac_addr[0] << 8) | mac_addr[1];
+		EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry, val);
+
+		val = (mac_addr[2] << 24) | (mac_addr[3] << 16) |
+		      (mac_addr[4] << 8) | mac_addr[5];
+		EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry + 4, val);
+
+		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_EN;
+
+	} else
+		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
+
+	/* Send the request to the MCP */
+	if (!BP_NOMCP(bp))
+		reset_code = bnx2x_fw_command(bp, reset_code, 0);
+	else {
+		int path = BP_PATH(bp);
+
+		DP(NETIF_MSG_IFDOWN, "NO MCP - load counts[%d]      "
+				     "%d, %d, %d\n",
+		   path, load_count[path][0], load_count[path][1],
+		   load_count[path][2]);
+		load_count[path][0]--;
+		load_count[path][1 + port]--;
+		DP(NETIF_MSG_IFDOWN, "NO MCP - new load counts[%d]  "
+				     "%d, %d, %d\n",
+		   path, load_count[path][0], load_count[path][1],
+		   load_count[path][2]);
+		if (load_count[path][0] == 0)
+			reset_code = FW_MSG_CODE_DRV_UNLOAD_COMMON;
+		else if (load_count[path][1 + port] == 0)
+			reset_code = FW_MSG_CODE_DRV_UNLOAD_PORT;
+		else
+			reset_code = FW_MSG_CODE_DRV_UNLOAD_FUNCTION;
+	}
+
+	return reset_code;
+}
+
+/**
+ * bnx2x_send_unload_done - send UNLOAD_DONE command to the MCP.
+ *
+ * @bp:		driver handle
+ */
+void bnx2x_send_unload_done(struct bnx2x *bp)
+{
+	/* Report UNLOAD_DONE to MCP */
+	if (!BP_NOMCP(bp))
+		bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0);
+}
+
+static inline int bnx2x_func_wait_started(struct bnx2x *bp)
+{
+	int tout = 50;
+	int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0;
+
+	if (!bp->port.pmf)
+		return 0;
+
+	/*
+	 * (assumption: No Attention from MCP at this stage)
+	 * PMF probably in the middle of TXdisable/enable transaction
+	 * 1. Sync IRS for default SB
+	 * 2. Sync SP queue - this guarantes us that attention handling started
+	 * 3. Wait, that TXdisable/enable transaction completes
+	 *
+	 * 1+2 guranty that if DCBx attention was scheduled it already changed
+	 * pending bit of transaction from STARTED-->TX_STOPPED, if we alredy
+	 * received complettion for the transaction the state is TX_STOPPED.
+	 * State will return to STARTED after completion of TX_STOPPED-->STARTED
+	 * transaction.
+	 */
+
+	/* make sure default SB ISR is done */
+	if (msix)
+		synchronize_irq(bp->msix_table[0].vector);
+	else
+		synchronize_irq(bp->pdev->irq);
+
+	flush_workqueue(bnx2x_wq);
+
+	while (bnx2x_func_get_state(bp, &bp->func_obj) !=
+				BNX2X_F_STATE_STARTED && tout--)
+		msleep(20);
+
+	if (bnx2x_func_get_state(bp, &bp->func_obj) !=
+						BNX2X_F_STATE_STARTED) {
+#ifdef BNX2X_STOP_ON_ERROR
+		return -EBUSY;
+#else
+		/*
+		 * Failed to complete the transaction in a "good way"
+		 * Force both transactions with CLR bit
+		 */
+		struct bnx2x_func_state_params func_params = {0};
+
+		DP(BNX2X_MSG_SP, "Hmmm... unexpected function state! "
+			  "Forcing STARTED-->TX_ST0PPED-->STARTED\n");
+
+		func_params.f_obj = &bp->func_obj;
+		__set_bit(RAMROD_DRV_CLR_ONLY,
+					&func_params.ramrod_flags);
+
+		/* STARTED-->TX_ST0PPED */
+		func_params.cmd = BNX2X_F_CMD_TX_STOP;
+		bnx2x_func_state_change(bp, &func_params);
+
+		/* TX_ST0PPED-->STARTED */
+		func_params.cmd = BNX2X_F_CMD_TX_START;
+		return bnx2x_func_state_change(bp, &func_params);
+#endif
+	}
+
+	return 0;
+}
+
+void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode)
+{
+	int port = BP_PORT(bp);
+	int i, rc = 0;
+	u8 cos;
+	struct bnx2x_mcast_ramrod_params rparam = {0};
+	u32 reset_code;
+
+	/* Wait until tx fastpath tasks complete */
+	for_each_tx_queue(bp, i) {
+		struct bnx2x_fastpath *fp = &bp->fp[i];
+
+		for_each_cos_in_tx_queue(fp, cos)
+			rc = bnx2x_clean_tx_queue(bp, &fp->txdata[cos]);
+#ifdef BNX2X_STOP_ON_ERROR
+		if (rc)
+			return;
+#endif
+	}
+
+	/* Give HW time to discard old tx messages */
+	usleep_range(1000, 1000);
+
+	/* Clean all ETH MACs */
+	rc = bnx2x_del_all_macs(bp, &bp->fp[0].mac_obj, BNX2X_ETH_MAC, false);
+	if (rc < 0)
+		BNX2X_ERR("Failed to delete all ETH macs: %d\n", rc);
+
+	/* Clean up UC list  */
+	rc = bnx2x_del_all_macs(bp, &bp->fp[0].mac_obj, BNX2X_UC_LIST_MAC,
+				true);
+	if (rc < 0)
+		BNX2X_ERR("Failed to schedule DEL commands for UC MACs list: "
+			  "%d\n", rc);
+
+	/* Disable LLH */
+	if (!CHIP_IS_E1(bp))
+		REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0);
+
+	/* Set "drop all" (stop Rx).
+	 * We need to take a netif_addr_lock() here in order to prevent
+	 * a race between the completion code and this code.
+	 */
+	netif_addr_lock_bh(bp->dev);
+	/* Schedule the rx_mode command */
+	if (test_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state))
+		set_bit(BNX2X_FILTER_RX_MODE_SCHED, &bp->sp_state);
+	else
+		bnx2x_set_storm_rx_mode(bp);
+
+	/* Cleanup multicast configuration */
+	rparam.mcast_obj = &bp->mcast_obj;
+	rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_DEL);
+	if (rc < 0)
+		BNX2X_ERR("Failed to send DEL multicast command: %d\n", rc);
+
+	netif_addr_unlock_bh(bp->dev);
+
+
+
+	/*
+	 * Send the UNLOAD_REQUEST to the MCP. This will return if
+	 * this function should perform FUNC, PORT or COMMON HW
+	 * reset.
+	 */
+	reset_code = bnx2x_send_unload_req(bp, unload_mode);
+
+	/*
+	 * (assumption: No Attention from MCP at this stage)
+	 * PMF probably in the middle of TXdisable/enable transaction
+	 */
+	rc = bnx2x_func_wait_started(bp);
+	if (rc) {
+		BNX2X_ERR("bnx2x_func_wait_started failed\n");
+#ifdef BNX2X_STOP_ON_ERROR
+		return;
+#endif
+	}
+
+	/* Close multi and leading connections
+	 * Completions for ramrods are collected in a synchronous way
+	 */
+	for_each_queue(bp, i)
+		if (bnx2x_stop_queue(bp, i))
+#ifdef BNX2X_STOP_ON_ERROR
+			return;
+#else
+			goto unload_error;
+#endif
+	/* If SP settings didn't get completed so far - something
+	 * very wrong has happen.
+	 */
+	if (!bnx2x_wait_sp_comp(bp, ~0x0UL))
+		BNX2X_ERR("Hmmm... Common slow path ramrods got stuck!\n");
+
+#ifndef BNX2X_STOP_ON_ERROR
+unload_error:
+#endif
+	rc = bnx2x_func_stop(bp);
+	if (rc) {
+		BNX2X_ERR("Function stop failed!\n");
+#ifdef BNX2X_STOP_ON_ERROR
+		return;
+#endif
+	}
+
+	/* Disable HW interrupts, NAPI */
+	bnx2x_netif_stop(bp, 1);
+
+	/* Release IRQs */
+	bnx2x_free_irq(bp);
+
+	/* Reset the chip */
+	rc = bnx2x_reset_hw(bp, reset_code);
+	if (rc)
+		BNX2X_ERR("HW_RESET failed\n");
+
+
+	/* Report UNLOAD_DONE to MCP */
+	bnx2x_send_unload_done(bp);
+}
+
+void bnx2x_disable_close_the_gate(struct bnx2x *bp)
+{
+	u32 val;
+
+	DP(NETIF_MSG_HW, "Disabling \"close the gates\"\n");
+
+	if (CHIP_IS_E1(bp)) {
+		int port = BP_PORT(bp);
+		u32 addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
+			MISC_REG_AEU_MASK_ATTN_FUNC_0;
+
+		val = REG_RD(bp, addr);
+		val &= ~(0x300);
+		REG_WR(bp, addr, val);
+	} else {
+		val = REG_RD(bp, MISC_REG_AEU_GENERAL_MASK);
+		val &= ~(MISC_AEU_GENERAL_MASK_REG_AEU_PXP_CLOSE_MASK |
+			 MISC_AEU_GENERAL_MASK_REG_AEU_NIG_CLOSE_MASK);
+		REG_WR(bp, MISC_REG_AEU_GENERAL_MASK, val);
+	}
+}
+
+/* Close gates #2, #3 and #4: */
+static void bnx2x_set_234_gates(struct bnx2x *bp, bool close)
+{
+	u32 val;
+
+	/* Gates #2 and #4a are closed/opened for "not E1" only */
+	if (!CHIP_IS_E1(bp)) {
+		/* #4 */
+		REG_WR(bp, PXP_REG_HST_DISCARD_DOORBELLS, !!close);
+		/* #2 */
+		REG_WR(bp, PXP_REG_HST_DISCARD_INTERNAL_WRITES, !!close);
+	}
+
+	/* #3 */
+	if (CHIP_IS_E1x(bp)) {
+		/* Prevent interrupts from HC on both ports */
+		val = REG_RD(bp, HC_REG_CONFIG_1);
+		REG_WR(bp, HC_REG_CONFIG_1,
+		       (!close) ? (val | HC_CONFIG_1_REG_BLOCK_DISABLE_1) :
+		       (val & ~(u32)HC_CONFIG_1_REG_BLOCK_DISABLE_1));
+
+		val = REG_RD(bp, HC_REG_CONFIG_0);
+		REG_WR(bp, HC_REG_CONFIG_0,
+		       (!close) ? (val | HC_CONFIG_0_REG_BLOCK_DISABLE_0) :
+		       (val & ~(u32)HC_CONFIG_0_REG_BLOCK_DISABLE_0));
+	} else {
+		/* Prevent incomming interrupts in IGU */
+		val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION);
+
+		REG_WR(bp, IGU_REG_BLOCK_CONFIGURATION,
+		       (!close) ?
+		       (val | IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE) :
+		       (val & ~(u32)IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE));
+	}
+
+	DP(NETIF_MSG_HW, "%s gates #2, #3 and #4\n",
+		close ? "closing" : "opening");
+	mmiowb();
+}
+
+#define SHARED_MF_CLP_MAGIC  0x80000000 /* `magic' bit */
+
+static void bnx2x_clp_reset_prep(struct bnx2x *bp, u32 *magic_val)
+{
+	/* Do some magic... */
+	u32 val = MF_CFG_RD(bp, shared_mf_config.clp_mb);
+	*magic_val = val & SHARED_MF_CLP_MAGIC;
+	MF_CFG_WR(bp, shared_mf_config.clp_mb, val | SHARED_MF_CLP_MAGIC);
+}
+
+/**
+ * bnx2x_clp_reset_done - restore the value of the `magic' bit.
+ *
+ * @bp:		driver handle
+ * @magic_val:	old value of the `magic' bit.
+ */
+static void bnx2x_clp_reset_done(struct bnx2x *bp, u32 magic_val)
+{
+	/* Restore the `magic' bit value... */
+	u32 val = MF_CFG_RD(bp, shared_mf_config.clp_mb);
+	MF_CFG_WR(bp, shared_mf_config.clp_mb,
+		(val & (~SHARED_MF_CLP_MAGIC)) | magic_val);
+}
+
+/**
+ * bnx2x_reset_mcp_prep - prepare for MCP reset.
+ *
+ * @bp:		driver handle
+ * @magic_val:	old value of 'magic' bit.
+ *
+ * Takes care of CLP configurations.
+ */
+static void bnx2x_reset_mcp_prep(struct bnx2x *bp, u32 *magic_val)
+{
+	u32 shmem;
+	u32 validity_offset;
+
+	DP(NETIF_MSG_HW, "Starting\n");
+
+	/* Set `magic' bit in order to save MF config */
+	if (!CHIP_IS_E1(bp))
+		bnx2x_clp_reset_prep(bp, magic_val);
+
+	/* Get shmem offset */
+	shmem = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR);
+	validity_offset = offsetof(struct shmem_region, validity_map[0]);
+
+	/* Clear validity map flags */
+	if (shmem > 0)
+		REG_WR(bp, shmem + validity_offset, 0);
+}
+
+#define MCP_TIMEOUT      5000   /* 5 seconds (in ms) */
+#define MCP_ONE_TIMEOUT  100    /* 100 ms */
+
+/**
+ * bnx2x_mcp_wait_one - wait for MCP_ONE_TIMEOUT
+ *
+ * @bp:	driver handle
+ */
+static inline void bnx2x_mcp_wait_one(struct bnx2x *bp)
+{
+	/* special handling for emulation and FPGA,
+	   wait 10 times longer */
+	if (CHIP_REV_IS_SLOW(bp))
+		msleep(MCP_ONE_TIMEOUT*10);
+	else
+		msleep(MCP_ONE_TIMEOUT);
+}
+
+/*
+ * initializes bp->common.shmem_base and waits for validity signature to appear
+ */
+static int bnx2x_init_shmem(struct bnx2x *bp)
+{
+	int cnt = 0;
+	u32 val = 0;
+
+	do {
+		bp->common.shmem_base = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR);
+		if (bp->common.shmem_base) {
+			val = SHMEM_RD(bp, validity_map[BP_PORT(bp)]);
+			if (val & SHR_MEM_VALIDITY_MB)
+				return 0;
+		}
+
+		bnx2x_mcp_wait_one(bp);
+
+	} while (cnt++ < (MCP_TIMEOUT / MCP_ONE_TIMEOUT));
+
+	BNX2X_ERR("BAD MCP validity signature\n");
+
+	return -ENODEV;
+}
+
+static int bnx2x_reset_mcp_comp(struct bnx2x *bp, u32 magic_val)
+{
+	int rc = bnx2x_init_shmem(bp);
+
+	/* Restore the `magic' bit value */
+	if (!CHIP_IS_E1(bp))
+		bnx2x_clp_reset_done(bp, magic_val);
+
+	return rc;
+}
+
+static void bnx2x_pxp_prep(struct bnx2x *bp)
+{
+	if (!CHIP_IS_E1(bp)) {
+		REG_WR(bp, PXP2_REG_RD_START_INIT, 0);
+		REG_WR(bp, PXP2_REG_RQ_RBC_DONE, 0);
+		mmiowb();
+	}
+}
+
+/*
+ * Reset the whole chip except for:
+ *      - PCIE core
+ *      - PCI Glue, PSWHST, PXP/PXP2 RF (all controlled by
+ *              one reset bit)
+ *      - IGU
+ *      - MISC (including AEU)
+ *      - GRC
+ *      - RBCN, RBCP
+ */
+static void bnx2x_process_kill_chip_reset(struct bnx2x *bp, bool global)
+{
+	u32 not_reset_mask1, reset_mask1, not_reset_mask2, reset_mask2;
+	u32 global_bits2, stay_reset2;
+
+	/*
+	 * Bits that have to be set in reset_mask2 if we want to reset 'global'
+	 * (per chip) blocks.
+	 */
+	global_bits2 =
+		MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CPU |
+		MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CORE;
+
+	/* Don't reset the following blocks */
+	not_reset_mask1 =
+		MISC_REGISTERS_RESET_REG_1_RST_HC |
+		MISC_REGISTERS_RESET_REG_1_RST_PXPV |
+		MISC_REGISTERS_RESET_REG_1_RST_PXP;
+
+	not_reset_mask2 =
+		MISC_REGISTERS_RESET_REG_2_RST_PCI_MDIO |
+		MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE |
+		MISC_REGISTERS_RESET_REG_2_RST_EMAC1_HARD_CORE |
+		MISC_REGISTERS_RESET_REG_2_RST_MISC_CORE |
+		MISC_REGISTERS_RESET_REG_2_RST_RBCN |
+		MISC_REGISTERS_RESET_REG_2_RST_GRC  |
+		MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_REG_HARD_CORE |
+		MISC_REGISTERS_RESET_REG_2_RST_MCP_N_HARD_CORE_RST_B |
+		MISC_REGISTERS_RESET_REG_2_RST_ATC |
+		MISC_REGISTERS_RESET_REG_2_PGLC;
+
+	/*
+	 * Keep the following blocks in reset:
+	 *  - all xxMACs are handled by the bnx2x_link code.
+	 */
+	stay_reset2 =
+		MISC_REGISTERS_RESET_REG_2_RST_BMAC0 |
+		MISC_REGISTERS_RESET_REG_2_RST_BMAC1 |
+		MISC_REGISTERS_RESET_REG_2_RST_EMAC0 |
+		MISC_REGISTERS_RESET_REG_2_RST_EMAC1 |
+		MISC_REGISTERS_RESET_REG_2_UMAC0 |
+		MISC_REGISTERS_RESET_REG_2_UMAC1 |
+		MISC_REGISTERS_RESET_REG_2_XMAC |
+		MISC_REGISTERS_RESET_REG_2_XMAC_SOFT;
+
+	/* Full reset masks according to the chip */
+	reset_mask1 = 0xffffffff;
+
+	if (CHIP_IS_E1(bp))
+		reset_mask2 = 0xffff;
+	else if (CHIP_IS_E1H(bp))
+		reset_mask2 = 0x1ffff;
+	else if (CHIP_IS_E2(bp))
+		reset_mask2 = 0xfffff;
+	else /* CHIP_IS_E3 */
+		reset_mask2 = 0x3ffffff;
+
+	/* Don't reset global blocks unless we need to */
+	if (!global)
+		reset_mask2 &= ~global_bits2;
+
+	/*
+	 * In case of attention in the QM, we need to reset PXP
+	 * (MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR) before QM
+	 * because otherwise QM reset would release 'close the gates' shortly
+	 * before resetting the PXP, then the PSWRQ would send a write
+	 * request to PGLUE. Then when PXP is reset, PGLUE would try to
+	 * read the payload data from PSWWR, but PSWWR would not
+	 * respond. The write queue in PGLUE would stuck, dmae commands
+	 * would not return. Therefore it's important to reset the second
+	 * reset register (containing the
+	 * MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR bit) before the
+	 * first one (containing the MISC_REGISTERS_RESET_REG_1_RST_QM
+	 * bit).
