drm: Add GEM ("graphics execution manager") to i915 driver.

GEM allows the creation of persistent buffer objects accessible by the
graphics device through new ioctls for managing execution of commands on the
device.  The userland API is almost entirely driver-specific to ensure that
any driver building on this model can easily map the interface to individual
driver requirements.

GEM is used by the 2d driver for managing its internal state allocations and
will be used for pixmap storage to reduce memory consumption and enable
zero-copy GLX_EXT_texture_from_pixmap, and in the 3d driver is used to enable
GL_EXT_framebuffer_object and GL_ARB_pixel_buffer_object.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>

1 files changed, 2497 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
new file mode 100644
index 000000000000..90ae8a0369f7
--- /dev/null
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -0,0 +1,2497 @@
+/*
+ * Copyright © 2008 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Eric Anholt <eric@anholt.net>
+ *
+ */
+
+#include "drmP.h"
+#include "drm.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+#include <linux/swap.h>
+
+static int
+i915_gem_object_set_domain(struct drm_gem_object *obj,
+			    uint32_t read_domains,
+			    uint32_t write_domain);
+static int
+i915_gem_object_set_domain_range(struct drm_gem_object *obj,
+				 uint64_t offset,
+				 uint64_t size,
+				 uint32_t read_domains,
+				 uint32_t write_domain);
+static int
+i915_gem_set_domain(struct drm_gem_object *obj,
+		    struct drm_file *file_priv,
+		    uint32_t read_domains,
+		    uint32_t write_domain);
+static int i915_gem_object_get_page_list(struct drm_gem_object *obj);
+static void i915_gem_object_free_page_list(struct drm_gem_object *obj);
+static int i915_gem_object_wait_rendering(struct drm_gem_object *obj);
+
+int
+i915_gem_init_ioctl(struct drm_device *dev, void *data,
+		    struct drm_file *file_priv)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_gem_init *args = data;
+
+	mutex_lock(&dev->struct_mutex);
+
+	if (args->gtt_start >= args->gtt_end ||
+	    (args->gtt_start & (PAGE_SIZE - 1)) != 0 ||
+	    (args->gtt_end & (PAGE_SIZE - 1)) != 0) {
+		mutex_unlock(&dev->struct_mutex);
+		return -EINVAL;
+	}
+
+	drm_mm_init(&dev_priv->mm.gtt_space, args->gtt_start,
+	    args->gtt_end - args->gtt_start);
+
+	dev->gtt_total = (uint32_t) (args->gtt_end - args->gtt_start);
+
+	mutex_unlock(&dev->struct_mutex);
+
+	return 0;
+}
+
+
+/**
+ * Creates a new mm object and returns a handle to it.
+ */
+int
+i915_gem_create_ioctl(struct drm_device *dev, void *data,
+		      struct drm_file *file_priv)
+{
+	struct drm_i915_gem_create *args = data;
+	struct drm_gem_object *obj;
+	int handle, ret;
+
+	args->size = roundup(args->size, PAGE_SIZE);
+
+	/* Allocate the new object */
+	obj = drm_gem_object_alloc(dev, args->size);
+	if (obj == NULL)
+		return -ENOMEM;
+
+	ret = drm_gem_handle_create(file_priv, obj, &handle);
+	mutex_lock(&dev->struct_mutex);
+	drm_gem_object_handle_unreference(obj);
+	mutex_unlock(&dev->struct_mutex);
+
+	if (ret)
+		return ret;
+
+	args->handle = handle;
+
+	return 0;
+}
+
+/**
+ * Reads data from the object referenced by handle.
+ *
+ * On error, the contents of *data are undefined.
+ */
+int
+i915_gem_pread_ioctl(struct drm_device *dev, void *data,
+		     struct drm_file *file_priv)
+{
+	struct drm_i915_gem_pread *args = data;
+	struct drm_gem_object *obj;
+	struct drm_i915_gem_object *obj_priv;
+	ssize_t read;
+	loff_t offset;
+	int ret;
+
+	obj = drm_gem_object_lookup(dev, file_priv, args->handle);
+	if (obj == NULL)
+		return -EBADF;
+	obj_priv = obj->driver_private;
+
+	/* Bounds check source.
+	 *
+	 * XXX: This could use review for overflow issues...
+	 */
+	if (args->offset > obj->size || args->size > obj->size ||
+	    args->offset + args->size > obj->size) {
+		drm_gem_object_unreference(obj);
+		return -EINVAL;
+	}
+
+	mutex_lock(&dev->struct_mutex);
+
+	ret = i915_gem_object_set_domain_range(obj, args->offset, args->size,
+					       I915_GEM_DOMAIN_CPU, 0);
+	if (ret != 0) {
+		drm_gem_object_unreference(obj);
+		mutex_unlock(&dev->struct_mutex);
+	}
+
+	offset = args->offset;
+
+	read = vfs_read(obj->filp, (char __user *)(uintptr_t)args->data_ptr,
+			args->size, &offset);
+	if (read != args->size) {
+		drm_gem_object_unreference(obj);
+		mutex_unlock(&dev->struct_mutex);
+		if (read < 0)
+			return read;
+		else
+			return -EINVAL;
+	}
+
+	drm_gem_object_unreference(obj);
+	mutex_unlock(&dev->struct_mutex);
+
+	return 0;
+}
+
+static int
+i915_gem_gtt_pwrite(struct drm_device *dev, struct drm_gem_object *obj,
+		    struct drm_i915_gem_pwrite *args,
+		    struct drm_file *file_priv)
+{
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
+	ssize_t remain;
+	loff_t offset;
+	char __user *user_data;
+	char *vaddr;
+	int i, o, l;
+	int ret = 0;
+	unsigned long pfn;
+	unsigned long unwritten;
+
+	user_data = (char __user *) (uintptr_t) args->data_ptr;
+	remain = args->size;
+	if (!access_ok(VERIFY_READ, user_data, remain))
+		return -EFAULT;
+
+
+	mutex_lock(&dev->struct_mutex);
+	ret = i915_gem_object_pin(obj, 0);
+	if (ret) {
+		mutex_unlock(&dev->struct_mutex);
+		return ret;
+	}
+	ret = i915_gem_set_domain(obj, file_priv,
+				  I915_GEM_DOMAIN_GTT, I915_GEM_DOMAIN_GTT);
+	if (ret)
+		goto fail;
+
+	obj_priv = obj->driver_private;
+	offset = obj_priv->gtt_offset + args->offset;
+	obj_priv->dirty = 1;
+
+	while (remain > 0) {
+		/* Operation in this page
+		 *
+		 * i = page number
+		 * o = offset within page
+		 * l = bytes to copy
+		 */
+		i = offset >> PAGE_SHIFT;
+		o = offset & (PAGE_SIZE-1);
+		l = remain;
+		if ((o + l) > PAGE_SIZE)
+			l = PAGE_SIZE - o;
+
+		pfn = (dev->agp->base >> PAGE_SHIFT) + i;
+
+#ifdef CONFIG_HIGHMEM
+		/* kmap_atomic can't map IO pages on non-HIGHMEM kernels
+		 */
+		vaddr = kmap_atomic_pfn(pfn, KM_USER0);
+#if WATCH_PWRITE
+		DRM_INFO("pwrite i %d o %d l %d pfn %ld vaddr %p\n",
+			 i, o, l, pfn, vaddr);
+#endif
+		unwritten = __copy_from_user_inatomic_nocache(vaddr + o,
+							      user_data, l);
+		kunmap_atomic(vaddr, KM_USER0);
+
+		if (unwritten)
+#endif /* CONFIG_HIGHMEM */
+		{
+			vaddr = ioremap(pfn << PAGE_SHIFT, PAGE_SIZE);
+#if WATCH_PWRITE
+			DRM_INFO("pwrite slow i %d o %d l %d "
+				 "pfn %ld vaddr %p\n",
+				 i, o, l, pfn, vaddr);
+#endif
+			if (vaddr == NULL) {
+				ret = -EFAULT;
+				goto fail;
+			}
+			unwritten = __copy_from_user(vaddr + o, user_data, l);
+#if WATCH_PWRITE
+			DRM_INFO("unwritten %ld\n", unwritten);
+#endif
+			iounmap(vaddr);
+			if (unwritten) {
+				ret = -EFAULT;
+				goto fail;
+			}
+		}
+
+		remain -= l;
+		user_data += l;
+		offset += l;
+	}
+#if WATCH_PWRITE && 1
+	i915_gem_clflush_object(obj);
+	i915_gem_dump_object(obj, args->offset + args->size, __func__, ~0);
+	i915_gem_clflush_object(obj);
+#endif
+
+fail:
+	i915_gem_object_unpin(obj);
+	mutex_unlock(&dev->struct_mutex);
+
+	return ret;
+}
+
+int
+i915_gem_shmem_pwrite(struct drm_device *dev, struct drm_gem_object *obj,
+		      struct drm_i915_gem_pwrite *args,
+		      struct drm_file *file_priv)
+{
+	int ret;
+	loff_t offset;
+	ssize_t written;
+
+	mutex_lock(&dev->struct_mutex);
+
+	ret = i915_gem_set_domain(obj, file_priv,
+				  I915_GEM_DOMAIN_CPU, I915_GEM_DOMAIN_CPU);
+	if (ret) {
+		mutex_unlock(&dev->struct_mutex);
+		return ret;
+	}
+
+	offset = args->offset;
+
+	written = vfs_write(obj->filp,
+			    (char __user *)(uintptr_t) args->data_ptr,
+			    args->size, &offset);
+	if (written != args->size) {
+		mutex_unlock(&dev->struct_mutex);
+		if (written < 0)
+			return written;
+		else
+			return -EINVAL;
+	}
+
+	mutex_unlock(&dev->struct_mutex);
+
+	return 0;
+}
+
+/**
+ * Writes data to the object referenced by handle.
+ *
+ * On error, the contents of the buffer that were to be modified are undefined.
+ */
+int
+i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
+		      struct drm_file *file_priv)
+{
+	struct drm_i915_gem_pwrite *args = data;
+	struct drm_gem_object *obj;
+	struct drm_i915_gem_object *obj_priv;
+	int ret = 0;
+
+	obj = drm_gem_object_lookup(dev, file_priv, args->handle);
+	if (obj == NULL)
+		return -EBADF;
+	obj_priv = obj->driver_private;
+
+	/* Bounds check destination.
+	 *
+	 * XXX: This could use review for overflow issues...
+	 */
+	if (args->offset > obj->size || args->size > obj->size ||
+	    args->offset + args->size > obj->size) {
+		drm_gem_object_unreference(obj);
+		return -EINVAL;
+	}
+
+	/* We can only do the GTT pwrite on untiled buffers, as otherwise
+	 * it would end up going through the fenced access, and we'll get
+	 * different detiling behavior between reading and writing.
