summaryrefslogtreecommitdiffstats
path: root/drivers/media/dvb/b2c2
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/media/dvb/b2c2
downloadblackbird-op-linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
blackbird-op-linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/media/dvb/b2c2')
-rw-r--r--drivers/media/dvb/b2c2/Kconfig26
-rw-r--r--drivers/media/dvb/b2c2/Makefile6
-rw-r--r--drivers/media/dvb/b2c2/b2c2-common.c214
-rw-r--r--drivers/media/dvb/b2c2/b2c2-usb-core.c549
-rw-r--r--drivers/media/dvb/b2c2/skystar2.c2644
5 files changed, 3439 insertions, 0 deletions
diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig
new file mode 100644
index 000000000000..52596907a0be
--- /dev/null
+++ b/drivers/media/dvb/b2c2/Kconfig
@@ -0,0 +1,26 @@
+config DVB_B2C2_SKYSTAR
+ tristate "B2C2/Technisat Air/Sky/CableStar 2 PCI"
+ depends on DVB_CORE && PCI
+ select DVB_STV0299
+ select DVB_MT352
+ select DVB_MT312
+ select DVB_NXT2002
+ help
+ Support for the Skystar2 PCI DVB card by Technisat, which
+ is equipped with the FlexCopII chipset by B2C2, and
+ for the B2C2/BBTI Air2PC-ATSC card.
+
+ Say Y if you own such a device and want to use it.
+
+config DVB_B2C2_USB
+ tristate "B2C2/Technisat Air/Sky/Cable2PC USB"
+ depends on DVB_CORE && USB && EXPERIMENTAL
+ select DVB_STV0299
+ select DVB_MT352
+ help
+ Support for the Air/Sky/Cable2PC USB DVB device by B2C2. Currently
+ the does nothing, but providing basic function for the used usb
+ protocol.
+
+ Say Y if you own such a device and want to use it.
+
diff --git a/drivers/media/dvb/b2c2/Makefile b/drivers/media/dvb/b2c2/Makefile
new file mode 100644
index 000000000000..9fb1247bfab8
--- /dev/null
+++ b/drivers/media/dvb/b2c2/Makefile
@@ -0,0 +1,6 @@
+obj-b2c2-usb = b2c2-usb-core.o b2c2-common.o
+
+obj-$(CONFIG_DVB_B2C2_SKYSTAR) += skystar2.o
+obj-$(CONFIG_DVB_B2C2_USB) + = b2c2-usb.o
+
+EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
diff --git a/drivers/media/dvb/b2c2/b2c2-common.c b/drivers/media/dvb/b2c2/b2c2-common.c
new file mode 100644
index 000000000000..000d60c405e3
--- /dev/null
+++ b/drivers/media/dvb/b2c2/b2c2-common.c
@@ -0,0 +1,214 @@
+/*
+ * b2c2-common.c - common methods for the B2C2/Technisat SkyStar2 PCI DVB card and
+ * for the B2C2/Technisat Sky/Cable/AirStar USB devices
+ * based on the FlexCopII/FlexCopIII by B2C2, Inc.
+ *
+ * Copyright (C) 2003 Vadim Catana, skystar@moldova.cc
+ *
+ * FIX: DISEQC Tone Burst in flexcop_diseqc_ioctl()
+ * FIX: FULL soft DiSEqC for skystar2 (FlexCopII rev 130) VP310 equipped
+ * Vincenzo Di Massa, hawk.it at tiscalinet.it
+ *
+ * Converted to Linux coding style
+ * Misc reorganization, polishing, restyling
+ * Roberto Ragusa, r.ragusa at libero.it
+ *
+ * Added hardware filtering support,
+ * Niklas Peinecke, peinecke at gdv.uni-hannover.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public License
+ * as published by the Free Software Foundation; either version 2.1
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+#include "stv0299.h"
+#include "mt352.h"
+#include "mt312.h"
+
+static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
+{
+ u8 aclk = 0;
+ u8 bclk = 0;
+
+ if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
+ else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
+ else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
+ else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
+ else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
+ else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
+
+ stv0299_writereg (fe, 0x13, aclk);
+ stv0299_writereg (fe, 0x14, bclk);
+ stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff);
+ stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff);
+ stv0299_writereg (fe, 0x21, (ratio ) & 0xf0);
+
+ return 0;
+}
+
+static int samsung_tbmu24112_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+ u8 buf[4];
+ u32 div;
+ struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
+// struct adapter* adapter = (struct adapter*) fe->dvb->priv;
+
+ div = params->frequency / 125;
+
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = div & 0xff;
+ buf[2] = 0x84; // 0xC4
+ buf[3] = 0x08;
+
+ if (params->frequency < 1500000) buf[3] |= 0x10;
+
+// if (i2c_transfer (&adapter->i2c_adap, &msg, 1) != 1) return -EIO;
+ return 0;
+}
+
+static u8 samsung_tbmu24112_inittab[] = {
+ 0x01, 0x15,
+ 0x02, 0x30,
+ 0x03, 0x00,
+ 0x04, 0x7D,
+ 0x05, 0x35,
+ 0x06, 0x02,
+ 0x07, 0x00,
+ 0x08, 0xC3,
+ 0x0C, 0x00,
+ 0x0D, 0x81,
+ 0x0E, 0x23,
+ 0x0F, 0x12,
+ 0x10, 0x7E,
+ 0x11, 0x84,
+ 0x12, 0xB9,
+ 0x13, 0x88,
+ 0x14, 0x89,
+ 0x15, 0xC9,
+ 0x16, 0x00,
+ 0x17, 0x5C,
+ 0x18, 0x00,
+ 0x19, 0x00,
+ 0x1A, 0x00,
+ 0x1C, 0x00,
+ 0x1D, 0x00,
+ 0x1E, 0x00,
+ 0x1F, 0x3A,
+ 0x20, 0x2E,
+ 0x21, 0x80,
+ 0x22, 0xFF,
+ 0x23, 0xC1,
+ 0x28, 0x00,
+ 0x29, 0x1E,
+ 0x2A, 0x14,
+ 0x2B, 0x0F,
+ 0x2C, 0x09,
+ 0x2D, 0x05,
+ 0x31, 0x1F,
+ 0x32, 0x19,
+ 0x33, 0xFE,
+ 0x34, 0x93,
+ 0xff, 0xff,
+};
+
+static struct stv0299_config samsung_tbmu24112_config = {
+ .demod_address = 0x68,
+ .inittab = samsung_tbmu24112_inittab,
+ .mclk = 88000000UL,
+ .invert = 0,
+ .enhanced_tuning = 0,
+ .skip_reinit = 0,
+ .lock_output = STV0229_LOCKOUTPUT_LK,
+ .volt13_op0_op1 = STV0299_VOLT13_OP1,
+ .min_delay_ms = 100,
+ .set_symbol_rate = samsung_tbmu24112_set_symbol_rate,
+ .pll_set = samsung_tbmu24112_pll_set,
+};
+
+
+
+
+
+static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe)
+{
+ static u8 mt352_clock_config [] = { 0x89, 0x10, 0x2d };
+ static u8 mt352_reset [] = { 0x50, 0x80 };
+ static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
+ static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 };
+ static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
+
+ mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
+ udelay(2000);
+ mt352_write(fe, mt352_reset, sizeof(mt352_reset));
+ mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
+
+ mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
+ mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
+
+ return 0;
+}
+
+static int samsung_tdtc9251dh0_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pllbuf)
+{
+ u32 div;
+ unsigned char bs = 0;
+
+ #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */
+ div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
+
+ if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09;
+ if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a;
+ if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08;
+
+ pllbuf[0] = 0xc2; // Note: non-linux standard PLL i2c address
+ pllbuf[1] = div >> 8;
+ pllbuf[2] = div & 0xff;
+ pllbuf[3] = 0xcc;
+ pllbuf[4] = bs;
+
+ return 0;
+}
+
+static struct mt352_config samsung_tdtc9251dh0_config = {
+
+ .demod_address = 0x0f,
+ .demod_init = samsung_tdtc9251dh0_demod_init,
+ .pll_set = samsung_tdtc9251dh0_pll_set,
+};
+
+static int skystar23_samsung_tbdu18132_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+ u8 buf[4];
+ u32 div;
+ struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
+// struct adapter* adapter = (struct adapter*) fe->dvb->priv;
+
+ div = (params->frequency + (125/2)) / 125;
+
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = (div >> 0) & 0xff;
+ buf[2] = 0x84 | ((div >> 10) & 0x60);
+ buf[3] = 0x80;
+
+ if (params->frequency < 1550000)
+ buf[3] |= 0x02;
+
+ //if (i2c_transfer (&adapter->i2c_adap, &msg, 1) != 1) return -EIO;
+ return 0;
+}
+
+static struct mt312_config skystar23_samsung_tbdu18132_config = {
+
+ .demod_address = 0x0e,
+ .pll_set = skystar23_samsung_tbdu18132_pll_set,
+};
diff --git a/drivers/media/dvb/b2c2/b2c2-usb-core.c b/drivers/media/dvb/b2c2/b2c2-usb-core.c
new file mode 100644
index 000000000000..9306da046c91
--- /dev/null
+++ b/drivers/media/dvb/b2c2/b2c2-usb-core.c
@@ -0,0 +1,549 @@
+/*
+ * Copyright (C) 2004 Patrick Boettcher <patrick.boettcher@desy.de>,
+ * Luca Bertagnolio <>,
+ *
+ * based on information provided by John Jurrius from BBTI, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/usb.h>
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+#include <linux/version.h>
+
+#include "dmxdev.h"
+#include "dvb_demux.h"
+#include "dvb_filter.h"
+#include "dvb_net.h"
+#include "dvb_frontend.h"
+
+/* debug */
+#define dprintk(level,args...) \
+ do { if ((debug & level)) { printk(args); } } while (0)
+#define debug_dump(b,l) if (debug) {\
+ int i; deb_xfer("%s: %d > ",__FUNCTION__,l); \
+ for (i = 0; i < l; i++) deb_xfer("%02x ", b[i]); \
+ deb_xfer("\n");\
+}
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info,ts=2,ctrl=4 (or-able)).");
+
+#define deb_info(args...) dprintk(0x01,args)
+#define deb_ts(args...) dprintk(0x02,args)
+#define deb_ctrl(args...) dprintk(0x04,args)
+
+/* Version information */
+#define DRIVER_VERSION "0.0"
+#define DRIVER_DESC "Driver for B2C2/Technisat Air/Cable/Sky-2-PC USB devices"
+#define DRIVER_AUTHOR "Patrick Boettcher, patrick.boettcher@desy.de"
+
+/* transfer parameters */
+#define B2C2_USB_FRAMES_PER_ISO 4
+#define B2C2_USB_NUM_ISO_URB 4 /* TODO check out a good value */
+
+#define B2C2_USB_CTRL_PIPE_IN usb_rcvctrlpipe(b2c2->udev,0)
+#define B2C2_USB_CTRL_PIPE_OUT usb_sndctrlpipe(b2c2->udev,0)
+#define B2C2_USB_DATA_PIPE usb_rcvisocpipe(b2c2->udev,0x81)
+
+struct usb_b2c2_usb {
+ struct usb_device *udev;
+ struct usb_interface *uintf;
+
+ u8 *iso_buffer;
+ int buffer_size;
+ dma_addr_t iso_dma_handle;
+ struct urb *iso_urb[B2C2_USB_NUM_ISO_URB];
+};
+
+
+/*
+ * USB
+ * 10 90 34 12 78 56 04 00
+ * usb_control_msg(udev, usb_sndctrlpipe(udev,0),
+ * 0x90,
+ * 0x10,
+ * 0x1234,
+ * 0x5678,
+ * buf,
+ * 4,
+ * 5*HZ);
+ *
+ * extern int usb_control_msg(struct usb_device *dev, unsigned int pipe,
+ * __u8 request,
+ * __u8 requesttype,
+ * __u16 value,
+ * __u16 index,
+ * void *data,
+ * __u16 size,
+ * int timeout);
+ *
+ */
+
+/* request types */
+typedef enum {
+
+/* something is wrong with this part
+ RTYPE_READ_DW = (1 << 6),
+ RTYPE_WRITE_DW_1 = (3 << 6),
+ RTYPE_READ_V8_MEMORY = (6 << 6),
+ RTYPE_WRITE_V8_MEMORY = (7 << 6),
+ RTYPE_WRITE_V8_FLASH = (8 << 6),
+ RTYPE_GENERIC = (9 << 6),
+*/
+ RTYPE_READ_DW = (3 << 6),
+ RTYPE_WRITE_DW_1 = (1 << 6),
+
+ RTYPE_READ_V8_MEMORY = (6 << 6),
+ RTYPE_WRITE_V8_MEMORY = (7 << 6),
+ RTYPE_WRITE_V8_FLASH = (8 << 6),
+ RTYPE_GENERIC = (9 << 6),
+} b2c2_usb_request_type_t;
+
+/* request */
+typedef enum {
+ B2C2_USB_WRITE_V8_MEM = 0x04,
+ B2C2_USB_READ_V8_MEM = 0x05,
+ B2C2_USB_READ_REG = 0x08,
+ B2C2_USB_WRITE_REG = 0x0A,
+/* B2C2_USB_WRITEREGLO = 0x0A, */
+ B2C2_USB_WRITEREGHI = 0x0B,
+ B2C2_USB_FLASH_BLOCK = 0x10,
+ B2C2_USB_I2C_REQUEST = 0x11,
+ B2C2_USB_UTILITY = 0x12,
+} b2c2_usb_request_t;
+
+/* function definition for I2C_REQUEST */
+typedef enum {
+ USB_FUNC_I2C_WRITE = 0x01,
+ USB_FUNC_I2C_MULTIWRITE = 0x02,
+ USB_FUNC_I2C_READ = 0x03,
+ USB_FUNC_I2C_REPEATWRITE = 0x04,
+ USB_FUNC_GET_DESCRIPTOR = 0x05,
+ USB_FUNC_I2C_REPEATREAD = 0x06,
+/* DKT 020208 - add this to support special case of DiSEqC */
+ USB_FUNC_I2C_CHECKWRITE = 0x07,
+ USB_FUNC_I2C_CHECKRESULT = 0x08,
+} b2c2_usb_i2c_function_t;
+
+/*
+ * function definition for UTILITY request 0x12
+ * DKT 020304 - new utility function
+ */
+typedef enum {
+ UTILITY_SET_FILTER = 0x01,
+ UTILITY_DATA_ENABLE = 0x02,
+ UTILITY_FLEX_MULTIWRITE = 0x03,
+ UTILITY_SET_BUFFER_SIZE = 0x04,
+ UTILITY_FLEX_OPERATOR = 0x05,
+ UTILITY_FLEX_RESET300_START = 0x06,
+ UTILITY_FLEX_RESET300_STOP = 0x07,
+ UTILITY_FLEX_RESET300 = 0x08,
+ UTILITY_SET_ISO_SIZE = 0x09,
+ UTILITY_DATA_RESET = 0x0A,
+ UTILITY_GET_DATA_STATUS = 0x10,
+ UTILITY_GET_V8_REG = 0x11,
+/* DKT 020326 - add function for v1.14 */
+ UTILITY_SRAM_WRITE = 0x12,
+ UTILITY_SRAM_READ = 0x13,
+ UTILITY_SRAM_TESTFILL = 0x14,
+ UTILITY_SRAM_TESTSET = 0x15,
+ UTILITY_SRAM_TESTVERIFY = 0x16,
+} b2c2_usb_utility_function_t;
+
+#define B2C2_WAIT_FOR_OPERATION_RW 1 // 1 s
+#define B2C2_WAIT_FOR_OPERATION_RDW 3 // 3 s
+#define B2C2_WAIT_FOR_OPERATION_WDW 1 // 1 s
+
+#define B2C2_WAIT_FOR_OPERATION_V8READ 3 // 3 s
+#define B2C2_WAIT_FOR_OPERATION_V8WRITE 3 // 3 s
+#define B2C2_WAIT_FOR_OPERATION_V8FLASH 3 // 3 s
+
+/* JLP 111700: we will include the 1 bit gap between the upper and lower 3 bits
+ * in the IBI address, to make the V8 code simpler.