+	 */
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
+	       reset_mask2 & (~not_reset_mask2));
+
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
+	       reset_mask1 & (~not_reset_mask1));
+
+	barrier();
+	mmiowb();
+
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
+	       reset_mask2 & (~stay_reset2));
+
+	barrier();
+	mmiowb();
+
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, reset_mask1);
+	mmiowb();
+}
+
+/**
+ * bnx2x_er_poll_igu_vq - poll for pending writes bit.
+ * It should get cleared in no more than 1s.
+ *
+ * @bp:	driver handle
+ *
+ * It should get cleared in no more than 1s. Returns 0 if
+ * pending writes bit gets cleared.
+ */
+static int bnx2x_er_poll_igu_vq(struct bnx2x *bp)
+{
+	u32 cnt = 1000;
+	u32 pend_bits = 0;
+
+	do {
+		pend_bits  = REG_RD(bp, IGU_REG_PENDING_BITS_STATUS);
+
+		if (pend_bits == 0)
+			break;
+
+		usleep_range(1000, 1000);
+	} while (cnt-- > 0);
+
+	if (cnt <= 0) {
+		BNX2X_ERR("Still pending IGU requests pend_bits=%x!\n",
+			  pend_bits);
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static int bnx2x_process_kill(struct bnx2x *bp, bool global)
+{
+	int cnt = 1000;
+	u32 val = 0;
+	u32 sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1, pgl_exp_rom2;
+
+
+	/* Empty the Tetris buffer, wait for 1s */
+	do {
+		sr_cnt  = REG_RD(bp, PXP2_REG_RD_SR_CNT);
+		blk_cnt = REG_RD(bp, PXP2_REG_RD_BLK_CNT);
+		port_is_idle_0 = REG_RD(bp, PXP2_REG_RD_PORT_IS_IDLE_0);
+		port_is_idle_1 = REG_RD(bp, PXP2_REG_RD_PORT_IS_IDLE_1);
+		pgl_exp_rom2 = REG_RD(bp, PXP2_REG_PGL_EXP_ROM2);
+		if ((sr_cnt == 0x7e) && (blk_cnt == 0xa0) &&
+		    ((port_is_idle_0 & 0x1) == 0x1) &&
+		    ((port_is_idle_1 & 0x1) == 0x1) &&
+		    (pgl_exp_rom2 == 0xffffffff))
+			break;
+		usleep_range(1000, 1000);
+	} while (cnt-- > 0);
+
+	if (cnt <= 0) {
+		DP(NETIF_MSG_HW, "Tetris buffer didn't get empty or there"
+			  " are still"
+			  " outstanding read requests after 1s!\n");
+		DP(NETIF_MSG_HW, "sr_cnt=0x%08x, blk_cnt=0x%08x,"
+			  " port_is_idle_0=0x%08x,"
+			  " port_is_idle_1=0x%08x, pgl_exp_rom2=0x%08x\n",
+			  sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1,
+			  pgl_exp_rom2);
+		return -EAGAIN;
+	}
+
+	barrier();
+
+	/* Close gates #2, #3 and #4 */
+	bnx2x_set_234_gates(bp, true);
+
+	/* Poll for IGU VQs for 57712 and newer chips */
+	if (!CHIP_IS_E1x(bp) && bnx2x_er_poll_igu_vq(bp))
+		return -EAGAIN;
+
+
+	/* TBD: Indicate that "process kill" is in progress to MCP */
+
+	/* Clear "unprepared" bit */
+	REG_WR(bp, MISC_REG_UNPREPARED, 0);
+	barrier();
+
+	/* Make sure all is written to the chip before the reset */
+	mmiowb();
+
+	/* Wait for 1ms to empty GLUE and PCI-E core queues,
+	 * PSWHST, GRC and PSWRD Tetris buffer.
+	 */
+	usleep_range(1000, 1000);
+
+	/* Prepare to chip reset: */
+	/* MCP */
+	if (global)
+		bnx2x_reset_mcp_prep(bp, &val);
+
+	/* PXP */
+	bnx2x_pxp_prep(bp);
+	barrier();
+
+	/* reset the chip */
+	bnx2x_process_kill_chip_reset(bp, global);
+	barrier();
+
+	/* Recover after reset: */
+	/* MCP */
+	if (global && bnx2x_reset_mcp_comp(bp, val))
+		return -EAGAIN;
+
+	/* TBD: Add resetting the NO_MCP mode DB here */
+
+	/* PXP */
+	bnx2x_pxp_prep(bp);
+
+	/* Open the gates #2, #3 and #4 */
+	bnx2x_set_234_gates(bp, false);
+
+	/* TBD: IGU/AEU preparation bring back the AEU/IGU to a
+	 * reset state, re-enable attentions. */
+
+	return 0;
+}
+
+int bnx2x_leader_reset(struct bnx2x *bp)
+{
+	int rc = 0;
+	bool global = bnx2x_reset_is_global(bp);
+
+	/* Try to recover after the failure */
+	if (bnx2x_process_kill(bp, global)) {
+		netdev_err(bp->dev, "Something bad had happen on engine %d! "
+				    "Aii!\n", BP_PATH(bp));
+		rc = -EAGAIN;
+		goto exit_leader_reset;
+	}
+
+	/*
+	 * Clear RESET_IN_PROGRES and RESET_GLOBAL bits and update the driver
+	 * state.
+	 */
+	bnx2x_set_reset_done(bp);
+	if (global)
+		bnx2x_clear_reset_global(bp);
+
+exit_leader_reset:
+	bp->is_leader = 0;
+	bnx2x_release_leader_lock(bp);
+	smp_mb();
+	return rc;
+}
+
+static inline void bnx2x_recovery_failed(struct bnx2x *bp)
+{
+	netdev_err(bp->dev, "Recovery has failed. Power cycle is needed.\n");
+
+	/* Disconnect this device */
+	netif_device_detach(bp->dev);
+
+	/*
+	 * Block ifup for all function on this engine until "process kill"
+	 * or power cycle.
+	 */
+	bnx2x_set_reset_in_progress(bp);
+
+	/* Shut down the power */
+	bnx2x_set_power_state(bp, PCI_D3hot);
+
+	bp->recovery_state = BNX2X_RECOVERY_FAILED;
+
+	smp_mb();
+}
+
+/*
+ * Assumption: runs under rtnl lock. This together with the fact
+ * that it's called only from bnx2x_sp_rtnl() ensure that it
+ * will never be called when netif_running(bp->dev) is false.
+ */
+static void bnx2x_parity_recover(struct bnx2x *bp)
+{
+	bool global = false;
+
+	DP(NETIF_MSG_HW, "Handling parity\n");
+	while (1) {
+		switch (bp->recovery_state) {
+		case BNX2X_RECOVERY_INIT:
+			DP(NETIF_MSG_HW, "State is BNX2X_RECOVERY_INIT\n");
+			bnx2x_chk_parity_attn(bp, &global, false);
+
+			/* Try to get a LEADER_LOCK HW lock */
+			if (bnx2x_trylock_leader_lock(bp)) {
+				bnx2x_set_reset_in_progress(bp);
+				/*
+				 * Check if there is a global attention and if
+				 * there was a global attention, set the global
+				 * reset bit.
+				 */
+
+				if (global)
+					bnx2x_set_reset_global(bp);
+
+				bp->is_leader = 1;
+			}
+
+			/* Stop the driver */
+			/* If interface has been removed - break */
+			if (bnx2x_nic_unload(bp, UNLOAD_RECOVERY))
+				return;
+
+			bp->recovery_state = BNX2X_RECOVERY_WAIT;
+
+			/*
+			 * Reset MCP command sequence number and MCP mail box
+			 * sequence as we are going to reset the MCP.
+			 */
+			if (global) {
+				bp->fw_seq = 0;
+				bp->fw_drv_pulse_wr_seq = 0;
+			}
+
+			/* Ensure "is_leader", MCP command sequence and
+			 * "recovery_state" update values are seen on other
+			 * CPUs.
+			 */
+			smp_mb();
+			break;
+
+		case BNX2X_RECOVERY_WAIT:
+			DP(NETIF_MSG_HW, "State is BNX2X_RECOVERY_WAIT\n");
+			if (bp->is_leader) {
+				int other_engine = BP_PATH(bp) ? 0 : 1;
+				u32 other_load_counter =
+					bnx2x_get_load_cnt(bp, other_engine);
+				u32 load_counter =
+					bnx2x_get_load_cnt(bp, BP_PATH(bp));
+				global = bnx2x_reset_is_global(bp);
+
+				/*
+				 * In case of a parity in a global block, let
+				 * the first leader that performs a
+				 * leader_reset() reset the global blocks in
+				 * order to clear global attentions. Otherwise
+				 * the the gates will remain closed for that
+				 * engine.
+				 */
+				if (load_counter ||
+				    (global && other_load_counter)) {
+					/* Wait until all other functions get
+					 * down.
+					 */
+					schedule_delayed_work(&bp->sp_rtnl_task,
+								HZ/10);
+					return;
+				} else {
+					/* If all other functions got down -
+					 * try to bring the chip back to
+					 * normal. In any case it's an exit
+					 * point for a leader.
+					 */
+					if (bnx2x_leader_reset(bp)) {
+						bnx2x_recovery_failed(bp);
+						return;
+					}
+
+					/* If we are here, means that the
+					 * leader has succeeded and doesn't
+					 * want to be a leader any more. Try
+					 * to continue as a none-leader.
+					 */
+					break;
+				}
+			} else { /* non-leader */
+				if (!bnx2x_reset_is_done(bp, BP_PATH(bp))) {
+					/* Try to get a LEADER_LOCK HW lock as
+					 * long as a former leader may have
+					 * been unloaded by the user or
+					 * released a leadership by another
+					 * reason.
+					 */
+					if (bnx2x_trylock_leader_lock(bp)) {
+						/* I'm a leader now! Restart a
+						 * switch case.
+						 */
+						bp->is_leader = 1;
+						break;
+					}
+
+					schedule_delayed_work(&bp->sp_rtnl_task,
+								HZ/10);
+					return;
+
+				} else {
+					/*
+					 * If there was a global attention, wait
+					 * for it to be cleared.
+					 */
+					if (bnx2x_reset_is_global(bp)) {
+						schedule_delayed_work(
+							&bp->sp_rtnl_task,
+							HZ/10);
+						return;
+					}
+
+					if (bnx2x_nic_load(bp, LOAD_NORMAL))
+						bnx2x_recovery_failed(bp);
+					else {
+						bp->recovery_state =
+							BNX2X_RECOVERY_DONE;
+						smp_mb();
+					}
+
+					return;
+				}
+			}
+		default:
+			return;
+		}
+	}
+}
+
+/* bnx2x_nic_unload() flushes the bnx2x_wq, thus reset task is
+ * scheduled on a general queue in order to prevent a dead lock.
+ */
+static void bnx2x_sp_rtnl_task(struct work_struct *work)
+{
+	struct bnx2x *bp = container_of(work, struct bnx2x, sp_rtnl_task.work);
+
+	rtnl_lock();
+
+	if (!netif_running(bp->dev))
+		goto sp_rtnl_exit;
+
+	/* if stop on error is defined no recovery flows should be executed */
+#ifdef BNX2X_STOP_ON_ERROR
+	BNX2X_ERR("recovery flow called but STOP_ON_ERROR defined "
+		  "so reset not done to allow debug dump,\n"
+		  "you will need to reboot when done\n");
+	goto sp_rtnl_not_reset;
+#endif
+
+	if (unlikely(bp->recovery_state != BNX2X_RECOVERY_DONE)) {
+		/*
+		 * Clear all pending SP commands as we are going to reset the
+		 * function anyway.
+		 */
+		bp->sp_rtnl_state = 0;
+		smp_mb();
+
+		bnx2x_parity_recover(bp);
+
+		goto sp_rtnl_exit;
+	}
+
+	if (test_and_clear_bit(BNX2X_SP_RTNL_TX_TIMEOUT, &bp->sp_rtnl_state)) {
+		/*
+		 * Clear all pending SP commands as we are going to reset the
+		 * function anyway.
+		 */
+		bp->sp_rtnl_state = 0;
+		smp_mb();
+
+		bnx2x_nic_unload(bp, UNLOAD_NORMAL);
+		bnx2x_nic_load(bp, LOAD_NORMAL);
+
+		goto sp_rtnl_exit;
+	}
+#ifdef BNX2X_STOP_ON_ERROR
+sp_rtnl_not_reset:
+#endif
+	if (test_and_clear_bit(BNX2X_SP_RTNL_SETUP_TC, &bp->sp_rtnl_state))
+		bnx2x_setup_tc(bp->dev, bp->dcbx_port_params.ets.num_of_cos);
+
+sp_rtnl_exit:
+	rtnl_unlock();
+}
+
+/* end of nic load/unload */
+
+static void bnx2x_period_task(struct work_struct *work)
+{
+	struct bnx2x *bp = container_of(work, struct bnx2x, period_task.work);
+
+	if (!netif_running(bp->dev))
+		goto period_task_exit;
+
+	if (CHIP_REV_IS_SLOW(bp)) {
+		BNX2X_ERR("period task called on emulation, ignoring\n");
+		goto period_task_exit;
+	}
+
+	bnx2x_acquire_phy_lock(bp);
+	/*
+	 * The barrier is needed to ensure the ordering between the writing to
+	 * the bp->port.pmf in the bnx2x_nic_load() or bnx2x_pmf_update() and
+	 * the reading here.
+	 */
+	smp_mb();
+	if (bp->port.pmf) {
+		bnx2x_period_func(&bp->link_params, &bp->link_vars);
+
+		/* Re-queue task in 1 sec */
+		queue_delayed_work(bnx2x_wq, &bp->period_task, 1*HZ);
+	}
+
+	bnx2x_release_phy_lock(bp);
+period_task_exit:
+	return;
+}
+
+/*
+ * Init service functions
+ */
+
+static u32 bnx2x_get_pretend_reg(struct bnx2x *bp)
+{
+	u32 base = PXP2_REG_PGL_PRETEND_FUNC_F0;
+	u32 stride = PXP2_REG_PGL_PRETEND_FUNC_F1 - base;
+	return base + (BP_ABS_FUNC(bp)) * stride;
+}
+
+static void bnx2x_undi_int_disable_e1h(struct bnx2x *bp)
+{
+	u32 reg = bnx2x_get_pretend_reg(bp);
+
+	/* Flush all outstanding writes */
+	mmiowb();
+
+	/* Pretend to be function 0 */
+	REG_WR(bp, reg, 0);
+	REG_RD(bp, reg);	/* Flush the GRC transaction (in the chip) */
+
+	/* From now we are in the "like-E1" mode */
+	bnx2x_int_disable(bp);
+
+	/* Flush all outstanding writes */
+	mmiowb();
+
+	/* Restore the original function */
+	REG_WR(bp, reg, BP_ABS_FUNC(bp));
+	REG_RD(bp, reg);
+}
+
+static inline void bnx2x_undi_int_disable(struct bnx2x *bp)
+{
+	if (CHIP_IS_E1(bp))
+		bnx2x_int_disable(bp);
+	else
+		bnx2x_undi_int_disable_e1h(bp);
+}
+
+static void __devinit bnx2x_undi_unload(struct bnx2x *bp)
+{
+	u32 val;
+
+	/* Check if there is any driver already loaded */
+	val = REG_RD(bp, MISC_REG_UNPREPARED);
+	if (val == 0x1) {
+		/* Check if it is the UNDI driver
+		 * UNDI driver initializes CID offset for normal bell to 0x7
+		 */
+		bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
+		val = REG_RD(bp, DORQ_REG_NORM_CID_OFST);
+		if (val == 0x7) {
+			u32 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
+			/* save our pf_num */
+			int orig_pf_num = bp->pf_num;
+			int port;
+			u32 swap_en, swap_val, value;
+
+			/* clear the UNDI indication */
+			REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0);
+
+			BNX2X_DEV_INFO("UNDI is active! reset device\n");
+
+			/* try unload UNDI on port 0 */
+			bp->pf_num = 0;
+			bp->fw_seq =
+			      (SHMEM_RD(bp, func_mb[bp->pf_num].drv_mb_header) &
+				DRV_MSG_SEQ_NUMBER_MASK);
+			reset_code = bnx2x_fw_command(bp, reset_code, 0);
+
+			/* if UNDI is loaded on the other port */
+			if (reset_code != FW_MSG_CODE_DRV_UNLOAD_COMMON) {
+
+				/* send "DONE" for previous unload */
+				bnx2x_fw_command(bp,
+						 DRV_MSG_CODE_UNLOAD_DONE, 0);
+
+				/* unload UNDI on port 1 */
+				bp->pf_num = 1;
+				bp->fw_seq =
+			      (SHMEM_RD(bp, func_mb[bp->pf_num].drv_mb_header) &
+					DRV_MSG_SEQ_NUMBER_MASK);
+				reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
+
+				bnx2x_fw_command(bp, reset_code, 0);
+			}
+
+			/* now it's safe to release the lock */
+			bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
+
+			bnx2x_undi_int_disable(bp);
+			port = BP_PORT(bp);
+
+			/* close input traffic and wait for it */
+			/* Do not rcv packets to BRB */
+			REG_WR(bp, (port ? NIG_REG_LLH1_BRB1_DRV_MASK :
+					   NIG_REG_LLH0_BRB1_DRV_MASK), 0x0);
+			/* Do not direct rcv packets that are not for MCP to
+			 * the BRB */
+			REG_WR(bp, (port ? NIG_REG_LLH1_BRB1_NOT_MCP :
+					   NIG_REG_LLH0_BRB1_NOT_MCP), 0x0);
+			/* clear AEU */
+			REG_WR(bp, (port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
+					   MISC_REG_AEU_MASK_ATTN_FUNC_0), 0);
+			msleep(10);
+
+			/* save NIG port swap info */
+			swap_val = REG_RD(bp, NIG_REG_PORT_SWAP);
+			swap_en = REG_RD(bp, NIG_REG_STRAP_OVERRIDE);
+			/* reset device */
+			REG_WR(bp,
+			       GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
+			       0xd3ffffff);
+
+			value = 0x1400;
+			if (CHIP_IS_E3(bp)) {
+				value |= MISC_REGISTERS_RESET_REG_2_MSTAT0;
+				value |= MISC_REGISTERS_RESET_REG_2_MSTAT1;
+			}
+
+			REG_WR(bp,
+			       GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
+			       value);
+
+			/* take the NIG out of reset and restore swap values */
+			REG_WR(bp,
+			       GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
+			       MISC_REGISTERS_RESET_REG_1_RST_NIG);
+			REG_WR(bp, NIG_REG_PORT_SWAP, swap_val);
+			REG_WR(bp, NIG_REG_STRAP_OVERRIDE, swap_en);
+
+			/* send unload done to the MCP */
+			bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0);
+
+			/* restore our func and fw_seq */
+			bp->pf_num = orig_pf_num;
+			bp->fw_seq =
+			      (SHMEM_RD(bp, func_mb[bp->pf_num].drv_mb_header) &
+				DRV_MSG_SEQ_NUMBER_MASK);
+		} else
+			bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
+	}
+}
+
+static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp)
+{
+	u32 val, val2, val3, val4, id;
+	u16 pmc;
+
+	/* Get the chip revision id and number. */
+	/* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */
+	val = REG_RD(bp, MISC_REG_CHIP_NUM);
+	id = ((val & 0xffff) << 16);
+	val = REG_RD(bp, MISC_REG_CHIP_REV);
+	id |= ((val & 0xf) << 12);
+	val = REG_RD(bp, MISC_REG_CHIP_METAL);
+	id |= ((val & 0xff) << 4);
+	val = REG_RD(bp, MISC_REG_BOND_ID);
+	id |= (val & 0xf);
+	bp->common.chip_id = id;
+
+	/* Set doorbell size */
+	bp->db_size = (1 << BNX2X_DB_SHIFT);
+
+	if (!CHIP_IS_E1x(bp)) {
+		val = REG_RD(bp, MISC_REG_PORT4MODE_EN_OVWR);
+		if ((val & 1) == 0)
+			val = REG_RD(bp, MISC_REG_PORT4MODE_EN);
+		else
+			val = (val >> 1) & 1;
+		BNX2X_DEV_INFO("chip is in %s\n", val ? "4_PORT_MODE" :
+						       "2_PORT_MODE");
+		bp->common.chip_port_mode = val ? CHIP_4_PORT_MODE :
+						 CHIP_2_PORT_MODE;
+
+		if (CHIP_MODE_IS_4_PORT(bp))
+			bp->pfid = (bp->pf_num >> 1);	/* 0..3 */
+		else
+			bp->pfid = (bp->pf_num & 0x6);	/* 0, 2, 4, 6 */
+	} else {
+		bp->common.chip_port_mode = CHIP_PORT_MODE_NONE; /* N/A */
+		bp->pfid = bp->pf_num;			/* 0..7 */
+	}
+
+	bp->link_params.chip_id = bp->common.chip_id;
+	BNX2X_DEV_INFO("chip ID is 0x%x\n", id);
+
+	val = (REG_RD(bp, 0x2874) & 0x55);
+	if ((bp->common.chip_id & 0x1) ||
+	    (CHIP_IS_E1(bp) && val) || (CHIP_IS_E1H(bp) && (val == 0x55))) {
+		bp->flags |= ONE_PORT_FLAG;
+		BNX2X_DEV_INFO("single port device\n");
+	}
+
+	val = REG_RD(bp, MCP_REG_MCPR_NVM_CFG4);
+	bp->common.flash_size = (BNX2X_NVRAM_1MB_SIZE <<
+				 (val & MCPR_NVM_CFG4_FLASH_SIZE));
+	BNX2X_DEV_INFO("flash_size 0x%x (%d)\n",
+		       bp->common.flash_size, bp->common.flash_size);
+
+	bnx2x_init_shmem(bp);
+
+
+
+	bp->common.shmem2_base = REG_RD(bp, (BP_PATH(bp) ?