+	 * pread/pwrite currently are reading and writing from the CPU
+	 * perspective, requiring manual detiling by the client.
+	 */
+	if (obj_priv->tiling_mode == I915_TILING_NONE &&
+	    dev->gtt_total != 0)
+		ret = i915_gem_gtt_pwrite(dev, obj, args, file_priv);
+	else
+		ret = i915_gem_shmem_pwrite(dev, obj, args, file_priv);
+
+#if WATCH_PWRITE
+	if (ret)
+		DRM_INFO("pwrite failed %d\n", ret);
+#endif
+
+	drm_gem_object_unreference(obj);
+
+	return ret;
+}
+
+/**
+ * Called when user space prepares to use an object
+ */
+int
+i915_gem_set_domain_ioctl(struct drm_device *dev, void *data,
+			  struct drm_file *file_priv)
+{
+	struct drm_i915_gem_set_domain *args = data;
+	struct drm_gem_object *obj;
+	int ret;
+
+	if (!(dev->driver->driver_features & DRIVER_GEM))
+		return -ENODEV;
+
+	obj = drm_gem_object_lookup(dev, file_priv, args->handle);
+	if (obj == NULL)
+		return -EBADF;
+
+	mutex_lock(&dev->struct_mutex);
+#if WATCH_BUF
+	DRM_INFO("set_domain_ioctl %p(%d), %08x %08x\n",
+		 obj, obj->size, args->read_domains, args->write_domain);
+#endif
+	ret = i915_gem_set_domain(obj, file_priv,
+				  args->read_domains, args->write_domain);
+	drm_gem_object_unreference(obj);
+	mutex_unlock(&dev->struct_mutex);
+	return ret;
+}
+
+/**
+ * Called when user space has done writes to this buffer
+ */
+int
+i915_gem_sw_finish_ioctl(struct drm_device *dev, void *data,
+		      struct drm_file *file_priv)
+{
+	struct drm_i915_gem_sw_finish *args = data;
+	struct drm_gem_object *obj;
+	struct drm_i915_gem_object *obj_priv;
+	int ret = 0;
+
+	if (!(dev->driver->driver_features & DRIVER_GEM))
+		return -ENODEV;
+
+	mutex_lock(&dev->struct_mutex);
+	obj = drm_gem_object_lookup(dev, file_priv, args->handle);
+	if (obj == NULL) {
+		mutex_unlock(&dev->struct_mutex);
+		return -EBADF;
+	}
+
+#if WATCH_BUF
+	DRM_INFO("%s: sw_finish %d (%p %d)\n",
+		 __func__, args->handle, obj, obj->size);
+#endif
+	obj_priv = obj->driver_private;
+
+	/* Pinned buffers may be scanout, so flush the cache */
+	if ((obj->write_domain & I915_GEM_DOMAIN_CPU) && obj_priv->pin_count) {
+		i915_gem_clflush_object(obj);
+		drm_agp_chipset_flush(dev);
+	}
+	drm_gem_object_unreference(obj);
+	mutex_unlock(&dev->struct_mutex);
+	return ret;
+}
+
+/**
+ * Maps the contents of an object, returning the address it is mapped
+ * into.
+ *
+ * While the mapping holds a reference on the contents of the object, it doesn't
+ * imply a ref on the object itself.
+ */
+int
+i915_gem_mmap_ioctl(struct drm_device *dev, void *data,
+		   struct drm_file *file_priv)
+{
+	struct drm_i915_gem_mmap *args = data;
+	struct drm_gem_object *obj;
+	loff_t offset;
+	unsigned long addr;
+
+	if (!(dev->driver->driver_features & DRIVER_GEM))
+		return -ENODEV;
+
+	obj = drm_gem_object_lookup(dev, file_priv, args->handle);
+	if (obj == NULL)
+		return -EBADF;
+
+	offset = args->offset;
+
+	down_write(&current->mm->mmap_sem);
+	addr = do_mmap(obj->filp, 0, args->size,
+		       PROT_READ | PROT_WRITE, MAP_SHARED,
+		       args->offset);
+	up_write(&current->mm->mmap_sem);
+	mutex_lock(&dev->struct_mutex);
+	drm_gem_object_unreference(obj);
+	mutex_unlock(&dev->struct_mutex);
+	if (IS_ERR((void *)addr))
+		return addr;
+
+	args->addr_ptr = (uint64_t) addr;
+
+	return 0;
+}
+
+static void
+i915_gem_object_free_page_list(struct drm_gem_object *obj)
+{
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
+	int page_count = obj->size / PAGE_SIZE;
+	int i;
+
+	if (obj_priv->page_list == NULL)
+		return;
+
+
+	for (i = 0; i < page_count; i++)
+		if (obj_priv->page_list[i] != NULL) {
+			if (obj_priv->dirty)
+				set_page_dirty(obj_priv->page_list[i]);
+			mark_page_accessed(obj_priv->page_list[i]);
+			page_cache_release(obj_priv->page_list[i]);
+		}
+	obj_priv->dirty = 0;
+
+	drm_free(obj_priv->page_list,
+		 page_count * sizeof(struct page *),
+		 DRM_MEM_DRIVER);
+	obj_priv->page_list = NULL;
+}
+
+static void
+i915_gem_object_move_to_active(struct drm_gem_object *obj)
+{
+	struct drm_device *dev = obj->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
+
+	/* Add a reference if we're newly entering the active list. */
+	if (!obj_priv->active) {
+		drm_gem_object_reference(obj);
+		obj_priv->active = 1;
+	}
+	/* Move from whatever list we were on to the tail of execution. */
+	list_move_tail(&obj_priv->list,
+		       &dev_priv->mm.active_list);
+}
+
+
+static void
+i915_gem_object_move_to_inactive(struct drm_gem_object *obj)
+{
+	struct drm_device *dev = obj->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
+
+	i915_verify_inactive(dev, __FILE__, __LINE__);
+	if (obj_priv->pin_count != 0)
+		list_del_init(&obj_priv->list);
+	else
+		list_move_tail(&obj_priv->list, &dev_priv->mm.inactive_list);
+
+	if (obj_priv->active) {
+		obj_priv->active = 0;
+		drm_gem_object_unreference(obj);
+	}
+	i915_verify_inactive(dev, __FILE__, __LINE__);
+}
+
+/**
+ * Creates a new sequence number, emitting a write of it to the status page
+ * plus an interrupt, which will trigger i915_user_interrupt_handler.
+ *
+ * Must be called with struct_lock held.
+ *
+ * Returned sequence numbers are nonzero on success.
+ */
+static uint32_t
+i915_add_request(struct drm_device *dev, uint32_t flush_domains)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_gem_request *request;
+	uint32_t seqno;
+	int was_empty;
+	RING_LOCALS;
+
+	request = drm_calloc(1, sizeof(*request), DRM_MEM_DRIVER);
+	if (request == NULL)
+		return 0;
+
+	/* Grab the seqno we're going to make this request be, and bump the
+	 * next (skipping 0 so it can be the reserved no-seqno value).
+	 */
+	seqno = dev_priv->mm.next_gem_seqno;
+	dev_priv->mm.next_gem_seqno++;
+	if (dev_priv->mm.next_gem_seqno == 0)
+		dev_priv->mm.next_gem_seqno++;
+
+	BEGIN_LP_RING(4);
+	OUT_RING(MI_STORE_DWORD_INDEX);
+	OUT_RING(I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
+	OUT_RING(seqno);
+
+	OUT_RING(MI_USER_INTERRUPT);
+	ADVANCE_LP_RING();
+
+	DRM_DEBUG("%d\n", seqno);
+
+	request->seqno = seqno;
+	request->emitted_jiffies = jiffies;
+	request->flush_domains = flush_domains;
+	was_empty = list_empty(&dev_priv->mm.request_list);
+	list_add_tail(&request->list, &dev_priv->mm.request_list);
+
+	if (was_empty)
+		schedule_delayed_work(&dev_priv->mm.retire_work, HZ);
+	return seqno;
+}
+
+/**
+ * Command execution barrier
+ *
+ * Ensures that all commands in the ring are finished
+ * before signalling the CPU
+ */
+uint32_t
+i915_retire_commands(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	uint32_t cmd = MI_FLUSH | MI_NO_WRITE_FLUSH;
+	uint32_t flush_domains = 0;
+	RING_LOCALS;
+
+	/* The sampler always gets flushed on i965 (sigh) */
+	if (IS_I965G(dev))
+		flush_domains |= I915_GEM_DOMAIN_SAMPLER;
+	BEGIN_LP_RING(2);
+	OUT_RING(cmd);
+	OUT_RING(0); /* noop */
+	ADVANCE_LP_RING();
+	return flush_domains;
+}
+
+/**
+ * Moves buffers associated only with the given active seqno from the active
+ * to inactive list, potentially freeing them.
+ */
+static void
+i915_gem_retire_request(struct drm_device *dev,
+			struct drm_i915_gem_request *request)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+
+	/* Move any buffers on the active list that are no longer referenced
+	 * by the ringbuffer to the flushing/inactive lists as appropriate.
+	 */
+	while (!list_empty(&dev_priv->mm.active_list)) {
+		struct drm_gem_object *obj;
+		struct drm_i915_gem_object *obj_priv;
+
+		obj_priv = list_first_entry(&dev_priv->mm.active_list,
+					    struct drm_i915_gem_object,
+					    list);
+		obj = obj_priv->obj;
+
+		/* If the seqno being retired doesn't match the oldest in the
+		 * list, then the oldest in the list must still be newer than
+		 * this seqno.
+		 */
+		if (obj_priv->last_rendering_seqno != request->seqno)
+			return;
+#if WATCH_LRU
+		DRM_INFO("%s: retire %d moves to inactive list %p\n",
+			 __func__, request->seqno, obj);
+#endif
+
+		if (obj->write_domain != 0) {
+			list_move_tail(&obj_priv->list,
+				       &dev_priv->mm.flushing_list);
+		} else {
+			i915_gem_object_move_to_inactive(obj);
+		}
+	}
+
+	if (request->flush_domains != 0) {
+		struct drm_i915_gem_object *obj_priv, *next;
+
+		/* Clear the write domain and activity from any buffers
+		 * that are just waiting for a flush matching the one retired.
+		 */
+		list_for_each_entry_safe(obj_priv, next,
+					 &dev_priv->mm.flushing_list, list) {
+			struct drm_gem_object *obj = obj_priv->obj;
+
+			if (obj->write_domain & request->flush_domains) {
+				obj->write_domain = 0;
+				i915_gem_object_move_to_inactive(obj);
+			}
+		}
+
+	}
+}
+
+/**
+ * Returns true if seq1 is later than seq2.
