Merge tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "This is the main pull request for 5.4-rc1 merge window. I don't think
  there is anything outstanding so next week should just be fixes, but
  we'll see if I missed anything. I landed some fixes earlier in the
  week but got delayed writing summary and sending it out, due to a mix
  of sick kid and jetlag!

  There are some fixes pending, but I'd rather get the main merge out of
  the way instead of delaying it longer.

  It's also pretty large in commit count and new amd header file size.
  The largest thing is four new amdgpu products (navi12/14, arcturus and
  renoir APU support).

  Otherwise it's pretty much lots of work across the board, i915 has
  started landing tigerlake support, lots of icelake fixes and lots of
  locking reworking for future gpu support, lots of header file rework
  (drmP.h is nearly gone), some old legacy hacks (DRM_WAIT_ON) have been
  put into the places they are needed.

  uapi:
   - content protection type property for HDCP

  core:
   - rework include dependencies
   - lots of drmP.h removals
   - link rate calculation robustness fix
   - make fb helper map only when required
   - add connector->DDC adapter link
   - DRM_WAIT_ON removed
   - drop DRM_AUTH usage from drivers

  dma-buf:
   - reservation object fence helper

  dma-fence:
   - shrink dma_fence struct
   - merge signal functions
   - store timestamps in dma_fence
   - selftests

  ttm:
   - embed drm_get_object struct into ttm_buffer_object
   - release_notify callback

  bridges:
   - sii902x - audio graph card support
   - tc358767 - aux data handling rework
   - ti-snd64dsi86 - debugfs support, DSI mode flags support

  panels:
   - Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech
     COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191, Boe
     Himax8279d, Sharp LD-D5116Z01B
   - TI nspire, NEC NL8048HL11, LG Philips LB035Q02, Sharp LS037V7DW01,
     Sony ACX565AKM, Toppoly TD028TTEC1 Toppoly TD043MTEA1

  i915:
   - Initial tigerlake platform support
   - Locking simplification work, general all over refactoring.
   - Selftests
   - HDCP debug info improvements
   - DSI properties
   - Icelake display PLL fixes, colorspace fixes, bandwidth fixes, DSI
     suspend/resume
   - GuC fixes
   - Perf fixes
   - ElkhartLake enablement
   - DP MST fixes
   - GVT - command parser enhancements

  amdgpu:
   - add wipe memory on release flag for buffer creation
   - Navi12/14 support (may be marked experimental)
   - Arcturus support
   - Renoir APU support
   - mclk DPM for Navi
   - DC display fixes
   - Raven scatter/gather support
   - RAS support for GFX
   - Navi12 + Arcturus power features
   - GPU reset for Picasso
   - smu11 i2c controller support

  amdkfd:
   - navi12/14 support
   - Arcturus support

  radeon:
   - kexec fix

  nouveau:
   - improved display color management
   - detect lack of GPU power cables

  vmwgfx:
   - evicition priority support
   - remove unused security feature

  msm:
   - msm8998 display support
   - better async commit support for cursor updates

  etnaviv:
   - per-process address space support
   - performance counter fixes
   - softpin support

  mcde:
   - DCS transfers fix

  exynos:
   - drmP.h cleanup

  lima:
   - reduce logging

  kirin:
   - misc clenaups

  komeda:
   - dual-link support
   - DT memory regions

  hisilicon:
   - misc fixes

  imx:
   - IPUv3 image converter fixes
   - 32-bit RGB V4L2 pixel format support

  ingenic:
   - more support for panel related cases

  mgag200:
   - cursor support fix

  panfrost:
   - export GPU features register to userspace
   - gpu heap allocations
   - per-fd address space support

  pl111:
   - CLD pads wiring support removed from DT

  rockchip:
   - rework to use DRM PSR helpers
   - fix bug in VOP_WIN_GET macro
   - DSI DT binding rework

  sun4i:
   - improve support for color encoding and range
   - DDC enabled GPIO

  tinydrm:
   - rework SPI support
   - improve MIPI-DBI support
   - moved to drm/tiny

  vkms:
   - rework CRC tracking

  dw-hdmi:
   - get_eld and i2s improvements

  gm12u320:
   - misc fixes

  meson:
   - global code cleanup
   - vpu feature detect

  omap:
   - alpha/pixel blend mode properties

  rcar-du:
   - misc fixes"

* tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drm: (2112 commits)
  drm/nouveau/bar/gm20b: Avoid BAR1 teardown during init
  drm/nouveau: Fix ordering between TTM and GEM release
  drm/nouveau/prime: Extend DMA reservation object lock
  drm/nouveau: Fix fallout from reservation object rework
  drm/nouveau/kms/nv50-: Don't create MSTMs for eDP connectors
  drm/i915: Use NOEVICT for first pass on attemping to pin a GGTT mmap
  drm/i915: to make vgpu ppgtt notificaiton as atomic operation
  drm/i915: Flush the existing fence before GGTT read/write
  drm/i915: Hold irq-off for the entire fake lock period
  drm/i915/gvt: update RING_START reg of vGPU when the context is submitted to i915
  drm/i915/gvt: update vgpu workload head pointer correctly
  drm/mcde: Fix DSI transfers
  drm/msm: Use the correct dma_sync calls harder
  drm/msm: remove unlikely() from WARN_ON() conditions
  drm/msm/dsi: Fix return value check for clk_get_parent
  drm/msm: add atomic traces
  drm/msm/dpu: async commit support
  drm/msm: async commit support
  drm/msm: split power control from prepare/complete_commit
  drm/msm: add kms->flush_commit()
  ...

1 files changed, 126 insertions, 69 deletions

diff --git a/drivers/gpu/drm/i915/display/intel_combo_phy.c b/drivers/gpu/drm/i915/display/intel_combo_phy.c
index 841708da5a56..44bbc7e74fc3 100644
--- a/drivers/gpu/drm/i915/display/intel_combo_phy.c
+++ b/drivers/gpu/drm/i915/display/intel_combo_phy.c
@@ -4,15 +4,15 @@
  */
 
 #include "intel_combo_phy.h"
-#include "intel_drv.h"
+#include "intel_display_types.h"
 
-#define for_each_combo_port(__dev_priv, __port) \
-	for ((__port) = PORT_A; (__port) < I915_MAX_PORTS; (__port)++)	\
-		for_each_if(intel_port_is_combophy(__dev_priv, __port))
+#define for_each_combo_phy(__dev_priv, __phy) \
+	for ((__phy) = PHY_A; (__phy) < I915_MAX_PHYS; (__phy)++)	\
+		for_each_if(intel_phy_is_combo(__dev_priv, __phy))
 
-#define for_each_combo_port_reverse(__dev_priv, __port) \
-	for ((__port) = I915_MAX_PORTS; (__port)-- > PORT_A;) \
-		for_each_if(intel_port_is_combophy(__dev_priv, __port))
+#define for_each_combo_phy_reverse(__dev_priv, __phy) \
+	for ((__phy) = I915_MAX_PHYS; (__phy)-- > PHY_A;) \
+		for_each_if(intel_phy_is_combo(__dev_priv, __phy))
 
 enum {
 	PROCMON_0_85V_DOT_0,
@@ -38,18 +38,17 @@ static const struct cnl_procmon {
 };
 
 /*
- * CNL has just one set of registers, while ICL has two sets: one for port A and
- * the other for port B. The CNL registers are equivalent to the ICL port A
- * registers, that's why we call the ICL macros even though the function has CNL
- * on its name.
+ * CNL has just one set of registers, while gen11 has a set for each combo PHY.
+ * The CNL registers are equivalent to the gen11 PHY A registers, that's why we
+ * call the ICL macros even though the function has CNL on its name.
  */
 static const struct cnl_procmon *
-cnl_get_procmon_ref_values(struct drm_i915_private *dev_priv, enum port port)
+cnl_get_procmon_ref_values(struct drm_i915_private *dev_priv, enum phy phy)
 {
 	const struct cnl_procmon *procmon;
 	u32 val;
 
-	val = I915_READ(ICL_PORT_COMP_DW3(port));
+	val = I915_READ(ICL_PORT_COMP_DW3(phy));
 	switch (val & (PROCESS_INFO_MASK | VOLTAGE_INFO_MASK)) {
 	default:
 		MISSING_CASE(val);
@@ -75,32 +74,32 @@ cnl_get_procmon_ref_values(struct drm_i915_private *dev_priv, enum port port)
 }
 
 static void cnl_set_procmon_ref_values(struct drm_i915_private *dev_priv,
-				       enum port port)
+				       enum phy phy)
 {
 	const struct cnl_procmon *procmon;
 	u32 val;
 
-	procmon = cnl_get_procmon_ref_values(dev_priv, port);
+	procmon = cnl_get_procmon_ref_values(dev_priv, phy);
 
