summaryrefslogtreecommitdiffstats
path: root/drivers/clk
diff options
context:
space:
mode:
authorStephen Boyd <sboyd@codeaurora.org>2015-07-28 11:58:26 -0700
committerStephen Boyd <sboyd@codeaurora.org>2015-07-28 11:58:26 -0700
commit4d341056202a4725777ed99897f6456405819cd4 (patch)
tree45fb9d229bacf995aabcad282937568e5201b5a7 /drivers/clk
parente306479ac252928b84cc563c6e790f9b7e7ae427 (diff)
parent989feafb84118a840ff21250a1e5f516f43e3dbb (diff)
downloadblackbird-op-linux-4d341056202a4725777ed99897f6456405819cd4.tar.gz
blackbird-op-linux-4d341056202a4725777ed99897f6456405819cd4.zip
Merge branch 'for-4.2/ti-clk-move' of https://github.com/t-kristo/linux-pm into clk-next
From Tero Kristo: "This pull request contains the TI clock driver set to move the clock implementations under clock driver. Some small portions of the clock driver code still remain under mach-omap2 after this, it should be decided whether this code is now obsolete and should be deleted or should someone try to fix it." Slight merge conflicts with determine_rate prototype changes.
Diffstat (limited to 'drivers/clk')
-rw-r--r--drivers/clk/ti/Makefile17
-rw-r--r--drivers/clk/ti/apll.c2
-rw-r--r--drivers/clk/ti/autoidle.c121
-rw-r--r--drivers/clk/ti/clk-2xxx.c2
-rw-r--r--drivers/clk/ti/clk-33xx.c2
-rw-r--r--drivers/clk/ti/clk-3xxx.c244
-rw-r--r--drivers/clk/ti/clk-43xx.c2
-rw-r--r--drivers/clk/ti/clk-44xx.c2
-rw-r--r--drivers/clk/ti/clk-54xx.c2
-rw-r--r--drivers/clk/ti/clk-7xx.c3
-rw-r--r--drivers/clk/ti/clk-816x.c2
-rw-r--r--drivers/clk/ti/clk.c145
-rw-r--r--drivers/clk/ti/clkt_dflt.c316
-rw-r--r--drivers/clk/ti/clkt_dpll.c369
-rw-r--r--drivers/clk/ti/clkt_iclk.c101
-rw-r--r--drivers/clk/ti/clock.h105
-rw-r--r--drivers/clk/ti/clockdomain.c78
-rw-r--r--drivers/clk/ti/dpll3xxx.c820
-rw-r--r--drivers/clk/ti/dpll44xx.c227
-rw-r--r--drivers/clk/ti/fixed-factor.c2
20 files changed, 2543 insertions, 19 deletions
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 105ffd0f5e79..9b93e6904359 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,16 +1,19 @@
obj-y += clk.o autoidle.o clockdomain.o
clk-common = dpll.o composite.o divider.o gate.o \
- fixed-factor.o mux.o apll.o
-obj-$(CONFIG_SOC_AM33XX) += $(clk-common) clk-33xx.o
+ fixed-factor.o mux.o apll.o \
+ clkt_dpll.o clkt_iclk.o clkt_dflt.o
+obj-$(CONFIG_SOC_AM33XX) += $(clk-common) clk-33xx.o dpll3xxx.o
obj-$(CONFIG_SOC_TI81XX) += $(clk-common) fapll.o clk-816x.o
obj-$(CONFIG_ARCH_OMAP2) += $(clk-common) interface.o clk-2xxx.o
obj-$(CONFIG_ARCH_OMAP3) += $(clk-common) interface.o \
- clk-3xxx.o
-obj-$(CONFIG_ARCH_OMAP4) += $(clk-common) clk-44xx.o
-obj-$(CONFIG_SOC_OMAP5) += $(clk-common) clk-54xx.o
+ clk-3xxx.o dpll3xxx.o
+obj-$(CONFIG_ARCH_OMAP4) += $(clk-common) clk-44xx.o \
+ dpll3xxx.o dpll44xx.o
+obj-$(CONFIG_SOC_OMAP5) += $(clk-common) clk-54xx.o \
+ dpll3xxx.o dpll44xx.o
obj-$(CONFIG_SOC_DRA7XX) += $(clk-common) clk-7xx.o \
- clk-dra7-atl.o
-obj-$(CONFIG_SOC_AM43XX) += $(clk-common) clk-43xx.o
+ clk-dra7-atl.o dpll3xxx.o dpll44xx.o
+obj-$(CONFIG_SOC_AM43XX) += $(clk-common) dpll3xxx.o clk-43xx.o
ifdef CONFIG_ATAGS
obj-$(CONFIG_ARCH_OMAP3) += clk-3xxx-legacy.o
diff --git a/drivers/clk/ti/apll.c b/drivers/clk/ti/apll.c
index 49baf3831546..594b759f02ee 100644
--- a/drivers/clk/ti/apll.c
+++ b/drivers/clk/ti/apll.c
@@ -27,6 +27,8 @@
#include <linux/clk/ti.h>
#include <linux/delay.h>
+#include "clock.h"
+
#define APLL_FORCE_LOCK 0x1
#define APLL_AUTO_IDLE 0x2
#define MAX_APLL_WAIT_TRIES 1000000
diff --git a/drivers/clk/ti/autoidle.c b/drivers/clk/ti/autoidle.c
index e75c64c9e81c..94f0dcd94181 100644
--- a/drivers/clk/ti/autoidle.c
+++ b/drivers/clk/ti/autoidle.c
@@ -22,6 +22,8 @@
#include <linux/of_address.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
struct clk_ti_autoidle {
void __iomem *reg;
u8 shift;
@@ -33,8 +35,47 @@ struct clk_ti_autoidle {
#define AUTOIDLE_LOW 0x1
static LIST_HEAD(autoidle_clks);
+static LIST_HEAD(clk_hw_omap_clocks);
-static void ti_allow_autoidle(struct clk_ti_autoidle *clk)
+/**
+ * omap2_clk_deny_idle - disable autoidle on an OMAP clock
+ * @clk: struct clk * to disable autoidle for
+ *
+ * Disable autoidle on an OMAP clock.
+ */
+int omap2_clk_deny_idle(struct clk *clk)
+{
+ struct clk_hw_omap *c;
+
+ if (__clk_get_flags(clk) & CLK_IS_BASIC)
+ return -EINVAL;
+
+ c = to_clk_hw_omap(__clk_get_hw(clk));
+ if (c->ops && c->ops->deny_idle)
+ c->ops->deny_idle(c);
+ return 0;
+}
+
+/**
+ * omap2_clk_allow_idle - enable autoidle on an OMAP clock
+ * @clk: struct clk * to enable autoidle for
+ *
+ * Enable autoidle on an OMAP clock.
+ */
+int omap2_clk_allow_idle(struct clk *clk)
+{
+ struct clk_hw_omap *c;
+
+ if (__clk_get_flags(clk) & CLK_IS_BASIC)
+ return -EINVAL;
+
+ c = to_clk_hw_omap(__clk_get_hw(clk));
+ if (c->ops && c->ops->allow_idle)
+ c->ops->allow_idle(c);
+ return 0;
+}
+
+static void _allow_autoidle(struct clk_ti_autoidle *clk)
{
u32 val;
@@ -48,7 +89,7 @@ static void ti_allow_autoidle(struct clk_ti_autoidle *clk)
ti_clk_ll_ops->clk_writel(val, clk->reg);
}
-static void ti_deny_autoidle(struct clk_ti_autoidle *clk)
+static void _deny_autoidle(struct clk_ti_autoidle *clk)
{
u32 val;
@@ -63,31 +104,31 @@ static void ti_deny_autoidle(struct clk_ti_autoidle *clk)
}
/**
- * of_ti_clk_allow_autoidle_all - enable autoidle for all clocks
+ * _clk_generic_allow_autoidle_all - enable autoidle for all clocks
*
* Enables hardware autoidle for all registered DT clocks, which have
* the feature.
*/
-void of_ti_clk_allow_autoidle_all(void)
+static void _clk_generic_allow_autoidle_all(void)
{
struct clk_ti_autoidle *c;
list_for_each_entry(c, &autoidle_clks, node)
- ti_allow_autoidle(c);
+ _allow_autoidle(c);
}
/**
- * of_ti_clk_deny_autoidle_all - disable autoidle for all clocks
+ * _clk_generic_deny_autoidle_all - disable autoidle for all clocks
*
* Disables hardware autoidle for all registered DT clocks, which have
* the feature.
*/
-void of_ti_clk_deny_autoidle_all(void)
+static void _clk_generic_deny_autoidle_all(void)
{
struct clk_ti_autoidle *c;
list_for_each_entry(c, &autoidle_clks, node)
- ti_deny_autoidle(c);
+ _deny_autoidle(c);
}
/**
@@ -131,3 +172,67 @@ int __init of_ti_clk_autoidle_setup(struct device_node *node)
return 0;
}
+
+/**
+ * omap2_init_clk_hw_omap_clocks - initialize an OMAP clock
+ * @clk: struct clk * to initialize
+ *
+ * Add an OMAP clock @clk to the internal list of OMAP clocks. Used
+ * temporarily for autoidle handling, until this support can be
+ * integrated into the common clock framework code in some way. No
+ * return value.
+ */
+void omap2_init_clk_hw_omap_clocks(struct clk *clk)
+{
+ struct clk_hw_omap *c;
+
+ if (__clk_get_flags(clk) & CLK_IS_BASIC)
+ return;
+
+ c = to_clk_hw_omap(__clk_get_hw(clk));
+ list_add(&c->node, &clk_hw_omap_clocks);
+}
+
+/**
+ * omap2_clk_enable_autoidle_all - enable autoidle on all OMAP clocks that
+ * support it
+ *
+ * Enable clock autoidle on all OMAP clocks that have allow_idle
+ * function pointers associated with them. This function is intended
+ * to be temporary until support for this is added to the common clock
+ * code. Returns 0.
+ */
+int omap2_clk_enable_autoidle_all(void)
+{
+ struct clk_hw_omap *c;
+
+ list_for_each_entry(c, &clk_hw_omap_clocks, node)
+ if (c->ops && c->ops->allow_idle)
+ c->ops->allow_idle(c);
+
+ _clk_generic_allow_autoidle_all();
+
+ return 0;
+}
+
+/**
+ * omap2_clk_disable_autoidle_all - disable autoidle on all OMAP clocks that
+ * support it
+ *
+ * Disable clock autoidle on all OMAP clocks that have allow_idle
+ * function pointers associated with them. This function is intended
+ * to be temporary until support for this is added to the common clock
+ * code. Returns 0.