+ */
+static int
+i915_seqno_passed(uint32_t seq1, uint32_t seq2)
+{
+	return (int32_t)(seq1 - seq2) >= 0;
+}
+
+uint32_t
+i915_get_gem_seqno(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+
+	return READ_HWSP(dev_priv, I915_GEM_HWS_INDEX);
+}
+
+/**
+ * This function clears the request list as sequence numbers are passed.
+ */
+void
+i915_gem_retire_requests(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	uint32_t seqno;
+
+	seqno = i915_get_gem_seqno(dev);
+
+	while (!list_empty(&dev_priv->mm.request_list)) {
+		struct drm_i915_gem_request *request;
+		uint32_t retiring_seqno;
+
+		request = list_first_entry(&dev_priv->mm.request_list,
+					   struct drm_i915_gem_request,
+					   list);
+		retiring_seqno = request->seqno;
+
+		if (i915_seqno_passed(seqno, retiring_seqno) ||
+		    dev_priv->mm.wedged) {
+			i915_gem_retire_request(dev, request);
+
+			list_del(&request->list);
+			drm_free(request, sizeof(*request), DRM_MEM_DRIVER);
+		} else
+			break;
+	}
+}
+
+void
+i915_gem_retire_work_handler(struct work_struct *work)
+{
+	drm_i915_private_t *dev_priv;
+	struct drm_device *dev;
+
+	dev_priv = container_of(work, drm_i915_private_t,
+				mm.retire_work.work);
+	dev = dev_priv->dev;
+
+	mutex_lock(&dev->struct_mutex);
+	i915_gem_retire_requests(dev);
+	if (!list_empty(&dev_priv->mm.request_list))
+		schedule_delayed_work(&dev_priv->mm.retire_work, HZ);
+	mutex_unlock(&dev->struct_mutex);
+}
+
+/**
+ * Waits for a sequence number to be signaled, and cleans up the
+ * request and object lists appropriately for that event.
+ */
+int
+i915_wait_request(struct drm_device *dev, uint32_t seqno)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int ret = 0;
+
+	BUG_ON(seqno == 0);
+
+	if (!i915_seqno_passed(i915_get_gem_seqno(dev), seqno)) {
+		dev_priv->mm.waiting_gem_seqno = seqno;
+		i915_user_irq_get(dev);
+		ret = wait_event_interruptible(dev_priv->irq_queue,
+					       i915_seqno_passed(i915_get_gem_seqno(dev),
+								 seqno) ||
+					       dev_priv->mm.wedged);
+		i915_user_irq_put(dev);
+		dev_priv->mm.waiting_gem_seqno = 0;
+	}
+	if (dev_priv->mm.wedged)
+		ret = -EIO;
+
+	if (ret && ret != -ERESTARTSYS)
+		DRM_ERROR("%s returns %d (awaiting %d at %d)\n",
+			  __func__, ret, seqno, i915_get_gem_seqno(dev));
+
+	/* Directly dispatch request retiring.  While we have the work queue
+	 * to handle this, the waiter on a request often wants an associated
+	 * buffer to have made it to the inactive list, and we would need
+	 * a separate wait queue to handle that.
+	 */
+	if (ret == 0)
+		i915_gem_retire_requests(dev);
+
+	return ret;
+}
+
+static void
+i915_gem_flush(struct drm_device *dev,
+	       uint32_t invalidate_domains,
+	       uint32_t flush_domains)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	uint32_t cmd;
+	RING_LOCALS;
+
+#if WATCH_EXEC
+	DRM_INFO("%s: invalidate %08x flush %08x\n", __func__,
+		  invalidate_domains, flush_domains);
+#endif
+
+	if (flush_domains & I915_GEM_DOMAIN_CPU)
+		drm_agp_chipset_flush(dev);
+
+	if ((invalidate_domains | flush_domains) & ~(I915_GEM_DOMAIN_CPU |
+						     I915_GEM_DOMAIN_GTT)) {
+		/*
+		 * read/write caches:
+		 *
+		 * I915_GEM_DOMAIN_RENDER is always invalidated, but is
+		 * only flushed if MI_NO_WRITE_FLUSH is unset.  On 965, it is
+		 * also flushed at 2d versus 3d pipeline switches.
+		 *
+		 * read-only caches:
+		 *
+		 * I915_GEM_DOMAIN_SAMPLER is flushed on pre-965 if
+		 * MI_READ_FLUSH is set, and is always flushed on 965.
+		 *
+		 * I915_GEM_DOMAIN_COMMAND may not exist?
+		 *
+		 * I915_GEM_DOMAIN_INSTRUCTION, which exists on 965, is
+		 * invalidated when MI_EXE_FLUSH is set.
+		 *
+		 * I915_GEM_DOMAIN_VERTEX, which exists on 965, is
+		 * invalidated with every MI_FLUSH.
+		 *
+		 * TLBs:
+		 *
+		 * On 965, TLBs associated with I915_GEM_DOMAIN_COMMAND
+		 * and I915_GEM_DOMAIN_CPU in are invalidated at PTE write and
+		 * I915_GEM_DOMAIN_RENDER and I915_GEM_DOMAIN_SAMPLER
+		 * are flushed at any MI_FLUSH.
+		 */
+
+		cmd = MI_FLUSH | MI_NO_WRITE_FLUSH;
+		if ((invalidate_domains|flush_domains) &
+		    I915_GEM_DOMAIN_RENDER)
+			cmd &= ~MI_NO_WRITE_FLUSH;
+		if (!IS_I965G(dev)) {
+			/*
+			 * On the 965, the sampler cache always gets flushed
+			 * and this bit is reserved.
+			 */
+			if (invalidate_domains & I915_GEM_DOMAIN_SAMPLER)
+				cmd |= MI_READ_FLUSH;
+		}
+		if (invalidate_domains & I915_GEM_DOMAIN_INSTRUCTION)
+			cmd |= MI_EXE_FLUSH;
+
+#if WATCH_EXEC
+		DRM_INFO("%s: queue flush %08x to ring\n", __func__, cmd);
+#endif
+		BEGIN_LP_RING(2);
+		OUT_RING(cmd);
+		OUT_RING(0); /* noop */
+		ADVANCE_LP_RING();
+	}
+}
+
+/**
+ * Ensures that all rendering to the object has completed and the object is
+ * safe to unbind from the GTT or access from the CPU.
+ */
+static int
+i915_gem_object_wait_rendering(struct drm_gem_object *obj)
+{
+	struct drm_device *dev = obj->dev;
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
+	int ret;
+
+	/* If there are writes queued to the buffer, flush and
+	 * create a new seqno to wait for.
+	 */
+	if (obj->write_domain & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)) {
+		uint32_t write_domain = obj->write_domain;
+#if WATCH_BUF
+		DRM_INFO("%s: flushing object %p from write domain %08x\n",
+			  __func__, obj, write_domain);
+#endif
+		i915_gem_flush(dev, 0, write_domain);
+
+		i915_gem_object_move_to_active(obj);
+		obj_priv->last_rendering_seqno = i915_add_request(dev,
+								  write_domain);
+		BUG_ON(obj_priv->last_rendering_seqno == 0);
+#if WATCH_LRU
+		DRM_INFO("%s: flush moves to exec list %p\n", __func__, obj);
+#endif
+	}
+
+	/* If there is rendering queued on the buffer being evicted, wait for
+	 * it.
+	 */
+	if (obj_priv->active) {
+#if WATCH_BUF
+		DRM_INFO("%s: object %p wait for seqno %08x\n",
+			  __func__, obj, obj_priv->last_rendering_seqno);
+#endif
+		ret = i915_wait_request(dev, obj_priv->last_rendering_seqno);
+		if (ret != 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * Unbinds an object from the GTT aperture.
+ */
+static int
+i915_gem_object_unbind(struct drm_gem_object *obj)
+{
+	struct drm_device *dev = obj->dev;
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
+	int ret = 0;
+
+#if WATCH_BUF
+	DRM_INFO("%s:%d %p\n", __func__, __LINE__, obj);
+	DRM_INFO("gtt_space %p\n", obj_priv->gtt_space);
+#endif
+	if (obj_priv->gtt_space == NULL)
+		return 0;
+
+	if (obj_priv->pin_count != 0) {
+		DRM_ERROR("Attempting to unbind pinned buffer\n");
+		return -EINVAL;
+	}
+
+	/* Wait for any rendering to complete
+	 */
+	ret = i915_gem_object_wait_rendering(obj);
+	if (ret) {
+		DRM_ERROR("wait_rendering failed: %d\n", ret);
+		return ret;
+	}
+
+	/* Move the object to the CPU domain to ensure that
+	 * any possible CPU writes while it's not in the GTT
+	 * are flushed when we go to remap it. This will
+	 * also ensure that all pending GPU writes are finished
+	 * before we unbind.
+	 */
+	ret = i915_gem_object_set_domain(obj, I915_GEM_DOMAIN_CPU,
+					 I915_GEM_DOMAIN_CPU);
+	if (ret) {
+		DRM_ERROR("set_domain failed: %d\n", ret);
+		return ret;
+	}
+
+	if (obj_priv->agp_mem != NULL) {
+		drm_unbind_agp(obj_priv->agp_mem);
+		drm_free_agp(obj_priv->agp_mem, obj->size / PAGE_SIZE);
+		obj_priv->agp_mem = NULL;
+	}
+
+	BUG_ON(obj_priv->active);
+
+	i915_gem_object_free_page_list(obj);
+
+	if (obj_priv->gtt_space) {
+		atomic_dec(&dev->gtt_count);
+		atomic_sub(obj->size, &dev->gtt_memory);
+
+		drm_mm_put_block(obj_priv->gtt_space);
+		obj_priv->gtt_space = NULL;
+	}
+
+	/* Remove ourselves from the LRU list if present. */
+	if (!list_empty(&obj_priv->list))
+		list_del_init(&obj_priv->list);
+
+	return 0;
+}
+
+static int
+i915_gem_evict_something(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_gem_object *obj;
+	struct drm_i915_gem_object *obj_priv;
+	int ret = 0;
+
+	for (;;) {
+		/* If there's an inactive buffer available now, grab it
+		 * and be done.
+		 */
+		if (!list_empty(&dev_priv->mm.inactive_list)) {
+			obj_priv = list_first_entry(&dev_priv->mm.inactive_list,
+						    struct drm_i915_gem_object,
+						    list);
+			obj = obj_priv->obj;
+			BUG_ON(obj_priv->pin_count != 0);
+#if WATCH_LRU
+			DRM_INFO("%s: evicting %p\n", __func__, obj);
+#endif
+			BUG_ON(obj_priv->active);
+
+			/* Wait on the rendering and unbind the buffer. */
+			ret = i915_gem_object_unbind(obj);
+			break;
+		}
+
+		/* If we didn't get anything, but the ring is still processing
+		 * things, wait for one of those things to finish and hopefully
+		 * leave us a buffer to evict.
