Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc driver specific updates from Olof Johansson:
 "These changes are specific to some driver that may be used by multiple
  boards or socs.  The most significant change in here is the move of
  the samsung iommu code from a platform specific in-kernel interface to
  the generic iommu subsystem."

Fix up trivial conflicts in arch/arm/mach-exynos/Kconfig

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
  mmc: dt: Consolidate DT bindings
  iommu/exynos: Add iommu driver for EXYNOS Platforms
  ARM: davinci: optimize the DMA ISR
  ARM: davinci: implement DEBUG_LL port choice
  ARM: tegra: Add SMMU enabler in AHB
  ARM: tegra: Add Tegra AHB driver
  Input: pxa27x_keypad add choice to set direct_key_mask
  Input: pxa27x_keypad direct key may be low active
  Input: pxa27x_keypad bug fix for direct_key_mask
  Input: pxa27x_keypad keep clock on as wakeup source
  ARM: dt: tegra: pinmux changes for USB ULPI
  ARM: tegra: add USB ULPI PHY reset GPIO to device tree
  ARM: tegra: don't hard-code USB ULPI PHY reset_gpio
  ARM: tegra: change pll_p_out4's rate to 24MHz
  ARM: tegra: fix pclk rate
  ARM: tegra: reparent sclk to pll_c_out1
  ARM: tegra: Add pllc clock init table
  ARM: dt: tegra cardhu: basic audio support
  ARM: dt: tegra30.dtsi: Add audio-related nodes
  ARM: tegra: add AUXDATA required for audio
  ...

1 files changed, 38 insertions, 14 deletions

diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index 29fe1b2be1c1..7f7b72464a37 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -311,7 +311,15 @@ static void pxa27x_keypad_scan_direct(struct pxa27x_keypad *keypad)
 	if (pdata->enable_rotary0 || pdata->enable_rotary1)
 		pxa27x_keypad_scan_rotary(keypad);
 
-	new_state = KPDK_DK(kpdk) & keypad->direct_key_mask;
+	/*
+	 * The KPDR_DK only output the key pin level, so it relates to board,
+	 * and low level may be active.
+	 */
+	if (pdata->direct_key_low_active)
+		new_state = ~KPDK_DK(kpdk) & keypad->direct_key_mask;
+	else
+		new_state = KPDK_DK(kpdk) & keypad->direct_key_mask;
+
 	bits_changed = keypad->direct_key_state ^ new_state;
 
 	if (bits_changed == 0)
@@ -383,7 +391,14 @@ static void pxa27x_keypad_config(struct pxa27x_keypad *keypad)
 	if (pdata->direct_key_num > direct_key_num)
 		direct_key_num = pdata->direct_key_num;
 
-	keypad->direct_key_mask = ((2 << direct_key_num) - 1) & ~mask;
+	/*
+	 * Direct keys usage may not start from KP_DKIN0, check the platfrom
+	 * mask data to config the specific.
+	 */
+	if (pdata->direct_key_mask)
+		keypad->direct_key_mask = pdata->direct_key_mask;
+	else
+		keypad->direct_key_mask = ((1 << direct_key_num) - 1) & ~mask;
 
 	/* enable direct key */
 	if (direct_key_num)
@@ -399,7 +414,7 @@ static int pxa27x_keypad_open(struct input_dev *dev)
 	struct pxa27x_keypad *keypad = input_get_drvdata(dev);
 
 	/* Enable unit clock */
-	clk_enable(keypad->clk);
+	clk_prepare_enable(keypad->clk);
 	pxa27x_keypad_config(keypad);
 
 	return 0;
@@ -410,7 +425,7 @@ static void pxa27x_keypad_close(struct input_dev *dev)
 	struct pxa27x_keypad *keypad = input_get_drvdata(dev);
 
 	/* Disable clock unit */
-	clk_disable(keypad->clk);
+	clk_disable_unprepare(keypad->clk);
 }
 
 #ifdef CONFIG_PM
@@ -419,10 +434,14 @@ static int pxa27x_keypad_suspend(struct device *dev)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct pxa27x_keypad *keypad = platform_get_drvdata(pdev);
 
-	clk_disable(keypad->clk);
-
+	/*
+	 * If the keypad is used a wake up source, clock can not be disabled.
+	 * Or it can not detect the key pressing.
+	 */
 	if (device_may_wakeup(&pdev->dev))
 		enable_irq_wake(keypad->irq);
+	else
+		clk_disable_unprepare(keypad->clk);
 
 	return 0;
 }
@@ -433,19 +452,24 @@ static int pxa27x_keypad_resume(struct device *dev)
 	struct pxa27x_keypad *keypad = platform_get_drvdata(pdev);
 	struct input_dev *input_dev = keypad->input_dev;
 
-	if (device_may_wakeup(&pdev->dev))
+	/*
+	 * If the keypad is used as wake up source, the clock is not turned
+	 * off. So do not need configure it again.
+	 */
+	if (device_may_wakeup(&pdev->dev)) {
 		disable_irq_wake(keypad->irq);
+	} else {
+		mutex_lock(&input_dev->mutex);
 
-	mutex_lock(&input_dev->mutex);
+		if (input_dev->users) {
+			/* Enable unit clock */
+			clk_prepare_enable(keypad->clk);
+			pxa27x_keypad_config(keypad);
+		}
 
-	if (input_dev->users) {
-		/* Enable unit clock */
-		clk_enable(keypad->clk);
-		pxa27x_keypad_config(keypad);
+		mutex_unlock(&input_dev->mutex);
 	}
 
-	mutex_unlock(&input_dev->mutex);
-
 	return 0;
 }