+					MISC_REG_GENERIC_CR_1 :
+					MISC_REG_GENERIC_CR_0));
+
+	bp->link_params.shmem_base = bp->common.shmem_base;
+	bp->link_params.shmem2_base = bp->common.shmem2_base;
+	BNX2X_DEV_INFO("shmem offset 0x%x  shmem2 offset 0x%x\n",
+		       bp->common.shmem_base, bp->common.shmem2_base);
+
+	if (!bp->common.shmem_base) {
+		BNX2X_DEV_INFO("MCP not active\n");
+		bp->flags |= NO_MCP_FLAG;
+		return;
+	}
+
+	bp->common.hw_config = SHMEM_RD(bp, dev_info.shared_hw_config.config);
+	BNX2X_DEV_INFO("hw_config 0x%08x\n", bp->common.hw_config);
+
+	bp->link_params.hw_led_mode = ((bp->common.hw_config &
+					SHARED_HW_CFG_LED_MODE_MASK) >>
+				       SHARED_HW_CFG_LED_MODE_SHIFT);
+
+	bp->link_params.feature_config_flags = 0;
+	val = SHMEM_RD(bp, dev_info.shared_feature_config.config);
+	if (val & SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_ENABLED)
+		bp->link_params.feature_config_flags |=
+				FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED;
+	else
+		bp->link_params.feature_config_flags &=
+				~FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED;
+
+	val = SHMEM_RD(bp, dev_info.bc_rev) >> 8;
+	bp->common.bc_ver = val;
+	BNX2X_DEV_INFO("bc_ver %X\n", val);
+	if (val < BNX2X_BC_VER) {
+		/* for now only warn
+		 * later we might need to enforce this */
+		BNX2X_ERR("This driver needs bc_ver %X but found %X, "
+			  "please upgrade BC\n", BNX2X_BC_VER, val);
+	}
+	bp->link_params.feature_config_flags |=
+				(val >= REQ_BC_VER_4_VRFY_FIRST_PHY_OPT_MDL) ?
+				FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY : 0;
+
+	bp->link_params.feature_config_flags |=
+		(val >= REQ_BC_VER_4_VRFY_SPECIFIC_PHY_OPT_MDL) ?
+		FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY : 0;
+
+	bp->link_params.feature_config_flags |=
+		(val >= REQ_BC_VER_4_SFP_TX_DISABLE_SUPPORTED) ?
+		FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED : 0;
+
+	pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_PMC, &pmc);
+	bp->flags |= (pmc & PCI_PM_CAP_PME_D3cold) ? 0 : NO_WOL_FLAG;
+
+	BNX2X_DEV_INFO("%sWoL capable\n",
+		       (bp->flags & NO_WOL_FLAG) ? "not " : "");
+
+	val = SHMEM_RD(bp, dev_info.shared_hw_config.part_num);
+	val2 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[4]);
+	val3 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[8]);
+	val4 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[12]);
+
+	dev_info(&bp->pdev->dev, "part number %X-%X-%X-%X\n",
+		 val, val2, val3, val4);
+}
+
+#define IGU_FID(val)	GET_FIELD((val), IGU_REG_MAPPING_MEMORY_FID)
+#define IGU_VEC(val)	GET_FIELD((val), IGU_REG_MAPPING_MEMORY_VECTOR)
+
+static void __devinit bnx2x_get_igu_cam_info(struct bnx2x *bp)
+{
+	int pfid = BP_FUNC(bp);
+	int vn = BP_E1HVN(bp);
+	int igu_sb_id;
+	u32 val;
+	u8 fid, igu_sb_cnt = 0;
+
+	bp->igu_base_sb = 0xff;
+	if (CHIP_INT_MODE_IS_BC(bp)) {
+		igu_sb_cnt = bp->igu_sb_cnt;
+		bp->igu_base_sb = (CHIP_MODE_IS_4_PORT(bp) ? pfid : vn) *
+			FP_SB_MAX_E1x;
+
+		bp->igu_dsb_id =  E1HVN_MAX * FP_SB_MAX_E1x +
+			(CHIP_MODE_IS_4_PORT(bp) ? pfid : vn);
+
+		return;
+	}
+
+	/* IGU in normal mode - read CAM */
+	for (igu_sb_id = 0; igu_sb_id < IGU_REG_MAPPING_MEMORY_SIZE;
+	     igu_sb_id++) {
+		val = REG_RD(bp, IGU_REG_MAPPING_MEMORY + igu_sb_id * 4);
+		if (!(val & IGU_REG_MAPPING_MEMORY_VALID))
+			continue;
+		fid = IGU_FID(val);
+		if ((fid & IGU_FID_ENCODE_IS_PF)) {
+			if ((fid & IGU_FID_PF_NUM_MASK) != pfid)
+				continue;
+			if (IGU_VEC(val) == 0)
+				/* default status block */
+				bp->igu_dsb_id = igu_sb_id;
+			else {
+				if (bp->igu_base_sb == 0xff)
+					bp->igu_base_sb = igu_sb_id;
+				igu_sb_cnt++;
+			}
+		}
+	}
+
+#ifdef CONFIG_PCI_MSI
+	/*
+	 * It's expected that number of CAM entries for this functions is equal
+	 * to the number evaluated based on the MSI-X table size. We want a
+	 * harsh warning if these values are different!
+	 */
+	WARN_ON(bp->igu_sb_cnt != igu_sb_cnt);
+#endif
+
+	if (igu_sb_cnt == 0)
+		BNX2X_ERR("CAM configuration error\n");
+}
+
+static void __devinit bnx2x_link_settings_supported(struct bnx2x *bp,
+						    u32 switch_cfg)
+{
+	int cfg_size = 0, idx, port = BP_PORT(bp);
+
+	/* Aggregation of supported attributes of all external phys */
+	bp->port.supported[0] = 0;
+	bp->port.supported[1] = 0;
+	switch (bp->link_params.num_phys) {
+	case 1:
+		bp->port.supported[0] = bp->link_params.phy[INT_PHY].supported;
+		cfg_size = 1;
+		break;
+	case 2:
+		bp->port.supported[0] = bp->link_params.phy[EXT_PHY1].supported;
+		cfg_size = 1;
+		break;
+	case 3:
+		if (bp->link_params.multi_phy_config &
+		    PORT_HW_CFG_PHY_SWAPPED_ENABLED) {
+			bp->port.supported[1] =
+				bp->link_params.phy[EXT_PHY1].supported;
+			bp->port.supported[0] =
+				bp->link_params.phy[EXT_PHY2].supported;
+		} else {
+			bp->port.supported[0] =
+				bp->link_params.phy[EXT_PHY1].supported;
+			bp->port.supported[1] =
+				bp->link_params.phy[EXT_PHY2].supported;
+		}
+		cfg_size = 2;
+		break;
+	}
+
+	if (!(bp->port.supported[0] || bp->port.supported[1])) {
+		BNX2X_ERR("NVRAM config error. BAD phy config."
+			  "PHY1 config 0x%x, PHY2 config 0x%x\n",
+			   SHMEM_RD(bp,
+			   dev_info.port_hw_config[port].external_phy_config),
+			   SHMEM_RD(bp,
+			   dev_info.port_hw_config[port].external_phy_config2));
+			return;
+	}
+
+	if (CHIP_IS_E3(bp))
+		bp->port.phy_addr = REG_RD(bp, MISC_REG_WC0_CTRL_PHY_ADDR);
+	else {
+		switch (switch_cfg) {
+		case SWITCH_CFG_1G:
+			bp->port.phy_addr = REG_RD(
+				bp, NIG_REG_SERDES0_CTRL_PHY_ADDR + port*0x10);
+			break;
+		case SWITCH_CFG_10G:
+			bp->port.phy_addr = REG_RD(
+				bp, NIG_REG_XGXS0_CTRL_PHY_ADDR + port*0x18);
+			break;
+		default:
+			BNX2X_ERR("BAD switch_cfg link_config 0x%x\n",
+				  bp->port.link_config[0]);
+			return;
+		}
+	}
+	BNX2X_DEV_INFO("phy_addr 0x%x\n", bp->port.phy_addr);
+	/* mask what we support according to speed_cap_mask per configuration */
+	for (idx = 0; idx < cfg_size; idx++) {
+		if (!(bp->link_params.speed_cap_mask[idx] &
+				PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF))
+			bp->port.supported[idx] &= ~SUPPORTED_10baseT_Half;
+
+		if (!(bp->link_params.speed_cap_mask[idx] &
+				PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL))
+			bp->port.supported[idx] &= ~SUPPORTED_10baseT_Full;
+
+		if (!(bp->link_params.speed_cap_mask[idx] &
+				PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF))
+			bp->port.supported[idx] &= ~SUPPORTED_100baseT_Half;
+
+		if (!(bp->link_params.speed_cap_mask[idx] &
+				PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL))
+			bp->port.supported[idx] &= ~SUPPORTED_100baseT_Full;
+
+		if (!(bp->link_params.speed_cap_mask[idx] &
+					PORT_HW_CFG_SPEED_CAPABILITY_D0_1G))
+			bp->port.supported[idx] &= ~(SUPPORTED_1000baseT_Half |
+						     SUPPORTED_1000baseT_Full);
+
+		if (!(bp->link_params.speed_cap_mask[idx] &
+					PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
+			bp->port.supported[idx] &= ~SUPPORTED_2500baseX_Full;
+
+		if (!(bp->link_params.speed_cap_mask[idx] &
+					PORT_HW_CFG_SPEED_CAPABILITY_D0_10G))
+			bp->port.supported[idx] &= ~SUPPORTED_10000baseT_Full;
+
+	}
+
+	BNX2X_DEV_INFO("supported 0x%x 0x%x\n", bp->port.supported[0],
+		       bp->port.supported[1]);
+}
+
+static void __devinit bnx2x_link_settings_requested(struct bnx2x *bp)
+{
+	u32 link_config, idx, cfg_size = 0;
+	bp->port.advertising[0] = 0;
+	bp->port.advertising[1] = 0;
+	switch (bp->link_params.num_phys) {
+	case 1:
+	case 2:
+		cfg_size = 1;
+		break;
+	case 3:
+		cfg_size = 2;
+		break;
+	}
+	for (idx = 0; idx < cfg_size; idx++) {
+		bp->link_params.req_duplex[idx] = DUPLEX_FULL;
+		link_config = bp->port.link_config[idx];
+		switch (link_config & PORT_FEATURE_LINK_SPEED_MASK) {
+		case PORT_FEATURE_LINK_SPEED_AUTO:
+			if (bp->port.supported[idx] & SUPPORTED_Autoneg) {
+				bp->link_params.req_line_speed[idx] =
+					SPEED_AUTO_NEG;
+				bp->port.advertising[idx] |=
+					bp->port.supported[idx];
+			} else {
+				/* force 10G, no AN */
+				bp->link_params.req_line_speed[idx] =
+					SPEED_10000;
+				bp->port.advertising[idx] |=
+					(ADVERTISED_10000baseT_Full |
+					 ADVERTISED_FIBRE);
+				continue;
+			}
+			break;
+
+		case PORT_FEATURE_LINK_SPEED_10M_FULL:
+			if (bp->port.supported[idx] & SUPPORTED_10baseT_Full) {
+				bp->link_params.req_line_speed[idx] =
+					SPEED_10;
+				bp->port.advertising[idx] |=
+					(ADVERTISED_10baseT_Full |
+					 ADVERTISED_TP);
+			} else {
+				BNX2X_ERR("NVRAM config error. "
+					    "Invalid link_config 0x%x"
+					    "  speed_cap_mask 0x%x\n",
+					    link_config,
+				    bp->link_params.speed_cap_mask[idx]);
+				return;
+			}
+			break;
+
+		case PORT_FEATURE_LINK_SPEED_10M_HALF:
+			if (bp->port.supported[idx] & SUPPORTED_10baseT_Half) {
+				bp->link_params.req_line_speed[idx] =
+					SPEED_10;
+				bp->link_params.req_duplex[idx] =
+					DUPLEX_HALF;
+				bp->port.advertising[idx] |=
+					(ADVERTISED_10baseT_Half |
+					 ADVERTISED_TP);
+			} else {
+				BNX2X_ERR("NVRAM config error. "
+					    "Invalid link_config 0x%x"
+					    "  speed_cap_mask 0x%x\n",
+					    link_config,
+					  bp->link_params.speed_cap_mask[idx]);
+				return;
+			}
+			break;
+
+		case PORT_FEATURE_LINK_SPEED_100M_FULL:
+			if (bp->port.supported[idx] &
+			    SUPPORTED_100baseT_Full) {
+				bp->link_params.req_line_speed[idx] =
+					SPEED_100;
+				bp->port.advertising[idx] |=
+					(ADVERTISED_100baseT_Full |
+					 ADVERTISED_TP);
+			} else {
+				BNX2X_ERR("NVRAM config error. "
+					    "Invalid link_config 0x%x"
+					    "  speed_cap_mask 0x%x\n",
+					    link_config,
+					  bp->link_params.speed_cap_mask[idx]);
+				return;
+			}
+			break;
+
+		case PORT_FEATURE_LINK_SPEED_100M_HALF:
+			if (bp->port.supported[idx] &
+			    SUPPORTED_100baseT_Half) {
+				bp->link_params.req_line_speed[idx] =
+								SPEED_100;
+				bp->link_params.req_duplex[idx] =
+								DUPLEX_HALF;
+				bp->port.advertising[idx] |=
+					(ADVERTISED_100baseT_Half |
+					 ADVERTISED_TP);
+			} else {
+				BNX2X_ERR("NVRAM config error. "
+				    "Invalid link_config 0x%x"
+				    "  speed_cap_mask 0x%x\n",
+				    link_config,
+				    bp->link_params.speed_cap_mask[idx]);
+				return;
+			}
+			break;
+
+		case PORT_FEATURE_LINK_SPEED_1G:
+			if (bp->port.supported[idx] &
+			    SUPPORTED_1000baseT_Full) {
+				bp->link_params.req_line_speed[idx] =
+					SPEED_1000;
+				bp->port.advertising[idx] |=
+					(ADVERTISED_1000baseT_Full |
+					 ADVERTISED_TP);
+			} else {
+				BNX2X_ERR("NVRAM config error. "
+				    "Invalid link_config 0x%x"
+				    "  speed_cap_mask 0x%x\n",
+				    link_config,
+				    bp->link_params.speed_cap_mask[idx]);
+				return;
+			}
+			break;
+
+		case PORT_FEATURE_LINK_SPEED_2_5G:
+			if (bp->port.supported[idx] &
+			    SUPPORTED_2500baseX_Full) {
+				bp->link_params.req_line_speed[idx] =
+					SPEED_2500;
+				bp->port.advertising[idx] |=
+					(ADVERTISED_2500baseX_Full |
+						ADVERTISED_TP);
+			} else {
+				BNX2X_ERR("NVRAM config error. "
+				    "Invalid link_config 0x%x"
+				    "  speed_cap_mask 0x%x\n",
+				    link_config,
+				    bp->link_params.speed_cap_mask[idx]);
+				return;
+			}
+			break;
+
+		case PORT_FEATURE_LINK_SPEED_10G_CX4:
+			if (bp->port.supported[idx] &
+			    SUPPORTED_10000baseT_Full) {
+				bp->link_params.req_line_speed[idx] =
+					SPEED_10000;
+				bp->port.advertising[idx] |=
+					(ADVERTISED_10000baseT_Full |
+						ADVERTISED_FIBRE);
+			} else {
+				BNX2X_ERR("NVRAM config error. "
+				    "Invalid link_config 0x%x"
+				    "  speed_cap_mask 0x%x\n",
+				    link_config,
+				    bp->link_params.speed_cap_mask[idx]);
+				return;
+			}
+			break;
+		case PORT_FEATURE_LINK_SPEED_20G:
+			bp->link_params.req_line_speed[idx] = SPEED_20000;
+
+			break;
+		default:
+			BNX2X_ERR("NVRAM config error. "
+				  "BAD link speed link_config 0x%x\n",
+				  link_config);
+				bp->link_params.req_line_speed[idx] =
+							SPEED_AUTO_NEG;
+				bp->port.advertising[idx] =
+						bp->port.supported[idx];
+			break;
+		}
+
+		bp->link_params.req_flow_ctrl[idx] = (link_config &
+					 PORT_FEATURE_FLOW_CONTROL_MASK);
+		if ((bp->link_params.req_flow_ctrl[idx] ==
+		     BNX2X_FLOW_CTRL_AUTO) &&