+ */
+int omap2_clk_disable_autoidle_all(void)
+{
+ struct clk_hw_omap *c;
+
+ list_for_each_entry(c, &clk_hw_omap_clocks, node)
+ if (c->ops && c->ops->deny_idle)
+ c->ops->deny_idle(c);
+
+ _clk_generic_deny_autoidle_all();
+
+ return 0;
+}
diff --git a/drivers/clk/ti/clk-2xxx.c b/drivers/clk/ti/clk-2xxx.c
index c808ab3d2bb2..bd8790be2ab1 100644
--- a/drivers/clk/ti/clk-2xxx.c
+++ b/drivers/clk/ti/clk-2xxx.c
@@ -19,6 +19,8 @@
#include <linux/clk-provider.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
static struct ti_dt_clk omap2xxx_clks[] = {
DT_CLK(NULL, "func_32k_ck", "func_32k_ck"),
DT_CLK(NULL, "secure_32k_ck", "secure_32k_ck"),
diff --git a/drivers/clk/ti/clk-33xx.c b/drivers/clk/ti/clk-33xx.c
index 028b33783d38..733f9d374d0f 100644
--- a/drivers/clk/ti/clk-33xx.c
+++ b/drivers/clk/ti/clk-33xx.c
@@ -19,6 +19,8 @@
#include <linux/clk-provider.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
static struct ti_dt_clk am33xx_clks[] = {
DT_CLK(NULL, "clk_32768_ck", "clk_32768_ck"),
DT_CLK(NULL, "clk_rc32k_ck", "clk_rc32k_ck"),
diff --git a/drivers/clk/ti/clk-3xxx.c b/drivers/clk/ti/clk-3xxx.c
index 757636d166cf..6e33332b6b34 100644
--- a/drivers/clk/ti/clk-3xxx.c
+++ b/drivers/clk/ti/clk-3xxx.c
@@ -19,6 +19,226 @@
#include <linux/clk-provider.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
+/*
+ * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
+ * that are sourced by DPLL5, and both of these require this clock
+ * to be at 120 MHz for proper operation.
+ */
+#define DPLL5_FREQ_FOR_USBHOST 120000000
+
+#define OMAP3430ES2_ST_DSS_IDLE_SHIFT 1
+#define OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT 5
+#define OMAP3430ES2_ST_SSI_IDLE_SHIFT 8
+
+#define OMAP34XX_CM_IDLEST_VAL 1
+
+/*
+ * In AM35xx IPSS, the {ICK,FCK} enable bits for modules are exported
+ * in the same register at a bit offset of 0x8. The EN_ACK for ICK is
+ * at an offset of 4 from ICK enable bit.
+ */
+#define AM35XX_IPSS_ICK_MASK 0xF
+#define AM35XX_IPSS_ICK_EN_ACK_OFFSET 0x4
+#define AM35XX_IPSS_ICK_FCK_OFFSET 0x8
+#define AM35XX_IPSS_CLK_IDLEST_VAL 0
+
+#define AM35XX_ST_IPSS_SHIFT 5
+
+/**
+ * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift
+ * from the CM_{I,F}CLKEN bit. Pass back the correct info via
+ * @idlest_reg and @idlest_bit. No return value.
+ */
+static void omap3430es2_clk_ssi_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait = {
+ .find_idlest = omap3430es2_clk_ssi_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait = {
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+ .find_idlest = omap3430es2_clk_ssi_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+/**
+ * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * Some OMAP modules on OMAP3 ES2+ chips have both initiator and
+ * target IDLEST bits. For our purposes, we are concerned with the
+ * target IDLEST bits, which exist at a different bit position than
+ * the *CLKEN bit position for these modules (DSS and USBHOST) (The
+ * default find_idlest code assumes that they are at the same
+ * position.) No return value.
+ */
+static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ /* USBHOST_IDLE has same shift */
+ *idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait = {
+ .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait = {
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+ .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+/**
+ * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different
+ * shift from the CM_{I,F}CLKEN bit. Pass back the correct info via
+ * @idlest_reg and @idlest_bit. No return value.
+ */
+static void omap3430es2_clk_hsotgusb_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait = {
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+ .find_idlest = omap3430es2_clk_hsotgusb_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait = {
+ .find_idlest = omap3430es2_clk_hsotgusb_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+/**
+ * am35xx_clk_find_idlest - return clock ACK info for AM35XX IPSS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The interface clocks on AM35xx IPSS reflects the clock idle status
+ * in the enable register itsel at a bit offset of 4 from the enable
+ * bit. A value of 1 indicates that clock is enabled.
+ */
+static void am35xx_clk_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ *idlest_reg = (__force void __iomem *)(clk->enable_reg);
+ *idlest_bit = clk->enable_bit + AM35XX_IPSS_ICK_EN_ACK_OFFSET;
+ *idlest_val = AM35XX_IPSS_CLK_IDLEST_VAL;
+}
+
+/**
+ * am35xx_clk_find_companion - find companion clock to @clk
+ * @clk: struct clk * to find the companion clock of
+ * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
+ * @other_bit: u8 ** to return the companion clock bit shift in
+ *
+ * Some clocks don't have companion clocks. For example, modules with
+ * only an interface clock (such as HECC) don't have a companion
+ * clock. Right now, this code relies on the hardware exporting a bit
+ * in the correct companion register that indicates that the
+ * nonexistent 'companion clock' is active. Future patches will
+ * associate this type of code with per-module data structures to
+ * avoid this issue, and remove the casts. No return value.
+ */
+static void am35xx_clk_find_companion(struct clk_hw_omap *clk,
+ void __iomem **other_reg,
+ u8 *other_bit)
+{
+ *other_reg = (__force void __iomem *)(clk->enable_reg);
+ if (clk->enable_bit & AM35XX_IPSS_ICK_MASK)
+ *other_bit = clk->enable_bit + AM35XX_IPSS_ICK_FCK_OFFSET;
+ else
+ *other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET;
+}
+
+const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait = {
+ .find_idlest = am35xx_clk_find_idlest,
+ .find_companion = am35xx_clk_find_companion,
+};
+
+/**
+ * am35xx_clk_ipss_find_idlest - return CM_IDLEST info for IPSS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The IPSS target CM_IDLEST bit is at a different shift from the
+ * CM_{I,F}CLKEN bit. Pass back the correct info via @idlest_reg
+ * and @idlest_bit. No return value.
+ */
+static void am35xx_clk_ipss_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = AM35XX_ST_IPSS_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
+
+const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait = {
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+ .find_idlest = am35xx_clk_ipss_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
static struct ti_dt_clk omap3xxx_clks[] = {
DT_CLK(NULL, "apb_pclk", "dummy_apb_pclk"),
@@ -324,6 +544,30 @@ enum {
OMAP3_SOC_OMAP3630,
};
+/**
+ * omap3_clk_lock_dpll5 - locks DPLL5
+ *
+ * Locks DPLL5 to a pre-defined frequency. This is required for proper
+ * operation of USB.
+ */
+void __init omap3_clk_lock_dpll5(void)
+{
+ struct clk *dpll5_clk;
+ struct clk *dpll5_m2_clk;
+
+ dpll5_clk = clk_get(NULL, "dpll5_ck");
+ clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
+ clk_prepare_enable(dpll5_clk);
+
+ /* Program dpll5_m2_clk divider for no division */
+ dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
+ clk_prepare_enable(dpll5_m2_clk);
+ clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
+
+ clk_disable_unprepare(dpll5_m2_clk);
+ clk_disable_unprepare(dpll5_clk);
+}
+
static int __init omap3xxx_dt_clk_init(int soc_type)
{
if (soc_type == OMAP3_SOC_AM35XX || soc_type == OMAP3_SOC_OMAP3630 ||
diff --git a/drivers/clk/ti/clk-43xx.c b/drivers/clk/ti/clk-43xx.c
index 3795fce8a830..894316738459 100644
--- a/drivers/clk/ti/clk-43xx.c
+++ b/drivers/clk/ti/clk-43xx.c
@@ -19,6 +19,8 @@
#include <linux/clk-provider.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
static struct ti_dt_clk am43xx_clks[] = {
DT_CLK(NULL, "clk_32768_ck", "clk_32768_ck"),
DT_CLK(NULL, "clk_rc32k_ck", "clk_rc32k_ck"),
diff --git a/drivers/clk/ti/clk-44xx.c b/drivers/clk/ti/clk-44xx.c
index 581db7711f51..7a8b51b35f9f 100644
--- a/drivers/clk/ti/clk-44xx.c
+++ b/drivers/clk/ti/clk-44xx.c
@@ -16,6 +16,8 @@
#include <linux/clkdev.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
/*
* OMAP4 ABE DPLL default frequency. In OMAP4460 TRM version V, section
* "3.6.3.2.3 CM1_ABE Clock Generator" states that the "DPLL_ABE_X2_CLK
diff --git a/drivers/clk/ti/clk-54xx.c b/drivers/clk/ti/clk-54xx.c
index 96c69a335975..59ce2fa2c104 100644
--- a/drivers/clk/ti/clk-54xx.c
+++ b/drivers/clk/ti/clk-54xx.c
@@ -17,6 +17,8 @@
#include <linux/io.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
#define OMAP5_DPLL_ABE_DEFFREQ 98304000
/*
diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx.c
index 63b8323df918..9b5b289e6334 100644
--- a/drivers/clk/ti/clk-7xx.c
+++ b/drivers/clk/ti/clk-7xx.c
@@ -16,11 +16,12 @@
#include <linux/clkdev.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
#define DRA7_DPLL_ABE_DEFFREQ 180633600
#define DRA7_DPLL_GMAC_DEFFREQ 1000000000
#define DRA7_DPLL_USB_DEFFREQ 960000000
-
static struct ti_dt_clk dra7xx_clks[] = {
DT_CLK(NULL, "atl_clkin0_ck", "atl_clkin0_ck"),
DT_CLK(NULL, "atl_clkin1_ck", "atl_clkin1_ck"),
diff --git a/drivers/clk/ti/clk-816x.c b/drivers/clk/ti/clk-816x.c
index 9451e651a1ff..c69352b24dba 100644
--- a/drivers/clk/ti/clk-816x.c
+++ b/drivers/clk/ti/clk-816x.c
@@ -14,6 +14,8 @@
#include <linux/clk-provider.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
static struct ti_dt_clk dm816x_clks[] = {
DT_CLK(NULL, "sys_clkin", "sys_clkin_ck"),
DT_CLK(NULL, "timer_sys_ck", "sys_clkin_ck"),
diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index 64bb5e8a3b8c..3343bde47fe4 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -21,6 +21,8 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/list.h>
+#include <linux/regmap.h>
+#include <linux/bootmem.h>
#include "clock.h"
@@ -30,6 +32,63 @@
struct ti_clk_ll_ops *ti_clk_ll_ops;
static struct device_node *clocks_node_ptr[CLK_MAX_MEMMAPS];
+struct ti_clk_features ti_clk_features;
+
+struct clk_iomap {
+ struct regmap *regmap;
+ void __iomem *mem;
+};
+
+static struct clk_iomap *clk_memmaps[CLK_MAX_MEMMAPS];
+
+static void clk_memmap_writel(u32 val, void __iomem *reg)
+{
+ struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
+ struct clk_iomap *io = clk_memmaps[r->index];
+
+ if (io->regmap)
+ regmap_write(io->regmap, r->offset, val);
+ else
+ writel_relaxed(val, io->mem + r->offset);
+}
+
+static u32 clk_memmap_readl(void __iomem *reg)
+{
+ u32 val;
+ struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
+ struct clk_iomap *io = clk_memmaps[r->index];
+
+ if (io->regmap)
+ regmap_read(io->regmap, r->offset, &val);
+ else
+ val = readl_relaxed(io->mem + r->offset);
+
+ return val;
+}
+
+/**
+ * ti_clk_setup_ll_ops - setup low level clock operations
+ * @ops: low level clock ops descriptor
+ *
+ * Sets up low level clock operations for TI clock driver. This is used
+ * to provide various callbacks for the clock driver towards platform
+ * specific code. Returns 0 on success, -EBUSY if ll_ops have been
+ * registered already.