+		 */
+		if (!list_empty(&dev_priv->mm.request_list)) {
+			struct drm_i915_gem_request *request;
+
+			request = list_first_entry(&dev_priv->mm.request_list,
+						   struct drm_i915_gem_request,
+						   list);
+
+			ret = i915_wait_request(dev, request->seqno);
+			if (ret)
+				break;
+
+			/* if waiting caused an object to become inactive,
+			 * then loop around and wait for it. Otherwise, we
+			 * assume that waiting freed and unbound something,
+			 * so there should now be some space in the GTT
+			 */
+			if (!list_empty(&dev_priv->mm.inactive_list))
+				continue;
+			break;
+		}
+
+		/* If we didn't have anything on the request list but there
+		 * are buffers awaiting a flush, emit one and try again.
+		 * When we wait on it, those buffers waiting for that flush
+		 * will get moved to inactive.
+		 */
+		if (!list_empty(&dev_priv->mm.flushing_list)) {
+			obj_priv = list_first_entry(&dev_priv->mm.flushing_list,
+						    struct drm_i915_gem_object,
+						    list);
+			obj = obj_priv->obj;
+
+			i915_gem_flush(dev,
+				       obj->write_domain,
+				       obj->write_domain);
+			i915_add_request(dev, obj->write_domain);
+
+			obj = NULL;
+			continue;
+		}
+
+		DRM_ERROR("inactive empty %d request empty %d "
+			  "flushing empty %d\n",
+			  list_empty(&dev_priv->mm.inactive_list),
+			  list_empty(&dev_priv->mm.request_list),
+			  list_empty(&dev_priv->mm.flushing_list));
+		/* If we didn't do any of the above, there's nothing to be done
+		 * and we just can't fit it in.
+		 */
+		return -ENOMEM;
+	}
+	return ret;
+}
+
+static int
+i915_gem_object_get_page_list(struct drm_gem_object *obj)
+{
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
+	int page_count, i;
+	struct address_space *mapping;
+	struct inode *inode;
+	struct page *page;
+	int ret;
+
+	if (obj_priv->page_list)
+		return 0;
+
+	/* Get the list of pages out of our struct file.  They'll be pinned
+	 * at this point until we release them.
+	 */
+	page_count = obj->size / PAGE_SIZE;
+	BUG_ON(obj_priv->page_list != NULL);
+	obj_priv->page_list = drm_calloc(page_count, sizeof(struct page *),
+					 DRM_MEM_DRIVER);
+	if (obj_priv->page_list == NULL) {
+		DRM_ERROR("Faled to allocate page list\n");
+		return -ENOMEM;
+	}
+
+	inode = obj->filp->f_path.dentry->d_inode;
+	mapping = inode->i_mapping;
+	for (i = 0; i < page_count; i++) {
+		page = read_mapping_page(mapping, i, NULL);
+		if (IS_ERR(page)) {
+			ret = PTR_ERR(page);
+			DRM_ERROR("read_mapping_page failed: %d\n", ret);
+			i915_gem_object_free_page_list(obj);
+			return ret;
+		}
+		obj_priv->page_list[i] = page;
+	}
+	return 0;
+}
+
+/**
+ * Finds free space in the GTT aperture and binds the object there.
+ */
+static int
+i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment)
+{
+	struct drm_device *dev = obj->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
+	struct drm_mm_node *free_space;
+	int page_count, ret;
+
+	if (alignment == 0)
+		alignment = PAGE_SIZE;
+	if (alignment & (PAGE_SIZE - 1)) {
+		DRM_ERROR("Invalid object alignment requested %u\n", alignment);
+		return -EINVAL;
+	}
+
+ search_free:
+	free_space = drm_mm_search_free(&dev_priv->mm.gtt_space,
+					obj->size, alignment, 0);
+	if (free_space != NULL) {
+		obj_priv->gtt_space = drm_mm_get_block(free_space, obj->size,
+						       alignment);
+		if (obj_priv->gtt_space != NULL) {
+			obj_priv->gtt_space->private = obj;
+			obj_priv->gtt_offset = obj_priv->gtt_space->start;
+		}
+	}
+	if (obj_priv->gtt_space == NULL) {
+		/* If the gtt is empty and we're still having trouble
+		 * fitting our object in, we're out of memory.
+		 */
+#if WATCH_LRU
+		DRM_INFO("%s: GTT full, evicting something\n", __func__);
+#endif
+		if (list_empty(&dev_priv->mm.inactive_list) &&
+		    list_empty(&dev_priv->mm.flushing_list) &&
+		    list_empty(&dev_priv->mm.active_list)) {
+			DRM_ERROR("GTT full, but LRU list empty\n");
+			return -ENOMEM;
+		}
+
+		ret = i915_gem_evict_something(dev);
+		if (ret != 0) {
+			DRM_ERROR("Failed to evict a buffer %d\n", ret);
+			return ret;
+		}
+		goto search_free;
+	}
+
+#if WATCH_BUF
+	DRM_INFO("Binding object of size %d at 0x%08x\n",
+		 obj->size, obj_priv->gtt_offset);
+#endif
+	ret = i915_gem_object_get_page_list(obj);
+	if (ret) {
+		drm_mm_put_block(obj_priv->gtt_space);
+		obj_priv->gtt_space = NULL;
+		return ret;
+	}
+
+	page_count = obj->size / PAGE_SIZE;
+	/* Create an AGP memory structure pointing at our pages, and bind it
+	 * into the GTT.
+	 */
+	obj_priv->agp_mem = drm_agp_bind_pages(dev,
+					       obj_priv->page_list,
+					       page_count,
+					       obj_priv->gtt_offset);
+	if (obj_priv->agp_mem == NULL) {
+		i915_gem_object_free_page_list(obj);
+		drm_mm_put_block(obj_priv->gtt_space);
+		obj_priv->gtt_space = NULL;
+		return -ENOMEM;
+	}
+	atomic_inc(&dev->gtt_count);
+	atomic_add(obj->size, &dev->gtt_memory);
+
+	/* Assert that the object is not currently in any GPU domain. As it
+	 * wasn't in the GTT, there shouldn't be any way it could have been in
+	 * a GPU cache
+	 */
+	BUG_ON(obj->read_domains & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT));
+	BUG_ON(obj->write_domain & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT));
+
+	return 0;
+}
+
+void
+i915_gem_clflush_object(struct drm_gem_object *obj)
+{
+	struct drm_i915_gem_object	*obj_priv = obj->driver_private;
+
+	/* If we don't have a page list set up, then we're not pinned
+	 * to GPU, and we can ignore the cache flush because it'll happen
+	 * again at bind time.
+	 */
+	if (obj_priv->page_list == NULL)
+		return;
+
+	drm_clflush_pages(obj_priv->page_list, obj->size / PAGE_SIZE);
+}
+
+/*
+ * Set the next domain for the specified object. This
+ * may not actually perform the necessary flushing/invaliding though,
+ * as that may want to be batched with other set_domain operations
+ *
+ * This is (we hope) the only really tricky part of gem. The goal
+ * is fairly simple -- track which caches hold bits of the object
+ * and make sure they remain coherent. A few concrete examples may
+ * help to explain how it works. For shorthand, we use the notation
+ * (read_domains, write_domain), e.g. (CPU, CPU) to indicate the
+ * a pair of read and write domain masks.
+ *
+ * Case 1: the batch buffer
+ *
+ *	1. Allocated
+ *	2. Written by CPU
+ *	3. Mapped to GTT
+ *	4. Read by GPU
+ *	5. Unmapped from GTT
+ *	6. Freed
+ *
+ *	Let's take these a step at a time
+ *
+ *	1. Allocated
+ *		Pages allocated from the kernel may still have
+ *		cache contents, so we set them to (CPU, CPU) always.
+ *	2. Written by CPU (using pwrite)
+ *		The pwrite function calls set_domain (CPU, CPU) and
+ *		this function does nothing (as nothing changes)
+ *	3. Mapped by GTT
+ *		This function asserts that the object is not
+ *		currently in any GPU-based read or write domains
+ *	4. Read by GPU
+ *		i915_gem_execbuffer calls set_domain (COMMAND, 0).
+ *		As write_domain is zero, this function adds in the
+ *		current read domains (CPU+COMMAND, 0).
+ *		flush_domains is set to CPU.
+ *		invalidate_domains is set to COMMAND
+ *		clflush is run to get data out of the CPU caches
+ *		then i915_dev_set_domain calls i915_gem_flush to
+ *		emit an MI_FLUSH and drm_agp_chipset_flush
+ *	5. Unmapped from GTT
+ *		i915_gem_object_unbind calls set_domain (CPU, CPU)
+ *		flush_domains and invalidate_domains end up both zero
+ *		so no flushing/invalidating happens
+ *	6. Freed
+ *		yay, done
+ *
+ * Case 2: The shared render buffer
+ *
+ *	1. Allocated
+ *	2. Mapped to GTT
+ *	3. Read/written by GPU
+ *	4. set_domain to (CPU,CPU)
+ *	5. Read/written by CPU
+ *	6. Read/written by GPU
+ *
+ *	1. Allocated
+ *		Same as last example, (CPU, CPU)
+ *	2. Mapped to GTT
+ *		Nothing changes (assertions find that it is not in the GPU)
+ *	3. Read/written by GPU
+ *		execbuffer calls set_domain (RENDER, RENDER)
+ *		flush_domains gets CPU
+ *		invalidate_domains gets GPU
+ *		clflush (obj)
+ *		MI_FLUSH and drm_agp_chipset_flush
+ *	4. set_domain (CPU, CPU)
+ *		flush_domains gets GPU
+ *		invalidate_domains gets CPU
+ *		wait_rendering (obj) to make sure all drawing is complete.
+ *		This will include an MI_FLUSH to get the data from GPU
+ *		to memory
+ *		clflush (obj) to invalidate the CPU cache
+ *		Another MI_FLUSH in i915_gem_flush (eliminate this somehow?)