+		    !(bp->port.supported[idx] & SUPPORTED_Autoneg)) {
+			bp->link_params.req_flow_ctrl[idx] =
+				BNX2X_FLOW_CTRL_NONE;
+		}
+
+		BNX2X_DEV_INFO("req_line_speed %d  req_duplex %d req_flow_ctrl"
+			       " 0x%x advertising 0x%x\n",
+			       bp->link_params.req_line_speed[idx],
+			       bp->link_params.req_duplex[idx],
+			       bp->link_params.req_flow_ctrl[idx],
+			       bp->port.advertising[idx]);
+	}
+}
+
+static void __devinit bnx2x_set_mac_buf(u8 *mac_buf, u32 mac_lo, u16 mac_hi)
+{
+	mac_hi = cpu_to_be16(mac_hi);
+	mac_lo = cpu_to_be32(mac_lo);
+	memcpy(mac_buf, &mac_hi, sizeof(mac_hi));
+	memcpy(mac_buf + sizeof(mac_hi), &mac_lo, sizeof(mac_lo));
+}
+
+static void __devinit bnx2x_get_port_hwinfo(struct bnx2x *bp)
+{
+	int port = BP_PORT(bp);
+	u32 config;
+	u32 ext_phy_type, ext_phy_config;
+
+	bp->link_params.bp = bp;
+	bp->link_params.port = port;
+
+	bp->link_params.lane_config =
+		SHMEM_RD(bp, dev_info.port_hw_config[port].lane_config);
+
+	bp->link_params.speed_cap_mask[0] =
+		SHMEM_RD(bp,
+			 dev_info.port_hw_config[port].speed_capability_mask);
+	bp->link_params.speed_cap_mask[1] =
+		SHMEM_RD(bp,
+			 dev_info.port_hw_config[port].speed_capability_mask2);
+	bp->port.link_config[0] =
+		SHMEM_RD(bp, dev_info.port_feature_config[port].link_config);
+
+	bp->port.link_config[1] =
+		SHMEM_RD(bp, dev_info.port_feature_config[port].link_config2);
+
+	bp->link_params.multi_phy_config =
+		SHMEM_RD(bp, dev_info.port_hw_config[port].multi_phy_config);
+	/* If the device is capable of WoL, set the default state according
+	 * to the HW
+	 */
+	config = SHMEM_RD(bp, dev_info.port_feature_config[port].config);
+	bp->wol = (!(bp->flags & NO_WOL_FLAG) &&
+		   (config & PORT_FEATURE_WOL_ENABLED));
+
+	BNX2X_DEV_INFO("lane_config 0x%08x  "
+		       "speed_cap_mask0 0x%08x  link_config0 0x%08x\n",
+		       bp->link_params.lane_config,
+		       bp->link_params.speed_cap_mask[0],
+		       bp->port.link_config[0]);
+
+	bp->link_params.switch_cfg = (bp->port.link_config[0] &
+				      PORT_FEATURE_CONNECTED_SWITCH_MASK);
+	bnx2x_phy_probe(&bp->link_params);
+	bnx2x_link_settings_supported(bp, bp->link_params.switch_cfg);
+
+	bnx2x_link_settings_requested(bp);
+
+	/*
+	 * If connected directly, work with the internal PHY, otherwise, work
+	 * with the external PHY
+	 */
+	ext_phy_config =
+		SHMEM_RD(bp,
+			 dev_info.port_hw_config[port].external_phy_config);
+	ext_phy_type = XGXS_EXT_PHY_TYPE(ext_phy_config);
+	if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT)
+		bp->mdio.prtad = bp->port.phy_addr;
+
+	else if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) &&
+		 (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN))
+		bp->mdio.prtad =
+			XGXS_EXT_PHY_ADDR(ext_phy_config);
+
+	/*
+	 * Check if hw lock is required to access MDC/MDIO bus to the PHY(s)
+	 * In MF mode, it is set to cover self test cases
+	 */
+	if (IS_MF(bp))
+		bp->port.need_hw_lock = 1;
+	else
+		bp->port.need_hw_lock = bnx2x_hw_lock_required(bp,
+							bp->common.shmem_base,
+							bp->common.shmem2_base);
+}
+
+#ifdef BCM_CNIC
+static void __devinit bnx2x_get_cnic_info(struct bnx2x *bp)
+{
+	int port = BP_PORT(bp);
+	int func = BP_ABS_FUNC(bp);
+
+	u32 max_iscsi_conn = FW_ENCODE_32BIT_PATTERN ^ SHMEM_RD(bp,
+				drv_lic_key[port].max_iscsi_conn);
+	u32 max_fcoe_conn = FW_ENCODE_32BIT_PATTERN ^ SHMEM_RD(bp,
+				drv_lic_key[port].max_fcoe_conn);
+
+	/* Get the number of maximum allowed iSCSI and FCoE connections */
+	bp->cnic_eth_dev.max_iscsi_conn =
+		(max_iscsi_conn & BNX2X_MAX_ISCSI_INIT_CONN_MASK) >>
+		BNX2X_MAX_ISCSI_INIT_CONN_SHIFT;
+
+	bp->cnic_eth_dev.max_fcoe_conn =
+		(max_fcoe_conn & BNX2X_MAX_FCOE_INIT_CONN_MASK) >>
+		BNX2X_MAX_FCOE_INIT_CONN_SHIFT;
+
+	/* Read the WWN: */
+	if (!IS_MF(bp)) {
+		/* Port info */
+		bp->cnic_eth_dev.fcoe_wwn_port_name_hi =
+			SHMEM_RD(bp,
+				dev_info.port_hw_config[port].
+				 fcoe_wwn_port_name_upper);
+		bp->cnic_eth_dev.fcoe_wwn_port_name_lo =
+			SHMEM_RD(bp,
+				dev_info.port_hw_config[port].
+				 fcoe_wwn_port_name_lower);
+
+		/* Node info */
+		bp->cnic_eth_dev.fcoe_wwn_node_name_hi =
+			SHMEM_RD(bp,
+				dev_info.port_hw_config[port].
+				 fcoe_wwn_node_name_upper);
+		bp->cnic_eth_dev.fcoe_wwn_node_name_lo =
+			SHMEM_RD(bp,
+				dev_info.port_hw_config[port].
+				 fcoe_wwn_node_name_lower);
+	} else if (!IS_MF_SD(bp)) {
+		u32 cfg = MF_CFG_RD(bp, func_ext_config[func].func_cfg);
+
+		/*
+		 * Read the WWN info only if the FCoE feature is enabled for
+		 * this function.
+		 */
+		if (cfg & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD) {
+			/* Port info */
+			bp->cnic_eth_dev.fcoe_wwn_port_name_hi =
+				MF_CFG_RD(bp, func_ext_config[func].
+						fcoe_wwn_port_name_upper);
+			bp->cnic_eth_dev.fcoe_wwn_port_name_lo =
+				MF_CFG_RD(bp, func_ext_config[func].
+						fcoe_wwn_port_name_lower);
+
+			/* Node info */
+			bp->cnic_eth_dev.fcoe_wwn_node_name_hi =
+				MF_CFG_RD(bp, func_ext_config[func].
+						fcoe_wwn_node_name_upper);
+			bp->cnic_eth_dev.fcoe_wwn_node_name_lo =
+				MF_CFG_RD(bp, func_ext_config[func].
+						fcoe_wwn_node_name_lower);
+		}
+	}
+
+	BNX2X_DEV_INFO("max_iscsi_conn 0x%x max_fcoe_conn 0x%x\n",
+		       bp->cnic_eth_dev.max_iscsi_conn,
+		       bp->cnic_eth_dev.max_fcoe_conn);
+
+	/*
+	 * If maximum allowed number of connections is zero -
+	 * disable the feature.
+	 */
+	if (!bp->cnic_eth_dev.max_iscsi_conn)
+		bp->flags |= NO_ISCSI_OOO_FLAG | NO_ISCSI_FLAG;
+
+	if (!bp->cnic_eth_dev.max_fcoe_conn)
+		bp->flags |= NO_FCOE_FLAG;
+}
+#endif
+
+static void __devinit bnx2x_get_mac_hwinfo(struct bnx2x *bp)
+{
+	u32 val, val2;
+	int func = BP_ABS_FUNC(bp);
+	int port = BP_PORT(bp);
+#ifdef BCM_CNIC
+	u8 *iscsi_mac = bp->cnic_eth_dev.iscsi_mac;
+	u8 *fip_mac = bp->fip_mac;
+#endif
+
+	/* Zero primary MAC configuration */
+	memset(bp->dev->dev_addr, 0, ETH_ALEN);
+
+	if (BP_NOMCP(bp)) {
+		BNX2X_ERROR("warning: random MAC workaround active\n");
+		random_ether_addr(bp->dev->dev_addr);
+	} else if (IS_MF(bp)) {
+		val2 = MF_CFG_RD(bp, func_mf_config[func].mac_upper);
+		val = MF_CFG_RD(bp, func_mf_config[func].mac_lower);
+		if ((val2 != FUNC_MF_CFG_UPPERMAC_DEFAULT) &&
+		    (val != FUNC_MF_CFG_LOWERMAC_DEFAULT))
+			bnx2x_set_mac_buf(bp->dev->dev_addr, val, val2);
+
+#ifdef BCM_CNIC
+		/* iSCSI and FCoE NPAR MACs: if there is no either iSCSI or
+		 * FCoE MAC then the appropriate feature should be disabled.
+		 */
+		if (IS_MF_SI(bp)) {
+			u32 cfg = MF_CFG_RD(bp, func_ext_config[func].func_cfg);
+			if (cfg & MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD) {
+				val2 = MF_CFG_RD(bp, func_ext_config[func].
+						     iscsi_mac_addr_upper);
+				val = MF_CFG_RD(bp, func_ext_config[func].
+						    iscsi_mac_addr_lower);
+				bnx2x_set_mac_buf(iscsi_mac, val, val2);
+				BNX2X_DEV_INFO("Read iSCSI MAC: "
+					       BNX2X_MAC_FMT"\n",
+					       BNX2X_MAC_PRN_LIST(iscsi_mac));
+			} else
+				bp->flags |= NO_ISCSI_OOO_FLAG | NO_ISCSI_FLAG;
+
+			if (cfg & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD) {
+				val2 = MF_CFG_RD(bp, func_ext_config[func].
+						     fcoe_mac_addr_upper);
+				val = MF_CFG_RD(bp, func_ext_config[func].
+						    fcoe_mac_addr_lower);
+				bnx2x_set_mac_buf(fip_mac, val, val2);
+				BNX2X_DEV_INFO("Read FCoE L2 MAC to "
+					       BNX2X_MAC_FMT"\n",
+					       BNX2X_MAC_PRN_LIST(fip_mac));
+
+			} else
+				bp->flags |= NO_FCOE_FLAG;
+		}
+#endif
+	} else {
+		/* in SF read MACs from port configuration */
+		val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_upper);
+		val = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_lower);
+		bnx2x_set_mac_buf(bp->dev->dev_addr, val, val2);
+
+#ifdef BCM_CNIC
+		val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].
+				    iscsi_mac_upper);
+		val = SHMEM_RD(bp, dev_info.port_hw_config[port].
+				   iscsi_mac_lower);
+		bnx2x_set_mac_buf(iscsi_mac, val, val2);
+
+		val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].
+				    fcoe_fip_mac_upper);
+		val = SHMEM_RD(bp, dev_info.port_hw_config[port].
+				   fcoe_fip_mac_lower);
+		bnx2x_set_mac_buf(fip_mac, val, val2);
+#endif
+	}
+
+	memcpy(bp->link_params.mac_addr, bp->dev->dev_addr, ETH_ALEN);
+	memcpy(bp->dev->perm_addr, bp->dev->dev_addr, ETH_ALEN);
+
+#ifdef BCM_CNIC
+	/* Set the FCoE MAC in MF_SD mode */
+	if (!CHIP_IS_E1x(bp) && IS_MF_SD(bp))
+		memcpy(fip_mac, bp->dev->dev_addr, ETH_ALEN);
+
+	/* Disable iSCSI if MAC configuration is
+	 * invalid.
+	 */
+	if (!is_valid_ether_addr(iscsi_mac)) {
+		bp->flags |= NO_ISCSI_FLAG;
+		memset(iscsi_mac, 0, ETH_ALEN);
+	}
+
+	/* Disable FCoE if MAC configuration is
+	 * invalid.
+	 */
+	if (!is_valid_ether_addr(fip_mac)) {
+		bp->flags |= NO_FCOE_FLAG;
+		memset(bp->fip_mac, 0, ETH_ALEN);
+	}
+#endif
+
+	if (!is_valid_ether_addr(bp->dev->dev_addr))
+		dev_err(&bp->pdev->dev,
+			"bad Ethernet MAC address configuration: "
+			BNX2X_MAC_FMT", change it manually before bringing up "
+			"the appropriate network interface\n",
+			BNX2X_MAC_PRN_LIST(bp->dev->dev_addr));
+}
+
+static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
+{
+	int /*abs*/func = BP_ABS_FUNC(bp);
+	int vn;
+	u32 val = 0;
+	int rc = 0;
+
+	bnx2x_get_common_hwinfo(bp);
+
+	/*
+	 * initialize IGU parameters
+	 */
+	if (CHIP_IS_E1x(bp)) {
+		bp->common.int_block = INT_BLOCK_HC;
+
+		bp->igu_dsb_id = DEF_SB_IGU_ID;
+		bp->igu_base_sb = 0;
+	} else {
+		bp->common.int_block = INT_BLOCK_IGU;
+		val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION);
+
+		if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) {
+			int tout = 5000;
+
+			BNX2X_DEV_INFO("FORCING Normal Mode\n");
+
+			val &= ~(IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN);
+			REG_WR(bp, IGU_REG_BLOCK_CONFIGURATION, val);
+			REG_WR(bp, IGU_REG_RESET_MEMORIES, 0x7f);
+
+			while (tout && REG_RD(bp, IGU_REG_RESET_MEMORIES)) {
+				tout--;
+				usleep_range(1000, 1000);
+			}
+
+			if (REG_RD(bp, IGU_REG_RESET_MEMORIES)) {
+				dev_err(&bp->pdev->dev,
+					"FORCING Normal Mode failed!!!\n");
+				return -EPERM;
+			}
+		}
+
+		if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) {
+			BNX2X_DEV_INFO("IGU Backward Compatible Mode\n");
+			bp->common.int_block |= INT_BLOCK_MODE_BW_COMP;
+		} else
+			BNX2X_DEV_INFO("IGU Normal Mode\n");
+
+		bnx2x_get_igu_cam_info(bp);
+
+	}
+
+	/*
+	 * set base FW non-default (fast path) status block id, this value is
+	 * used to initialize the fw_sb_id saved on the fp/queue structure to
+	 * determine the id used by the FW.
+	 */
+	if (CHIP_IS_E1x(bp))
+		bp->base_fw_ndsb = BP_PORT(bp) * FP_SB_MAX_E1x + BP_L_ID(bp);
+	else /*
+	      * 57712 - we currently use one FW SB per IGU SB (Rx and Tx of
+	      * the same queue are indicated on the same IGU SB). So we prefer
+	      * FW and IGU SBs to be the same value.
+	      */
+		bp->base_fw_ndsb = bp->igu_base_sb;
+
+	BNX2X_DEV_INFO("igu_dsb_id %d  igu_base_sb %d  igu_sb_cnt %d\n"
+		       "base_fw_ndsb %d\n", bp->igu_dsb_id, bp->igu_base_sb,
+		       bp->igu_sb_cnt, bp->base_fw_ndsb);
+
+	/*
+	 * Initialize MF configuration
+	 */
+
+	bp->mf_ov = 0;
+	bp->mf_mode = 0;
+	vn = BP_E1HVN(bp);
+
+	if (!CHIP_IS_E1(bp) && !BP_NOMCP(bp)) {
+		BNX2X_DEV_INFO("shmem2base 0x%x, size %d, mfcfg offset %d\n",
+			       bp->common.shmem2_base, SHMEM2_RD(bp, size),
+			      (u32)offsetof(struct shmem2_region, mf_cfg_addr));
+
+		if (SHMEM2_HAS(bp, mf_cfg_addr))
+			bp->common.mf_cfg_base = SHMEM2_RD(bp, mf_cfg_addr);
+		else
+			bp->common.mf_cfg_base = bp->common.shmem_base +
+				offsetof(struct shmem_region, func_mb) +
+				E1H_FUNC_MAX * sizeof(struct drv_func_mb);
+		/*
+		 * get mf configuration:
+		 * 1. existence of MF configuration
+		 * 2. MAC address must be legal (check only upper bytes)
+		 *    for  Switch-Independent mode;
+		 *    OVLAN must be legal for Switch-Dependent mode
+		 * 3. SF_MODE configures specific MF mode
+		 */
+		if (bp->common.mf_cfg_base != SHMEM_MF_CFG_ADDR_NONE) {
+			/* get mf configuration */
+			val = SHMEM_RD(bp,
+				       dev_info.shared_feature_config.config);
+			val &= SHARED_FEAT_CFG_FORCE_SF_MODE_MASK;
+
+			switch (val) {
+			case SHARED_FEAT_CFG_FORCE_SF_MODE_SWITCH_INDEPT:
+				val = MF_CFG_RD(bp, func_mf_config[func].