+ */
+int ti_clk_setup_ll_ops(struct ti_clk_ll_ops *ops)
+{
+ if (ti_clk_ll_ops) {
+ pr_err("Attempt to register ll_ops multiple times.\n");
+ return -EBUSY;
+ }
+
+ ti_clk_ll_ops = ops;
+ ops->clk_readl = clk_memmap_readl;
+ ops->clk_writel = clk_memmap_writel;
+
+ return 0;
+}
+
/**
* ti_dt_clocks_register - register DT alias clocks during boot
* @oclks: list of clocks to register
@@ -138,28 +197,61 @@ void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index)
}
/**
- * ti_dt_clk_init_provider - init master clock provider
+ * omap2_clk_provider_init - init master clock provider
* @parent: master node
* @index: internal index for clk_reg_ops
+ * @syscon: syscon regmap pointer for accessing clock registers
+ * @mem: iomem pointer for the clock provider memory area, only used if
+ * syscon is not provided
*
* Initializes a master clock IP block. This basically sets up the
* mapping from clocks node to the memory map index. All the clocks
* are then initialized through the common of_clk_init call, and the
* clocks will access their memory maps based on the node layout.
+ * Returns 0 in success.
*/
-void ti_dt_clk_init_provider(struct device_node *parent, int index)
+int __init omap2_clk_provider_init(struct device_node *parent, int index,
+ struct regmap *syscon, void __iomem *mem)
{
struct device_node *clocks;
+ struct clk_iomap *io;
/* get clocks for this parent */
clocks = of_get_child_by_name(parent, "clocks");
if (!clocks) {
pr_err("%s missing 'clocks' child node.\n", parent->name);
- return;
+ return -EINVAL;
}
/* add clocks node info */
clocks_node_ptr[index] = clocks;
+
+ io = kzalloc(sizeof(*io), GFP_KERNEL);
+
+ io->regmap = syscon;
+ io->mem = mem;
+
+ clk_memmaps[index] = io;
+
+ return 0;
+}
+
+/**
+ * omap2_clk_legacy_provider_init - initialize a legacy clock provider
+ * @index: index for the clock provider
+ * @mem: iomem pointer for the clock provider memory area
+ *
+ * Initializes a legacy clock provider memory mapping.
+ */
+void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem)
+{
+ struct clk_iomap *io;
+
+ io = memblock_virt_alloc(sizeof(*io), 0);
+
+ io->mem = mem;
+
+ clk_memmaps[index] = io;
}
/**
@@ -311,3 +403,50 @@ int __init ti_clk_register_legacy_clks(struct ti_clk_alias *clks)
return 0;
}
#endif
+
+/**
+ * ti_clk_setup_features - setup clock features flags
+ * @features: features definition to use
+ *
+ * Initializes the clock driver features flags based on platform
+ * provided data. No return value.
+ */
+void __init ti_clk_setup_features(struct ti_clk_features *features)
+{
+ memcpy(&ti_clk_features, features, sizeof(*features));
+}
+
+/**
+ * ti_clk_get_features - get clock driver features flags
+ *
+ * Get TI clock driver features description. Returns a pointer
+ * to the current feature setup.
+ */
+const struct ti_clk_features *ti_clk_get_features(void)
+{
+ return &ti_clk_features;
+}
+
+/**
+ * omap2_clk_enable_init_clocks - prepare & enable a list of clocks
+ * @clk_names: ptr to an array of strings of clock names to enable
+ * @num_clocks: number of clock names in @clk_names
+ *
+ * Prepare and enable a list of clocks, named by @clk_names. No
+ * return value. XXX Deprecated; only needed until these clocks are
+ * properly claimed and enabled by the drivers or core code that uses
+ * them. XXX What code disables & calls clk_put on these clocks?
+ */
+void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks)
+{
+ struct clk *init_clk;
+ int i;
+
+ for (i = 0; i < num_clocks; i++) {
+ init_clk = clk_get(NULL, clk_names[i]);
+ if (WARN(IS_ERR(init_clk), "could not find init clock %s\n",
+ clk_names[i]))
+ continue;
+ clk_prepare_enable(init_clk);
+ }
+}
diff --git a/drivers/clk/ti/clkt_dflt.c b/drivers/clk/ti/clkt_dflt.c
new file mode 100644
index 000000000000..a176b8ac8dd0
--- /dev/null
+++ b/drivers/clk/ti/clkt_dflt.c
@@ -0,0 +1,316 @@
+/*
+ * Default clock type
+ *
+ * Copyright (C) 2005-2008, 2015 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/clk/ti.h>
+#include <linux/delay.h>
+
+#include "clock.h"
+
+/*
+ * MAX_MODULE_ENABLE_WAIT: maximum of number of microseconds to wait
+ * for a module to indicate that it is no longer in idle
+ */
+#define MAX_MODULE_ENABLE_WAIT 100000
+
+/*
+ * CM module register offsets, used for calculating the companion
+ * register addresses.
+ */
+#define CM_FCLKEN 0x0000
+#define CM_ICLKEN 0x0010
+
+/**
+ * _wait_idlest_generic - wait for a module to leave the idle state
+ * @clk: module clock to wait for (needed for register offsets)
+ * @reg: virtual address of module IDLEST register
+ * @mask: value to mask against to determine if the module is active
+ * @idlest: idle state indicator (0 or 1) for the clock
+ * @name: name of the clock (for printk)
+ *
+ * Wait for a module to leave idle, where its idle-status register is
+ * not inside the CM module. Returns 1 if the module left idle
+ * promptly, or 0 if the module did not leave idle before the timeout
+ * elapsed. XXX Deprecated - should be moved into drivers for the
+ * individual IP block that the IDLEST register exists in.
+ */
+static int _wait_idlest_generic(struct clk_hw_omap *clk, void __iomem *reg,
+ u32 mask, u8 idlest, const char *name)
+{
+ int i = 0, ena = 0;
+
+ ena = (idlest) ? 0 : mask;
+
+ /* Wait until module enters enabled state */
+ for (i = 0; i < MAX_MODULE_ENABLE_WAIT; i++) {
+ if ((ti_clk_ll_ops->clk_readl(reg) & mask) == ena)
+ break;
+ udelay(1);
+ }
+
+ if (i < MAX_MODULE_ENABLE_WAIT)
+ pr_debug("omap clock: module associated with clock %s ready after %d loops\n",
+ name, i);
+ else
+ pr_err("omap clock: module associated with clock %s didn't enable in %d tries\n",
+ name, MAX_MODULE_ENABLE_WAIT);
+
+ return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0;
+}
+
+/**
+ * _omap2_module_wait_ready - wait for an OMAP module to leave IDLE
+ * @clk: struct clk * belonging to the module
+ *
+ * If the necessary clocks for the OMAP hardware IP block that
+ * corresponds to clock @clk are enabled, then wait for the module to
+ * indicate readiness (i.e., to leave IDLE). This code does not
+ * belong in the clock code and will be moved in the medium term to
+ * module-dependent code. No return value.
+ */
+static void _omap2_module_wait_ready(struct clk_hw_omap *clk)
+{
+ void __iomem *companion_reg, *idlest_reg;
+ u8 other_bit, idlest_bit, idlest_val, idlest_reg_id;
+ s16 prcm_mod;
+ int r;
+
+ /* Not all modules have multiple clocks that their IDLEST depends on */
+ if (clk->ops->find_companion) {
+ clk->ops->find_companion(clk, &companion_reg, &other_bit);
+ if (!(ti_clk_ll_ops->clk_readl(companion_reg) &
+ (1 << other_bit)))
+ return;
+ }
+
+ clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val);
+ r = ti_clk_ll_ops->cm_split_idlest_reg(idlest_reg, &prcm_mod,
+ &idlest_reg_id);
+ if (r) {
+ /* IDLEST register not in the CM module */
+ _wait_idlest_generic(clk, idlest_reg, (1 << idlest_bit),
+ idlest_val, __clk_get_name(clk->hw.clk));
+ } else {
+ ti_clk_ll_ops->cm_wait_module_ready(0, prcm_mod, idlest_reg_id,
+ idlest_bit);
+ }
+}
+
+/**
+ * omap2_clk_dflt_find_companion - find companion clock to @clk
+ * @clk: struct clk * to find the companion clock of
+ * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
+ * @other_bit: u8 ** to return the companion clock bit shift in
+ *
+ * Note: We don't need special code here for INVERT_ENABLE for the
+ * time being since INVERT_ENABLE only applies to clocks enabled by
+ * CM_CLKEN_PLL
+ *
+ * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes it's
+ * just a matter of XORing the bits.
+ *
+ * Some clocks don't have companion clocks. For example, modules with
+ * only an interface clock (such as MAILBOXES) don't have a companion
+ * clock. Right now, this code relies on the hardware exporting a bit
+ * in the correct companion register that indicates that the
+ * nonexistent 'companion clock' is active. Future patches will
+ * associate this type of code with per-module data structures to
+ * avoid this issue, and remove the casts. No return value.
+ */
+void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
+ void __iomem **other_reg, u8 *other_bit)
+{
+ u32 r;
+
+ /*
+ * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes
+ * it's just a matter of XORing the bits.
+ */
+ r = ((__force u32)clk->enable_reg ^ (CM_FCLKEN ^ CM_ICLKEN));
+
+ *other_reg = (__force void __iomem *)r;
+ *other_bit = clk->enable_bit;
+}
+
+/**
+ * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk
+ * @clk: struct clk * to find IDLEST info for
+ * @idlest_reg: void __iomem ** to return the CM_IDLEST va in
+ * @idlest_bit: u8 * to return the CM_IDLEST bit shift in
+ * @idlest_val: u8 * to return the idle status indicator
+ *
+ * Return the CM_IDLEST register address and bit shift corresponding
+ * to the module that "owns" this clock. This default code assumes
+ * that the CM_IDLEST bit shift is the CM_*CLKEN bit shift, and that
+ * the IDLEST register address ID corresponds to the CM_*CLKEN
+ * register address ID (e.g., that CM_FCLKEN2 corresponds to
+ * CM_IDLEST2). This is not true for all modules. No return value.
+ */
+void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg, u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = clk->enable_bit;
+
+ /*
+ * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
+ * 34xx reverses this, just to keep us on our toes
+ * AM35xx uses both, depending on the module.
+ */
+ *idlest_val = ti_clk_get_features()->cm_idlest_val;
+}
+
+/**
+ * omap2_dflt_clk_enable - enable a clock in the hardware
+ * @hw: struct clk_hw * of the clock to enable
+ *
+ * Enable the clock @hw in the hardware. We first call into the OMAP
+ * clockdomain code to "enable" the corresponding clockdomain if this
+ * is the first enabled user of the clockdomain. Then program the
+ * hardware to enable the clock. Then wait for the IP block that uses
+ * this clock to leave idle (if applicable). Returns the error value
+ * from clkdm_clk_enable() if it terminated with an error, or -EINVAL
+ * if @hw has a null clock enable_reg, or zero upon success.
