[media] move the dvb/frontends to drivers/media/dvb-frontends

Raise the DVB frontends one level up, as the intention is to remove
the drivers/media/dvb directory.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 75 insertions, 0 deletions

diff --git a/drivers/media/dvb-frontends/atbm8830_priv.h b/drivers/media/dvb-frontends/atbm8830_priv.h
new file mode 100644
index 000000000000..d460058d497e
--- /dev/null
+++ b/drivers/media/dvb-frontends/atbm8830_priv.h
@@ -0,0 +1,75 @@
+/*
+ *    Support for AltoBeam GB20600 (a.k.a DMB-TH) demodulator
+ *    ATBM8830, ATBM8831
+ *
+ *    Copyright (C) 2009 David T.L. Wong <davidtlwong@gmail.com>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ATBM8830_PRIV_H
+#define __ATBM8830_PRIV_H
+
+struct atbm_state {
+	struct i2c_adapter *i2c;
+	/* configuration settings */
+	const struct atbm8830_config *config;
+	struct dvb_frontend frontend;
+};
+
+#define REG_CHIP_ID	0x0000
+#define REG_TUNER_BASEBAND	0x0001
+#define REG_DEMOD_RUN	0x0004
+#define REG_DSP_RESET	0x0005
+#define REG_RAM_RESET	0x0006
+#define REG_ADC_RESET	0x0007
+#define REG_TSPORT_RESET	0x0008
+#define REG_BLKERR_POL	0x000C
+#define REG_I2C_GATE	0x0103
+#define REG_TS_SAMPLE_EDGE	0x0301
+#define REG_TS_PKT_LEN_204	0x0302
+#define REG_TS_PKT_LEN_AUTO	0x0303
+#define REG_TS_SERIAL	0x0305
+#define REG_TS_CLK_FREERUN	0x0306
+#define REG_TS_VALID_MODE	0x0307
+#define REG_TS_CLK_MODE	0x030B /* 1 for serial, 0 for parallel */
+
+#define REG_TS_ERRBIT_USE	0x030C
+#define REG_LOCK_STATUS	0x030D
+#define REG_ADC_CONFIG	0x0602
+#define REG_CARRIER_OFFSET	0x0827 /* 0x0827-0x0829 little endian */
+#define REG_DETECTED_PN_MODE	0x082D
+#define REG_READ_LATCH	0x084D
+#define REG_IF_FREQ	0x0A00 /* 0x0A00-0x0A02 little endian */
+#define REG_OSC_CLK	0x0A03 /* 0x0A03-0x0A05 little endian */
+#define REG_BYPASS_CCI	0x0A06
+#define REG_ANALOG_LUMA_DETECTED	0x0A25
+#define REG_ANALOG_AUDIO_DETECTED	0x0A26
+#define REG_ANALOG_CHROMA_DETECTED	0x0A39
+#define REG_FRAME_ERR_CNT	0x0B04
+#define REG_USE_EXT_ADC	0x0C00
+#define REG_SWAP_I_Q	0x0C01
+#define REG_TPS_MANUAL	0x0D01
+#define REG_TPS_CONFIG	0x0D02
+#define REG_BYPASS_DEINTERLEAVER	0x0E00
+#define REG_AGC_TARGET	0x1003 /* 0x1003-0x1005 little endian */
+#define REG_AGC_MIN	0x1020
+#define REG_AGC_MAX	0x1023
+#define REG_AGC_LOCK	0x1027
+#define REG_AGC_PWM_VAL	0x1028 /* 0x1028-0x1029 little endian */
+#define REG_AGC_HOLD_LOOP	0x1031
+
+#endif
+