summaryrefslogtreecommitdiffstats
path: root/drivers/cpufreq
diff options
context:
space:
mode:
authorShawn Guo <shawn.guo@linaro.org>2012-09-06 07:09:11 +0000
committerRafael J. Wysocki <rjw@sisk.pl>2012-09-09 22:06:34 +0200
commit95ceafd46359dfd901f9d3b881b33d3036e4b0ce (patch)
treedc744c4641640513558c18f411241f6abd8a1b8b /drivers/cpufreq
parentb496dfbc94ab86f970ef0167eaabe51f930aa5fb (diff)
downloadblackbird-op-linux-95ceafd46359dfd901f9d3b881b33d3036e4b0ce.tar.gz
blackbird-op-linux-95ceafd46359dfd901f9d3b881b33d3036e4b0ce.zip
cpufreq: Add a generic cpufreq-cpu0 driver
It adds a generic cpufreq driver for CPU0 frequency management based on clk, regulator, OPP and device tree support. It can support both uniprocessor (UP) and those symmetric multiprocessor (SMP) systems which share clock and voltage across all CPUs. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Diffstat (limited to 'drivers/cpufreq')
-rw-r--r--drivers/cpufreq/Kconfig11
-rw-r--r--drivers/cpufreq/Makefile2
-rw-r--r--drivers/cpufreq/cpufreq-cpu0.c269
3 files changed, 282 insertions, 0 deletions
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index e24a2a1b6666..ea512f47b789 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -179,6 +179,17 @@ config CPU_FREQ_GOV_CONSERVATIVE
If in doubt, say N.
+config GENERIC_CPUFREQ_CPU0
+ bool "Generic CPU0 cpufreq driver"
+ depends on HAVE_CLK && REGULATOR && PM_OPP && OF
+ select CPU_FREQ_TABLE
+ help
+ This adds a generic cpufreq driver for CPU0 frequency management.
+ It supports both uniprocessor (UP) and symmetric multiprocessor (SMP)
+ systems which share clock and voltage across all CPUs.
+
+ If in doubt, say N.
+
menu "x86 CPU frequency scaling drivers"
depends on X86
source "drivers/cpufreq/Kconfig.x86"
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index b99790f400c4..1bc90e1306d8 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -13,6 +13,8 @@ obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE) += cpufreq_conservative.o
# CPUfreq cross-arch helpers
obj-$(CONFIG_CPU_FREQ_TABLE) += freq_table.o
+obj-$(CONFIG_GENERIC_CPUFREQ_CPU0) += cpufreq-cpu0.o
+
##################################################################################
# x86 drivers.
# Link order matters. K8 is preferred to ACPI because of firmware bugs in early
diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c
new file mode 100644
index 000000000000..e9158278c71d
--- /dev/null
+++ b/drivers/cpufreq/cpufreq-cpu0.c
@@ -0,0 +1,269 @@
+/*
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ *
+ * The OPP code in function cpu0_set_target() is reused from
+ * drivers/cpufreq/omap-cpufreq.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/clk.h>
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/opp.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+static unsigned int transition_latency;
+static unsigned int voltage_tolerance; /* in percentage */
+
+static struct device *cpu_dev;
+static struct clk *cpu_clk;
+static struct regulator *cpu_reg;
+static struct cpufreq_frequency_table *freq_table;
+
+static int cpu0_verify_speed(struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, freq_table);
+}
+
+static unsigned int cpu0_get_speed(unsigned int cpu)
+{
+ return clk_get_rate(cpu_clk) / 1000;
+}
+
+static int cpu0_set_target(struct cpufreq_policy *policy,
+ unsigned int target_freq, unsigned int relation)
+{
+ struct cpufreq_freqs freqs;
+ struct opp *opp;
+ unsigned long freq_Hz, volt = 0, volt_old = 0, tol = 0;
+ unsigned int index, cpu;
+ int ret;
+
+ ret = cpufreq_frequency_table_target(policy, freq_table, target_freq,
+ relation, &index);
+ if (ret) {
+ pr_err("failed to match target freqency %d: %d\n",
+ target_freq, ret);
+ return ret;
+ }
+
+ freq_Hz = clk_round_rate(cpu_clk, freq_table[index].frequency * 1000);
+ if (freq_Hz < 0)
+ freq_Hz = freq_table[index].frequency * 1000;
+ freqs.new = freq_Hz / 1000;
+ freqs.old = clk_get_rate(cpu_clk) / 1000;
+
+ if (freqs.old == freqs.new)
+ return 0;
+
+ for_each_online_cpu(cpu) {
+ freqs.cpu = cpu;
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+ }
+
+ if (cpu_reg) {
+ opp = opp_find_freq_ceil(cpu_dev, &freq_Hz);
+ if (IS_ERR(opp)) {
+ pr_err("failed to find OPP for %ld\n", freq_Hz);
+ return PTR_ERR(opp);
+ }
+ volt = opp_get_voltage(opp);
+ tol = volt * voltage_tolerance / 100;
+ volt_old = regulator_get_voltage(cpu_reg);
+ }
+
+ pr_debug("%u MHz, %ld mV --> %u MHz, %ld mV\n",
+ freqs.old / 1000, volt_old ? volt_old / 1000 : -1,
+ freqs.new / 1000, volt ? volt / 1000 : -1);
+
+ /* scaling up? scale voltage before frequency */
+ if (cpu_reg && freqs.new > freqs.old) {
+ ret = regulator_set_voltage_tol(cpu_reg, volt, tol);
+ if (ret) {
+ pr_err("failed to scale voltage up: %d\n", ret);
+ freqs.new = freqs.old;
+ return ret;
+ }
+ }
+
+ ret = clk_set_rate(cpu_clk, freqs.new * 1000);
+ if (ret) {
+ pr_err("failed to set clock rate: %d\n", ret);
+ if (cpu_reg)
+ regulator_set_voltage_tol(cpu_reg, volt_old, tol);
+ return ret;
+ }
+
+ /* scaling down? scale voltage after frequency */
+ if (cpu_reg && freqs.new < freqs.old) {
+ ret = regulator_set_voltage_tol(cpu_reg, volt, tol);
+ if (ret) {
+ pr_err("failed to scale voltage down: %d\n", ret);
+ clk_set_rate(cpu_clk, freqs.old * 1000);
+ freqs.new = freqs.old;
+ return ret;
+ }
+ }
+
+ for_each_online_cpu(cpu) {
+ freqs.cpu = cpu;
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ }
+
+ return 0;
+}
+
+static int cpu0_cpufreq_init(struct cpufreq_policy *policy)
+{
+ int ret;
+
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ ret = cpufreq_frequency_table_cpuinfo(policy, freq_table);
+ if (ret) {
+ pr_err("invalid frequency table: %d\n", ret);
+ return ret;
+ }
+
+ policy->cpuinfo.transition_latency = transition_latency;
+ policy->cur = clk_get_rate(cpu_clk) / 1000;
+
+ /*
+ * The driver only supports the SMP configuartion where all processors
+ * share the clock and voltage and clock. Use cpufreq affected_cpus
+ * interface to have all CPUs scaled together.