+ */
+int omap2_dflt_clk_enable(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk;
+ u32 v;
+ int ret = 0;
+ bool clkdm_control;
+
+ if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL)
+ clkdm_control = false;
+ else
+ clkdm_control = true;
+
+ clk = to_clk_hw_omap(hw);
+
+ if (clkdm_control && clk->clkdm) {
+ ret = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk);
+ if (ret) {
+ WARN(1,
+ "%s: could not enable %s's clockdomain %s: %d\n",
+ __func__, __clk_get_name(hw->clk),
+ clk->clkdm_name, ret);
+ return ret;
+ }
+ }
+
+ if (unlikely(!clk->enable_reg)) {
+ pr_err("%s: %s missing enable_reg\n", __func__,
+ __clk_get_name(hw->clk));
+ ret = -EINVAL;
+ goto err;
+ }
+
+ /* FIXME should not have INVERT_ENABLE bit here */
+ v = ti_clk_ll_ops->clk_readl(clk->enable_reg);
+ if (clk->flags & INVERT_ENABLE)
+ v &= ~(1 << clk->enable_bit);
+ else
+ v |= (1 << clk->enable_bit);
+ ti_clk_ll_ops->clk_writel(v, clk->enable_reg);
+ v = ti_clk_ll_ops->clk_readl(clk->enable_reg); /* OCP barrier */
+
+ if (clk->ops && clk->ops->find_idlest)
+ _omap2_module_wait_ready(clk);
+
+ return 0;
+
+err:
+ if (clkdm_control && clk->clkdm)
+ ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk);
+ return ret;
+}
+
+/**
+ * omap2_dflt_clk_disable - disable a clock in the hardware
+ * @hw: struct clk_hw * of the clock to disable
+ *
+ * Disable the clock @hw in the hardware, and call into the OMAP
+ * clockdomain code to "disable" the corresponding clockdomain if all
+ * clocks/hwmods in that clockdomain are now disabled. No return
+ * value.
+ */
+void omap2_dflt_clk_disable(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk;
+ u32 v;
+
+ clk = to_clk_hw_omap(hw);
+ if (!clk->enable_reg) {
+ /*
+ * 'independent' here refers to a clock which is not
+ * controlled by its parent.
+ */
+ pr_err("%s: independent clock %s has no enable_reg\n",
+ __func__, __clk_get_name(hw->clk));
+ return;
+ }
+
+ v = ti_clk_ll_ops->clk_readl(clk->enable_reg);
+ if (clk->flags & INVERT_ENABLE)
+ v |= (1 << clk->enable_bit);
+ else
+ v &= ~(1 << clk->enable_bit);
+ ti_clk_ll_ops->clk_writel(v, clk->enable_reg);
+ /* No OCP barrier needed here since it is a disable operation */
+
+ if (!(ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) &&
+ clk->clkdm)
+ ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk);
+}
+
+/**
+ * omap2_dflt_clk_is_enabled - is clock enabled in the hardware?
+ * @hw: struct clk_hw * to check
+ *
+ * Return 1 if the clock represented by @hw is enabled in the
+ * hardware, or 0 otherwise. Intended for use in the struct
+ * clk_ops.is_enabled function pointer.
+ */
+int omap2_dflt_clk_is_enabled(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ u32 v;
+
+ v = ti_clk_ll_ops->clk_readl(clk->enable_reg);
+
+ if (clk->flags & INVERT_ENABLE)
+ v ^= BIT(clk->enable_bit);
+
+ v &= BIT(clk->enable_bit);
+
+ return v ? 1 : 0;
+}
+
+const struct clk_hw_omap_ops clkhwops_wait = {
+ .find_idlest = omap2_clk_dflt_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
diff --git a/drivers/clk/ti/clkt_dpll.c b/drivers/clk/ti/clkt_dpll.c
new file mode 100644
index 000000000000..a01fc7f305c1
--- /dev/null
+++ b/drivers/clk/ti/clkt_dpll.c
@@ -0,0 +1,369 @@
+/*
+ * OMAP2/3/4 DPLL clock functions
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/clk/ti.h>
+
+#include <asm/div64.h>
+
+#include "clock.h"
+
+/* DPLL rate rounding: minimum DPLL multiplier, divider values */
+#define DPLL_MIN_MULTIPLIER 2
+#define DPLL_MIN_DIVIDER 1
+
+/* Possible error results from _dpll_test_mult */
+#define DPLL_MULT_UNDERFLOW -1
+
+/*
+ * Scale factor to mitigate roundoff errors in DPLL rate rounding.
+ * The higher the scale factor, the greater the risk of arithmetic overflow,
+ * but the closer the rounded rate to the target rate. DPLL_SCALE_FACTOR
+ * must be a power of DPLL_SCALE_BASE.
+ */
+#define DPLL_SCALE_FACTOR 64
+#define DPLL_SCALE_BASE 2
+#define DPLL_ROUNDING_VAL ((DPLL_SCALE_BASE / 2) * \
+ (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
+
+/*
+ * DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx.
+ * From device data manual section 4.3 "DPLL and DLL Specifications".
+ */
+#define OMAP3PLUS_DPLL_FINT_JTYPE_MIN 500000
+#define OMAP3PLUS_DPLL_FINT_JTYPE_MAX 2500000
+
+/* _dpll_test_fint() return codes */
+#define DPLL_FINT_UNDERFLOW -1
+#define DPLL_FINT_INVALID -2
+
+/* Private functions */
+
+/*
+ * _dpll_test_fint - test whether an Fint value is valid for the DPLL
+ * @clk: DPLL struct clk to test
+ * @n: divider value (N) to test
+ *
+ * Tests whether a particular divider @n will result in a valid DPLL
+ * internal clock frequency Fint. See the 34xx TRM 4.7.6.2 "DPLL Jitter
+ * Correction". Returns 0 if OK, -1 if the enclosing loop can terminate
+ * (assuming that it is counting N upwards), or -2 if the enclosing loop
+ * should skip to the next iteration (again assuming N is increasing).
+ */
+static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
+{
+ struct dpll_data *dd;
+ long fint, fint_min, fint_max;
+ int ret = 0;
+
+ dd = clk->dpll_data;
+
+ /* DPLL divider must result in a valid jitter correction val */
+ fint = __clk_get_rate(__clk_get_parent(clk->hw.clk)) / n;
+
+ if (dd->flags & DPLL_J_TYPE) {
+ fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN;
+ fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX;
+ } else {
+ fint_min = ti_clk_get_features()->fint_min;
+ fint_max = ti_clk_get_features()->fint_max;
+ }
+
+ if (!fint_min || !fint_max) {
+ WARN(1, "No fint limits available!\n");
+ return DPLL_FINT_INVALID;
+ }
+
+ if (fint < ti_clk_get_features()->fint_min) {
+ pr_debug("rejecting n=%d due to Fint failure, lowering max_divider\n",
+ n);
+ dd->max_divider = n;
+ ret = DPLL_FINT_UNDERFLOW;
+ } else if (fint > ti_clk_get_features()->fint_max) {
+ pr_debug("rejecting n=%d due to Fint failure, boosting min_divider\n",
+ n);
+ dd->min_divider = n;
+ ret = DPLL_FINT_INVALID;
+ } else if (fint > ti_clk_get_features()->fint_band1_max &&
+ fint < ti_clk_get_features()->fint_band2_min) {
+ pr_debug("rejecting n=%d due to Fint failure\n", n);
+ ret = DPLL_FINT_INVALID;
+ }
+
+ return ret;
+}
+
+static unsigned long _dpll_compute_new_rate(unsigned long parent_rate,
+ unsigned int m, unsigned int n)
+{
+ unsigned long long num;
+
+ num = (unsigned long long)parent_rate * m;
+ do_div(num, n);
+ return num;
+}
+
+/*
+ * _dpll_test_mult - test a DPLL multiplier value
+ * @m: pointer to the DPLL m (multiplier) value under test
+ * @n: current DPLL n (divider) value under test
+ * @new_rate: pointer to storage for the resulting rounded rate
+ * @target_rate: the desired DPLL rate
+ * @parent_rate: the DPLL's parent clock rate
+ *
+ * This code tests a DPLL multiplier value, ensuring that the
+ * resulting rate will not be higher than the target_rate, and that
+ * the multiplier value itself is valid for the DPLL. Initially, the
+ * integer pointed to by the m argument should be prescaled by
+ * multiplying by DPLL_SCALE_FACTOR. The code will replace this with
+ * a non-scaled m upon return. This non-scaled m will result in a
+ * new_rate as close as possible to target_rate (but not greater than
+ * target_rate) given the current (parent_rate, n, prescaled m)
+ * triple. Returns DPLL_MULT_UNDERFLOW in the event that the
+ * non-scaled m attempted to underflow, which can allow the calling
+ * function to bail out early; or 0 upon success.
+ */
+static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
+ unsigned long target_rate,
+ unsigned long parent_rate)
+{
+ int r = 0, carry = 0;
+
+ /* Unscale m and round if necessary */
+ if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL)
+ carry = 1;
+ *m = (*m / DPLL_SCALE_FACTOR) + carry;
+
+ /*
+ * The new rate must be <= the target rate to avoid programming
+ * a rate that is impossible for the hardware to handle
+ */
+ *new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
+ if (*new_rate > target_rate) {
+ (*m)--;
+ *new_rate = 0;
+ }
+
+ /* Guard against m underflow */
+ if (*m < DPLL_MIN_MULTIPLIER) {
+ *m = DPLL_MIN_MULTIPLIER;
+ *new_rate = 0;
+ r = DPLL_MULT_UNDERFLOW;
+ }
+
+ if (*new_rate == 0)
+ *new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
+
+ return r;
+}
+
+/**
+ * _omap2_dpll_is_in_bypass - check if DPLL is in bypass mode or not
+ * @v: bitfield value of the DPLL enable
+ *
+ * Checks given DPLL enable bitfield to see whether the DPLL is in bypass
+ * mode or not. Returns 1 if the DPLL is in bypass, 0 otherwise.
+ */
+static int _omap2_dpll_is_in_bypass(u32 v)
+{
+ u8 mask, val;
+
+ mask = ti_clk_get_features()->dpll_bypass_vals;
+
+ /*
+ * Each set bit in the mask corresponds to a bypass value equal
+ * to the bitshift. Go through each set-bit in the mask and
+ * compare against the given register value.
+ */
+ while (mask) {
+ val = __ffs(mask);
+ mask ^= (1 << val);
+ if (v == val)
+ return 1;
+ }
+
+ return 0;
+}
+
+/* Public functions */
+u8 omap2_init_dpll_parent(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ u32 v;
+ struct dpll_data *dd;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+ v &= dd->enable_mask;
+ v >>= __ffs(dd->enable_mask);
+
+ /* Reparent the struct clk in case the dpll is in bypass */
+ if (_omap2_dpll_is_in_bypass(v))
+ return 1;
+
+ return 0;
+}
+
+/**
+ * omap2_get_dpll_rate - returns the current DPLL CLKOUT rate
+ * @clk: struct clk * of a DPLL
+ *
+ * DPLLs can be locked or bypassed - basically, enabled or disabled.