+						mac_upper);
+				/* check for legal mac (upper bytes)*/
+				if (val != 0xffff) {
+					bp->mf_mode = MULTI_FUNCTION_SI;
+					bp->mf_config[vn] = MF_CFG_RD(bp,
+						   func_mf_config[func].config);
+				} else
+					BNX2X_DEV_INFO("illegal MAC address "
+						       "for SI\n");
+				break;
+			case SHARED_FEAT_CFG_FORCE_SF_MODE_MF_ALLOWED:
+				/* get OV configuration */
+				val = MF_CFG_RD(bp,
+					func_mf_config[FUNC_0].e1hov_tag);
+				val &= FUNC_MF_CFG_E1HOV_TAG_MASK;
+
+				if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) {
+					bp->mf_mode = MULTI_FUNCTION_SD;
+					bp->mf_config[vn] = MF_CFG_RD(bp,
+						func_mf_config[func].config);
+				} else
+					BNX2X_DEV_INFO("illegal OV for SD\n");
+				break;
+			default:
+				/* Unknown configuration: reset mf_config */
+				bp->mf_config[vn] = 0;
+				BNX2X_DEV_INFO("unkown MF mode 0x%x\n", val);
+			}
+		}
+
+		BNX2X_DEV_INFO("%s function mode\n",
+			       IS_MF(bp) ? "multi" : "single");
+
+		switch (bp->mf_mode) {
+		case MULTI_FUNCTION_SD:
+			val = MF_CFG_RD(bp, func_mf_config[func].e1hov_tag) &
+			      FUNC_MF_CFG_E1HOV_TAG_MASK;
+			if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) {
+				bp->mf_ov = val;
+				bp->path_has_ovlan = true;
+
+				BNX2X_DEV_INFO("MF OV for func %d is %d "
+					       "(0x%04x)\n", func, bp->mf_ov,
+					       bp->mf_ov);
+			} else {
+				dev_err(&bp->pdev->dev,
+					"No valid MF OV for func %d, "
+					"aborting\n", func);
+				return -EPERM;
+			}
+			break;
+		case MULTI_FUNCTION_SI:
+			BNX2X_DEV_INFO("func %d is in MF "
+				       "switch-independent mode\n", func);
+			break;
+		default:
+			if (vn) {
+				dev_err(&bp->pdev->dev,
+					"VN %d is in a single function mode, "
+					"aborting\n", vn);
+				return -EPERM;
+			}
+			break;
+		}
+
+		/* check if other port on the path needs ovlan:
+		 * Since MF configuration is shared between ports
+		 * Possible mixed modes are only
+		 * {SF, SI} {SF, SD} {SD, SF} {SI, SF}
+		 */
+		if (CHIP_MODE_IS_4_PORT(bp) &&
+		    !bp->path_has_ovlan &&
+		    !IS_MF(bp) &&
+		    bp->common.mf_cfg_base != SHMEM_MF_CFG_ADDR_NONE) {
+			u8 other_port = !BP_PORT(bp);
+			u8 other_func = BP_PATH(bp) + 2*other_port;
+			val = MF_CFG_RD(bp,
+					func_mf_config[other_func].e1hov_tag);
+			if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT)
+				bp->path_has_ovlan = true;
+		}
+	}
+
+	/* adjust igu_sb_cnt to MF for E1x */
+	if (CHIP_IS_E1x(bp) && IS_MF(bp))
+		bp->igu_sb_cnt /= E1HVN_MAX;
+
+	/* port info */
+	bnx2x_get_port_hwinfo(bp);
+
+	if (!BP_NOMCP(bp)) {
+		bp->fw_seq =
+			(SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) &
+			 DRV_MSG_SEQ_NUMBER_MASK);
+		BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq);
+	}
+
+	/* Get MAC addresses */
+	bnx2x_get_mac_hwinfo(bp);
+
+#ifdef BCM_CNIC
+	bnx2x_get_cnic_info(bp);
+#endif
+
+	/* Get current FW pulse sequence */
+	if (!BP_NOMCP(bp)) {
+		int mb_idx = BP_FW_MB_IDX(bp);
+
+		bp->fw_drv_pulse_wr_seq =
+				(SHMEM_RD(bp, func_mb[mb_idx].drv_pulse_mb) &
+				 DRV_PULSE_SEQ_MASK);
+		BNX2X_DEV_INFO("drv_pulse 0x%x\n", bp->fw_drv_pulse_wr_seq);
+	}
+
+	return rc;
+}
+
+static void __devinit bnx2x_read_fwinfo(struct bnx2x *bp)
+{
+	int cnt, i, block_end, rodi;
+	char vpd_data[BNX2X_VPD_LEN+1];
+	char str_id_reg[VENDOR_ID_LEN+1];
+	char str_id_cap[VENDOR_ID_LEN+1];
+	u8 len;
+
+	cnt = pci_read_vpd(bp->pdev, 0, BNX2X_VPD_LEN, vpd_data);
+	memset(bp->fw_ver, 0, sizeof(bp->fw_ver));
+
+	if (cnt < BNX2X_VPD_LEN)
+		goto out_not_found;
+
+	i = pci_vpd_find_tag(vpd_data, 0, BNX2X_VPD_LEN,
+			     PCI_VPD_LRDT_RO_DATA);
+	if (i < 0)
+		goto out_not_found;
+
+
+	block_end = i + PCI_VPD_LRDT_TAG_SIZE +
+		    pci_vpd_lrdt_size(&vpd_data[i]);
+
+	i += PCI_VPD_LRDT_TAG_SIZE;
+
+	if (block_end > BNX2X_VPD_LEN)
+		goto out_not_found;
+
+	rodi = pci_vpd_find_info_keyword(vpd_data, i, block_end,
+				   PCI_VPD_RO_KEYWORD_MFR_ID);
+	if (rodi < 0)
+		goto out_not_found;
+
+	len = pci_vpd_info_field_size(&vpd_data[rodi]);
+
+	if (len != VENDOR_ID_LEN)
+		goto out_not_found;
+
+	rodi += PCI_VPD_INFO_FLD_HDR_SIZE;
+
+	/* vendor specific info */
+	snprintf(str_id_reg, VENDOR_ID_LEN + 1, "%04x", PCI_VENDOR_ID_DELL);
+	snprintf(str_id_cap, VENDOR_ID_LEN + 1, "%04X", PCI_VENDOR_ID_DELL);
+	if (!strncmp(str_id_reg, &vpd_data[rodi], VENDOR_ID_LEN) ||
+	    !strncmp(str_id_cap, &vpd_data[rodi], VENDOR_ID_LEN)) {
+
+		rodi = pci_vpd_find_info_keyword(vpd_data, i, block_end,
+						PCI_VPD_RO_KEYWORD_VENDOR0);
+		if (rodi >= 0) {
+			len = pci_vpd_info_field_size(&vpd_data[rodi]);
+
+			rodi += PCI_VPD_INFO_FLD_HDR_SIZE;
+
+			if (len < 32 && (len + rodi) <= BNX2X_VPD_LEN) {
+				memcpy(bp->fw_ver, &vpd_data[rodi], len);
+				bp->fw_ver[len] = ' ';
+			}
+		}
+		return;
+	}
+out_not_found:
+	return;
+}
+
+static void __devinit bnx2x_set_modes_bitmap(struct bnx2x *bp)
+{
+	u32 flags = 0;
+
+	if (CHIP_REV_IS_FPGA(bp))
+		SET_FLAGS(flags, MODE_FPGA);
+	else if (CHIP_REV_IS_EMUL(bp))
+		SET_FLAGS(flags, MODE_EMUL);
+	else
+		SET_FLAGS(flags, MODE_ASIC);
+
+	if (CHIP_MODE_IS_4_PORT(bp))
+		SET_FLAGS(flags, MODE_PORT4);
+	else
+		SET_FLAGS(flags, MODE_PORT2);
+
+	if (CHIP_IS_E2(bp))
+		SET_FLAGS(flags, MODE_E2);
+	else if (CHIP_IS_E3(bp)) {
+		SET_FLAGS(flags, MODE_E3);
+		if (CHIP_REV(bp) == CHIP_REV_Ax)
+			SET_FLAGS(flags, MODE_E3_A0);
+		else /*if (CHIP_REV(bp) == CHIP_REV_Bx)*/
+			SET_FLAGS(flags, MODE_E3_B0 | MODE_COS3);
+	}
+
+	if (IS_MF(bp)) {
+		SET_FLAGS(flags, MODE_MF);
+		switch (bp->mf_mode) {
+		case MULTI_FUNCTION_SD:
+			SET_FLAGS(flags, MODE_MF_SD);
+			break;
+		case MULTI_FUNCTION_SI:
+			SET_FLAGS(flags, MODE_MF_SI);
+			break;
+		}
+	} else
+		SET_FLAGS(flags, MODE_SF);
+
+#if defined(__LITTLE_ENDIAN)
+	SET_FLAGS(flags, MODE_LITTLE_ENDIAN);
+#else /*(__BIG_ENDIAN)*/
+	SET_FLAGS(flags, MODE_BIG_ENDIAN);
+#endif
+	INIT_MODE_FLAGS(bp) = flags;
+}
+
+static int __devinit bnx2x_init_bp(struct bnx2x *bp)
+{
+	int func;
+	int timer_interval;
+	int rc;
+
+	mutex_init(&bp->port.phy_mutex);
+	mutex_init(&bp->fw_mb_mutex);
+	spin_lock_init(&bp->stats_lock);
+#ifdef BCM_CNIC
+	mutex_init(&bp->cnic_mutex);
+#endif
+
+	INIT_DELAYED_WORK(&bp->sp_task, bnx2x_sp_task);
+	INIT_DELAYED_WORK(&bp->sp_rtnl_task, bnx2x_sp_rtnl_task);
+	INIT_DELAYED_WORK(&bp->period_task, bnx2x_period_task);
+	rc = bnx2x_get_hwinfo(bp);
+	if (rc)
+		return rc;
+
+	bnx2x_set_modes_bitmap(bp);
+
+	rc = bnx2x_alloc_mem_bp(bp);
+	if (rc)
+		return rc;
+
+	bnx2x_read_fwinfo(bp);
+
+	func = BP_FUNC(bp);
+
+	/* need to reset chip if undi was active */
+	if (!BP_NOMCP(bp))
+		bnx2x_undi_unload(bp);
+
+	if (CHIP_REV_IS_FPGA(bp))
+		dev_err(&bp->pdev->dev, "FPGA detected\n");
+
+	if (BP_NOMCP(bp) && (func == 0))
+		dev_err(&bp->pdev->dev, "MCP disabled, "
+					"must load devices in order!\n");
+
+	bp->multi_mode = multi_mode;
+
+	/* Set TPA flags */
+	if (disable_tpa) {
+		bp->flags &= ~TPA_ENABLE_FLAG;
+		bp->dev->features &= ~NETIF_F_LRO;
+	} else {
+		bp->flags |= TPA_ENABLE_FLAG;
+		bp->dev->features |= NETIF_F_LRO;
+	}
+	bp->disable_tpa = disable_tpa;
+
+	if (CHIP_IS_E1(bp))
+		bp->dropless_fc = 0;
+	else
+		bp->dropless_fc = dropless_fc;
+
+	bp->mrrs = mrrs;
+
+	bp->tx_ring_size = MAX_TX_AVAIL;
+
+	/* make sure that the numbers are in the right granularity */
+	bp->tx_ticks = (50 / BNX2X_BTR) * BNX2X_BTR;
+	bp->rx_ticks = (25 / BNX2X_BTR) * BNX2X_BTR;
+
+	timer_interval = (CHIP_REV_IS_SLOW(bp) ? 5*HZ : HZ);
+	bp->current_interval = (poll ? poll : timer_interval);
+
+	init_timer(&bp->timer);
+	bp->timer.expires = jiffies + bp->current_interval;
+	bp->timer.data = (unsigned long) bp;
+	bp->timer.function = bnx2x_timer;
+
+	bnx2x_dcbx_set_state(bp, true, BNX2X_DCBX_ENABLED_ON_NEG_ON);
+	bnx2x_dcbx_init_params(bp);
+
+#ifdef BCM_CNIC
+	if (CHIP_IS_E1x(bp))
+		bp->cnic_base_cl_id = FP_SB_MAX_E1x;
+	else
+		bp->cnic_base_cl_id = FP_SB_MAX_E2;
+#endif
+
+	/* multiple tx priority */
+	if (CHIP_IS_E1x(bp))
+		bp->max_cos = BNX2X_MULTI_TX_COS_E1X;
+	if (CHIP_IS_E2(bp) || CHIP_IS_E3A0(bp))
+		bp->max_cos = BNX2X_MULTI_TX_COS_E2_E3A0;
+	if (CHIP_IS_E3B0(bp))
+		bp->max_cos = BNX2X_MULTI_TX_COS_E3B0;
+
+	return rc;
+}
+
+
+/****************************************************************************
+* General service functions
+****************************************************************************/
+
+/*
+ * net_device service functions
+ */
+
+/* called with rtnl_lock */
+static int bnx2x_open(struct net_device *dev)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+	bool global = false;
+	int other_engine = BP_PATH(bp) ? 0 : 1;
+	u32 other_load_counter, load_counter;
+
+	netif_carrier_off(dev);
+
+	bnx2x_set_power_state(bp, PCI_D0);
+
+	other_load_counter = bnx2x_get_load_cnt(bp, other_engine);
+	load_counter = bnx2x_get_load_cnt(bp, BP_PATH(bp));
+
+	/*
+	 * If parity had happen during the unload, then attentions
+	 * and/or RECOVERY_IN_PROGRES may still be set. In this case we
+	 * want the first function loaded on the current engine to
+	 * complete the recovery.
+	 */
+	if (!bnx2x_reset_is_done(bp, BP_PATH(bp)) ||
+	    bnx2x_chk_parity_attn(bp, &global, true))
+		do {
+			/*
+			 * If there are attentions and they are in a global
+			 * blocks, set the GLOBAL_RESET bit regardless whether
+			 * it will be this function that will complete the
+			 * recovery or not.
+			 */
+			if (global)
+				bnx2x_set_reset_global(bp);
+
+			/*
+			 * Only the first function on the current engine should
+			 * try to recover in open. In case of attentions in
+			 * global blocks only the first in the chip should try
+			 * to recover.
+			 */
+			if ((!load_counter &&
+			     (!global || !other_load_counter)) &&
+			    bnx2x_trylock_leader_lock(bp) &&
+			    !bnx2x_leader_reset(bp)) {
+				netdev_info(bp->dev, "Recovered in open\n");
+				break;
+			}
+
+			/* recovery has failed... */
+			bnx2x_set_power_state(bp, PCI_D3hot);
+			bp->recovery_state = BNX2X_RECOVERY_FAILED;
+
+			netdev_err(bp->dev, "Recovery flow hasn't been properly"
+			" completed yet. Try again later. If u still see this"
+			" message after a few retries then power cycle is"
+			" required.\n");
+
+			return -EAGAIN;
+		} while (0);
+
+	bp->recovery_state = BNX2X_RECOVERY_DONE;
+	return bnx2x_nic_load(bp, LOAD_OPEN);
+}
+
+/* called with rtnl_lock */
+static int bnx2x_close(struct net_device *dev)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+
+	/* Unload the driver, release IRQs */
+	bnx2x_nic_unload(bp, UNLOAD_CLOSE);
+
+	/* Power off */
+	bnx2x_set_power_state(bp, PCI_D3hot);
+
+	return 0;
+}
+
+static inline int bnx2x_init_mcast_macs_list(struct bnx2x *bp,
+					 struct bnx2x_mcast_ramrod_params *p)
+{
+	int mc_count = netdev_mc_count(bp->dev);
+	struct bnx2x_mcast_list_elem *mc_mac =
+		kzalloc(sizeof(*mc_mac) * mc_count, GFP_ATOMIC);
+	struct netdev_hw_addr *ha;
+
+	if (!mc_mac)
+		return -ENOMEM;
+
+	INIT_LIST_HEAD(&p->mcast_list);
+
+	netdev_for_each_mc_addr(ha, bp->dev) {
+		mc_mac->mac = bnx2x_mc_addr(ha);
+		list_add_tail(&mc_mac->link, &p->mcast_list);
+		mc_mac++;
+	}
+
+	p->mcast_list_len = mc_count;
+
+	return 0;
+}
+
+static inline void bnx2x_free_mcast_macs_list(
+	struct bnx2x_mcast_ramrod_params *p)
+{
+	struct bnx2x_mcast_list_elem *mc_mac =
+		list_first_entry(&p->mcast_list, struct bnx2x_mcast_list_elem,
+				 link);
+
+	WARN_ON(!mc_mac);
+	kfree(mc_mac);
+}
+
+/**
+ * bnx2x_set_uc_list - configure a new unicast MACs list.
+ *
+ * @bp: driver handle
+ *
+ * We will use zero (0) as a MAC type for these MACs.
