Merge tag 'v4.2-rc3' into next

Sync up with Linux 4.2-rc3 to bring in infrastructure (OF) pieces.

25 files changed, 2573 insertions, 524 deletions

diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 364f080768d0..2e777071e1dc 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -2,9 +2,21 @@
 menu "Bluetooth device drivers"
 	depends on BT
 
+config BT_INTEL
+	tristate
+
+config BT_BCM
+	tristate
+	select FW_LOADER
+
+config BT_RTL
+	tristate
+	select FW_LOADER
+
 config BT_HCIBTUSB
 	tristate "HCI USB driver"
 	depends on USB
+	select BT_INTEL
 	help
 	  Bluetooth HCI USB driver.
 	  This driver is required if you want to use Bluetooth devices with
@@ -13,6 +25,28 @@ config BT_HCIBTUSB
 	  Say Y here to compile support for Bluetooth USB devices into the
 	  kernel or say M to compile it as module (btusb).
 
+config BT_HCIBTUSB_BCM
+	bool "Broadcom protocol support"
+	depends on BT_HCIBTUSB
+	select BT_BCM
+	default y
+	help
+	  The Broadcom protocol support enables firmware and patchram
+	  download support for Broadcom Bluetooth controllers.
+
+	  Say Y here to compile support for Broadcom protocol.
+
+config BT_HCIBTUSB_RTL
+	bool "Realtek protocol support"
+	depends on BT_HCIBTUSB
+	select BT_RTL
+	default y
+	help
+	  The Realtek protocol support enables firmware and configuration
+	  download support for Realtek Bluetooth controllers.
+
+	  Say Y here to compile support for Realtek protocol.
+
 config BT_HCIBTSDIO
 	tristate "HCI SDIO driver"
 	depends on MMC
@@ -62,6 +96,7 @@ config BT_HCIUART_BCSP
 config BT_HCIUART_ATH3K
 	bool "Atheros AR300x serial support"
 	depends on BT_HCIUART
+	select BT_HCIUART_H4
 	help
 	  HCIATH3K (HCI Atheros AR300x) is a serial protocol for
 	  communication between host and Atheros AR300x Bluetooth devices.
@@ -94,6 +129,27 @@ config BT_HCIUART_3WIRE
 
 	  Say Y here to compile support for Three-wire UART protocol.
 
+config BT_HCIUART_INTEL
+	bool "Intel protocol support"
+	depends on BT_HCIUART
+	select BT_INTEL
+	help
+	  The Intel protocol support enables Bluetooth HCI over serial
+	  port interface for Intel Bluetooth controllers.
+
+	  Say Y here to compile support for Intel protocol.
+
+config BT_HCIUART_BCM
+	bool "Broadcom protocol support"
+	depends on BT_HCIUART
+	select BT_HCIUART_H4
+	select BT_BCM
+	help
+	  The Broadcom protocol support enables Bluetooth HCI over serial
+	  port interface for Broadcom Bluetooth controllers.
+
+	  Say Y here to compile support for Broadcom protocol.
+
 config BT_HCIBCM203X
 	tristate "HCI BCM203x USB driver"
 	depends on USB
diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
index 9fe8a875a827..f40e194e7080 100644
--- a/drivers/bluetooth/Makefile
+++ b/drivers/bluetooth/Makefile
@@ -15,10 +15,13 @@ obj-$(CONFIG_BT_HCIBTUART)	+= btuart_cs.o
 obj-$(CONFIG_BT_HCIBTUSB)	+= btusb.o
 obj-$(CONFIG_BT_HCIBTSDIO)	+= btsdio.o
 
+obj-$(CONFIG_BT_INTEL)		+= btintel.o
 obj-$(CONFIG_BT_ATH3K)		+= ath3k.o
 obj-$(CONFIG_BT_MRVL)		+= btmrvl.o
 obj-$(CONFIG_BT_MRVL_SDIO)	+= btmrvl_sdio.o
 obj-$(CONFIG_BT_WILINK)		+= btwilink.o
+obj-$(CONFIG_BT_BCM)		+= btbcm.o
+obj-$(CONFIG_BT_RTL)		+= btrtl.o
 
 btmrvl-y			:= btmrvl_main.o
 btmrvl-$(CONFIG_DEBUG_FS)	+= btmrvl_debugfs.o
@@ -29,6 +32,8 @@ hci_uart-$(CONFIG_BT_HCIUART_BCSP)	+= hci_bcsp.o
 hci_uart-$(CONFIG_BT_HCIUART_LL)	+= hci_ll.o
 hci_uart-$(CONFIG_BT_HCIUART_ATH3K)	+= hci_ath.o
 hci_uart-$(CONFIG_BT_HCIUART_3WIRE)	+= hci_h5.o
+hci_uart-$(CONFIG_BT_HCIUART_INTEL)	+= hci_intel.o
+hci_uart-$(CONFIG_BT_HCIUART_BCM)	+= hci_bcm.o
 hci_uart-objs				:= $(hci_uart-y)
 
 ccflags-y += -D__CHECK_ENDIAN__
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index de4c8499cbac..e527a3e13939 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -65,6 +65,7 @@ static const struct usb_device_id ath3k_table[] = {
 	/* Atheros AR3011 with sflash firmware*/
 	{ USB_DEVICE(0x0489, 0xE027) },
 	{ USB_DEVICE(0x0489, 0xE03D) },
+	{ USB_DEVICE(0x04F2, 0xAFF1) },
 	{ USB_DEVICE(0x0930, 0x0215) },
 	{ USB_DEVICE(0x0CF3, 0x3002) },
 	{ USB_DEVICE(0x0CF3, 0xE019) },
@@ -79,6 +80,7 @@ static const struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x0489, 0xe057) },
 	{ USB_DEVICE(0x0489, 0xe056) },
 	{ USB_DEVICE(0x0489, 0xe05f) },
+	{ USB_DEVICE(0x0489, 0xe076) },
 	{ USB_DEVICE(0x0489, 0xe078) },
 	{ USB_DEVICE(0x04c5, 0x1330) },
 	{ USB_DEVICE(0x04CA, 0x3004) },
@@ -87,6 +89,8 @@ static const struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x04CA, 0x3007) },
 	{ USB_DEVICE(0x04CA, 0x3008) },
 	{ USB_DEVICE(0x04CA, 0x300b) },
+	{ USB_DEVICE(0x04CA, 0x300d) },
+	{ USB_DEVICE(0x04CA, 0x300f) },
 	{ USB_DEVICE(0x04CA, 0x3010) },
 	{ USB_DEVICE(0x0930, 0x0219) },
 	{ USB_DEVICE(0x0930, 0x0220) },
@@ -103,6 +107,7 @@ static const struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x0cf3, 0xe003) },
 	{ USB_DEVICE(0x0CF3, 0xE004) },
 	{ USB_DEVICE(0x0CF3, 0xE005) },
+	{ USB_DEVICE(0x0CF3, 0xE006) },
 	{ USB_DEVICE(0x13d3, 0x3362) },
 	{ USB_DEVICE(0x13d3, 0x3375) },
 	{ USB_DEVICE(0x13d3, 0x3393) },
@@ -110,6 +115,7 @@ static const struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3408) },
 	{ USB_DEVICE(0x13d3, 0x3423) },
 	{ USB_DEVICE(0x13d3, 0x3432) },
+	{ USB_DEVICE(0x13d3, 0x3474) },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE02C) },
@@ -134,6 +140,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
@@ -142,6 +149,8 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
@@ -157,6 +166,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x0CF3, 0x817a), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
@@ -165,6 +175,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU22 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
index 4f7e8d400bc0..7aab65427d38 100644
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -202,9 +202,8 @@ static void bt3c_write_wakeup(struct bt3c_info *info)
 		/* Send frame */
 		len = bt3c_write(iobase, 256, skb->data, skb->len);
 
-		if (len != skb->len) {
+		if (len != skb->len)
 			BT_ERR("Very strange");
-		}
 
 		kfree_skb(skb);
 
@@ -227,7 +226,6 @@ static void bt3c_receive(struct bt3c_info *info)
 	iobase = info->p_dev->resource[0]->start;
 
 	avail = bt3c_read(iobase, 0x7006);
-	//printk("bt3c_cs: receiving %d bytes\n", avail);
 
 	bt3c_address(iobase, 0x7480);
 	while (size < avail) {
@@ -250,7 +248,6 @@ static void bt3c_receive(struct bt3c_info *info)
 
 			bt_cb(info->rx_skb)->pkt_type = inb(iobase + DATA_L);
 			inb(iobase + DATA_H);
-			//printk("bt3c: PACKET_TYPE=%02x\n", bt_cb(info->rx_skb)->pkt_type);
 