-	val = I915_READ(ICL_PORT_COMP_DW1(port));
+	val = I915_READ(ICL_PORT_COMP_DW1(phy));
 	val &= ~((0xff << 16) | 0xff);
 	val |= procmon->dw1;
-	I915_WRITE(ICL_PORT_COMP_DW1(port), val);
+	I915_WRITE(ICL_PORT_COMP_DW1(phy), val);
 
-	I915_WRITE(ICL_PORT_COMP_DW9(port), procmon->dw9);
-	I915_WRITE(ICL_PORT_COMP_DW10(port), procmon->dw10);
+	I915_WRITE(ICL_PORT_COMP_DW9(phy), procmon->dw9);
+	I915_WRITE(ICL_PORT_COMP_DW10(phy), procmon->dw10);
 }
 
 static bool check_phy_reg(struct drm_i915_private *dev_priv,
-			  enum port port, i915_reg_t reg, u32 mask,
+			  enum phy phy, i915_reg_t reg, u32 mask,
 			  u32 expected_val)
 {
 	u32 val = I915_READ(reg);
 
 	if ((val & mask) != expected_val) {
-		DRM_DEBUG_DRIVER("Port %c combo PHY reg %08x state mismatch: "
+		DRM_DEBUG_DRIVER("Combo PHY %c reg %08x state mismatch: "
 				 "current %08x mask %08x expected %08x\n",
-				 port_name(port),
+				 phy_name(phy),
 				 reg.reg, val, mask, expected_val);
 		return false;
 	}
@@ -109,18 +108,18 @@ static bool check_phy_reg(struct drm_i915_private *dev_priv,
 }
 
 static bool cnl_verify_procmon_ref_values(struct drm_i915_private *dev_priv,
-					  enum port port)
+					  enum phy phy)
 {
 	const struct cnl_procmon *procmon;
 	bool ret;
 
-	procmon = cnl_get_procmon_ref_values(dev_priv, port);
+	procmon = cnl_get_procmon_ref_values(dev_priv, phy);
 
-	ret = check_phy_reg(dev_priv, port, ICL_PORT_COMP_DW1(port),
+	ret = check_phy_reg(dev_priv, phy, ICL_PORT_COMP_DW1(phy),
 			    (0xff << 16) | 0xff, procmon->dw1);
-	ret &= check_phy_reg(dev_priv, port, ICL_PORT_COMP_DW9(port),
+	ret &= check_phy_reg(dev_priv, phy, ICL_PORT_COMP_DW9(phy),
 			     -1U, procmon->dw9);
-	ret &= check_phy_reg(dev_priv, port, ICL_PORT_COMP_DW10(port),
+	ret &= check_phy_reg(dev_priv, phy, ICL_PORT_COMP_DW10(phy),
 			     -1U, procmon->dw10);
 
 	return ret;
@@ -134,15 +133,15 @@ static bool cnl_combo_phy_enabled(struct drm_i915_private *dev_priv)
 
 static bool cnl_combo_phy_verify_state(struct drm_i915_private *dev_priv)
 {
-	enum port port = PORT_A;
+	enum phy phy = PHY_A;
 	bool ret;
 
 	if (!cnl_combo_phy_enabled(dev_priv))
 		return false;
 
-	ret = cnl_verify_procmon_ref_values(dev_priv, port);
+	ret = cnl_verify_procmon_ref_values(dev_priv, phy);
 
-	ret &= check_phy_reg(dev_priv, port, CNL_PORT_CL1CM_DW5,
+	ret &= check_phy_reg(dev_priv, phy, CNL_PORT_CL1CM_DW5,
 			     CL_POWER_DOWN_ENABLE, CL_POWER_DOWN_ENABLE);
 
 	return ret;
@@ -157,7 +156,7 @@ static void cnl_combo_phys_init(struct drm_i915_private *dev_priv)
 	I915_WRITE(CHICKEN_MISC_2, val);
 
 	/* Dummy PORT_A to get the correct CNL register from the ICL macro */
-	cnl_set_procmon_ref_values(dev_priv, PORT_A);
+	cnl_set_procmon_ref_values(dev_priv, PHY_A);
 
 	val = I915_READ(CNL_PORT_COMP_DW0);
 	val |= COMP_INIT;
@@ -181,35 +180,39 @@ static void cnl_combo_phys_uninit(struct drm_i915_private *dev_priv)
 }
 
