summaryrefslogtreecommitdiffstats
path: root/drivers/md/raid5.c
diff options
context:
space:
mode:
authorNeilBrown <neilb@suse.de>2006-03-27 01:18:09 -0800
committerLinus Torvalds <torvalds@g5.osdl.org>2006-03-27 08:45:01 -0800
commitccfcc3c10b2a5cb8fd3c918199a4ff904fc6fb3e (patch)
tree0c86fe6ba0f0bafd76f86f81b7425d6d497664aa /drivers/md/raid5.c
parent7ecaa1e6a1ad69862e9980b6c777e11f26c4782d (diff)
downloadblackbird-op-linux-ccfcc3c10b2a5cb8fd3c918199a4ff904fc6fb3e.tar.gz
blackbird-op-linux-ccfcc3c10b2a5cb8fd3c918199a4ff904fc6fb3e.zip
[PATCH] md: Core of raid5 resize process
This patch provides the core of the resize/expand process. sync_request notices if a 'reshape' is happening and acts accordingly. It allocated new stripe_heads for the next chunk-wide-stripe in the target geometry, marking them STRIPE_EXPANDING. Then it finds which stripe heads in the old geometry can provide data needed by these and marks them STRIPE_EXPAND_SOURCE. This causes stripe_handle to read all blocks on those stripes. Once all blocks on a STRIPE_EXPAND_SOURCE stripe_head are read, any that are needed are copied into the corresponding STRIPE_EXPANDING stripe_head. Once a STRIPE_EXPANDING stripe_head is full, it is marks STRIPE_EXPAND_READY and then is written out and released. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'drivers/md/raid5.c')
-rw-r--r--drivers/md/raid5.c185
1 files changed, 163 insertions, 22 deletions
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 7a6df515b008..56cba8d3e398 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -93,11 +93,11 @@ static void __release_stripe(raid5_conf_t *conf, struct stripe_head *sh)
if (atomic_read(&conf->preread_active_stripes) < IO_THRESHOLD)
md_wakeup_thread(conf->mddev->thread);
}
- list_add_tail(&sh->lru, &conf->inactive_list);
atomic_dec(&conf->active_stripes);
- if (!conf->inactive_blocked ||
- atomic_read(&conf->active_stripes) < (conf->max_nr_stripes*3/4))
+ if (!test_bit(STRIPE_EXPANDING, &sh->state)) {
+ list_add_tail(&sh->lru, &conf->inactive_list);
wake_up(&conf->wait_for_stripe);
+ }
}
}
}
@@ -273,9 +273,8 @@ static struct stripe_head *get_active_stripe(raid5_conf_t *conf, sector_t sector
} else {
if (!test_bit(STRIPE_HANDLE, &sh->state))
atomic_inc(&conf->active_stripes);
- if (list_empty(&sh->lru))
- BUG();
- list_del_init(&sh->lru);
+ if (!list_empty(&sh->lru))
+ list_del_init(&sh->lru);
}
}
} while (sh == NULL);
@@ -1035,6 +1034,18 @@ static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx, in
return 0;
}
+static int stripe_to_pdidx(sector_t stripe, raid5_conf_t *conf, int disks)
+{
+ int sectors_per_chunk = conf->chunk_size >> 9;
+ sector_t x = stripe;
+ int pd_idx, dd_idx;
+ int chunk_offset = sector_div(x, sectors_per_chunk);
+ stripe = x;
+ raid5_compute_sector(stripe*(disks-1)*sectors_per_chunk
+ + chunk_offset, disks, disks-1, &dd_idx, &pd_idx, conf);
+ return pd_idx;
+}
+
/*
* handle_stripe - do things to a stripe.
@@ -1061,7 +1072,7 @@ static void handle_stripe(struct stripe_head *sh)
struct bio *return_bi= NULL;
struct bio *bi;
int i;
- int syncing;
+ int syncing, expanding, expanded;
int locked=0, uptodate=0, to_read=0, to_write=0, failed=0, written=0;
int non_overwrite = 0;
int failed_num=0;
@@ -1076,6 +1087,8 @@ static void handle_stripe(struct stripe_head *sh)
clear_bit(STRIPE_DELAYED, &sh->state);
syncing = test_bit(STRIPE_SYNCING, &sh->state);
+ expanding = test_bit(STRIPE_EXPAND_SOURCE, &sh->state);
+ expanded = test_bit(STRIPE_EXPAND_READY, &sh->state);
/* Now to look around and see what can be done */
rcu_read_lock();
@@ -1268,13 +1281,14 @@ static void handle_stripe(struct stripe_head *sh)
* parity, or to satisfy requests
* or to load a block that is being partially written.