 			switch (bt_cb(info->rx_skb)->pkt_type) {
 
@@ -364,7 +361,6 @@ static irqreturn_t bt3c_interrupt(int irq, void *dev_inst)
 			if (stat & 0x0001)
 				bt3c_receive(info);
 			if (stat & 0x0002) {
-				//BT_ERR("Ack (stat=0x%04x)", stat);
 				clear_bit(XMIT_SENDING, &(info->tx_state));
 				bt3c_write_wakeup(info);
 			}
diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
new file mode 100644
index 000000000000..1e1a4323a71f
--- /dev/null
+++ b/drivers/bluetooth/btbcm.c
@@ -0,0 +1,491 @@
+/*
+ *
+ *  Bluetooth support for Broadcom devices
+ *
+ *  Copyright (C) 2015  Intel Corporation
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <asm/unaligned.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btbcm.h"
+
+#define VERSION "0.1"
+
+#define BDADDR_BCM20702A0 (&(bdaddr_t) {{0x00, 0xa0, 0x02, 0x70, 0x20, 0x00}})
+#define BDADDR_BCM4324B3 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb3, 0x24, 0x43}})
+
+int btbcm_check_bdaddr(struct hci_dev *hdev)
+{
+	struct hci_rp_read_bd_addr *bda;
+	struct sk_buff *skb;
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_READ_BD_ADDR, 0, NULL,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		int err = PTR_ERR(skb);
+		BT_ERR("%s: BCM: Reading device address failed (%d)",
+		       hdev->name, err);
+		return err;
+	}
+
+	if (skb->len != sizeof(*bda)) {
+		BT_ERR("%s: BCM: Device address length mismatch", hdev->name);
+		kfree_skb(skb);
+		return -EIO;
+	}
+
+	bda = (struct hci_rp_read_bd_addr *)skb->data;
+
+	/* Check if the address indicates a controller with either an
+	 * invalid or default address. In both cases the device needs
+	 * to be marked as not having a valid address.
+	 *
+	 * The address 00:20:70:02:A0:00 indicates a BCM20702A0 controller
+	 * with no configured address.
+	 *
+	 * The address 43:24:B3:00:00:00 indicates a BCM4324B3 controller
+	 * with waiting for configuration state.
+	 */
+	if (!bacmp(&bda->bdaddr, BDADDR_BCM20702A0) ||
+	    !bacmp(&bda->bdaddr, BDADDR_BCM4324B3)) {
+		BT_INFO("%s: BCM: Using default device address (%pMR)",
+			hdev->name, &bda->bdaddr);
+		set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
+	}
+
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btbcm_check_bdaddr);
+
+int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	struct sk_buff *skb;
+	int err;
+
+	skb = __hci_cmd_sync(hdev, 0xfc01, 6, bdaddr, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		BT_ERR("%s: BCM: Change address command failed (%d)",
+		       hdev->name, err);
+		return err;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btbcm_set_bdaddr);
+
+int btbcm_patchram(struct hci_dev *hdev, const struct firmware *fw)
+{
+	const struct hci_command_hdr *cmd;
+	const u8 *fw_ptr;
+	size_t fw_size;
+	struct sk_buff *skb;
+	u16 opcode;
+	int err = 0;
+
+	/* Start Download */
+	skb = __hci_cmd_sync(hdev, 0xfc2e, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		BT_ERR("%s: BCM: Download Minidrv command failed (%d)",
+		       hdev->name, err);
+		goto done;
+	}
+	kfree_skb(skb);
+
+	/* 50 msec delay after Download Minidrv completes */
+	msleep(50);
+
+	fw_ptr = fw->data;
+	fw_size = fw->size;
+
+	while (fw_size >= sizeof(*cmd)) {
+		const u8 *cmd_param;
+
+		cmd = (struct hci_command_hdr *)fw_ptr;
+		fw_ptr += sizeof(*cmd);
+		fw_size -= sizeof(*cmd);
+
+		if (fw_size < cmd->plen) {
+			BT_ERR("%s: BCM: Patch is corrupted", hdev->name);
+			err = -EINVAL;
+			goto done;
+		}
+
+		cmd_param = fw_ptr;
+		fw_ptr += cmd->plen;
+		fw_size -= cmd->plen;
+
+		opcode = le16_to_cpu(cmd->opcode);
+
+		skb = __hci_cmd_sync(hdev, opcode, cmd->plen, cmd_param,
+				     HCI_INIT_TIMEOUT);
+		if (IS_ERR(skb)) {
+			err = PTR_ERR(skb);
+			BT_ERR("%s: BCM: Patch command %04x failed (%d)",
+			       hdev->name, opcode, err);
+			goto done;
+		}
+		kfree_skb(skb);
+	}
+
+	/* 250 msec delay after Launch Ram completes */
+	msleep(250);
+
+done:
+	return err;
+}
+EXPORT_SYMBOL(btbcm_patchram);
+
+static int btbcm_reset(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		int err = PTR_ERR(skb);
+		BT_ERR("%s: BCM: Reset failed (%d)", hdev->name, err);
+		return err;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+
+static struct sk_buff *btbcm_read_local_version(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s: BCM: Reading local version info failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return skb;
+	}
+
+	if (skb->len != sizeof(struct hci_rp_read_local_version)) {
+		BT_ERR("%s: BCM: Local version length mismatch", hdev->name);
+		kfree_skb(skb);
+		return ERR_PTR(-EIO);
+	}
+
+	return skb;
+}
+
+static struct sk_buff *btbcm_read_verbose_config(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	skb = __hci_cmd_sync(hdev, 0xfc79, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s: BCM: Read verbose config info failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return skb;
+	}
+
+	if (skb->len != 7) {
+		BT_ERR("%s: BCM: Verbose config length mismatch", hdev->name);
+		kfree_skb(skb);
+		return ERR_PTR(-EIO);
+	}
+
+	return skb;
+}
+
+static struct sk_buff *btbcm_read_usb_product(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	skb = __hci_cmd_sync(hdev, 0xfc5a, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s: BCM: Read USB product info failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return skb;
+	}
+
+	if (skb->len != 5) {
+		BT_ERR("%s: BCM: USB product length mismatch", hdev->name);
+		kfree_skb(skb);
+		return ERR_PTR(-EIO);
+	}
+
+	return skb;
+}
+
+static const struct {
+	u16 subver;
+	const char *name;
+} bcm_uart_subver_table[] = {
+	{ 0x410e, "BCM43341B0"	},	/* 002.001.014 */
+	{ 0x4406, "BCM4324B3"	},	/* 002.004.006 */
+	{ 0x610c, "BCM4354"	},	/* 003.001.012 */
+	{ }
+};
+
+int btbcm_initialize(struct hci_dev *hdev, char *fw_name, size_t len)
+{
+	u16 subver, rev;
+	const char *hw_name = NULL;
+	struct sk_buff *skb;
+	struct hci_rp_read_local_version *ver;
+	int i, err;
+
+	/* Reset */
+	err = btbcm_reset(hdev);
+	if (err)
+		return err;
+
+	/* Read Local Version Info */
+	skb = btbcm_read_local_version(hdev);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	ver = (struct hci_rp_read_local_version *)skb->data;
+	rev = le16_to_cpu(ver->hci_rev);
+	subver = le16_to_cpu(ver->lmp_subver);
+	kfree_skb(skb);
+
+	/* Read Verbose Config Version Info */
+	skb = btbcm_read_verbose_config(hdev);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	BT_INFO("%s: BCM: chip id %u", hdev->name, skb->data[1]);
+	kfree_skb(skb);
+
+	switch ((rev & 0xf000) >> 12) {
+	case 0:
+	case 1:
+	case 3:
+		for (i = 0; bcm_uart_subver_table[i].name; i++) {
+			if (subver == bcm_uart_subver_table[i].subver) {
+				hw_name = bcm_uart_subver_table[i].name;
+				break;
+			}
+		}
+
+		snprintf(fw_name, len, "brcm/%s.hcd", hw_name ? : "BCM");
+		break;
+	default:
+		return 0;
+	}
+
+	BT_INFO("%s: %s (%3.3u.%3.3u.%3.3u) build %4.4u", hdev->name,
+		hw_name ? : "BCM", (subver & 0x7000) >> 13,
+		(subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btbcm_initialize);
+
+int btbcm_finalize(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	struct hci_rp_read_local_version *ver;
+	u16 subver, rev;
+	int err;
+
+	/* Reset */
+	err = btbcm_reset(hdev);
+	if (err)
+		return err;
+
+	/* Read Local Version Info */
+	skb = btbcm_read_local_version(hdev);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	ver = (struct hci_rp_read_local_version *)skb->data;
+	rev = le16_to_cpu(ver->hci_rev);
+	subver = le16_to_cpu(ver->lmp_subver);
+	kfree_skb(skb);
+
+	BT_INFO("%s: BCM (%3.3u.%3.3u.%3.3u) build %4.4u", hdev->name,
+		(subver & 0x7000) >> 13, (subver & 0x1f00) >> 8,
+		(subver & 0x00ff), rev & 0x0fff);
+
+	btbcm_check_bdaddr(hdev);
+
+	set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btbcm_finalize);
+
+static const struct {
+	u16 subver;
+	const char *name;
+} bcm_usb_subver_table[] = {
+	{ 0x210b, "BCM43142A0"	},	/* 001.001.011 */
+	{ 0x2112, "BCM4314A0"	},	/* 001.001.018 */
+	{ 0x2118, "BCM20702A0"	},	/* 001.001.024 */
+	{ 0x2126, "BCM4335A0"	},	/* 001.001.038 */
+	{ 0x220e, "BCM20702A1"	},	/* 001.002.014 */
+	{ 0x230f, "BCM4354A2"	},	/* 001.003.015 */
+	{ 0x4106, "BCM4335B0"	},	/* 002.001.006 */
+	{ 0x410e, "BCM20702B0"	},	/* 002.001.014 */
+	{ 0x6109, "BCM4335C0"	},	/* 003.001.009 */
+	{ 0x610c, "BCM4354"	},	/* 003.001.012 */
+	{ }
+};
+
+int btbcm_setup_patchram(struct hci_dev *hdev)
+{
+	char fw_name[64];
+	const struct firmware *fw;
+	u16 subver, rev, pid, vid;
+	const char *hw_name = NULL;
+	struct sk_buff *skb;
+	struct hci_rp_read_local_version *ver;
+	int i, err;
+
+	/* Reset */
+	err = btbcm_reset(hdev);
+	if (err)
+		return err;
+
+	/* Read Local Version Info */
+	skb = btbcm_read_local_version(hdev);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	ver = (struct hci_rp_read_local_version *)skb->data;
+	rev = le16_to_cpu(ver->hci_rev);
+	subver = le16_to_cpu(ver->lmp_subver);
+	kfree_skb(skb);
+
+	/* Read Verbose Config Version Info */
+	skb = btbcm_read_verbose_config(hdev);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	BT_INFO("%s: BCM: chip id %u", hdev->name, skb->data[1]);
+	kfree_skb(skb);
+
+	switch ((rev & 0xf000) >> 12) {
+	case 0:
+	case 3:
+		for (i = 0; bcm_uart_subver_table[i].name; i++) {
+			if (subver == bcm_uart_subver_table[i].subver) {
+				hw_name = bcm_uart_subver_table[i].name;
+				break;
+			}
+		}
+
+		snprintf(fw_name, sizeof(fw_name), "brcm/%s.hcd",
+			 hw_name ? : "BCM");
+		break;
+	case 1:
+	case 2:
+		/* Read USB Product Info */
+		skb = btbcm_read_usb_product(hdev);
+		if (IS_ERR(skb))
+			return PTR_ERR(skb);
+
+		vid = get_unaligned_le16(skb->data + 1);
+		pid = get_unaligned_le16(skb->data + 3);
+		kfree_skb(skb);
+
+		for (i = 0; bcm_usb_subver_table[i].name; i++) {
+			if (subver == bcm_usb_subver_table[i].subver) {
+				hw_name = bcm_usb_subver_table[i].name;
+				break;
+			}
+		}
+
+		snprintf(fw_name, sizeof(fw_name), "brcm/%s-%4.4x-%4.4x.hcd",
+			 hw_name ? : "BCM", vid, pid);
+		break;
+	default:
+		return 0;
+	}
+
+	BT_INFO("%s: %s (%3.3u.%3.3u.%3.3u) build %4.4u", hdev->name,
+		hw_name ? : "BCM", (subver & 0x7000) >> 13,
+		(subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff);
+
+	err = request_firmware(&fw, fw_name, &hdev->dev);
+	if (err < 0) {
+		BT_INFO("%s: BCM: Patch %s not found", hdev->name, fw_name);
+		return 0;
+	}
+
+	btbcm_patchram(hdev, fw);
+
+	release_firmware(fw);
+
+	/* Reset */
+	err = btbcm_reset(hdev);
+	if (err)
+		return err;
+
+	/* Read Local Version Info */
+	skb = btbcm_read_local_version(hdev);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	ver = (struct hci_rp_read_local_version *)skb->data;
+	rev = le16_to_cpu(ver->hci_rev);
+	subver = le16_to_cpu(ver->lmp_subver);
+	kfree_skb(skb);
+
+	BT_INFO("%s: %s (%3.3u.%3.3u.%3.3u) build %4.4u", hdev->name,
+		hw_name ? : "BCM", (subver & 0x7000) >> 13,
+		(subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff);
+
+	btbcm_check_bdaddr(hdev);
+
+	set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btbcm_setup_patchram);
+
+int btbcm_setup_apple(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	/* Read Verbose Config Version Info */
+	skb = btbcm_read_verbose_config(hdev);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	BT_INFO("%s: BCM: chip id %u build %4.4u", hdev->name, skb->data[1],
+		get_unaligned_le16(skb->data + 5));
+	kfree_skb(skb);
+
+	set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btbcm_setup_apple);
+
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
+MODULE_DESCRIPTION("Bluetooth support for Broadcom devices ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/bluetooth/btbcm.h b/drivers/bluetooth/btbcm.h
new file mode 100644
index 000000000000..d9e6b41658e5
--- /dev/null
+++ b/drivers/bluetooth/btbcm.h
@@ -0,0 +1,117 @@
+/*
+ *
+ *  Bluetooth support for Broadcom devices
+ *
+ *  Copyright (C) 2015  Intel Corporation
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#define BCM_UART_CLOCK_48MHZ	0x01
+#define BCM_UART_CLOCK_24MHZ	0x02
+
+struct bcm_update_uart_baud_rate {
+	__le16 zero;
+	__le32 baud_rate;
+} __packed;
+
+struct bcm_write_uart_clock_setting {
+	__u8 type;
+} __packed;
+
+struct bcm_set_sleep_mode {
+	__u8 sleep_mode;
+	__u8 idle_host;
+	__u8 idle_dev;
+	__u8 bt_wake_active;
+	__u8 host_wake_active;
+	__u8 allow_host_sleep;
+	__u8 combine_modes;
+	__u8 tristate_control;
+	__u8 usb_auto_sleep;
+	__u8 usb_resume_timeout;
+	__u8 pulsed_host_wake;
+	__u8 break_to_host;
+} __packed;
+
+struct bcm_set_pcm_int_params {
+	__u8 routing;
+	__u8 rate;
+	__u8 frame_sync;
+	__u8 sync_mode;
+	__u8 clock_mode;
+} __packed;
+
+struct bcm_set_pcm_format_params {
+	__u8 lsb_first;
+	__u8 fill_value;
+	__u8 fill_method;
+	__u8 fill_num;
+	__u8 right_justify;
+} __packed;
+
+#if IS_ENABLED(CONFIG_BT_BCM)
+
+int btbcm_check_bdaddr(struct hci_dev *hdev);
+int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
+int btbcm_patchram(struct hci_dev *hdev, const struct firmware *fw);
+
+int btbcm_setup_patchram(struct hci_dev *hdev);
+int btbcm_setup_apple(struct hci_dev *hdev);
+
+int btbcm_initialize(struct hci_dev *hdev, char *fw_name, size_t len);
+int btbcm_finalize(struct hci_dev *hdev);
+
+#else
+
+static inline int btbcm_check_bdaddr(struct hci_dev *hdev)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int btbcm_patchram(struct hci_dev *hdev, const struct firmware *fw)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int btbcm_setup_patchram(struct hci_dev *hdev)
+{
+	return 0;
+}
+
+static inline int btbcm_setup_apple(struct hci_dev *hdev)
+{
+	return 0;
+}
+
+static inline int btbcm_initialize(struct hci_dev *hdev, char *fw_name,
+				   size_t len)
+{
+	return 0;
+}
+
+static inline int btbcm_finalize(struct hci_dev *hdev)
+{
+	return 0;
+}
+
+#endif
diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
new file mode 100644
index 000000000000..828f2f8d1568
--- /dev/null
+++ b/drivers/bluetooth/btintel.c
@@ -0,0 +1,95 @@
+/*
+ *
+ *  Bluetooth support for Intel devices
+ *
+ *  Copyright (C) 2015  Intel Corporation
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/module.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btintel.h"
+
+#define VERSION "0.1"
+
+#define BDADDR_INTEL (&(bdaddr_t) {{0x00, 0x8b, 0x9e, 0x19, 0x03, 0x00}})
+
+int btintel_check_bdaddr(struct hci_dev *hdev)
+{
+	struct hci_rp_read_bd_addr *bda;
+	struct sk_buff *skb;
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_READ_BD_ADDR, 0, NULL,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		int err = PTR_ERR(skb);
+		BT_ERR("%s: Reading Intel device address failed (%d)",
+		       hdev->name, err);
+		return err;
+	}
+
+	if (skb->len != sizeof(*bda)) {
+		BT_ERR("%s: Intel device address length mismatch", hdev->name);
+		kfree_skb(skb);
+		return -EIO;
+	}
+
+	bda = (struct hci_rp_read_bd_addr *)skb->data;
+
+	/* For some Intel based controllers, the default Bluetooth device
+	 * address 00:03:19:9E:8B:00 can be found. These controllers are
+	 * fully operational, but have the danger of duplicate addresses
+	 * and that in turn can cause problems with Bluetooth operation.
+	 */
+	if (!bacmp(&bda->bdaddr, BDADDR_INTEL)) {
+		BT_ERR("%s: Found Intel default device address (%pMR)",
+		       hdev->name, &bda->bdaddr);
+		set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
+	}
+
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_check_bdaddr);
+
+int btintel_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	struct sk_buff *skb;
+	int err;
+
+	skb = __hci_cmd_sync(hdev, 0xfc31, 6, bdaddr, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		BT_ERR("%s: Changing Intel device address failed (%d)",
+		       hdev->name, err);
+		return err;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_set_bdaddr);
+
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
+MODULE_DESCRIPTION("Bluetooth support for Intel devices ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
new file mode 100644
index 000000000000..4bda6ab34f60
--- /dev/null
+++ b/drivers/bluetooth/btintel.h
@@ -0,0 +1,89 @@
+/*
+ *
+ *  Bluetooth support for Intel devices
+ *
+ *  Copyright (C) 2015  Intel Corporation
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+struct intel_version {
+	u8 status;
+	u8 hw_platform;
+	u8 hw_variant;
+	u8 hw_revision;
+	u8 fw_variant;
+	u8 fw_revision;
+	u8 fw_build_num;
+	u8 fw_build_ww;
+	u8 fw_build_yy;
+	u8 fw_patch_num;
+} __packed;
+
+struct intel_boot_params {
+	__u8     status;
+	__u8     otp_format;
+	__u8     otp_content;
+	__u8     otp_patch;
+	__le16   dev_revid;
+	__u8     secure_boot;
+	__u8     key_from_hdr;
+	__u8     key_type;
+	__u8     otp_lock;
+	__u8     api_lock;
+	__u8     debug_lock;
+	bdaddr_t otp_bdaddr;
+	__u8     min_fw_build_nn;
+	__u8     min_fw_build_cw;
+	__u8     min_fw_build_yy;
+	__u8     limited_cce;
+	__u8     unlocked_state;
+} __packed;
+
+struct intel_bootup {
+	__u8     zero;
+	__u8     num_cmds;
+	__u8     source;
+	__u8     reset_type;
+	__u8     reset_reason;
+	__u8     ddc_status;
+} __packed;
+
+struct intel_secure_send_result {
+	__u8     result;
+	__le16   opcode;
+	__u8     status;
+} __packed;
+
+#if IS_ENABLED(CONFIG_BT_INTEL)
+
+int btintel_check_bdaddr(struct hci_dev *hdev);
+int btintel_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
+
+#else
+
+static inline int btintel_check_bdaddr(struct hci_dev *hdev)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int btintel_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	return -EOPNOTSUPP;
+}
+
+#endif
diff --git a/drivers/bluetooth/btmrvl_drv.h b/drivers/bluetooth/btmrvl_drv.h
index e75f8ee2512c..086f0ec89580 100644
--- a/drivers/bluetooth/btmrvl_drv.h
+++ b/drivers/bluetooth/btmrvl_drv.h
@@ -111,6 +111,7 @@ struct btmrvl_private {
 
 /* Vendor specific Bluetooth commands */
 #define BT_CMD_PSCAN_WIN_REPORT_ENABLE	0xFC03
+#define BT_CMD_ROUTE_SCO_TO_HOST	0xFC1D
 #define BT_CMD_SET_BDADDR		0xFC22
 #define BT_CMD_AUTO_SLEEP_MODE		0xFC23
 #define BT_CMD_HOST_SLEEP_CONFIG	0xFC59
diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c
index 413597789c61..de05deb444ce 100644
--- a/drivers/bluetooth/btmrvl_main.c
+++ b/drivers/bluetooth/btmrvl_main.c
@@ -230,6 +230,18 @@ int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, u8 subcmd)
 }
 EXPORT_SYMBOL_GPL(btmrvl_send_module_cfg_cmd);
 
+static int btmrvl_enable_sco_routing_to_host(struct btmrvl_private *priv)
+{
+	int ret;
+	u8 subcmd = 0;
+
+	ret = btmrvl_send_sync_cmd(priv, BT_CMD_ROUTE_SCO_TO_HOST, &subcmd, 1);
+	if (ret)
+		BT_ERR("BT_CMD_ROUTE_SCO_TO_HOST command failed: %#x", ret);
+
+	return ret;
+}
+
 int btmrvl_pscan_window_reporting(struct btmrvl_private *priv, u8 subcmd)
 {
 	struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
@@ -558,6 +570,8 @@ static int btmrvl_setup(struct hci_dev *hdev)
 
 	btmrvl_check_device_tree(priv);
 
+	btmrvl_enable_sco_routing_to_host(priv);
+
 	btmrvl_pscan_window_reporting(priv, 0x01);
 
 	priv->btmrvl_dev.psmode = 1;
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index 01d6da577eeb..b9a811900f6a 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -1217,7 +1217,7 @@ static void btmrvl_sdio_dump_firmware(struct btmrvl_private *priv)
 	unsigned int reg, reg_start, reg_end;
 	enum rdwr_status stat;
 	u8 *dbg_ptr, *end_ptr, *fw_dump_data, *fw_dump_ptr;
-	u8 dump_num, idx, i, read_reg, doneflag = 0;
+	u8 dump_num = 0, idx, i, read_reg, doneflag = 0;
 	u32 memory_size, fw_dump_len = 0;
 