+ * PCI ADDRESS FORMAT: 0x71C -> 0000 0111 0001 1100 (these are the six bits used)
+ * in general: 0000 0HHH 000L LL00
+ * IBI ADDRESS FORMAT: RHHH BLLL
+ *
+ * where R is the read(1)/write(0) bit, B is the busy bit
+ * and HHH and LLL are the two sets of three bits from the PCI address.
+ */
+#define B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(usPCI) (u8) (((usPCI >> 2) & 0x07) + ((usPCI >> 4) & 0x70))
+#define B2C2_FLEX_INTERNALADDR_TO_PCIOFFSET(ucAddr) (u16) (((ucAddr & 0x07) << 2) + ((ucAddr & 0x70) << 4))
+
+/*
+ * DKT 020228 - forget about this VENDOR_BUFFER_SIZE, read and write register
+ * deal with DWORD or 4 bytes, that should be should from now on
+ */
+static u32 b2c2_usb_read_dw(struct usb_b2c2_usb *b2c2, u16 wRegOffsPCI)
+{
+ u32 val;
+ u16 wAddress = B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(wRegOffsPCI) | 0x0080;
+ int len = usb_control_msg(b2c2->udev,
+ B2C2_USB_CTRL_PIPE_IN,
+ B2C2_USB_READ_REG,
+ RTYPE_READ_DW,
+ wAddress,
+ 0,
+ &val,
+ sizeof(u32),
+ B2C2_WAIT_FOR_OPERATION_RDW * 1000);
+
+ if (len != sizeof(u32)) {
+ err("error while reading dword from %d (%d).",wAddress,wRegOffsPCI);
+ return -EIO;
+ } else
+ return val;
+}
+
+/*
+ * DKT 020228 - from now on, we don't support anything older than firm 1.00
+ * I eliminated the write register as a 2 trip of writing hi word and lo word
+ * and force this to write only 4 bytes at a time.
+ * NOTE: this should work with all the firmware from 1.00 and newer
+ */
+static int b2c2_usb_write_dw(struct usb_b2c2_usb *b2c2, u16 wRegOffsPCI, u32 val)
+{
+ u16 wAddress = B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(wRegOffsPCI);
+ int len = usb_control_msg(b2c2->udev,
+ B2C2_USB_CTRL_PIPE_OUT,
+ B2C2_USB_WRITE_REG,
+ RTYPE_WRITE_DW_1,
+ wAddress,
+ 0,
+ &val,
+ sizeof(u32),
+ B2C2_WAIT_FOR_OPERATION_RDW * 1000);
+
+ if (len != sizeof(u32)) {
+ err("error while reading dword from %d (%d).",wAddress,wRegOffsPCI);
+ return -EIO;
+ } else
+ return 0;
+}
+
+/*
+ * DKT 010817 - add support for V8 memory read/write and flash update
+ */
+static int b2c2_usb_v8_memory_req(struct usb_b2c2_usb *b2c2,
+ b2c2_usb_request_t req, u8 page, u16 wAddress,
+ u16 buflen, u8 *pbBuffer)
+{
+ u8 dwRequestType;
+ u16 wIndex;
+ int nWaitTime,pipe,len;
+
+ wIndex = page << 8;
+
+ switch (req) {
+ case B2C2_USB_READ_V8_MEM:
+ nWaitTime = B2C2_WAIT_FOR_OPERATION_V8READ;
+ dwRequestType = (u8) RTYPE_READ_V8_MEMORY;
+ pipe = B2C2_USB_CTRL_PIPE_IN;
+ break;
+ case B2C2_USB_WRITE_V8_MEM:
+ wIndex |= pbBuffer[0];
+ nWaitTime = B2C2_WAIT_FOR_OPERATION_V8WRITE;
+ dwRequestType = (u8) RTYPE_WRITE_V8_MEMORY;
+ pipe = B2C2_USB_CTRL_PIPE_OUT;
+ break;
+ case B2C2_USB_FLASH_BLOCK:
+ nWaitTime = B2C2_WAIT_FOR_OPERATION_V8FLASH;
+ dwRequestType = (u8) RTYPE_WRITE_V8_FLASH;
+ pipe = B2C2_USB_CTRL_PIPE_OUT;
+ break;
+ default:
+ deb_info("unsupported request for v8_mem_req %x.\n",req);
+ return -EINVAL;
+ }
+ len = usb_control_msg(b2c2->udev,pipe,
+ req,
+ dwRequestType,
+ wAddress,
+ wIndex,
+ pbBuffer,
+ buflen,
+ nWaitTime * 1000);
+ return len == buflen ? 0 : -EIO;
+}
+
+static int b2c2_usb_i2c_req(struct usb_b2c2_usb *b2c2,
+ b2c2_usb_request_t req, b2c2_usb_i2c_function_t func,
+ u8 port, u8 chipaddr, u8 addr, u8 buflen, u8 *buf)
+{
+ u16 wValue, wIndex;
+ int nWaitTime,pipe,len;
+ u8 dwRequestType;
+
+ switch (func) {
+ case USB_FUNC_I2C_WRITE:
+ case USB_FUNC_I2C_MULTIWRITE:
+ case USB_FUNC_I2C_REPEATWRITE:
+ /* DKT 020208 - add this to support special case of DiSEqC */
+ case USB_FUNC_I2C_CHECKWRITE:
+ pipe = B2C2_USB_CTRL_PIPE_OUT;
+ nWaitTime = 2;
+ dwRequestType = (u8) RTYPE_GENERIC;
+ break;
+ case USB_FUNC_I2C_READ:
+ case USB_FUNC_I2C_REPEATREAD:
+ pipe = B2C2_USB_CTRL_PIPE_IN;
+ nWaitTime = 2;
+ dwRequestType = (u8) RTYPE_GENERIC;
+ break;
+ default:
+ deb_info("unsupported function for i2c_req %x\n",func);
+ return -EINVAL;
+ }
+ wValue = (func << 8 ) | port;
+ wIndex = (chipaddr << 8 ) | addr;
+
+ len = usb_control_msg(b2c2->udev,pipe,
+ req,
+ dwRequestType,
+ addr,
+ wIndex,
+ buf,
+ buflen,
+ nWaitTime * 1000);
+ return len == buflen ? 0 : -EIO;
+}
+
+int static b2c2_usb_utility_req(struct usb_b2c2_usb *b2c2, int set,
+ b2c2_usb_utility_function_t func, u8 extra, u16 wIndex,
+ u16 buflen, u8 *pvBuffer)
+{
+ u16 wValue;
+ int nWaitTime = 2,
+ pipe = set ? B2C2_USB_CTRL_PIPE_OUT : B2C2_USB_CTRL_PIPE_IN,
+ len;
+
+ wValue = (func << 8) | extra;
+
+ len = usb_control_msg(b2c2->udev,pipe,
+ B2C2_USB_UTILITY,
+ (u8) RTYPE_GENERIC,
+ wValue,
+ wIndex,
+ pvBuffer,
+ buflen,
+ nWaitTime * 1000);
+ return len == buflen ? 0 : -EIO;
+}
+
+
+
+static void b2c2_dumpfourreg(struct usb_b2c2_usb *b2c2, u16 offs)
+{
+ u32 r0,r1,r2,r3;
+ r0 = r1 = r2 = r3 = 0;
+ r0 = b2c2_usb_read_dw(b2c2,offs);
+ r1 = b2c2_usb_read_dw(b2c2,offs + 0x04);
+ r2 = b2c2_usb_read_dw(b2c2,offs + 0x08);
+ r3 = b2c2_usb_read_dw(b2c2,offs + 0x0c);
+ deb_ctrl("dump: offset: %03x, %08x, %08x, %08x, %08x\n",offs,r0,r1,r2,r3);
+}
+
+static void b2c2_urb_complete(struct urb *urb, struct pt_regs *ptregs)
+{
+ struct usb_b2c2_usb *b2c2 = urb->context;
+ deb_ts("urb completed, bufsize: %d\n",urb->transfer_buffer_length);
+
+// urb_submit_urb(urb,GFP_ATOMIC); enable for real action
+}
+
+static void b2c2_exit_usb(struct usb_b2c2_usb *b2c2)
+{
+ int i;
+ for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++)
+ if (b2c2->iso_urb[i] != NULL) { /* not sure about unlink_urb and iso-urbs TODO */
+ deb_info("unlinking/killing urb no. %d\n",i);
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,7)
+ usb_unlink_urb(b2c2->iso_urb[i]);
+#else
+ usb_kill_urb(b2c2->iso_urb[i]);
+#endif
+ usb_free_urb(b2c2->iso_urb[i]);
+ }
+
+ if (b2c2->iso_buffer != NULL)
+ pci_free_consistent(NULL,b2c2->buffer_size, b2c2->iso_buffer, b2c2->iso_dma_handle);
+
+}
+
+static int b2c2_init_usb(struct usb_b2c2_usb *b2c2)
+{
+ u16 frame_size = le16_to_cpu(b2c2->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize);
+ int bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO * frame_size,i,j,ret;
+ int buffer_offset = 0;
+
+ deb_info("creating %d iso-urbs with %d frames each of %d bytes size = %d.\n",
+ B2C2_USB_NUM_ISO_URB, B2C2_USB_FRAMES_PER_ISO, frame_size,bufsize);
+
+ b2c2->iso_buffer = pci_alloc_consistent(NULL,bufsize,&b2c2->iso_dma_handle);
+ if (b2c2->iso_buffer == NULL)
+ return -ENOMEM;
+ memset(b2c2->iso_buffer, 0, bufsize);
+ b2c2->buffer_size = bufsize;
+
+ /* creating iso urbs */
+ for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++)
+ if (!(b2c2->iso_urb[i] = usb_alloc_urb(B2C2_USB_FRAMES_PER_ISO,GFP_ATOMIC))) {
+ ret = -ENOMEM;
+ goto urb_error;
+ }
+ /* initialising and submitting iso urbs */
+ for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) {
+ int frame_offset = 0;
+ struct urb *urb = b2c2->iso_urb[i];
+ deb_info("initializing and submitting urb no. %d (buf_offset: %d).\n",i,buffer_offset);
+
+ urb->dev = b2c2->udev;
+ urb->context = b2c2;
+ urb->complete = b2c2_urb_complete;
+ urb->pipe = B2C2_USB_DATA_PIPE;
+ urb->transfer_flags = URB_ISO_ASAP;
+ urb->interval = 1;
+ urb->number_of_packets = B2C2_USB_FRAMES_PER_ISO;
+ urb->transfer_buffer_length = frame_size * B2C2_USB_FRAMES_PER_ISO;
+ urb->transfer_buffer = b2c2->iso_buffer + buffer_offset;
+
+ buffer_offset += frame_size * B2C2_USB_FRAMES_PER_ISO;
+ for (j = 0; j < B2C2_USB_FRAMES_PER_ISO; j++) {
+ deb_info("urb no: %d, frame: %d, frame_offset: %d\n",i,j,frame_offset);
+ urb->iso_frame_desc[j].offset = frame_offset;
+ urb->iso_frame_desc[j].length = frame_size;
+ frame_offset += frame_size;
+ }
+
+ if ((ret = usb_submit_urb(b2c2->iso_urb[i],GFP_ATOMIC))) {
+ err("submitting urb %d failed with %d.",i,ret);
+ goto urb_error;
+ }
+ deb_info("submitted urb no. %d.\n",i);
+ }
+
+ ret = 0;
+ goto success;
+urb_error:
+ b2c2_exit_usb(b2c2);
+success:
+ return ret;
+}
+
+static int b2c2_usb_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct usb_b2c2_usb *b2c2 = NULL;
+ int ret;
+
+ b2c2 = kmalloc(sizeof(struct usb_b2c2_usb),GFP_KERNEL);
+ if (b2c2 == NULL) {
+ err("no memory");
+ return -ENOMEM;
+ }
+ b2c2->udev = udev;
+ b2c2->uintf = intf;
+
+ /* use the alternate setting with the larges buffer */
+ usb_set_interface(udev,0,1);
+
+ if ((ret = b2c2_init_usb(b2c2)))
+ goto usb_init_error;
+
+ usb_set_intfdata(intf,b2c2);
+
+ switch (udev->speed) {
+ case USB_SPEED_LOW:
+ err("cannot handle USB speed because it is to sLOW.");
+ break;
+ case USB_SPEED_FULL:
+ info("running at FULL speed.");
+ break;
+ case USB_SPEED_HIGH:
+ info("running at HIGH speed.");
+ break;
+ case USB_SPEED_UNKNOWN: /* fall through */
+ default:
+ err("cannot handle USB speed because it is unkown.");
+ break;
+ }
+
+ b2c2_dumpfourreg(b2c2,0x200);
+ b2c2_dumpfourreg(b2c2,0x300);
+ b2c2_dumpfourreg(b2c2,0x400);
+ b2c2_dumpfourreg(b2c2,0x700);
+
+
+ if (ret == 0)
+ info("%s successfully initialized and connected.",DRIVER_DESC);
+ else
+ info("%s error while loading driver (%d)",DRIVER_DESC,ret);
+
+ ret = 0;
+ goto success;
+
+usb_init_error:
+ kfree(b2c2);
+success:
+ return ret;
+}
+
+static void b2c2_usb_disconnect(struct usb_interface *intf)
+{
+ struct usb_b2c2_usb *b2c2 = usb_get_intfdata(intf);
+ usb_set_intfdata(intf,NULL);
+ if (b2c2 != NULL) {
+ b2c2_exit_usb(b2c2);
+ kfree(b2c2);
+ }
+ info("%s successfully deinitialized and disconnected.",DRIVER_DESC);
+
+}
+
+static struct usb_device_id b2c2_usb_table [] = {
+ { USB_DEVICE(0x0af7, 0x0101) }
+};
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver b2c2_usb_driver = {
+ .owner = THIS_MODULE,
+ .name = "dvb_b2c2_usb",
+ .probe = b2c2_usb_probe,
+ .disconnect = b2c2_usb_disconnect,
+ .id_table = b2c2_usb_table,
+};
+
+/* module stuff */
+static int __init b2c2_usb_init(void)
+{
+ int result;
+ if ((result = usb_register(&b2c2_usb_driver))) {
+ err("usb_register failed. Error number %d",result);
+ return result;
+ }
+
+ return 0;
+}
+
+static void __exit b2c2_usb_exit(void)
+{
+ /* deregister this driver from the USB subsystem */
+ usb_deregister(&b2c2_usb_driver);
+}
+
+module_init (b2c2_usb_init);
+module_exit (b2c2_usb_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(usb, b2c2_usb_table);
diff --git a/drivers/media/dvb/b2c2/skystar2.c b/drivers/media/dvb/b2c2/skystar2.c
new file mode 100644
index 000000000000..336c178fcd5f
--- /dev/null
+++ b/drivers/media/dvb/b2c2/skystar2.c
@@ -0,0 +1,2644 @@
+/*
+ * skystar2.c - driver for the Technisat SkyStar2 PCI DVB card
+ * based on the FlexCopII by B2C2,Inc.