+ */
+static inline int bnx2x_set_uc_list(struct bnx2x *bp)
+{
+	int rc;
+	struct net_device *dev = bp->dev;
+	struct netdev_hw_addr *ha;
+	struct bnx2x_vlan_mac_obj *mac_obj = &bp->fp->mac_obj;
+	unsigned long ramrod_flags = 0;
+
+	/* First schedule a cleanup up of old configuration */
+	rc = bnx2x_del_all_macs(bp, mac_obj, BNX2X_UC_LIST_MAC, false);
+	if (rc < 0) {
+		BNX2X_ERR("Failed to schedule DELETE operations: %d\n", rc);
+		return rc;
+	}
+
+	netdev_for_each_uc_addr(ha, dev) {
+		rc = bnx2x_set_mac_one(bp, bnx2x_uc_addr(ha), mac_obj, true,
+				       BNX2X_UC_LIST_MAC, &ramrod_flags);
+		if (rc < 0) {
+			BNX2X_ERR("Failed to schedule ADD operations: %d\n",
+				  rc);
+			return rc;
+		}
+	}
+
+	/* Execute the pending commands */
+	__set_bit(RAMROD_CONT, &ramrod_flags);
+	return bnx2x_set_mac_one(bp, NULL, mac_obj, false /* don't care */,
+				 BNX2X_UC_LIST_MAC, &ramrod_flags);
+}
+
+static inline int bnx2x_set_mc_list(struct bnx2x *bp)
+{
+	struct net_device *dev = bp->dev;
+	struct bnx2x_mcast_ramrod_params rparam = {0};
+	int rc = 0;
+
+	rparam.mcast_obj = &bp->mcast_obj;
+
+	/* first, clear all configured multicast MACs */
+	rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_DEL);
+	if (rc < 0) {
+		BNX2X_ERR("Failed to clear multicast "
+			  "configuration: %d\n", rc);
+		return rc;
+	}
+
+	/* then, configure a new MACs list */
+	if (netdev_mc_count(dev)) {
+		rc = bnx2x_init_mcast_macs_list(bp, &rparam);
+		if (rc) {
+			BNX2X_ERR("Failed to create multicast MACs "
+				  "list: %d\n", rc);
+			return rc;
+		}
+
+		/* Now add the new MACs */
+		rc = bnx2x_config_mcast(bp, &rparam,
+					BNX2X_MCAST_CMD_ADD);
+		if (rc < 0)
+			BNX2X_ERR("Failed to set a new multicast "
+				  "configuration: %d\n", rc);
+
+		bnx2x_free_mcast_macs_list(&rparam);
+	}
+
+	return rc;
+}
+
+
+/* If bp->state is OPEN, should be called with netif_addr_lock_bh() */
+void bnx2x_set_rx_mode(struct net_device *dev)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+	u32 rx_mode = BNX2X_RX_MODE_NORMAL;
+
+	if (bp->state != BNX2X_STATE_OPEN) {
+		DP(NETIF_MSG_IFUP, "state is %x, returning\n", bp->state);
+		return;
+	}
+
+	DP(NETIF_MSG_IFUP, "dev->flags = %x\n", bp->dev->flags);
+
+	if (dev->flags & IFF_PROMISC)
+		rx_mode = BNX2X_RX_MODE_PROMISC;
+	else if ((dev->flags & IFF_ALLMULTI) ||
+		 ((netdev_mc_count(dev) > BNX2X_MAX_MULTICAST) &&
+		  CHIP_IS_E1(bp)))
+		rx_mode = BNX2X_RX_MODE_ALLMULTI;
+	else {
+		/* some multicasts */
+		if (bnx2x_set_mc_list(bp) < 0)
+			rx_mode = BNX2X_RX_MODE_ALLMULTI;
+
+		if (bnx2x_set_uc_list(bp) < 0)
+			rx_mode = BNX2X_RX_MODE_PROMISC;
+	}
+
+	bp->rx_mode = rx_mode;
+
+	/* Schedule the rx_mode command */
+	if (test_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state)) {
+		set_bit(BNX2X_FILTER_RX_MODE_SCHED, &bp->sp_state);
+		return;
+	}
+
+	bnx2x_set_storm_rx_mode(bp);
+}
+
+/* called with rtnl_lock */
+static int bnx2x_mdio_read(struct net_device *netdev, int prtad,
+			   int devad, u16 addr)
+{
+	struct bnx2x *bp = netdev_priv(netdev);
+	u16 value;
+	int rc;
+
+	DP(NETIF_MSG_LINK, "mdio_read: prtad 0x%x, devad 0x%x, addr 0x%x\n",
+	   prtad, devad, addr);
+
+	/* The HW expects different devad if CL22 is used */
+	devad = (devad == MDIO_DEVAD_NONE) ? DEFAULT_PHY_DEV_ADDR : devad;
+
+	bnx2x_acquire_phy_lock(bp);
+	rc = bnx2x_phy_read(&bp->link_params, prtad, devad, addr, &value);
+	bnx2x_release_phy_lock(bp);
+	DP(NETIF_MSG_LINK, "mdio_read_val 0x%x rc = 0x%x\n", value, rc);
+
+	if (!rc)
+		rc = value;
+	return rc;
+}
+
+/* called with rtnl_lock */
+static int bnx2x_mdio_write(struct net_device *netdev, int prtad, int devad,
+			    u16 addr, u16 value)
+{
+	struct bnx2x *bp = netdev_priv(netdev);
+	int rc;
+
+	DP(NETIF_MSG_LINK, "mdio_write: prtad 0x%x, devad 0x%x, addr 0x%x,"
+			   " value 0x%x\n", prtad, devad, addr, value);
+
+	/* The HW expects different devad if CL22 is used */
+	devad = (devad == MDIO_DEVAD_NONE) ? DEFAULT_PHY_DEV_ADDR : devad;
+
+	bnx2x_acquire_phy_lock(bp);
+	rc = bnx2x_phy_write(&bp->link_params, prtad, devad, addr, value);
+	bnx2x_release_phy_lock(bp);
+	return rc;
+}
+
+/* called with rtnl_lock */
+static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+	struct mii_ioctl_data *mdio = if_mii(ifr);
+
+	DP(NETIF_MSG_LINK, "ioctl: phy id 0x%x, reg 0x%x, val_in 0x%x\n",
+	   mdio->phy_id, mdio->reg_num, mdio->val_in);
+
+	if (!netif_running(dev))
+		return -EAGAIN;
+
+	return mdio_mii_ioctl(&bp->mdio, mdio, cmd);
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void poll_bnx2x(struct net_device *dev)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+
+	disable_irq(bp->pdev->irq);
+	bnx2x_interrupt(bp->pdev->irq, dev);
+	enable_irq(bp->pdev->irq);
+}
+#endif
+
+static const struct net_device_ops bnx2x_netdev_ops = {
+	.ndo_open		= bnx2x_open,
+	.ndo_stop		= bnx2x_close,
+	.ndo_start_xmit		= bnx2x_start_xmit,
+	.ndo_select_queue	= bnx2x_select_queue,
+	.ndo_set_rx_mode	= bnx2x_set_rx_mode,
+	.ndo_set_mac_address	= bnx2x_change_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_do_ioctl		= bnx2x_ioctl,
+	.ndo_change_mtu		= bnx2x_change_mtu,
+	.ndo_fix_features	= bnx2x_fix_features,
+	.ndo_set_features	= bnx2x_set_features,
+	.ndo_tx_timeout		= bnx2x_tx_timeout,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= poll_bnx2x,
+#endif
+	.ndo_setup_tc		= bnx2x_setup_tc,
+
+#if defined(NETDEV_FCOE_WWNN) && defined(BCM_CNIC)
+	.ndo_fcoe_get_wwn	= bnx2x_fcoe_get_wwn,
+#endif
+};
+
+static inline int bnx2x_set_coherency_mask(struct bnx2x *bp)
+{
+	struct device *dev = &bp->pdev->dev;
+
+	if (dma_set_mask(dev, DMA_BIT_MASK(64)) == 0) {
+		bp->flags |= USING_DAC_FLAG;
+		if (dma_set_coherent_mask(dev, DMA_BIT_MASK(64)) != 0) {
+			dev_err(dev, "dma_set_coherent_mask failed, "
+				     "aborting\n");
+			return -EIO;
+		}
+	} else if (dma_set_mask(dev, DMA_BIT_MASK(32)) != 0) {
+		dev_err(dev, "System does not support DMA, aborting\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
+				    struct net_device *dev,
+				    unsigned long board_type)
+{
+	struct bnx2x *bp;
+	int rc;
+
+	SET_NETDEV_DEV(dev, &pdev->dev);
+	bp = netdev_priv(dev);
+
+	bp->dev = dev;
+	bp->pdev = pdev;
+	bp->flags = 0;
+	bp->pf_num = PCI_FUNC(pdev->devfn);
+
+	rc = pci_enable_device(pdev);
+	if (rc) {
+		dev_err(&bp->pdev->dev,
+			"Cannot enable PCI device, aborting\n");
+		goto err_out;
+	}
+
+	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
+		dev_err(&bp->pdev->dev,
+			"Cannot find PCI device base address, aborting\n");
+		rc = -ENODEV;
+		goto err_out_disable;
+	}
+
+	if (!(pci_resource_flags(pdev, 2) & IORESOURCE_MEM)) {
+		dev_err(&bp->pdev->dev, "Cannot find second PCI device"
+		       " base address, aborting\n");
+		rc = -ENODEV;
+		goto err_out_disable;
+	}
+
+	if (atomic_read(&pdev->enable_cnt) == 1) {
+		rc = pci_request_regions(pdev, DRV_MODULE_NAME);
+		if (rc) {
+			dev_err(&bp->pdev->dev,
+				"Cannot obtain PCI resources, aborting\n");
+			goto err_out_disable;
+		}
+
+		pci_set_master(pdev);
+		pci_save_state(pdev);
+	}
+
+	bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
+	if (bp->pm_cap == 0) {
+		dev_err(&bp->pdev->dev,
+			"Cannot find power management capability, aborting\n");
+		rc = -EIO;
+		goto err_out_release;
+	}
+
+	if (!pci_is_pcie(pdev)) {
+		dev_err(&bp->pdev->dev,	"Not PCI Express, aborting\n");
+		rc = -EIO;
+		goto err_out_release;
+	}
+
+	rc = bnx2x_set_coherency_mask(bp);
+	if (rc)
+		goto err_out_release;
+
+	dev->mem_start = pci_resource_start(pdev, 0);
+	dev->base_addr = dev->mem_start;
+	dev->mem_end = pci_resource_end(pdev, 0);
+
+	dev->irq = pdev->irq;
+
+	bp->regview = pci_ioremap_bar(pdev, 0);
+	if (!bp->regview) {
+		dev_err(&bp->pdev->dev,
+			"Cannot map register space, aborting\n");
+		rc = -ENOMEM;
+		goto err_out_release;
+	}
+
+	bnx2x_set_power_state(bp, PCI_D0);
+
+	/* clean indirect addresses */
+	pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS,
+			       PCICFG_VENDOR_ID_OFFSET);
+	REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0 + BP_PORT(bp)*16, 0);
+	REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0 + BP_PORT(bp)*16, 0);
+	REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0 + BP_PORT(bp)*16, 0);
+	REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0 + BP_PORT(bp)*16, 0);
+
+	/*
+	 * Enable internal target-read (in case we are probed after PF FLR).
+	 * Must be done prior to any BAR read access. Only for 57712 and up
+	 */
+	if (board_type != BCM57710 &&
+	    board_type != BCM57711 &&
+	    board_type != BCM57711E)
+		REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1);
+
+	/* Reset the load counter */
+	bnx2x_clear_load_cnt(bp);
+
+	dev->watchdog_timeo = TX_TIMEOUT;
+
+	dev->netdev_ops = &bnx2x_netdev_ops;
+	bnx2x_set_ethtool_ops(dev);
+
+	dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+		NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 |
+		NETIF_F_RXCSUM | NETIF_F_LRO | NETIF_F_HW_VLAN_TX;
+
+	dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+		NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_HIGHDMA;
+
+	dev->features |= dev->hw_features | NETIF_F_HW_VLAN_RX;
+	if (bp->flags & USING_DAC_FLAG)
+		dev->features |= NETIF_F_HIGHDMA;
+
+	/* Add Loopback capability to the device */
+	dev->hw_features |= NETIF_F_LOOPBACK;
+
+#ifdef BCM_DCBNL
+	dev->dcbnl_ops = &bnx2x_dcbnl_ops;
+#endif
+
+	/* get_port_hwinfo() will set prtad and mmds properly */
+	bp->mdio.prtad = MDIO_PRTAD_NONE;
+	bp->mdio.mmds = 0;
+	bp->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
+	bp->mdio.dev = dev;
+	bp->mdio.mdio_read = bnx2x_mdio_read;
+	bp->mdio.mdio_write = bnx2x_mdio_write;
+
+	return 0;
+
+err_out_release:
+	if (atomic_read(&pdev->enable_cnt) == 1)
+		pci_release_regions(pdev);
+
+err_out_disable:
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+
+err_out:
+	return rc;
+}
+
+static void __devinit bnx2x_get_pcie_width_speed(struct bnx2x *bp,
+						 int *width, int *speed)
+{
+	u32 val = REG_RD(bp, PCICFG_OFFSET + PCICFG_LINK_CONTROL);
+
+	*width = (val & PCICFG_LINK_WIDTH) >> PCICFG_LINK_WIDTH_SHIFT;
+
+	/* return value of 1=2.5GHz 2=5GHz */
+	*speed = (val & PCICFG_LINK_SPEED) >> PCICFG_LINK_SPEED_SHIFT;
+}
+
+static int bnx2x_check_firmware(struct bnx2x *bp)
+{
+	const struct firmware *firmware = bp->firmware;
+	struct bnx2x_fw_file_hdr *fw_hdr;
+	struct bnx2x_fw_file_section *sections;
+	u32 offset, len, num_ops;
+	u16 *ops_offsets;
+	int i;
+	const u8 *fw_ver;
+
+	if (firmware->size < sizeof(struct bnx2x_fw_file_hdr))
+		return -EINVAL;
+
+	fw_hdr = (struct bnx2x_fw_file_hdr *)firmware->data;
+	sections = (struct bnx2x_fw_file_section *)fw_hdr;
+
+	/* Make sure none of the offsets and sizes make us read beyond
+	 * the end of the firmware data */
+	for (i = 0; i < sizeof(*fw_hdr) / sizeof(*sections); i++) {
+		offset = be32_to_cpu(sections[i].offset);
+		len = be32_to_cpu(sections[i].len);
+		if (offset + len > firmware->size) {
+			dev_err(&bp->pdev->dev,
+				"Section %d length is out of bounds\n", i);
+			return -EINVAL;
+		}
+	}
+
+	/* Likewise for the init_ops offsets */
+	offset = be32_to_cpu(fw_hdr->init_ops_offsets.offset);
+	ops_offsets = (u16 *)(firmware->data + offset);
+	num_ops = be32_to_cpu(fw_hdr->init_ops.len) / sizeof(struct raw_op);
+
+	for (i = 0; i < be32_to_cpu(fw_hdr->init_ops_offsets.len) / 2; i++) {
+		if (be16_to_cpu(ops_offsets[i]) > num_ops) {
+			dev_err(&bp->pdev->dev,
+				"Section offset %d is out of bounds\n", i);
+			return -EINVAL;
+		}
+	}
+
+	/* Check FW version */
+	offset = be32_to_cpu(fw_hdr->fw_version.offset);
+	fw_ver = firmware->data + offset;
+	if ((fw_ver[0] != BCM_5710_FW_MAJOR_VERSION) ||
+	    (fw_ver[1] != BCM_5710_FW_MINOR_VERSION) ||
+	    (fw_ver[2] != BCM_5710_FW_REVISION_VERSION) ||
+	    (fw_ver[3] != BCM_5710_FW_ENGINEERING_VERSION)) {
+		dev_err(&bp->pdev->dev,
+			"Bad FW version:%d.%d.%d.%d. Should be %d.%d.%d.%d\n",
+		       fw_ver[0], fw_ver[1], fw_ver[2],
+		       fw_ver[3], BCM_5710_FW_MAJOR_VERSION,
+		       BCM_5710_FW_MINOR_VERSION,
+		       BCM_5710_FW_REVISION_VERSION,
+		       BCM_5710_FW_ENGINEERING_VERSION);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static inline void be32_to_cpu_n(const u8 *_source, u8 *_target, u32 n)
+{
+	const __be32 *source = (const __be32 *)_source;
+	u32 *target = (u32 *)_target;
+	u32 i;
+
+	for (i = 0; i < n/4; i++)
+		target[i] = be32_to_cpu(source[i]);
+}
+
+/*
+   Ops array is stored in the following format:
+   {op(8bit), offset(24bit, big endian), data(32bit, big endian)}
+ */
+static inline void bnx2x_prep_ops(const u8 *_source, u8 *_target, u32 n)
+{
+	const __be32 *source = (const __be32 *)_source;
+	struct raw_op *target = (struct raw_op *)_target;
+	u32 i, j, tmp;
+
+	for (i = 0, j = 0; i < n/8; i++, j += 2) {
+		tmp = be32_to_cpu(source[j]);
+		target[i].op = (tmp >> 24) & 0xff;
+		target[i].offset = tmp & 0xffffff;
+		target[i].raw_data = be32_to_cpu(source[j + 1]);
+	}
+}
+
+/**
+ * IRO array is stored in the following format:
+ * {base(24bit), m1(16bit), m2(16bit), m3(16bit), size(16bit) }
+ */
+static inline void bnx2x_prep_iro(const u8 *_source, u8 *_target, u32 n)
+{
+	const __be32 *source = (const __be32 *)_source;
+	struct iro *target = (struct iro *)_target;
+	u32 i, j, tmp;
+
+	for (i = 0, j = 0; i < n/sizeof(struct iro); i++) {
+		target[i].base = be32_to_cpu(source[j]);
+		j++;
+		tmp = be32_to_cpu(source[j]);
+		target[i].m1 = (tmp >> 16) & 0xffff;
+		target[i].m2 = tmp & 0xffff;
+		j++;
+		tmp = be32_to_cpu(source[j]);
+		target[i].m3 = (tmp >> 16) & 0xffff;
+		target[i].size = tmp & 0xffff;
+		j++;
+	}
+}
+
+static inline void be16_to_cpu_n(const u8 *_source, u8 *_target, u32 n)
+{
+	const __be16 *source = (const __be16 *)_source;
+	u16 *target = (u16 *)_target;
+	u32 i;
+
+	for (i = 0; i < n/2; i++)
+		target[i] = be16_to_cpu(source[i]);
+}
+
+#define BNX2X_ALLOC_AND_SET(arr, lbl, func)				\
+do {									\
+	u32 len = be32_to_cpu(fw_hdr->arr.len);				\
+	bp->arr = kmalloc(len, GFP_KERNEL);				\
+	if (!bp->arr) {							\
+		pr_err("Failed to allocate %d bytes for "#arr"\n", len); \
+		goto lbl;						\
+	}								\
+	func(bp->firmware->data + be32_to_cpu(fw_hdr->arr.offset),	\
+	     (u8 *)bp->arr, len);					\
+} while (0)
+
+int bnx2x_init_firmware(struct bnx2x *bp)
+{
+	const char *fw_file_name;
+	struct bnx2x_fw_file_hdr *fw_hdr;
+	int rc;
+
+	if (CHIP_IS_E1(bp))
+		fw_file_name = FW_FILE_NAME_E1;
+	else if (CHIP_IS_E1H(bp))
+		fw_file_name = FW_FILE_NAME_E1H;
+	else if (!CHIP_IS_E1x(bp))
+		fw_file_name = FW_FILE_NAME_E2;
+	else {
+		BNX2X_ERR("Unsupported chip revision\n");
+		return -EINVAL;
+	}
+
+	BNX2X_DEV_INFO("Loading %s\n", fw_file_name);
+
+	rc = request_firmware(&bp->firmware, fw_file_name, &bp->pdev->dev);
+	if (rc) {
+		BNX2X_ERR("Can't load firmware file %s\n", fw_file_name);
+		goto request_firmware_exit;
+	}
+
+	rc = bnx2x_check_firmware(bp);
+	if (rc) {
+		BNX2X_ERR("Corrupt firmware file %s\n", fw_file_name);
+		goto request_firmware_exit;
+	}
+
+	fw_hdr = (struct bnx2x_fw_file_hdr *)bp->firmware->data;
+
+	/* Initialize the pointers to the init arrays */
+	/* Blob */
+	BNX2X_ALLOC_AND_SET(init_data, request_firmware_exit, be32_to_cpu_n);
+
+	/* Opcodes */
+	BNX2X_ALLOC_AND_SET(init_ops, init_ops_alloc_err, bnx2x_prep_ops);
+
+	/* Offsets */
+	BNX2X_ALLOC_AND_SET(init_ops_offsets, init_offsets_alloc_err,
+			    be16_to_cpu_n);
+
+	/* STORMs firmware */
+	INIT_TSEM_INT_TABLE_DATA(bp) = bp->firmware->data +
+			be32_to_cpu(fw_hdr->tsem_int_table_data.offset);
+	INIT_TSEM_PRAM_DATA(bp)      = bp->firmware->data +
+			be32_to_cpu(fw_hdr->tsem_pram_data.offset);
+	INIT_USEM_INT_TABLE_DATA(bp) = bp->firmware->data +
+			be32_to_cpu(fw_hdr->usem_int_table_data.offset);
+	INIT_USEM_PRAM_DATA(bp)      = bp->firmware->data +
+			be32_to_cpu(fw_hdr->usem_pram_data.offset);
+	INIT_XSEM_INT_TABLE_DATA(bp) = bp->firmware->data +
+			be32_to_cpu(fw_hdr->xsem_int_table_data.offset);
+	INIT_XSEM_PRAM_DATA(bp)      = bp->firmware->data +
+			be32_to_cpu(fw_hdr->xsem_pram_data.offset);
+	INIT_CSEM_INT_TABLE_DATA(bp) = bp->firmware->data +
+			be32_to_cpu(fw_hdr->csem_int_table_data.offset);
+	INIT_CSEM_PRAM_DATA(bp)      = bp->firmware->data +
+			be32_to_cpu(fw_hdr->csem_pram_data.offset);
+	/* IRO */
+	BNX2X_ALLOC_AND_SET(iro_arr, iro_alloc_err, bnx2x_prep_iro);
+
+	return 0;
+
+iro_alloc_err:
+	kfree(bp->init_ops_offsets);
+init_offsets_alloc_err:
+	kfree(bp->init_ops);
+init_ops_alloc_err:
+	kfree(bp->init_data);
+request_firmware_exit:
+	release_firmware(bp->firmware);
+
+	return rc;
+}
+
+static void bnx2x_release_firmware(struct bnx2x *bp)
+{
+	kfree(bp->init_ops_offsets);
+	kfree(bp->init_ops);
+	kfree(bp->init_data);
+	release_firmware(bp->firmware);
+}
+
+
+static struct bnx2x_func_sp_drv_ops bnx2x_func_sp_drv = {
+	.init_hw_cmn_chip = bnx2x_init_hw_common_chip,
+	.init_hw_cmn      = bnx2x_init_hw_common,
+	.init_hw_port     = bnx2x_init_hw_port,
+	.init_hw_func     = bnx2x_init_hw_func,
+
+	.reset_hw_cmn     = bnx2x_reset_common,
+	.reset_hw_port    = bnx2x_reset_port,
+	.reset_hw_func    = bnx2x_reset_func,
+
+	.gunzip_init      = bnx2x_gunzip_init,
+	.gunzip_end       = bnx2x_gunzip_end,
+
+	.init_fw          = bnx2x_init_firmware,
+	.release_fw       = bnx2x_release_firmware,
+};
+
+void bnx2x__init_func_obj(struct bnx2x *bp)
+{
+	/* Prepare DMAE related driver resources */
+	bnx2x_setup_dmae(bp);
+
+	bnx2x_init_func_obj(bp, &bp->func_obj,
+			    bnx2x_sp(bp, func_rdata),
+			    bnx2x_sp_mapping(bp, func_rdata),
+			    &bnx2x_func_sp_drv);
+}
+
+/* must be called after sriov-enable */
+static inline int bnx2x_set_qm_cid_count(struct bnx2x *bp)
+{
+	int cid_count = BNX2X_L2_CID_COUNT(bp);
+
+#ifdef BCM_CNIC
+	cid_count += CNIC_CID_MAX;
+#endif
+	return roundup(cid_count, QM_CID_ROUND);
+}
+
+/**
+ * bnx2x_get_num_none_def_sbs - return the number of none default SBs
+ *
+ * @dev:	pci device
+ *
+ */
+static inline int bnx2x_get_num_non_def_sbs(struct pci_dev *pdev)
+{
+	int pos;
+	u16 control;
+
+	pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
+
+	/*
+	 * If MSI-X is not supported - return number of SBs needed to support
+	 * one fast path queue: one FP queue + SB for CNIC
+	 */
+	if (!pos)
+		return 1 + CNIC_PRESENT;
+
+	/*
+	 * The value in the PCI configuration space is the index of the last
+	 * entry, namely one less than the actual size of the table, which is
+	 * exactly what we want to return from this function: number of all SBs
+	 * without the default SB.