 	/* dump sdio register first */
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
new file mode 100644
index 000000000000..84288938f7f2
--- /dev/null
+++ b/drivers/bluetooth/btrtl.c
@@ -0,0 +1,390 @@
+/*
+ *  Bluetooth support for Realtek devices
+ *
+ *  Copyright (C) 2015 Endless Mobile, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <asm/unaligned.h>
+#include <linux/usb.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btrtl.h"
+
+#define VERSION "0.1"
+
+#define RTL_EPATCH_SIGNATURE	"Realtech"
+#define RTL_ROM_LMP_3499	0x3499
+#define RTL_ROM_LMP_8723A	0x1200
+#define RTL_ROM_LMP_8723B	0x8723
+#define RTL_ROM_LMP_8821A	0x8821
+#define RTL_ROM_LMP_8761A	0x8761
+
+static int rtl_read_rom_version(struct hci_dev *hdev, u8 *version)
+{
+	struct rtl_rom_version_evt *rom_version;
+	struct sk_buff *skb;
+
+	/* Read RTL ROM version command */
+	skb = __hci_cmd_sync(hdev, 0xfc6d, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s: Read ROM version failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+
+	if (skb->len != sizeof(*rom_version)) {
+		BT_ERR("%s: RTL version event length mismatch", hdev->name);
+		kfree_skb(skb);
+		return -EIO;
+	}
+
+	rom_version = (struct rtl_rom_version_evt *)skb->data;
+	BT_INFO("%s: rom_version status=%x version=%x",
+		hdev->name, rom_version->status, rom_version->version);
+
+	*version = rom_version->version;
+
+	kfree_skb(skb);
+	return 0;
+}
+
+static int rtl8723b_parse_firmware(struct hci_dev *hdev, u16 lmp_subver,
+				   const struct firmware *fw,
+				   unsigned char **_buf)
+{
+	const u8 extension_sig[] = { 0x51, 0x04, 0xfd, 0x77 };
+	struct rtl_epatch_header *epatch_info;
+	unsigned char *buf;
+	int i, ret, len;
+	size_t min_size;
+	u8 opcode, length, data, rom_version = 0;
+	int project_id = -1;
+	const unsigned char *fwptr, *chip_id_base;
+	const unsigned char *patch_length_base, *patch_offset_base;
+	u32 patch_offset = 0;
+	u16 patch_length, num_patches;
+	const u16 project_id_to_lmp_subver[] = {
+		RTL_ROM_LMP_8723A,
+		RTL_ROM_LMP_8723B,
+		RTL_ROM_LMP_8821A,
+		RTL_ROM_LMP_8761A
+	};
+
+	ret = rtl_read_rom_version(hdev, &rom_version);
+	if (ret)
+		return ret;
+
+	min_size = sizeof(struct rtl_epatch_header) + sizeof(extension_sig) + 3;
+	if (fw->size < min_size)
+		return -EINVAL;
+
+	fwptr = fw->data + fw->size - sizeof(extension_sig);
+	if (memcmp(fwptr, extension_sig, sizeof(extension_sig)) != 0) {
+		BT_ERR("%s: extension section signature mismatch", hdev->name);
+		return -EINVAL;
+	}
+
+	/* Loop from the end of the firmware parsing instructions, until
+	 * we find an instruction that identifies the "project ID" for the
+	 * hardware supported by this firwmare file.
+	 * Once we have that, we double-check that that project_id is suitable
+	 * for the hardware we are working with.
+	 */
+	while (fwptr >= fw->data + (sizeof(struct rtl_epatch_header) + 3)) {
+		opcode = *--fwptr;
+		length = *--fwptr;
+		data = *--fwptr;
+
+		BT_DBG("check op=%x len=%x data=%x", opcode, length, data);
+
+		if (opcode == 0xff) /* EOF */
+			break;
+
+		if (length == 0) {
+			BT_ERR("%s: found instruction with length 0",
+			       hdev->name);
+			return -EINVAL;
+		}
+
+		if (opcode == 0 && length == 1) {
+			project_id = data;
+			break;
+		}
+
+		fwptr -= length;
+	}
+
+	if (project_id < 0) {
+		BT_ERR("%s: failed to find version instruction", hdev->name);
+		return -EINVAL;
+	}
+
+	if (project_id >= ARRAY_SIZE(project_id_to_lmp_subver)) {
+		BT_ERR("%s: unknown project id %d", hdev->name, project_id);
+		return -EINVAL;
+	}
+
+	if (lmp_subver != project_id_to_lmp_subver[project_id]) {
+		BT_ERR("%s: firmware is for %x but this is a %x", hdev->name,
+		       project_id_to_lmp_subver[project_id], lmp_subver);
+		return -EINVAL;
+	}
+
+	epatch_info = (struct rtl_epatch_header *)fw->data;
+	if (memcmp(epatch_info->signature, RTL_EPATCH_SIGNATURE, 8) != 0) {
+		BT_ERR("%s: bad EPATCH signature", hdev->name);
+		return -EINVAL;
+	}
+
+	num_patches = le16_to_cpu(epatch_info->num_patches);
+	BT_DBG("fw_version=%x, num_patches=%d",
+	       le32_to_cpu(epatch_info->fw_version), num_patches);
+
+	/* After the rtl_epatch_header there is a funky patch metadata section.
+	 * Assuming 2 patches, the layout is:
+	 * ChipID1 ChipID2 PatchLength1 PatchLength2 PatchOffset1 PatchOffset2
+	 *
+	 * Find the right patch for this chip.
+	 */
+	min_size += 8 * num_patches;
+	if (fw->size < min_size)
+		return -EINVAL;
+
+	chip_id_base = fw->data + sizeof(struct rtl_epatch_header);
+	patch_length_base = chip_id_base + (sizeof(u16) * num_patches);
+	patch_offset_base = patch_length_base + (sizeof(u16) * num_patches);
+	for (i = 0; i < num_patches; i++) {
+		u16 chip_id = get_unaligned_le16(chip_id_base +
+						 (i * sizeof(u16)));
+		if (chip_id == rom_version + 1) {
+			patch_length = get_unaligned_le16(patch_length_base +
+							  (i * sizeof(u16)));
+			patch_offset = get_unaligned_le32(patch_offset_base +
+							  (i * sizeof(u32)));
+			break;
+		}
+	}
+
+	if (!patch_offset) {
+		BT_ERR("%s: didn't find patch for chip id %d",
+		       hdev->name, rom_version);
+		return -EINVAL;
+	}
+
+	BT_DBG("length=%x offset=%x index %d", patch_length, patch_offset, i);
+	min_size = patch_offset + patch_length;
+	if (fw->size < min_size)
+		return -EINVAL;
+
+	/* Copy the firmware into a new buffer and write the version at
+	 * the end.
+	 */
+	len = patch_length;
+	buf = kmemdup(fw->data + patch_offset, patch_length, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	memcpy(buf + patch_length - 4, &epatch_info->fw_version, 4);
+
+	*_buf = buf;
+	return len;
+}
+
+static int rtl_download_firmware(struct hci_dev *hdev,
+				 const unsigned char *data, int fw_len)
+{
+	struct rtl_download_cmd *dl_cmd;
+	int frag_num = fw_len / RTL_FRAG_LEN + 1;
+	int frag_len = RTL_FRAG_LEN;
+	int ret = 0;
+	int i;
+
+	dl_cmd = kmalloc(sizeof(struct rtl_download_cmd), GFP_KERNEL);
+	if (!dl_cmd)
+		return -ENOMEM;
+
+	for (i = 0; i < frag_num; i++) {
+		struct sk_buff *skb;
+
+		BT_DBG("download fw (%d/%d)", i, frag_num);
+
+		dl_cmd->index = i;
+		if (i == (frag_num - 1)) {
+			dl_cmd->index |= 0x80; /* data end */
+			frag_len = fw_len % RTL_FRAG_LEN;
+		}
+		memcpy(dl_cmd->data, data, frag_len);
+
+		/* Send download command */
+		skb = __hci_cmd_sync(hdev, 0xfc20, frag_len + 1, dl_cmd,
+				     HCI_INIT_TIMEOUT);
+		if (IS_ERR(skb)) {
+			BT_ERR("%s: download fw command failed (%ld)",
+			       hdev->name, PTR_ERR(skb));
+			ret = -PTR_ERR(skb);
+			goto out;
+		}
+
+		if (skb->len != sizeof(struct rtl_download_response)) {
+			BT_ERR("%s: download fw event length mismatch",
+			       hdev->name);
+			kfree_skb(skb);
+			ret = -EIO;
+			goto out;
+		}
+
+		kfree_skb(skb);
+		data += RTL_FRAG_LEN;
+	}
+
+out:
+	kfree(dl_cmd);
+	return ret;
+}
+
+static int btrtl_setup_rtl8723a(struct hci_dev *hdev)
+{
+	const struct firmware *fw;
+	int ret;
+
+	BT_INFO("%s: rtl: loading rtl_bt/rtl8723a_fw.bin", hdev->name);
+	ret = request_firmware(&fw, "rtl_bt/rtl8723a_fw.bin", &hdev->dev);
+	if (ret < 0) {
+		BT_ERR("%s: Failed to load rtl_bt/rtl8723a_fw.bin", hdev->name);
+		return ret;
+	}
+
+	if (fw->size < 8) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* Check that the firmware doesn't have the epatch signature
+	 * (which is only for RTL8723B and newer).
+	 */
+	if (!memcmp(fw->data, RTL_EPATCH_SIGNATURE, 8)) {
+		BT_ERR("%s: unexpected EPATCH signature!", hdev->name);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = rtl_download_firmware(hdev, fw->data, fw->size);
+
+out:
+	release_firmware(fw);
+	return ret;
+}
+
+static int btrtl_setup_rtl8723b(struct hci_dev *hdev, u16 lmp_subver,
+				const char *fw_name)
+{
+	unsigned char *fw_data = NULL;
+	const struct firmware *fw;
+	int ret;
+
+	BT_INFO("%s: rtl: loading %s", hdev->name, fw_name);
+	ret = request_firmware(&fw, fw_name, &hdev->dev);
+	if (ret < 0) {
+		BT_ERR("%s: Failed to load %s", hdev->name, fw_name);
+		return ret;
+	}
+
+	ret = rtl8723b_parse_firmware(hdev, lmp_subver, fw, &fw_data);
+	if (ret < 0)
+		goto out;
+
+	ret = rtl_download_firmware(hdev, fw_data, ret);
+	kfree(fw_data);
+	if (ret < 0)
+		goto out;
+
+out:
+	release_firmware(fw);
+	return ret;
+}
+
+static struct sk_buff *btrtl_read_local_version(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return skb;
+	}
+
+	if (skb->len != sizeof(struct hci_rp_read_local_version)) {
+		BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION event length mismatch",
+		       hdev->name);
+		kfree_skb(skb);
+		return ERR_PTR(-EIO);
+	}
+
+	return skb;
+}
+
+int btrtl_setup_realtek(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	struct hci_rp_read_local_version *resp;
+	u16 lmp_subver;
+
+	skb = btrtl_read_local_version(hdev);
+	if (IS_ERR(skb))
+		return -PTR_ERR(skb);
+
+	resp = (struct hci_rp_read_local_version *)skb->data;
+	BT_INFO("%s: rtl: examining hci_ver=%02x hci_rev=%04x lmp_ver=%02x "
+		"lmp_subver=%04x", hdev->name, resp->hci_ver, resp->hci_rev,
+		resp->lmp_ver, resp->lmp_subver);
+
+	lmp_subver = le16_to_cpu(resp->lmp_subver);
+	kfree_skb(skb);
+
+	/* Match a set of subver values that correspond to stock firmware,
+	 * which is not compatible with standard btusb.
+	 * If matched, upload an alternative firmware that does conform to
+	 * standard btusb. Once that firmware is uploaded, the subver changes
+	 * to a different value.
+	 */
+	switch (lmp_subver) {
+	case RTL_ROM_LMP_8723A:
+	case RTL_ROM_LMP_3499:
+		return btrtl_setup_rtl8723a(hdev);
+	case RTL_ROM_LMP_8723B:
+		return btrtl_setup_rtl8723b(hdev, lmp_subver,
+					    "rtl_bt/rtl8723b_fw.bin");
+	case RTL_ROM_LMP_8821A:
+		return btrtl_setup_rtl8723b(hdev, lmp_subver,
+					    "rtl_bt/rtl8821a_fw.bin");
+	case RTL_ROM_LMP_8761A:
+		return btrtl_setup_rtl8723b(hdev, lmp_subver,
+					    "rtl_bt/rtl8761a_fw.bin");
+	default:
+		BT_INFO("rtl: assuming no firmware upload needed.");
+		return 0;
+	}
+}
+EXPORT_SYMBOL_GPL(btrtl_setup_realtek);
+
+MODULE_AUTHOR("Daniel Drake <drake@endlessm.com>");
+MODULE_DESCRIPTION("Bluetooth support for Realtek devices ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/bluetooth/btrtl.h b/drivers/bluetooth/btrtl.h
new file mode 100644
index 000000000000..38ffe4890cd1
--- /dev/null
+++ b/drivers/bluetooth/btrtl.h
@@ -0,0 +1,52 @@
+/*
+ *  Bluetooth support for Realtek devices
+ *
+ *  Copyright (C) 2015 Endless Mobile, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ */
+
+#define RTL_FRAG_LEN 252
+
+struct rtl_download_cmd {
+	__u8 index;
+	__u8 data[RTL_FRAG_LEN];
+} __packed;
+
+struct rtl_download_response {
+	__u8 status;
+	__u8 index;
+} __packed;
+
+struct rtl_rom_version_evt {
+	__u8 status;
+	__u8 version;
+} __packed;
+
+struct rtl_epatch_header {
+	__u8 signature[8];
+	__le32 fw_version;
+	__le16 num_patches;
+} __packed;
+
+#if IS_ENABLED(CONFIG_BT_RTL)
+
+int btrtl_setup_realtek(struct hci_dev *hdev);
+
+#else
+
+static inline int btrtl_setup_realtek(struct hci_dev *hdev)
+{
+	return -EOPNOTSUPP;
+}
+
+#endif
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 8bfc4c2bba87..b4cf8d9c9dac 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -24,16 +24,21 @@
 #include <linux/module.h>
 #include <linux/usb.h>
 #include <linux/firmware.h>
+#include <asm/unaligned.h>
 
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
 
-#define VERSION "0.7"
+#include "btintel.h"
+#include "btbcm.h"
+#include "btrtl.h"
+
+#define VERSION "0.8"
 
 static bool disable_scofix;
 static bool force_scofix;
 
-static bool reset = 1;
+static bool reset = true;
 
 static struct usb_driver btusb_driver;
 
@@ -52,6 +57,9 @@ static struct usb_driver btusb_driver;
 #define BTUSB_SWAVE		0x1000
 #define BTUSB_INTEL_NEW		0x2000
 #define BTUSB_AMP		0x4000
+#define BTUSB_QCA_ROME		0x8000
+#define BTUSB_BCM_APPLE		0x10000
+#define BTUSB_REALTEK		0x20000
 
 static const struct usb_device_id btusb_table[] = {
 	/* Generic Bluetooth USB device */
@@ -61,7 +69,8 @@ static const struct usb_device_id btusb_table[] = {
 	{ USB_DEVICE_INFO(0xe0, 0x01, 0x04), .driver_info = BTUSB_AMP },
 
 	/* Apple-specific (Broadcom) devices */
-	{ USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01),
+	  .driver_info = BTUSB_BCM_APPLE },
 
 	/* MediaTek MT76x0E */
 	{ USB_DEVICE(0x0e8d, 0x763f) },
@@ -107,13 +116,7 @@ static const struct usb_device_id btusb_table[] = {
 	{ USB_DEVICE(0x0c10, 0x0000) },
 
 	/* Broadcom BCM20702A0 */
-	{ USB_DEVICE(0x0489, 0xe042) },
-	{ USB_DEVICE(0x04ca, 0x2003) },
-	{ USB_DEVICE(0x0b05, 0x17b5) },
-	{ USB_DEVICE(0x0b05, 0x17cb) },
 	{ USB_DEVICE(0x413c, 0x8197) },
-	{ USB_DEVICE(0x13d3, 0x3404),
-	  .driver_info = BTUSB_BCM_PATCHRAM },
 
 	/* Broadcom BCM20702B0 (Dynex/Insignia) */
 	{ USB_DEVICE(0x19ff, 0x0239), .driver_info = BTUSB_BCM_PATCHRAM },
@@ -135,10 +138,12 @@ static const struct usb_device_id btusb_table[] = {
 	  .driver_info = BTUSB_BCM_PATCHRAM },
 
 	/* Belkin F8065bf - Broadcom based */
-	{ USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01),
+	  .driver_info = BTUSB_BCM_PATCHRAM },
 
 	/* IMC Networks - Broadcom based */
-	{ USB_VENDOR_AND_INTERFACE_INFO(0x13d3, 0xff, 0x01, 0x01) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x13d3, 0xff, 0x01, 0x01),
+	  .driver_info = BTUSB_BCM_PATCHRAM },
 
 	/* Intel Bluetooth USB Bootloader (RAM module) */
 	{ USB_DEVICE(0x8087, 0x0a5a),
@@ -159,6 +164,7 @@ static const struct usb_device_id blacklist_table[] = {
 	/* Atheros 3011 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
+	{ USB_DEVICE(0x04f2, 0xaff1), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
@@ -173,6 +179,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
@@ -181,6 +188,8 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
@@ -197,6 +206,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
@@ -204,6 +214,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
@@ -212,6 +223,11 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x0489, 0xe036), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },
 
+	/* QCA ROME chipset */
+	{ USB_DEVICE(0x0cf3, 0xe007), .driver_info = BTUSB_QCA_ROME },
+	{ USB_DEVICE(0x0cf3, 0xe300), .driver_info = BTUSB_QCA_ROME },
+	{ USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME },
+
 	/* Broadcom BCM2035 */
 	{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },
 	{ USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU },
@@ -253,7 +269,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x0e5e, 0x6622), .driver_info = BTUSB_BROKEN_ISOC },
 
 	/* Roper Class 1 Bluetooth Dongle (Silicon Wave based) */
-	{ USB_DEVICE(0x1300, 0x0001), .driver_info = BTUSB_SWAVE },
+	{ USB_DEVICE(0x1310, 0x0001), .driver_info = BTUSB_SWAVE },
 
 	/* Digianswer devices */
 	{ USB_DEVICE(0x08fd, 0x0001), .driver_info = BTUSB_DIGIANSWER },
@@ -281,6 +297,28 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01),
 	  .driver_info = BTUSB_IGNORE },
 
+	/* Realtek Bluetooth devices */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
+	  .driver_info = BTUSB_REALTEK },
+
+	/* Additional Realtek 8723AE Bluetooth devices */
+	{ USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x13d3, 0x3394), .driver_info = BTUSB_REALTEK },
+
+	/* Additional Realtek 8723BE Bluetooth devices */
+	{ USB_DEVICE(0x0489, 0xe085), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x0489, 0xe08b), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x13d3, 0x3410), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x13d3, 0x3416), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x13d3, 0x3459), .driver_info = BTUSB_REALTEK },
+
+	/* Additional Realtek 8821AE Bluetooth devices */
+	{ USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x13d3, 0x3458), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x13d3, 0x3461), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x13d3, 0x3462), .driver_info = BTUSB_REALTEK },
+
 	{ }	/* Terminating entry */
 };
 
@@ -296,6 +334,7 @@ static const struct usb_device_id blacklist_table[] = {
 #define BTUSB_FIRMWARE_LOADED	7
 #define BTUSB_FIRMWARE_FAILED	8
 #define BTUSB_BOOTING		9
+#define BTUSB_RESET_RESUME	10
 
 struct btusb_data {
 	struct hci_dev       *hdev;
@@ -337,17 +376,9 @@ struct btusb_data {
 
 	int (*recv_event)(struct hci_dev *hdev, struct sk_buff *skb);
 	int (*recv_bulk)(struct btusb_data *data, void *buffer, int count);
-};
 
