arm64: arch_timer: Work around QorIQ Erratum A-008585

Erratum A-008585 says that the ARM generic timer counter "has the
potential to contain an erroneous value for a small number of core
clock cycles every time the timer value changes".  Accesses to TVAL
(both read and write) are also affected due to the implicit counter
read.  Accesses to CVAL are not affected.

The workaround is to reread TVAL and count registers until successive
reads return the same value.  Writes to TVAL are replaced with an
equivalent write to CVAL.

The workaround is to reread TVAL and count registers until successive reads
return the same value, and when writing TVAL to retry until counter
reads before and after the write return the same value.

The workaround is enabled if the fsl,erratum-a008585 property is found in
the timer node in the device tree.  This can be overridden with the
clocksource.arm_arch_timer.fsl-a008585 boot parameter, which allows KVM
users to enable the workaround until a mechanism is implemented to
automatically communicate this information.

This erratum can be found on LS1043A and LS2080A.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Scott Wood <oss@buserror.net>
[will: renamed read macro to reflect that it's not usually unstable]
Signed-off-by: Will Deacon <will.deacon@arm.com>

2 files changed, 114 insertions, 0 deletions

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 567788664723..8a753fd5b79d 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -305,6 +305,16 @@ config ARM_ARCH_TIMER_EVTSTREAM
 	  This must be disabled for hardware validation purposes to detect any
 	  hardware anomalies of missing events.
 
+config FSL_ERRATUM_A008585
+	bool "Workaround for Freescale/NXP Erratum A-008585"
+	default y
+	depends on ARM_ARCH_TIMER && ARM64
+	help
+	  This option enables a workaround for Freescale/NXP Erratum
+	  A-008585 ("ARM generic timer may contain an erroneous
+	  value").  The workaround will only be active if the
+	  fsl,erratum-a008585 property is found in the timer node.
+
 config ARM_GLOBAL_TIMER
 	bool "Support for the ARM global timer" if COMPILE_TEST
 	select CLKSRC_OF if OF
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 57700541f951..eb5fb4121ac8 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -94,6 +94,43 @@ early_param("clocksource.arm_arch_timer.evtstrm", early_evtstrm_cfg);
  * Architected system timer support.
  */
 
+#ifdef CONFIG_FSL_ERRATUM_A008585
+DEFINE_STATIC_KEY_FALSE(arch_timer_read_ool_enabled);
+EXPORT_SYMBOL_GPL(arch_timer_read_ool_enabled);
+
+static int fsl_a008585_enable = -1;
+
+static int __init early_fsl_a008585_cfg(char *buf)
+{
+	int ret;
+	bool val;
+
+	ret = strtobool(buf, &val);
+	if (ret)
+		return ret;
+
+	fsl_a008585_enable = val;
+	return 0;
+}
+early_param("clocksource.arm_arch_timer.fsl-a008585", early_fsl_a008585_cfg);
+
+u32 __fsl_a008585_read_cntp_tval_el0(void)
+{
+	return __fsl_a008585_read_reg(cntp_tval_el0);
+}
+
+u32 __fsl_a008585_read_cntv_tval_el0(void)
+{
+	return __fsl_a008585_read_reg(cntv_tval_el0);
+}
+
+u64 __fsl_a008585_read_cntvct_el0(void)
+{
+	return __fsl_a008585_read_reg(cntvct_el0);
+}
+EXPORT_SYMBOL(__fsl_a008585_read_cntvct_el0);
+#endif /* CONFIG_FSL_ERRATUM_A008585 */
+
 static __always_inline
 void arch_timer_reg_write(int access, enum arch_timer_reg reg, u32 val,
 			  struct clock_event_device *clk)
@@ -243,6 +280,40 @@ static __always_inline void set_next_event(const int access, unsigned long evt,
 	arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl, clk);
 }
 