+ */
+ policy->shared_type = CPUFREQ_SHARED_TYPE_ANY;
+ cpumask_setall(policy->cpus);
+
+ cpufreq_frequency_table_get_attr(freq_table, policy->cpu);
+
+ return 0;
+}
+
+static int cpu0_cpufreq_exit(struct cpufreq_policy *policy)
+{
+ cpufreq_frequency_table_put_attr(policy->cpu);
+
+ return 0;
+}
+
+static struct freq_attr *cpu0_cpufreq_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+static struct cpufreq_driver cpu0_cpufreq_driver = {
+ .flags = CPUFREQ_STICKY,
+ .verify = cpu0_verify_speed,
+ .target = cpu0_set_target,
+ .get = cpu0_get_speed,
+ .init = cpu0_cpufreq_init,
+ .exit = cpu0_cpufreq_exit,
+ .name = "generic_cpu0",
+ .attr = cpu0_cpufreq_attr,
+};
+
+static int __devinit cpu0_cpufreq_driver_init(void)
+{
+ struct device_node *np;
+ int ret;
+
+ np = of_find_node_by_path("/cpus/cpu@0");
+ if (!np) {
+ pr_err("failed to find cpu0 node\n");
+ return -ENOENT;
+ }
+
+ cpu_dev = get_cpu_device(0);
+ if (!cpu_dev) {
+ pr_err("failed to get cpu0 device\n");
+ ret = -ENODEV;
+ goto out_put_node;
+ }
+
+ cpu_dev->of_node = np;
+
+ cpu_clk = clk_get(cpu_dev, NULL);
+ if (IS_ERR(cpu_clk)) {
+ ret = PTR_ERR(cpu_clk);
+ pr_err("failed to get cpu0 clock: %d\n", ret);
+ goto out_put_node;
+ }
+
+ cpu_reg = regulator_get(cpu_dev, "cpu0");
+ if (IS_ERR(cpu_reg)) {
+ pr_warn("failed to get cpu0 regulator\n");
+ cpu_reg = NULL;
+ }
+
+ ret = of_init_opp_table(cpu_dev);
+ if (ret) {
+ pr_err("failed to init OPP table: %d\n", ret);
+ goto out_put_node;
+ }
+
+ ret = opp_init_cpufreq_table(cpu_dev, &freq_table);
+ if (ret) {
+ pr_err("failed to init cpufreq table: %d\n", ret);
+ goto out_put_node;
+ }
+
+ of_property_read_u32(np, "voltage-tolerance", &voltage_tolerance);
+
+ if (of_property_read_u32(np, "clock-latency", &transition_latency))
+ transition_latency = CPUFREQ_ETERNAL;
+
+ if (cpu_reg) {
+ struct opp *opp;
+ unsigned long min_uV, max_uV;
+ int i;
+
+ /*
+ * OPP is maintained in order of increasing frequency, and
+ * freq_table initialised from OPP is therefore sorted in the
+ * same order.
+ */
+ for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++)
+ ;
+ opp = opp_find_freq_exact(cpu_dev,
+ freq_table[0].frequency * 1000, true);
+ min_uV = opp_get_voltage(opp);
+ opp = opp_find_freq_exact(cpu_dev,
+ freq_table[i-1].frequency * 1000, true);
+ max_uV = opp_get_voltage(opp);
+ ret = regulator_set_voltage_time(cpu_reg, min_uV, max_uV);
+ if (ret > 0)
+ transition_latency += ret * 1000;
+ }
+
+ ret = cpufreq_register_driver(&cpu0_cpufreq_driver);
+ if (ret) {
+ pr_err("failed register driver: %d\n", ret);
+ goto out_free_table;
+ }
+
+ of_node_put(np);
+ return 0;
+
+out_free_table:
+ opp_free_cpufreq_table(cpu_dev, &freq_table);
+out_put_node:
+ of_node_put(np);
+ return ret;
+}
+late_initcall(cpu0_cpufreq_driver_init);
+
+MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
+MODULE_DESCRIPTION("Generic CPU0 cpufreq driver");
+MODULE_LICENSE("GPL");
OpenPOWER on IntegriCloud