+ *	5. Read/written by CPU
+ *		cache lines are loaded and dirtied
+ *	6. Read written by GPU
+ *		Same as last GPU access
+ *
+ * Case 3: The constant buffer
+ *
+ *	1. Allocated
+ *	2. Written by CPU
+ *	3. Read by GPU
+ *	4. Updated (written) by CPU again
+ *	5. Read by GPU
+ *
+ *	1. Allocated
+ *		(CPU, CPU)
+ *	2. Written by CPU
+ *		(CPU, CPU)
+ *	3. Read by GPU
+ *		(CPU+RENDER, 0)
+ *		flush_domains = CPU
+ *		invalidate_domains = RENDER
+ *		clflush (obj)
+ *		MI_FLUSH
+ *		drm_agp_chipset_flush
+ *	4. Updated (written) by CPU again
+ *		(CPU, CPU)
+ *		flush_domains = 0 (no previous write domain)
+ *		invalidate_domains = 0 (no new read domains)
+ *	5. Read by GPU
+ *		(CPU+RENDER, 0)
+ *		flush_domains = CPU
+ *		invalidate_domains = RENDER
+ *		clflush (obj)
+ *		MI_FLUSH
+ *		drm_agp_chipset_flush
+ */
+static int
+i915_gem_object_set_domain(struct drm_gem_object *obj,
+			    uint32_t read_domains,
+			    uint32_t write_domain)
+{
+	struct drm_device		*dev = obj->dev;
+	struct drm_i915_gem_object	*obj_priv = obj->driver_private;
+	uint32_t			invalidate_domains = 0;
+	uint32_t			flush_domains = 0;
+	int				ret;
+
+#if WATCH_BUF
+	DRM_INFO("%s: object %p read %08x -> %08x write %08x -> %08x\n",
+		 __func__, obj,
+		 obj->read_domains, read_domains,
+		 obj->write_domain, write_domain);
+#endif
+	/*
+	 * If the object isn't moving to a new write domain,
+	 * let the object stay in multiple read domains
+	 */
+	if (write_domain == 0)
+		read_domains |= obj->read_domains;
+	else
+		obj_priv->dirty = 1;
+
+	/*
+	 * Flush the current write domain if
+	 * the new read domains don't match. Invalidate
+	 * any read domains which differ from the old
+	 * write domain
+	 */
+	if (obj->write_domain && obj->write_domain != read_domains) {
+		flush_domains |= obj->write_domain;
+		invalidate_domains |= read_domains & ~obj->write_domain;
+	}
+	/*
+	 * Invalidate any read caches which may have
+	 * stale data. That is, any new read domains.
+	 */
+	invalidate_domains |= read_domains & ~obj->read_domains;
+	if ((flush_domains | invalidate_domains) & I915_GEM_DOMAIN_CPU) {
+#if WATCH_BUF
+		DRM_INFO("%s: CPU domain flush %08x invalidate %08x\n",
+			 __func__, flush_domains, invalidate_domains);
+#endif
+		/*
+		 * If we're invaliding the CPU cache and flushing a GPU cache,
+		 * then pause for rendering so that the GPU caches will be
+		 * flushed before the cpu cache is invalidated
+		 */
+		if ((invalidate_domains & I915_GEM_DOMAIN_CPU) &&
+		    (flush_domains & ~(I915_GEM_DOMAIN_CPU |
+				       I915_GEM_DOMAIN_GTT))) {
+			ret = i915_gem_object_wait_rendering(obj);
+			if (ret)
+				return ret;
+		}
+		i915_gem_clflush_object(obj);
+	}
+
+	if ((write_domain | flush_domains) != 0)
+		obj->write_domain = write_domain;
+
+	/* If we're invalidating the CPU domain, clear the per-page CPU
+	 * domain list as well.
+	 */
+	if (obj_priv->page_cpu_valid != NULL &&
+	    (write_domain != 0 ||
+	     read_domains & I915_GEM_DOMAIN_CPU)) {
+		drm_free(obj_priv->page_cpu_valid, obj->size / PAGE_SIZE,
+			 DRM_MEM_DRIVER);
+		obj_priv->page_cpu_valid = NULL;
+	}
+	obj->read_domains = read_domains;
+
+	dev->invalidate_domains |= invalidate_domains;
+	dev->flush_domains |= flush_domains;
+#if WATCH_BUF
+	DRM_INFO("%s: read %08x write %08x invalidate %08x flush %08x\n",
+		 __func__,
+		 obj->read_domains, obj->write_domain,
+		 dev->invalidate_domains, dev->flush_domains);
+#endif
+	return 0;
+}
+
+/**
+ * Set the read/write domain on a range of the object.
+ *
+ * Currently only implemented for CPU reads, otherwise drops to normal
+ * i915_gem_object_set_domain().
+ */
+static int
+i915_gem_object_set_domain_range(struct drm_gem_object *obj,
+				 uint64_t offset,
+				 uint64_t size,
+				 uint32_t read_domains,
+				 uint32_t write_domain)
+{
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
+	int ret, i;
+
+	if (obj->read_domains & I915_GEM_DOMAIN_CPU)
+		return 0;
+
+	if (read_domains != I915_GEM_DOMAIN_CPU ||
+	    write_domain != 0)
+		return i915_gem_object_set_domain(obj,
+						  read_domains, write_domain);
+
+	/* Wait on any GPU rendering to the object to be flushed. */
+	if (obj->write_domain & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) {
+		ret = i915_gem_object_wait_rendering(obj);
+		if (ret)
+			return ret;
+	}
+
+	if (obj_priv->page_cpu_valid == NULL) {
+		obj_priv->page_cpu_valid = drm_calloc(1, obj->size / PAGE_SIZE,
+						      DRM_MEM_DRIVER);
+	}
+
+	/* Flush the cache on any pages that are still invalid from the CPU's
+	 * perspective.
+	 */
+	for (i = offset / PAGE_SIZE; i <= (offset + size - 1) / PAGE_SIZE; i++) {
+		if (obj_priv->page_cpu_valid[i])
+			continue;
+
+		drm_clflush_pages(obj_priv->page_list + i, 1);
+
+		obj_priv->page_cpu_valid[i] = 1;
+	}
+
+	return 0;
+}
+
+/**
+ * Once all of the objects have been set in the proper domain,
+ * perform the necessary flush and invalidate operations.
+ *
+ * Returns the write domains flushed, for use in flush tracking.
+ */
+static uint32_t
+i915_gem_dev_set_domain(struct drm_device *dev)
+{
+	uint32_t flush_domains = dev->flush_domains;
+
+	/*
+	 * Now that all the buffers are synced to the proper domains,
+	 * flush and invalidate the collected domains
+	 */
+	if (dev->invalidate_domains | dev->flush_domains) {
+#if WATCH_EXEC
+		DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n",
+			  __func__,
+			 dev->invalidate_domains,
+			 dev->flush_domains);
+#endif
+		i915_gem_flush(dev,
+			       dev->invalidate_domains,
+			       dev->flush_domains);
+		dev->invalidate_domains = 0;
+		dev->flush_domains = 0;
+	}
+
+	return flush_domains;
+}
+
+/**
+ * Pin an object to the GTT and evaluate the relocations landing in it.
+ */
+static int
+i915_gem_object_pin_and_relocate(struct drm_gem_object *obj,
+				 struct drm_file *file_priv,
+				 struct drm_i915_gem_exec_object *entry)
+{
+	struct drm_device *dev = obj->dev;
+	struct drm_i915_gem_relocation_entry reloc;
+	struct drm_i915_gem_relocation_entry __user *relocs;
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
+	int i, ret;
+	uint32_t last_reloc_offset = -1;
+	void *reloc_page = NULL;
+
+	/* Choose the GTT offset for our buffer and put it there. */
+	ret = i915_gem_object_pin(obj, (uint32_t) entry->alignment);
+	if (ret)
+		return ret;
+
+	entry->offset = obj_priv->gtt_offset;
+
+	relocs = (struct drm_i915_gem_relocation_entry __user *)
+		 (uintptr_t) entry->relocs_ptr;
+	/* Apply the relocations, using the GTT aperture to avoid cache
+	 * flushing requirements.
+	 */
+	for (i = 0; i < entry->relocation_count; i++) {
+		struct drm_gem_object *target_obj;
+		struct drm_i915_gem_object *target_obj_priv;
+		uint32_t reloc_val, reloc_offset, *reloc_entry;
+		int ret;
+
+		ret = copy_from_user(&reloc, relocs + i, sizeof(reloc));
+		if (ret != 0) {
+			i915_gem_object_unpin(obj);
+			return ret;
+		}
+
+		target_obj = drm_gem_object_lookup(obj->dev, file_priv,
+						   reloc.target_handle);
+		if (target_obj == NULL) {
+			i915_gem_object_unpin(obj);
+			return -EBADF;
+		}
+		target_obj_priv = target_obj->driver_private;
+
+		/* The target buffer should have appeared before us in the
+		 * exec_object list, so it should have a GTT space bound by now.
+		 */
+		if (target_obj_priv->gtt_space == NULL) {
+			DRM_ERROR("No GTT space found for object %d\n",
+				  reloc.target_handle);
+			drm_gem_object_unreference(target_obj);
+			i915_gem_object_unpin(obj);
+			return -EINVAL;
+		}
+
+		if (reloc.offset > obj->size - 4) {
+			DRM_ERROR("Relocation beyond object bounds: "
+				  "obj %p target %d offset %d size %d.\n",
+				  obj, reloc.target_handle,
+				  (int) reloc.offset, (int) obj->size);
+			drm_gem_object_unreference(target_obj);
+			i915_gem_object_unpin(obj);
+			return -EINVAL;
+		}
+		if (reloc.offset & 3) {
+			DRM_ERROR("Relocation not 4-byte aligned: "
+				  "obj %p target %d offset %d.\n",
+				  obj, reloc.target_handle,
+				  (int) reloc.offset);
+			drm_gem_object_unreference(target_obj);
+			i915_gem_object_unpin(obj);
+			return -EINVAL;
+		}
+
+		if (reloc.write_domain && target_obj->pending_write_domain &&
+		    reloc.write_domain != target_obj->pending_write_domain) {
+			DRM_ERROR("Write domain conflict: "
+				  "obj %p target %d offset %d "
+				  "new %08x old %08x\n",
+				  obj, reloc.target_handle,
+				  (int) reloc.offset,
+				  reloc.write_domain,
+				  target_obj->pending_write_domain);
+			drm_gem_object_unreference(target_obj);
+			i915_gem_object_unpin(obj);
+			return -EINVAL;
+		}
+
+#if WATCH_RELOC
+		DRM_INFO("%s: obj %p offset %08x target %d "
+			 "read %08x write %08x gtt %08x "
+			 "presumed %08x delta %08x\n",
+			 __func__,
+			 obj,
+			 (int) reloc.offset,
+			 (int) reloc.target_handle,
+			 (int) reloc.read_domains,
+			 (int) reloc.write_domain,
+			 (int) target_obj_priv->gtt_offset,
+			 (int) reloc.presumed_offset,
+			 reloc.delta);
+#endif
+
+		target_obj->pending_read_domains |= reloc.read_domains;
+		target_obj->pending_write_domain |= reloc.write_domain;
+
+		/* If the relocation already has the right value in it, no
+		 * more work needs to be done.
