powerpc/eeh: Selectively enable IO for error log

According to the experiment I did, PCI config access is blocked
on P7IOC frozen PE by hardware, but PHB3 doesn't do that. That
means we always get 0xFF's while dumping PCI config space of the
frozen PE on P7IOC. We don't have the problem on PHB3. So we have
to enable I/O prioir to collecting error log. Otherwise, meaningless
0xFF's are always returned.

The patch fixes it by EEH flag (EEH_ENABLE_IO_FOR_LOG), which is
selectively set to indicate the case for: P7IOC on PowerNV platform,
pSeries platform.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

4 files changed, 23 insertions, 6 deletions

diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index ca8aada95069..494c3fff4623 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -34,10 +34,11 @@ struct device_node;
 #ifdef CONFIG_EEH
 
 /* EEH subsystem flags */
-#define EEH_ENABLED		0x1	/* EEH enabled		*/
-#define EEH_FORCE_DISABLED	0x2	/* EEH disabled		*/
-#define EEH_PROBE_MODE_DEV	0x4	/* From PCI device	*/
-#define EEH_PROBE_MODE_DEVTREE	0x8	/* From device tree	*/
+#define EEH_ENABLED		0x01	/* EEH enabled		*/
+#define EEH_FORCE_DISABLED	0x02	/* EEH disabled		*/
+#define EEH_PROBE_MODE_DEV	0x04	/* From PCI device	*/
+#define EEH_PROBE_MODE_DEVTREE	0x08	/* From device tree	*/
+#define EEH_ENABLE_IO_FOR_LOG	0x10	/* Enable IO for log	*/
 
 /*
  * Delay for PE reset, all in ms
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 65a163fb7b6c..aa33656e9a22 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -252,7 +252,7 @@ void eeh_slot_error_detail(struct eeh_pe *pe, int severity)
 	 * 0xFF's is always returned from PCI config space.
 	 */
 	if (!(pe->type & EEH_PE_PHB)) {
-		if (eeh_has_flag(EEH_PROBE_MODE_DEVTREE))
+		if (eeh_has_flag(EEH_ENABLE_IO_FOR_LOG))
 			eeh_pci_enable(pe, EEH_OPT_THAW_MMIO);
 		eeh_ops->configure_bridge(pe);
 		eeh_pe_restore_bars(pe);
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 996d8844cbdf..0401f84f7b89 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -45,6 +45,9 @@
  */
 static int powernv_eeh_init(void)
 {
+	struct pci_controller *hose;
+	struct pnv_phb *phb;
+
 	/* We require OPALv3 */
 	if (!firmware_has_feature(FW_FEATURE_OPALv3)) {
 		pr_warning("%s: OPALv3 is required !\n", __func__);
@@ -54,6 +57,19 @@ static int powernv_eeh_init(void)
 	/* Set probe mode */
 	eeh_add_flag(EEH_PROBE_MODE_DEV);
 
+	/*
+	 * P7IOC blocks PCI config access to frozen PE, but PHB3
+	 * doesn't do that. So we have to selectively enable I/O
+	 * prior to collecting error log.
+	 */
+	list_for_each_entry(hose, &hose_list, list_node) {
+		phb = hose->private_data;
+
+		if (phb->model == PNV_PHB_MODEL_P7IOC)
+			eeh_add_flag(EEH_ENABLE_IO_FOR_LOG);
+		break;
+	}
+
 	return 0;
 }
 
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index ba94b5b8d58c..dd1874ca56d9 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -128,7 +128,7 @@ static int pseries_eeh_init(void)
 	}
 
 	/* Set EEH probe mode */
-	eeh_add_flag(EEH_PROBE_MODE_DEVTREE);
+	eeh_add_flag(EEH_PROBE_MODE_DEVTREE | EEH_ENABLE_IO_FOR_LOG);
 
 	return 0;
 }