+ *
+ * Copyright (C) 2003 Vadim Catana, skystar@moldova.cc
+ *
+ * FIX: DISEQC Tone Burst in flexcop_diseqc_ioctl()
+ * FIX: FULL soft DiSEqC for skystar2 (FlexCopII rev 130) VP310 equipped
+ * Vincenzo Di Massa, hawk.it at tiscalinet.it
+ *
+ * Converted to Linux coding style
+ * Misc reorganization, polishing, restyling
+ * Roberto Ragusa, skystar2-c5b8 at robertoragusa dot it
+ *
+ * Added hardware filtering support,
+ * Niklas Peinecke, peinecke at gdv.uni-hannover.de
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public License
+ * as published by the Free Software Foundation; either version 2.1
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/version.h>
+
+#include <asm/io.h>
+
+#include "dvb_frontend.h"
+
+#include <linux/dvb/frontend.h>
+#include <linux/dvb/dmx.h>
+#include "dvb_demux.h"
+#include "dmxdev.h"
+#include "dvb_filter.h"
+#include "dvbdev.h"
+#include "demux.h"
+#include "dvb_net.h"
+#include "stv0299.h"
+#include "mt352.h"
+#include "mt312.h"
+#include "nxt2002.h"
+
+static int debug;
+static int enable_hw_filters = 2;
+
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Set debugging level (0 = default, 1 = most messages, 2 = all messages).");
+module_param(enable_hw_filters, int, 0444);
+MODULE_PARM_DESC(enable_hw_filters, "enable hardware filters: supported values: 0 (none), 1, 2");
+
+#define dprintk(x...) do { if (debug>=1) printk(x); } while (0)
+#define ddprintk(x...) do { if (debug>=2) printk(x); } while (0)
+
+#define SIZE_OF_BUF_DMA1 0x3ac00
+#define SIZE_OF_BUF_DMA2 0x758
+
+#define MAX_N_HW_FILTERS (6+32)
+#define N_PID_SLOTS 256
+
+struct dmaq {
+ u32 bus_addr;
+ u32 head;
+ u32 tail;
+ u32 buffer_size;
+ u8 *buffer;
+};
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,9)
+#define __iomem
+#endif
+
+struct adapter {
+ struct pci_dev *pdev;
+
+ u8 card_revision;
+ u32 b2c2_revision;
+ u32 pid_filter_max;
+ u32 mac_filter_max;
+ u32 irq;
+ void __iomem *io_mem;
+ unsigned long io_port;
+ u8 mac_addr[8];
+ u32 dw_sram_type;
+
+ struct dvb_adapter *dvb_adapter;
+ struct dvb_demux demux;
+ struct dmxdev dmxdev;
+ struct dmx_frontend hw_frontend;
+ struct dmx_frontend mem_frontend;
+ struct i2c_adapter i2c_adap;
+ struct dvb_net dvbnet;
+
+ struct semaphore i2c_sem;
+
+ struct dmaq dmaq1;
+ struct dmaq dmaq2;
+
+ u32 dma_ctrl;
+ u32 dma_status;
+
+ int capturing;
+
+ spinlock_t lock;
+
+ int useable_hw_filters;
+ u16 hw_pids[MAX_N_HW_FILTERS];
+ u16 pid_list[N_PID_SLOTS];
+ int pid_rc[N_PID_SLOTS]; // ref counters for the pids
+ int pid_count;
+ int whole_bandwidth_count;
+ u32 mac_filter;
+
+ struct dvb_frontend* fe;
+ int (*fe_sleep)(struct dvb_frontend* fe);
+};
+
+#define write_reg_dw(adapter,reg,value) writel(value, adapter->io_mem + reg)
+#define read_reg_dw(adapter,reg) readl(adapter->io_mem + reg)
+
+static void write_reg_bitfield(struct adapter *adapter, u32 reg, u32 zeromask, u32 orvalue)
+{
+ u32 tmp;
+
+ tmp = read_reg_dw(adapter, reg);
+ tmp = (tmp & ~zeromask) | orvalue;
+ write_reg_dw(adapter, reg, tmp);
+}
+
+/* i2c functions */
+static int i2c_main_write_for_flex2(struct adapter *adapter, u32 command, u8 *buf, int retries)
+{
+ int i;
+ u32 value;
+
+ write_reg_dw(adapter, 0x100, 0);
+ write_reg_dw(adapter, 0x100, command);
+
+ for (i = 0; i < retries; i++) {
+ value = read_reg_dw(adapter, 0x100);
+
+ if ((value & 0x40000000) == 0) {
+ if ((value & 0x81000000) == 0x80000000) {
+ if (buf != 0)
+ *buf = (value >> 0x10) & 0xff;
+
+ return 1;
+ }
+ } else {
+ write_reg_dw(adapter, 0x100, 0);
+ write_reg_dw(adapter, 0x100, command);
+ }
+ }
+
+ return 0;
+}
+
+/* device = 0x10000000 for tuner, 0x20000000 for eeprom */
+static void i2c_main_setup(u32 device, u32 chip_addr, u8 op, u8 addr, u32 value, u32 len, u32 *command)
+{
+ *command = device | ((len - 1) << 26) | (value << 16) | (addr << 8) | chip_addr;
+
+ if (op != 0)
+ *command = *command | 0x03000000;
+ else
+ *command = *command | 0x01000000;
+}
+
+static int flex_i2c_read4(struct adapter *adapter, u32 device, u32 chip_addr, u16 addr, u8 *buf, u8 len)
+{
+ u32 command;
+ u32 value;
+
+ int result, i;
+
+ i2c_main_setup(device, chip_addr, 1, addr, 0, len, &command);
+
+ result = i2c_main_write_for_flex2(adapter, command, buf, 100000);
+
+ if ((result & 0xff) != 0) {
+ if (len > 1) {
+ value = read_reg_dw(adapter, 0x104);
+
+ for (i = 1; i < len; i++) {
+ buf[i] = value & 0xff;
+ value = value >> 8;
+ }
+ }
+ }
+
+ return result;
+}
+
+static int flex_i2c_write4(struct adapter *adapter, u32 device, u32 chip_addr, u32 addr, u8 *buf, u8 len)
+{
+ u32 command;
+ u32 value;
+ int i;
+
+ if (len > 1) {
+ value = 0;
+
+ for (i = len; i > 1; i--) {
+ value = value << 8;
+ value = value | buf[i - 1];
+ }
+
+ write_reg_dw(adapter, 0x104, value);
+ }
+
+ i2c_main_setup(device, chip_addr, 0, addr, buf[0], len, &command);
+
+ return i2c_main_write_for_flex2(adapter, command, NULL, 100000);
+}
+
+static void fixchipaddr(u32 device, u32 bus, u32 addr, u32 *ret)
+{
+ if (device == 0x20000000)
+ *ret = bus | ((addr >> 8) & 3);
+ else
+ *ret = bus;
+}
+
+static u32 flex_i2c_read(struct adapter *adapter, u32 device, u32 bus, u32 addr, u8 *buf, u32 len)
+{
+ u32 chipaddr;
+ u32 bytes_to_transfer;
+ u8 *start;
+
+ ddprintk("%s:\n", __FUNCTION__);
+
+ start = buf;
+
+ while (len != 0) {
+ bytes_to_transfer = len;
+
+ if (bytes_to_transfer > 4)
+ bytes_to_transfer = 4;
+
+ fixchipaddr(device, bus, addr, &chipaddr);
+
+ if (flex_i2c_read4(adapter, device, chipaddr, addr, buf, bytes_to_transfer) == 0)
+ return buf - start;
+
+ buf = buf + bytes_to_transfer;
+ addr = addr + bytes_to_transfer;
+ len = len - bytes_to_transfer;
+ };
+
+ return buf - start;
+}
+
+static u32 flex_i2c_write(struct adapter *adapter, u32 device, u32 bus, u32 addr, u8 *buf, u32 len)
+{
+ u32 chipaddr;
+ u32 bytes_to_transfer;
+ u8 *start;
+
+ ddprintk("%s:\n", __FUNCTION__);
+
+ start = buf;
+
+ while (len != 0) {
+ bytes_to_transfer = len;
+
+ if (bytes_to_transfer > 4)
+ bytes_to_transfer = 4;
+
+ fixchipaddr(device, bus, addr, &chipaddr);
+
+ if (flex_i2c_write4(adapter, device, chipaddr, addr, buf, bytes_to_transfer) == 0)
+ return buf - start;
+
+ buf = buf + bytes_to_transfer;
+ addr = addr + bytes_to_transfer;
+ len = len - bytes_to_transfer;
+ }
+
+ return buf - start;
+}
+
+static int master_xfer(struct i2c_adapter* adapter, struct i2c_msg *msgs, int num)
+{
+ struct adapter *tmp = i2c_get_adapdata(adapter);
+ int i, ret = 0;
+
+ if (down_interruptible(&tmp->i2c_sem))
+ return -ERESTARTSYS;
+
+ ddprintk("%s: %d messages to transfer\n", __FUNCTION__, num);
+
+ for (i = 0; i < num; i++) {
+ ddprintk("message %d: flags=0x%x, addr=0x%x, buf=0x%x, len=%d \n", i,
+ msgs[i].flags, msgs[i].addr, msgs[i].buf[0], msgs[i].len);
+ }
+
+ // read command
+ if ((num == 2) && (msgs[0].flags == 0) && (msgs[1].flags == I2C_M_RD) && (msgs[0].buf != NULL) && (msgs[1].buf != NULL)) {
+
+ ret = flex_i2c_read(tmp, 0x10000000, msgs[0].addr, msgs[0].buf[0], msgs[1].buf, msgs[1].len);
+
+ up(&tmp->i2c_sem);
+
+ if (ret != msgs[1].len) {
+ dprintk("%s: read error !\n", __FUNCTION__);
+
+ for (i = 0; i < 2; i++) {
+ dprintk("message %d: flags=0x%x, addr=0x%x, buf=0x%x, len=%d \n", i,
+ msgs[i].flags, msgs[i].addr, msgs[i].buf[0], msgs[i].len);
+ }
+
+ return -EREMOTEIO;
+ }
+
+ return num;
+ }
+ // write command
+ for (i = 0; i < num; i++) {
+
+ if ((msgs[i].flags != 0) || (msgs[i].buf == NULL) || (msgs[i].len < 2))
+ return -EINVAL;
+
+ ret = flex_i2c_write(tmp, 0x10000000, msgs[i].addr, msgs[i].buf[0], &msgs[i].buf[1], msgs[i].len - 1);
+
+ up(&tmp->i2c_sem);
+
+ if (ret != msgs[0].len - 1) {
+ dprintk("%s: write error %i !\n", __FUNCTION__, ret);
+
+ dprintk("message %d: flags=0x%x, addr=0x%x, buf[0]=0x%x, len=%d \n", i,
+ msgs[i].flags, msgs[i].addr, msgs[i].buf[0], msgs[i].len);
+
+ return -EREMOTEIO;
+ }
+
+ return num;
+ }
+
+ printk("%s: unknown command format !\n", __FUNCTION__);
+
+ return -EINVAL;
+}
+
+/* SRAM (Skystar2 rev2.3 has one "ISSI IS61LV256" chip on board,
+ but it seems that FlexCopII can work with more than one chip) */
+static void sram_set_net_dest(struct adapter *adapter, u8 dest)
+{
+ u32 tmp;
+
+ udelay(1000);
+
+ tmp = (read_reg_dw(adapter, 0x714) & 0xfffffffc) | (dest & 3);
+
+ udelay(1000);
+
+ write_reg_dw(adapter, 0x714, tmp);
+ write_reg_dw(adapter, 0x714, tmp);
+
+ udelay(1000);
+
+ /* return value is never used? */
+/* return tmp; */
+}
+
+static void sram_set_cai_dest(struct adapter *adapter, u8 dest)
+{
+ u32 tmp;
+
+ udelay(1000);
+
+ tmp = (read_reg_dw(adapter, 0x714) & 0xfffffff3) | ((dest & 3) << 2);
+
+ udelay(1000);
+ udelay(1000);
+
+ write_reg_dw(adapter, 0x714, tmp);
+ write_reg_dw(adapter, 0x714, tmp);
+
+ udelay(1000);
+
+ /* return value is never used? */
+/* return tmp; */
+}
+
+static void sram_set_cao_dest(struct adapter *adapter, u8 dest)
+{
+ u32 tmp;
+
+ udelay(1000);
+
+ tmp = (read_reg_dw(adapter, 0x714) & 0xffffffcf) | ((dest & 3) << 4);
+
+ udelay(1000);
+ udelay(1000);
+
+ write_reg_dw(adapter, 0x714, tmp);
+ write_reg_dw(adapter, 0x714, tmp);
+
+ udelay(1000);
+
+ /* return value is never used? */
+/* return tmp; */
+}
+
+static void sram_set_media_dest(struct adapter *adapter, u8 dest)
+{
+ u32 tmp;
+
+ udelay(1000);
+
+ tmp = (read_reg_dw(adapter, 0x714) & 0xffffff3f) | ((dest & 3) << 6);
+
+ udelay(1000);
+ udelay(1000);
+
+ write_reg_dw(adapter, 0x714, tmp);
+ write_reg_dw(adapter, 0x714, tmp);
+
+ udelay(1000);
+
+ /* return value is never used? */
+/* return tmp; */
+}
+
+/* SRAM memory is accessed through a buffer register in the FlexCop
+ chip (0x700). This register has the following structure:
+ bits 0-14 : address
+ bit 15 : read/write flag
+ bits 16-23 : 8-bit word to write
+ bits 24-27 : = 4
+ bits 28-29 : memory bank selector
+ bit 31 : busy flag
+*/
+static void flex_sram_write(struct adapter *adapter, u32 bank, u32 addr, u8 *buf, u32 len)
+{
+ int i, retries;
+ u32 command;
+
+ for (i = 0; i < len; i++) {
+ command = bank | addr | 0x04000000 | (*buf << 0x10);
+
+ retries = 2;
+
+ while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) {
+ mdelay(1);
+ retries--;
+ };
+
+ if (retries == 0)
+ printk("%s: SRAM timeout\n", __FUNCTION__);
+
+ write_reg_dw(adapter, 0x700, command);
+
+ buf++;
+ addr++;
+ }
+}
+
+static void flex_sram_read(struct adapter *adapter, u32 bank, u32 addr, u8 *buf, u32 len)
+{
+ int i, retries;
+ u32 command, value;
+
+ for (i = 0; i < len; i++) {
+ command = bank | addr | 0x04008000;
+
+ retries = 10000;
+
+ while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) {
+ mdelay(1);
+ retries--;
+ };
+
+ if (retries == 0)
+ printk("%s: SRAM timeout\n", __FUNCTION__);
+
+ write_reg_dw(adapter, 0x700, command);
+
+ retries = 10000;
+
+ while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) {
+ mdelay(1);
+ retries--;
+ };
+
+ if (retries == 0)
+ printk("%s: SRAM timeout\n", __FUNCTION__);
+
+ value = read_reg_dw(adapter, 0x700) >> 0x10;
+
+ *buf = (value & 0xff);
+
+ addr++;
+ buf++;
+ }
+}
+
+static void sram_write_chunk(struct adapter *adapter, u32 addr, u8 *buf, u16 len)
+{
+ u32 bank;
+
+ bank = 0;
+
+ if (adapter->dw_sram_type == 0x20000) {
+ bank = (addr & 0x18000) << 0x0d;
+ }
+
+ if (adapter->dw_sram_type == 0x00000) {
+ if ((addr >> 0x0f) == 0)
+ bank = 0x20000000;
+ else
+ bank = 0x10000000;
+ }
+
+ flex_sram_write(adapter, bank, addr & 0x7fff, buf, len);
+}
+
+static void sram_read_chunk(struct adapter *adapter, u32 addr, u8 *buf, u16 len)
+{
+ u32 bank;
+
+ bank = 0;
+
+ if (adapter->dw_sram_type == 0x20000) {
+ bank = (addr & 0x18000) << 0x0d;
+ }
+
+ if (adapter->dw_sram_type == 0x00000) {
+ if ((addr >> 0x0f) == 0)
+ bank = 0x20000000;
+ else
+ bank = 0x10000000;
+ }
+
+ flex_sram_read(adapter, bank, addr & 0x7fff, buf, len);
+}
+
+static void sram_read(struct adapter *adapter, u32 addr, u8 *buf, u32 len)
+{
+ u32 length;
+
+ while (len != 0) {
+ length = len;
+
+ // check if the address range belongs to the same
+ // 32K memory chip. If not, the data is read from
+ // one chip at a time.
