diff options
| author | Mika Westerberg <mika.westerberg@linux.intel.com> | 2017-01-23 15:34:34 +0300 |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2017-01-26 15:27:37 +0100 |
| commit | 2956b5d94a76b596fa5057c2b3ca915cb27d7652 (patch) | |
| tree | 3a1dbce1201ef4923a4124f63eb209026e8fba7e /drivers/gpio/gpio-wm8994.c | |
| parent | 15381bc7c7f52d56f87c56dd7c948ad78704b852 (diff) | |
| download | blackbird-op-linux-2956b5d94a76b596fa5057c2b3ca915cb27d7652.tar.gz blackbird-op-linux-2956b5d94a76b596fa5057c2b3ca915cb27d7652.zip | |
pinctrl / gpio: Introduce .set_config() callback for GPIO chips
Currently we already have two pin configuration related callbacks
available for GPIO chips .set_single_ended() and .set_debounce(). In
future we expect to have even more, which does not scale well if we need
to add yet another callback to the GPIO chip structure for each possible
configuration parameter.
Better solution is to reuse what we already have available in the
generic pinconf.
To support this, we introduce a new .set_config() callback for GPIO
chips. The callback takes a single packed pin configuration value as
parameter. This can then be extended easily beyond what is currently
supported by just adding new types to the generic pinconf enum.
If the GPIO driver is backed up by a pinctrl driver the GPIO driver can
just assign gpiochip_generic_config() (introduced in this patch) to
.set_config and that will take care configuration requests are directed
to the pinctrl driver.
We then convert the existing drivers over .set_config() and finally
remove the .set_single_ended() and .set_debounce() callbacks.
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers/gpio/gpio-wm8994.c')
| -rw-r--r-- | drivers/gpio/gpio-wm8994.c | 13 |
1 files changed, 6 insertions, 7 deletions
diff --git a/drivers/gpio/gpio-wm8994.c b/drivers/gpio/gpio-wm8994.c index 68410fda6138..1e35756ac55b 100644 --- a/drivers/gpio/gpio-wm8994.c +++ b/drivers/gpio/gpio-wm8994.c @@ -103,19 +103,18 @@ static void wm8994_gpio_set(struct gpio_chip *chip, unsigned offset, int value) wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset, WM8994_GPN_LVL, value); } -static int wm8994_gpio_set_single_ended(struct gpio_chip *chip, - unsigned int offset, - enum single_ended_mode mode) +static int wm8994_gpio_set_config(struct gpio_chip *chip, unsigned int offset, + unsigned long config) { struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip); struct wm8994 *wm8994 = wm8994_gpio->wm8994; - switch (mode) { - case LINE_MODE_OPEN_DRAIN: + switch (pinconf_to_config_param(config)) { + case PIN_CONFIG_DRIVE_OPEN_DRAIN: return wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset, WM8994_GPN_OP_CFG_MASK, WM8994_GPN_OP_CFG); - case LINE_MODE_PUSH_PULL: + case PIN_CONFIG_DRIVE_PUSH_PULL: return wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset, WM8994_GPN_OP_CFG_MASK, 0); default: @@ -257,7 +256,7 @@ static const struct gpio_chip template_chip = { .get = wm8994_gpio_get, .direction_output = wm8994_gpio_direction_out, .set = wm8994_gpio_set, - .set_single_ended = wm8994_gpio_set_single_ended, + .set_config = wm8994_gpio_set_config, .to_irq = wm8994_gpio_to_irq, .dbg_show = wm8994_gpio_dbg_show, .can_sleep = true, |