-static int btusb_wait_on_bit_timeout(void *word, int bit, unsigned long timeout,
-				     unsigned mode)
-{
-	might_sleep();
-	if (!test_bit(bit, word))
-		return 0;
-	return out_of_line_wait_on_bit_timeout(word, bit, bit_wait_timeout,
-					       mode, timeout);
-}
+	int (*setup_on_usb)(struct hci_dev *hdev);
+};
 
 static inline void btusb_free_frags(struct btusb_data *data)
 {
@@ -888,6 +919,15 @@ static int btusb_open(struct hci_dev *hdev)
 
 	BT_DBG("%s", hdev->name);
 
+	/* Patching USB firmware files prior to starting any URBs of HCI path
+	 * It is more safe to use USB bulk channel for downloading USB patch
+	 */
+	if (data->setup_on_usb) {
+		err = data->setup_on_usb(hdev);
+		if (err < 0)
+			return err;
+	}
+
 	err = usb_autopm_get_interface(data->intf);
 	if (err < 0)
 		return err;
@@ -1283,74 +1323,42 @@ static int btusb_setup_csr(struct hci_dev *hdev)
 {
 	struct hci_rp_read_local_version *rp;
 	struct sk_buff *skb;
-	int ret;
 
 	BT_DBG("%s", hdev->name);
 
 	skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
 			     HCI_INIT_TIMEOUT);
 	if (IS_ERR(skb)) {
-		BT_ERR("Reading local version failed (%ld)", -PTR_ERR(skb));
-		return -PTR_ERR(skb);
+		int err = PTR_ERR(skb);
+		BT_ERR("%s: CSR: Local version failed (%d)", hdev->name, err);
+		return err;
+	}
+
+	if (skb->len != sizeof(struct hci_rp_read_local_version)) {
+		BT_ERR("%s: CSR: Local version length mismatch", hdev->name);
+		kfree_skb(skb);
+		return -EIO;
 	}
 
 	rp = (struct hci_rp_read_local_version *)skb->data;
 
-	if (!rp->status) {
-		if (le16_to_cpu(rp->manufacturer) != 10) {
-			/* Clear the reset quirk since this is not an actual
-			 * early Bluetooth 1.1 device from CSR.
-			 */
-			clear_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
+	if (le16_to_cpu(rp->manufacturer) != 10) {
+		/* Clear the reset quirk since this is not an actual
+		 * early Bluetooth 1.1 device from CSR.
+		 */
+		clear_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
 
-			/* These fake CSR controllers have all a broken
-			 * stored link key handling and so just disable it.
-			 */
-			set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY,
-				&hdev->quirks);
-		}
+		/* These fake CSR controllers have all a broken
+		 * stored link key handling and so just disable it.
+		 */
+		set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
 	}
 
-	ret = -bt_to_errno(rp->status);
-
 	kfree_skb(skb);
 
-	return ret;
+	return 0;
 }
 
-struct intel_version {
-	u8 status;
-	u8 hw_platform;
-	u8 hw_variant;
-	u8 hw_revision;
-	u8 fw_variant;
-	u8 fw_revision;
-	u8 fw_build_num;
-	u8 fw_build_ww;
-	u8 fw_build_yy;
-	u8 fw_patch_num;
-} __packed;
-
-struct intel_boot_params {
-	__u8     status;
-	__u8     otp_format;
-	__u8     otp_content;
-	__u8     otp_patch;
-	__le16   dev_revid;
-	__u8     secure_boot;
-	__u8     key_from_hdr;
-	__u8     key_type;
-	__u8     otp_lock;
-	__u8     api_lock;
-	__u8     debug_lock;
-	bdaddr_t otp_bdaddr;
-	__u8     min_fw_build_nn;
-	__u8     min_fw_build_cw;
-	__u8     min_fw_build_yy;
-	__u8     limited_cce;
-	__u8     unlocked_state;
-} __packed;
-
 static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev,
 						       struct intel_version *ver)
 {
@@ -1507,51 +1515,6 @@ static int btusb_setup_intel_patching(struct hci_dev *hdev,
 	return 0;
 }
 
-#define BDADDR_INTEL (&(bdaddr_t) {{0x00, 0x8b, 0x9e, 0x19, 0x03, 0x00}})
-
-static int btusb_check_bdaddr_intel(struct hci_dev *hdev)
-{
-	struct sk_buff *skb;
-	struct hci_rp_read_bd_addr *rp;
-
-	skb = __hci_cmd_sync(hdev, HCI_OP_READ_BD_ADDR, 0, NULL,
-			     HCI_INIT_TIMEOUT);
-	if (IS_ERR(skb)) {
-		BT_ERR("%s reading Intel device address failed (%ld)",
-		       hdev->name, PTR_ERR(skb));
-		return PTR_ERR(skb);
-	}
-
-	if (skb->len != sizeof(*rp)) {
-		BT_ERR("%s Intel device address length mismatch", hdev->name);
-		kfree_skb(skb);
-		return -EIO;
-	}
-
-	rp = (struct hci_rp_read_bd_addr *)skb->data;
-	if (rp->status) {
-		BT_ERR("%s Intel device address result failed (%02x)",
-		       hdev->name, rp->status);
-		kfree_skb(skb);
-		return -bt_to_errno(rp->status);
-	}
-
-	/* For some Intel based controllers, the default Bluetooth device
-	 * address 00:03:19:9E:8B:00 can be found. These controllers are
-	 * fully operational, but have the danger of duplicate addresses
-	 * and that in turn can cause problems with Bluetooth operation.
-	 */
-	if (!bacmp(&rp->bdaddr, BDADDR_INTEL)) {
-		BT_ERR("%s found Intel default device address (%pMR)",
-		       hdev->name, &rp->bdaddr);
-		set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
-	}
-
-	kfree_skb(skb);
-
-	return 0;
-}
-
 static int btusb_setup_intel(struct hci_dev *hdev)
 {
 	struct sk_buff *skb;
@@ -1603,12 +1566,6 @@ static int btusb_setup_intel(struct hci_dev *hdev)
 	}
 
 	ver = (struct intel_version *)skb->data;
-	if (ver->status) {
-		BT_ERR("%s Intel fw version event failed (%02x)", hdev->name,
-		       ver->status);
-		kfree_skb(skb);
-		return -bt_to_errno(ver->status);
-	}
 
 	BT_INFO("%s: read Intel version: %02x%02x%02x%02x%02x%02x%02x%02x%02x",
 		hdev->name, ver->hw_platform, ver->hw_variant,
@@ -1624,7 +1581,7 @@ static int btusb_setup_intel(struct hci_dev *hdev)
 		BT_INFO("%s: Intel device is already patched. patch num: %02x",
 			hdev->name, ver->fw_patch_num);
 		kfree_skb(skb);
-		btusb_check_bdaddr_intel(hdev);
+		btintel_check_bdaddr(hdev);
 		return 0;
 	}
 
@@ -1637,11 +1594,13 @@ static int btusb_setup_intel(struct hci_dev *hdev)
 	fw = btusb_setup_intel_get_fw(hdev, ver);
 	if (!fw) {
 		kfree_skb(skb);
-		btusb_check_bdaddr_intel(hdev);
+		btintel_check_bdaddr(hdev);
 		return 0;
 	}
 	fw_ptr = fw->data;
 
+	kfree_skb(skb);
+
 	/* This Intel specific command enables the manufacturer mode of the
 	 * controller.
 	 *
@@ -1656,15 +1615,6 @@ static int btusb_setup_intel(struct hci_dev *hdev)
 		return PTR_ERR(skb);
 	}
 
-	if (skb->data[0]) {
-		u8 evt_status = skb->data[0];
-
-		BT_ERR("%s enable Intel manufacturer mode event failed (%02x)",
-		       hdev->name, evt_status);
-		kfree_skb(skb);
-		release_firmware(fw);
-		return -bt_to_errno(evt_status);
-	}
 	kfree_skb(skb);
 
 	disable_patch = 1;
@@ -1718,7 +1668,7 @@ static int btusb_setup_intel(struct hci_dev *hdev)
 	BT_INFO("%s: Intel Bluetooth firmware patch completed and activated",
 		hdev->name);
 
-	btusb_check_bdaddr_intel(hdev);
+	btintel_check_bdaddr(hdev);
 	return 0;
 
 exit_mfg_disable:
@@ -1734,7 +1684,7 @@ exit_mfg_disable:
 
 	BT_INFO("%s: Intel Bluetooth firmware patch completed", hdev->name);
 
-	btusb_check_bdaddr_intel(hdev);
+	btintel_check_bdaddr(hdev);
 	return 0;
 
 exit_mfg_deactivate:
@@ -1755,7 +1705,7 @@ exit_mfg_deactivate:
 	BT_INFO("%s: Intel Bluetooth firmware patch completed and deactivated",
 		hdev->name);
 
-	btusb_check_bdaddr_intel(hdev);
+	btintel_check_bdaddr(hdev);
 	return 0;
 }
 
@@ -1797,6 +1747,38 @@ static int btusb_recv_bulk_intel(struct btusb_data *data, void *buffer,
 	return btusb_recv_bulk(data, buffer, count);
 }
 
+static void btusb_intel_bootup(struct btusb_data *data, const void *ptr,
+			       unsigned int len)
+{
+	const struct intel_bootup *evt = ptr;
+
+	if (len != sizeof(*evt))
+		return;
+
+	if (test_and_clear_bit(BTUSB_BOOTING, &data->flags)) {
+		smp_mb__after_atomic();
+		wake_up_bit(&data->flags, BTUSB_BOOTING);
+	}
+}
+
+static void btusb_intel_secure_send_result(struct btusb_data *data,
+					   const void *ptr, unsigned int len)
+{
+	const struct intel_secure_send_result *evt = ptr;
+
+	if (len != sizeof(*evt))
+		return;
+
+	if (evt->result)
+		set_bit(BTUSB_FIRMWARE_FAILED, &data->flags);
+
+	if (test_and_clear_bit(BTUSB_DOWNLOADING, &data->flags) &&
+	    test_bit(BTUSB_FIRMWARE_LOADED, &data->flags)) {
+		smp_mb__after_atomic();
+		wake_up_bit(&data->flags, BTUSB_DOWNLOADING);
+	}
+}
+
 static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb)
 {
 	struct btusb_data *data = hci_get_drvdata(hdev);
@@ -1804,32 +1786,27 @@ static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb)
 	if (test_bit(BTUSB_BOOTLOADER, &data->flags)) {
 		struct hci_event_hdr *hdr = (void *)skb->data;
 
-		/* When the firmware loading completes the device sends
-		 * out a vendor specific event indicating the result of
-		 * the firmware loading.
-		 */
-		if (skb->len == 7 && hdr->evt == 0xff && hdr->plen == 0x05 &&
-		    skb->data[2] == 0x06) {
-			if (skb->data[3] != 0x00)
-				test_bit(BTUSB_FIRMWARE_FAILED, &data->flags);
-
-			if (test_and_clear_bit(BTUSB_DOWNLOADING,
-					       &data->flags) &&
-			    test_bit(BTUSB_FIRMWARE_LOADED, &data->flags)) {
-				smp_mb__after_atomic();
-				wake_up_bit(&data->flags, BTUSB_DOWNLOADING);
-			}
-		}
-
-		/* When switching to the operational firmware the device
-		 * sends a vendor specific event indicating that the bootup
-		 * completed.
-		 */
-		if (skb->len == 9 && hdr->evt == 0xff && hdr->plen == 0x07 &&
-		    skb->data[2] == 0x02) {
-			if (test_and_clear_bit(BTUSB_BOOTING, &data->flags)) {
-				smp_mb__after_atomic();
-				wake_up_bit(&data->flags, BTUSB_BOOTING);
+		if (skb->len > HCI_EVENT_HDR_SIZE && hdr->evt == 0xff &&
+		    hdr->plen > 0) {
+			const void *ptr = skb->data + HCI_EVENT_HDR_SIZE + 1;
+			unsigned int len = skb->len - HCI_EVENT_HDR_SIZE - 1;
+
+			switch (skb->data[2]) {
+			case 0x02:
+				/* When switching to the operational firmware
+				 * the device sends a vendor specific event
+				 * indicating that the bootup completed.
+				 */
+				btusb_intel_bootup(data, ptr, len);
+				break;
+			case 0x06:
+				/* When the firmware loading completes the
+				 * device sends out a vendor specific event
+				 * indicating the result of the firmware
+				 * loading.
+				 */
+				btusb_intel_secure_send_result(data, ptr, len);
+				break;
 			}
 		}
 	}
@@ -1956,6 +1933,7 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 	struct intel_boot_params *params;
 	const struct firmware *fw;
 	const u8 *fw_ptr;
+	u32 frag_len;
 	char fwname[64];
 	ktime_t calltime, delta, rettime;
 	unsigned long long duration;
@@ -1983,13 +1961,6 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 	}
 
 	ver = (struct intel_version *)skb->data;
-	if (ver->status) {
-		BT_ERR("%s: Intel version command failure (%02x)",
-		       hdev->name, ver->status);
-		err = -bt_to_errno(ver->status);
-		kfree_skb(skb);
-		return err;
-	}
 
 	/* The hardware platform number has a fixed value of 0x37 and
 	 * for now only accept this single value.
@@ -2031,7 +2002,7 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 	if (ver->fw_variant == 0x23) {
 		kfree_skb(skb);
 		clear_bit(BTUSB_BOOTLOADER, &data->flags);
-		btusb_check_bdaddr_intel(hdev);
+		btintel_check_bdaddr(hdev);
 		return 0;
 	}
 
@@ -2064,13 +2035,6 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 	}
 
 	params = (struct intel_boot_params *)skb->data;
-	if (params->status) {
-		BT_ERR("%s: Intel boot parameters command failure (%02x)",
-		       hdev->name, params->status);
-		err = -bt_to_errno(params->status);
-		kfree_skb(skb);
-		return err;
-	}
 
 	BT_INFO("%s: Device revision is %u", hdev->name,
 		le16_to_cpu(params->dev_revid));
@@ -2120,6 +2084,12 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 
 	BT_INFO("%s: Found device firmware: %s", hdev->name, fwname);
 
+	/* Save the DDC file name for later use to apply once the firmware
+	 * downloading is done.
+	 */
+	snprintf(fwname, sizeof(fwname), "intel/ibt-11-%u.ddc",
+		 le16_to_cpu(params->dev_revid));
+
 	kfree_skb(skb);
 
 	if (fw->size < 644) {
@@ -2162,24 +2132,33 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 	}
 
 	fw_ptr = fw->data + 644;
+	frag_len = 0;
 
 	while (fw_ptr - fw->data < fw->size) {
-		struct hci_command_hdr *cmd = (void *)fw_ptr;
-		u8 cmd_len;
+		struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len);
 
-		cmd_len = sizeof(*cmd) + cmd->plen;
+		frag_len += sizeof(*cmd) + cmd->plen;
 
-		/* Send each command from the firmware data buffer as
-		 * a single Data fragment.
+		/* The paramter length of the secure send command requires
+		 * a 4 byte alignment. It happens so that the firmware file
+		 * contains proper Intel_NOP commands to align the fragments
+		 * as needed.
+		 *
+		 * Send set of commands with 4 byte alignment from the
+		 * firmware data buffer as a single Data fragement.
 		 */
-		err = btusb_intel_secure_send(hdev, 0x01, cmd_len, fw_ptr);
-		if (err < 0) {
-			BT_ERR("%s: Failed to send firmware data (%d)",
-			       hdev->name, err);
-			goto done;
-		}
+		if (!(frag_len % 4)) {
+			err = btusb_intel_secure_send(hdev, 0x01, frag_len,
+						      fw_ptr);
+			if (err < 0) {
+				BT_ERR("%s: Failed to send firmware data (%d)",
+				       hdev->name, err);
+				goto done;
+			}
 
-		fw_ptr += cmd_len;
+			fw_ptr += frag_len;
+			frag_len = 0;
+		}
 	}
 
 	set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
@@ -2197,9 +2176,9 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 	 * and thus just timeout if that happens and fail the setup
 	 * of this device.
 	 */
-	err = btusb_wait_on_bit_timeout(&data->flags, BTUSB_DOWNLOADING,
-					msecs_to_jiffies(5000),
-					TASK_INTERRUPTIBLE);
+	err = wait_on_bit_timeout(&data->flags, BTUSB_DOWNLOADING,
+				  TASK_INTERRUPTIBLE,
+				  msecs_to_jiffies(5000));
 	if (err == 1) {
 		BT_ERR("%s: Firmware loading interrupted", hdev->name);
 		err = -EINTR;
@@ -2250,9 +2229,9 @@ done:
 	 */
 	BT_INFO("%s: Waiting for device to boot", hdev->name);
 
-	err = btusb_wait_on_bit_timeout(&data->flags, BTUSB_BOOTING,
-					msecs_to_jiffies(1000),
-					TASK_INTERRUPTIBLE);
+	err = wait_on_bit_timeout(&data->flags, BTUSB_BOOTING,
+				  TASK_INTERRUPTIBLE,
+				  msecs_to_jiffies(1000));
 
 	if (err == 1) {
 		BT_ERR("%s: Device boot interrupted", hdev->name);
@@ -2272,6 +2251,43 @@ done:
 
 	clear_bit(BTUSB_BOOTLOADER, &data->flags);
 
