summaryrefslogtreecommitdiffstats
path: root/drivers/leds
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-01-13 20:43:32 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2012-01-13 20:43:32 -0800
commit21ebd6c68b5511b55f4f456e4ba17c2d711e3617 (patch)
tree2f4f98568a7a52ab6734fb190d0cbf6f9c1c6492 /drivers/leds
parent4b8be38cf782f8ebebc089083fa0572ade79d7ca (diff)
parent74d836c4142e5d100f8d9a1b2ee3003c2ed7109d (diff)
downloadblackbird-op-linux-21ebd6c68b5511b55f4f456e4ba17c2d711e3617.tar.gz
blackbird-op-linux-21ebd6c68b5511b55f4f456e4ba17c2d711e3617.zip
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits) rtc: max8925: Add function to work as wakeup source mfd: Add pm ops to max8925 mfd: Convert aat2870 to dev_pm_ops mfd: Still check other interrupts if we get a wm831x touchscreen IRQ mfd: Introduce missing kfree in 88pm860x probe routine mfd: Add S5M series configuration mfd: Add s5m series irq driver mfd: Add S5M core driver mfd: Improve mc13xxx dt binding document mfd: Fix stmpe section mismatch mfd: Fix stmpe build warning mfd: Fix STMPE I2c build failure mfd: Constify aat2870-core i2c_device_id table gpio: Add support for stmpe variant 801 mfd: Add support for stmpe variant 801 mfd: Add support for stmpe variant 610 mfd: Add support for STMPE SPI interface mfd: Separate out STMPE controller and interface specific code misc: Remove max8997-muic sysfs attributes mfd: Remove unused wm831x_irq_data_to_mask_reg() ... Fix up trivial conflict in drivers/leds/Kconfig due to addition of LEDS_MAX8997 and LEDS_TCA6507 next to each other.
Diffstat (limited to 'drivers/leds')
-rw-r--r--drivers/leds/Kconfig7
-rw-r--r--drivers/leds/Makefile1
-rw-r--r--drivers/leds/leds-max8997.c372
3 files changed, 380 insertions, 0 deletions
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 897a77dfa9d7..c957c344233f 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -396,6 +396,13 @@ config LEDS_TCA6507
LED driver chips accessed via the I2C bus.
Driver support brightness control and hardware-assisted blinking.
+config LEDS_MAX8997
+ tristate "LED support for MAX8997 PMIC"
+ depends on LEDS_CLASS && MFD_MAX8997
+ help
+ This option enables support for on-chip LED drivers on
+ MAXIM MAX8997 PMIC.
+
config LEDS_TRIGGERS
bool "LED Trigger support"
depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 5c9dc4b000d5..b8a9723477f0 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_LEDS_NS2) += leds-ns2.o
obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o
obj-$(CONFIG_LEDS_RENESAS_TPU) += leds-renesas-tpu.o
+obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o
# LED SPI Drivers
obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
diff --git a/drivers/leds/leds-max8997.c b/drivers/leds/leds-max8997.c
new file mode 100644
index 000000000000..f4c0e37fad1e
--- /dev/null
+++ b/drivers/leds/leds-max8997.c
@@ -0,0 +1,372 @@
+/*
+ * leds-max8997.c - LED class driver for MAX8997 LEDs.
