Merge tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Davbe Airlie:
 "This is the main pull request for graphics for 5.6. Usual selection of
  changes all over.

  I've got one outstanding vmwgfx pull that touches mm so kept it
  separate until after all of this lands. I'll try and get it to you
  soon after this, but it might be early next week (nothing wrong with
  code, just my schedule is messy)

  This also hits a lot of fbdev drivers with some cleanups.

  Other notables:
   - vulkan timeline semaphore support added to syncobjs
   - nouveau turing secureboot/graphics support
   - Displayport MST display stream compression support

  Detailed summary:

  uapi:
   - dma-buf heaps added (and fixed)
   - command line add support for panel oreientation
   - command line allow overriding penguin count

  drm:
   - mipi dsi definition updates
   - lockdep annotations for dma_resv
   - remove dma-buf kmap/kunmap support
   - constify fb_ops in all fbdev drivers
   - MST fix for daisy chained hotplug-
   - CTA-861-G modes with VIC >= 193 added
   - fix drm_panel_of_backlight export
   - LVDS decoder support
   - more device based logging support
   - scanline alighment for dumb buffers
   - MST DSC helpers

  scheduler:
   - documentation fixes
   - job distribution improvements

  panel:
   - Logic PD type 28 panel support
   - Jimax8729d MIPI-DSI
   - igenic JZ4770
   - generic DSI devicetree bindings
   - sony acx424AKP panel
   - Leadtek LTK500HD1829
   - xinpeng XPP055C272
   - AUO B116XAK01
   - GiantPlus GPM940B0
   - BOE NV140FHM-N49
   - Satoz SAT050AT40H12R2
   - Sharp LS020B1DD01D panels.

  ttm:
   - use blocking WW lock

  i915:
   - hw/uapi state separation
   - Lock annotation improvements
   - selftest improvements
   - ICL/TGL DSI VDSC support
   - VBT parsing improvments
   - Display refactoring
   - DSI updates + fixes
   - HDCP 2.2 for CFL
   - CML PCI ID fixes
   - GLK+ fbc fix
   - PSR fixes
   - GEN/GT refactor improvments
   - DP MST fixes
   - switch context id alloc to xarray
   - workaround updates
   - LMEM debugfs support
   - tiled monitor fixes
   - ICL+ clock gating programming removed
   - DP MST disable sequence fixed
   - LMEM discontiguous object maps
   - prefaulting for discontiguous objects
   - use LMEM for dumb buffers if possible
   - add LMEM mmap support

  amdgpu:
   - enable sync object timelines for vulkan
   - MST atomic routines
   - enable MST DSC support
   - add DMCUB display microengine support
   - DC OEM i2c support
   - Renoir DC fixes
   - Initial HDCP 2.x support
   - BACO support for Arcturus
   - Use BACO for runtime PM power save
   - gfxoff on navi10
   - gfx10 golden updates and fixes
   - DCN support on POWER
   - GFXOFF for raven1 refresh
   - MM engine idle handlers cleanup
   - 10bpc EDP panel fixes
   - renoir watermark fixes
   - SR-IOV fixes
   - Arcturus VCN fixes
   - GDDR6 training fixes
   - freesync fixes
   - Pollock support

  amdkfd:
   - unify more codepath with amdgpu
   - use KIQ to setup HIQ rather than MMIO

  radeon:
   - fix vma fault handler race
   - PPC DMA fix
   - register check fixes for r100/r200

  nouveau:
   - mmap_sem vs dma_resv fix
   - rewrite the ACR secure boot code for Turing
   - TU10x graphics engine support (TU11x pending)
   - Page kind mapping for turing
   - 10-bit LUT support
   - GP10B Tegra fixes
   - HD audio regression fix

  hisilicon/hibmc:
   - use generic fbdev code and helpers

  rockchip:
   - dsi/px30 support

  virtio:
   - fb damage support
   - static some functions

  vc4:
   - use dma_resv lock wrappers

  msm:
   - use dma_resv lock wrappers
   - sc7180 display + DSI support
   - a618 support
   - UBWC support improvements