+		 */
+		if (target_obj_priv->gtt_offset == reloc.presumed_offset) {
+			drm_gem_object_unreference(target_obj);
+			continue;
+		}
+
+		/* Now that we're going to actually write some data in,
+		 * make sure that any rendering using this buffer's contents
+		 * is completed.
+		 */
+		i915_gem_object_wait_rendering(obj);
+
+		/* As we're writing through the gtt, flush
+		 * any CPU writes before we write the relocations
+		 */
+		if (obj->write_domain & I915_GEM_DOMAIN_CPU) {
+			i915_gem_clflush_object(obj);
+			drm_agp_chipset_flush(dev);
+			obj->write_domain = 0;
+		}
+
+		/* Map the page containing the relocation we're going to
+		 * perform.
+		 */
+		reloc_offset = obj_priv->gtt_offset + reloc.offset;
+		if (reloc_page == NULL ||
+		    (last_reloc_offset & ~(PAGE_SIZE - 1)) !=
+		    (reloc_offset & ~(PAGE_SIZE - 1))) {
+			if (reloc_page != NULL)
+				iounmap(reloc_page);
+
+			reloc_page = ioremap(dev->agp->base +
+					     (reloc_offset & ~(PAGE_SIZE - 1)),
+					     PAGE_SIZE);
+			last_reloc_offset = reloc_offset;
+			if (reloc_page == NULL) {
+				drm_gem_object_unreference(target_obj);
+				i915_gem_object_unpin(obj);
+				return -ENOMEM;
+			}
+		}
+
+		reloc_entry = (uint32_t *)((char *)reloc_page +
+					   (reloc_offset & (PAGE_SIZE - 1)));
+		reloc_val = target_obj_priv->gtt_offset + reloc.delta;
+
+#if WATCH_BUF
+		DRM_INFO("Applied relocation: %p@0x%08x %08x -> %08x\n",
+			  obj, (unsigned int) reloc.offset,
+			  readl(reloc_entry), reloc_val);
+#endif
+		writel(reloc_val, reloc_entry);
+
+		/* Write the updated presumed offset for this entry back out
+		 * to the user.
+		 */
+		reloc.presumed_offset = target_obj_priv->gtt_offset;
+		ret = copy_to_user(relocs + i, &reloc, sizeof(reloc));
+		if (ret != 0) {
+			drm_gem_object_unreference(target_obj);
+			i915_gem_object_unpin(obj);
+			return ret;
+		}
+
+		drm_gem_object_unreference(target_obj);
+	}
+
+	if (reloc_page != NULL)
+		iounmap(reloc_page);
+
+#if WATCH_BUF
+	if (0)
+		i915_gem_dump_object(obj, 128, __func__, ~0);
+#endif
+	return 0;
+}
+
+/** Dispatch a batchbuffer to the ring
+ */
+static int
+i915_dispatch_gem_execbuffer(struct drm_device *dev,
+			      struct drm_i915_gem_execbuffer *exec,
+			      uint64_t exec_offset)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_clip_rect __user *boxes = (struct drm_clip_rect __user *)
+					     (uintptr_t) exec->cliprects_ptr;
+	int nbox = exec->num_cliprects;
+	int i = 0, count;
+	uint32_t	exec_start, exec_len;
+	RING_LOCALS;
+
+	exec_start = (uint32_t) exec_offset + exec->batch_start_offset;
+	exec_len = (uint32_t) exec->batch_len;
+
+	if ((exec_start | exec_len) & 0x7) {
+		DRM_ERROR("alignment\n");
+		return -EINVAL;
+	}
+
+	if (!exec_start)
+		return -EINVAL;
+
+	count = nbox ? nbox : 1;
+
+	for (i = 0; i < count; i++) {
+		if (i < nbox) {
+			int ret = i915_emit_box(dev, boxes, i,
+						exec->DR1, exec->DR4);
+			if (ret)
+				return ret;
+		}
+
+		if (IS_I830(dev) || IS_845G(dev)) {
+			BEGIN_LP_RING(4);
+			OUT_RING(MI_BATCH_BUFFER);
+			OUT_RING(exec_start | MI_BATCH_NON_SECURE);
+			OUT_RING(exec_start + exec_len - 4);
+			OUT_RING(0);
+			ADVANCE_LP_RING();
+		} else {
+			BEGIN_LP_RING(2);
+			if (IS_I965G(dev)) {
+				OUT_RING(MI_BATCH_BUFFER_START |
+					 (2 << 6) |
+					 MI_BATCH_NON_SECURE_I965);
+				OUT_RING(exec_start);
+			} else {
+				OUT_RING(MI_BATCH_BUFFER_START |
+					 (2 << 6));
+				OUT_RING(exec_start | MI_BATCH_NON_SECURE);
+			}
+			ADVANCE_LP_RING();
+		}
+	}
+
+	/* XXX breadcrumb */
+	return 0;
+}
+
+/* Throttle our rendering by waiting until the ring has completed our requests
+ * emitted over 20 msec ago.
+ *
+ * This should get us reasonable parallelism between CPU and GPU but also
+ * relatively low latency when blocking on a particular request to finish.
+ */
+static int
+i915_gem_ring_throttle(struct drm_device *dev, struct drm_file *file_priv)
+{
+	struct drm_i915_file_private *i915_file_priv = file_priv->driver_priv;
+	int ret = 0;
+	uint32_t seqno;
+
+	mutex_lock(&dev->struct_mutex);
+	seqno = i915_file_priv->mm.last_gem_throttle_seqno;
+	i915_file_priv->mm.last_gem_throttle_seqno =
+		i915_file_priv->mm.last_gem_seqno;
+	if (seqno)
+		ret = i915_wait_request(dev, seqno);
+	mutex_unlock(&dev->struct_mutex);
+	return ret;
+}
+
+int
+i915_gem_execbuffer(struct drm_device *dev, void *data,
+		    struct drm_file *file_priv)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_file_private *i915_file_priv = file_priv->driver_priv;
+	struct drm_i915_gem_execbuffer *args = data;
+	struct drm_i915_gem_exec_object *exec_list = NULL;
+	struct drm_gem_object **object_list = NULL;
+	struct drm_gem_object *batch_obj;
+	int ret, i, pinned = 0;
+	uint64_t exec_offset;
+	uint32_t seqno, flush_domains;
+
+#if WATCH_EXEC
+	DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n",
+		  (int) args->buffers_ptr, args->buffer_count, args->batch_len);
+#endif
+
+	/* Copy in the exec list from userland */
+	exec_list = drm_calloc(sizeof(*exec_list), args->buffer_count,
+			       DRM_MEM_DRIVER);
+	object_list = drm_calloc(sizeof(*object_list), args->buffer_count,
+				 DRM_MEM_DRIVER);
+	if (exec_list == NULL || object_list == NULL) {
+		DRM_ERROR("Failed to allocate exec or object list "
+			  "for %d buffers\n",
+			  args->buffer_count);
+		ret = -ENOMEM;
+		goto pre_mutex_err;
+	}
+	ret = copy_from_user(exec_list,
+			     (struct drm_i915_relocation_entry __user *)
+			     (uintptr_t) args->buffers_ptr,
+			     sizeof(*exec_list) * args->buffer_count);
+	if (ret != 0) {
+		DRM_ERROR("copy %d exec entries failed %d\n",
+			  args->buffer_count, ret);
+		goto pre_mutex_err;
+	}
+
+	mutex_lock(&dev->struct_mutex);
+
+	i915_verify_inactive(dev, __FILE__, __LINE__);
+
+	if (dev_priv->mm.wedged) {
+		DRM_ERROR("Execbuf while wedged\n");
+		mutex_unlock(&dev->struct_mutex);
+		return -EIO;
+	}
+
+	if (dev_priv->mm.suspended) {
+		DRM_ERROR("Execbuf while VT-switched.\n");
+		mutex_unlock(&dev->struct_mutex);
+		return -EBUSY;
+	}
+
+	/* Zero the gloabl flush/invalidate flags. These
+	 * will be modified as each object is bound to the
+	 * gtt
+	 */
+	dev->invalidate_domains = 0;
+	dev->flush_domains = 0;
+
+	/* Look up object handles and perform the relocations */
+	for (i = 0; i < args->buffer_count; i++) {
+		object_list[i] = drm_gem_object_lookup(dev, file_priv,
+						       exec_list[i].handle);
+		if (object_list[i] == NULL) {
+			DRM_ERROR("Invalid object handle %d at index %d\n",
+				   exec_list[i].handle, i);
+			ret = -EBADF;
+			goto err;
+		}
+
+		object_list[i]->pending_read_domains = 0;
+		object_list[i]->pending_write_domain = 0;
+		ret = i915_gem_object_pin_and_relocate(object_list[i],
+						       file_priv,
+						       &exec_list[i]);
+		if (ret) {
+			DRM_ERROR("object bind and relocate failed %d\n", ret);
+			goto err;
+		}
+		pinned = i + 1;
+	}
+
+	/* Set the pending read domains for the batch buffer to COMMAND */
+	batch_obj = object_list[args->buffer_count-1];
+	batch_obj->pending_read_domains = I915_GEM_DOMAIN_COMMAND;
+	batch_obj->pending_write_domain = 0;
+
+	i915_verify_inactive(dev, __FILE__, __LINE__);
+
+	for (i = 0; i < args->buffer_count; i++) {
+		struct drm_gem_object *obj = object_list[i];
+		struct drm_i915_gem_object *obj_priv = obj->driver_private;
+
+		if (obj_priv->gtt_space == NULL) {
+			/* We evicted the buffer in the process of validating
+			 * our set of buffers in.  We could try to recover by
+			 * kicking them everything out and trying again from
+			 * the start.