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ * Donggeun Kim <dg77.kim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/leds.h>
+#include <linux/mfd/max8997.h>
+#include <linux/mfd/max8997-private.h>
+#include <linux/platform_device.h>
+
+#define MAX8997_LED_FLASH_SHIFT 3
+#define MAX8997_LED_FLASH_CUR_MASK 0xf8
+#define MAX8997_LED_MOVIE_SHIFT 4
+#define MAX8997_LED_MOVIE_CUR_MASK 0xf0
+
+#define MAX8997_LED_FLASH_MAX_BRIGHTNESS 0x1f
+#define MAX8997_LED_MOVIE_MAX_BRIGHTNESS 0xf
+#define MAX8997_LED_NONE_MAX_BRIGHTNESS 0
+
+#define MAX8997_LED0_FLASH_MASK 0x1
+#define MAX8997_LED0_FLASH_PIN_MASK 0x5
+#define MAX8997_LED0_MOVIE_MASK 0x8
+#define MAX8997_LED0_MOVIE_PIN_MASK 0x28
+
+#define MAX8997_LED1_FLASH_MASK 0x2
+#define MAX8997_LED1_FLASH_PIN_MASK 0x6
+#define MAX8997_LED1_MOVIE_MASK 0x10
+#define MAX8997_LED1_MOVIE_PIN_MASK 0x30
+
+#define MAX8997_LED_BOOST_ENABLE_MASK (1 << 6)
+
+struct max8997_led {
+ struct max8997_dev *iodev;
+ struct led_classdev cdev;
+ bool enabled;
+ int id;
+ enum max8997_led_mode led_mode;
+ struct mutex mutex;
+};
+
+static void max8997_led_clear_mode(struct max8997_led *led,
+ enum max8997_led_mode mode)
+{
+ struct i2c_client *client = led->iodev->i2c;
+ u8 val = 0, mask = 0;
+ int ret;
+
+ switch (mode) {
+ case MAX8997_FLASH_MODE:
+ mask = led->id ?
+ MAX8997_LED1_FLASH_MASK : MAX8997_LED0_FLASH_MASK;
+ break;
+ case MAX8997_MOVIE_MODE:
+ mask = led->id ?
+ MAX8997_LED1_MOVIE_MASK : MAX8997_LED0_MOVIE_MASK;
+ break;
+ case MAX8997_FLASH_PIN_CONTROL_MODE:
+ mask = led->id ?
+ MAX8997_LED1_FLASH_PIN_MASK : MAX8997_LED0_FLASH_PIN_MASK;
+ break;
+ case MAX8997_MOVIE_PIN_CONTROL_MODE:
+ mask = led->id ?
+ MAX8997_LED1_MOVIE_PIN_MASK : MAX8997_LED0_MOVIE_PIN_MASK;
+ break;
+ default:
+ break;
+ }
+
+ if (mask) {
+ ret = max8997_update_reg(client,
+ MAX8997_REG_LEN_CNTL, val, mask);
+ if (ret)
+ dev_err(led->iodev->dev,
+ "failed to update register(%d)\n", ret);
+ }
+}
+
+static void max8997_led_set_mode(struct max8997_led *led,
+ enum max8997_led_mode mode)
+{
+ int ret;
+ struct i2c_client *client = led->iodev->i2c;
+ u8 mask = 0;
+
+ /* First, clear the previous mode */
+ max8997_led_clear_mode(led, led->led_mode);
+
+ switch (mode) {
+ case MAX8997_FLASH_MODE:
+ mask = led->id ?
+ MAX8997_LED1_FLASH_MASK : MAX8997_LED0_FLASH_MASK;
+ led->cdev.max_brightness = MAX8997_LED_FLASH_MAX_BRIGHTNESS;
+ break;
+ case MAX8997_MOVIE_MODE:
+ mask = led->id ?
+ MAX8997_LED1_MOVIE_MASK : MAX8997_LED0_MOVIE_MASK;
+ led->cdev.max_brightness = MAX8997_LED_MOVIE_MAX_BRIGHTNESS;
+ break;
+ case MAX8997_FLASH_PIN_CONTROL_MODE:
+ mask = led->id ?
+ MAX8997_LED1_FLASH_PIN_MASK : MAX8997_LED0_FLASH_PIN_MASK;
+ led->cdev.max_brightness = MAX8997_LED_FLASH_MAX_BRIGHTNESS;
+ break;
+ case MAX8997_MOVIE_PIN_CONTROL_MODE:
+ mask = led->id ?
