summaryrefslogtreecommitdiffstats
path: root/drivers/bus
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2019-09-03 22:44:04 +0200
committerArnd Bergmann <arnd@arndb.de>2019-09-03 22:44:04 +0200
commitbff00fdf03b0cba4219cca6e0c2a59cd701aec36 (patch)
tree761ce0e0b1fdc09cd574e734fb8a33b281e582be /drivers/bus
parent87288375bb11f469408c0c2c2bc0f00d0fea2876 (diff)
parent968c6f4b3c21e9fae9b49cc91214a01b4827625d (diff)
downloadblackbird-op-linux-bff00fdf03b0cba4219cca6e0c2a59cd701aec36.tar.gz
blackbird-op-linux-bff00fdf03b0cba4219cca6e0c2a59cd701aec36.zip
Merge tag 'imx-drivers-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers update for 5.4: - A series from Anson Huang to add UID support for i.MX8 SoC and SCU drivers. - A series from Daniel Baluta to add DSP IPC driver for communication between host AP (Linux) and the firmware running on DSP embedded in i.MX8 SoCs. - A small fix for GPCv2 error code printing. - Switch from module_platform_driver_probe() to module_platform_driver() for imx-weim driver, as we need the driver to probe again when device is present later. - Add optional burst clock mode support for imx-weim driver. * tag 'imx-drivers-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: gpcv2: Print the correct error code bus: imx-weim: use module_platform_driver() firmware: imx: Add DSP IPC protocol interface soc: imx-scu: Add SoC UID(unique identifier) support bus: imx-weim: optionally enable burst clock mode firmware: imx: scu-pd: Add IRQSTR_DSP PD range firmware: imx: scu-pd: Add mu13 b side PD range firmware: imx: scu-pd: Rename mu PD range to mu_a soc: imx8: Add i.MX8MM UID(unique identifier) support soc: imx8: Add i.MX8MQ UID(unique identifier) support Link: https://lore.kernel.org/r/20190825153237.28829-1-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'drivers/bus')
-rw-r--r--drivers/bus/imx-weim.c24
1 files changed, 20 insertions, 4 deletions
diff --git a/drivers/bus/imx-weim.c b/drivers/bus/imx-weim.c
index db74334ca5ef..79af0c27f5a3 100644
--- a/drivers/bus/imx-weim.c
+++ b/drivers/bus/imx-weim.c
@@ -19,6 +19,8 @@ struct imx_weim_devtype {
unsigned int cs_count;
unsigned int cs_regs_count;
unsigned int cs_stride;
+ unsigned int wcr_offset;
+ unsigned int wcr_bcm;
};
static const struct imx_weim_devtype imx1_weim_devtype = {
@@ -37,6 +39,8 @@ static const struct imx_weim_devtype imx50_weim_devtype = {
.cs_count = 4,
.cs_regs_count = 6,
.cs_stride = 0x18,
+ .wcr_offset = 0x90,
+ .wcr_bcm = BIT(0),
};
static const struct imx_weim_devtype imx51_weim_devtype = {
@@ -183,8 +187,7 @@ static int __init weim_timing_setup(struct device *dev,
return 0;
}
-static int __init weim_parse_dt(struct platform_device *pdev,
- void __iomem *base)
+static int weim_parse_dt(struct platform_device *pdev, void __iomem *base)
{
const struct of_device_id *of_id = of_match_device(weim_id_table,
&pdev->dev);
@@ -192,6 +195,7 @@ static int __init weim_parse_dt(struct platform_device *pdev,
struct device_node *child;
int ret, have_child = 0;
struct cs_timing_state ts = {};
+ u32 reg;
if (devtype == &imx50_weim_devtype) {
ret = imx_weim_gpr_setup(pdev);
@@ -199,6 +203,17 @@ static int __init weim_parse_dt(struct platform_device *pdev,
return ret;
}
+ if (of_property_read_bool(pdev->dev.of_node, "fsl,burst-clk-enable")) {
+ if (devtype->wcr_bcm) {
+ reg = readl(base + devtype->wcr_offset);
+ writel(reg | devtype->wcr_bcm,
+ base + devtype->wcr_offset);
+ } else {
+ dev_err(&pdev->dev, "burst clk mode not supported.\n");
+ return -EINVAL;
+ }
+ }
+
for_each_available_child_of_node(pdev->dev.of_node, child) {
ret = weim_timing_setup(&pdev->dev, child, base, devtype, &ts);
if (ret)
@@ -217,7 +232,7 @@ static int __init weim_parse_dt(struct platform_device *pdev,
return ret;
}
-static int __init weim_probe(struct platform_device *pdev)
+static int weim_probe(struct platform_device *pdev)
{
struct resource *res;
struct clk *clk;
@@ -254,8 +269,9 @@ static struct platform_driver weim_driver = {
.name = "imx-weim",
.of_match_table = weim_id_table,
},
+ .probe = weim_probe,
};
-module_platform_driver_probe(weim_driver, weim_probe);
+module_platform_driver(weim_driver);
MODULE_AUTHOR("Freescale Semiconductor Inc.");
MODULE_DESCRIPTION("i.MX EIM Controller Driver");
OpenPOWER on IntegriCloud