+ if ((addr >> 0x0f) != ((addr + len - 1) >> 0x0f)) {
+ length = (((addr >> 0x0f) + 1) << 0x0f) - addr;
+ }
+
+ sram_read_chunk(adapter, addr, buf, length);
+
+ addr = addr + length;
+ buf = buf + length;
+ len = len - length;
+ }
+}
+
+static void sram_write(struct adapter *adapter, u32 addr, u8 *buf, u32 len)
+{
+ u32 length;
+
+ while (len != 0) {
+ length = len;
+
+ // check if the address range belongs to the same
+ // 32K memory chip. If not, the data is written to
+ // one chip at a time.
+ if ((addr >> 0x0f) != ((addr + len - 1) >> 0x0f)) {
+ length = (((addr >> 0x0f) + 1) << 0x0f) - addr;
+ }
+
+ sram_write_chunk(adapter, addr, buf, length);
+
+ addr = addr + length;
+ buf = buf + length;
+ len = len - length;
+ }
+}
+
+static void sram_set_size(struct adapter *adapter, u32 mask)
+{
+ write_reg_dw(adapter, 0x71c, (mask | (~0x30000 & read_reg_dw(adapter, 0x71c))));
+}
+
+static void sram_init(struct adapter *adapter)
+{
+ u32 tmp;
+
+ tmp = read_reg_dw(adapter, 0x71c);
+
+ write_reg_dw(adapter, 0x71c, 1);
+
+ if (read_reg_dw(adapter, 0x71c) != 0) {
+ write_reg_dw(adapter, 0x71c, tmp);
+
+ adapter->dw_sram_type = tmp & 0x30000;
+
+ ddprintk("%s: dw_sram_type = %x\n", __FUNCTION__, adapter->dw_sram_type);
+
+ } else {
+
+ adapter->dw_sram_type = 0x10000;
+
+ ddprintk("%s: dw_sram_type = %x\n", __FUNCTION__, adapter->dw_sram_type);
+ }
+
+ /* return value is never used? */
+/* return adapter->dw_sram_type; */
+}
+
+static int sram_test_location(struct adapter *adapter, u32 mask, u32 addr)
+{
+ u8 tmp1, tmp2;
+
+ dprintk("%s: mask = %x, addr = %x\n", __FUNCTION__, mask, addr);
+
+ sram_set_size(adapter, mask);
+ sram_init(adapter);
+
+ tmp2 = 0xa5;
+ tmp1 = 0x4f;
+
+ sram_write(adapter, addr, &tmp2, 1);
+ sram_write(adapter, addr + 4, &tmp1, 1);
+
+ tmp2 = 0;
+
+ mdelay(20);
+
+ sram_read(adapter, addr, &tmp2, 1);
+ sram_read(adapter, addr, &tmp2, 1);
+
+ dprintk("%s: wrote 0xa5, read 0x%2x\n", __FUNCTION__, tmp2);
+
+ if (tmp2 != 0xa5)
+ return 0;
+
+ tmp2 = 0x5a;
+ tmp1 = 0xf4;
+
+ sram_write(adapter, addr, &tmp2, 1);
+ sram_write(adapter, addr + 4, &tmp1, 1);
+
+ tmp2 = 0;
+
+ mdelay(20);
+
+ sram_read(adapter, addr, &tmp2, 1);
+ sram_read(adapter, addr, &tmp2, 1);
+
+ dprintk("%s: wrote 0x5a, read 0x%2x\n", __FUNCTION__, tmp2);
+
+ if (tmp2 != 0x5a)
+ return 0;
+
+ return 1;
+}
+
+static u32 sram_length(struct adapter *adapter)
+{
+ if (adapter->dw_sram_type == 0x10000)
+ return 32768; // 32K
+ if (adapter->dw_sram_type == 0x00000)
+ return 65536; // 64K
+ if (adapter->dw_sram_type == 0x20000)
+ return 131072; // 128K
+
+ return 32768; // 32K
+}
+
+/* FlexcopII can work with 32K, 64K or 128K of external SRAM memory.
+ - for 128K there are 4x32K chips at bank 0,1,2,3.
+ - for 64K there are 2x32K chips at bank 1,2.
+ - for 32K there is one 32K chip at bank 0.
+
+ FlexCop works only with one bank at a time. The bank is selected
+ by bits 28-29 of the 0x700 register.
+
+ bank 0 covers addresses 0x00000-0x07fff
+ bank 1 covers addresses 0x08000-0x0ffff
+ bank 2 covers addresses 0x10000-0x17fff
+ bank 3 covers addresses 0x18000-0x1ffff
+*/
+static int sram_detect_for_flex2(struct adapter *adapter)
+{
+ u32 tmp, tmp2, tmp3;
+
+ dprintk("%s:\n", __FUNCTION__);
+
+ tmp = read_reg_dw(adapter, 0x208);
+ write_reg_dw(adapter, 0x208, 0);
+
+ tmp2 = read_reg_dw(adapter, 0x71c);
+
+ dprintk("%s: tmp2 = %x\n", __FUNCTION__, tmp2);
+
+ write_reg_dw(adapter, 0x71c, 1);
+
+ tmp3 = read_reg_dw(adapter, 0x71c);
+
+ dprintk("%s: tmp3 = %x\n", __FUNCTION__, tmp3);
+
+ write_reg_dw(adapter, 0x71c, tmp2);
+
+ // check for internal SRAM ???
+ tmp3--;
+ if (tmp3 != 0) {
+ sram_set_size(adapter, 0x10000);
+ sram_init(adapter);
+ write_reg_dw(adapter, 0x208, tmp);
+
+ dprintk("%s: sram size = 32K\n", __FUNCTION__);
+
+ return 32;
+ }
+
+ if (sram_test_location(adapter, 0x20000, 0x18000) != 0) {
+ sram_set_size(adapter, 0x20000);
+ sram_init(adapter);
+ write_reg_dw(adapter, 0x208, tmp);
+
+ dprintk("%s: sram size = 128K\n", __FUNCTION__);
+
+ return 128;
+ }
+
+ if (sram_test_location(adapter, 0x00000, 0x10000) != 0) {
+ sram_set_size(adapter, 0x00000);
+ sram_init(adapter);
+ write_reg_dw(adapter, 0x208, tmp);
+
+ dprintk("%s: sram size = 64K\n", __FUNCTION__);
+
+ return 64;
+ }
+
+ if (sram_test_location(adapter, 0x10000, 0x00000) != 0) {
+ sram_set_size(adapter, 0x10000);
+ sram_init(adapter);
+ write_reg_dw(adapter, 0x208, tmp);
+
+ dprintk("%s: sram size = 32K\n", __FUNCTION__);
+
+ return 32;
+ }
+
+ sram_set_size(adapter, 0x10000);
+ sram_init(adapter);
+ write_reg_dw(adapter, 0x208, tmp);
+
+ dprintk("%s: SRAM detection failed. Set to 32K \n", __FUNCTION__);
+
+ return 0;
+}
+
+static void sll_detect_sram_size(struct adapter *adapter)
+{
+ sram_detect_for_flex2(adapter);
+}
+
+/* EEPROM (Skystar2 has one "24LC08B" chip on board) */
+/*
+static int eeprom_write(struct adapter *adapter, u16 addr, u8 *buf, u16 len)
+{
+ return flex_i2c_write(adapter, 0x20000000, 0x50, addr, buf, len);
+}
+*/
+
+static int eeprom_read(struct adapter *adapter, u16 addr, u8 *buf, u16 len)
+{
+ return flex_i2c_read(adapter, 0x20000000, 0x50, addr, buf, len);
+}
+
+static u8 calc_lrc(u8 *buf, int len)
+{
+ int i;
+ u8 sum;
+
+ sum = 0;
+
+ for (i = 0; i < len; i++)
+ sum = sum ^ buf[i];
+
+ return sum;
+}
+
+static int eeprom_lrc_read(struct adapter *adapter, u32 addr, u32 len, u8 *buf, int retries)
+{
+ int i;
+
+ for (i = 0; i < retries; i++) {
+ if (eeprom_read(adapter, addr, buf, len) == len) {
+ if (calc_lrc(buf, len - 1) == buf[len - 1])
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+/*
+static int eeprom_lrc_write(struct adapter *adapter, u32 addr, u32 len, u8 *wbuf, u8 *rbuf, int retries)
+{
+ int i;
+
+ for (i = 0; i < retries; i++) {
+ if (eeprom_write(adapter, addr, wbuf, len) == len) {
+ if (eeprom_lrc_read(adapter, addr, len, rbuf, retries) == 1)
+ return 1;
+ }
+ }
+
+ return 0;
+}
+*/
+
+
+/* These functions could be used to unlock SkyStar2 cards. */
+
+/*
+static int eeprom_writeKey(struct adapter *adapter, u8 *key, u32 len)
+{
+ u8 rbuf[20];
+ u8 wbuf[20];
+
+ if (len != 16)
+ return 0;
+
+ memcpy(wbuf, key, len);
+
+ wbuf[16] = 0;
+ wbuf[17] = 0;
+ wbuf[18] = 0;
+ wbuf[19] = calc_lrc(wbuf, 19);
+
+ return eeprom_lrc_write(adapter, 0x3e4, 20, wbuf, rbuf, 4);
+}
+
+static int eeprom_readKey(struct adapter *adapter, u8 *key, u32 len)
+{
+ u8 buf[20];
+
+ if (len != 16)
+ return 0;
+
+ if (eeprom_lrc_read(adapter, 0x3e4, 20, buf, 4) == 0)
+ return 0;
+
+ memcpy(key, buf, len);
+
+ return 1;
+}
+*/
+
+static int eeprom_get_mac_addr(struct adapter *adapter, char type, u8 *mac)
+{
+ u8 tmp[8];
+
+ if (eeprom_lrc_read(adapter, 0x3f8, 8, tmp, 4) != 0) {
+ if (type != 0) {
+ mac[0] = tmp[0];
+ mac[1] = tmp[1];
+ mac[2] = tmp[2];
+ mac[3] = 0xfe;
+ mac[4] = 0xff;
+ mac[5] = tmp[3];
+ mac[6] = tmp[4];
+ mac[7] = tmp[5];
+
+ } else {
+
+ mac[0] = tmp[0];
+ mac[1] = tmp[1];
+ mac[2] = tmp[2];
+ mac[3] = tmp[3];
+ mac[4] = tmp[4];
+ mac[5] = tmp[5];
+ }
+
+ return 1;
+
+ } else {
+
+ if (type == 0) {
+ memset(mac, 0, 6);
+
+ } else {
+
+ memset(mac, 0, 8);
+ }
+
+ return 0;
+ }
+}
+
+/*
+static char eeprom_set_mac_addr(struct adapter *adapter, char type, u8 *mac)
+{
+ u8 tmp[8];
+
+ if (type != 0) {
+ tmp[0] = mac[0];
+ tmp[1] = mac[1];
+ tmp[2] = mac[2];
+ tmp[3] = mac[5];
+ tmp[4] = mac[6];
+ tmp[5] = mac[7];
+
+ } else {
+
+ tmp[0] = mac[0];
+ tmp[1] = mac[1];
+ tmp[2] = mac[2];
+ tmp[3] = mac[3];
+ tmp[4] = mac[4];
+ tmp[5] = mac[5];
+ }
+
+ tmp[6] = 0;
+ tmp[7] = calc_lrc(tmp, 7);
+
+ if (eeprom_write(adapter, 0x3f8, tmp, 8) == 8)
+ return 1;
+
+ return 0;
+}
+*/
+
+/* PID filter */
+
+/* every flexcop has 6 "lower" hw PID filters */
+/* these are enabled by setting bits 0-5 of 0x208 */
+/* for the 32 additional filters we have to select one */
+/* of them through 0x310 and modify through 0x314 */
+/* op: 0=disable, 1=enable */
+static void filter_enable_hw_filter(struct adapter *adapter, int id, u8 op)
+{
+ dprintk("%s: id=%d op=%d\n", __FUNCTION__, id, op);
+ if (id <= 5) {
+ u32 mask = (0x00000001 << id);
+ write_reg_bitfield(adapter, 0x208, mask, op ? mask : 0);
+ } else {
+ /* select */
+ write_reg_bitfield(adapter, 0x310, 0x1f, (id - 6) & 0x1f);
+ /* modify */
+ write_reg_bitfield(adapter, 0x314, 0x00006000, op ? 0x00004000 : 0);
+ }
+}
+
+/* this sets the PID that should pass the specified filter */
+static void pid_set_hw_pid(struct adapter *adapter, int id, u16 pid)
+{
+ dprintk("%s: id=%d pid=%d\n", __FUNCTION__, id, pid);
+ if (id <= 5) {
+ u32 adr = 0x300 + ((id & 6) << 1);
+ int shift = (id & 1) ? 16 : 0;
+ dprintk("%s: id=%d addr=%x %c pid=%d\n", __FUNCTION__, id, adr, (id & 1) ? 'h' : 'l', pid);
+ write_reg_bitfield(adapter, adr, (0x7fff) << shift, (pid & 0x1fff) << shift);
+ } else {
+ /* select */
+ write_reg_bitfield(adapter, 0x310, 0x1f, (id - 6) & 0x1f);
+ /* modify */
+ write_reg_bitfield(adapter, 0x314, 0x1fff, pid & 0x1fff);
+ }
+}
+
+
+/*
+static void filter_enable_null_filter(struct adapter *adapter, u32 op)
+{
+ dprintk("%s: op=%x\n", __FUNCTION__, op);
+
+ write_reg_bitfield(adapter, 0x208, 0x00000040, op?0x00000040:0);
+}
+*/
+
+static void filter_enable_mask_filter(struct adapter *adapter, u32 op)
+{
+ dprintk("%s: op=%x\n", __FUNCTION__, op);
+
+ write_reg_bitfield(adapter, 0x208, 0x00000080, op ? 0x00000080 : 0);
+}
+
+
