diff options
| author | Laurentiu Tudor <laurentiu.tudor@nxp.com> | 2018-07-04 14:34:20 +0300 |
|---|---|---|
| committer | Ulf Hansson <ulf.hansson@linaro.org> | 2018-07-16 11:21:45 +0200 |
| commit | 5552d7ad596c3fea953f40fef74170ce0760c04d (patch) | |
| tree | fbacb5d80846766beb8a4bf26518e59c9a20f48e /drivers/mmc | |
| parent | f01c3684cf048794dced60297c6fc4b805c6787c (diff) | |
| download | blackbird-op-linux-5552d7ad596c3fea953f40fef74170ce0760c04d.tar.gz blackbird-op-linux-5552d7ad596c3fea953f40fef74170ce0760c04d.zip | |
mmc: sdhci-of-esdhc: set proper dma mask for ls104x chips
SDHCI controller in ls1043a and ls1046a generate 40-bit wide addresses
when doing DMA. Make sure that the corresponding dma mask is correctly
configured.
Context: when enabling smmu on these chips the following problem is
encountered: the smmu input address size is 48 bits so the dma mappings
for sdhci end up 48-bit wide. However, on these chips sdhci only use
40-bits of that address size when doing dma.
So you end up with a 48-bit address translation in smmu but the device
generates transactions with clipped 40-bit addresses, thus smmu context
faults are triggered. Setting up the correct dma mask fixes this
situation.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/host/sdhci-of-esdhc.c | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index c9685c6e4395..9cb7554a463d 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -22,6 +22,7 @@ #include <linux/sys_soc.h> #include <linux/clk.h> #include <linux/ktime.h> +#include <linux/dma-mapping.h> #include <linux/mmc/host.h> #include "sdhci-pltfm.h" #include "sdhci-esdhc.h" @@ -472,6 +473,11 @@ static void esdhc_of_adma_workaround(struct sdhci_host *host, u32 intmask) static int esdhc_of_enable_dma(struct sdhci_host *host) { u32 value; + struct device *dev = mmc_dev(host->mmc); + + if (of_device_is_compatible(dev->of_node, "fsl,ls1043a-esdhc") || + of_device_is_compatible(dev->of_node, "fsl,ls1046a-esdhc")) + dma_set_mask_and_coherent(dev, DMA_BIT_MASK(40)); value = sdhci_readl(host, ESDHC_DMA_SYSCTL); value |= ESDHC_DMA_SNOOP; |