  vmwgfx:
   - updates + new logging uapi

  exynos:
   - enable/disable callback cleanups

  etnaviv:
   - use dma_resv lock wrappers

  atmel-hlcdc:
   - clock fixes

  mediatek:
   - cmdq support
   - non-smooth cursor fixes
   - ctm property support

  sun4i:
   - suspend support
   - A64 mipi dsi support

  rcar-du:
   - Color management module support
   - LVDS encoder dual-link support
   - R8A77980 support

  analogic:
   - add support for an6345

  ast:
   - atomic modeset support
   - primary plane garbage fix

  arcgpu:
   - fixes for fourcc handling

  tegra:
   - minor fixes and improvments

  mcde:
   - vblank support

  meson:
   - OSD1 plane AFBC commit

  gma500:
   - add pageflip support
   - reomve global drm_dev

  komeda:
   - tweak debugfs output
   - d32 support
   - runtime PM suppotr

  udl:
   - use generic shmem helpers
   - cleanup and fixes"

* tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm: (1998 commits)
  drm/nouveau/fb/gp102-: allow module to load even when scrubber binary is missing
  drm/nouveau/acr: return error when registering LSF if ACR not supported
  drm/nouveau/disp/gv100-: not all channel types support reporting error codes
  drm/nouveau/disp/nv50-: prevent oops when no channel method map provided
  drm/nouveau: support synchronous pushbuf submission
  drm/nouveau: signal pending fences when channel has been killed
  drm/nouveau: reject attempts to submit to dead channels
  drm/nouveau: zero vma pointer even if we only unreference it rather than free
  drm/nouveau: Add HD-audio component notifier support
  drm/nouveau: fix build error without CONFIG_IOMMU_API
  drm/nouveau/kms/nv04: remove set but not used variable 'width'
  drm/nouveau/kms/nv50: remove set but not unused variable 'nv_connector'
  drm/nouveau/mmu: fix comptag memory leak
  drm/nouveau/gr/gp10b: Use gp100_grctx and gp100_gr_zbc
  drm/nouveau/pmu/gm20b,gp10b: Fix Falcon bootstrapping
  drm/exynos: Rename Exynos to lowercase
  drm/exynos: change callback names
  drm/mst: Don't do atomic checks over disabled managers
  drm/amdgpu: add the lost mutex_init back
  drm/amd/display: skip opp blank or unblank if test pattern enabled
  ...