+	/* Once the device is running in operational mode, it needs to apply
+	 * the device configuration (DDC) parameters.
+	 *
+	 * The device can work without DDC parameters, so even if it fails
+	 * to load the file, no need to fail the setup.
+	 */
+	err = request_firmware_direct(&fw, fwname, &hdev->dev);
+	if (err < 0)
+		return 0;
+
+	BT_INFO("%s: Found Intel DDC parameters: %s", hdev->name, fwname);
+
+	fw_ptr = fw->data;
+
+	/* DDC file contains one or more DDC structure which has
+	 * Length (1 byte), DDC ID (2 bytes), and DDC value (Length - 2).
+	 */
+	while (fw->size > fw_ptr - fw->data) {
+		u8 cmd_plen = fw_ptr[0] + sizeof(u8);
+
+		skb = __hci_cmd_sync(hdev, 0xfc8b, cmd_plen, fw_ptr,
+				     HCI_INIT_TIMEOUT);
+		if (IS_ERR(skb)) {
+			BT_ERR("%s: Failed to send Intel_Write_DDC (%ld)",
+			       hdev->name, PTR_ERR(skb));
+			release_firmware(fw);
+			return PTR_ERR(skb);
+		}
+
+		fw_ptr += cmd_plen;
+		kfree_skb(skb);
+	}
+
+	release_firmware(fw);
+
+	BT_INFO("%s: Applying Intel DDC parameters completed", hdev->name);
+
 	return 0;
 }
 
@@ -2303,27 +2319,24 @@ static void btusb_hw_error_intel(struct hci_dev *hdev, u8 code)
 		return;
 	}
 
-	if (skb->data[0] != 0x00) {
-		BT_ERR("%s: Exception info command failure (%02x)",
-		       hdev->name, skb->data[0]);
-		kfree_skb(skb);
-		return;
-	}
-
 	BT_ERR("%s: Exception info %s", hdev->name, (char *)(skb->data + 1));
 
 	kfree_skb(skb);
 }
 
-static int btusb_set_bdaddr_intel(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+static int btusb_shutdown_intel(struct hci_dev *hdev)
 {
 	struct sk_buff *skb;
 	long ret;
 
-	skb = __hci_cmd_sync(hdev, 0xfc31, 6, bdaddr, HCI_INIT_TIMEOUT);
+	/* Some platforms have an issue with BT LED when the interface is
+	 * down or BT radio is turned off, which takes 5 seconds to BT LED
+	 * goes off. This command turns off the BT LED immediately.
+	 */
+	skb = __hci_cmd_sync(hdev, 0xfc3f, 0, NULL, HCI_INIT_TIMEOUT);
 	if (IS_ERR(skb)) {
 		ret = PTR_ERR(skb);
-		BT_ERR("%s: changing Intel device address failed (%ld)",
+		BT_ERR("%s: turning off Intel device LED failed (%ld)",
 		       hdev->name, ret);
 		return ret;
 	}
@@ -2355,232 +2368,280 @@ static int btusb_set_bdaddr_marvell(struct hci_dev *hdev,
 	return 0;
 }
 
-#define BDADDR_BCM20702A0 (&(bdaddr_t) {{0x00, 0xa0, 0x02, 0x70, 0x20, 0x00}})
-
-static int btusb_setup_bcm_patchram(struct hci_dev *hdev)
+static int btusb_set_bdaddr_ath3012(struct hci_dev *hdev,
+				    const bdaddr_t *bdaddr)
 {
-	struct btusb_data *data = hci_get_drvdata(hdev);
-	struct usb_device *udev = data->udev;
-	char fw_name[64];
-	const struct firmware *fw;
-	const u8 *fw_ptr;
-	size_t fw_size;
-	const struct hci_command_hdr *cmd;
-	const u8 *cmd_param;
-	u16 opcode;
 	struct sk_buff *skb;
-	struct hci_rp_read_local_version *ver;
-	struct hci_rp_read_bd_addr *bda;
+	u8 buf[10];
 	long ret;
 
-	snprintf(fw_name, sizeof(fw_name), "brcm/%s-%04x-%04x.hcd",
-		 udev->product ? udev->product : "BCM",
-		 le16_to_cpu(udev->descriptor.idVendor),
-		 le16_to_cpu(udev->descriptor.idProduct));
-
-	ret = request_firmware(&fw, fw_name, &hdev->dev);
-	if (ret < 0) {
-		BT_INFO("%s: BCM: patch %s not found", hdev->name, fw_name);
-		return 0;
-	}
+	buf[0] = 0x01;
+	buf[1] = 0x01;
+	buf[2] = 0x00;
+	buf[3] = sizeof(bdaddr_t);
+	memcpy(buf + 4, bdaddr, sizeof(bdaddr_t));
 
-	/* Reset */
-	skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
+	skb = __hci_cmd_sync(hdev, 0xfc0b, sizeof(buf), buf, HCI_INIT_TIMEOUT);
 	if (IS_ERR(skb)) {
 		ret = PTR_ERR(skb);
-		BT_ERR("%s: HCI_OP_RESET failed (%ld)", hdev->name, ret);
-		goto done;
+		BT_ERR("%s: Change address command failed (%ld)",
+		       hdev->name, ret);
+		return ret;
 	}
 	kfree_skb(skb);
 
-	/* Read Local Version Info */
-	skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
-			     HCI_INIT_TIMEOUT);
-	if (IS_ERR(skb)) {
-		ret = PTR_ERR(skb);
-		BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION failed (%ld)",
-		       hdev->name, ret);
-		goto done;
-	}
+	return 0;
+}
 
-	if (skb->len != sizeof(*ver)) {
-		BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION event length mismatch",
-		       hdev->name);
-		kfree_skb(skb);
-		ret = -EIO;
-		goto done;
-	}
+#define QCA_DFU_PACKET_LEN	4096
 
-	ver = (struct hci_rp_read_local_version *)skb->data;
-	BT_INFO("%s: BCM: patching hci_ver=%02x hci_rev=%04x lmp_ver=%02x "
-		"lmp_subver=%04x", hdev->name, ver->hci_ver, ver->hci_rev,
-		ver->lmp_ver, ver->lmp_subver);
-	kfree_skb(skb);
+#define QCA_GET_TARGET_VERSION	0x09
+#define QCA_CHECK_STATUS	0x05
+#define QCA_DFU_DOWNLOAD	0x01
 
-	/* Start Download */
-	skb = __hci_cmd_sync(hdev, 0xfc2e, 0, NULL, HCI_INIT_TIMEOUT);
-	if (IS_ERR(skb)) {
-		ret = PTR_ERR(skb);
-		BT_ERR("%s: BCM: Download Minidrv command failed (%ld)",
-		       hdev->name, ret);
-		goto reset_fw;
-	}
-	kfree_skb(skb);
+#define QCA_SYSCFG_UPDATED	0x40
+#define QCA_PATCH_UPDATED	0x80
+#define QCA_DFU_TIMEOUT		3000
 
-	/* 50 msec delay after Download Minidrv completes */
-	msleep(50);
+struct qca_version {
+	__le32	rom_version;
+	__le32	patch_version;
+	__le32	ram_version;
+	__le32	ref_clock;
+	__u8	reserved[4];
+} __packed;
 
-	fw_ptr = fw->data;
-	fw_size = fw->size;
-
-	while (fw_size >= sizeof(*cmd)) {
-		cmd = (struct hci_command_hdr *)fw_ptr;
-		fw_ptr += sizeof(*cmd);
-		fw_size -= sizeof(*cmd);
-
-		if (fw_size < cmd->plen) {
-			BT_ERR("%s: BCM: patch %s is corrupted",
-			       hdev->name, fw_name);
-			ret = -EINVAL;
-			goto reset_fw;
-		}
+struct qca_rampatch_version {
+	__le16	rom_version;
+	__le16	patch_version;
+} __packed;
 
-		cmd_param = fw_ptr;
-		fw_ptr += cmd->plen;
-		fw_size -= cmd->plen;
+struct qca_device_info {
+	u32	rom_version;
+	u8	rampatch_hdr;	/* length of header in rampatch */
+	u8	nvm_hdr;	/* length of header in NVM */
+	u8	ver_offset;	/* offset of version structure in rampatch */
+};
 
-		opcode = le16_to_cpu(cmd->opcode);
+static const struct qca_device_info qca_devices_table[] = {
+	{ 0x00000100, 20, 4, 10 }, /* Rome 1.0 */
+	{ 0x00000101, 20, 4, 10 }, /* Rome 1.1 */
+	{ 0x00000200, 28, 4, 18 }, /* Rome 2.0 */
+	{ 0x00000201, 28, 4, 18 }, /* Rome 2.1 */
+	{ 0x00000300, 28, 4, 18 }, /* Rome 3.0 */
+	{ 0x00000302, 28, 4, 18 }, /* Rome 3.2 */
+};
 
-		skb = __hci_cmd_sync(hdev, opcode, cmd->plen, cmd_param,
-				     HCI_INIT_TIMEOUT);
-		if (IS_ERR(skb)) {
-			ret = PTR_ERR(skb);
-			BT_ERR("%s: BCM: patch command %04x failed (%ld)",
-			       hdev->name, opcode, ret);
-			goto reset_fw;
-		}
-		kfree_skb(skb);
-	}
+static int btusb_qca_send_vendor_req(struct hci_dev *hdev, u8 request,
+				     void *data, u16 size)
+{
+	struct btusb_data *btdata = hci_get_drvdata(hdev);
+	struct usb_device *udev = btdata->udev;
+	int pipe, err;
+	u8 *buf;
 
-	/* 250 msec delay after Launch Ram completes */
-	msleep(250);
+	buf = kmalloc(size, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
 
-reset_fw:
-	/* Reset */
-	skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
-	if (IS_ERR(skb)) {
-		ret = PTR_ERR(skb);
-		BT_ERR("%s: HCI_OP_RESET failed (%ld)", hdev->name, ret);
+	/* Found some of USB hosts have IOT issues with ours so that we should
+	 * not wait until HCI layer is ready.
+	 */
+	pipe = usb_rcvctrlpipe(udev, 0);
+	err = usb_control_msg(udev, pipe, request, USB_TYPE_VENDOR | USB_DIR_IN,
+			      0, 0, buf, size, USB_CTRL_SET_TIMEOUT);
+	if (err < 0) {
+		BT_ERR("%s: Failed to access otp area (%d)", hdev->name, err);
 		goto done;
 	}
-	kfree_skb(skb);
 
-	/* Read Local Version Info */
-	skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
-			     HCI_INIT_TIMEOUT);
-	if (IS_ERR(skb)) {
-		ret = PTR_ERR(skb);
-		BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION failed (%ld)",
-		       hdev->name, ret);
-		goto done;
-	}
+	memcpy(data, buf, size);
 
-	if (skb->len != sizeof(*ver)) {
-		BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION event length mismatch",
-		       hdev->name);
-		kfree_skb(skb);
-		ret = -EIO;
-		goto done;
-	}
+done:
+	kfree(buf);
 
-	ver = (struct hci_rp_read_local_version *)skb->data;
-	BT_INFO("%s: BCM: firmware hci_ver=%02x hci_rev=%04x lmp_ver=%02x "
-		"lmp_subver=%04x", hdev->name, ver->hci_ver, ver->hci_rev,
-		ver->lmp_ver, ver->lmp_subver);
-	kfree_skb(skb);
+	return err;
+}
 
-	/* Read BD Address */
-	skb = __hci_cmd_sync(hdev, HCI_OP_READ_BD_ADDR, 0, NULL,
-			     HCI_INIT_TIMEOUT);
-	if (IS_ERR(skb)) {
-		ret = PTR_ERR(skb);
-		BT_ERR("%s: HCI_OP_READ_BD_ADDR failed (%ld)",
-		       hdev->name, ret);
+static int btusb_setup_qca_download_fw(struct hci_dev *hdev,
+				       const struct firmware *firmware,
+				       size_t hdr_size)
+{
+	struct btusb_data *btdata = hci_get_drvdata(hdev);
+	struct usb_device *udev = btdata->udev;
+	size_t count, size, sent = 0;
+	int pipe, len, err;
+	u8 *buf;
+
+	buf = kmalloc(QCA_DFU_PACKET_LEN, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	count = firmware->size;
+
+	size = min_t(size_t, count, hdr_size);
+	memcpy(buf, firmware->data, size);
+
+	/* USB patches should go down to controller through USB path
+	 * because binary format fits to go down through USB channel.
+	 * USB control path is for patching headers and USB bulk is for
+	 * patch body.
+	 */
+	pipe = usb_sndctrlpipe(udev, 0);
+	err = usb_control_msg(udev, pipe, QCA_DFU_DOWNLOAD, USB_TYPE_VENDOR,
+			      0, 0, buf, size, USB_CTRL_SET_TIMEOUT);
+	if (err < 0) {
+		BT_ERR("%s: Failed to send headers (%d)", hdev->name, err);
 		goto done;
 	}
 
-	if (skb->len != sizeof(*bda)) {
-		BT_ERR("%s: HCI_OP_READ_BD_ADDR event length mismatch",
-		       hdev->name);
-		kfree_skb(skb);
-		ret = -EIO;
-		goto done;
+	sent += size;
+	count -= size;
+
+	while (count) {
+		size = min_t(size_t, count, QCA_DFU_PACKET_LEN);
+
+		memcpy(buf, firmware->data + sent, size);
+
+		pipe = usb_sndbulkpipe(udev, 0x02);
+		err = usb_bulk_msg(udev, pipe, buf, size, &len,
+				   QCA_DFU_TIMEOUT);
+		if (err < 0) {
+			BT_ERR("%s: Failed to send body at %zd of %zd (%d)",
+			       hdev->name, sent, firmware->size, err);
+			break;
+		}
+
+		if (size != len) {
+			BT_ERR("%s: Failed to get bulk buffer", hdev->name);
+			err = -EILSEQ;
+			break;
+		}
+
+		sent  += size;
+		count -= size;
 	}
 
-	bda = (struct hci_rp_read_bd_addr *)skb->data;
-	if (bda->status) {
-		BT_ERR("%s: HCI_OP_READ_BD_ADDR error status (%02x)",
-		       hdev->name, bda->status);
-		kfree_skb(skb);
-		ret = -bt_to_errno(bda->status);
-		goto done;
+done:
+	kfree(buf);
+	return err;
+}
+
+static int btusb_setup_qca_load_rampatch(struct hci_dev *hdev,
+					 struct qca_version *ver,
+					 const struct qca_device_info *info)
+{
+	struct qca_rampatch_version *rver;
+	const struct firmware *fw;
+	u32 ver_rom, ver_patch;
+	u16 rver_rom, rver_patch;
+	char fwname[64];
+	int err;
+
+	ver_rom = le32_to_cpu(ver->rom_version);
+	ver_patch = le32_to_cpu(ver->patch_version);
+
+	snprintf(fwname, sizeof(fwname), "qca/rampatch_usb_%08x.bin", ver_rom);
+
+	err = request_firmware(&fw, fwname, &hdev->dev);
+	if (err) {
+		BT_ERR("%s: failed to request rampatch file: %s (%d)",
+		       hdev->name, fwname, err);
+		return err;
 	}
 
-	/* The address 00:20:70:02:A0:00 indicates a BCM20702A0 controller
-	 * with no configured address.
-	 */
-	if (!bacmp(&bda->bdaddr, BDADDR_BCM20702A0)) {
-		BT_INFO("%s: BCM: using default device address (%pMR)",
-			hdev->name, &bda->bdaddr);
-		set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
+	BT_INFO("%s: using rampatch file: %s", hdev->name, fwname);
+
+	rver = (struct qca_rampatch_version *)(fw->data + info->ver_offset);
+	rver_rom = le16_to_cpu(rver->rom_version);
+	rver_patch = le16_to_cpu(rver->patch_version);
+
+	BT_INFO("%s: QCA: patch rome 0x%x build 0x%x, firmware rome 0x%x "
+		"build 0x%x", hdev->name, rver_rom, rver_patch, ver_rom,
+		ver_patch);
+
+	if (rver_rom != ver_rom || rver_patch <= ver_patch) {
+		BT_ERR("%s: rampatch file version did not match with firmware",
+		       hdev->name);
+		err = -EINVAL;
+		goto done;
 	}
 
-	kfree_skb(skb);
+	err = btusb_setup_qca_download_fw(hdev, fw, info->rampatch_hdr);
 
 done:
 	release_firmware(fw);
 
-	return ret;
+	return err;
 }
 
-static int btusb_set_bdaddr_bcm(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
+				    struct qca_version *ver,
+				    const struct qca_device_info *info)
 {
-	struct sk_buff *skb;
-	long ret;
+	const struct firmware *fw;
+	char fwname[64];
+	int err;
 
-	skb = __hci_cmd_sync(hdev, 0xfc01, 6, bdaddr, HCI_INIT_TIMEOUT);
-	if (IS_ERR(skb)) {
-		ret = PTR_ERR(skb);
-		BT_ERR("%s: BCM: Change address command failed (%ld)",
-		       hdev->name, ret);
-		return ret;
+	snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
+		 le32_to_cpu(ver->rom_version));
+
+	err = request_firmware(&fw, fwname, &hdev->dev);
+	if (err) {
+		BT_ERR("%s: failed to request NVM file: %s (%d)",
+		       hdev->name, fwname, err);
+		return err;
 	}
-	kfree_skb(skb);
 
-	return 0;
+	BT_INFO("%s: using NVM file: %s", hdev->name, fwname);
+
+	err = btusb_setup_qca_download_fw(hdev, fw, info->nvm_hdr);
+
+	release_firmware(fw);
+
+	return err;
 }
 