+static void ctrl_enable_mac(struct adapter *adapter, u32 op)
+{
+ write_reg_bitfield(adapter, 0x208, 0x00004000, op ? 0x00004000 : 0);
+}
+
+static int ca_set_mac_dst_addr_filter(struct adapter *adapter, u8 *mac)
+{
+ u32 tmp1, tmp2;
+
+ tmp1 = (mac[3] << 0x18) | (mac[2] << 0x10) | (mac[1] << 0x08) | mac[0];
+ tmp2 = (mac[5] << 0x08) | mac[4];
+
+ write_reg_dw(adapter, 0x418, tmp1);
+ write_reg_dw(adapter, 0x41c, tmp2);
+
+ return 0;
+}
+
+/*
+static void set_ignore_mac_filter(struct adapter *adapter, u8 op)
+{
+ if (op != 0) {
+ write_reg_bitfield(adapter, 0x208, 0x00004000, 0);
+ adapter->mac_filter = 1;
+ } else {
+ if (adapter->mac_filter != 0) {
+ adapter->mac_filter = 0;
+ write_reg_bitfield(adapter, 0x208, 0x00004000, 0x00004000);
+ }
+ }
+}
+*/
+
+/*
+static void check_null_filter_enable(struct adapter *adapter)
+{
+ filter_enable_null_filter(adapter, 1);
+ filter_enable_mask_filter(adapter, 1);
+}
+*/
+
+static void pid_set_group_pid(struct adapter *adapter, u16 pid)
+{
+ u32 value;
+
+ dprintk("%s: pid=%x\n", __FUNCTION__, pid);
+ value = (pid & 0x3fff) | (read_reg_dw(adapter, 0x30c) & 0xffff0000);
+ write_reg_dw(adapter, 0x30c, value);
+}
+
+static void pid_set_group_mask(struct adapter *adapter, u16 pid)
+{
+ u32 value;
+
+ dprintk("%s: pid=%x\n", __FUNCTION__, pid);
+ value = ((pid & 0x3fff) << 0x10) | (read_reg_dw(adapter, 0x30c) & 0xffff);
+ write_reg_dw(adapter, 0x30c, value);
+}
+
+/*
+static int pid_get_group_pid(struct adapter *adapter)
+{
+ return read_reg_dw(adapter, 0x30c) & 0x00001fff;
+}
+
+static int pid_get_group_mask(struct adapter *adapter)
+{
+ return (read_reg_dw(adapter, 0x30c) >> 0x10)& 0x00001fff;
+}
+*/
+
+/*
+static void reset_hardware_pid_filter(struct adapter *adapter)
+{
+ pid_set_stream1_pid(adapter, 0x1fff);
+
+ pid_set_stream2_pid(adapter, 0x1fff);
+ filter_enable_stream2_filter(adapter, 0);
+
+ pid_set_pcr_pid(adapter, 0x1fff);
+ filter_enable_pcr_filter(adapter, 0);
+
+ pid_set_pmt_pid(adapter, 0x1fff);
+ filter_enable_pmt_filter(adapter, 0);
+
+ pid_set_ecm_pid(adapter, 0x1fff);
+ filter_enable_ecm_filter(adapter, 0);
+
+ pid_set_emm_pid(adapter, 0x1fff);
+ filter_enable_emm_filter(adapter, 0);
+}
+*/
+
+static void init_pids(struct adapter *adapter)
+{
+ int i;
+
+ adapter->pid_count = 0;
+ adapter->whole_bandwidth_count = 0;
+ for (i = 0; i < adapter->useable_hw_filters; i++) {
+ dprintk("%s: setting filter %d to 0x1fff\n", __FUNCTION__, i);
+ adapter->hw_pids[i] = 0x1fff;
+ pid_set_hw_pid(adapter, i, 0x1fff);
+}
+
+ pid_set_group_pid(adapter, 0);
+ pid_set_group_mask(adapter, 0x1fe0);
+}
+
+static void open_whole_bandwidth(struct adapter *adapter)
+{
+ dprintk("%s:\n", __FUNCTION__);
+ pid_set_group_pid(adapter, 0);
+ pid_set_group_mask(adapter, 0);
+/*
+ filter_enable_mask_filter(adapter, 1);
+*/
+}
+
+static void close_whole_bandwidth(struct adapter *adapter)
+{
+ dprintk("%s:\n", __FUNCTION__);
+ pid_set_group_pid(adapter, 0);
+ pid_set_group_mask(adapter, 0x1fe0);
+/*
+ filter_enable_mask_filter(adapter, 1);
+*/
+}
+
+static void whole_bandwidth_inc(struct adapter *adapter)
+{
+ if (adapter->whole_bandwidth_count++ == 0)
+ open_whole_bandwidth(adapter);
+}
+
+static void whole_bandwidth_dec(struct adapter *adapter)
+{
+ if (--adapter->whole_bandwidth_count <= 0)
+ close_whole_bandwidth(adapter);
+}
+
+/* The specified PID has to be let through the
+ hw filters.
+ We try to allocate an hardware filter and open whole
+ bandwidth when allocation is impossible.
+ All pids<=0x1f pass through the group filter.
+ Returns 1 on success, -1 on error */
+static int add_hw_pid(struct adapter *adapter, u16 pid)
+{
+ int i;
+
+ dprintk("%s: pid=%d\n", __FUNCTION__, pid);
+
+ if (pid <= 0x1f)
+ return 1;
+
+ /* we can't use a filter for 0x2000, so no search */
+ if (pid != 0x2000) {
+ /* find an unused hardware filter */
+ for (i = 0; i < adapter->useable_hw_filters; i++) {
+ dprintk("%s: pid=%d searching slot=%d\n", __FUNCTION__, pid, i);
+ if (adapter->hw_pids[i] == 0x1fff) {
+ dprintk("%s: pid=%d slot=%d\n", __FUNCTION__, pid, i);
+ adapter->hw_pids[i] = pid;
+ pid_set_hw_pid(adapter, i, pid);
+ filter_enable_hw_filter(adapter, i, 1);
+ return 1;
+ }
+ }
+ }
+ /* if we have not used a filter, this pid depends on whole bandwidth */
+ dprintk("%s: pid=%d whole_bandwidth\n", __FUNCTION__, pid);
+ whole_bandwidth_inc(adapter);
+ return 1;
+ }
+
+/* returns -1 if the pid was not present in the filters */
+static int remove_hw_pid(struct adapter *adapter, u16 pid)
+{
+ int i;
+
+ dprintk("%s: pid=%d\n", __FUNCTION__, pid);
+
+ if (pid <= 0x1f)
+ return 1;
+
+ /* we can't use a filter for 0x2000, so no search */
+ if (pid != 0x2000) {
+ for (i = 0; i < adapter->useable_hw_filters; i++) {
+ dprintk("%s: pid=%d searching slot=%d\n", __FUNCTION__, pid, i);
+ if (adapter->hw_pids[i] == pid) { // find the pid slot
+ dprintk("%s: pid=%d slot=%d\n", __FUNCTION__, pid, i);
+ adapter->hw_pids[i] = 0x1fff;
+ pid_set_hw_pid(adapter, i, 0x1fff);
+ filter_enable_hw_filter(adapter, i, 0);
+ return 1;
+ }
+ }
+ }
+ /* if we have not used a filter, this pid depended on whole bandwith */
+ dprintk("%s: pid=%d whole_bandwidth\n", __FUNCTION__, pid);
+ whole_bandwidth_dec(adapter);
+ return 1;
+ }
+
+/* Adds a PID to the filters.
+ Adding a pid more than once is possible, we keep reference counts.
+ Whole stream available through pid==0x2000.
+ Returns 1 on success, -1 on error */
+static int add_pid(struct adapter *adapter, u16 pid)
+{
+ int i;
+
+ dprintk("%s: pid=%d\n", __FUNCTION__, pid);
+
+ if (pid > 0x1ffe && pid != 0x2000)
+ return -1;
+
+ // check if the pid is already present
+ for (i = 0; i < adapter->pid_count; i++)
+ if (adapter->pid_list[i] == pid) {
+ adapter->pid_rc[i]++; // increment ref counter
+ return 1;
+ }
+
+ if (adapter->pid_count == N_PID_SLOTS)
+ return -1; // no more pids can be added
+ adapter->pid_list[adapter->pid_count] = pid; // register pid
+ adapter->pid_rc[adapter->pid_count] = 1;
+ adapter->pid_count++;
+ // hardware setting
+ add_hw_pid(adapter, pid);
+
+ return 1;
+ }
+
+/* Removes a PID from the filters. */
+static int remove_pid(struct adapter *adapter, u16 pid)
+{
+ int i;
+
+ dprintk("%s: pid=%d\n", __FUNCTION__, pid);
+
+ if (pid > 0x1ffe && pid != 0x2000)
+ return -1;
+
+ // check if the pid is present (it must be!)
+ for (i = 0; i < adapter->pid_count; i++) {
+ if (adapter->pid_list[i] == pid) {
+ adapter->pid_rc[i]--;
+ if (adapter->pid_rc[i] <= 0) {
+ // remove from the list
+ adapter->pid_count--;
+ adapter->pid_list[i]=adapter->pid_list[adapter->pid_count];
+ adapter->pid_rc[i] = adapter->pid_rc[adapter->pid_count];
+ // hardware setting
+ remove_hw_pid(adapter, pid);
+ }
+ return 1;
+ }
+ }
+
+ return -1;
+}
+
+
+/* dma & irq */
+static void ctrl_enable_smc(struct adapter *adapter, u32 op)
+{
+ write_reg_bitfield(adapter, 0x208, 0x00000800, op ? 0x00000800 : 0);
+}
+
+static void dma_enable_disable_irq(struct adapter *adapter, u32 flag1, u32 flag2, u32 flag3)
+{
+ adapter->dma_ctrl = adapter->dma_ctrl & 0x000f0000;
+
+ if (flag1 == 0) {
+ if (flag2 == 0)
+ adapter->dma_ctrl = adapter->dma_ctrl & ~0x00010000;
+ else
+ adapter->dma_ctrl = adapter->dma_ctrl | 0x00010000;
+
+ if (flag3 == 0)
+ adapter->dma_ctrl = adapter->dma_ctrl & ~0x00020000;
+ else
+ adapter->dma_ctrl = adapter->dma_ctrl | 0x00020000;
+
+ } else {
+
+ if (flag2 == 0)
+ adapter->dma_ctrl = adapter->dma_ctrl & ~0x00040000;
+ else
+ adapter->dma_ctrl = adapter->dma_ctrl | 0x00040000;
+
+ if (flag3 == 0)
+ adapter->dma_ctrl = adapter->dma_ctrl & ~0x00080000;
+ else
+ adapter->dma_ctrl = adapter->dma_ctrl | 0x00080000;
+ }
+}
+
+static void irq_dma_enable_disable_irq(struct adapter *adapter, u32 op)
+{
+ u32 value;
+
+ value = read_reg_dw(adapter, 0x208) & 0xfff0ffff;
+
+ if (op != 0)
+ value = value | (adapter->dma_ctrl & 0x000f0000);
+
+ write_reg_dw(adapter, 0x208, value);
+}
+
+/* FlexCopII has 2 dma channels. DMA1 is used to transfer TS data to
+ system memory.
+
+ The DMA1 buffer is divided in 2 subbuffers of equal size.
+ FlexCopII will transfer TS data to one subbuffer, signal an interrupt
+ when the subbuffer is full and continue fillig the second subbuffer.
+
+ For DMA1:
+ subbuffer size in 32-bit words is stored in the first 24 bits of
+ register 0x004. The last 8 bits of register 0x004 contain the number
+ of subbuffers.
+
+ the first 30 bits of register 0x000 contain the address of the first
+ subbuffer. The last 2 bits contain 0, when dma1 is disabled and 1,
+ when dma1 is enabled.
+
+ the first 30 bits of register 0x00c contain the address of the second
+ subbuffer. the last 2 bits contain 1.
+
+ register 0x008 will contain the address of the subbuffer that was filled
+ with TS data, when FlexCopII will generate an interrupt.
+
+ For DMA2:
+ subbuffer size in 32-bit words is stored in the first 24 bits of
+ register 0x014. The last 8 bits of register 0x014 contain the number
+ of subbuffers.
+
+ the first 30 bits of register 0x010 contain the address of the first
+ subbuffer. The last 2 bits contain 0, when dma1 is disabled and 1,
+ when dma1 is enabled.
+
+ the first 30 bits of register 0x01c contain the address of the second
+ subbuffer. the last 2 bits contain 1.
+
+ register 0x018 contains the address of the subbuffer that was filled
+ with TS data, when FlexCopII generates an interrupt.