1 files changed, 506 insertions, 0 deletions

diff --git a/drivers/gpu/drm/amd/display/dmub/inc/dmub_srv.h b/drivers/gpu/drm/amd/display/dmub/inc/dmub_srv.h
new file mode 100644
index 000000000000..8e23a7017588
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/dmub/inc/dmub_srv.h
@@ -0,0 +1,506 @@
+/*
+ * Copyright 2019 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#ifndef _DMUB_SRV_H_
+#define _DMUB_SRV_H_
+
+/**
+ * DOC: DMUB interface and operation
+ *
+ * DMUB is the interface to the display DMCUB microcontroller on DCN hardware.
+ * It delegates hardware initialization and command submission to the
+ * microcontroller. DMUB is the shortname for DMCUB.
+ *
+ * This interface is not thread-safe. Ensure that all access to the interface
+ * is properly synchronized by the caller.
+ *
+ * Initialization and usage of the DMUB service should be done in the
+ * steps given below:
+ *
+ * 1. dmub_srv_create()
+ * 2. dmub_srv_has_hw_support()
+ * 3. dmub_srv_calc_region_info()
+ * 4. dmub_srv_hw_init()
+ *
+ * The call to dmub_srv_create() is required to use the server.
+ *
+ * The calls to dmub_srv_has_hw_support() and dmub_srv_calc_region_info()
+ * are helpers to query cache window size and allocate framebuffer(s)
+ * for the cache windows.
+ *
+ * The call to dmub_srv_hw_init() programs the DMCUB registers to prepare
+ * for command submission. Commands can be queued via dmub_srv_cmd_queue()
+ * and executed via dmub_srv_cmd_execute().
+ *
+ * If the queue is full the dmub_srv_wait_for_idle() call can be used to
+ * wait until the queue has been cleared.
+ *
+ * Destroying the DMUB service can be done by calling dmub_srv_destroy().
+ * This does not clear DMUB hardware state, only software state.
+ *
+ * The interface is intended to be standalone and should not depend on any
+ * other component within DAL.
+ */
+
+#include "dmub_types.h"
+#include "dmub_cmd.h"
+#include "dmub_rb.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/* Forward declarations */
+struct dmub_srv;
+struct dmub_cmd_header;
+struct dmub_srv_common_regs;
+
+/* enum dmub_status - return code for dmcub functions */
+enum dmub_status {
+	DMUB_STATUS_OK = 0,
+	DMUB_STATUS_NO_CTX,
+	DMUB_STATUS_QUEUE_FULL,
+	DMUB_STATUS_TIMEOUT,
+	DMUB_STATUS_INVALID,
+};
+
+/* enum dmub_asic - dmub asic identifier */
+enum dmub_asic {
+	DMUB_ASIC_NONE = 0,
+	DMUB_ASIC_DCN20,
+	DMUB_ASIC_DCN21,
+	DMUB_ASIC_MAX,
+};
+
+/* enum dmub_window_id - dmub window identifier */
+enum dmub_window_id {
+	DMUB_WINDOW_0_INST_CONST = 0,
+	DMUB_WINDOW_1_STACK,
+	DMUB_WINDOW_2_BSS_DATA,
+	DMUB_WINDOW_3_VBIOS,
+	DMUB_WINDOW_4_MAILBOX,
+	DMUB_WINDOW_5_TRACEBUFF,
+	DMUB_WINDOW_6_FW_STATE,
+	DMUB_WINDOW_7_RESERVED,
+	DMUB_WINDOW_TOTAL,
+};
+
+/**
+ * struct dmub_region - dmub hw memory region
+ * @base: base address for region, must be 256 byte aligned
+ * @top: top address for region
+ */
+struct dmub_region {
+	uint32_t base;
+	uint32_t top;
+};
+
+/**
+ * struct dmub_window - dmub hw cache window
+ * @off: offset to the fb memory in gpu address space
+ * @r: region in uc address space for cache window
+ */
+struct dmub_window {
+	union dmub_addr offset;
+	struct dmub_region region;
+};
+
+/**
+ * struct dmub_fb - defines a dmub framebuffer memory region
+ * @cpu_addr: cpu virtual address for the region, NULL if invalid
+ * @gpu_addr: gpu virtual address for the region, NULL if invalid
+ * @size: size of the region in bytes, zero if invalid
+ */
+struct dmub_fb {
+	void *cpu_addr;
+	uint64_t gpu_addr;
+	uint32_t size;
+};
+
+/**
+ * struct dmub_srv_region_params - params used for calculating dmub regions
