summaryrefslogtreecommitdiffstats
path: root/drivers/char/tpm/tpm_tis.c
diff options
context:
space:
mode:
authorStefan Berger <stefanb@linux.vnet.ibm.com>2011-03-30 12:13:30 -0400
committerRajiv Andrade <srajiv@linux.vnet.ibm.com>2011-07-12 18:53:08 -0300
commit45baa1d1fa3926510ead93c96e6b0baa5ad79bd3 (patch)
treeaa90dcb72b808efc5392aba368ad60a07f58d587 /drivers/char/tpm/tpm_tis.c
parent5a79444f24cb169b79f0f346482a42ab28329bae (diff)
downloadblackbird-op-linux-45baa1d1fa3926510ead93c96e6b0baa5ad79bd3.tar.gz
blackbird-op-linux-45baa1d1fa3926510ead93c96e6b0baa5ad79bd3.zip
tpm_tis: Re-enable interrupts upon (S3) resume
This patch makes sure that if the TPM TIS interface is run in interrupt mode (rather than polling mode) that all interrupts are enabled in the TPM's interrupt enable register after a resume from ACPI S3 suspend. The registers may either have been cleared by the TPM loosing its state during device sleep or by the BIOS leaving the TPM in polling mode (after sending a command to the TPM for starting it up again) You may want to check if your TPM runs with interrupts by doing cat /proc/interrupts | grep -i tpm and see whether there is an entry or otherwise for it to use interrupts: modprobe tpm_tis interrupts=1 [add 'itpm=1' for Intel TPM ] v2: - the patch was adapted to work with the pnp and platform driver implementations in tpm_tis.c Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Diffstat (limited to 'drivers/char/tpm/tpm_tis.c')
-rw-r--r--drivers/char/tpm/tpm_tis.c30
1 files changed, 30 insertions, 0 deletions
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index a84108cd932f..88de8fc41586 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -649,11 +649,36 @@ static int tpm_tis_pnp_suspend(struct pnp_dev *dev, pm_message_t msg)
return tpm_pm_suspend(&dev->dev, msg);
}
+static void tpm_tis_reenable_interrupts(struct tpm_chip *chip)
+{
+ u32 intmask;
+
+ /* reenable interrupts that device may have lost or
+ BIOS/firmware may have disabled */
+ iowrite8(chip->vendor.irq, chip->vendor.iobase +
+ TPM_INT_VECTOR(chip->vendor.locality));
+
+ intmask =
+ ioread32(chip->vendor.iobase +
+ TPM_INT_ENABLE(chip->vendor.locality));
+
+ intmask |= TPM_INTF_CMD_READY_INT
+ | TPM_INTF_LOCALITY_CHANGE_INT | TPM_INTF_DATA_AVAIL_INT
+ | TPM_INTF_STS_VALID_INT | TPM_GLOBAL_INT_ENABLE;
+
+ iowrite32(intmask,
+ chip->vendor.iobase + TPM_INT_ENABLE(chip->vendor.locality));
+}
+
+
static int tpm_tis_pnp_resume(struct pnp_dev *dev)
{
struct tpm_chip *chip = pnp_get_drvdata(dev);
int ret;
+ if (chip->vendor.irq)
+ tpm_tis_reenable_interrupts(chip);
+
ret = tpm_pm_resume(&dev->dev);
if (!ret)
tpm_continue_selftest(chip);
@@ -706,6 +731,11 @@ static int tpm_tis_suspend(struct platform_device *dev, pm_message_t msg)
static int tpm_tis_resume(struct platform_device *dev)
{
+ struct tpm_chip *chip = dev_get_drvdata(&dev->dev);
+
+ if (chip->vendor.irq)
+ tpm_tis_reenable_interrupts(chip);
+
return tpm_pm_resume(&dev->dev);
}
static struct platform_driver tis_drv = {
OpenPOWER on IntegriCloud