+ * When locked, the DPLL output depends on the M and N values. When
+ * bypassed, on OMAP2xxx, the output rate is either the 32KiHz clock
+ * or sys_clk. Bypass rates on OMAP3 depend on the DPLL: DPLLs 1 and
+ * 2 are bypassed with dpll1_fclk and dpll2_fclk respectively
+ * (generated by DPLL3), while DPLL 3, 4, and 5 bypass rates are sys_clk.
+ * Returns the current DPLL CLKOUT rate (*not* CLKOUTX2) if the DPLL is
+ * locked, or the appropriate bypass rate if the DPLL is bypassed, or 0
+ * if the clock @clk is not a DPLL.
+ */
+unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
+{
+ long long dpll_clk;
+ u32 dpll_mult, dpll_div, v;
+ struct dpll_data *dd;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return 0;
+
+ /* Return bypass rate if DPLL is bypassed */
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+ v &= dd->enable_mask;
+ v >>= __ffs(dd->enable_mask);
+
+ if (_omap2_dpll_is_in_bypass(v))
+ return __clk_get_rate(dd->clk_bypass);
+
+ v = ti_clk_ll_ops->clk_readl(dd->mult_div1_reg);
+ dpll_mult = v & dd->mult_mask;
+ dpll_mult >>= __ffs(dd->mult_mask);
+ dpll_div = v & dd->div1_mask;
+ dpll_div >>= __ffs(dd->div1_mask);
+
+ dpll_clk = (long long)__clk_get_rate(dd->clk_ref) * dpll_mult;
+ do_div(dpll_clk, dpll_div + 1);
+
+ return dpll_clk;
+}
+
+/* DPLL rate rounding code */
+
+/**
+ * omap2_dpll_round_rate - round a target rate for an OMAP DPLL
+ * @clk: struct clk * for a DPLL
+ * @target_rate: desired DPLL clock rate
+ *
+ * Given a DPLL and a desired target rate, round the target rate to a
+ * possible, programmable rate for this DPLL. Attempts to select the
+ * minimum possible n. Stores the computed (m, n) in the DPLL's
+ * dpll_data structure so set_rate() will not need to call this
+ * (expensive) function again. Returns ~0 if the target rate cannot
+ * be rounded, or the rounded rate upon success.
+ */
+long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
+ unsigned long *parent_rate)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ int m, n, r, scaled_max_m;
+ int min_delta_m = INT_MAX, min_delta_n = INT_MAX;
+ unsigned long scaled_rt_rp;
+ unsigned long new_rate = 0;
+ struct dpll_data *dd;
+ unsigned long ref_rate;
+ long delta;
+ long prev_min_delta = LONG_MAX;
+ const char *clk_name;
+
+ if (!clk || !clk->dpll_data)
+ return ~0;
+
+ dd = clk->dpll_data;
+
+ ref_rate = __clk_get_rate(dd->clk_ref);
+ clk_name = __clk_get_name(hw->clk);
+ pr_debug("clock: %s: starting DPLL round_rate, target rate %lu\n",
+ clk_name, target_rate);
+
+ scaled_rt_rp = target_rate / (ref_rate / DPLL_SCALE_FACTOR);
+ scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
+
+ dd->last_rounded_rate = 0;
+
+ for (n = dd->min_divider; n <= dd->max_divider; n++) {
+ /* Is the (input clk, divider) pair valid for the DPLL? */
+ r = _dpll_test_fint(clk, n);
+ if (r == DPLL_FINT_UNDERFLOW)
+ break;
+ else if (r == DPLL_FINT_INVALID)
+ continue;
+
+ /* Compute the scaled DPLL multiplier, based on the divider */
+ m = scaled_rt_rp * n;
+
+ /*
+ * Since we're counting n up, a m overflow means we
+ * can bail out completely (since as n increases in
+ * the next iteration, there's no way that m can
+ * increase beyond the current m)
+ */
+ if (m > scaled_max_m)
+ break;
+
+ r = _dpll_test_mult(&m, n, &new_rate, target_rate,
+ ref_rate);
+
+ /* m can't be set low enough for this n - try with a larger n */
+ if (r == DPLL_MULT_UNDERFLOW)
+ continue;
+
+ /* skip rates above our target rate */
+ delta = target_rate - new_rate;
+ if (delta < 0)
+ continue;
+
+ if (delta < prev_min_delta) {
+ prev_min_delta = delta;
+ min_delta_m = m;
+ min_delta_n = n;
+ }
+
+ pr_debug("clock: %s: m = %d: n = %d: new_rate = %lu\n",
+ clk_name, m, n, new_rate);
+
+ if (delta == 0)
+ break;
+ }
+
+ if (prev_min_delta == LONG_MAX) {
+ pr_debug("clock: %s: cannot round to rate %lu\n",
+ clk_name, target_rate);
+ return ~0;
+ }
+
+ dd->last_rounded_m = min_delta_m;
+ dd->last_rounded_n = min_delta_n;
+ dd->last_rounded_rate = target_rate - prev_min_delta;
+
+ return dd->last_rounded_rate;
+}
diff --git a/drivers/clk/ti/clkt_iclk.c b/drivers/clk/ti/clkt_iclk.c
new file mode 100644
index 000000000000..38c36908cf88
--- /dev/null
+++ b/drivers/clk/ti/clkt_iclk.c
@@ -0,0 +1,101 @@
+/*
+ * OMAP2/3 interface clock control
+ *
+ * Copyright (C) 2011 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/clk/ti.h>
+
+#include "clock.h"
+
+/* Register offsets */
+#define OMAP24XX_CM_FCLKEN2 0x04
+#define CM_AUTOIDLE 0x30
+#define CM_ICLKEN 0x10
+#define CM_IDLEST 0x20
+
+#define OMAP24XX_CM_IDLEST_VAL 0
+
+/* Private functions */
+
+/* XXX */
+void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk)
+{
+ u32 v;
+ void __iomem *r;
+
+ r = (__force void __iomem *)
+ ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
+
+ v = ti_clk_ll_ops->clk_readl(r);
+ v |= (1 << clk->enable_bit);
+ ti_clk_ll_ops->clk_writel(v, r);
+}
+
+/* XXX */
+void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk)
+{
+ u32 v;
+ void __iomem *r;
+
+ r = (__force void __iomem *)
+ ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
+
+ v = ti_clk_ll_ops->clk_readl(r);
+ v &= ~(1 << clk->enable_bit);
+ ti_clk_ll_ops->clk_writel(v, r);
+}
+
+/**
+ * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the
+ * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE. This custom function
+ * passes back the correct CM_IDLEST register address for I2CHS
+ * modules. No return value.
+ */
+static void omap2430_clk_i2chs_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = ((__force u32)clk->enable_reg ^ (OMAP24XX_CM_FCLKEN2 ^ CM_IDLEST));
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = clk->enable_bit;
+ *idlest_val = OMAP24XX_CM_IDLEST_VAL;
+}
+
+/* Public data */
+
+const struct clk_hw_omap_ops clkhwops_iclk = {
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+};
+
+const struct clk_hw_omap_ops clkhwops_iclk_wait = {
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+ .find_idlest = omap2_clk_dflt_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+/* 2430 I2CHS has non-standard IDLEST register */
+const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait = {
+ .find_idlest = omap2430_clk_i2chs_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 404158d2d7f8..d8aafd333058 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -154,6 +154,35 @@ struct ti_clk_dpll {
u8 recal_st_bit;
};
+/* Composite clock component types */
+enum {
+ CLK_COMPONENT_TYPE_GATE = 0,
+ CLK_COMPONENT_TYPE_DIVIDER,
+ CLK_COMPONENT_TYPE_MUX,
+ CLK_COMPONENT_TYPE_MAX,
+};
+
+/**
+ * struct ti_dt_clk - OMAP DT clock alias declarations
+ * @lk: clock lookup definition
+ * @node_name: clock DT node to map to
+ */
+struct ti_dt_clk {
+ struct clk_lookup lk;
+ char *node_name;
+};
+
+#define DT_CLK(dev, con, name) \
+ { \
+ .lk = { \
+ .dev_id = dev, \
+ .con_id = con, \
+ }, \
+ .node_name = name, \
+ }
+
+typedef void (*ti_of_clk_init_cb_t)(struct clk_hw *, struct device_node *);
+
struct clk *ti_clk_register_gate(struct ti_clk *setup);
struct clk *ti_clk_register_interface(struct ti_clk *setup);
struct clk *ti_clk_register_mux(struct ti_clk *setup);
@@ -169,4 +198,80 @@ void ti_clk_patch_legacy_clks(struct ti_clk **patch);
struct clk *ti_clk_register_clk(struct ti_clk *setup);
int ti_clk_register_legacy_clks(struct ti_clk_alias *clks);
+void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
+void ti_dt_clocks_register(struct ti_dt_clk *oclks);
+int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
+ ti_of_clk_init_cb_t func);
+int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
+
+void omap2_init_clk_hw_omap_clocks(struct clk *clk);
+int of_ti_clk_autoidle_setup(struct device_node *node);
+void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
+
+extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
+extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
+extern const struct clk_hw_omap_ops clkhwops_wait;
+extern const struct clk_hw_omap_ops clkhwops_iclk;
+extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
+extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
+extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
+
+extern const struct clk_ops ti_clk_divider_ops;
+extern const struct clk_ops ti_clk_mux_ops;
+
+int omap2_clkops_enable_clkdm(struct clk_hw *hw);
+void omap2_clkops_disable_clkdm(struct clk_hw *hw);
+
+int omap2_dflt_clk_enable(struct clk_hw *hw);
+void omap2_dflt_clk_disable(struct clk_hw *hw);
+int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
+void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
+ void __iomem **other_reg,
+ u8 *other_bit);
+void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit, u8 *idlest_val);
+
+void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk);
+void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
+
+u8 omap2_init_dpll_parent(struct clk_hw *hw);
+int omap3_noncore_dpll_enable(struct clk_hw *hw);
+void omap3_noncore_dpll_disable(struct clk_hw *hw);
+int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index);
+int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate);
+int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate,
+ u8 index);
+int omap3_noncore_dpll_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req);
+long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
+ unsigned long *parent_rate);
+unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
+ unsigned long parent_rate);
+
+unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate);
+int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
+ unsigned long parent_rate);
+int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate, u8 index);
+void omap3_clk_lock_dpll5(void);
+
+unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
+ unsigned long parent_rate);
+long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
+ unsigned long target_rate,
+ unsigned long *parent_rate);
+int omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req);
+
+extern struct ti_clk_ll_ops *ti_clk_ll_ops;
+
#endif
diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c
index b82ef07f3403..fc517453321b 100644
--- a/drivers/clk/ti/clockdomain.c
+++ b/drivers/clk/ti/clockdomain.c
@@ -21,9 +21,87 @@
#include <linux/of_address.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
#undef pr_fmt
#define pr_fmt(fmt) "%s: " fmt, __func__
+/**
+ * omap2_clkops_enable_clkdm - increment usecount on clkdm of @hw
+ * @hw: struct clk_hw * of the clock being enabled
+ *
+ * Increment the usecount of the clockdomain of the clock pointed to
+ * by @hw; if the usecount is 1, the clockdomain will be "enabled."
+ * Only needed for clocks that don't use omap2_dflt_clk_enable() as
+ * their enable function pointer. Passes along the return value of
+ * clkdm_clk_enable(), -EINVAL if @hw is not associated with a
+ * clockdomain, or 0 if clock framework-based clockdomain control is
+ * not implemented.