 static bool icl_combo_phy_enabled(struct drm_i915_private *dev_priv,
-				  enum port port)
+				  enum phy phy)
 {
-	return !(I915_READ(ICL_PHY_MISC(port)) &
-		 ICL_PHY_MISC_DE_IO_COMP_PWR_DOWN) &&
-		(I915_READ(ICL_PORT_COMP_DW0(port)) & COMP_INIT);
+	/* The PHY C added by EHL has no PHY_MISC register */
+	if (IS_ELKHARTLAKE(dev_priv) && phy == PHY_C)
+		return I915_READ(ICL_PORT_COMP_DW0(phy)) & COMP_INIT;
+	else
+		return !(I915_READ(ICL_PHY_MISC(phy)) &
+			 ICL_PHY_MISC_DE_IO_COMP_PWR_DOWN) &&
+			(I915_READ(ICL_PORT_COMP_DW0(phy)) & COMP_INIT);
 }
 
 static bool icl_combo_phy_verify_state(struct drm_i915_private *dev_priv,
-				       enum port port)
+				       enum phy phy)
 {
 	bool ret;
 
-	if (!icl_combo_phy_enabled(dev_priv, port))
+	if (!icl_combo_phy_enabled(dev_priv, phy))
 		return false;
 
-	ret = cnl_verify_procmon_ref_values(dev_priv, port);
+	ret = cnl_verify_procmon_ref_values(dev_priv, phy);
 
-	if (port == PORT_A)
-		ret &= check_phy_reg(dev_priv, port, ICL_PORT_COMP_DW8(port),
+	if (phy == PHY_A)
+		ret &= check_phy_reg(dev_priv, phy, ICL_PORT_COMP_DW8(phy),
 				     IREFGEN, IREFGEN);
 
-	ret &= check_phy_reg(dev_priv, port, ICL_PORT_CL_DW5(port),
+	ret &= check_phy_reg(dev_priv, phy, ICL_PORT_CL_DW5(phy),
 			     CL_POWER_DOWN_ENABLE, CL_POWER_DOWN_ENABLE);
 
 	return ret;
 }
 
 void intel_combo_phy_power_up_lanes(struct drm_i915_private *dev_priv,
-				    enum port port, bool is_dsi,
+				    enum phy phy, bool is_dsi,
 				    int lane_count, bool lane_reversal)
 {
 	u8 lane_mask;
@@ -254,66 +257,120 @@ void intel_combo_phy_power_up_lanes(struct drm_i915_private *dev_priv,
 		}
 	}
 
-	val = I915_READ(ICL_PORT_CL_DW10(port));
+	val = I915_READ(ICL_PORT_CL_DW10(phy));
 	val &= ~PWR_DOWN_LN_MASK;
 	val |= lane_mask << PWR_DOWN_LN_SHIFT;
-	I915_WRITE(ICL_PORT_CL_DW10(port), val);
+	I915_WRITE(ICL_PORT_CL_DW10(phy), val);
+}
+
+static u32 ehl_combo_phy_a_mux(struct drm_i915_private *i915, u32 val)
+{
+	bool ddi_a_present = i915->vbt.ddi_port_info[PORT_A].child != NULL;
+	bool ddi_d_present = i915->vbt.ddi_port_info[PORT_D].child != NULL;
+	bool dsi_present = intel_bios_is_dsi_present(i915, NULL);
+
+	/*
+	 * VBT's 'dvo port' field for child devices references the DDI, not
+	 * the PHY.  So if combo PHY A is wired up to drive an external
+	 * display, we should see a child device present on PORT_D and
+	 * nothing on PORT_A and no DSI.
+	 */
+	if (ddi_d_present && !ddi_a_present && !dsi_present)
+		return val | ICL_PHY_MISC_MUX_DDID;
+
+	/*
+	 * If we encounter a VBT that claims to have an external display on
+	 * DDI-D _and_ an internal display on DDI-A/DSI leave an error message
+	 * in the log and let the internal display win.
+	 */
+	if (ddi_d_present)
+		DRM_ERROR("VBT claims to have both internal and external displays on PHY A.  Configuring for internal.\n");
+
+	return val & ~ICL_PHY_MISC_MUX_DDID;
 }
 
 static void icl_combo_phys_init(struct drm_i915_private *dev_priv)
 {
-	enum port port;
+	enum phy phy;
 
-	for_each_combo_port(dev_priv, port) {
+	for_each_combo_phy(dev_priv, phy) {
 		u32 val;
 
-		if (icl_combo_phy_verify_state(dev_priv, port)) {
-			DRM_DEBUG_DRIVER("Port %c combo PHY already enabled, won't reprogram it.\n",
-					 port_name(port));
+		if (icl_combo_phy_verify_state(dev_priv, phy)) {
+			DRM_DEBUG_DRIVER("Combo PHY %c already enabled, won't reprogram it.\n",
+					 phy_name(phy));
 			continue;
 		}
 