+ * @inst_const_size: size of the fw inst const section
+ * @bss_data_size: size of the fw bss data section
+ * @vbios_size: size of the vbios data
+ * @fw_bss_data: raw firmware bss data section
+ */
+struct dmub_srv_region_params {
+	uint32_t inst_const_size;
+	uint32_t bss_data_size;
+	uint32_t vbios_size;
+	const uint8_t *fw_bss_data;
+};
+
+/**
+ * struct dmub_srv_region_info - output region info from the dmub service
+ * @fb_size: required minimum fb size for all regions, aligned to 4096 bytes
+ * @num_regions: number of regions used by the dmub service
+ * @regions: region info
+ *
+ * The regions are aligned such that they can be all placed within the
+ * same framebuffer but they can also be placed into different framebuffers.
+ *
+ * The size of each region can be calculated by the caller:
+ * size = reg.top - reg.base
+ *
+ * Care must be taken when performing custom allocations to ensure that each
+ * region base address is 256 byte aligned.
+ */
+struct dmub_srv_region_info {
+	uint32_t fb_size;
+	uint8_t num_regions;
+	struct dmub_region regions[DMUB_WINDOW_TOTAL];
+};
+
+/**
+ * struct dmub_srv_fb_params - parameters used for driver fb setup
+ * @region_info: region info calculated by dmub service
+ * @cpu_addr: base cpu address for the framebuffer
+ * @gpu_addr: base gpu virtual address for the framebuffer
+ */
+struct dmub_srv_fb_params {
+	const struct dmub_srv_region_info *region_info;
+	void *cpu_addr;
+	uint64_t gpu_addr;
+};
+
+/**
+ * struct dmub_srv_fb_info - output fb info from the dmub service
+ * @num_fbs: number of required dmub framebuffers
+ * @fbs: fb data for each region
+ *
+ * Output from the dmub service helper that can be used by the
+ * driver to prepare dmub_fb that can be passed into the dmub
+ * hw init service.
+ *
+ * Assumes that all regions are within the same framebuffer
+ * and have been setup according to the region_info generated
+ * by the dmub service.
+ */
+struct dmub_srv_fb_info {
+	uint8_t num_fb;
+	struct dmub_fb fb[DMUB_WINDOW_TOTAL];
+};
+
+/**
+ * struct dmub_srv_base_funcs - Driver specific base callbacks
+ */
+struct dmub_srv_base_funcs {
+	/**
+	 * @reg_read:
+	 *
+	 * Hook for reading a register.
+	 *
+	 * Return: The 32-bit register value from the given address.
+	 */
+	uint32_t (*reg_read)(void *ctx, uint32_t address);
+
+	/**
+	 * @reg_write:
+	 *
+	 * Hook for writing a value to the register specified by address.
+	 */
+	void (*reg_write)(void *ctx, uint32_t address, uint32_t value);
+};
+
+/**
+ * struct dmub_srv_hw_funcs - hardware sequencer funcs for dmub
+ */
+struct dmub_srv_hw_funcs {
+	/* private: internal use only */
+
+	void (*reset)(struct dmub_srv *dmub);
+
+	void (*reset_release)(struct dmub_srv *dmub);
+
+	void (*backdoor_load)(struct dmub_srv *dmub,
+			      const struct dmub_window *cw0,
+			      const struct dmub_window *cw1);
+
+	void (*setup_windows)(struct dmub_srv *dmub,
+			      const struct dmub_window *cw2,
+			      const struct dmub_window *cw3,
+			      const struct dmub_window *cw4,
+			      const struct dmub_window *cw5,
+			      const struct dmub_window *cw6);
+
+	void (*setup_mailbox)(struct dmub_srv *dmub,
+			      const struct dmub_region *inbox1);
+
+	uint32_t (*get_inbox1_rptr)(struct dmub_srv *dmub);
+
+	void (*set_inbox1_wptr)(struct dmub_srv *dmub, uint32_t wptr_offset);
+
+	bool (*is_supported)(struct dmub_srv *dmub);
+
+	bool (*is_hw_init)(struct dmub_srv *dmub);
+
+	bool (*is_phy_init)(struct dmub_srv *dmub);
+
+	bool (*is_auto_load_done)(struct dmub_srv *dmub);
+};
+
+/**
+ * struct dmub_srv_create_params - params for dmub service creation