+ */
+int omap2_clkops_enable_clkdm(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk;
+ int ret = 0;
+
+ clk = to_clk_hw_omap(hw);
+
+ if (unlikely(!clk->clkdm)) {
+ pr_err("%s: %s: no clkdm set ?!\n", __func__,
+ __clk_get_name(hw->clk));
+ return -EINVAL;
+ }
+
+ if (unlikely(clk->enable_reg))
+ pr_err("%s: %s: should use dflt_clk_enable ?!\n", __func__,
+ __clk_get_name(hw->clk));
+
+ if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
+ pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
+ __func__, __clk_get_name(hw->clk));
+ return 0;
+ }
+
+ ret = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk);
+ WARN(ret, "%s: could not enable %s's clockdomain %s: %d\n",
+ __func__, __clk_get_name(hw->clk), clk->clkdm_name, ret);
+
+ return ret;
+}
+
+/**
+ * omap2_clkops_disable_clkdm - decrement usecount on clkdm of @hw
+ * @hw: struct clk_hw * of the clock being disabled
+ *
+ * Decrement the usecount of the clockdomain of the clock pointed to
+ * by @hw; if the usecount is 0, the clockdomain will be "disabled."
+ * Only needed for clocks that don't use omap2_dflt_clk_disable() as their
+ * disable function pointer. No return value.
+ */
+void omap2_clkops_disable_clkdm(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk;
+
+ clk = to_clk_hw_omap(hw);
+
+ if (unlikely(!clk->clkdm)) {
+ pr_err("%s: %s: no clkdm set ?!\n", __func__,
+ __clk_get_name(hw->clk));
+ return;
+ }
+
+ if (unlikely(clk->enable_reg))
+ pr_err("%s: %s: should use dflt_clk_disable ?!\n", __func__,
+ __clk_get_name(hw->clk));
+
+ if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
+ pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
+ __func__, __clk_get_name(hw->clk));
+ return;
+ }
+
+ ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk);
+}
+
static void __init of_ti_clockdomain_setup(struct device_node *node)
{
struct clk *clk;
diff --git a/drivers/clk/ti/dpll3xxx.c b/drivers/clk/ti/dpll3xxx.c
new file mode 100644
index 000000000000..b0aa87b35f24
--- /dev/null
+++ b/drivers/clk/ti/dpll3xxx.c
@@ -0,0 +1,820 @@
+/*
+ * OMAP3/4 - specific DPLL control functions
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ * Testing and integration fixes by Jouni Högander
+ *
+ * 36xx support added by Vishwanath BS, Richard Woodruff, and Nishanth
+ * Menon
+ *
+ * Parts of this code are based on code written by
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/clkdev.h>
+#include <linux/clk/ti.h>
+
+#include "clock.h"
+
+/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
+#define DPLL_AUTOIDLE_DISABLE 0x0
+#define DPLL_AUTOIDLE_LOW_POWER_STOP 0x1
+
+#define MAX_DPLL_WAIT_TRIES 1000000
+
+#define OMAP3XXX_EN_DPLL_LOCKED 0x7
+
+/* Forward declarations */
+static u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk);
+static void omap3_dpll_deny_idle(struct clk_hw_omap *clk);
+static void omap3_dpll_allow_idle(struct clk_hw_omap *clk);
+
+/* Private functions */
+
+/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
+static void _omap3_dpll_write_clken(struct clk_hw_omap *clk, u8 clken_bits)
+{
+ const struct dpll_data *dd;
+ u32 v;
+
+ dd = clk->dpll_data;
+
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+ v &= ~dd->enable_mask;
+ v |= clken_bits << __ffs(dd->enable_mask);
+ ti_clk_ll_ops->clk_writel(v, dd->control_reg);
+}
+
+/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
+static int _omap3_wait_dpll_status(struct clk_hw_omap *clk, u8 state)
+{
+ const struct dpll_data *dd;
+ int i = 0;
+ int ret = -EINVAL;
+ const char *clk_name;
+
+ dd = clk->dpll_data;
+ clk_name = __clk_get_name(clk->hw.clk);
+
+ state <<= __ffs(dd->idlest_mask);
+
+ while (((ti_clk_ll_ops->clk_readl(dd->idlest_reg) & dd->idlest_mask)
+ != state) && i < MAX_DPLL_WAIT_TRIES) {
+ i++;
+ udelay(1);
+ }
+
+ if (i == MAX_DPLL_WAIT_TRIES) {
+ pr_err("clock: %s failed transition to '%s'\n",
+ clk_name, (state) ? "locked" : "bypassed");
+ } else {
+ pr_debug("clock: %s transition to '%s' in %d loops\n",
+ clk_name, (state) ? "locked" : "bypassed", i);
+
+ ret = 0;
+ }
+
+ return ret;
+}
+
+/* From 3430 TRM ES2 4.7.6.2 */
+static u16 _omap3_dpll_compute_freqsel(struct clk_hw_omap *clk, u8 n)
+{
+ unsigned long fint;
+ u16 f = 0;
+
+ fint = __clk_get_rate(clk->dpll_data->clk_ref) / n;
+
+ pr_debug("clock: fint is %lu\n", fint);
+
+ if (fint >= 750000 && fint <= 1000000)
+ f = 0x3;
+ else if (fint > 1000000 && fint <= 1250000)
+ f = 0x4;
+ else if (fint > 1250000 && fint <= 1500000)
+ f = 0x5;
+ else if (fint > 1500000 && fint <= 1750000)
+ f = 0x6;
+ else if (fint > 1750000 && fint <= 2100000)
+ f = 0x7;
+ else if (fint > 7500000 && fint <= 10000000)
+ f = 0xB;
+ else if (fint > 10000000 && fint <= 12500000)
+ f = 0xC;
+ else if (fint > 12500000 && fint <= 15000000)
+ f = 0xD;
+ else if (fint > 15000000 && fint <= 17500000)
+ f = 0xE;
+ else if (fint > 17500000 && fint <= 21000000)
+ f = 0xF;
+ else
+ pr_debug("clock: unknown freqsel setting for %d\n", n);
+
+ return f;
+}
+
+/*
+ * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to lock. Waits for the DPLL to report
+ * readiness before returning. Will save and restore the DPLL's
+ * autoidle state across the enable, per the CDP code. If the DPLL
+ * locked successfully, return 0; if the DPLL did not lock in the time
+ * allotted, or DPLL3 was passed in, return -EINVAL.
+ */
+static int _omap3_noncore_dpll_lock(struct clk_hw_omap *clk)
+{
+ const struct dpll_data *dd;
+ u8 ai;
+ u8 state = 1;
+ int r = 0;
+
+ pr_debug("clock: locking DPLL %s\n", __clk_get_name(clk->hw.clk));
+
+ dd = clk->dpll_data;
+ state <<= __ffs(dd->idlest_mask);
+
+ /* Check if already locked */
+ if ((ti_clk_ll_ops->clk_readl(dd->idlest_reg) & dd->idlest_mask) ==
+ state)
+ goto done;
+
+ ai = omap3_dpll_autoidle_read(clk);
+
+ if (ai)
+ omap3_dpll_deny_idle(clk);
+
+ _omap3_dpll_write_clken(clk, DPLL_LOCKED);
+
+ r = _omap3_wait_dpll_status(clk, 1);
+
+ if (ai)
+ omap3_dpll_allow_idle(clk);
+
+done:
+ return r;
+}
+
+/*
+ * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power bypass mode. In
+ * bypass mode, the DPLL's rate is set equal to its parent clock's
+ * rate. Waits for the DPLL to report readiness before returning.
+ * Will save and restore the DPLL's autoidle state across the enable,
+ * per the CDP code. If the DPLL entered bypass mode successfully,
+ * return 0; if the DPLL did not enter bypass in the time allotted, or
+ * DPLL3 was passed in, or the DPLL does not support low-power bypass,
+ * return -EINVAL.
+ */
+static int _omap3_noncore_dpll_bypass(struct clk_hw_omap *clk)
+{
+ int r;
+ u8 ai;
+
+ if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS)))
+ return -EINVAL;
+
+ pr_debug("clock: configuring DPLL %s for low-power bypass\n",
+ __clk_get_name(clk->hw.clk));
+
+ ai = omap3_dpll_autoidle_read(clk);
+
+ _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS);
+
+ r = _omap3_wait_dpll_status(clk, 0);
+
+ if (ai)
+ omap3_dpll_allow_idle(clk);
+
+ return r;
+}
+
+/*
+ * _omap3_noncore_dpll_stop - instruct a DPLL to stop
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power stop. Will save and
+ * restore the DPLL's autoidle state across the stop, per the CDP
+ * code. If DPLL3 was passed in, or the DPLL does not support
+ * low-power stop, return -EINVAL; otherwise, return 0.
+ */
+static int _omap3_noncore_dpll_stop(struct clk_hw_omap *clk)
+{
+ u8 ai;
+
+ if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
+ return -EINVAL;
+
+ pr_debug("clock: stopping DPLL %s\n", __clk_get_name(clk->hw.clk));
+
+ ai = omap3_dpll_autoidle_read(clk);
+
+ _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP);
+
+ if (ai)
+ omap3_dpll_allow_idle(clk);
+
+ return 0;
+}
+
+/**
+ * _lookup_dco - Lookup DCO used by j-type DPLL
+ * @clk: pointer to a DPLL struct clk
+ * @dco: digital control oscillator selector
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ *
+ * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
+ *
+ * XXX This code is not needed for 3430/AM35xx; can it be optimized
+ * out in non-multi-OMAP builds for those chips?
+ */
+static void _lookup_dco(struct clk_hw_omap *clk, u8 *dco, u16 m, u8 n)
+{
+ unsigned long fint, clkinp; /* watch out for overflow */
+
+ clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk));
+ fint = (clkinp / n) * m;
+
+ if (fint < 1000000000)
+ *dco = 2;
+ else
+ *dco = 4;
+}
+
+/**
+ * _lookup_sddiv - Calculate sigma delta divider for j-type DPLL
+ * @clk: pointer to a DPLL struct clk
+ * @sd_div: target sigma-delta divider
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ *
+ * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
+ *
+ * XXX This code is not needed for 3430/AM35xx; can it be optimized
+ * out in non-multi-OMAP builds for those chips?
+ */
+static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n)
+{
+ unsigned long clkinp, sd; /* watch out for overflow */
+ int mod1, mod2;
+
+ clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk));
+
+ /*
+ * target sigma-delta to near 250MHz
+ * sd = ceil[(m/(n+1)) * (clkinp_MHz / 250)]
+ */
+ clkinp /= 100000; /* shift from MHz to 10*Hz for 38.4 and 19.2 */
+ mod1 = (clkinp * m) % (250 * n);
+ sd = (clkinp * m) / (250 * n);
+ mod2 = sd % 10;
+ sd /= 10;
+
+ if (mod1 || mod2)
+ sd++;
+ *sd_div = sd;
+}
+
+/*
+ * _omap3_noncore_dpll_program - set non-core DPLL M,N values directly
+ * @clk: struct clk * of DPLL to set
+ * @freqsel: FREQSEL value to set
+ *
+ * Program the DPLL with the last M, N values calculated, and wait for
+ * the DPLL to lock. Returns -EINVAL upon error, or 0 upon success.