-		val = I915_READ(ICL_PHY_MISC(port));
+		/*
+		 * Although EHL adds a combo PHY C, there's no PHY_MISC
+		 * register for it and no need to program the
+		 * DE_IO_COMP_PWR_DOWN setting on PHY C.
+		 */
+		if (IS_ELKHARTLAKE(dev_priv) && phy == PHY_C)
+			goto skip_phy_misc;
+
+		/*
+		 * EHL's combo PHY A can be hooked up to either an external
+		 * display (via DDI-D) or an internal display (via DDI-A or
+		 * the DSI DPHY).  This is a motherboard design decision that
+		 * can't be changed on the fly, so initialize the PHY's mux
+		 * based on whether our VBT indicates the presence of any
+		 * "internal" child devices.
+		 */
+		val = I915_READ(ICL_PHY_MISC(phy));
+		if (IS_ELKHARTLAKE(dev_priv) && phy == PHY_A)
+			val = ehl_combo_phy_a_mux(dev_priv, val);
 		val &= ~ICL_PHY_MISC_DE_IO_COMP_PWR_DOWN;
-		I915_WRITE(ICL_PHY_MISC(port), val);
+		I915_WRITE(ICL_PHY_MISC(phy), val);
 
-		cnl_set_procmon_ref_values(dev_priv, port);
+skip_phy_misc:
+		cnl_set_procmon_ref_values(dev_priv, phy);
 
-		if (port == PORT_A) {
-			val = I915_READ(ICL_PORT_COMP_DW8(port));
+		if (phy == PHY_A) {
+			val = I915_READ(ICL_PORT_COMP_DW8(phy));
 			val |= IREFGEN;
-			I915_WRITE(ICL_PORT_COMP_DW8(port), val);
+			I915_WRITE(ICL_PORT_COMP_DW8(phy), val);
 		}
 
-		val = I915_READ(ICL_PORT_COMP_DW0(port));
+		val = I915_READ(ICL_PORT_COMP_DW0(phy));
 		val |= COMP_INIT;
-		I915_WRITE(ICL_PORT_COMP_DW0(port), val);
+		I915_WRITE(ICL_PORT_COMP_DW0(phy), val);
 
-		val = I915_READ(ICL_PORT_CL_DW5(port));
+		val = I915_READ(ICL_PORT_CL_DW5(phy));
 		val |= CL_POWER_DOWN_ENABLE;
-		I915_WRITE(ICL_PORT_CL_DW5(port), val);
+		I915_WRITE(ICL_PORT_CL_DW5(phy), val);
 	}
 }
 
 static void icl_combo_phys_uninit(struct drm_i915_private *dev_priv)
 {
-	enum port port;
+	enum phy phy;
 
-	for_each_combo_port_reverse(dev_priv, port) {
+	for_each_combo_phy_reverse(dev_priv, phy) {
 		u32 val;
 
-		if (port == PORT_A &&
-		    !icl_combo_phy_verify_state(dev_priv, port))
-			DRM_WARN("Port %c combo PHY HW state changed unexpectedly\n",
-				 port_name(port));
+		if (phy == PHY_A &&
+		    !icl_combo_phy_verify_state(dev_priv, phy))
+			DRM_WARN("Combo PHY %c HW state changed unexpectedly\n",
+				 phy_name(phy));
+
+		/*
+		 * Although EHL adds a combo PHY C, there's no PHY_MISC
+		 * register for it and no need to program the
+		 * DE_IO_COMP_PWR_DOWN setting on PHY C.
+		 */
+		if (IS_ELKHARTLAKE(dev_priv) && phy == PHY_C)
+			goto skip_phy_misc;
 
-		val = I915_READ(ICL_PHY_MISC(port));
+		val = I915_READ(ICL_PHY_MISC(phy));
 		val |= ICL_PHY_MISC_DE_IO_COMP_PWR_DOWN;
-		I915_WRITE(ICL_PHY_MISC(port), val);
+		I915_WRITE(ICL_PHY_MISC(phy), val);
 
-		val = I915_READ(ICL_PORT_COMP_DW0(port));
+skip_phy_misc:
+		val = I915_READ(ICL_PORT_COMP_DW0(phy));
 		val &= ~COMP_INIT;
-		I915_WRITE(ICL_PORT_COMP_DW0(port), val);
+		I915_WRITE(ICL_PORT_COMP_DW0(phy), val);
 	}
 }