+ * @base_funcs: driver supplied base routines
+ * @hw_funcs: optional overrides for hw funcs
+ * @user_ctx: context data for callback funcs
+ * @asic: driver supplied asic
+ * @is_virtual: false for hw support only
+ */
+struct dmub_srv_create_params {
+	struct dmub_srv_base_funcs funcs;
+	struct dmub_srv_hw_funcs *hw_funcs;
+	void *user_ctx;
+	enum dmub_asic asic;
+	bool is_virtual;
+};
+
+/*
+ * struct dmub_srv_hw_params - params for dmub hardware initialization
+ * @fb: framebuffer info for each region
+ * @fb_base: base of the framebuffer aperture
+ * @fb_offset: offset of the framebuffer aperture
+ * @psp_version: psp version to pass for DMCU init
+ * @load_inst_const: true if DMUB should load inst const fw
+ */
+struct dmub_srv_hw_params {
+	struct dmub_fb *fb[DMUB_WINDOW_TOTAL];
+	uint64_t fb_base;
+	uint64_t fb_offset;
+	uint32_t psp_version;
+	bool load_inst_const;
+};
+
+/**
+ * struct dmub_srv - software state for dmcub
+ * @asic: dmub asic identifier
+ * @user_ctx: user provided context for the dmub_srv
+ * @is_virtual: false if hardware support only
+ * @fw_state: dmub firmware state pointer
+ */
+struct dmub_srv {
+	enum dmub_asic asic;
+	void *user_ctx;
+	bool is_virtual;
+	volatile const struct dmub_fw_state *fw_state;
+
+	/* private: internal use only */
+	const struct dmub_srv_common_regs *regs;
+
+	struct dmub_srv_base_funcs funcs;
+	struct dmub_srv_hw_funcs hw_funcs;
+	struct dmub_rb inbox1_rb;
+
+	bool sw_init;
+	bool hw_init;
+
+	uint64_t fb_base;
+	uint64_t fb_offset;
+	uint32_t psp_version;
+};
+
+/**
+ * dmub_srv_create() - creates the DMUB service.
+ * @dmub: the dmub service
+ * @params: creation parameters for the service
+ *
+ * Return:
+ *   DMUB_STATUS_OK - success
+ *   DMUB_STATUS_INVALID - unspecified error
+ */
+enum dmub_status dmub_srv_create(struct dmub_srv *dmub,
+				 const struct dmub_srv_create_params *params);
+
+/**
+ * dmub_srv_destroy() - destroys the DMUB service.
+ * @dmub: the dmub service
+ */
+void dmub_srv_destroy(struct dmub_srv *dmub);
+
+/**
+ * dmub_srv_calc_region_info() - retreives region info from the dmub service
+ * @dmub: the dmub service
+ * @params: parameters used to calculate region locations
+ * @info_out: the output region info from dmub
+ *
+ * Calculates the base and top address for all relevant dmub regions
+ * using the parameters given (if any).
+ *
+ * Return:
+ *   DMUB_STATUS_OK - success
+ *   DMUB_STATUS_INVALID - unspecified error
+ */
+enum dmub_status
+dmub_srv_calc_region_info(struct dmub_srv *dmub,
+			  const struct dmub_srv_region_params *params,
+			  struct dmub_srv_region_info *out);
+
+/**
+ * dmub_srv_calc_region_info() - retreives fb info from the dmub service
+ * @dmub: the dmub service
+ * @params: parameters used to calculate fb locations
+ * @info_out: the output fb info from dmub
+ *
+ * Calculates the base and top address for all relevant dmub regions
+ * using the parameters given (if any).
+ *
+ * Return:
+ *   DMUB_STATUS_OK - success
+ *   DMUB_STATUS_INVALID - unspecified error
+ */
+enum dmub_status dmub_srv_calc_fb_info(struct dmub_srv *dmub,
+				       const struct dmub_srv_fb_params *params,
+				       struct dmub_srv_fb_info *out);
+
+/**
+ * dmub_srv_has_hw_support() - returns hw support state for dmcub
+ * @dmub: the dmub service
+ * @is_supported: hw support state
+ *
+ * Queries the hardware for DMCUB support and returns the result.
+ *
+ * Can be called before dmub_srv_hw_init().
+ *
+ * Return:
+ *   DMUB_STATUS_OK - success
+ *   DMUB_STATUS_INVALID - unspecified error
+ */
+enum dmub_status dmub_srv_has_hw_support(struct dmub_srv *dmub,
