summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/ipath/ipath_kernel.h
diff options
context:
space:
mode:
authorRalph Campbell <ralph.campbell@qlogic.com>2008-04-16 21:09:29 -0700
committerRoland Dreier <rolandd@cisco.com>2008-04-16 21:09:29 -0700
commit9355fb6a064723c71e80e9c78de3140b43bfb52d (patch)
treedd0fffeb6633aed6cb2c946a05bf33e05f2e9436 /drivers/infiniband/hw/ipath/ipath_kernel.h
parent2ba3f56eb402672ff83601b5990b219d39577636 (diff)
downloadblackbird-op-linux-9355fb6a064723c71e80e9c78de3140b43bfb52d.tar.gz
blackbird-op-linux-9355fb6a064723c71e80e9c78de3140b43bfb52d.zip
IB/ipath: Add support for 7220 receive queue changes
Newer HCAs have a HW option to write a sequence number to each receive queue entry and avoid a separate DMA of the tail register to memory. This patch adds support for these changes. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
Diffstat (limited to 'drivers/infiniband/hw/ipath/ipath_kernel.h')
-rw-r--r--drivers/infiniband/hw/ipath/ipath_kernel.h53
1 files changed, 37 insertions, 16 deletions
diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h
index 9867c3f80ec2..2447e85bf4f8 100644
--- a/drivers/infiniband/hw/ipath/ipath_kernel.h
+++ b/drivers/infiniband/hw/ipath/ipath_kernel.h
@@ -175,6 +175,8 @@ struct ipath_portdata {
u16 poll_type;
/* port rcvhdrq head offset */
u32 port_head;
+ /* receive packet sequence counter */
+ u32 port_seq_cnt;
};
struct sk_buff;
@@ -224,11 +226,6 @@ struct ipath_devdata {
unsigned long ipath_physaddr;
/* base of memory alloced for ipath_kregbase, for free */
u64 *ipath_kregalloc;
- /*
- * virtual address where port0 rcvhdrqtail updated for this unit.
- * only written to by the chip, not the driver.
- */
- volatile __le64 *ipath_hdrqtailptr;
/* ipath_cfgports pointers */
struct ipath_portdata **ipath_pd;
/* sk_buffs used by port 0 eager receive queue */
@@ -286,6 +283,7 @@ struct ipath_devdata {
/* per chip actions needed for IB Link up/down changes */
int (*ipath_f_ib_updown)(struct ipath_devdata *, int, u64);
+ unsigned ipath_lastegr_idx;
struct ipath_ibdev *verbs_dev;
struct timer_list verbs_timer;
/* total dwords sent (summed from counter) */
@@ -593,14 +591,6 @@ struct ipath_devdata {
u8 ipath_minrev;
/* board rev, from ipath_revision */
u8 ipath_boardrev;
-
- u8 ipath_r_portenable_shift;
- u8 ipath_r_intravail_shift;
- u8 ipath_r_tailupd_shift;
- u8 ipath_r_portcfg_shift;
-
- /* unit # of this chip, if present */
- int ipath_unit;
/* saved for restore after reset */
u8 ipath_pci_cacheline;
/* LID mask control */
@@ -616,6 +606,14 @@ struct ipath_devdata {
/* Rx Polarity inversion (compensate for ~tx on partner) */
u8 ipath_rx_pol_inv;
+ u8 ipath_r_portenable_shift;
+ u8 ipath_r_intravail_shift;
+ u8 ipath_r_tailupd_shift;
+ u8 ipath_r_portcfg_shift;
+
+ /* unit # of this chip, if present */
+ int ipath_unit;
+
/* local link integrity counter */
u32 ipath_lli_counter;
/* local link integrity errors */
@@ -645,8 +643,8 @@ struct ipath_devdata {
* Below should be computable from number of ports,
* since they are never modified.
*/
- u32 ipath_i_rcvavail_mask;
- u32 ipath_i_rcvurg_mask;
+ u64 ipath_i_rcvavail_mask;
+ u64 ipath_i_rcvurg_mask;
u16 ipath_i_rcvurg_shift;
u16 ipath_i_rcvavail_shift;
@@ -835,6 +833,8 @@ void ipath_hol_event(unsigned long);
#define IPATH_LINKUNK 0x400
/* Write combining flush needed for PIO */
#define IPATH_PIO_FLUSH_WC 0x1000
+ /* DMA Receive tail pointer */
+#define IPATH_NODMA_RTAIL 0x2000
/* no IB cable, or no device on IB cable */
#define IPATH_NOCABLE 0x4000
/* Supports port zero per packet receive interrupts via
@@ -845,9 +845,9 @@ void ipath_hol_event(unsigned long);
/* packet/word counters are 32 bit, else those 4 counters
* are 64bit */
#define IPATH_32BITCOUNTERS 0x20000
- /* can miss port0 rx interrupts */
/* Interrupt register is 64 bits */
#define IPATH_INTREG_64 0x40000
+ /* can miss port0 rx interrupts */
#define IPATH_DISABLED 0x80000 /* administratively disabled */
/* Use GPIO interrupts for new counters */
#define IPATH_GPIO_ERRINTRS 0x100000
@@ -1035,6 +1035,27 @@ static inline u32 ipath_get_rcvhdrtail(const struct ipath_portdata *pd)
pd->port_rcvhdrtail_kvaddr));
}
+static inline u32 ipath_get_hdrqtail(const struct ipath_portdata *pd)
+{
+ const struct ipath_devdata *dd = pd->port_dd;
+ u32 hdrqtail;
+
+ if (dd->ipath_flags & IPATH_NODMA_RTAIL) {
+ __le32 *rhf_addr;
+ u32 seq;
+
+ rhf_addr = (__le32 *) pd->port_rcvhdrq +
+ pd->port_head + dd->ipath_rhf_offset;
+ seq = ipath_hdrget_seq(rhf_addr);
+ hdrqtail = pd->port_head;
+ if (seq == pd->port_seq_cnt)
+ hdrqtail++;
+ } else
+ hdrqtail = ipath_get_rcvhdrtail(pd);
+
+ return hdrqtail;
+}
+
static inline u64 ipath_read_ireg(const struct ipath_devdata *dd, ipath_kreg r)
{
return (dd->ipath_flags & IPATH_INTREG_64) ?
OpenPOWER on IntegriCloud