+*/
+static int dma_init_dma(struct adapter *adapter, u32 dma_channel)
+{
+ u32 subbuffers, subbufsize, subbuf0, subbuf1;
+
+ if (dma_channel == 0) {
+ dprintk("%s: Initializing DMA1 channel\n", __FUNCTION__);
+
+ subbuffers = 2;
+
+ subbufsize = (((adapter->dmaq1.buffer_size / 2) / 4) << 8) | subbuffers;
+
+ subbuf0 = adapter->dmaq1.bus_addr & 0xfffffffc;
+
+ subbuf1 = ((adapter->dmaq1.bus_addr + adapter->dmaq1.buffer_size / 2) & 0xfffffffc) | 1;
+
+ dprintk("%s: first subbuffer address = 0x%x\n", __FUNCTION__, subbuf0);
+ udelay(1000);
+ write_reg_dw(adapter, 0x000, subbuf0);
+
+ dprintk("%s: subbuffer size = 0x%x\n", __FUNCTION__, (subbufsize >> 8) * 4);
+ udelay(1000);
+ write_reg_dw(adapter, 0x004, subbufsize);
+
+ dprintk("%s: second subbuffer address = 0x%x\n", __FUNCTION__, subbuf1);
+ udelay(1000);
+ write_reg_dw(adapter, 0x00c, subbuf1);
+
+ dprintk("%s: counter = 0x%x\n", __FUNCTION__, adapter->dmaq1.bus_addr & 0xfffffffc);
+ write_reg_dw(adapter, 0x008, adapter->dmaq1.bus_addr & 0xfffffffc);
+ udelay(1000);
+
+ dma_enable_disable_irq(adapter, 0, 1, subbuffers ? 1 : 0);
+
+ irq_dma_enable_disable_irq(adapter, 1);
+
+ sram_set_media_dest(adapter, 1);
+ sram_set_net_dest(adapter, 1);
+ sram_set_cai_dest(adapter, 2);
+ sram_set_cao_dest(adapter, 2);
+ }
+
+ if (dma_channel == 1) {
+ dprintk("%s: Initializing DMA2 channel\n", __FUNCTION__);
+
+ subbuffers = 2;
+
+ subbufsize = (((adapter->dmaq2.buffer_size / 2) / 4) << 8) | subbuffers;
+
+ subbuf0 = adapter->dmaq2.bus_addr & 0xfffffffc;
+
+ subbuf1 = ((adapter->dmaq2.bus_addr + adapter->dmaq2.buffer_size / 2) & 0xfffffffc) | 1;
+
+ dprintk("%s: first subbuffer address = 0x%x\n", __FUNCTION__, subbuf0);
+ udelay(1000);
+ write_reg_dw(adapter, 0x010, subbuf0);
+
+ dprintk("%s: subbuffer size = 0x%x\n", __FUNCTION__, (subbufsize >> 8) * 4);
+ udelay(1000);
+ write_reg_dw(adapter, 0x014, subbufsize);
+
+ dprintk("%s: second buffer address = 0x%x\n", __FUNCTION__, subbuf1);
+ udelay(1000);
+ write_reg_dw(adapter, 0x01c, subbuf1);
+
+ sram_set_cai_dest(adapter, 2);
+ }
+
+ return 0;
+}
+
+static void ctrl_enable_receive_data(struct adapter *adapter, u32 op)
+{
+ if (op == 0) {
+ write_reg_bitfield(adapter, 0x208, 0x00008000, 0);
+ adapter->dma_status = adapter->dma_status & ~0x00000004;
+ } else {
+ write_reg_bitfield(adapter, 0x208, 0x00008000, 0x00008000);
+ adapter->dma_status = adapter->dma_status | 0x00000004;
+ }
+}
+
+/* bit 0 of dma_mask is set to 1 if dma1 channel has to be enabled/disabled
+ bit 1 of dma_mask is set to 1 if dma2 channel has to be enabled/disabled
+*/
+static void dma_start_stop(struct adapter *adapter, u32 dma_mask, int start_stop)
+{
+ u32 dma_enable, dma1_enable, dma2_enable;
+
+ dprintk("%s: dma_mask=%x\n", __FUNCTION__, dma_mask);
+
+ if (start_stop == 1) {
+ dprintk("%s: starting dma\n", __FUNCTION__);
+
+ dma1_enable = 0;
+ dma2_enable = 0;
+
+ if (((dma_mask & 1) != 0) && ((adapter->dma_status & 1) == 0) && (adapter->dmaq1.bus_addr != 0)) {
+ adapter->dma_status = adapter->dma_status | 1;
+ dma1_enable = 1;
+ }
+
+ if (((dma_mask & 2) != 0) && ((adapter->dma_status & 2) == 0) && (adapter->dmaq2.bus_addr != 0)) {
+ adapter->dma_status = adapter->dma_status | 2;
+ dma2_enable = 1;
+ }
+ // enable dma1 and dma2
+ if ((dma1_enable == 1) && (dma2_enable == 1)) {
+ write_reg_dw(adapter, 0x000, adapter->dmaq1.bus_addr | 1);
+ write_reg_dw(adapter, 0x00c, (adapter->dmaq1.bus_addr + adapter->dmaq1.buffer_size / 2) | 1);
+ write_reg_dw(adapter, 0x010, adapter->dmaq2.bus_addr | 1);
+
+ ctrl_enable_receive_data(adapter, 1);
+
+ return;
+ }
+ // enable dma1
+ if ((dma1_enable == 1) && (dma2_enable == 0)) {
+ write_reg_dw(adapter, 0x000, adapter->dmaq1.bus_addr | 1);
+ write_reg_dw(adapter, 0x00c, (adapter->dmaq1.bus_addr + adapter->dmaq1.buffer_size / 2) | 1);
+
+ ctrl_enable_receive_data(adapter, 1);
+
+ return;
+ }
+ // enable dma2
+ if ((dma1_enable == 0) && (dma2_enable == 1)) {
+ write_reg_dw(adapter, 0x010, adapter->dmaq2.bus_addr | 1);
+
+ ctrl_enable_receive_data(adapter, 1);
+
+ return;
+ }
+ // start dma
+ if ((dma1_enable == 0) && (dma2_enable == 0)) {
+ ctrl_enable_receive_data(adapter, 1);
+
+ return;
+ }
+
+ } else {
+
+ dprintk("%s: stopping dma\n", __FUNCTION__);
+
+ dma_enable = adapter->dma_status & 0x00000003;
+
+ if (((dma_mask & 1) != 0) && ((adapter->dma_status & 1) != 0)) {
+ dma_enable = dma_enable & 0xfffffffe;
+ }
+
+ if (((dma_mask & 2) != 0) && ((adapter->dma_status & 2) != 0)) {
+ dma_enable = dma_enable & 0xfffffffd;
+ }
+ //stop dma
+ if ((dma_enable == 0) && ((adapter->dma_status & 4) != 0)) {
+ ctrl_enable_receive_data(adapter, 0);
+
+ udelay(3000);
+ }
+ //disable dma1
+ if (((dma_mask & 1) != 0) && ((adapter->dma_status & 1) != 0) && (adapter->dmaq1.bus_addr != 0)) {
+ write_reg_dw(adapter, 0x000, adapter->dmaq1.bus_addr);
+ write_reg_dw(adapter, 0x00c, (adapter->dmaq1.bus_addr + adapter->dmaq1.buffer_size / 2) | 1);
+
+ adapter->dma_status = adapter->dma_status & ~0x00000001;
+ }
+ //disable dma2
+ if (((dma_mask & 2) != 0) && ((adapter->dma_status & 2) != 0) && (adapter->dmaq2.bus_addr != 0)) {
+ write_reg_dw(adapter, 0x010, adapter->dmaq2.bus_addr);
+
+ adapter->dma_status = adapter->dma_status & ~0x00000002;
+ }
+ }
+}
+
+static void open_stream(struct adapter *adapter, u16 pid)
+{
+ u32 dma_mask;
+
+ ++adapter->capturing;
+
+ filter_enable_mask_filter(adapter, 1);
+
+ add_pid(adapter, pid);
+
+ dprintk("%s: adapter->dma_status=%x\n", __FUNCTION__, adapter->dma_status);
+
+ if ((adapter->dma_status & 7) != 7) {
+ dma_mask = 0;
+
+ if (((adapter->dma_status & 0x10000000) != 0) && ((adapter->dma_status & 1) == 0)) {
+ dma_mask = dma_mask | 1;
+
+ adapter->dmaq1.head = 0;
+ adapter->dmaq1.tail = 0;
+
+ memset(adapter->dmaq1.buffer, 0, adapter->dmaq1.buffer_size);
+ }
+
+ if (((adapter->dma_status & 0x20000000) != 0) && ((adapter->dma_status & 2) == 0)) {
+ dma_mask = dma_mask | 2;
+
+ adapter->dmaq2.head = 0;
+ adapter->dmaq2.tail = 0;
+ }
+
+ if (dma_mask != 0) {
+ irq_dma_enable_disable_irq(adapter, 1);
+
+ dma_start_stop(adapter, dma_mask, 1);
+ }
+ }
+}
+
+static void close_stream(struct adapter *adapter, u16 pid)
+{
+ if (adapter->capturing > 0)
+ --adapter->capturing;
+
+ dprintk("%s: dma_status=%x\n", __FUNCTION__, adapter->dma_status);
+
+ if (adapter->capturing == 0) {
+ u32 dma_mask = 0;
+
+ if ((adapter->dma_status & 1) != 0)
+ dma_mask = dma_mask | 0x00000001;
+ if ((adapter->dma_status & 2) != 0)
+ dma_mask = dma_mask | 0x00000002;
+
+ if (dma_mask != 0) {
+ dma_start_stop(adapter, dma_mask, 0);
+ }
+ }
+ remove_pid(adapter, pid);
+}
+
+static void interrupt_service_dma1(struct adapter *adapter)
+{
+ struct dvb_demux *dvbdmx = &adapter->demux;
+
+ int n_cur_dma_counter;
+ u32 n_num_bytes_parsed;
+ u32 n_num_new_bytes_transferred;
+ u32 dw_default_packet_size = 188;
+ u8 gb_tmp_buffer[188];
+ u8 *pb_dma_buf_cur_pos;
+
+ n_cur_dma_counter = readl(adapter->io_mem + 0x008) - adapter->dmaq1.bus_addr;
+ n_cur_dma_counter = (n_cur_dma_counter / dw_default_packet_size) * dw_default_packet_size;
+
+ if ((n_cur_dma_counter < 0) || (n_cur_dma_counter > adapter->dmaq1.buffer_size)) {
+ dprintk("%s: dma counter outside dma buffer\n", __FUNCTION__);
+ return;
+ }
+
+ adapter->dmaq1.head = n_cur_dma_counter;
+
+ if (adapter->dmaq1.tail <= n_cur_dma_counter) {
+ n_num_new_bytes_transferred = n_cur_dma_counter - adapter->dmaq1.tail;
+
+ } else {
+
+ n_num_new_bytes_transferred = (adapter->dmaq1.buffer_size - adapter->dmaq1.tail) + n_cur_dma_counter;
+ }
+
+ ddprintk("%s: n_cur_dma_counter = %d\n", __FUNCTION__, n_cur_dma_counter);
+ ddprintk("%s: dmaq1.tail = %d\n", __FUNCTION__, adapter->dmaq1.tail);
+ ddprintk("%s: bytes_transferred = %d\n", __FUNCTION__, n_num_new_bytes_transferred);
+
+ if (n_num_new_bytes_transferred < dw_default_packet_size)
+ return;
+
+ n_num_bytes_parsed = 0;
+
+ while (n_num_bytes_parsed < n_num_new_bytes_transferred) {
+ pb_dma_buf_cur_pos = adapter->dmaq1.buffer + adapter->dmaq1.tail;
+
+ if (adapter->dmaq1.buffer + adapter->dmaq1.buffer_size < adapter->dmaq1.buffer + adapter->dmaq1.tail + 188) {
+ memcpy(gb_tmp_buffer, adapter->dmaq1.buffer + adapter->dmaq1.tail,
+ adapter->dmaq1.buffer_size - adapter->dmaq1.tail);
+ memcpy(gb_tmp_buffer + (adapter->dmaq1.buffer_size - adapter->dmaq1.tail), adapter->dmaq1.buffer,
+ (188 - (adapter->dmaq1.buffer_size - adapter->dmaq1.tail)));
+
+ pb_dma_buf_cur_pos = gb_tmp_buffer;
+ }
+
+ if (adapter->capturing != 0) {
+ dvb_dmx_swfilter_packets(dvbdmx, pb_dma_buf_cur_pos, dw_default_packet_size / 188);
+ }
+
+ n_num_bytes_parsed = n_num_bytes_parsed + dw_default_packet_size;
+
+ adapter->dmaq1.tail = adapter->dmaq1.tail + dw_default_packet_size;
+
+ if (adapter->dmaq1.tail >= adapter->dmaq1.buffer_size)
+ adapter->dmaq1.tail = adapter->dmaq1.tail - adapter->dmaq1.buffer_size;
+ };
+}
+
+static void interrupt_service_dma2(struct adapter *adapter)
+{
+ printk("%s:\n", __FUNCTION__);
+}
+
+static irqreturn_t isr(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct adapter *tmp = dev_id;
+
+ u32 value;
+
+ ddprintk("%s:\n", __FUNCTION__);
+
+ spin_lock_irq(&tmp->lock);
+
+ if (0 == ((value = read_reg_dw(tmp, 0x20c)) & 0x0f)) {
+ spin_unlock_irq(&tmp->lock);
+ return IRQ_NONE;
+ }
+
+ while (value != 0) {
+ if ((value & 0x03) != 0)
+ interrupt_service_dma1(tmp);
+ if ((value & 0x0c) != 0)
+ interrupt_service_dma2(tmp);
+ value = read_reg_dw(tmp, 0x20c) & 0x0f;
+ }
+
+ spin_unlock_irq(&tmp->lock);
+ return IRQ_HANDLED;
+}
+
+static int init_dma_queue_one(struct adapter *adapter, struct dmaq *dmaq,
+ int size, int dmaq_offset)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ dma_addr_t dma_addr;
+
+ dmaq->head = 0;
+ dmaq->tail = 0;
+
+ dmaq->buffer = pci_alloc_consistent(pdev, size + 0x80, &dma_addr);
+ if (!dmaq->buffer)
+ return -ENOMEM;
+
+ dmaq->bus_addr = dma_addr;
+ dmaq->buffer_size = size;
+
+ dma_init_dma(adapter, dmaq_offset);
+
+ ddprintk("%s: allocated dma buffer at 0x%p, length=%d\n",
+ __FUNCTION__, dmaq->buffer, size);
+
+ return 0;
+ }
+
+static int init_dma_queue(struct adapter *adapter)
+{
+ struct {
+ struct dmaq *dmaq;
+ u32 dma_status;
+ int size;
+ } dmaq_desc[] = {
+ { &adapter->dmaq1, 0x10000000, SIZE_OF_BUF_DMA1 },
+ { &adapter->dmaq2, 0x20000000, SIZE_OF_BUF_DMA2 }
+ }, *p = dmaq_desc;
+ int i;
+
+ for (i = 0; i < 2; i++, p++) {
+ if (init_dma_queue_one(adapter, p->dmaq, p->size, i) < 0)
+ adapter->dma_status &= ~p->dma_status;
+ else
+ adapter->dma_status |= p->dma_status;
+ }
+ return (adapter->dma_status & 0x30000000) ? 0 : -ENOMEM;
+}
+
+static void free_dma_queue_one(struct adapter *adapter, struct dmaq *dmaq)
+{
+ if (dmaq->buffer) {
+ pci_free_consistent(adapter->pdev, dmaq->buffer_size + 0x80,
+ dmaq->buffer, dmaq->bus_addr);
+ memset(dmaq, 0, sizeof(*dmaq));
+ }
+}
+
+static void free_dma_queue(struct adapter *adapter)
+{
+ struct dmaq *dmaq[] = {
+ &adapter->dmaq1,
+ &adapter->dmaq2,
+ NULL
+ }, **p;