+#ifdef CONFIG_FSL_ERRATUM_A008585
+static __always_inline void fsl_a008585_set_next_event(const int access,
+		unsigned long evt, struct clock_event_device *clk)
+{
+	unsigned long ctrl;
+	u64 cval = evt + arch_counter_get_cntvct();
+
+	ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL, clk);
+	ctrl |= ARCH_TIMER_CTRL_ENABLE;
+	ctrl &= ~ARCH_TIMER_CTRL_IT_MASK;
+
+	if (access == ARCH_TIMER_PHYS_ACCESS)
+		write_sysreg(cval, cntp_cval_el0);
+	else if (access == ARCH_TIMER_VIRT_ACCESS)
+		write_sysreg(cval, cntv_cval_el0);
+
+	arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl, clk);
+}
+
+static int fsl_a008585_set_next_event_virt(unsigned long evt,
+					   struct clock_event_device *clk)
+{
+	fsl_a008585_set_next_event(ARCH_TIMER_VIRT_ACCESS, evt, clk);
+	return 0;
+}
+
+static int fsl_a008585_set_next_event_phys(unsigned long evt,
+					   struct clock_event_device *clk)
+{
+	fsl_a008585_set_next_event(ARCH_TIMER_PHYS_ACCESS, evt, clk);
+	return 0;
+}
+#endif /* CONFIG_FSL_ERRATUM_A008585 */
+
 static int arch_timer_set_next_event_virt(unsigned long evt,
 					  struct clock_event_device *clk)
 {
@@ -271,6 +342,19 @@ static int arch_timer_set_next_event_phys_mem(unsigned long evt,
 	return 0;
 }
 
+static void fsl_a008585_set_sne(struct clock_event_device *clk)
+{
+#ifdef CONFIG_FSL_ERRATUM_A008585
+	if (!static_branch_unlikely(&arch_timer_read_ool_enabled))
+		return;
+
+	if (arch_timer_uses_ppi == VIRT_PPI)
+		clk->set_next_event = fsl_a008585_set_next_event_virt;
+	else
+		clk->set_next_event = fsl_a008585_set_next_event_phys;
+#endif
+}
+
 static void __arch_timer_setup(unsigned type,
 			       struct clock_event_device *clk)
 {
@@ -299,6 +383,8 @@ static void __arch_timer_setup(unsigned type,
 		default:
 			BUG();
 		}
+
+		fsl_a008585_set_sne(clk);
 	} else {
 		clk->features |= CLOCK_EVT_FEAT_DYNIRQ;
 		clk->name = "arch_mem_timer";
@@ -515,6 +601,15 @@ static void __init arch_counter_register(unsigned type)
 			arch_timer_read_counter = arch_counter_get_cntvct;
 		else
 			arch_timer_read_counter = arch_counter_get_cntpct;
+
+#ifdef CONFIG_FSL_ERRATUM_A008585
+		/*
+		 * Don't use the vdso fastpath if errata require using
+		 * the out-of-line counter accessor.
+		 */
+		if (static_branch_unlikely(&arch_timer_read_ool_enabled))
+			clocksource_counter.name = "arch_sys_counter_ool";
+#endif
 	} else {
 		arch_timer_read_counter = arch_counter_get_cntvct_mem;
 
@@ -800,6 +895,15 @@ static int __init arch_timer_of_init(struct device_node *np)
 
 	arch_timer_c3stop = !of_property_read_bool(np, "always-on");
 
+#ifdef CONFIG_FSL_ERRATUM_A008585
+	if (fsl_a008585_enable < 0)
+		fsl_a008585_enable = of_property_read_bool(np, "fsl,erratum-a008585");
+	if (fsl_a008585_enable) {
+		static_branch_enable(&arch_timer_read_ool_enabled);
+		pr_info("Enabling workaround for FSL erratum A-008585\n");
+	}
+#endif
+
 	/*
 	 * If we cannot rely on firmware initializing the timer registers then
 	 * we should use the physical timers instead.