summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm
diff options
context:
space:
mode:
authorAndy Lutomirski <luto@MIT.EDU>2010-06-12 05:21:18 -0400
committerEric Anholt <eric@anholt.net>2010-07-01 15:35:57 -0700
commit2d1c9752eaa4c0b38f6fb1ab79a6addc146cd64e (patch)
tree75d84be3c00a5be1a80fd90935c7c9294c8eaf3a /drivers/gpu/drm
parentfe27d53e5c597ee5ba5d72a29d517091f244e974 (diff)
downloadblackbird-op-linux-2d1c9752eaa4c0b38f6fb1ab79a6addc146cd64e.tar.gz
blackbird-op-linux-2d1c9752eaa4c0b38f6fb1ab79a6addc146cd64e.zip
drm/i915: Fix CRT hotplug regression in 2.6.35-rc1
Commit 7a772c492fcfffae812ffca78a628e76fa57fe58 has two bugs which made the hotplug problems on my laptop worse instead of better. First, it did not, in fact, disable the CRT plug interrupt -- it disabled all the other hotplug interrupts. It seems rather doubtful that that bit of the patch fixed anything, so let's just remove it. (If you want to add it back, you probably meant ~CRT_HOTPLUG_INT_EN.) Second, on at least my GM45, setting CRT_HOTPLUG_ACTIVATION_PERIOD_64 and CRT_HOTPLUG_VOLTAGE_COMPARE_50 (when they were previously unset) causes a hotplug interrupt about three seconds later. The old code never restored PORT_HOTPLUG_EN so this could only happen once, but they new code restores those registers. So just set those bits when we set up the interrupt in the first place. Signed-off-by: Andy Lutomirski <luto@mit.edu> Signed-off-by: Eric Anholt <eric@anholt.net>
Diffstat (limited to 'drivers/gpu/drm')
-rw-r--r--drivers/gpu/drm/i915/i915_irq.c12
-rw-r--r--drivers/gpu/drm/i915/i915_reg.h1
-rw-r--r--drivers/gpu/drm/i915/intel_crt.c6
3 files changed, 11 insertions, 8 deletions
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 70e1e4b66744..d676e55eb212 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -1434,8 +1434,18 @@ int i915_driver_irq_postinstall(struct drm_device *dev)
hotplug_en |= SDVOC_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS)
hotplug_en |= SDVOB_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS)
+ if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
hotplug_en |= CRT_HOTPLUG_INT_EN;
+
+ /* Programming the CRT detection parameters tends
+ to generate a spurious hotplug event about three
+ seconds later. So just do it once.
+ */
+ if (IS_G4X(dev))
+ hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
+ hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
+ }
+
/* Ignore TV since it's buggy */
I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 2cae38a57247..150400f40534 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1134,7 +1134,6 @@
#define CRT_HOTPLUG_DETECT_DELAY_2G (1 << 4)
#define CRT_HOTPLUG_DETECT_VOLTAGE_325MV (0 << 2)
#define CRT_HOTPLUG_DETECT_VOLTAGE_475MV (1 << 2)
-#define CRT_HOTPLUG_MASK (0x3fc) /* Bits 9-2 */
#define PORT_HOTPLUG_STAT 0x61114
#define HDMIB_HOTPLUG_INT_STATUS (1 << 29)
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 22ff38455731..ee0732b222a1 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -234,14 +234,8 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector)
else
tries = 1;
hotplug_en = orig = I915_READ(PORT_HOTPLUG_EN);
- hotplug_en &= CRT_HOTPLUG_MASK;
hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;
- if (IS_G4X(dev))
- hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
-
- hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
-
for (i = 0; i < tries ; i++) {
unsigned long timeout;
/* turn on the FORCE_DETECT */
OpenPOWER on IntegriCloud