+
+ for (p = dmaq; *p; p++)
+ free_dma_queue_one(adapter, *p);
+ }
+
+static void release_adapter(struct adapter *adapter)
+{
+ struct pci_dev *pdev = adapter->pdev;
+
+ iounmap(adapter->io_mem);
+ pci_disable_device(pdev);
+ pci_release_region(pdev, 0);
+ pci_release_region(pdev, 1);
+}
+
+static void free_adapter_object(struct adapter *adapter)
+{
+ dprintk("%s:\n", __FUNCTION__);
+
+ close_stream(adapter, 0);
+ free_irq(adapter->irq, adapter);
+ free_dma_queue(adapter);
+ release_adapter(adapter);
+ kfree(adapter);
+}
+
+static struct pci_driver skystar2_pci_driver;
+
+static int claim_adapter(struct adapter *adapter)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ u16 var;
+ int ret;
+
+ ret = pci_request_region(pdev, 1, skystar2_pci_driver.name);
+ if (ret < 0)
+ goto out;
+
+ ret = pci_request_region(pdev, 0, skystar2_pci_driver.name);
+ if (ret < 0)
+ goto err_pci_release_1;
+
+ pci_read_config_byte(pdev, PCI_CLASS_REVISION, &adapter->card_revision);
+
+ dprintk("%s: card revision %x \n", __FUNCTION__, adapter->card_revision);
+
+ ret = pci_enable_device(pdev);
+ if (ret < 0)
+ goto err_pci_release_0;
+
+ pci_read_config_word(pdev, 4, &var);
+
+ if ((var & 4) == 0)
+ pci_set_master(pdev);
+
+ adapter->io_port = pdev->resource[1].start;
+
+ adapter->io_mem = ioremap(pdev->resource[0].start, 0x800);
+
+ if (!adapter->io_mem) {
+ dprintk("%s: can not map io memory\n", __FUNCTION__);
+ ret = -EIO;
+ goto err_pci_disable;
+ }
+
+ dprintk("%s: io memory maped at %p\n", __FUNCTION__, adapter->io_mem);
+
+ ret = 1;
+out:
+ return ret;
+
+err_pci_disable:
+ pci_disable_device(pdev);
+err_pci_release_0:
+ pci_release_region(pdev, 0);
+err_pci_release_1:
+ pci_release_region(pdev, 1);
+ goto out;
+}
+
+/*
+static int sll_reset_flexcop(struct adapter *adapter)
+{
+ write_reg_dw(adapter, 0x208, 0);
+ write_reg_dw(adapter, 0x210, 0xb2ff);
+
+ return 0;
+}
+*/
+
+static void decide_how_many_hw_filters(struct adapter *adapter)
+{
+ int hw_filters;
+ int mod_option_hw_filters;
+
+ // FlexCop IIb & III have 6+32 hw filters
+ // FlexCop II has 6 hw filters, every other should have at least 6
+ switch (adapter->b2c2_revision) {
+ case 0x82: /* II */
+ hw_filters = 6;
+ break;
+ case 0xc3: /* IIB */
+ hw_filters = 6 + 32;
+ break;
+ case 0xc0: /* III */
+ hw_filters = 6 + 32;
+ break;
+ default:
+ hw_filters = 6;
+ break;
+ }
+ printk("%s: the chip has %i hardware filters", __FILE__, hw_filters);
+
+ mod_option_hw_filters = 0;
+ if (enable_hw_filters >= 1)
+ mod_option_hw_filters += 6;
+ if (enable_hw_filters >= 2)
+ mod_option_hw_filters += 32;
+
+ if (mod_option_hw_filters >= hw_filters) {
+ adapter->useable_hw_filters = hw_filters;
+ } else {
+ adapter->useable_hw_filters = mod_option_hw_filters;
+ printk(", but only %d will be used because of module option", mod_option_hw_filters);
+ }
+ printk("\n");
+ dprintk("%s: useable_hardware_filters set to %i\n", __FILE__, adapter->useable_hw_filters);
+}
+
+static int driver_initialize(struct pci_dev *pdev)
+{
+ struct adapter *adapter;
+ u32 tmp;
+ int ret = -ENOMEM;
+
+ adapter = kmalloc(sizeof(struct adapter), GFP_KERNEL);
+ if (!adapter) {
+ dprintk("%s: out of memory!\n", __FUNCTION__);
+ goto out;
+ }
+
+ memset(adapter, 0, sizeof(struct adapter));
+
+ pci_set_drvdata(pdev,adapter);
+
+ adapter->pdev = pdev;
+ adapter->irq = pdev->irq;
+
+ ret = claim_adapter(adapter);
+ if (ret < 0)
+ goto err_kfree;
+
+ irq_dma_enable_disable_irq(adapter, 0);
+
+ ret = request_irq(pdev->irq, isr, 0x4000000, "Skystar2", adapter);
+ if (ret < 0) {
+ dprintk("%s: unable to allocate irq=%d !\n", __FUNCTION__, pdev->irq);
+ goto err_release_adapter;
+ }
+
+ read_reg_dw(adapter, 0x208);
+ write_reg_dw(adapter, 0x208, 0);
+ write_reg_dw(adapter, 0x210, 0xb2ff);
+ write_reg_dw(adapter, 0x208, 0x40);
+
+ ret = init_dma_queue(adapter);
+ if (ret < 0)
+ goto err_free_irq;
+
+ adapter->b2c2_revision = (read_reg_dw(adapter, 0x204) >> 0x18);
+
+ switch (adapter->b2c2_revision) {
+ case 0x82:
+ printk("%s: FlexCopII(rev.130) chip found\n", __FILE__);
+ break;
+ case 0xc3:
+ printk("%s: FlexCopIIB(rev.195) chip found\n", __FILE__);
+ break;
+ case 0xc0:
+ printk("%s: FlexCopIII(rev.192) chip found\n", __FILE__);
+ break;
+ default:
+ printk("%s: The revision of the FlexCop chip on your card is %d\n", __FILE__, adapter->b2c2_revision);
+ printk("%s: This driver works only with FlexCopII(rev.130), FlexCopIIB(rev.195) and FlexCopIII(rev.192).\n", __FILE__);
+ ret = -ENODEV;
+ goto err_free_dma_queue;
+ }
+
+ decide_how_many_hw_filters(adapter);
+
+ init_pids(adapter);
+
+ tmp = read_reg_dw(adapter, 0x204);
+
+ write_reg_dw(adapter, 0x204, 0);
+ mdelay(20);
+
+ write_reg_dw(adapter, 0x204, tmp);
+ mdelay(10);
+
+ tmp = read_reg_dw(adapter, 0x308);
+ write_reg_dw(adapter, 0x308, 0x4000 | tmp);
+
+ adapter->dw_sram_type = 0x10000;
+
+ sll_detect_sram_size(adapter);
+
+ dprintk("%s sram length = %d, sram type= %x\n", __FUNCTION__, sram_length(adapter), adapter->dw_sram_type);
+
+ sram_set_media_dest(adapter, 1);
+ sram_set_net_dest(adapter, 1);
+
+ ctrl_enable_smc(adapter, 0);
+
+ sram_set_cai_dest(adapter, 2);
+ sram_set_cao_dest(adapter, 2);
+
+ dma_enable_disable_irq(adapter, 1, 0, 0);
+
+ if (eeprom_get_mac_addr(adapter, 0, adapter->mac_addr) != 0) {
+ printk("%s MAC address = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x \n", __FUNCTION__, adapter->mac_addr[0],
+ adapter->mac_addr[1], adapter->mac_addr[2], adapter->mac_addr[3], adapter->mac_addr[4], adapter->mac_addr[5],
+ adapter->mac_addr[6], adapter->mac_addr[7]
+ );
+
+ ca_set_mac_dst_addr_filter(adapter, adapter->mac_addr);
+ ctrl_enable_mac(adapter, 1);
+ }
+
+ spin_lock_init(&adapter->lock);
+
+out:
+ return ret;
+
+err_free_dma_queue:
+ free_dma_queue(adapter);
+err_free_irq:
+ free_irq(pdev->irq, adapter);
+err_release_adapter:
+ release_adapter(adapter);
+err_kfree:
+ pci_set_drvdata(pdev, NULL);
+ kfree(adapter);
+ goto out;
+}
+
+static void driver_halt(struct pci_dev *pdev)
+{
+ struct adapter *adapter = pci_get_drvdata(pdev);
+
+ irq_dma_enable_disable_irq(adapter, 0);
+
+ ctrl_enable_receive_data(adapter, 0);
+
+ free_adapter_object(adapter);
+
+ pci_set_drvdata(pdev, NULL);
+}
+
+static int dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
+ struct adapter *adapter = (struct adapter *) dvbdmx->priv;
+
+ dprintk("%s: PID=%d, type=%d\n", __FUNCTION__, dvbdmxfeed->pid, dvbdmxfeed->type);
+
+ open_stream(adapter, dvbdmxfeed->pid);
+
+ return 0;
+}
+
+static int dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
+ struct adapter *adapter = (struct adapter *) dvbdmx->priv;
+
+ dprintk("%s: PID=%d, type=%d\n", __FUNCTION__, dvbdmxfeed->pid, dvbdmxfeed->type);
+
+ close_stream(adapter, dvbdmxfeed->pid);
+
+ return 0;
+}
+
+/* lnb control */
+static void set_tuner_tone(struct adapter *adapter, u8 tone)
+{
+ u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc };
+ u16 ax;
+
+ dprintk("%s: %u\n", __FUNCTION__, tone);
+
+ switch (tone) {
+ case 1:
+ ax = wz_half_period_for_45_mhz[0];
+ break;
+ case 2:
+ ax = wz_half_period_for_45_mhz[1];
+ break;
+ case 3:
+ ax = wz_half_period_for_45_mhz[2];
+ break;
+ case 4:
+ ax = wz_half_period_for_45_mhz[3];
+ break;
+
+ default:
+ ax = 0;
+ }
+
+ if (ax != 0) {
+ write_reg_dw(adapter, 0x200, ((ax << 0x0f) + (ax & 0x7fff)) | 0x40000000);
+
+ } else {
+
+ write_reg_dw(adapter, 0x200, 0x40ff8000);
+ }
+}
+
+static void set_tuner_polarity(struct adapter *adapter, u8 polarity)
+{
+ u32 var;
+
+ dprintk("%s : polarity = %u \n", __FUNCTION__, polarity);
+
+ var = read_reg_dw(adapter, 0x204);
+
+ if (polarity == 0) {
+ dprintk("%s: LNB power off\n", __FUNCTION__);
+ var = var | 1;
+ };
+
+ if (polarity == 1) {
+ var = var & ~1;
+ var = var & ~4;
+ };
+
+ if (polarity == 2) {
+ var = var & ~1;
+ var = var | 4;
+ }
+
+ write_reg_dw(adapter, 0x204, var);
+}
+
+static void diseqc_send_bit(struct adapter *adapter, int data)
+{
+ set_tuner_tone(adapter, 1);
+ udelay(data ? 500 : 1000);
+ set_tuner_tone(adapter, 0);
+ udelay(data ? 1000 : 500);
+}
+
+
+static void diseqc_send_byte(struct adapter *adapter, int data)
+ {
+ int i, par = 1, d;
+
+ for (i = 7; i >= 0; i--) {
+ d = (data >> i) & 1;
+ par ^= d;
+ diseqc_send_bit(adapter, d);
+ }
+
+ diseqc_send_bit(adapter, par);
+ }
+
+
+static int send_diseqc_msg(struct adapter *adapter, int len, u8 *msg, unsigned long burst)
+{
+ int i;
+
+ set_tuner_tone(adapter, 0);
+ mdelay(16);
+
+ for (i = 0; i < len; i++)
+ diseqc_send_byte(adapter, msg[i]);
+
+ mdelay(16);
+
+ if (burst != -1) {
+ if (burst)
+ diseqc_send_byte(adapter, 0xff);
+ else {
+ set_tuner_tone(adapter, 1);
+ udelay(12500);
+ set_tuner_tone(adapter, 0);
+ }
+ msleep(20);
+ }
+
+ return 0;
+}
+
+static int flexcop_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
+{
+ struct adapter* adapter = (struct adapter*) fe->dvb->priv;
+
+ switch(tone) {
+ case SEC_TONE_ON:
+ set_tuner_tone(adapter, 1);
+ break;
+ case SEC_TONE_OFF:
+ set_tuner_tone(adapter, 0);
+ break;
+ default:
+ return -EINVAL;
+ };
+
+ return 0;
+}
+
+static int flexcop_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
+ {
+ struct adapter* adapter = (struct adapter*) fe->dvb->priv;
+
+ send_diseqc_msg(adapter, cmd->msg_len, cmd->msg, 0);
+
+ return 0;
+ }
+
+static int flexcop_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
+{
+ struct adapter* adapter = (struct adapter*) fe->dvb->priv;
+
+ send_diseqc_msg(adapter, 0, NULL, minicmd);
+
+ return 0;
+}
+
+static int flexcop_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
+ {
+ struct adapter* adapter = (struct adapter*) fe->dvb->priv;
+
+ dprintk("%s: FE_SET_VOLTAGE\n", __FUNCTION__);
+
+ switch (voltage) {
+ case SEC_VOLTAGE_13:
+ dprintk("%s: SEC_VOLTAGE_13, %x\n", __FUNCTION__, SEC_VOLTAGE_13);
+ set_tuner_polarity(adapter, 1);
+ return 0;
+
+ case SEC_VOLTAGE_18:
+ dprintk("%s: SEC_VOLTAGE_18, %x\n", __FUNCTION__, SEC_VOLTAGE_18);
+ set_tuner_polarity(adapter, 2);
+ return 0;
+
+ default:
+ return -EINVAL;
+ }
+ }
+
+static int flexcop_sleep(struct dvb_frontend* fe)
+ {
+ struct adapter* adapter = (struct adapter*) fe->dvb->priv;
+
+ dprintk("%s: FE_SLEEP\n", __FUNCTION__);
+ set_tuner_polarity(adapter, 0);
+
+ if (adapter->fe_sleep) return adapter->fe_sleep(fe);
+ return 0;
+ }
+
+static u32 flexcop_i2c_func(struct i2c_adapter *adapter)
+ {
+ printk("flexcop_i2c_func\n");
+
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm flexcop_algo = {
+ .name = "flexcop i2c algorithm",
+ .id = I2C_ALGO_BIT,
+ .master_xfer = master_xfer,
+ .functionality = flexcop_i2c_func,
+};
+
+
+
+
+static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
+{
+ u8 aclk = 0;
+ u8 bclk = 0;
+
+ if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
+ else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
+ else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
+ else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
+ else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