+ MAX8997_LED1_MOVIE_PIN_MASK : MAX8997_LED0_MOVIE_PIN_MASK;
+ led->cdev.max_brightness = MAX8997_LED_MOVIE_MAX_BRIGHTNESS;
+ break;
+ default:
+ led->cdev.max_brightness = MAX8997_LED_NONE_MAX_BRIGHTNESS;
+ break;
+ }
+
+ if (mask) {
+ ret = max8997_update_reg(client,
+ MAX8997_REG_LEN_CNTL, mask, mask);
+ if (ret)
+ dev_err(led->iodev->dev,
+ "failed to update register(%d)\n", ret);
+ }
+
+ led->led_mode = mode;
+}
+
+static void max8997_led_enable(struct max8997_led *led, bool enable)
+{
+ int ret;
+ struct i2c_client *client = led->iodev->i2c;
+ u8 val = 0, mask = MAX8997_LED_BOOST_ENABLE_MASK;
+
+ if (led->enabled == enable)
+ return;
+
+ val = enable ? MAX8997_LED_BOOST_ENABLE_MASK : 0;
+
+ ret = max8997_update_reg(client, MAX8997_REG_BOOST_CNTL, val, mask);
+ if (ret)
+ dev_err(led->iodev->dev,
+ "failed to update register(%d)\n", ret);
+
+ led->enabled = enable;
+}
+
+static void max8997_led_set_current(struct max8997_led *led,
+ enum led_brightness value)
+{
+ int ret;
+ struct i2c_client *client = led->iodev->i2c;
+ u8 val = 0, mask = 0, reg = 0;
+
+ switch (led->led_mode) {
+ case MAX8997_FLASH_MODE:
+ case MAX8997_FLASH_PIN_CONTROL_MODE:
+ val = value << MAX8997_LED_FLASH_SHIFT;
+ mask = MAX8997_LED_FLASH_CUR_MASK;
+ reg = led->id ? MAX8997_REG_FLASH2_CUR : MAX8997_REG_FLASH1_CUR;
+ break;
+ case MAX8997_MOVIE_MODE:
+ case MAX8997_MOVIE_PIN_CONTROL_MODE:
+ val = value << MAX8997_LED_MOVIE_SHIFT;
+ mask = MAX8997_LED_MOVIE_CUR_MASK;
+ reg = MAX8997_REG_MOVIE_CUR;
+ break;
+ default:
+ break;
+ }
+
+ if (mask) {
+ ret = max8997_update_reg(client, reg, val, mask);
+ if (ret)
+ dev_err(led->iodev->dev,
+ "failed to update register(%d)\n", ret);
+ }
+}
+
+static void max8997_led_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct max8997_led *led =
+ container_of(led_cdev, struct max8997_led, cdev);
+
+ if (value) {
+ max8997_led_set_current(led, value);
+ max8997_led_enable(led, true);
+ } else {
+ max8997_led_set_current(led, value);
+ max8997_led_enable(led, false);
+ }
+}
+
+static ssize_t max8997_led_show_mode(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct max8997_led *led =
+ container_of(led_cdev, struct max8997_led, cdev);
+ ssize_t ret = 0;
+
+ mutex_lock(&led->mutex);
+
+ switch (led->led_mode) {
+ case MAX8997_FLASH_MODE:
+ ret += sprintf(buf, "FLASH\n");
+ break;
+ case MAX8997_MOVIE_MODE:
+ ret += sprintf(buf, "MOVIE\n");
+ break;
+ case MAX8997_FLASH_PIN_CONTROL_MODE:
+ ret += sprintf(buf, "FLASH_PIN_CONTROL\n");
+ break;
+ case MAX8997_MOVIE_PIN_CONTROL_MODE:
+ ret += sprintf(buf, "MOVIE_PIN_CONTROL\n");
+ break;
+ default:
+ ret += sprintf(buf, "NONE\n");
+ break;
+ }
+
+ mutex_unlock(&led->mutex);
+
+ return ret;
+}
+
+static ssize_t max8997_led_store_mode(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct max8997_led *led =
+ container_of(led_cdev, struct max8997_led, cdev);
+ enum max8997_led_mode mode;
+
+ mutex_lock(&led->mutex);
+
+ if (!strncmp(buf, "FLASH_PIN_CONTROL", 17))
+ mode = MAX8997_FLASH_PIN_CONTROL_MODE;
