Merge branch 'i2c/for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
 "Here is the 4.9 pull request from I2C including:

   - centralized error messages when registering to the core
   - improved lockdep annotations to prevent false positives
   - DT support for muxes, gates, and arbitrators
   - bus speeds can now be obtained from ACPI
   - i2c-octeon got refactored and now supports ThunderX SoCs, too
   - i2c-tegra and i2c-designware got a bigger bunch of updates
   - a couple of standard driver fixes and improvements"

* 'i2c/for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (71 commits)
  i2c: axxia: disable clks in case of failure in probe
  i2c: octeon: thunderx: Limit register access retries
  i2c: uniphier-f: fix misdetection of incomplete STOP condition
  gpio: pca953x: variable 'id' was used twice
  i2c: i801: Add support for Kaby Lake PCH-H
  gpio: pca953x: fix an incorrect lockdep warning
  i2c: add a warning to i2c_adapter_depth()
  lockdep: make MAX_LOCKDEP_SUBCLASSES unconditionally visible
  i2c: export i2c_adapter_depth()
  i2c: rk3x: Fix variable 'min_total_ns' unused warning
  i2c: rk3x: Fix sparse warning
  i2c / ACPI: Do not touch an I2C device if it belongs to another adapter
  i2c: octeon: Fix high-level controller status check
  i2c: octeon: Avoid sending STOP during recovery
  i2c: octeon: Fix set SCL recovery function
  i2c: rcar: add support for r8a7796 (R-Car M3-W)
  i2c: imx: make bus recovery through pinctrl optional
  i2c: meson: add gxbb compatible string
  i2c: uniphier-f: set the adapter to master mode when probing
  i2c: uniphier-f: avoid WARN_ON() of clk_disable() in failure path
  ...

1 files changed, 3 insertions, 6 deletions

diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 5c5b7cada8be..50702c7bb244 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -58,7 +58,7 @@ enum {
 #define REG_CON_LASTACK   BIT(5) /* 1: send NACK after last received byte */
 #define REG_CON_ACTACK    BIT(6) /* 1: stop if NACK is received */
 
-#define REG_CON_TUNING_MASK GENMASK(15, 8)
+#define REG_CON_TUNING_MASK GENMASK_ULL(15, 8)
 
 #define REG_CON_SDA_CFG(cfg) ((cfg) << 8)
 #define REG_CON_STA_CFG(cfg) ((cfg) << 12)
@@ -742,7 +742,7 @@ static int rk3x_i2c_v1_calc_timings(unsigned long clk_rate,
 				    struct i2c_timings *t,
 				    struct rk3x_i2c_calced_timings *t_calc)
 {
-	unsigned long min_low_ns, min_high_ns, min_total_ns;
+	unsigned long min_low_ns, min_high_ns;
 	unsigned long min_setup_start_ns, min_setup_data_ns;
 	unsigned long min_setup_stop_ns, max_hold_data_ns;
 
@@ -793,7 +793,6 @@ static int rk3x_i2c_v1_calc_timings(unsigned long clk_rate,
 
 	/* These are the min dividers needed for min hold times. */
 	min_div_for_hold = (min_low_div + min_high_div);
-	min_total_ns = min_low_ns + min_high_ns;
 
 	/*
 	 * This is the maximum divider so we don't go over the maximum.
@@ -1312,10 +1311,8 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
 	rk3x_i2c_adapt_div(i2c, clk_rate);
 
 	ret = i2c_add_adapter(&i2c->adap);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Could not register adapter\n");
+	if (ret < 0)
 		goto err_clk_notifier;
-	}
 
 	dev_info(&pdev->dev, "Initialized RK3xxx I2C bus at %p\n", i2c->regs);