*/
- if (to_read || non_overwrite || (syncing && (uptodate < disks))) {
+ if (to_read || non_overwrite || (syncing && (uptodate < disks)) || expanding) {
for (i=disks; i--;) {
dev = &sh->dev[i];
if (!test_bit(R5_LOCKED, &dev->flags) && !test_bit(R5_UPTODATE, &dev->flags) &&
(dev->toread ||
(dev->towrite && !test_bit(R5_OVERWRITE, &dev->flags)) ||
syncing ||
+ expanding ||
(failed && (sh->dev[failed_num].toread ||
(sh->dev[failed_num].towrite && !test_bit(R5_OVERWRITE, &sh->dev[failed_num].flags))))
)
@@ -1464,13 +1478,76 @@ static void handle_stripe(struct stripe_head *sh)
set_bit(R5_Wantwrite, &dev->flags);
set_bit(R5_ReWrite, &dev->flags);
set_bit(R5_LOCKED, &dev->flags);
+ locked++;
} else {
/* let's read it back */
set_bit(R5_Wantread, &dev->flags);
set_bit(R5_LOCKED, &dev->flags);
+ locked++;
}
}
+ if (expanded && test_bit(STRIPE_EXPANDING, &sh->state)) {
+ /* Need to write out all blocks after computing parity */
+ sh->disks = conf->raid_disks;
+ sh->pd_idx = stripe_to_pdidx(sh->sector, conf, conf->raid_disks);
+ compute_parity(sh, RECONSTRUCT_WRITE);
+ for (i= conf->raid_disks; i--;) {
+ set_bit(R5_LOCKED, &sh->dev[i].flags);
+ locked++;
+ set_bit(R5_Wantwrite, &sh->dev[i].flags);
+ }
+ clear_bit(STRIPE_EXPANDING, &sh->state);
+ } else if (expanded) {
+ clear_bit(STRIPE_EXPAND_READY, &sh->state);
+ wake_up(&conf->wait_for_overlap);
+ md_done_sync(conf->mddev, STRIPE_SECTORS, 1);
+ }
+
+ if (expanding && locked == 0) {
+ /* We have read all the blocks in this stripe and now we need to
+ * copy some of them into a target stripe for expand.
+ */
+ clear_bit(STRIPE_EXPAND_SOURCE, &sh->state);
+ for (i=0; i< sh->disks; i++)
+ if (i != sh->pd_idx) {
+ int dd_idx, pd_idx, j;
+ struct stripe_head *sh2;
+
+ sector_t bn = compute_blocknr(sh, i);
+ sector_t s = raid5_compute_sector(bn, conf->raid_disks,
+ conf->raid_disks-1,
+ &dd_idx, &pd_idx, conf);
+ sh2 = get_active_stripe(conf, s, conf->raid_disks, pd_idx, 1);
+ if (sh2 == NULL)
+ /* so far only the early blocks of this stripe
+ * have been requested. When later blocks
+ * get requested, we will try again
+ */
+ continue;
+ if(!test_bit(STRIPE_EXPANDING, &sh2->state) ||
+ test_bit(R5_Expanded, &sh2->dev[dd_idx].flags)) {
+ /* must have already done this block */
+ release_stripe(sh2);
+ continue;
+ }
+ memcpy(page_address(sh2->dev[dd_idx].page),
+ page_address(sh->dev[i].page),
+ STRIPE_SIZE);
+ set_bit(R5_Expanded, &sh2->dev[dd_idx].flags);
+ set_bit(R5_UPTODATE, &sh2->dev[dd_idx].flags);
+ for (j=0; j<conf->raid_disks; j++)
+ if (j != sh2->pd_idx &&
+ !test_bit(R5_Expanded, &sh2->dev[j].flags))
+ break;
+ if (j == conf->raid_disks) {
+ set_bit(STRIPE_EXPAND_READY, &sh2->state);
+ set_bit(STRIPE_HANDLE, &sh2->state);
+ }
+ release_stripe(sh2);
+ }
+ }
+
spin_unlock(&sh->lock);
while ((bi=return_bi)) {
@@ -1509,7 +1586,7 @@ static void handle_stripe(struct stripe_head *sh)
rcu_read_unlock();
if (rdev) {
- if (syncing)
+ if (syncing || expanding || expanded)
md_sync_acct(rdev->bdev, STRIPE_SECTORS);
bi->bi_bdev = rdev->bdev;
@@ -1757,12 +1834,8 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i
{
raid5_conf_t *conf = (raid5_conf_t *) mddev->private;
struct stripe_head *sh;
- int sectors_per_chunk = conf->chunk_size >> 9;
- sector_t x;
- unsigned long stripe;
- int chunk_offset;
- int dd_idx, pd_idx;
- sector_t first_sector;
+ int pd_idx;
+ sector_t first_sector, last_sector;
int raid_disks = conf->raid_disks;
int data_disks = raid_disks-1;
sector_t max_sector = mddev->size << 1;
@@ -1781,6 +1854,80 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i
return 0;
}
+
+ if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery)) {
+ /* reshaping is quite different to recovery/resync so it is
+ * handled quite separately ... here.