-static int btusb_set_bdaddr_ath3012(struct hci_dev *hdev,
-				    const bdaddr_t *bdaddr)
+static int btusb_setup_qca(struct hci_dev *hdev)
 {
-	struct sk_buff *skb;
-	u8 buf[10];
-	long ret;
+	const struct qca_device_info *info = NULL;
+	struct qca_version ver;
+	u32 ver_rom;
+	u8 status;
+	int i, err;
 
-	buf[0] = 0x01;
-	buf[1] = 0x01;
-	buf[2] = 0x00;
-	buf[3] = sizeof(bdaddr_t);
-	memcpy(buf + 4, bdaddr, sizeof(bdaddr_t));
+	err = btusb_qca_send_vendor_req(hdev, QCA_GET_TARGET_VERSION, &ver,
+					sizeof(ver));
+	if (err < 0)
+		return err;
 
-	skb = __hci_cmd_sync(hdev, 0xfc0b, sizeof(buf), buf, HCI_INIT_TIMEOUT);
-	if (IS_ERR(skb)) {
-		ret = PTR_ERR(skb);
-		BT_ERR("%s: Change address command failed (%ld)",
-		       hdev->name, ret);
-		return ret;
+	ver_rom = le32_to_cpu(ver.rom_version);
+	for (i = 0; i < ARRAY_SIZE(qca_devices_table); i++) {
+		if (ver_rom == qca_devices_table[i].rom_version)
+			info = &qca_devices_table[i];
+	}
+	if (!info) {
+		BT_ERR("%s: don't support firmware rome 0x%x", hdev->name,
+		       ver_rom);
+		return -ENODEV;
+	}
+
+	err = btusb_qca_send_vendor_req(hdev, QCA_CHECK_STATUS, &status,
+					sizeof(status));
+	if (err < 0)
+		return err;
+
+	if (!(status & QCA_PATCH_UPDATED)) {
+		err = btusb_setup_qca_load_rampatch(hdev, &ver, info);
+		if (err < 0)
+			return err;
+	}
+
+	if (!(status & QCA_SYSCFG_UPDATED)) {
+		err = btusb_setup_qca_load_nvm(hdev, &ver, info);
+		if (err < 0)
+			return err;
 	}
-	kfree_skb(skb);
 
 	return 0;
 }
@@ -2701,23 +2762,29 @@ static int btusb_probe(struct usb_interface *intf,
 	if (id->driver_info & BTUSB_BCM92035)
 		hdev->setup = btusb_setup_bcm92035;
 
+#ifdef CONFIG_BT_HCIBTUSB_BCM
 	if (id->driver_info & BTUSB_BCM_PATCHRAM) {
-		hdev->setup = btusb_setup_bcm_patchram;
-		hdev->set_bdaddr = btusb_set_bdaddr_bcm;
-		set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
+		hdev->setup = btbcm_setup_patchram;
+		hdev->set_bdaddr = btbcm_set_bdaddr;
 	}
 
+	if (id->driver_info & BTUSB_BCM_APPLE)
+		hdev->setup = btbcm_setup_apple;
+#endif
+
 	if (id->driver_info & BTUSB_INTEL) {
 		hdev->setup = btusb_setup_intel;
-		hdev->set_bdaddr = btusb_set_bdaddr_intel;
+		hdev->shutdown = btusb_shutdown_intel;
+		hdev->set_bdaddr = btintel_set_bdaddr;
 		set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
+		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
 	}
 
 	if (id->driver_info & BTUSB_INTEL_NEW) {
 		hdev->send = btusb_send_frame_intel;
 		hdev->setup = btusb_setup_intel_new;
 		hdev->hw_error = btusb_hw_error_intel;
-		hdev->set_bdaddr = btusb_set_bdaddr_intel;
+		hdev->set_bdaddr = btintel_set_bdaddr;
 		set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
 	}
 
@@ -2734,9 +2801,27 @@ static int btusb_probe(struct usb_interface *intf,
 
 	if (id->driver_info & BTUSB_ATH3012) {
 		hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
+		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
 		set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
 	}
 
+	if (id->driver_info & BTUSB_QCA_ROME) {
+		data->setup_on_usb = btusb_setup_qca;
+		hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
+	}
+
+#ifdef CONFIG_BT_HCIBTUSB_RTL
+	if (id->driver_info & BTUSB_REALTEK) {
+		hdev->setup = btrtl_setup_realtek;
+
+		/* Realtek devices lose their updated firmware over suspend,
+		 * but the USB hub doesn't notice any status change.
+		 * Explicitly request a device reset on resume.
+		 */
+		set_bit(BTUSB_RESET_RESUME, &data->flags);
+	}
+#endif
+
 	if (id->driver_info & BTUSB_AMP) {
 		/* AMP controllers do not support SCO packets */
 		data->isoc = NULL;
@@ -2772,6 +2857,8 @@ static int btusb_probe(struct usb_interface *intf,
 		/* Fake CSR devices with broken commands */
 		if (bcdDevice <= 0x100)
 			hdev->setup = btusb_setup_csr;
+
+		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
 	}
 
 	if (id->driver_info & BTUSB_SNIFFER) {
@@ -2865,6 +2952,14 @@ static int btusb_suspend(struct usb_interface *intf, pm_message_t message)
 	btusb_stop_traffic(data);
 	usb_kill_anchored_urbs(&data->tx_anchor);
 
+	/* Optionally request a device reset on resume, but only when
+	 * wakeups are disabled. If wakeups are enabled we assume the
+	 * device will stay powered up throughout suspend.
+	 */
+	if (test_bit(BTUSB_RESET_RESUME, &data->flags) &&
+	    !device_may_wakeup(&data->udev->dev))
+		data->udev->reset_resume = 1;
+
 	return 0;
 }
 
diff --git a/drivers/bluetooth/btwilink.c b/drivers/bluetooth/btwilink.c
index 55c135b7757a..7a722df97343 100644
--- a/drivers/bluetooth/btwilink.c
+++ b/drivers/bluetooth/btwilink.c
@@ -22,7 +22,7 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  *
  */
-#define DEBUG
+
 #include <linux/platform_device.h>
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
diff --git a/drivers/bluetooth/hci_ath.c b/drivers/bluetooth/hci_ath.c
index 9c4dcf4c62ea..6da5e4ca13ea 100644
--- a/drivers/bluetooth/hci_ath.c
+++ b/drivers/bluetooth/hci_ath.c
@@ -45,6 +45,7 @@ struct ath_struct {
 	struct hci_uart *hu;
 	unsigned int cur_sleep;
 
+	struct sk_buff *rx_skb;
 	struct sk_buff_head txq;
 	struct work_struct ctxtsw;
 };
@@ -94,7 +95,6 @@ static void ath_hci_uart_work(struct work_struct *work)
 	hci_uart_tx_wakeup(hu);
 }
 
-/* Initialize protocol */
 static int ath_open(struct hci_uart *hu)
 {
 	struct ath_struct *ath;
@@ -115,8 +115,7 @@ static int ath_open(struct hci_uart *hu)
 	return 0;
 }
 
-/* Flush protocol data */
-static int ath_flush(struct hci_uart *hu)
+static int ath_close(struct hci_uart *hu)
 {
 	struct ath_struct *ath = hu->priv;
 
@@ -124,11 +123,17 @@ static int ath_flush(struct hci_uart *hu)
 
 	skb_queue_purge(&ath->txq);
 
+	kfree_skb(ath->rx_skb);
+
+	cancel_work_sync(&ath->ctxtsw);
+
+	hu->priv = NULL;
+	kfree(ath);
+
 	return 0;
 }
 
-/* Close protocol */
-static int ath_close(struct hci_uart *hu)
+static int ath_flush(struct hci_uart *hu)
 {
 	struct ath_struct *ath = hu->priv;
 
@@ -136,17 +141,66 @@ static int ath_close(struct hci_uart *hu)
 
 	skb_queue_purge(&ath->txq);
 
-	cancel_work_sync(&ath->ctxtsw);
+	return 0;
+}
 
-	hu->priv = NULL;
-	kfree(ath);
+static int ath_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	struct sk_buff *skb;
+	u8 buf[10];
+	int err;
+
+	buf[0] = 0x01;
+	buf[1] = 0x01;
+	buf[2] = 0x00;
+	buf[3] = sizeof(bdaddr_t);
+	memcpy(buf + 4, bdaddr, sizeof(bdaddr_t));
+
+	skb = __hci_cmd_sync(hdev, 0xfc0b, sizeof(buf), buf, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		BT_ERR("%s: Change address command failed (%d)",
+		       hdev->name, err);
+		return err;
+	}
+	kfree_skb(skb);
 
 	return 0;
 }
 
+static int ath_setup(struct hci_uart *hu)
+{
+	BT_DBG("hu %p", hu);
+
+	hu->hdev->set_bdaddr = ath_set_bdaddr;
+
+	return 0;
+}
+
+static const struct h4_recv_pkt ath_recv_pkts[] = {
+	{ H4_RECV_ACL,   .recv = hci_recv_frame },
+	{ H4_RECV_SCO,   .recv = hci_recv_frame },
+	{ H4_RECV_EVENT, .recv = hci_recv_frame },
+};
+
+static int ath_recv(struct hci_uart *hu, const void *data, int count)
+{
+	struct ath_struct *ath = hu->priv;
+
+	ath->rx_skb = h4_recv_buf(hu->hdev, ath->rx_skb, data, count,
+				  ath_recv_pkts, ARRAY_SIZE(ath_recv_pkts));
+	if (IS_ERR(ath->rx_skb)) {
+		int err = PTR_ERR(ath->rx_skb);
+		BT_ERR("%s: Frame reassembly failed (%d)", hu->hdev->name, err);
+		ath->rx_skb = NULL;
+		return err;
+	}
+
+	return count;
+}
+
 #define HCI_OP_ATH_SLEEP 0xFC04
 
-/* Enqueue frame for transmittion */
 static int ath_enqueue(struct hci_uart *hu, struct sk_buff *skb)
 {
 	struct ath_struct *ath = hu->priv;
@@ -156,8 +210,7 @@ static int ath_enqueue(struct hci_uart *hu, struct sk_buff *skb)
 		return 0;
 	}
 
-	/*
-	 * Update power management enable flag with parameters of
+	/* Update power management enable flag with parameters of
 	 * HCI sleep enable vendor specific HCI command.
 	 */
 	if (bt_cb(skb)->pkt_type == HCI_COMMAND_PKT) {
@@ -187,40 +240,21 @@ static struct sk_buff *ath_dequeue(struct hci_uart *hu)
 	return skb_dequeue(&ath->txq);
 }
 
-/* Recv data */
-static int ath_recv(struct hci_uart *hu, void *data, int count)
-{
-	int ret;
-
-	ret = hci_recv_stream_fragment(hu->hdev, data, count);
-	if (ret < 0) {
-		BT_ERR("Frame Reassembly Failed");
-		return ret;
-	}
-
-	return count;
-}
-
-static struct hci_uart_proto athp = {
-	.id = HCI_UART_ATH3K,
-	.open = ath_open,
-	.close = ath_close,
-	.recv = ath_recv,
-	.enqueue = ath_enqueue,
-	.dequeue = ath_dequeue,
-	.flush = ath_flush,
+static const struct hci_uart_proto athp = {
+	.id		= HCI_UART_ATH3K,
+	.name		= "ATH3K",
+	.open		= ath_open,
+	.close		= ath_close,
+	.flush		= ath_flush,
+	.setup		= ath_setup,
+	.recv		= ath_recv,
+	.enqueue	= ath_enqueue,
+	.dequeue	= ath_dequeue,
 };
 
 int __init ath_init(void)
 {
-	int err = hci_uart_register_proto(&athp);
-
-	if (!err)
-		BT_INFO("HCIATH3K protocol initialized");
-	else
-		BT_ERR("HCIATH3K protocol registration failed");
-
-	return err;
+	return hci_uart_register_proto(&athp);
 }
 
 int __exit ath_deinit(void)
diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
new file mode 100644
index 000000000000..23523e140a9a
--- /dev/null
+++ b/drivers/bluetooth/hci_bcm.c
@@ -0,0 +1,258 @@
+/*
+ *
+ *  Bluetooth HCI UART driver for Broadcom devices
+ *
+ *  Copyright (C) 2015  Intel Corporation
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/skbuff.h>
+#include <linux/firmware.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btbcm.h"
+#include "hci_uart.h"
+
+struct bcm_data {
+	struct sk_buff *rx_skb;
+	struct sk_buff_head txq;
+};
+
+static int bcm_set_baudrate(struct hci_uart *hu, unsigned int speed)
+{
+	struct hci_dev *hdev = hu->hdev;
+	struct sk_buff *skb;
+	struct bcm_update_uart_baud_rate param;
+
+	if (speed > 3000000) {
+		struct bcm_write_uart_clock_setting clock;
+
+		clock.type = BCM_UART_CLOCK_48MHZ;
+
+		BT_DBG("%s: Set Controller clock (%d)", hdev->name, clock.type);
+
+		/* This Broadcom specific command changes the UART's controller
+		 * clock for baud rate > 3000000.
+		 */
+		skb = __hci_cmd_sync(hdev, 0xfc45, 1, &clock, HCI_INIT_TIMEOUT);
+		if (IS_ERR(skb)) {
+			int err = PTR_ERR(skb);
+			BT_ERR("%s: BCM: failed to write clock command (%d)",
+			       hdev->name, err);
+			return err;
+		}
+
+		kfree_skb(skb);
+	}
+
+	BT_DBG("%s: Set Controller UART speed to %d bit/s", hdev->name, speed);
+
+	param.zero = cpu_to_le16(0);
+	param.baud_rate = cpu_to_le32(speed);
+
+	/* This Broadcom specific command changes the UART's controller baud
+	 * rate.
+	 */
+	skb = __hci_cmd_sync(hdev, 0xfc18, sizeof(param), &param,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		int err = PTR_ERR(skb);
+		BT_ERR("%s: BCM: failed to write update baudrate command (%d)",
+		       hdev->name, err);
+		return err;
+	}
+
+	kfree_skb(skb);
+
+	return 0;
+}
+
+static int bcm_open(struct hci_uart *hu)
+{
+	struct bcm_data *bcm;
+
+	BT_DBG("hu %p", hu);
+
+	bcm = kzalloc(sizeof(*bcm), GFP_KERNEL);
+	if (!bcm)
+		return -ENOMEM;
+
+	skb_queue_head_init(&bcm->txq);
+
+	hu->priv = bcm;
+	return 0;
+}
+
+static int bcm_close(struct hci_uart *hu)
+{
+	struct bcm_data *bcm = hu->priv;
+
+	BT_DBG("hu %p", hu);
+
+	skb_queue_purge(&bcm->txq);
+	kfree_skb(bcm->rx_skb);
+	kfree(bcm);
+
+	hu->priv = NULL;
+	return 0;
+}
+
+static int bcm_flush(struct hci_uart *hu)
+{
+	struct bcm_data *bcm = hu->priv;
+
+	BT_DBG("hu %p", hu);
+
+	skb_queue_purge(&bcm->txq);
+
+	return 0;
+}
+
+static int bcm_setup(struct hci_uart *hu)
+{
+	char fw_name[64];
+	const struct firmware *fw;
+	unsigned int speed;
+	int err;
+
+	BT_DBG("hu %p", hu);
+
+	hu->hdev->set_bdaddr = btbcm_set_bdaddr;
+
+	err = btbcm_initialize(hu->hdev, fw_name, sizeof(fw_name));
+	if (err)
+		return err;
+
+	err = request_firmware(&fw, fw_name, &hu->hdev->dev);
+	if (err < 0) {
+		BT_INFO("%s: BCM: Patch %s not found", hu->hdev->name, fw_name);
+		return 0;
+	}
+
+	err = btbcm_patchram(hu->hdev, fw);
+	if (err) {
+		BT_INFO("%s: BCM: Patch failed (%d)", hu->hdev->name, err);
+		goto finalize;
+	}
+
+	/* Init speed if any */
+	if (hu->init_speed)
+		speed = hu->init_speed;
+	else if (hu->proto->init_speed)
+		speed = hu->proto->init_speed;
+	else
+		speed = 0;
+
+	if (speed)
+		hci_uart_set_baudrate(hu, speed);
+
+	/* Operational speed if any */
+	if (hu->oper_speed)
+		speed = hu->oper_speed;
+	else if (hu->proto->oper_speed)
+		speed = hu->proto->oper_speed;
+	else
+		speed = 0;
+
+	if (speed) {
+		err = bcm_set_baudrate(hu, speed);
+		if (!err)
+			hci_uart_set_baudrate(hu, speed);
+	}
+
+finalize:
+	release_firmware(fw);
+
+	err = btbcm_finalize(hu->hdev);
+
+	return err;
+}
+
+static const struct h4_recv_pkt bcm_recv_pkts[] = {
+	{ H4_RECV_ACL,   .recv = hci_recv_frame },
+	{ H4_RECV_SCO,   .recv = hci_recv_frame },
+	{ H4_RECV_EVENT, .recv = hci_recv_frame },
+};
+
+static int bcm_recv(struct hci_uart *hu, const void *data, int count)
+{
+	struct bcm_data *bcm = hu->priv;
+
+	if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
+		return -EUNATCH;
+
+	bcm->rx_skb = h4_recv_buf(hu->hdev, bcm->rx_skb, data, count,
+				  bcm_recv_pkts, ARRAY_SIZE(bcm_recv_pkts));
+	if (IS_ERR(bcm->rx_skb)) {
+		int err = PTR_ERR(bcm->rx_skb);
+		BT_ERR("%s: Frame reassembly failed (%d)", hu->hdev->name, err);
+		bcm->rx_skb = NULL;
+		return err;
+	}
+
+	return count;
+}
+
+static int bcm_enqueue(struct hci_uart *hu, struct sk_buff *skb)
+{
+	struct bcm_data *bcm = hu->priv;
+
+	BT_DBG("hu %p skb %p", hu, skb);
+
+	/* Prepend skb with frame type */
+	memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
+	skb_queue_tail(&bcm->txq, skb);
+
+	return 0;
+}
+
+static struct sk_buff *bcm_dequeue(struct hci_uart *hu)
+{
+	struct bcm_data *bcm = hu->priv;
+
+	return skb_dequeue(&bcm->txq);
+}
+
+static const struct hci_uart_proto bcm_proto = {
+	.id		= HCI_UART_BCM,
+	.name		= "BCM",
+	.init_speed	= 115200,
+	.oper_speed	= 4000000,
+	.open		= bcm_open,
+	.close		= bcm_close,
+	.flush		= bcm_flush,
+	.setup		= bcm_setup,
+	.set_baudrate	= bcm_set_baudrate,
+	.recv		= bcm_recv,
+	.enqueue	= bcm_enqueue,
+	.dequeue	= bcm_dequeue,
+};
+
+int __init bcm_init(void)
+{
+	return hci_uart_register_proto(&bcm_proto);
+}
+
+int __exit bcm_deinit(void)
+{
+	return hci_uart_unregister_proto(&bcm_proto);
+}
diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c
index 21cc45b34f13..d0b615a932d1 100644
--- a/drivers/bluetooth/hci_bcsp.c
+++ b/drivers/bluetooth/hci_bcsp.c
@@ -47,10 +47,8 @@
 