+			 */
+			ret = -ENOMEM;
+			goto err;
+		}
+
+		/* make sure all previous memory operations have passed */
+		ret = i915_gem_object_set_domain(obj,
+						 obj->pending_read_domains,
+						 obj->pending_write_domain);
+		if (ret)
+			goto err;
+	}
+
+	i915_verify_inactive(dev, __FILE__, __LINE__);
+
+	/* Flush/invalidate caches and chipset buffer */
+	flush_domains = i915_gem_dev_set_domain(dev);
+
+	i915_verify_inactive(dev, __FILE__, __LINE__);
+
+#if WATCH_COHERENCY
+	for (i = 0; i < args->buffer_count; i++) {
+		i915_gem_object_check_coherency(object_list[i],
+						exec_list[i].handle);
+	}
+#endif
+
+	exec_offset = exec_list[args->buffer_count - 1].offset;
+
+#if WATCH_EXEC
+	i915_gem_dump_object(object_list[args->buffer_count - 1],
+			      args->batch_len,
+			      __func__,
+			      ~0);
+#endif
+
+	(void)i915_add_request(dev, flush_domains);
+
+	/* Exec the batchbuffer */
+	ret = i915_dispatch_gem_execbuffer(dev, args, exec_offset);
+	if (ret) {
+		DRM_ERROR("dispatch failed %d\n", ret);
+		goto err;
+	}
+
+	/*
+	 * Ensure that the commands in the batch buffer are
+	 * finished before the interrupt fires
+	 */
+	flush_domains = i915_retire_commands(dev);
+
+	i915_verify_inactive(dev, __FILE__, __LINE__);
+
+	/*
+	 * Get a seqno representing the execution of the current buffer,
+	 * which we can wait on.  We would like to mitigate these interrupts,
+	 * likely by only creating seqnos occasionally (so that we have
+	 * *some* interrupts representing completion of buffers that we can
+	 * wait on when trying to clear up gtt space).
+	 */
+	seqno = i915_add_request(dev, flush_domains);
+	BUG_ON(seqno == 0);
+	i915_file_priv->mm.last_gem_seqno = seqno;
+	for (i = 0; i < args->buffer_count; i++) {
+		struct drm_gem_object *obj = object_list[i];
+		struct drm_i915_gem_object *obj_priv = obj->driver_private;
+
+		i915_gem_object_move_to_active(obj);
+		obj_priv->last_rendering_seqno = seqno;
+#if WATCH_LRU
+		DRM_INFO("%s: move to exec list %p\n", __func__, obj);
+#endif
+	}
+#if WATCH_LRU
+	i915_dump_lru(dev, __func__);
+#endif
+
+	i915_verify_inactive(dev, __FILE__, __LINE__);
+
+	/* Copy the new buffer offsets back to the user's exec list. */
+	ret = copy_to_user((struct drm_i915_relocation_entry __user *)
+			   (uintptr_t) args->buffers_ptr,
+			   exec_list,
+			   sizeof(*exec_list) * args->buffer_count);
+	if (ret)
+		DRM_ERROR("failed to copy %d exec entries "
+			  "back to user (%d)\n",
+			   args->buffer_count, ret);
+err:
+	if (object_list != NULL) {
+		for (i = 0; i < pinned; i++)
+			i915_gem_object_unpin(object_list[i]);
+
+		for (i = 0; i < args->buffer_count; i++)
+			drm_gem_object_unreference(object_list[i]);
+	}
+	mutex_unlock(&dev->struct_mutex);
+
+pre_mutex_err:
+	drm_free(object_list, sizeof(*object_list) * args->buffer_count,
+		 DRM_MEM_DRIVER);
+	drm_free(exec_list, sizeof(*exec_list) * args->buffer_count,
+		 DRM_MEM_DRIVER);
+
+	return ret;
+}
+
+int
+i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment)
+{
+	struct drm_device *dev = obj->dev;
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
+	int ret;
+
+	i915_verify_inactive(dev, __FILE__, __LINE__);
+	if (obj_priv->gtt_space == NULL) {
+		ret = i915_gem_object_bind_to_gtt(obj, alignment);
+		if (ret != 0) {
+			DRM_ERROR("Failure to bind: %d", ret);
+			return ret;
+		}
+	}
+	obj_priv->pin_count++;
+
+	/* If the object is not active and not pending a flush,
+	 * remove it from the inactive list
+	 */
+	if (obj_priv->pin_count == 1) {
+		atomic_inc(&dev->pin_count);
+		atomic_add(obj->size, &dev->pin_memory);
+		if (!obj_priv->active &&
+		    (obj->write_domain & ~(I915_GEM_DOMAIN_CPU |
+					   I915_GEM_DOMAIN_GTT)) == 0 &&
+		    !list_empty(&obj_priv->list))
+			list_del_init(&obj_priv->list);
+	}
+	i915_verify_inactive(dev, __FILE__, __LINE__);
+
+	return 0;
+}
+
+void
+i915_gem_object_unpin(struct drm_gem_object *obj)
+{
+	struct drm_device *dev = obj->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
+
+	i915_verify_inactive(dev, __FILE__, __LINE__);
+	obj_priv->pin_count--;
+	BUG_ON(obj_priv->pin_count < 0);
+	BUG_ON(obj_priv->gtt_space == NULL);
+
+	/* If the object is no longer pinned, and is
+	 * neither active nor being flushed, then stick it on
+	 * the inactive list
+	 */
+	if (obj_priv->pin_count == 0) {
+		if (!obj_priv->active &&
+		    (obj->write_domain & ~(I915_GEM_DOMAIN_CPU |
+					   I915_GEM_DOMAIN_GTT)) == 0)
+			list_move_tail(&obj_priv->list,
+				       &dev_priv->mm.inactive_list);
+		atomic_dec(&dev->pin_count);
+		atomic_sub(obj->size, &dev->pin_memory);
+	}
+	i915_verify_inactive(dev, __FILE__, __LINE__);
+}
+
+int
+i915_gem_pin_ioctl(struct drm_device *dev, void *data,
+		   struct drm_file *file_priv)
+{
+	struct drm_i915_gem_pin *args = data;
+	struct drm_gem_object *obj;
+	struct drm_i915_gem_object *obj_priv;
+	int ret;
+
+	mutex_lock(&dev->struct_mutex);
+
+	obj = drm_gem_object_lookup(dev, file_priv, args->handle);
+	if (obj == NULL) {
+		DRM_ERROR("Bad handle in i915_gem_pin_ioctl(): %d\n",
+			  args->handle);
+		mutex_unlock(&dev->struct_mutex);
+		return -EBADF;
+	}
+	obj_priv = obj->driver_private;
+
+	ret = i915_gem_object_pin(obj, args->alignment);
+	if (ret != 0) {
+		drm_gem_object_unreference(obj);
+		mutex_unlock(&dev->struct_mutex);
+		return ret;
+	}
+
+	/* XXX - flush the CPU caches for pinned objects
+	 * as the X server doesn't manage domains yet
+	 */
+	if (obj->write_domain & I915_GEM_DOMAIN_CPU) {
+		i915_gem_clflush_object(obj);
+		drm_agp_chipset_flush(dev);
+		obj->write_domain = 0;
+	}
+	args->offset = obj_priv->gtt_offset;
+	drm_gem_object_unreference(obj);
+	mutex_unlock(&dev->struct_mutex);
+
+	return 0;
+}
+
+int
+i915_gem_unpin_ioctl(struct drm_device *dev, void *data,
+		     struct drm_file *file_priv)
+{
+	struct drm_i915_gem_pin *args = data;
+	struct drm_gem_object *obj;
+
+	mutex_lock(&dev->struct_mutex);
+
+	obj = drm_gem_object_lookup(dev, file_priv, args->handle);
+	if (obj == NULL) {
+		DRM_ERROR("Bad handle in i915_gem_unpin_ioctl(): %d\n",
+			  args->handle);
+		mutex_unlock(&dev->struct_mutex);
+		return -EBADF;
+	}
+
+	i915_gem_object_unpin(obj);
+
+	drm_gem_object_unreference(obj);
+	mutex_unlock(&dev->struct_mutex);
+	return 0;
+}
+
+int
+i915_gem_busy_ioctl(struct drm_device *dev, void *data,
+		    struct drm_file *file_priv)
+{
+	struct drm_i915_gem_busy *args = data;
+	struct drm_gem_object *obj;
+	struct drm_i915_gem_object *obj_priv;
+
+	mutex_lock(&dev->struct_mutex);
+	obj = drm_gem_object_lookup(dev, file_priv, args->handle);
+	if (obj == NULL) {
+		DRM_ERROR("Bad handle in i915_gem_busy_ioctl(): %d\n",
+			  args->handle);
+		mutex_unlock(&dev->struct_mutex);
+		return -EBADF;
+	}
+
+	obj_priv = obj->driver_private;
+	args->busy = obj_priv->active;
+
+	drm_gem_object_unreference(obj);
+	mutex_unlock(&dev->struct_mutex);
+	return 0;
+}
+
+int
+i915_gem_throttle_ioctl(struct drm_device *dev, void *data,
+			struct drm_file *file_priv)
+{
+    return i915_gem_ring_throttle(dev, file_priv);
+}
+
+int i915_gem_init_object(struct drm_gem_object *obj)
+{
+	struct drm_i915_gem_object *obj_priv;
+
+	obj_priv = drm_calloc(1, sizeof(*obj_priv), DRM_MEM_DRIVER);
+	if (obj_priv == NULL)
+		return -ENOMEM;
+
+	/*
+	 * We've just allocated pages from the kernel,
+	 * so they've just been written by the CPU with
+	 * zeros. They'll need to be clflushed before we
+	 * use them with the GPU.
+	 */
+	obj->write_domain = I915_GEM_DOMAIN_CPU;
+	obj->read_domains = I915_GEM_DOMAIN_CPU;
+
+	obj->driver_private = obj_priv;
+	obj_priv->obj = obj;
+	INIT_LIST_HEAD(&obj_priv->list);
+	return 0;
+}
+
+void i915_gem_free_object(struct drm_gem_object *obj)
+{
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
+
+	while (obj_priv->pin_count > 0)
+		i915_gem_object_unpin(obj);
+
+	i915_gem_object_unbind(obj);
+
+	drm_free(obj_priv->page_cpu_valid, 1, DRM_MEM_DRIVER);
+	drm_free(obj->driver_private, 1, DRM_MEM_DRIVER);
+}
+
+static int
+i915_gem_set_domain(struct drm_gem_object *obj,
+		    struct drm_file *file_priv,
+		    uint32_t read_domains,
+		    uint32_t write_domain)
+{
+	struct drm_device *dev = obj->dev;
+	int ret;
+	uint32_t flush_domains;
+
+	BUG_ON(!mutex_is_locked(&dev->struct_mutex));
+
+	ret = i915_gem_object_set_domain(obj, read_domains, write_domain);
+	if (ret)
+		return ret;
+	flush_domains = i915_gem_dev_set_domain(obj->dev);
+
+	if (flush_domains & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT))
+		(void) i915_add_request(dev, flush_domains);
+
+	return 0;
+}
+
+/** Unbinds all objects that are on the given buffer list. */
+static int
+i915_gem_evict_from_list(struct drm_device *dev, struct list_head *head)
+{
+	struct drm_gem_object *obj;
+	struct drm_i915_gem_object *obj_priv;
+	int ret;
+
+	while (!list_empty(head)) {
+		obj_priv = list_first_entry(head,
+					    struct drm_i915_gem_object,
+					    list);
+		obj = obj_priv->obj;
+
+		if (obj_priv->pin_count != 0) {
+			DRM_ERROR("Pinned object in unbind list\n");
+			mutex_unlock(&dev->struct_mutex);
+			return -EINVAL;
+		}
+
+		ret = i915_gem_object_unbind(obj);
+		if (ret != 0) {
+			DRM_ERROR("Error unbinding object in LeaveVT: %d\n",
+				  ret);
+			mutex_unlock(&dev->struct_mutex);
+			return ret;
+		}
+	}
+
+
+	return 0;
+}
+
+static int
+i915_gem_idle(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	uint32_t seqno, cur_seqno, last_seqno;
+	int stuck, ret;
+
+	if (dev_priv->mm.suspended)
+		return 0;
+
+	/* Hack!  Don't let anybody do execbuf while we don't control the chip.