+ *
+ * On each call to sync_request, we gather one chunk worth of
+ * destination stripes and flag them as expanding.
+ * Then we find all the source stripes and request reads.
+ * As the reads complete, handle_stripe will copy the data
+ * into the destination stripe and release that stripe.
+ */
+ int i;
+ int dd_idx;
+ for (i=0; i < conf->chunk_size/512; i+= STRIPE_SECTORS) {
+ int j;
+ int skipped = 0;
+ pd_idx = stripe_to_pdidx(sector_nr+i, conf, conf->raid_disks);
+ sh = get_active_stripe(conf, sector_nr+i,
+ conf->raid_disks, pd_idx, 0);
+ set_bit(STRIPE_EXPANDING, &sh->state);
+ /* If any of this stripe is beyond the end of the old
+ * array, then we need to zero those blocks
+ */
+ for (j=sh->disks; j--;) {
+ sector_t s;
+ if (j == sh->pd_idx)
+ continue;
+ s = compute_blocknr(sh, j);
+ if (s < (mddev->array_size<<1)) {
+ skipped = 1;
+ continue;
+ }
+ memset(page_address(sh->dev[j].page), 0, STRIPE_SIZE);
+ set_bit(R5_Expanded, &sh->dev[j].flags);
+ set_bit(R5_UPTODATE, &sh->dev[j].flags);
+ }
+ if (!skipped) {
+ set_bit(STRIPE_EXPAND_READY, &sh->state);
+ set_bit(STRIPE_HANDLE, &sh->state);
+ }
+ release_stripe(sh);
+ }
+ spin_lock_irq(&conf->device_lock);
+ conf->expand_progress = (sector_nr + i)*(conf->raid_disks-1);
+ spin_unlock_irq(&conf->device_lock);
+ /* Ok, those stripe are ready. We can start scheduling
+ * reads on the source stripes.
+ * The source stripes are determined by mapping the first and last
+ * block on the destination stripes.
+ */
+ raid_disks = conf->previous_raid_disks;
+ data_disks = raid_disks - 1;
+ first_sector =
+ raid5_compute_sector(sector_nr*(conf->raid_disks-1),
+ raid_disks, data_disks,
+ &dd_idx, &pd_idx, conf);
+ last_sector =
+ raid5_compute_sector((sector_nr+conf->chunk_size/512)
+ *(conf->raid_disks-1) -1,
+ raid_disks, data_disks,
+ &dd_idx, &pd_idx, conf);
+ if (last_sector >= (mddev->size<<1))
+ last_sector = (mddev->size<<1)-1;
+ while (first_sector <= last_sector) {
+ pd_idx = stripe_to_pdidx(first_sector, conf, conf->previous_raid_disks);
+ sh = get_active_stripe(conf, first_sector,
+ conf->previous_raid_disks, pd_idx, 0);
+ set_bit(STRIPE_EXPAND_SOURCE, &sh->state);
+ set_bit(STRIPE_HANDLE, &sh->state);
+ release_stripe(sh);
+ first_sector += STRIPE_SECTORS;
+ }
+ return conf->chunk_size>>9;
+ }
/* if there is 1 or more failed drives and we are trying
* to resync, then assert that we are finished, because there is
* nothing we can do.
@@ -1799,13 +1946,7 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i
return sync_blocks * STRIPE_SECTORS; /* keep things rounded to whole stripes */
}
- x = sector_nr;
- chunk_offset = sector_div(x, sectors_per_chunk);
- stripe = x;
- BUG_ON(x != stripe);
-
- first_sector = raid5_compute_sector((sector_t)stripe*data_disks*sectors_per_chunk
- + chunk_offset, raid_disks, data_disks, &dd_idx, &pd_idx, conf);
+ pd_idx = stripe_to_pdidx(sector_nr, conf, raid_disks);
sh = get_active_stripe(conf, sector_nr, raid_disks, pd_idx, 1);
if (sh == NULL) {
sh = get_active_stripe(conf, sector_nr, raid_disks, pd_idx, 0);
OpenPOWER on IntegriCloud