diff options
| author | Andreas Werner <andy@wernerandy.de> | 2016-02-29 19:44:43 +0100 |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2016-03-09 09:44:52 +0700 |
| commit | f436bc2726c6451bd15b63f100f00dcee52ba103 (patch) | |
| tree | 01d5d6e7afa3f10de582c258546630d6c48c6e24 /drivers/gpio/Kconfig | |
| parent | 3fab91ea284a3b795327dda915a3c150a49e4be2 (diff) | |
| download | blackbird-op-linux-f436bc2726c6451bd15b63f100f00dcee52ba103.tar.gz blackbird-op-linux-f436bc2726c6451bd15b63f100f00dcee52ba103.zip | |
gpio: add driver for MEN 16Z127 GPIO controller
The 16Z127 is a 32bit GPIO controller on a MCB FPGA.
Every single line can be configured as input and output.
Push pull and open drain are supported as well as setting
a debounce value for the input lines.
Signed-off-by: Andreas Werner <andy@wernerandy.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers/gpio/Kconfig')
| -rw-r--r-- | drivers/gpio/Kconfig | 7 |
1 files changed, 7 insertions, 0 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 366656111d22..8de7f05209a7 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -270,6 +270,13 @@ config GPIO_MB86S7X help Say yes here to support the GPIO controller in Fujitsu MB86S70 SoCs. +config GPIO_MENZ127 + tristate "MEN 16Z127 GPIO support" + depends on MCB + select GPIO_GENERIC + help + Say yes here to support the MEN 16Z127 GPIO Controller + config GPIO_MM_LANTIQ bool "Lantiq Memory mapped GPIOs" depends on LANTIQ && SOC_XWAY |