+ else if (!strncmp(buf, "MOVIE_PIN_CONTROL", 17))
+ mode = MAX8997_MOVIE_PIN_CONTROL_MODE;
+ else if (!strncmp(buf, "FLASH", 5))
+ mode = MAX8997_FLASH_MODE;
+ else if (!strncmp(buf, "MOVIE", 5))
+ mode = MAX8997_MOVIE_MODE;
+ else
+ mode = MAX8997_NONE;
+
+ max8997_led_set_mode(led, mode);
+
+ mutex_unlock(&led->mutex);
+
+ return size;
+}
+
+static DEVICE_ATTR(mode, 0644, max8997_led_show_mode, max8997_led_store_mode);
+
+static int __devinit max8997_led_probe(struct platform_device *pdev)
+{
+ struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+ struct max8997_platform_data *pdata = dev_get_platdata(iodev->dev);
+ struct max8997_led *led;
+ char name[20];
+ int ret = 0;
+
+ if (pdata == NULL) {
+ dev_err(&pdev->dev, "no platform data\n");
+ return -ENODEV;
+ }
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (led == NULL) {
+ ret = -ENOMEM;
+ goto err_mem;
+ }
+
+ led->id = pdev->id;
+ snprintf(name, sizeof(name), "max8997-led%d", pdev->id);
+
+ led->cdev.name = name;
+ led->cdev.brightness_set = max8997_led_brightness_set;
+ led->cdev.flags |= LED_CORE_SUSPENDRESUME;
+ led->cdev.brightness = 0;
+ led->iodev = iodev;
+
+ /* initialize mode and brightness according to platform_data */
+ if (pdata->led_pdata) {
+ u8 mode = 0, brightness = 0;
+
+ mode = pdata->led_pdata->mode[led->id];
+ brightness = pdata->led_pdata->brightness[led->id];
+
+ max8997_led_set_mode(led, pdata->led_pdata->mode[led->id]);
+
+ if (brightness > led->cdev.max_brightness)
+ brightness = led->cdev.max_brightness;
+ max8997_led_set_current(led, brightness);
+ led->cdev.brightness = brightness;
+ } else {
+ max8997_led_set_mode(led, MAX8997_NONE);
+ max8997_led_set_current(led, 0);
+ }
+
+ mutex_init(&led->mutex);
+
+ platform_set_drvdata(pdev, led);
+
+ ret = led_classdev_register(&pdev->dev, &led->cdev);
+ if (ret < 0)
+ goto err_led;
+
+ ret = device_create_file(led->cdev.dev, &dev_attr_mode);
+ if (ret != 0) {
+ dev_err(&pdev->dev,
+ "failed to create file: %d\n", ret);
+ goto err_file;
+ }
+
+ return 0;
+
+err_file:
+ led_classdev_unregister(&led->cdev);
+err_led:
+ kfree(led);
+err_mem:
+ return ret;
+}
+
+static int __devexit max8997_led_remove(struct platform_device *pdev)
+{
+ struct max8997_led *led = platform_get_drvdata(pdev);
+
+ device_remove_file(led->cdev.dev, &dev_attr_mode);
+ led_classdev_unregister(&led->cdev);
+ kfree(led);
+
+ return 0;
+}
+
+static struct platform_driver max8997_led_driver = {
+ .driver = {
+ .name = "max8997-led",
+ .owner = THIS_MODULE,
+ },
+ .probe = max8997_led_probe,
+ .remove = __devexit_p(max8997_led_remove),
+};
+
+static int __init max8997_led_init(void)
+{
+ return platform_driver_register(&max8997_led_driver);
+}
+module_init(max8997_led_init);
+
+static void __exit max8997_led_exit(void)
+{
+ platform_driver_unregister(&max8997_led_driver);
+}
+module_exit(max8997_led_exit);
+
+MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
+MODULE_DESCRIPTION("MAX8997 LED driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:max8997-led");
OpenPOWER on IntegriCloud