+					 bool *is_supported);
+
+/**
+ * dmub_srv_is_hw_init() - returns hardware init state
+ *
+ * Return:
+ *   DMUB_STATUS_OK - success
+ *   DMUB_STATUS_INVALID - unspecified error
+ */
+enum dmub_status dmub_srv_is_hw_init(struct dmub_srv *dmub, bool *is_hw_init);
+
+/**
+ * dmub_srv_hw_init() - initializes the underlying DMUB hardware
+ * @dmub: the dmub service
+ * @params: params for hardware initialization
+ *
+ * Resets the DMUB hardware and performs backdoor loading of the
+ * required cache regions based on the input framebuffer regions.
+ *
+ * Return:
+ *   DMUB_STATUS_OK - success
+ *   DMUB_STATUS_NO_CTX - dmcub context not initialized
+ *   DMUB_STATUS_INVALID - unspecified error
+ */
+enum dmub_status dmub_srv_hw_init(struct dmub_srv *dmub,
+				  const struct dmub_srv_hw_params *params);
+
+/**
+ * dmub_srv_cmd_queue() - queues a command to the DMUB
+ * @dmub: the dmub service
+ * @cmd: the command to queue
+ *
+ * Queues a command to the DMUB service but does not begin execution
+ * immediately.
+ *
+ * Return:
+ *   DMUB_STATUS_OK - success
+ *   DMUB_STATUS_QUEUE_FULL - no remaining room in queue
+ *   DMUB_STATUS_INVALID - unspecified error
+ */
+enum dmub_status dmub_srv_cmd_queue(struct dmub_srv *dmub,
+				    const struct dmub_cmd_header *cmd);
+
+/**
+ * dmub_srv_cmd_execute() - Executes a queued sequence to the dmub
+ * @dmub: the dmub service
+ *
+ * Begins execution of queued commands on the dmub.
+ *
+ * Return:
+ *   DMUB_STATUS_OK - success
+ *   DMUB_STATUS_INVALID - unspecified error
+ */
+enum dmub_status dmub_srv_cmd_execute(struct dmub_srv *dmub);
+
+/**
+ * dmub_srv_wait_for_auto_load() - Waits for firmware auto load to complete
+ * @dmub: the dmub service
+ * @timeout_us: the maximum number of microseconds to wait
+ *
+ * Waits until firmware has been autoloaded by the DMCUB. The maximum
+ * wait time is given in microseconds to prevent spinning forever.
+ *
+ * On ASICs without firmware autoload support this function will return
+ * immediately.
+ *
+ * Return:
+ *   DMUB_STATUS_OK - success
+ *   DMUB_STATUS_TIMEOUT - wait for phy init timed out
+ *   DMUB_STATUS_INVALID - unspecified error
+ */
+enum dmub_status dmub_srv_wait_for_auto_load(struct dmub_srv *dmub,
+					     uint32_t timeout_us);
+
+/**
+ * dmub_srv_wait_for_phy_init() - Waits for DMUB PHY init to complete
+ * @dmub: the dmub service
+ * @timeout_us: the maximum number of microseconds to wait
+ *
+ * Waits until the PHY has been initialized by the DMUB. The maximum
+ * wait time is given in microseconds to prevent spinning forever.
+ *
+ * On ASICs without PHY init support this function will return
+ * immediately.
+ *
+ * Return:
+ *   DMUB_STATUS_OK - success
+ *   DMUB_STATUS_TIMEOUT - wait for phy init timed out
+ *   DMUB_STATUS_INVALID - unspecified error
+ */
+enum dmub_status dmub_srv_wait_for_phy_init(struct dmub_srv *dmub,
+					    uint32_t timeout_us);
+
+/**
+ * dmub_srv_wait_for_idle() - Waits for the DMUB to be idle
+ * @dmub: the dmub service
+ * @timeout_us: the maximum number of microseconds to wait
+ *
+ * Waits until the DMUB buffer is empty and all commands have
+ * finished processing. The maximum wait time is given in
+ * microseconds to prevent spinning forever.
+ *
+ * Return:
+ *   DMUB_STATUS_OK - success
+ *   DMUB_STATUS_TIMEOUT - wait for buffer to flush timed out
+ *   DMUB_STATUS_INVALID - unspecified error
+ */
+enum dmub_status dmub_srv_wait_for_idle(struct dmub_srv *dmub,
+					uint32_t timeout_us);
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* _DMUB_SRV_H_ */