+	 */
+	pci_read_config_word(pdev, pos  + PCI_MSI_FLAGS, &control);
+	return control & PCI_MSIX_FLAGS_QSIZE;
+}
+
+static int __devinit bnx2x_init_one(struct pci_dev *pdev,
+				    const struct pci_device_id *ent)
+{
+	struct net_device *dev = NULL;
+	struct bnx2x *bp;
+	int pcie_width, pcie_speed;
+	int rc, max_non_def_sbs;
+	int rx_count, tx_count, rss_count;
+	/*
+	 * An estimated maximum supported CoS number according to the chip
+	 * version.
+	 * We will try to roughly estimate the maximum number of CoSes this chip
+	 * may support in order to minimize the memory allocated for Tx
+	 * netdev_queue's. This number will be accurately calculated during the
+	 * initialization of bp->max_cos based on the chip versions AND chip
+	 * revision in the bnx2x_init_bp().
+	 */
+	u8 max_cos_est = 0;
+
+	switch (ent->driver_data) {
+	case BCM57710:
+	case BCM57711:
+	case BCM57711E:
+		max_cos_est = BNX2X_MULTI_TX_COS_E1X;
+		break;
+
+	case BCM57712:
+	case BCM57712_MF:
+		max_cos_est = BNX2X_MULTI_TX_COS_E2_E3A0;
+		break;
+
+	case BCM57800:
+	case BCM57800_MF:
+	case BCM57810:
+	case BCM57810_MF:
+	case BCM57840:
+	case BCM57840_MF:
+		max_cos_est = BNX2X_MULTI_TX_COS_E3B0;
+		break;
+
+	default:
+		pr_err("Unknown board_type (%ld), aborting\n",
+			   ent->driver_data);
+		return -ENODEV;
+	}
+
+	max_non_def_sbs = bnx2x_get_num_non_def_sbs(pdev);
+
+	/* !!! FIXME !!!
+	 * Do not allow the maximum SB count to grow above 16
+	 * since Special CIDs starts from 16*BNX2X_MULTI_TX_COS=48.
+	 * We will use the FP_SB_MAX_E1x macro for this matter.
+	 */
+	max_non_def_sbs = min_t(int, FP_SB_MAX_E1x, max_non_def_sbs);
+
+	WARN_ON(!max_non_def_sbs);
+
+	/* Maximum number of RSS queues: one IGU SB goes to CNIC */
+	rss_count = max_non_def_sbs - CNIC_PRESENT;
+
+	/* Maximum number of netdev Rx queues: RSS + FCoE L2 */
+	rx_count = rss_count + FCOE_PRESENT;
+
+	/*
+	 * Maximum number of netdev Tx queues:
+	 *      Maximum TSS queues * Maximum supported number of CoS  + FCoE L2
+	 */
+	tx_count = MAX_TXQS_PER_COS * max_cos_est + FCOE_PRESENT;
+
+	/* dev zeroed in init_etherdev */
+	dev = alloc_etherdev_mqs(sizeof(*bp), tx_count, rx_count);
+	if (!dev) {
+		dev_err(&pdev->dev, "Cannot allocate net device\n");
+		return -ENOMEM;
+	}
+
+	bp = netdev_priv(dev);
+
+	DP(NETIF_MSG_DRV, "Allocated netdev with %d tx and %d rx queues\n",
+			  tx_count, rx_count);
+
+	bp->igu_sb_cnt = max_non_def_sbs;
+	bp->msg_enable = debug;
+	pci_set_drvdata(pdev, dev);
+
+	rc = bnx2x_init_dev(pdev, dev, ent->driver_data);
+	if (rc < 0) {
+		free_netdev(dev);
+		return rc;
+	}
+
+	DP(NETIF_MSG_DRV, "max_non_def_sbs %d", max_non_def_sbs);
+
+	rc = bnx2x_init_bp(bp);
+	if (rc)
+		goto init_one_exit;
+
+	/*
+	 * Map doorbels here as we need the real value of bp->max_cos which
+	 * is initialized in bnx2x_init_bp().
+	 */
+	bp->doorbells = ioremap_nocache(pci_resource_start(pdev, 2),
+					min_t(u64, BNX2X_DB_SIZE(bp),
+					      pci_resource_len(pdev, 2)));
+	if (!bp->doorbells) {
+		dev_err(&bp->pdev->dev,
+			"Cannot map doorbell space, aborting\n");
+		rc = -ENOMEM;
+		goto init_one_exit;
+	}
+
+	/* calc qm_cid_count */
+	bp->qm_cid_count = bnx2x_set_qm_cid_count(bp);
+
+#ifdef BCM_CNIC
+	/* disable FCOE L2 queue for E1x and E3*/
+	if (CHIP_IS_E1x(bp) || CHIP_IS_E3(bp))
+		bp->flags |= NO_FCOE_FLAG;
+
+#endif
+
+	/* Configure interrupt mode: try to enable MSI-X/MSI if
+	 * needed, set bp->num_queues appropriately.
+	 */
+	bnx2x_set_int_mode(bp);
+
+	/* Add all NAPI objects */
+	bnx2x_add_all_napi(bp);
+
+	rc = register_netdev(dev);
+	if (rc) {
+		dev_err(&pdev->dev, "Cannot register net device\n");
+		goto init_one_exit;
+	}
+
+#ifdef BCM_CNIC
+	if (!NO_FCOE(bp)) {
+		/* Add storage MAC address */
+		rtnl_lock();
+		dev_addr_add(bp->dev, bp->fip_mac, NETDEV_HW_ADDR_T_SAN);
+		rtnl_unlock();
+	}
+#endif
+
+	bnx2x_get_pcie_width_speed(bp, &pcie_width, &pcie_speed);
+
+	netdev_info(dev, "%s (%c%d) PCI-E x%d %s found at mem %lx,"
+	       " IRQ %d, ", board_info[ent->driver_data].name,
+	       (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4),
+	       pcie_width,
+	       ((!CHIP_IS_E2(bp) && pcie_speed == 2) ||
+		 (CHIP_IS_E2(bp) && pcie_speed == 1)) ?
+						"5GHz (Gen2)" : "2.5GHz",
+	       dev->base_addr, bp->pdev->irq);
+	pr_cont("node addr %pM\n", dev->dev_addr);
+
+	return 0;
+
+init_one_exit:
+	if (bp->regview)
+		iounmap(bp->regview);
+
+	if (bp->doorbells)
+		iounmap(bp->doorbells);
+
+	free_netdev(dev);
+
+	if (atomic_read(&pdev->enable_cnt) == 1)
+		pci_release_regions(pdev);
+
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+
+	return rc;
+}
+
+static void __devexit bnx2x_remove_one(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct bnx2x *bp;
+
+	if (!dev) {
+		dev_err(&pdev->dev, "BAD net device from bnx2x_init_one\n");
+		return;
+	}
+	bp = netdev_priv(dev);
+
+#ifdef BCM_CNIC
+	/* Delete storage MAC address */
+	if (!NO_FCOE(bp)) {
+		rtnl_lock();
+		dev_addr_del(bp->dev, bp->fip_mac, NETDEV_HW_ADDR_T_SAN);
+		rtnl_unlock();
+	}
+#endif
+
+#ifdef BCM_DCBNL
+	/* Delete app tlvs from dcbnl */
+	bnx2x_dcbnl_update_applist(bp, true);
+#endif
+
+	unregister_netdev(dev);
+
+	/* Delete all NAPI objects */
+	bnx2x_del_all_napi(bp);
+
+	/* Power on: we can't let PCI layer write to us while we are in D3 */
+	bnx2x_set_power_state(bp, PCI_D0);
+
+	/* Disable MSI/MSI-X */
+	bnx2x_disable_msi(bp);
+
+	/* Power off */
+	bnx2x_set_power_state(bp, PCI_D3hot);
+
+	/* Make sure RESET task is not scheduled before continuing */
+	cancel_delayed_work_sync(&bp->sp_rtnl_task);
+
+	if (bp->regview)
+		iounmap(bp->regview);
+
+	if (bp->doorbells)
+		iounmap(bp->doorbells);
+
+	bnx2x_free_mem_bp(bp);
+
+	free_netdev(dev);
+
+	if (atomic_read(&pdev->enable_cnt) == 1)
+		pci_release_regions(pdev);
+
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+}
+
+static int bnx2x_eeh_nic_unload(struct bnx2x *bp)
+{
+	int i;
+
+	bp->state = BNX2X_STATE_ERROR;
+
+	bp->rx_mode = BNX2X_RX_MODE_NONE;
+
+#ifdef BCM_CNIC
+	bnx2x_cnic_notify(bp, CNIC_CTL_STOP_CMD);
+#endif
+	/* Stop Tx */
+	bnx2x_tx_disable(bp);
+
+	bnx2x_netif_stop(bp, 0);
+
+	del_timer_sync(&bp->timer);
+
+	bnx2x_stats_handle(bp, STATS_EVENT_STOP);
+
+	/* Release IRQs */
+	bnx2x_free_irq(bp);
+
+	/* Free SKBs, SGEs, TPA pool and driver internals */
+	bnx2x_free_skbs(bp);
+
+	for_each_rx_queue(bp, i)
+		bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
+
+	bnx2x_free_mem(bp);
+
+	bp->state = BNX2X_STATE_CLOSED;
+
+	netif_carrier_off(bp->dev);
+
+	return 0;
+}
+
+static void bnx2x_eeh_recover(struct bnx2x *bp)
+{
+	u32 val;
+
+	mutex_init(&bp->port.phy_mutex);
+
+	bp->common.shmem_base = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR);
+	bp->link_params.shmem_base = bp->common.shmem_base;
+	BNX2X_DEV_INFO("shmem offset is 0x%x\n", bp->common.shmem_base);
+
+	if (!bp->common.shmem_base ||
+	    (bp->common.shmem_base < 0xA0000) ||
+	    (bp->common.shmem_base >= 0xC0000)) {
+		BNX2X_DEV_INFO("MCP not active\n");
+		bp->flags |= NO_MCP_FLAG;
+		return;
+	}
+
+	val = SHMEM_RD(bp, validity_map[BP_PORT(bp)]);
+	if ((val & (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB))
+		!= (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB))
+		BNX2X_ERR("BAD MCP validity signature\n");
+
+	if (!BP_NOMCP(bp)) {
+		bp->fw_seq =
+		    (SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) &
+		    DRV_MSG_SEQ_NUMBER_MASK);
+		BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq);
+	}
+}
+
+/**
+ * bnx2x_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t bnx2x_io_error_detected(struct pci_dev *pdev,
+						pci_channel_state_t state)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct bnx2x *bp = netdev_priv(dev);
+
+	rtnl_lock();
+
+	netif_device_detach(dev);
+
+	if (state == pci_channel_io_perm_failure) {
+		rtnl_unlock();
+		return PCI_ERS_RESULT_DISCONNECT;
+	}
+
+	if (netif_running(dev))
+		bnx2x_eeh_nic_unload(bp);
+
+	pci_disable_device(pdev);
+
+	rtnl_unlock();
+
+	/* Request a slot reset */
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * bnx2x_io_slot_reset - called after the PCI bus has been reset
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot.
+ */
+static pci_ers_result_t bnx2x_io_slot_reset(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct bnx2x *bp = netdev_priv(dev);
+
+	rtnl_lock();
+
+	if (pci_enable_device(pdev)) {
+		dev_err(&pdev->dev,
+			"Cannot re-enable PCI device after reset\n");
+		rtnl_unlock();
+		return PCI_ERS_RESULT_DISCONNECT;
+	}
+
+	pci_set_master(pdev);
+	pci_restore_state(pdev);
+
+	if (netif_running(dev))
+		bnx2x_set_power_state(bp, PCI_D0);
+
+	rtnl_unlock();
+
+	return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * bnx2x_io_resume - called when traffic can start flowing again
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation.
+ */
+static void bnx2x_io_resume(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct bnx2x *bp = netdev_priv(dev);
+
+	if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
+		netdev_err(bp->dev, "Handling parity error recovery. "
+				    "Try again later\n");
+		return;
+	}
+
+	rtnl_lock();
+
+	bnx2x_eeh_recover(bp);
+
+	if (netif_running(dev))
+		bnx2x_nic_load(bp, LOAD_NORMAL);
+
+	netif_device_attach(dev);
+
+	rtnl_unlock();
+}
+
+static struct pci_error_handlers bnx2x_err_handler = {
+	.error_detected = bnx2x_io_error_detected,
+	.slot_reset     = bnx2x_io_slot_reset,
+	.resume         = bnx2x_io_resume,
+};
+
+static struct pci_driver bnx2x_pci_driver = {
+	.name        = DRV_MODULE_NAME,
+	.id_table    = bnx2x_pci_tbl,
+	.probe       = bnx2x_init_one,
+	.remove      = __devexit_p(bnx2x_remove_one),
+	.suspend     = bnx2x_suspend,
+	.resume      = bnx2x_resume,
+	.err_handler = &bnx2x_err_handler,
+};
+
+static int __init bnx2x_init(void)
+{
+	int ret;
+
+	pr_info("%s", version);
+
+	bnx2x_wq = create_singlethread_workqueue("bnx2x");
+	if (bnx2x_wq == NULL) {
+		pr_err("Cannot create workqueue\n");
+		return -ENOMEM;
+	}
+
+	ret = pci_register_driver(&bnx2x_pci_driver);
+	if (ret) {
+		pr_err("Cannot register driver\n");
+		destroy_workqueue(bnx2x_wq);
+	}
+	return ret;
+}
+
+static void __exit bnx2x_cleanup(void)
+{
+	pci_unregister_driver(&bnx2x_pci_driver);
+
+	destroy_workqueue(bnx2x_wq);
+}
+
+void bnx2x_notify_link_changed(struct bnx2x *bp)
+{
+	REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + BP_FUNC(bp)*sizeof(u32), 1);
+}
+
+module_init(bnx2x_init);
+module_exit(bnx2x_cleanup);
+
+#ifdef BCM_CNIC
+/**
+ * bnx2x_set_iscsi_eth_mac_addr - set iSCSI MAC(s).