+ */
+static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
+{
+ struct dpll_data *dd = clk->dpll_data;
+ u8 dco, sd_div;
+ u32 v;
+
+ /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
+ _omap3_noncore_dpll_bypass(clk);
+
+ /*
+ * Set jitter correction. Jitter correction applicable for OMAP343X
+ * only since freqsel field is no longer present on other devices.
+ */
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+ v &= ~dd->freqsel_mask;
+ v |= freqsel << __ffs(dd->freqsel_mask);
+ ti_clk_ll_ops->clk_writel(v, dd->control_reg);
+ }
+
+ /* Set DPLL multiplier, divider */
+ v = ti_clk_ll_ops->clk_readl(dd->mult_div1_reg);
+
+ /* Handle Duty Cycle Correction */
+ if (dd->dcc_mask) {
+ if (dd->last_rounded_rate >= dd->dcc_rate)
+ v |= dd->dcc_mask; /* Enable DCC */
+ else
+ v &= ~dd->dcc_mask; /* Disable DCC */
+ }
+
+ v &= ~(dd->mult_mask | dd->div1_mask);
+ v |= dd->last_rounded_m << __ffs(dd->mult_mask);
+ v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask);
+
+ /* Configure dco and sd_div for dplls that have these fields */
+ if (dd->dco_mask) {
+ _lookup_dco(clk, &dco, dd->last_rounded_m, dd->last_rounded_n);
+ v &= ~(dd->dco_mask);
+ v |= dco << __ffs(dd->dco_mask);
+ }
+ if (dd->sddiv_mask) {
+ _lookup_sddiv(clk, &sd_div, dd->last_rounded_m,
+ dd->last_rounded_n);
+ v &= ~(dd->sddiv_mask);
+ v |= sd_div << __ffs(dd->sddiv_mask);
+ }
+
+ ti_clk_ll_ops->clk_writel(v, dd->mult_div1_reg);
+
+ /* Set 4X multiplier and low-power mode */
+ if (dd->m4xen_mask || dd->lpmode_mask) {
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+
+ if (dd->m4xen_mask) {
+ if (dd->last_rounded_m4xen)
+ v |= dd->m4xen_mask;
+ else
+ v &= ~dd->m4xen_mask;
+ }
+
+ if (dd->lpmode_mask) {
+ if (dd->last_rounded_lpmode)
+ v |= dd->lpmode_mask;
+ else
+ v &= ~dd->lpmode_mask;
+ }
+
+ ti_clk_ll_ops->clk_writel(v, dd->control_reg);
+ }
+
+ /* We let the clock framework set the other output dividers later */
+
+ /* REVISIT: Set ramp-up delay? */
+
+ _omap3_noncore_dpll_lock(clk);
+
+ return 0;
+}
+
+/* Public functions */
+
+/**
+ * omap3_dpll_recalc - recalculate DPLL rate
+ * @clk: DPLL struct clk
+ *
+ * Recalculate and propagate the DPLL rate.
+ */
+unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+
+ return omap2_get_dpll_rate(clk);
+}
+
+/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
+
+/**
+ * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
+ * The choice of modes depends on the DPLL's programmed rate: if it is
+ * the same as the DPLL's parent clock, it will enter bypass;
+ * otherwise, it will enter lock. This code will wait for the DPLL to
+ * indicate readiness before returning, unless the DPLL takes too long
+ * to enter the target state. Intended to be used as the struct clk's
+ * enable function. If DPLL3 was passed in, or the DPLL does not
+ * support low-power stop, or if the DPLL took too long to enter
+ * bypass or lock, return -EINVAL; otherwise, return 0.
+ */
+int omap3_noncore_dpll_enable(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ int r;
+ struct dpll_data *dd;
+ struct clk_hw *parent;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (clk->clkdm) {
+ r = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk);
+ if (r) {
+ WARN(1,
+ "%s: could not enable %s's clockdomain %s: %d\n",
+ __func__, __clk_get_name(hw->clk),
+ clk->clkdm_name, r);
+ return r;
+ }
+ }
+
+ parent = __clk_get_hw(__clk_get_parent(hw->clk));
+
+ if (__clk_get_rate(hw->clk) == __clk_get_rate(dd->clk_bypass)) {
+ WARN_ON(parent != __clk_get_hw(dd->clk_bypass));
+ r = _omap3_noncore_dpll_bypass(clk);
+ } else {
+ WARN_ON(parent != __clk_get_hw(dd->clk_ref));
+ r = _omap3_noncore_dpll_lock(clk);
+ }
+
+ return r;
+}
+
+/**
+ * omap3_noncore_dpll_disable - instruct a DPLL to enter low-power stop
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power stop. This function is
+ * intended for use in struct clkops. No return value.
+ */
+void omap3_noncore_dpll_disable(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+
+ _omap3_noncore_dpll_stop(clk);
+ if (clk->clkdm)
+ ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk);
+}
+
+/* Non-CORE DPLL rate set code */
+
+/**
+ * omap3_noncore_dpll_determine_rate - determine rate for a DPLL
+ * @hw: pointer to the clock to determine rate for
+ * @req: target rate request
+ *
+ * Determines which DPLL mode to use for reaching a desired target rate.
+ * Checks whether the DPLL shall be in bypass or locked mode, and if
+ * locked, calculates the M,N values for the DPLL via round-rate.
+ * Returns a 0 on success, negative error value in failure.
+ */
+int omap3_noncore_dpll_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ struct dpll_data *dd;
+
+ if (!req->rate)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (__clk_get_rate(dd->clk_bypass) == req->rate &&
+ (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
+ req->best_parent_hw = __clk_get_hw(dd->clk_bypass);
+ } else {
+ req->rate = omap2_dpll_round_rate(hw, req->rate,
+ &req->best_parent_rate);
+ req->best_parent_hw = __clk_get_hw(dd->clk_ref);
+ }
+
+ req->best_parent_rate = req->rate;
+
+ return 0;
+}
+
+/**
+ * omap3_noncore_dpll_set_parent - set parent for a DPLL clock
+ * @hw: pointer to the clock to set parent for
+ * @index: parent index to select
+ *
+ * Sets parent for a DPLL clock. This sets the DPLL into bypass or
+ * locked mode. Returns 0 with success, negative error value otherwise.
+ */
+int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ int ret;
+
+ if (!hw)
+ return -EINVAL;
+
+ if (index)
+ ret = _omap3_noncore_dpll_bypass(clk);
+ else
+ ret = _omap3_noncore_dpll_lock(clk);
+
+ return ret;
+}
+
+/**
+ * omap3_noncore_dpll_set_rate - set rate for a DPLL clock
+ * @hw: pointer to the clock to set parent for
+ * @rate: target rate for the clock
+ * @parent_rate: rate of the parent clock
+ *
+ * Sets rate for a DPLL clock. First checks if the clock parent is
+ * reference clock (in bypass mode, the rate of the clock can't be
+ * changed) and proceeds with the rate change operation. Returns 0
+ * with success, negative error value otherwise.
+ */
+int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ struct dpll_data *dd;
+ u16 freqsel = 0;
+ int ret;
+
+ if (!hw || !rate)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (__clk_get_hw(__clk_get_parent(hw->clk)) !=
+ __clk_get_hw(dd->clk_ref))
+ return -EINVAL;
+
+ if (dd->last_rounded_rate == 0)
+ return -EINVAL;
+
+ /* Freqsel is available only on OMAP343X devices */
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
+ freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
+ WARN_ON(!freqsel);
+ }
+
+ pr_debug("%s: %s: set rate: locking rate to %lu.\n", __func__,
+ __clk_get_name(hw->clk), rate);
+
+ ret = omap3_noncore_dpll_program(clk, freqsel);
+
+ return ret;
+}
+
+/**
+ * omap3_noncore_dpll_set_rate_and_parent - set rate and parent for a DPLL clock
+ * @hw: pointer to the clock to set rate and parent for
+ * @rate: target rate for the DPLL
+ * @parent_rate: clock rate of the DPLL parent
+ * @index: new parent index for the DPLL, 0 - reference, 1 - bypass
+ *
+ * Sets rate and parent for a DPLL clock. If new parent is the bypass
+ * clock, only selects the parent. Otherwise proceeds with a rate
+ * change, as this will effectively also change the parent as the
+ * DPLL is put into locked mode. Returns 0 with success, negative error
+ * value otherwise.
+ */
+int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate,
+ u8 index)
+{
+ int ret;
+
+ if (!hw || !rate)
+ return -EINVAL;
+
+ /*
+ * clk-ref at index[0], in which case we only need to set rate,
+ * the parent will be changed automatically with the lock sequence.
+ * With clk-bypass case we only need to change parent.
+ */
+ if (index)
+ ret = omap3_noncore_dpll_set_parent(hw, index);
+ else
+ ret = omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
+
+ return ret;
+}
+
+/* DPLL autoidle read/set code */
+
+/**
+ * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
+ * @clk: struct clk * of the DPLL to read
+ *
+ * Return the DPLL's autoidle bits, shifted down to bit 0. Returns
+ * -EINVAL if passed a null pointer or if the struct clk does not
+ * appear to refer to a DPLL.
+ */
+static u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk)
+{
+ const struct dpll_data *dd;
+ u32 v;
+
+ if (!clk || !clk->dpll_data)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+
+ if (!dd->autoidle_reg)
+ return -EINVAL;
+
+ v = ti_clk_ll_ops->clk_readl(dd->autoidle_reg);
+ v &= dd->autoidle_mask;
+ v >>= __ffs(dd->autoidle_mask);
+
+ return v;
+}
+
+/**
+ * omap3_dpll_allow_idle - enable DPLL autoidle bits
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Enable DPLL automatic idle control. This automatic idle mode
+ * switching takes effect only when the DPLL is locked, at least on
+ * OMAP3430. The DPLL will enter low-power stop when its downstream
+ * clocks are gated. No return value.
+ */
+static void omap3_dpll_allow_idle(struct clk_hw_omap *clk)
+{
+ const struct dpll_data *dd;
+ u32 v;
+
+ if (!clk || !clk->dpll_data)
+ return;
+
+ dd = clk->dpll_data;
+
+ if (!dd->autoidle_reg)
+ return;
+
+ /*
+ * REVISIT: CORE DPLL can optionally enter low-power bypass
+ * by writing 0x5 instead of 0x1. Add some mechanism to
+ * optionally enter this mode.
+ */
+ v = ti_clk_ll_ops->clk_readl(dd->autoidle_reg);
+ v &= ~dd->autoidle_mask;
+ v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
+ ti_clk_ll_ops->clk_writel(v, dd->autoidle_reg);
+}
+
+/**
+ * omap3_dpll_deny_idle - prevent DPLL from automatically idling
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Disable DPLL automatic idle control. No return value.