+ else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
+
+ stv0299_writereg (fe, 0x13, aclk);
+ stv0299_writereg (fe, 0x14, bclk);
+ stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff);
+ stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff);
+ stv0299_writereg (fe, 0x21, (ratio ) & 0xf0);
+
+ return 0;
+}
+
+static int samsung_tbmu24112_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+ u8 buf[4];
+ u32 div;
+ struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
+ struct adapter* adapter = (struct adapter*) fe->dvb->priv;
+
+ div = params->frequency / 125;
+
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = div & 0xff;
+ buf[2] = 0x84; // 0xC4
+ buf[3] = 0x08;
+
+ if (params->frequency < 1500000) buf[3] |= 0x10;
+
+ if (i2c_transfer (&adapter->i2c_adap, &msg, 1) != 1) return -EIO;
+ return 0;
+}
+
+static u8 samsung_tbmu24112_inittab[] = {
+ 0x01, 0x15,
+ 0x02, 0x30,
+ 0x03, 0x00,
+ 0x04, 0x7D,
+ 0x05, 0x35,
+ 0x06, 0x02,
+ 0x07, 0x00,
+ 0x08, 0xC3,
+ 0x0C, 0x00,
+ 0x0D, 0x81,
+ 0x0E, 0x23,
+ 0x0F, 0x12,
+ 0x10, 0x7E,
+ 0x11, 0x84,
+ 0x12, 0xB9,
+ 0x13, 0x88,
+ 0x14, 0x89,
+ 0x15, 0xC9,
+ 0x16, 0x00,
+ 0x17, 0x5C,
+ 0x18, 0x00,
+ 0x19, 0x00,
+ 0x1A, 0x00,
+ 0x1C, 0x00,
+ 0x1D, 0x00,
+ 0x1E, 0x00,
+ 0x1F, 0x3A,
+ 0x20, 0x2E,
+ 0x21, 0x80,
+ 0x22, 0xFF,
+ 0x23, 0xC1,
+ 0x28, 0x00,
+ 0x29, 0x1E,
+ 0x2A, 0x14,
+ 0x2B, 0x0F,
+ 0x2C, 0x09,
+ 0x2D, 0x05,
+ 0x31, 0x1F,
+ 0x32, 0x19,
+ 0x33, 0xFE,
+ 0x34, 0x93,
+ 0xff, 0xff,
+ };
+
+static struct stv0299_config samsung_tbmu24112_config = {
+ .demod_address = 0x68,
+ .inittab = samsung_tbmu24112_inittab,
+ .mclk = 88000000UL,
+ .invert = 0,
+ .enhanced_tuning = 0,
+ .skip_reinit = 0,
+ .lock_output = STV0229_LOCKOUTPUT_LK,
+ .volt13_op0_op1 = STV0299_VOLT13_OP1,
+ .min_delay_ms = 100,
+ .set_symbol_rate = samsung_tbmu24112_set_symbol_rate,
+ .pll_set = samsung_tbmu24112_pll_set,
+};
+
+
+
+static int nxt2002_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
+{
+ struct adapter* adapter = (struct adapter*) fe->dvb->priv;
+
+ return request_firmware(fw, name, &adapter->pdev->dev);
+}
+
+
+static struct nxt2002_config samsung_tbmv_config = {
+ .demod_address = 0x0A,
+ .request_firmware = nxt2002_request_firmware,
+};
+
+static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe)
+{
+ static u8 mt352_clock_config [] = { 0x89, 0x18, 0x2d };
+ static u8 mt352_reset [] = { 0x50, 0x80 };
+ static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
+ static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 };
+ static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
+
+ mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
+ udelay(2000);
+ mt352_write(fe, mt352_reset, sizeof(mt352_reset));
+ mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
+
+ mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
+ mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
+
+ return 0;
+}
+
+static int samsung_tdtc9251dh0_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pllbuf)
+{
+ u32 div;
+ unsigned char bs = 0;
+
+ #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */
+ div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
+
+ if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09;
+ if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a;
+ if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08;
+
+ pllbuf[0] = 0xc2; // Note: non-linux standard PLL i2c address
+ pllbuf[1] = div >> 8;
+ pllbuf[2] = div & 0xff;
+ pllbuf[3] = 0xcc;
+ pllbuf[4] = bs;
+
+ return 0;
+}
+
+static struct mt352_config samsung_tdtc9251dh0_config = {
+
+ .demod_address = 0x0f,
+ .demod_init = samsung_tdtc9251dh0_demod_init,
+ .pll_set = samsung_tdtc9251dh0_pll_set,
+};
+
+static int skystar23_samsung_tbdu18132_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+ u8 buf[4];
+ u32 div;
+ struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
+ struct adapter* adapter = (struct adapter*) fe->dvb->priv;
+
+ div = (params->frequency + (125/2)) / 125;
+
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = (div >> 0) & 0xff;
+ buf[2] = 0x84 | ((div >> 10) & 0x60);
+ buf[3] = 0x80;
+
+ if (params->frequency < 1550000)
+ buf[3] |= 0x02;
+
+ if (i2c_transfer (&adapter->i2c_adap, &msg, 1) != 1) return -EIO;
+ return 0;
+}
+
+static struct mt312_config skystar23_samsung_tbdu18132_config = {
+
+ .demod_address = 0x0e,
+ .pll_set = skystar23_samsung_tbdu18132_pll_set,
+};
+
+
+
+
+static void frontend_init(struct adapter *skystar2)
+{
+ switch(skystar2->pdev->device) {
+ case 0x2103: // Technisat Skystar2 OR Technisat Airstar2 (DVB-T or ATSC)
+
+ // Attempt to load the Nextwave nxt2002 for ATSC support
+ skystar2->fe = nxt2002_attach(&samsung_tbmv_config, &skystar2->i2c_adap);
+ if (skystar2->fe != NULL) {
+ skystar2->fe_sleep = skystar2->fe->ops->sleep;
+ skystar2->fe->ops->sleep = flexcop_sleep;
+ break;
+ }
+
+ // try the skystar2 v2.6 first (stv0299/Samsung tbmu24112(sl1935))
+ skystar2->fe = stv0299_attach(&samsung_tbmu24112_config, &skystar2->i2c_adap);
+ if (skystar2->fe != NULL) {
+ skystar2->fe->ops->set_voltage = flexcop_set_voltage;
+ skystar2->fe_sleep = skystar2->fe->ops->sleep;
+ skystar2->fe->ops->sleep = flexcop_sleep;
+ break;
+}
+
+ // try the airstar2 (mt352/Samsung tdtc9251dh0(??))
+ skystar2->fe = mt352_attach(&samsung_tdtc9251dh0_config, &skystar2->i2c_adap);
+ if (skystar2->fe != NULL) {
+ skystar2->fe->ops->info.frequency_min = 474000000;
+ skystar2->fe->ops->info.frequency_max = 858000000;
+ break;
+ }
+
+ // try the skystar2 v2.3 (vp310/Samsung tbdu18132(tsa5059))
+ skystar2->fe = vp310_attach(&skystar23_samsung_tbdu18132_config, &skystar2->i2c_adap);
+ if (skystar2->fe != NULL) {
+ skystar2->fe->ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
+ skystar2->fe->ops->diseqc_send_burst = flexcop_diseqc_send_burst;
+ skystar2->fe->ops->set_tone = flexcop_set_tone;
+ skystar2->fe->ops->set_voltage = flexcop_set_voltage;
+ skystar2->fe_sleep = skystar2->fe->ops->sleep;
+ skystar2->fe->ops->sleep = flexcop_sleep;
+ break;
+ }
+ break;
+ }
+
+ if (skystar2->fe == NULL) {
+ printk("skystar2: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n",
+ skystar2->pdev->vendor,
+ skystar2->pdev->device,
+ skystar2->pdev->subsystem_vendor,
+ skystar2->pdev->subsystem_device);
+ } else {
+ if (dvb_register_frontend(skystar2->dvb_adapter, skystar2->fe)) {
+ printk("skystar2: Frontend registration failed!\n");
+ if (skystar2->fe->ops->release)
+ skystar2->fe->ops->release(skystar2->fe);
+ skystar2->fe = NULL;
+ }
+ }
+}
+
+
+static int skystar2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ struct adapter *adapter;
+ struct dvb_adapter *dvb_adapter;
+ struct dvb_demux *dvbdemux;
+ struct dmx_demux *dmx;
+ int ret = -ENODEV;
+
+ if (!pdev)
+ goto out;
+
+ ret = driver_initialize(pdev);
+ if (ret < 0)
+ goto out;
+
+ ret = dvb_register_adapter(&dvb_adapter, skystar2_pci_driver.name,
+ THIS_MODULE);
+ if (ret < 0) {
+ printk("%s: Error registering DVB adapter\n", __FUNCTION__);
+ goto err_halt;
+ }
+
+ adapter = pci_get_drvdata(pdev);
+
+ dvb_adapter->priv = adapter;
+ adapter->dvb_adapter = dvb_adapter;
+
+
+ init_MUTEX(&adapter->i2c_sem);
+
+
+ memset(&adapter->i2c_adap, 0, sizeof(struct i2c_adapter));
+ strcpy(adapter->i2c_adap.name, "SkyStar2");
+
+ i2c_set_adapdata(&adapter->i2c_adap, adapter);
+
+#ifdef I2C_ADAP_CLASS_TV_DIGITAL
+ adapter->i2c_adap.class = I2C_ADAP_CLASS_TV_DIGITAL;
+#else
+ adapter->i2c_adap.class = I2C_CLASS_TV_DIGITAL;
+#endif
+ adapter->i2c_adap.algo = &flexcop_algo;
+ adapter->i2c_adap.algo_data = NULL;
+ adapter->i2c_adap.id = I2C_ALGO_BIT;
+
+ ret = i2c_add_adapter(&adapter->i2c_adap);
+ if (ret < 0)
+ goto err_dvb_unregister;
+
+ dvbdemux = &adapter->demux;
+
+ dvbdemux->priv = adapter;
+ dvbdemux->filternum = N_PID_SLOTS;
+ dvbdemux->feednum = N_PID_SLOTS;
+ dvbdemux->start_feed = dvb_start_feed;
+ dvbdemux->stop_feed = dvb_stop_feed;
+ dvbdemux->write_to_decoder = NULL;
+ dvbdemux->dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING);
+
+ ret = dvb_dmx_init(&adapter->demux);
+ if (ret < 0)
+ goto err_i2c_del;
+
+ dmx = &dvbdemux->dmx;
+
+ adapter->hw_frontend.source = DMX_FRONTEND_0;
+ adapter->dmxdev.filternum = N_PID_SLOTS;
+ adapter->dmxdev.demux = dmx;
+ adapter->dmxdev.capabilities = 0;
+
+ ret = dvb_dmxdev_init(&adapter->dmxdev, adapter->dvb_adapter);
+ if (ret < 0)
+ goto err_dmx_release;
+
+ ret = dmx->add_frontend(dmx, &adapter->hw_frontend);
+ if (ret < 0)
+ goto err_dmxdev_release;
+
+ adapter->mem_frontend.source = DMX_MEMORY_FE;
+
+ ret = dmx->add_frontend(dmx, &adapter->mem_frontend);
+ if (ret < 0)
+ goto err_remove_hw_frontend;
+
+ ret = dmx->connect_frontend(dmx, &adapter->hw_frontend);
+ if (ret < 0)
+ goto err_remove_mem_frontend;
+
+ dvb_net_init(adapter->dvb_adapter, &adapter->dvbnet, &dvbdemux->dmx);
+
+ frontend_init(adapter);
+out:
+ return ret;
+
+err_remove_mem_frontend:
+ dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &adapter->mem_frontend);
+err_remove_hw_frontend:
+ dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &adapter->hw_frontend);
+err_dmxdev_release:
+ dvb_dmxdev_release(&adapter->dmxdev);
+err_dmx_release:
+ dvb_dmx_release(&adapter->demux);
+err_i2c_del:
+ i2c_del_adapter(&adapter->i2c_adap);
+err_dvb_unregister:
+ dvb_unregister_adapter(adapter->dvb_adapter);
+err_halt:
+ driver_halt(pdev);
+ goto out;
+}
+
+static void skystar2_remove(struct pci_dev *pdev)
+{
+ struct adapter *adapter = pci_get_drvdata(pdev);
+ struct dvb_demux *dvbdemux;
+ struct dmx_demux *dmx;
+
+ if (!adapter)
+ return;
+
+ dvb_net_release(&adapter->dvbnet);
+ dvbdemux = &adapter->demux;
+ dmx = &dvbdemux->dmx;
+
+ dmx->close(dmx);
+ dmx->remove_frontend(dmx, &adapter->hw_frontend);
+ dmx->remove_frontend(dmx, &adapter->mem_frontend);
+
+ dvb_dmxdev_release(&adapter->dmxdev);
+ dvb_dmx_release(dvbdemux);
+
+ if (adapter->fe != NULL)
+ dvb_unregister_frontend(adapter->fe);
+
+ dvb_unregister_adapter(adapter->dvb_adapter);
+
+ i2c_del_adapter(&adapter->i2c_adap);
+
+ driver_halt(pdev);
+ }
+
+static struct pci_device_id skystar2_pci_tbl[] = {
+ {0x000013d0, 0x00002103, 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, 0x00000000},
+/* {0x000013d0, 0x00002200, 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, 0x00000000}, UNDEFINED HARDWARE - mail linuxtv.org list */ //FCIII
+ {0,},
+};
+
+MODULE_DEVICE_TABLE(pci, skystar2_pci_tbl);
+
+static struct pci_driver skystar2_pci_driver = {
+ .name = "SkyStar2",
+ .id_table = skystar2_pci_tbl,
+ .probe = skystar2_probe,
+ .remove = skystar2_remove,
+};
+
+static int skystar2_init(void)
+{
+ return pci_register_driver(&skystar2_pci_driver);
+}
+
+static void skystar2_cleanup(void)
+{
+ pci_unregister_driver(&skystar2_pci_driver);
+}
+
+module_init(skystar2_init);
+module_exit(skystar2_cleanup);
+
+MODULE_DESCRIPTION("Technisat SkyStar2 DVB PCI Driver");
+MODULE_LICENSE("GPL");
OpenPOWER on IntegriCloud