summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/mlx4/mlx4_ib.h
diff options
context:
space:
mode:
authorJack Morgenstein <jackm@dev.mellanox.co.il>2014-03-12 12:00:40 +0200
committerDavid S. Miller <davem@davemloft.net>2014-03-12 15:57:15 -0400
commit2f5bb473681b88819a9de28ac3a47e7737815a92 (patch)
tree74fe948339b3eca5dc0e03be4e9fd7b7b4372c38 /drivers/infiniband/hw/mlx4/mlx4_ib.h
parentb6ffaeffaea4d92f05f5ba1ef54df407cb7c8517 (diff)
downloadblackbird-op-linux-2f5bb473681b88819a9de28ac3a47e7737815a92.tar.gz
blackbird-op-linux-2f5bb473681b88819a9de28ac3a47e7737815a92.zip
mlx4: Add ref counting to port MAC table for RoCE
The IB side of RoCE requires the MAC table index of the MAC address used by its QPs. To obtain the real MAC index, the IB side registers the MAC (increasing its ref count, and also returning the real MAC index) during the modify-qp sequence. This protects against the ETH side deleting or modifying that MAC table entry while the QP is active. Note that until the modify-qp command returns success, the MAC and VLAN information only has "candidate" status. If the modify-qp succeeds, the "candidate" info is promoted to the operational MAC/VLAN info for the qp. If the modify fails, the candidate MAC/VLAN is unregistered, and the old qp info is preserved. The patch is a bit complex, because there are multiple qp transitions where the primary-path information may be modified: INIT-to-RTR, and SQD-to-SQD. Similarly for the alternate path information. Therefore the code must handle cases where path information has already been entered into the QP context by previous qp transitions. For the MAC address, the success logic is as follows: 1. If there was no previous MAC, simply move the candidate MAC information to the operational information, and reset the candidate MAC info. 2. If there was a previous MAC, unregister it. Then move the MAC information from candidate to operational, and reset the candidate info (as in 1. above). The MAC address failure logic is the same for all cases: - Unregister the candidate MAC, and reset the candidate MAC info. For Vlan registration, the logic is similar. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/infiniband/hw/mlx4/mlx4_ib.h')
-rw-r--r--drivers/infiniband/hw/mlx4/mlx4_ib.h19
1 files changed, 18 insertions, 1 deletions
diff --git a/drivers/infiniband/hw/mlx4/mlx4_ib.h b/drivers/infiniband/hw/mlx4/mlx4_ib.h
index a230683af940..febc8f9bc59a 100644
--- a/drivers/infiniband/hw/mlx4/mlx4_ib.h
+++ b/drivers/infiniband/hw/mlx4/mlx4_ib.h
@@ -241,6 +241,22 @@ struct mlx4_ib_proxy_sqp_hdr {
struct mlx4_rcv_tunnel_hdr tun;
} __packed;
+struct mlx4_roce_smac_vlan_info {
+ u64 smac;
+ int smac_index;
+ int smac_port;
+ u64 candidate_smac;
+ int candidate_smac_index;
+ int candidate_smac_port;
+ u16 vid;
+ int vlan_index;
+ int vlan_port;
+ u16 candidate_vid;
+ int candidate_vlan_index;
+ int candidate_vlan_port;
+ int update_vid;
+};
+
struct mlx4_ib_qp {
struct ib_qp ibqp;
struct mlx4_qp mqp;
@@ -273,8 +289,9 @@ struct mlx4_ib_qp {
struct list_head gid_list;
struct list_head steering_rules;
struct mlx4_ib_buf *sqp_proxy_rcv;
+ struct mlx4_roce_smac_vlan_info pri;
+ struct mlx4_roce_smac_vlan_info alt;
u64 reg_id;
-
};
struct mlx4_ib_srq {
OpenPOWER on IntegriCloud