+	 * We need to replace this with a semaphore, or something.
+	 */
+	dev_priv->mm.suspended = 1;
+
+	i915_kernel_lost_context(dev);
+
+	/* Flush the GPU along with all non-CPU write domains
+	 */
+	i915_gem_flush(dev, ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT),
+		       ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT));
+	seqno = i915_add_request(dev, ~(I915_GEM_DOMAIN_CPU |
+					I915_GEM_DOMAIN_GTT));
+
+	if (seqno == 0) {
+		mutex_unlock(&dev->struct_mutex);
+		return -ENOMEM;
+	}
+
+	dev_priv->mm.waiting_gem_seqno = seqno;
+	last_seqno = 0;
+	stuck = 0;
+	for (;;) {
+		cur_seqno = i915_get_gem_seqno(dev);
+		if (i915_seqno_passed(cur_seqno, seqno))
+			break;
+		if (last_seqno == cur_seqno) {
+			if (stuck++ > 100) {
+				DRM_ERROR("hardware wedged\n");
+				dev_priv->mm.wedged = 1;
+				DRM_WAKEUP(&dev_priv->irq_queue);
+				break;
+			}
+		}
+		msleep(10);
+		last_seqno = cur_seqno;
+	}
+	dev_priv->mm.waiting_gem_seqno = 0;
+
+	i915_gem_retire_requests(dev);
+
+	/* Active and flushing should now be empty as we've
+	 * waited for a sequence higher than any pending execbuffer
+	 */
+	BUG_ON(!list_empty(&dev_priv->mm.active_list));
+	BUG_ON(!list_empty(&dev_priv->mm.flushing_list));
+
+	/* Request should now be empty as we've also waited
+	 * for the last request in the list
+	 */
+	BUG_ON(!list_empty(&dev_priv->mm.request_list));
+
+	/* Move all buffers out of the GTT. */
+	ret = i915_gem_evict_from_list(dev, &dev_priv->mm.inactive_list);
+	if (ret)
+		return ret;
+
+	BUG_ON(!list_empty(&dev_priv->mm.active_list));
+	BUG_ON(!list_empty(&dev_priv->mm.flushing_list));
+	BUG_ON(!list_empty(&dev_priv->mm.inactive_list));
+	BUG_ON(!list_empty(&dev_priv->mm.request_list));
+	return 0;
+}
+
+static int
+i915_gem_init_hws(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_gem_object *obj;
+	struct drm_i915_gem_object *obj_priv;
+	int ret;
+
+	/* If we need a physical address for the status page, it's already
+	 * initialized at driver load time.
+	 */
+	if (!I915_NEED_GFX_HWS(dev))
+		return 0;
+
+	obj = drm_gem_object_alloc(dev, 4096);
+	if (obj == NULL) {
+		DRM_ERROR("Failed to allocate status page\n");
+		return -ENOMEM;
+	}
+	obj_priv = obj->driver_private;
+
+	ret = i915_gem_object_pin(obj, 4096);
+	if (ret != 0) {
+		drm_gem_object_unreference(obj);
+		return ret;
+	}
+
+	dev_priv->status_gfx_addr = obj_priv->gtt_offset;
+	dev_priv->hws_map.offset = dev->agp->base + obj_priv->gtt_offset;
+	dev_priv->hws_map.size = 4096;
+	dev_priv->hws_map.type = 0;
+	dev_priv->hws_map.flags = 0;
+	dev_priv->hws_map.mtrr = 0;
+
+	drm_core_ioremap(&dev_priv->hws_map, dev);
+	if (dev_priv->hws_map.handle == NULL) {
+		DRM_ERROR("Failed to map status page.\n");
+		memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map));
+		drm_gem_object_unreference(obj);
+		return -EINVAL;
+	}
+	dev_priv->hws_obj = obj;
+	dev_priv->hw_status_page = dev_priv->hws_map.handle;
+	memset(dev_priv->hw_status_page, 0, PAGE_SIZE);
+	I915_WRITE(HWS_PGA, dev_priv->status_gfx_addr);
+	DRM_DEBUG("hws offset: 0x%08x\n", dev_priv->status_gfx_addr);
+
+	return 0;
+}
+
+static int
+i915_gem_init_ringbuffer(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_gem_object *obj;
+	struct drm_i915_gem_object *obj_priv;
+	int ret;
+
+	ret = i915_gem_init_hws(dev);
+	if (ret != 0)
+		return ret;
+
+	obj = drm_gem_object_alloc(dev, 128 * 1024);
+	if (obj == NULL) {
+		DRM_ERROR("Failed to allocate ringbuffer\n");
+		return -ENOMEM;
+	}
+	obj_priv = obj->driver_private;
+
+	ret = i915_gem_object_pin(obj, 4096);
+	if (ret != 0) {
+		drm_gem_object_unreference(obj);
+		return ret;
+	}
+
+	/* Set up the kernel mapping for the ring. */
+	dev_priv->ring.Size = obj->size;
+	dev_priv->ring.tail_mask = obj->size - 1;
+
+	dev_priv->ring.map.offset = dev->agp->base + obj_priv->gtt_offset;
+	dev_priv->ring.map.size = obj->size;
+	dev_priv->ring.map.type = 0;
+	dev_priv->ring.map.flags = 0;
+	dev_priv->ring.map.mtrr = 0;
+
+	drm_core_ioremap(&dev_priv->ring.map, dev);
+	if (dev_priv->ring.map.handle == NULL) {
+		DRM_ERROR("Failed to map ringbuffer.\n");
+		memset(&dev_priv->ring, 0, sizeof(dev_priv->ring));
+		drm_gem_object_unreference(obj);
+		return -EINVAL;
+	}
+	dev_priv->ring.ring_obj = obj;
+	dev_priv->ring.virtual_start = dev_priv->ring.map.handle;
+
+	/* Stop the ring if it's running. */
+	I915_WRITE(PRB0_CTL, 0);
+	I915_WRITE(PRB0_HEAD, 0);
+	I915_WRITE(PRB0_TAIL, 0);
+	I915_WRITE(PRB0_START, 0);
+
+	/* Initialize the ring. */
+	I915_WRITE(PRB0_START, obj_priv->gtt_offset);
+	I915_WRITE(PRB0_CTL,
+		   ((obj->size - 4096) & RING_NR_PAGES) |
+		   RING_NO_REPORT |
+		   RING_VALID);
+
+	/* Update our cache of the ring state */
+	i915_kernel_lost_context(dev);
+
+	return 0;
+}
+
+static void
+i915_gem_cleanup_ringbuffer(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+
+	if (dev_priv->ring.ring_obj == NULL)
+		return;
+
+	drm_core_ioremapfree(&dev_priv->ring.map, dev);
+
+	i915_gem_object_unpin(dev_priv->ring.ring_obj);
+	drm_gem_object_unreference(dev_priv->ring.ring_obj);
+	dev_priv->ring.ring_obj = NULL;
+	memset(&dev_priv->ring, 0, sizeof(dev_priv->ring));
+
+	if (dev_priv->hws_obj != NULL) {
+		i915_gem_object_unpin(dev_priv->hws_obj);
+		drm_gem_object_unreference(dev_priv->hws_obj);
+		dev_priv->hws_obj = NULL;
+		memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map));
+
+		/* Write high address into HWS_PGA when disabling. */
+		I915_WRITE(HWS_PGA, 0x1ffff000);
+	}
+}
+
+int
+i915_gem_entervt_ioctl(struct drm_device *dev, void *data,
+		       struct drm_file *file_priv)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int ret;
+
+	if (dev_priv->mm.wedged) {
+		DRM_ERROR("Reenabling wedged hardware, good luck\n");
+		dev_priv->mm.wedged = 0;
+	}
+
+	ret = i915_gem_init_ringbuffer(dev);
+	if (ret != 0)
+		return ret;
+
+	mutex_lock(&dev->struct_mutex);
+	BUG_ON(!list_empty(&dev_priv->mm.active_list));
+	BUG_ON(!list_empty(&dev_priv->mm.flushing_list));
+	BUG_ON(!list_empty(&dev_priv->mm.inactive_list));
+	BUG_ON(!list_empty(&dev_priv->mm.request_list));
+	dev_priv->mm.suspended = 0;
+	mutex_unlock(&dev->struct_mutex);
+	return 0;
+}
+
+int
+i915_gem_leavevt_ioctl(struct drm_device *dev, void *data,
+		       struct drm_file *file_priv)
+{
+	int ret;
+
+	mutex_lock(&dev->struct_mutex);
+	ret = i915_gem_idle(dev);
+	if (ret == 0)
+		i915_gem_cleanup_ringbuffer(dev);
+	mutex_unlock(&dev->struct_mutex);
+
+	return 0;
+}
+
+void
+i915_gem_lastclose(struct drm_device *dev)
+{
+	int ret;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+
+	mutex_lock(&dev->struct_mutex);
+
+	if (dev_priv->ring.ring_obj != NULL) {
+		ret = i915_gem_idle(dev);
+		if (ret)
+			DRM_ERROR("failed to idle hardware: %d\n", ret);
+
+		i915_gem_cleanup_ringbuffer(dev);
+	}
+
+	mutex_unlock(&dev->struct_mutex);
+}
+
+void
+i915_gem_load(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+
+	INIT_LIST_HEAD(&dev_priv->mm.active_list);
+	INIT_LIST_HEAD(&dev_priv->mm.flushing_list);
+	INIT_LIST_HEAD(&dev_priv->mm.inactive_list);
+	INIT_LIST_HEAD(&dev_priv->mm.request_list);
+	INIT_DELAYED_WORK(&dev_priv->mm.retire_work,
+			  i915_gem_retire_work_handler);
+	dev_priv->mm.next_gem_seqno = 1;
+
+	i915_gem_detect_bit_6_swizzle(dev);
+}