+ *
+ * @bp:		driver handle
+ * @set:	set or clear the CAM entry
+ *
+ * This function will wait until the ramdord completion returns.
+ * Return 0 if success, -ENODEV if ramrod doesn't return.
+ */
+static inline int bnx2x_set_iscsi_eth_mac_addr(struct bnx2x *bp)
+{
+	unsigned long ramrod_flags = 0;
+
+	__set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
+	return bnx2x_set_mac_one(bp, bp->cnic_eth_dev.iscsi_mac,
+				 &bp->iscsi_l2_mac_obj, true,
+				 BNX2X_ISCSI_ETH_MAC, &ramrod_flags);
+}
+
+/* count denotes the number of new completions we have seen */
+static void bnx2x_cnic_sp_post(struct bnx2x *bp, int count)
+{
+	struct eth_spe *spe;
+
+#ifdef BNX2X_STOP_ON_ERROR
+	if (unlikely(bp->panic))
+		return;
+#endif
+
+	spin_lock_bh(&bp->spq_lock);
+	BUG_ON(bp->cnic_spq_pending < count);
+	bp->cnic_spq_pending -= count;
+
+
+	for (; bp->cnic_kwq_pending; bp->cnic_kwq_pending--) {
+		u16 type =  (le16_to_cpu(bp->cnic_kwq_cons->hdr.type)
+				& SPE_HDR_CONN_TYPE) >>
+				SPE_HDR_CONN_TYPE_SHIFT;
+		u8 cmd = (le32_to_cpu(bp->cnic_kwq_cons->hdr.conn_and_cmd_data)
+				>> SPE_HDR_CMD_ID_SHIFT) & 0xff;
+
+		/* Set validation for iSCSI L2 client before sending SETUP
+		 *  ramrod
+		 */
+		if (type == ETH_CONNECTION_TYPE) {
+			if (cmd == RAMROD_CMD_ID_ETH_CLIENT_SETUP)
+				bnx2x_set_ctx_validation(bp, &bp->context.
+					vcxt[BNX2X_ISCSI_ETH_CID].eth,
+					BNX2X_ISCSI_ETH_CID);
+		}
+
+		/*
+		 * There may be not more than 8 L2, not more than 8 L5 SPEs
+		 * and in the air. We also check that number of outstanding
+		 * COMMON ramrods is not more than the EQ and SPQ can
+		 * accommodate.
+		 */
+		if (type == ETH_CONNECTION_TYPE) {
+			if (!atomic_read(&bp->cq_spq_left))
+				break;
+			else
+				atomic_dec(&bp->cq_spq_left);
+		} else if (type == NONE_CONNECTION_TYPE) {
+			if (!atomic_read(&bp->eq_spq_left))
+				break;
+			else
+				atomic_dec(&bp->eq_spq_left);
+		} else if ((type == ISCSI_CONNECTION_TYPE) ||
+			   (type == FCOE_CONNECTION_TYPE)) {
+			if (bp->cnic_spq_pending >=
+			    bp->cnic_eth_dev.max_kwqe_pending)
+				break;
+			else
+				bp->cnic_spq_pending++;
+		} else {
+			BNX2X_ERR("Unknown SPE type: %d\n", type);
+			bnx2x_panic();
+			break;
+		}
+
+		spe = bnx2x_sp_get_next(bp);
+		*spe = *bp->cnic_kwq_cons;
+
+		DP(NETIF_MSG_TIMER, "pending on SPQ %d, on KWQ %d count %d\n",
+		   bp->cnic_spq_pending, bp->cnic_kwq_pending, count);
+
+		if (bp->cnic_kwq_cons == bp->cnic_kwq_last)
+			bp->cnic_kwq_cons = bp->cnic_kwq;
+		else
+			bp->cnic_kwq_cons++;
+	}
+	bnx2x_sp_prod_update(bp);
+	spin_unlock_bh(&bp->spq_lock);
+}
+
+static int bnx2x_cnic_sp_queue(struct net_device *dev,
+			       struct kwqe_16 *kwqes[], u32 count)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+	int i;
+
+#ifdef BNX2X_STOP_ON_ERROR
+	if (unlikely(bp->panic))
+		return -EIO;
+#endif
+
+	spin_lock_bh(&bp->spq_lock);
+
+	for (i = 0; i < count; i++) {
+		struct eth_spe *spe = (struct eth_spe *)kwqes[i];
+
+		if (bp->cnic_kwq_pending == MAX_SP_DESC_CNT)
+			break;
+
+		*bp->cnic_kwq_prod = *spe;
+
+		bp->cnic_kwq_pending++;
+
+		DP(NETIF_MSG_TIMER, "L5 SPQE %x %x %x:%x pos %d\n",
+		   spe->hdr.conn_and_cmd_data, spe->hdr.type,
+		   spe->data.update_data_addr.hi,
+		   spe->data.update_data_addr.lo,
+		   bp->cnic_kwq_pending);
+
+		if (bp->cnic_kwq_prod == bp->cnic_kwq_last)
+			bp->cnic_kwq_prod = bp->cnic_kwq;
+		else
+			bp->cnic_kwq_prod++;
+	}
+
+	spin_unlock_bh(&bp->spq_lock);
+
+	if (bp->cnic_spq_pending < bp->cnic_eth_dev.max_kwqe_pending)
+		bnx2x_cnic_sp_post(bp, 0);
+
+	return i;
+}
+
+static int bnx2x_cnic_ctl_send(struct bnx2x *bp, struct cnic_ctl_info *ctl)
+{
+	struct cnic_ops *c_ops;
+	int rc = 0;
+
+	mutex_lock(&bp->cnic_mutex);
+	c_ops = rcu_dereference_protected(bp->cnic_ops,
+					  lockdep_is_held(&bp->cnic_mutex));
+	if (c_ops)
+		rc = c_ops->cnic_ctl(bp->cnic_data, ctl);
+	mutex_unlock(&bp->cnic_mutex);
+
+	return rc;
+}
+
+static int bnx2x_cnic_ctl_send_bh(struct bnx2x *bp, struct cnic_ctl_info *ctl)
+{
+	struct cnic_ops *c_ops;
+	int rc = 0;
+
+	rcu_read_lock();
+	c_ops = rcu_dereference(bp->cnic_ops);
+	if (c_ops)
+		rc = c_ops->cnic_ctl(bp->cnic_data, ctl);
+	rcu_read_unlock();
+
+	return rc;
+}
+
+/*
+ * for commands that have no data
+ */
+int bnx2x_cnic_notify(struct bnx2x *bp, int cmd)
+{
+	struct cnic_ctl_info ctl = {0};
+
+	ctl.cmd = cmd;
+
+	return bnx2x_cnic_ctl_send(bp, &ctl);
+}
+
+static void bnx2x_cnic_cfc_comp(struct bnx2x *bp, int cid, u8 err)
+{
+	struct cnic_ctl_info ctl = {0};
+
+	/* first we tell CNIC and only then we count this as a completion */
+	ctl.cmd = CNIC_CTL_COMPLETION_CMD;
+	ctl.data.comp.cid = cid;
+	ctl.data.comp.error = err;
+
+	bnx2x_cnic_ctl_send_bh(bp, &ctl);
+	bnx2x_cnic_sp_post(bp, 0);
+}
+
+
+/* Called with netif_addr_lock_bh() taken.
+ * Sets an rx_mode config for an iSCSI ETH client.
+ * Doesn't block.
+ * Completion should be checked outside.
+ */
+static void bnx2x_set_iscsi_eth_rx_mode(struct bnx2x *bp, bool start)
+{
+	unsigned long accept_flags = 0, ramrod_flags = 0;
+	u8 cl_id = bnx2x_cnic_eth_cl_id(bp, BNX2X_ISCSI_ETH_CL_ID_IDX);
+	int sched_state = BNX2X_FILTER_ISCSI_ETH_STOP_SCHED;
+
+	if (start) {
+		/* Start accepting on iSCSI L2 ring. Accept all multicasts
+		 * because it's the only way for UIO Queue to accept
+		 * multicasts (in non-promiscuous mode only one Queue per
+		 * function will receive multicast packets (leading in our
+		 * case).
+		 */
+		__set_bit(BNX2X_ACCEPT_UNICAST, &accept_flags);
+		__set_bit(BNX2X_ACCEPT_ALL_MULTICAST, &accept_flags);
+		__set_bit(BNX2X_ACCEPT_BROADCAST, &accept_flags);
+		__set_bit(BNX2X_ACCEPT_ANY_VLAN, &accept_flags);
+
+		/* Clear STOP_PENDING bit if START is requested */
+		clear_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED, &bp->sp_state);
+
+		sched_state = BNX2X_FILTER_ISCSI_ETH_START_SCHED;
+	} else
+		/* Clear START_PENDING bit if STOP is requested */
+		clear_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED, &bp->sp_state);
+
+	if (test_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state))
+		set_bit(sched_state, &bp->sp_state);
+	else {
+		__set_bit(RAMROD_RX, &ramrod_flags);
+		bnx2x_set_q_rx_mode(bp, cl_id, 0, accept_flags, 0,
+				    ramrod_flags);
+	}
+}
+
+
+static int bnx2x_drv_ctl(struct net_device *dev, struct drv_ctl_info *ctl)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+	int rc = 0;
+
+	switch (ctl->cmd) {
+	case DRV_CTL_CTXTBL_WR_CMD: {
+		u32 index = ctl->data.io.offset;
+		dma_addr_t addr = ctl->data.io.dma_addr;
+
+		bnx2x_ilt_wr(bp, index, addr);
+		break;
+	}
+
+	case DRV_CTL_RET_L5_SPQ_CREDIT_CMD: {
+		int count = ctl->data.credit.credit_count;
+
+		bnx2x_cnic_sp_post(bp, count);
+		break;
+	}
+
+	/* rtnl_lock is held.  */
+	case DRV_CTL_START_L2_CMD: {
+		struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+		unsigned long sp_bits = 0;
+
+		/* Configure the iSCSI classification object */
+		bnx2x_init_mac_obj(bp, &bp->iscsi_l2_mac_obj,
+				   cp->iscsi_l2_client_id,
+				   cp->iscsi_l2_cid, BP_FUNC(bp),
+				   bnx2x_sp(bp, mac_rdata),
+				   bnx2x_sp_mapping(bp, mac_rdata),
+				   BNX2X_FILTER_MAC_PENDING,
+				   &bp->sp_state, BNX2X_OBJ_TYPE_RX,
+				   &bp->macs_pool);
+
+		/* Set iSCSI MAC address */
+		rc = bnx2x_set_iscsi_eth_mac_addr(bp);
+		if (rc)
+			break;
+
+		mmiowb();
+		barrier();
+
+		/* Start accepting on iSCSI L2 ring */
+
+		netif_addr_lock_bh(dev);
+		bnx2x_set_iscsi_eth_rx_mode(bp, true);
+		netif_addr_unlock_bh(dev);
+
+		/* bits to wait on */
+		__set_bit(BNX2X_FILTER_RX_MODE_PENDING, &sp_bits);
+		__set_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED, &sp_bits);
+
+		if (!bnx2x_wait_sp_comp(bp, sp_bits))
+			BNX2X_ERR("rx_mode completion timed out!\n");
+
+		break;
+	}
+
+	/* rtnl_lock is held.  */
+	case DRV_CTL_STOP_L2_CMD: {
+		unsigned long sp_bits = 0;
+
+		/* Stop accepting on iSCSI L2 ring */
+		netif_addr_lock_bh(dev);
+		bnx2x_set_iscsi_eth_rx_mode(bp, false);
+		netif_addr_unlock_bh(dev);
+
+		/* bits to wait on */
+		__set_bit(BNX2X_FILTER_RX_MODE_PENDING, &sp_bits);
+		__set_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED, &sp_bits);
+
+		if (!bnx2x_wait_sp_comp(bp, sp_bits))
+			BNX2X_ERR("rx_mode completion timed out!\n");
+
+		mmiowb();
+		barrier();
+
+		/* Unset iSCSI L2 MAC */
+		rc = bnx2x_del_all_macs(bp, &bp->iscsi_l2_mac_obj,
+					BNX2X_ISCSI_ETH_MAC, true);
+		break;
+	}
+	case DRV_CTL_RET_L2_SPQ_CREDIT_CMD: {
+		int count = ctl->data.credit.credit_count;
+
+		smp_mb__before_atomic_inc();
+		atomic_add(count, &bp->cq_spq_left);
+		smp_mb__after_atomic_inc();
+		break;
+	}
+
+	default:
+		BNX2X_ERR("unknown command %x\n", ctl->cmd);
+		rc = -EINVAL;
+	}
+
+	return rc;
+}
+
+void bnx2x_setup_cnic_irq_info(struct bnx2x *bp)
+{
+	struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+
+	if (bp->flags & USING_MSIX_FLAG) {
+		cp->drv_state |= CNIC_DRV_STATE_USING_MSIX;
+		cp->irq_arr[0].irq_flags |= CNIC_IRQ_FL_MSIX;
+		cp->irq_arr[0].vector = bp->msix_table[1].vector;
+	} else {
+		cp->drv_state &= ~CNIC_DRV_STATE_USING_MSIX;
+		cp->irq_arr[0].irq_flags &= ~CNIC_IRQ_FL_MSIX;
+	}
+	if (!CHIP_IS_E1x(bp))
+		cp->irq_arr[0].status_blk = (void *)bp->cnic_sb.e2_sb;
+	else
+		cp->irq_arr[0].status_blk = (void *)bp->cnic_sb.e1x_sb;
+
+	cp->irq_arr[0].status_blk_num =  bnx2x_cnic_fw_sb_id(bp);
+	cp->irq_arr[0].status_blk_num2 = bnx2x_cnic_igu_sb_id(bp);
+	cp->irq_arr[1].status_blk = bp->def_status_blk;
+	cp->irq_arr[1].status_blk_num = DEF_SB_ID;
+	cp->irq_arr[1].status_blk_num2 = DEF_SB_IGU_ID;
+
+	cp->num_irq = 2;
+}
+
+static int bnx2x_register_cnic(struct net_device *dev, struct cnic_ops *ops,
+			       void *data)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+	struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+
+	if (ops == NULL)
+		return -EINVAL;
+
+	bp->cnic_kwq = kzalloc(PAGE_SIZE, GFP_KERNEL);
+	if (!bp->cnic_kwq)
+		return -ENOMEM;
+
+	bp->cnic_kwq_cons = bp->cnic_kwq;
+	bp->cnic_kwq_prod = bp->cnic_kwq;
+	bp->cnic_kwq_last = bp->cnic_kwq + MAX_SP_DESC_CNT;
+
+	bp->cnic_spq_pending = 0;
+	bp->cnic_kwq_pending = 0;
+
+	bp->cnic_data = data;
+
+	cp->num_irq = 0;
+	cp->drv_state |= CNIC_DRV_STATE_REGD;
+	cp->iro_arr = bp->iro_arr;
+
+	bnx2x_setup_cnic_irq_info(bp);
+
+	rcu_assign_pointer(bp->cnic_ops, ops);
+
+	return 0;
+}
+
+static int bnx2x_unregister_cnic(struct net_device *dev)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+	struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+
+	mutex_lock(&bp->cnic_mutex);
+	cp->drv_state = 0;
+	rcu_assign_pointer(bp->cnic_ops, NULL);
+	mutex_unlock(&bp->cnic_mutex);
+	synchronize_rcu();
+	kfree(bp->cnic_kwq);
+	bp->cnic_kwq = NULL;
+
+	return 0;
+}
+
+struct cnic_eth_dev *bnx2x_cnic_probe(struct net_device *dev)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+	struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+
+	/* If both iSCSI and FCoE are disabled - return NULL in
+	 * order to indicate CNIC that it should not try to work
+	 * with this device.
+	 */
+	if (NO_ISCSI(bp) && NO_FCOE(bp))
+		return NULL;
+
+	cp->drv_owner = THIS_MODULE;
+	cp->chip_id = CHIP_ID(bp);
+	cp->pdev = bp->pdev;
+	cp->io_base = bp->regview;
+	cp->io_base2 = bp->doorbells;
+	cp->max_kwqe_pending = 8;
+	cp->ctx_blk_size = CDU_ILT_PAGE_SZ;
+	cp->ctx_tbl_offset = FUNC_ILT_BASE(BP_FUNC(bp)) +
+			     bnx2x_cid_ilt_lines(bp);
+	cp->ctx_tbl_len = CNIC_ILT_LINES;
+	cp->starting_cid = bnx2x_cid_ilt_lines(bp) * ILT_PAGE_CIDS;
+	cp->drv_submit_kwqes_16 = bnx2x_cnic_sp_queue;
+	cp->drv_ctl = bnx2x_drv_ctl;
+	cp->drv_register_cnic = bnx2x_register_cnic;
+	cp->drv_unregister_cnic = bnx2x_unregister_cnic;
+	cp->fcoe_init_cid = BNX2X_FCOE_ETH_CID;
+	cp->iscsi_l2_client_id =
+		bnx2x_cnic_eth_cl_id(bp, BNX2X_ISCSI_ETH_CL_ID_IDX);
+	cp->iscsi_l2_cid = BNX2X_ISCSI_ETH_CID;
+
+	if (NO_ISCSI_OOO(bp))
+		cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI_OOO;
+
+	if (NO_ISCSI(bp))
+		cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI;
+
+	if (NO_FCOE(bp))
+		cp->drv_state |= CNIC_DRV_STATE_NO_FCOE;
+
+	DP(BNX2X_MSG_SP, "page_size %d, tbl_offset %d, tbl_lines %d, "
+			 "starting cid %d\n",
+	   cp->ctx_blk_size,
+	   cp->ctx_tbl_offset,
+	   cp->ctx_tbl_len,
+	   cp->starting_cid);
+	return cp;
+}
+EXPORT_SYMBOL(bnx2x_cnic_probe);
+
+#endif /* BCM_CNIC */
+