+ */
+static void omap3_dpll_deny_idle(struct clk_hw_omap *clk)
+{
+ const struct dpll_data *dd;
+ u32 v;
+
+ if (!clk || !clk->dpll_data)
+ return;
+
+ dd = clk->dpll_data;
+
+ if (!dd->autoidle_reg)
+ return;
+
+ v = ti_clk_ll_ops->clk_readl(dd->autoidle_reg);
+ v &= ~dd->autoidle_mask;
+ v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
+ ti_clk_ll_ops->clk_writel(v, dd->autoidle_reg);
+}
+
+/* Clock control for DPLL outputs */
+
+/* Find the parent DPLL for the given clkoutx2 clock */
+static struct clk_hw_omap *omap3_find_clkoutx2_dpll(struct clk_hw *hw)
+{
+ struct clk_hw_omap *pclk = NULL;
+ struct clk *parent;
+
+ /* Walk up the parents of clk, looking for a DPLL */
+ do {
+ do {
+ parent = __clk_get_parent(hw->clk);
+ hw = __clk_get_hw(parent);
+ } while (hw && (__clk_get_flags(hw->clk) & CLK_IS_BASIC));
+ if (!hw)
+ break;
+ pclk = to_clk_hw_omap(hw);
+ } while (pclk && !pclk->dpll_data);
+
+ /* clk does not have a DPLL as a parent? error in the clock data */
+ if (!pclk) {
+ WARN_ON(1);
+ return NULL;
+ }
+
+ return pclk;
+}
+
+/**
+ * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
+ * @clk: DPLL output struct clk
+ *
+ * Using parent clock DPLL data, look up DPLL state. If locked, set our
+ * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
+ */
+unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ const struct dpll_data *dd;
+ unsigned long rate;
+ u32 v;
+ struct clk_hw_omap *pclk = NULL;
+
+ if (!parent_rate)
+ return 0;
+
+ pclk = omap3_find_clkoutx2_dpll(hw);
+
+ if (!pclk)
+ return 0;
+
+ dd = pclk->dpll_data;
+
+ WARN_ON(!dd->enable_mask);
+
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg) & dd->enable_mask;
+ v >>= __ffs(dd->enable_mask);
+ if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE))
+ rate = parent_rate;
+ else
+ rate = parent_rate * 2;
+ return rate;
+}
+
+/* OMAP3/4 non-CORE DPLL clkops */
+const struct clk_hw_omap_ops clkhwops_omap3_dpll = {
+ .allow_idle = omap3_dpll_allow_idle,
+ .deny_idle = omap3_dpll_deny_idle,
+};
+
+/**
+ * omap3_dpll4_set_rate - set rate for omap3 per-dpll
+ * @hw: clock to change
+ * @rate: target rate for clock
+ * @parent_rate: rate of the parent clock
+ *
+ * Check if the current SoC supports the per-dpll reprogram operation
+ * or not, and then do the rate change if supported. Returns -EINVAL
+ * if not supported, 0 for success, and potential error codes from the
+ * clock rate change.
+ */
+int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ /*
+ * According to the 12-5 CDP code from TI, "Limitation 2.5"
+ * on 3430ES1 prevents us from changing DPLL multipliers or dividers
+ * on DPLL4.
+ */
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+ pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
+ return -EINVAL;
+ }
+
+ return omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
+}
+
+/**
+ * omap3_dpll4_set_rate_and_parent - set rate and parent for omap3 per-dpll
+ * @hw: clock to change
+ * @rate: target rate for clock
+ * @parent_rate: rate of the parent clock
+ * @index: parent index, 0 - reference clock, 1 - bypass clock
+ *
+ * Check if the current SoC support the per-dpll reprogram operation
+ * or not, and then do the rate + parent change if supported. Returns
+ * -EINVAL if not supported, 0 for success, and potential error codes
+ * from the clock rate change.
+ */
+int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate, u8 index)
+{
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+ pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
+ return -EINVAL;
+ }
+
+ return omap3_noncore_dpll_set_rate_and_parent(hw, rate, parent_rate,
+ index);
+}
diff --git a/drivers/clk/ti/dpll44xx.c b/drivers/clk/ti/dpll44xx.c
new file mode 100644
index 000000000000..73af77a90586
--- /dev/null
+++ b/drivers/clk/ti/dpll44xx.c
@@ -0,0 +1,227 @@
+/*
+ * OMAP4-specific DPLL control functions
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Rajendra Nayak
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/clk/ti.h>
+
+#include "clock.h"
+
+/*
+ * Maximum DPLL input frequency (FINT) and output frequency (FOUT) that
+ * can supported when using the DPLL low-power mode. Frequencies are
+ * defined in OMAP4430/60 Public TRM section 3.6.3.3.2 "Enable Control,
+ * Status, and Low-Power Operation Mode".
+ */
+#define OMAP4_DPLL_LP_FINT_MAX 1000000
+#define OMAP4_DPLL_LP_FOUT_MAX 100000000
+
+/*
+ * Bitfield declarations
+ */
+#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK BIT(8)
+#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK BIT(10)
+#define OMAP4430_DPLL_REGM4XEN_MASK BIT(11)
+
+/* Static rate multiplier for OMAP4 REGM4XEN clocks */
+#define OMAP4430_REGM4XEN_MULT 4
+
+static void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk)
+{
+ u32 v;
+ u32 mask;
+
+ if (!clk || !clk->clksel_reg)
+ return;
+
+ mask = clk->flags & CLOCK_CLKOUTX2 ?
+ OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
+ OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
+
+ v = ti_clk_ll_ops->clk_readl(clk->clksel_reg);
+ /* Clear the bit to allow gatectrl */
+ v &= ~mask;
+ ti_clk_ll_ops->clk_writel(v, clk->clksel_reg);
+}
+
+static void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk)
+{
+ u32 v;
+ u32 mask;
+
+ if (!clk || !clk->clksel_reg)
+ return;
+
+ mask = clk->flags & CLOCK_CLKOUTX2 ?
+ OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
+ OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
+
+ v = ti_clk_ll_ops->clk_readl(clk->clksel_reg);
+ /* Set the bit to deny gatectrl */
+ v |= mask;
+ ti_clk_ll_ops->clk_writel(v, clk->clksel_reg);
+}
+
+const struct clk_hw_omap_ops clkhwops_omap4_dpllmx = {
+ .allow_idle = omap4_dpllmx_allow_gatectrl,
+ .deny_idle = omap4_dpllmx_deny_gatectrl,
+};
+
+/**
+ * omap4_dpll_lpmode_recalc - compute DPLL low-power setting
+ * @dd: pointer to the dpll data structure
+ *
+ * Calculates if low-power mode can be enabled based upon the last
+ * multiplier and divider values calculated. If low-power mode can be
+ * enabled, then the bit to enable low-power mode is stored in the
+ * last_rounded_lpmode variable. This implementation is based upon the
+ * criteria for enabling low-power mode as described in the OMAP4430/60
+ * Public TRM section 3.6.3.3.2 "Enable Control, Status, and Low-Power
+ * Operation Mode".
+ */
+static void omap4_dpll_lpmode_recalc(struct dpll_data *dd)
+{
+ long fint, fout;
+
+ fint = __clk_get_rate(dd->clk_ref) / (dd->last_rounded_n + 1);
+ fout = fint * dd->last_rounded_m;
+
+ if ((fint < OMAP4_DPLL_LP_FINT_MAX) && (fout < OMAP4_DPLL_LP_FOUT_MAX))
+ dd->last_rounded_lpmode = 1;
+ else
+ dd->last_rounded_lpmode = 0;
+}
+
+/**
+ * omap4_dpll_regm4xen_recalc - compute DPLL rate, considering REGM4XEN bit
+ * @clk: struct clk * of the DPLL to compute the rate for
+ *
+ * Compute the output rate for the OMAP4 DPLL represented by @clk.
+ * Takes the REGM4XEN bit into consideration, which is needed for the
+ * OMAP4 ABE DPLL. Returns the DPLL's output rate (before M-dividers)
+ * upon success, or 0 upon error.
+ */
+unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ u32 v;
+ unsigned long rate;
+ struct dpll_data *dd;
+
+ if (!clk || !clk->dpll_data)
+ return 0;
+
+ dd = clk->dpll_data;
+
+ rate = omap2_get_dpll_rate(clk);
+
+ /* regm4xen adds a multiplier of 4 to DPLL calculations */
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+ if (v & OMAP4430_DPLL_REGM4XEN_MASK)
+ rate *= OMAP4430_REGM4XEN_MULT;
+
+ return rate;
+}
+
+/**
+ * omap4_dpll_regm4xen_round_rate - round DPLL rate, considering REGM4XEN bit
+ * @clk: struct clk * of the DPLL to round a rate for
+ * @target_rate: the desired rate of the DPLL
+ *
+ * Compute the rate that would be programmed into the DPLL hardware
+ * for @clk if set_rate() were to be provided with the rate
+ * @target_rate. Takes the REGM4XEN bit into consideration, which is
+ * needed for the OMAP4 ABE DPLL. Returns the rounded rate (before
+ * M-dividers) upon success, -EINVAL if @clk is null or not a DPLL, or
+ * ~0 if an error occurred in omap2_dpll_round_rate().
+ */
+long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
+ unsigned long target_rate,
+ unsigned long *parent_rate)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ struct dpll_data *dd;
+ long r;
+
+ if (!clk || !clk->dpll_data)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+
+ dd->last_rounded_m4xen = 0;
+
+ /*
+ * First try to compute the DPLL configuration for
+ * target rate without using the 4X multiplier.
+ */
+ r = omap2_dpll_round_rate(hw, target_rate, NULL);
+ if (r != ~0)
+ goto out;
+
+ /*
+ * If we did not find a valid DPLL configuration, try again, but
+ * this time see if using the 4X multiplier can help. Enabling the
+ * 4X multiplier is equivalent to dividing the target rate by 4.
+ */
+ r = omap2_dpll_round_rate(hw, target_rate / OMAP4430_REGM4XEN_MULT,
+ NULL);
+ if (r == ~0)
+ return r;
+
+ dd->last_rounded_rate *= OMAP4430_REGM4XEN_MULT;
+ dd->last_rounded_m4xen = 1;
+
+out:
+ omap4_dpll_lpmode_recalc(dd);
+
+ return dd->last_rounded_rate;
+}
+
+/**
+ * omap4_dpll_regm4xen_determine_rate - determine rate for a DPLL
+ * @hw: pointer to the clock to determine rate for
+ * @req: target rate request
+ *
+ * Determines which DPLL mode to use for reaching a desired rate.
+ * Checks whether the DPLL shall be in bypass or locked mode, and if
+ * locked, calculates the M,N values for the DPLL via round-rate.
+ * Returns 0 on success and a negative error value otherwise.
+ */
+int omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ struct dpll_data *dd;
+
+ if (!req->rate)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (__clk_get_rate(dd->clk_bypass) == req->rate &&
+ (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
+ req->best_parent_hw = __clk_get_hw(dd->clk_bypass);
+ } else {
+ req->rate = omap4_dpll_regm4xen_round_rate(hw, req->rate,
+ &req->best_parent_rate);
+ req->best_parent_hw = __clk_get_hw(dd->clk_ref);
+ }
+
+ req->best_parent_rate = req->rate;
+
+ return 0;
+}
diff --git a/drivers/clk/ti/fixed-factor.c b/drivers/clk/ti/fixed-factor.c
index c2c8a287408c..3cd406768909 100644
--- a/drivers/clk/ti/fixed-factor.c
+++ b/drivers/clk/ti/fixed-factor.c
@@ -22,6 +22,8 @@
#include <linux/of_address.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
#undef pr_fmt
#define pr_fmt(fmt) "%s: " fmt, __func__
OpenPOWER on IntegriCloud