 #include "hci_uart.h"
 
-#define VERSION "0.3"
-
-static bool txcrc = 1;
-static bool hciextn = 1;
+static bool txcrc = true;
+static bool hciextn = true;
 
 #define BCSP_TXWINSIZE	4
 
@@ -438,7 +436,7 @@ static inline void bcsp_unslip_one_byte(struct bcsp_struct *bcsp, unsigned char
 			break;
 		default:
 			memcpy(skb_put(bcsp->rx_skb, 1), &byte, 1);
-			if ((bcsp->rx_skb-> data[0] & 0x40) != 0 && 
+			if ((bcsp->rx_skb->data[0] & 0x40) != 0 &&
 					bcsp->rx_state != BCSP_W4_CRC)
 				bcsp_crc_update(&bcsp->message_crc, byte);
 			bcsp->rx_count--;
@@ -449,24 +447,24 @@ static inline void bcsp_unslip_one_byte(struct bcsp_struct *bcsp, unsigned char
 		switch (byte) {
 		case 0xdc:
 			memcpy(skb_put(bcsp->rx_skb, 1), &c0, 1);
-			if ((bcsp->rx_skb-> data[0] & 0x40) != 0 && 
+			if ((bcsp->rx_skb->data[0] & 0x40) != 0 &&
 					bcsp->rx_state != BCSP_W4_CRC)
-				bcsp_crc_update(&bcsp-> message_crc, 0xc0);
+				bcsp_crc_update(&bcsp->message_crc, 0xc0);
 			bcsp->rx_esc_state = BCSP_ESCSTATE_NOESC;
 			bcsp->rx_count--;
 			break;
 
 		case 0xdd:
 			memcpy(skb_put(bcsp->rx_skb, 1), &db, 1);
-			if ((bcsp->rx_skb-> data[0] & 0x40) != 0 && 
+			if ((bcsp->rx_skb->data[0] & 0x40) != 0 &&
 					bcsp->rx_state != BCSP_W4_CRC) 
-				bcsp_crc_update(&bcsp-> message_crc, 0xdb);
+				bcsp_crc_update(&bcsp->message_crc, 0xdb);
 			bcsp->rx_esc_state = BCSP_ESCSTATE_NOESC;
 			bcsp->rx_count--;
 			break;
 
 		default:
-			BT_ERR ("Invalid byte %02x after esc byte", byte);
+			BT_ERR("Invalid byte %02x after esc byte", byte);
 			kfree_skb(bcsp->rx_skb);
 			bcsp->rx_skb = NULL;
 			bcsp->rx_state = BCSP_W4_PKT_DELIMITER;
@@ -529,7 +527,7 @@ static void bcsp_complete_rx_pkt(struct hci_uart *hu)
 
 				hci_recv_frame(hu->hdev, bcsp->rx_skb);
 			} else {
-				BT_ERR ("Packet for unknown channel (%u %s)",
+				BT_ERR("Packet for unknown channel (%u %s)",
 					bcsp->rx_skb->data[1] & 0x0f,
 					bcsp->rx_skb->data[0] & 0x80 ? 
 					"reliable" : "unreliable");
@@ -554,10 +552,10 @@ static u16 bscp_get_crc(struct bcsp_struct *bcsp)
 }
 
 /* Recv data */
-static int bcsp_recv(struct hci_uart *hu, void *data, int count)
+static int bcsp_recv(struct hci_uart *hu, const void *data, int count)
 {
 	struct bcsp_struct *bcsp = hu->priv;
-	unsigned char *ptr;
+	const unsigned char *ptr;
 
 	BT_DBG("hu %p count %d rx_state %d rx_count %ld", 
 		hu, count, bcsp->rx_state, bcsp->rx_count);
@@ -589,7 +587,7 @@ static int bcsp_recv(struct hci_uart *hu, void *data, int count)
 			}
 			if (bcsp->rx_skb->data[0] & 0x80	/* reliable pkt */
 			    		&& (bcsp->rx_skb->data[0] & 0x07) != bcsp->rxseq_txack) {
-				BT_ERR ("Out-of-order packet arrived, got %u expected %u",
+				BT_ERR("Out-of-order packet arrived, got %u expected %u",
 					bcsp->rx_skb->data[0] & 0x07, bcsp->rxseq_txack);
 
 				kfree_skb(bcsp->rx_skb);
@@ -735,8 +733,9 @@ static int bcsp_close(struct hci_uart *hu)
 	return 0;
 }
 
-static struct hci_uart_proto bcsp = {
+static const struct hci_uart_proto bcsp = {
 	.id		= HCI_UART_BCSP,
+	.name		= "BCSP",
 	.open		= bcsp_open,
 	.close		= bcsp_close,
 	.enqueue	= bcsp_enqueue,
@@ -747,14 +746,7 @@ static struct hci_uart_proto bcsp = {
 
 int __init bcsp_init(void)
 {
-	int err = hci_uart_register_proto(&bcsp);
-
-	if (!err)
-		BT_INFO("HCI BCSP protocol initialized");
-	else
-		BT_ERR("HCI BCSP protocol registration failed");
-
-	return err;
+	return hci_uart_register_proto(&bcsp);
 }
 
 int __exit bcsp_deinit(void)
diff --git a/drivers/bluetooth/hci_h4.c b/drivers/bluetooth/hci_h4.c
index 66db9a803373..57faddc53645 100644
--- a/drivers/bluetooth/hci_h4.c
+++ b/drivers/bluetooth/hci_h4.c
@@ -40,17 +40,14 @@
 #include <linux/signal.h>
 #include <linux/ioctl.h>
 #include <linux/skbuff.h>
+#include <asm/unaligned.h>
 
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
 
 #include "hci_uart.h"
 
-#define VERSION "1.2"
-
 struct h4_struct {
-	unsigned long rx_state;
-	unsigned long rx_count;
 	struct sk_buff *rx_skb;
 	struct sk_buff_head txq;
 };
@@ -117,18 +114,27 @@ static int h4_enqueue(struct hci_uart *hu, struct sk_buff *skb)
 	return 0;
 }
 
+static const struct h4_recv_pkt h4_recv_pkts[] = {
+	{ H4_RECV_ACL,   .recv = hci_recv_frame },
+	{ H4_RECV_SCO,   .recv = hci_recv_frame },
+	{ H4_RECV_EVENT, .recv = hci_recv_frame },
+};
+
 /* Recv data */
-static int h4_recv(struct hci_uart *hu, void *data, int count)
+static int h4_recv(struct hci_uart *hu, const void *data, int count)
 {
-	int ret;
+	struct h4_struct *h4 = hu->priv;
 
 	if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
 		return -EUNATCH;
 
-	ret = hci_recv_stream_fragment(hu->hdev, data, count);
-	if (ret < 0) {
-		BT_ERR("Frame Reassembly Failed");
-		return ret;
+	h4->rx_skb = h4_recv_buf(hu->hdev, h4->rx_skb, data, count,
+				 h4_recv_pkts, ARRAY_SIZE(h4_recv_pkts));
+	if (IS_ERR(h4->rx_skb)) {
+		int err = PTR_ERR(h4->rx_skb);
+		BT_ERR("%s: Frame reassembly failed (%d)", hu->hdev->name, err);
+		h4->rx_skb = NULL;
+		return err;
 	}
 
 	return count;
@@ -140,8 +146,9 @@ static struct sk_buff *h4_dequeue(struct hci_uart *hu)
 	return skb_dequeue(&h4->txq);
 }
 
-static struct hci_uart_proto h4p = {
+static const struct hci_uart_proto h4p = {
 	.id		= HCI_UART_H4,
+	.name		= "H4",
 	.open		= h4_open,
 	.close		= h4_close,
 	.recv		= h4_recv,
@@ -152,17 +159,105 @@ static struct hci_uart_proto h4p = {
 
 int __init h4_init(void)
 {
-	int err = hci_uart_register_proto(&h4p);
-
-	if (!err)
-		BT_INFO("HCI H4 protocol initialized");
-	else
-		BT_ERR("HCI H4 protocol registration failed");
-
-	return err;
+	return hci_uart_register_proto(&h4p);
 }
 
 int __exit h4_deinit(void)
 {
 	return hci_uart_unregister_proto(&h4p);
 }
+
+struct sk_buff *h4_recv_buf(struct hci_dev *hdev, struct sk_buff *skb,
+			    const unsigned char *buffer, int count,
+			    const struct h4_recv_pkt *pkts, int pkts_count)
+{
+	while (count) {
+		int i, len;
+
+		if (!skb) {
+			for (i = 0; i < pkts_count; i++) {
+				if (buffer[0] != (&pkts[i])->type)
+					continue;
+
+				skb = bt_skb_alloc((&pkts[i])->maxlen,
+						   GFP_ATOMIC);
+				if (!skb)
+					return ERR_PTR(-ENOMEM);
+
+				bt_cb(skb)->pkt_type = (&pkts[i])->type;
+				bt_cb(skb)->expect = (&pkts[i])->hlen;
+				break;
+			}
+
+			/* Check for invalid packet type */
+			if (!skb)
+				return ERR_PTR(-EILSEQ);
+
+			count -= 1;
+			buffer += 1;
+		}
+
+		len = min_t(uint, bt_cb(skb)->expect - skb->len, count);
+		memcpy(skb_put(skb, len), buffer, len);
+
+		count -= len;
+		buffer += len;
+
+		/* Check for partial packet */
+		if (skb->len < bt_cb(skb)->expect)
+			continue;
+
+		for (i = 0; i < pkts_count; i++) {
+			if (bt_cb(skb)->pkt_type == (&pkts[i])->type)
+				break;
+		}
+
+		if (i >= pkts_count) {
+			kfree_skb(skb);
+			return ERR_PTR(-EILSEQ);
+		}
+
+		if (skb->len == (&pkts[i])->hlen) {
+			u16 dlen;
+
+			switch ((&pkts[i])->lsize) {
+			case 0:
+				/* No variable data length */
+				(&pkts[i])->recv(hdev, skb);
+				skb = NULL;
+				break;
+			case 1:
+				/* Single octet variable length */
+				dlen = skb->data[(&pkts[i])->loff];
+				bt_cb(skb)->expect += dlen;
+
+				if (skb_tailroom(skb) < dlen) {
+					kfree_skb(skb);
+					return ERR_PTR(-EMSGSIZE);
+				}
+				break;
+			case 2:
+				/* Double octet variable length */
+				dlen = get_unaligned_le16(skb->data +
+							  (&pkts[i])->loff);
+				bt_cb(skb)->expect += dlen;
+
+				if (skb_tailroom(skb) < dlen) {
+					kfree_skb(skb);
+					return ERR_PTR(-EMSGSIZE);
+				}
+				break;
+			default:
+				/* Unsupported variable length */
+				kfree_skb(skb);
+				return ERR_PTR(-EILSEQ);
+			}
+		} else {
+			/* Complete frame */
+			(&pkts[i])->recv(hdev, skb);
+			skb = NULL;
+		}
+	}
+
+	return skb;
+}
diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index ec0fa7732c0d..3455cecc9ecf 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -511,10 +511,10 @@ static void h5_reset_rx(struct h5 *h5)
 	clear_bit(H5_RX_ESC, &h5->flags);
 }
 
-static int h5_recv(struct hci_uart *hu, void *data, int count)
+static int h5_recv(struct hci_uart *hu, const void *data, int count)
 {
 	struct h5 *h5 = hu->priv;
-	unsigned char *ptr = data;
+	const unsigned char *ptr = data;
 
 	BT_DBG("%s pending %zu count %d", hu->hdev->name, h5->rx_pending,
 	       count);
@@ -743,8 +743,9 @@ static int h5_flush(struct hci_uart *hu)
 	return 0;
 }
 
-static struct hci_uart_proto h5p = {
+static const struct hci_uart_proto h5p = {
 	.id		= HCI_UART_3WIRE,
+	.name		= "Three-wire (H5)",
 	.open		= h5_open,
 	.close		= h5_close,
 	.recv		= h5_recv,
@@ -755,14 +756,7 @@ static struct hci_uart_proto h5p = {
 
 int __init h5_init(void)
 {
-	int err = hci_uart_register_proto(&h5p);
-
-	if (!err)
-		BT_INFO("HCI Three-wire UART (H5) protocol initialized");
-	else
-		BT_ERR("HCI Three-wire UART (H5) protocol init failed");
-
-	return err;
+	return hci_uart_register_proto(&h5p);
 }
 
 int __exit h5_deinit(void)
diff --git a/drivers/bluetooth/hci_intel.c b/drivers/bluetooth/hci_intel.c
new file mode 100644
index 000000000000..5dd07bf05236
--- /dev/null
+++ b/drivers/bluetooth/hci_intel.c
@@ -0,0 +1,31 @@
+/*
+ *
+ *  Bluetooth HCI UART driver for Intel devices
+ *
+ *  Copyright (C) 2015  Intel Corporation
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/skbuff.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "hci_uart.h"
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index dc487b5d1156..177dd69fdd95 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -40,17 +40,20 @@
 #include <linux/signal.h>
 #include <linux/ioctl.h>
 #include <linux/skbuff.h>
+#include <linux/firmware.h>
 
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
 
+#include "btintel.h"
+#include "btbcm.h"
 #include "hci_uart.h"
 
-#define VERSION "2.2"
+#define VERSION "2.3"
 
-static struct hci_uart_proto *hup[HCI_UART_MAX_PROTO];
+static const struct hci_uart_proto *hup[HCI_UART_MAX_PROTO];
 
-int hci_uart_register_proto(struct hci_uart_proto *p)
+int hci_uart_register_proto(const struct hci_uart_proto *p)
 {
 	if (p->id >= HCI_UART_MAX_PROTO)
 		return -EINVAL;
@@ -60,10 +63,12 @@ int hci_uart_register_proto(struct hci_uart_proto *p)
 
 	hup[p->id] = p;
 
+	BT_INFO("HCI UART protocol %s registered", p->name);
+
 	return 0;
 }
 
-int hci_uart_unregister_proto(struct hci_uart_proto *p)
+int hci_uart_unregister_proto(const struct hci_uart_proto *p)
 {
 	if (p->id >= HCI_UART_MAX_PROTO)
 		return -EINVAL;
@@ -76,7 +81,7 @@ int hci_uart_unregister_proto(struct hci_uart_proto *p)
 	return 0;
 }
 
-static struct hci_uart_proto *hci_uart_get_proto(unsigned int id)
+static const struct hci_uart_proto *hci_uart_get_proto(unsigned int id)
 {
 	if (id >= HCI_UART_MAX_PROTO)
 		return NULL;
@@ -261,6 +266,176 @@ static int hci_uart_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
 	return 0;
 }
 
+/* Flow control or un-flow control the device */
+void hci_uart_set_flow_control(struct hci_uart *hu, bool enable)
+{
+	struct tty_struct *tty = hu->tty;
+	struct ktermios ktermios;
+	int status;
+	unsigned int set = 0;
+	unsigned int clear = 0;
+
+	if (enable) {
+		/* Disable hardware flow control */
+		ktermios = tty->termios;
+		ktermios.c_cflag &= ~CRTSCTS;
+		status = tty_set_termios(tty, &ktermios);
+		BT_DBG("Disabling hardware flow control: %s",
+		       status ? "failed" : "success");
+
+		/* Clear RTS to prevent the device from sending */
+		/* Most UARTs need OUT2 to enable interrupts */
+		status = tty->driver->ops->tiocmget(tty);
+		BT_DBG("Current tiocm 0x%x", status);
+
+		set &= ~(TIOCM_OUT2 | TIOCM_RTS);
+		clear = ~set;
+		set &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 |
+		       TIOCM_OUT2 | TIOCM_LOOP;
+		clear &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 |
+			 TIOCM_OUT2 | TIOCM_LOOP;
+		status = tty->driver->ops->tiocmset(tty, set, clear);
+		BT_DBG("Clearing RTS: %s", status ? "failed" : "success");
+	} else {
+		/* Set RTS to allow the device to send again */
+		status = tty->driver->ops->tiocmget(tty);
+		BT_DBG("Current tiocm 0x%x", status);
+
+		set |= (TIOCM_OUT2 | TIOCM_RTS);
+		clear = ~set;
+		set &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 |
+		       TIOCM_OUT2 | TIOCM_LOOP;
+		clear &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 |
+			 TIOCM_OUT2 | TIOCM_LOOP;
+		status = tty->driver->ops->tiocmset(tty, set, clear);
+		BT_DBG("Setting RTS: %s", status ? "failed" : "success");
+
+		/* Re-enable hardware flow control */
+		ktermios = tty->termios;
+		ktermios.c_cflag |= CRTSCTS;
+		status = tty_set_termios(tty, &ktermios);
+		BT_DBG("Enabling hardware flow control: %s",
+		       status ? "failed" : "success");
+	}
+}
+
+void hci_uart_set_speeds(struct hci_uart *hu, unsigned int init_speed,
+			 unsigned int oper_speed)
+{
+	hu->init_speed = init_speed;
+	hu->oper_speed = oper_speed;
+}
+
+void hci_uart_init_tty(struct hci_uart *hu)
+{
+	struct tty_struct *tty = hu->tty;
+	struct ktermios ktermios;
+
+	/* Bring the UART into a known 8 bits no parity hw fc state */
+	ktermios = tty->termios;
+	ktermios.c_iflag &= ~(IGNBRK | BRKINT | PARMRK | ISTRIP |
+			      INLCR | IGNCR | ICRNL | IXON);
+	ktermios.c_oflag &= ~OPOST;
+	ktermios.c_lflag &= ~(ECHO | ECHONL | ICANON | ISIG | IEXTEN);
+	ktermios.c_cflag &= ~(CSIZE | PARENB);
+	ktermios.c_cflag |= CS8;
+	ktermios.c_cflag |= CRTSCTS;
+
+	/* tty_set_termios() return not checked as it is always 0 */
+	tty_set_termios(tty, &ktermios);
+}
+
+void hci_uart_set_baudrate(struct hci_uart *hu, unsigned int speed)
+{
+	struct tty_struct *tty = hu->tty;
+	struct ktermios ktermios;
+
+	ktermios = tty->termios;
+	ktermios.c_cflag &= ~CBAUD;
+	tty_termios_encode_baud_rate(&ktermios, speed, speed);
+
+	/* tty_set_termios() return not checked as it is always 0 */
+	tty_set_termios(tty, &ktermios);
+
+	BT_DBG("%s: New tty speeds: %d/%d", hu->hdev->name,
+	       tty->termios.c_ispeed, tty->termios.c_ospeed);
+}
+
+static int hci_uart_setup(struct hci_dev *hdev)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct hci_rp_read_local_version *ver;
+	struct sk_buff *skb;
+	unsigned int speed;
+	int err;
+
+	/* Init speed if any */
+	if (hu->init_speed)
+		speed = hu->init_speed;
+	else if (hu->proto->init_speed)
+		speed = hu->proto->init_speed;
+	else
+		speed = 0;
+
+	if (speed)
+		hci_uart_set_baudrate(hu, speed);
+
+	/* Operational speed if any */
+	if (hu->oper_speed)
+		speed = hu->oper_speed;
+	else if (hu->proto->oper_speed)
+		speed = hu->proto->oper_speed;
+	else
+		speed = 0;
+
+	if (hu->proto->set_baudrate && speed) {
+		err = hu->proto->set_baudrate(hu, speed);
+		if (!err)
+			hci_uart_set_baudrate(hu, speed);
+	}
+
+	if (hu->proto->setup)
+		return hu->proto->setup(hu);
+
+	if (!test_bit(HCI_UART_VND_DETECT, &hu->hdev_flags))
+		return 0;
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s: Reading local version information failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return 0;
+	}
+
+	if (skb->len != sizeof(*ver)) {
+		BT_ERR("%s: Event length mismatch for version information",
+		       hdev->name);
+		goto done;
+	}
+
+	ver = (struct hci_rp_read_local_version *)skb->data;
+
+	switch (le16_to_cpu(ver->manufacturer)) {
+#ifdef CONFIG_BT_HCIUART_INTEL
+	case 2:
+		hdev->set_bdaddr = btintel_set_bdaddr;
+		btintel_check_bdaddr(hdev);
+		break;
+#endif
+#ifdef CONFIG_BT_HCIUART_BCM
+	case 15:
+		hdev->set_bdaddr = btbcm_set_bdaddr;
+		btbcm_check_bdaddr(hdev);
+		break;
+#endif
+	}
+
+done:
+	kfree_skb(skb);
+	return 0;
+}
+
 /* ------ LDISC part ------ */
 /* hci_uart_tty_open
  *
@@ -316,7 +491,7 @@ static int hci_uart_tty_open(struct tty_struct *tty)
  */
 static void hci_uart_tty_close(struct tty_struct *tty)
 {
-	struct hci_uart *hu = (void *)tty->disc_data;
+	struct hci_uart *hu = tty->disc_data;
 	struct hci_dev *hdev;
 
 	BT_DBG("tty %p", tty);
@@ -355,7 +530,7 @@ static void hci_uart_tty_close(struct tty_struct *tty)
  */
 static void hci_uart_tty_wakeup(struct tty_struct *tty)
 {
-	struct hci_uart *hu = (void *)tty->disc_data;
+	struct hci_uart *hu = tty->disc_data;
 
 	BT_DBG("");
 
@@ -383,9 +558,10 @@ static void hci_uart_tty_wakeup(struct tty_struct *tty)
  *
  * Return Value:    None
  */
-static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data, char *flags, int count)
+static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data,
+				 char *flags, int count)
 {
-	struct hci_uart *hu = (void *)tty->disc_data;
+	struct hci_uart *hu = tty->disc_data;
 
 	if (!hu || tty != hu->tty)
 		return;
@@ -394,7 +570,7 @@ static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data, char *f
 		return;
 
 	spin_lock(&hu->rx_lock);
-	hu->proto->recv(hu, (void *) data, count);
+	hu->proto->recv(hu, data, count);
 
 	if (hu->hdev)
 		hu->hdev->stat.byte_rx += count;
@@ -426,6 +602,7 @@ static int hci_uart_register_dev(struct hci_uart *hu)
 	hdev->close = hci_uart_close;
 	hdev->flush = hci_uart_flush;
 	hdev->send  = hci_uart_send_frame;
+	hdev->setup = hci_uart_setup;
 	SET_HCIDEV_DEV(hdev, hu->tty->dev);
 
 	if (test_bit(HCI_UART_RAW_DEVICE, &hu->hdev_flags))
@@ -458,7 +635,7 @@ static int hci_uart_register_dev(struct hci_uart *hu)
 
 static int hci_uart_set_proto(struct hci_uart *hu, int id)
 {
-	struct hci_uart_proto *p;
+	const struct hci_uart_proto *p;
 	int err;
 
 	p = hci_uart_get_proto(id);
@@ -486,9 +663,10 @@ static int hci_uart_set_flags(struct hci_uart *hu, unsigned long flags)
 				    BIT(HCI_UART_RESET_ON_INIT) |
 				    BIT(HCI_UART_CREATE_AMP) |
 				    BIT(HCI_UART_INIT_PENDING) |
-				    BIT(HCI_UART_EXT_CONFIG);
+				    BIT(HCI_UART_EXT_CONFIG) |
+				    BIT(HCI_UART_VND_DETECT);
 
-	if ((flags & ~valid_flags))
+	if (flags & ~valid_flags)
 		return -EINVAL;
 
 	hu->hdev_flags = flags;
@@ -509,10 +687,10 @@ static int hci_uart_set_flags(struct hci_uart *hu, unsigned long flags)
  *
  * Return Value:    Command dependent
  */
-static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file * file,
-					unsigned int cmd, unsigned long arg)
+static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file *file,
+			      unsigned int cmd, unsigned long arg)
 {
-	struct hci_uart *hu = (void *)tty->disc_data;
+	struct hci_uart *hu = tty->disc_data;
 	int err = 0;
 
 	BT_DBG("");
@@ -566,19 +744,19 @@ static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file * file,
  * We don't provide read/write/poll interface for user space.
  */
 static ssize_t hci_uart_tty_read(struct tty_struct *tty, struct file *file,
-					unsigned char __user *buf, size_t nr)
+				 unsigned char __user *buf, size_t nr)
 {
 	return 0;
 }
 
 static ssize_t hci_uart_tty_write(struct tty_struct *tty, struct file *file,
-					const unsigned char *data, size_t count)
+				  const unsigned char *data, size_t count)
 {
 	return 0;
 }
 
 static unsigned int hci_uart_tty_poll(struct tty_struct *tty,
-					struct file *filp, poll_table *wait)
+				      struct file *filp, poll_table *wait)
 {
 	return 0;
 }
@@ -626,6 +804,9 @@ static int __init hci_uart_init(void)
 #ifdef CONFIG_BT_HCIUART_3WIRE
 	h5_init();
 #endif
+#ifdef CONFIG_BT_HCIUART_BCM
+	bcm_init();
+#endif
 
 	return 0;
 }
@@ -649,6 +830,9 @@ static void __exit hci_uart_exit(void)
 #ifdef CONFIG_BT_HCIUART_3WIRE
 	h5_deinit();
 #endif
+#ifdef CONFIG_BT_HCIUART_BCM
+	bcm_deinit();
+#endif
 
 	/* Release tty registration of line discipline */
 	err = tty_unregister_ldisc(N_HCI);
diff --git a/drivers/bluetooth/hci_ll.c b/drivers/bluetooth/hci_ll.c
index 69a90b1b5ff5..9ee24b075f79 100644
--- a/drivers/bluetooth/hci_ll.c
+++ b/drivers/bluetooth/hci_ll.c
@@ -370,10 +370,10 @@ static inline int ll_check_data_len(struct hci_dev *hdev, struct ll_struct *ll,
 }
 
 /* Recv data */
-static int ll_recv(struct hci_uart *hu, void *data, int count)
+static int ll_recv(struct hci_uart *hu, const void *data, int count)
 {
 	struct ll_struct *ll = hu->priv;
-	char *ptr;
+	const char *ptr;
 	struct hci_event_hdr *eh;
 	struct hci_acl_hdr   *ah;
 	struct hci_sco_hdr   *sh;
@@ -505,8 +505,9 @@ static struct sk_buff *ll_dequeue(struct hci_uart *hu)
 	return skb_dequeue(&ll->txq);
 }
 
-static struct hci_uart_proto llp = {
+static const struct hci_uart_proto llp = {
 	.id		= HCI_UART_LL,
+	.name		= "LL",
 	.open		= ll_open,
 	.close		= ll_close,
 	.recv		= ll_recv,
@@ -517,14 +518,7 @@ static struct hci_uart_proto llp = {
 
 int __init ll_init(void)
 {
-	int err = hci_uart_register_proto(&llp);
-
-	if (!err)
-		BT_INFO("HCILL protocol initialized");
-	else
-		BT_ERR("HCILL protocol registration failed");
-
-	return err;
+	return hci_uart_register_proto(&llp);
 }
 
 int __exit ll_deinit(void)
diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h
index 247488edcbf9..ce9c670956f5 100644
--- a/drivers/bluetooth/hci_uart.h
+++ b/drivers/bluetooth/hci_uart.h
@@ -35,7 +35,7 @@
 #define HCIUARTGETFLAGS		_IOR('U', 204, int)
 
 /* UART protocols */
-#define HCI_UART_MAX_PROTO	6
+#define HCI_UART_MAX_PROTO	8
 
 #define HCI_UART_H4	0
 #define HCI_UART_BCSP	1
@@ -43,21 +43,29 @@
 #define HCI_UART_H4DS	3
 #define HCI_UART_LL	4
 #define HCI_UART_ATH3K	5
+#define HCI_UART_INTEL	6
+#define HCI_UART_BCM	7
 
 #define HCI_UART_RAW_DEVICE	0
 #define HCI_UART_RESET_ON_INIT	1
 #define HCI_UART_CREATE_AMP	2
 #define HCI_UART_INIT_PENDING	3
 #define HCI_UART_EXT_CONFIG	4
+#define HCI_UART_VND_DETECT	5
 
 struct hci_uart;
 
 struct hci_uart_proto {
 	unsigned int id;
+	const char *name;
+	unsigned int init_speed;
+	unsigned int oper_speed;
 	int (*open)(struct hci_uart *hu);
 	int (*close)(struct hci_uart *hu);
 	int (*flush)(struct hci_uart *hu);
-	int (*recv)(struct hci_uart *hu, void *data, int len);
+	int (*setup)(struct hci_uart *hu);
+	int (*set_baudrate)(struct hci_uart *hu, unsigned int speed);
+	int (*recv)(struct hci_uart *hu, const void *data, int len);
 	int (*enqueue)(struct hci_uart *hu, struct sk_buff *skb);
 	struct sk_buff *(*dequeue)(struct hci_uart *hu);
 };
@@ -71,12 +79,15 @@ struct hci_uart {
 	struct work_struct	init_ready;
 	struct work_struct	write_work;
 
-	struct hci_uart_proto	*proto;
+	const struct hci_uart_proto *proto;
 	void			*priv;
 
 	struct sk_buff		*tx_skb;
 	unsigned long		tx_state;
 	spinlock_t		rx_lock;
+
+	unsigned int init_speed;
+	unsigned int oper_speed;
 };
 
 /* HCI_UART proto flag bits */
@@ -87,14 +98,53 @@ struct hci_uart {
 #define HCI_UART_SENDING	1
 #define HCI_UART_TX_WAKEUP	2
 
-int hci_uart_register_proto(struct hci_uart_proto *p);
-int hci_uart_unregister_proto(struct hci_uart_proto *p);
+int hci_uart_register_proto(const struct hci_uart_proto *p);
+int hci_uart_unregister_proto(const struct hci_uart_proto *p);
 int hci_uart_tx_wakeup(struct hci_uart *hu);
 int hci_uart_init_ready(struct hci_uart *hu);
+void hci_uart_init_tty(struct hci_uart *hu);
+void hci_uart_set_baudrate(struct hci_uart *hu, unsigned int speed);
+void hci_uart_set_flow_control(struct hci_uart *hu, bool enable);
+void hci_uart_set_speeds(struct hci_uart *hu, unsigned int init_speed,
+			 unsigned int oper_speed);
 
 #ifdef CONFIG_BT_HCIUART_H4
 int h4_init(void);
 int h4_deinit(void);
+
+struct h4_recv_pkt {
+	u8  type;	/* Packet type */
+	u8  hlen;	/* Header length */
+	u8  loff;	/* Data length offset in header */
+	u8  lsize;	/* Data length field size */
+	u16 maxlen;	/* Max overall packet length */
+	int (*recv)(struct hci_dev *hdev, struct sk_buff *skb);
+};
+
+#define H4_RECV_ACL \
+	.type = HCI_ACLDATA_PKT, \
+	.hlen = HCI_ACL_HDR_SIZE, \
+	.loff = 2, \
+	.lsize = 2, \
+	.maxlen = HCI_MAX_FRAME_SIZE \
+
+#define H4_RECV_SCO \
+	.type = HCI_SCODATA_PKT, \
+	.hlen = HCI_SCO_HDR_SIZE, \
+	.loff = 2, \
+	.lsize = 1, \
+	.maxlen = HCI_MAX_SCO_SIZE
+
+#define H4_RECV_EVENT \
+	.type = HCI_EVENT_PKT, \
+	.hlen = HCI_EVENT_HDR_SIZE, \
+	.loff = 1, \
+	.lsize = 1, \
+	.maxlen = HCI_MAX_EVENT_SIZE
+
+struct sk_buff *h4_recv_buf(struct hci_dev *hdev, struct sk_buff *skb,
+			    const unsigned char *buffer, int count,
+			    const struct h4_recv_pkt *pkts, int pkts_count);
 #endif
 
 #ifdef CONFIG_BT_HCIUART_BCSP
@@ -116,3 +166,8 @@ int ath_deinit(void);
 int h5_init(void);
 int h5_deinit(void);
 #endif
+
+#ifdef CONFIG_BT_HCIUART_BCM
+int bcm_init(void);
+int bcm_deinit(void);
+#endif
diff --git a/drivers/bluetooth/hci_vhci.c b/drivers/bluetooth/hci_vhci.c
index 6653473f2757..78653db2ef2b 100644
--- a/drivers/bluetooth/hci_vhci.c
+++ b/drivers/bluetooth/hci_vhci.c
@@ -366,7 +366,7 @@ static const struct file_operations vhci_fops = {
 	.llseek		= no_llseek,
 };
 
-static struct miscdevice vhci_miscdev= {
+static struct miscdevice vhci_miscdev = {
 	.name	= "vhci",
 	.fops	= &vhci_fops,
 	.minor	= VHCI_MINOR,