Merge tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pul removal of obsolete architecture ports from Arnd Bergmann:
 "This removes the entire architecture code for blackfin, cris, frv,
  m32r, metag, mn10300, score, and tile, including the associated device
  drivers.

  I have been working with the (former) maintainers for each one to
  ensure that my interpretation was right and the code is definitely
  unused in mainline kernels. Many had fond memories of working on the
  respective ports to start with and getting them included in upstream,
  but also saw no point in keeping the port alive without any users.

  In the end, it seems that while the eight architectures are extremely
  different, they all suffered the same fate: There was one company in
  charge of an SoC line, a CPU microarchitecture and a software
  ecosystem, which was more costly than licensing newer off-the-shelf
  CPU cores from a third party (typically ARM, MIPS, or RISC-V). It
  seems that all the SoC product lines are still around, but have not
  used the custom CPU architectures for several years at this point. In
  contrast, CPU instruction sets that remain popular and have actively
  maintained kernel ports tend to all be used across multiple licensees.

  [ See the new nds32 port merged in the previous commit for the next
    generation of "one company in charge of an SoC line, a CPU
    microarchitecture and a software ecosystem"   - Linus ]

  The removal came out of a discussion that is now documented at
  https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
  marking any ports as deprecated but remove them all at once after I
  made sure that they are all unused. Some architectures (notably tile,
  mn10300, and blackfin) are still being shipped in products with old
  kernels, but those products will never be updated to newer kernel
  releases.

  After this series, we still have a few architectures without mainline
  gcc support:

   - unicore32 and hexagon both have very outdated gcc releases, but the
     maintainers promised to work on providing something newer. At least
     in case of hexagon, this will only be llvm, not gcc.

   - openrisc, risc-v and nds32 are still in the process of finishing
     their support or getting it added to mainline gcc in the first
     place. They all have patched gcc-7.3 ports that work to some
     degree, but complete upstream support won't happen before gcc-8.1.
     Csky posted their first kernel patch set last week, their situation
     will be similar

  [ Palmer Dabbelt points out that RISC-V support is in mainline gcc
    since gcc-7, although gcc-7.3.0 is the recommended minimum  - Linus ]"

This really says it all:

 2498 files changed, 95 insertions(+), 467668 deletions(-)

* tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits)
  MAINTAINERS: UNICORE32: Change email account
  staging: iio: remove iio-trig-bfin-timer driver
  tty: hvc: remove tile driver
  tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers
  serial: remove tile uart driver
  serial: remove m32r_sio driver
  serial: remove blackfin drivers
  serial: remove cris/etrax uart drivers
  usb: Remove Blackfin references in USB support
  usb: isp1362: remove blackfin arch glue
  usb: musb: remove blackfin port
  usb: host: remove tilegx platform glue
  pwm: remove pwm-bfin driver
  i2c: remove bfin-twi driver
  spi: remove blackfin related host drivers
  watchdog: remove bfin_wdt driver
  can: remove bfin_can driver
  mmc: remove bfin_sdh driver
  input: misc: remove blackfin rotary driver
  input: keyboard: remove bf54x driver
  ...

1 files changed, 0 insertions, 103 deletions

diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/dmactl-regs.h b/arch/mn10300/proc-mn2ws0050/include/proc/dmactl-regs.h
deleted file mode 100644
index 4c4319e241d1..000000000000
--- a/arch/mn10300/proc-mn2ws0050/include/proc/dmactl-regs.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/* MN2WS0050 on-board DMA controller registers
- *
- * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- */
-
-#ifndef _ASM_PROC_DMACTL_REGS_H
-#define _ASM_PROC_DMACTL_REGS_H
-
-#include <asm/cpu-regs.h>
-
-#ifdef __KERNEL__
-
-/* DMA registers */
-#define	DMxCTR(N)		__SYSREG(0xd4005000+(N*0x100), u32)	/* control reg */
-#define	DMxCTR_BG		0x0000001f	/* transfer request source */
-#define	DMxCTR_BG_SOFT		0x00000000	/* - software source */
-#define	DMxCTR_BG_SC0TX		0x00000002	/* - serial port 0 transmission */
-#define	DMxCTR_BG_SC0RX		0x00000003	/* - serial port 0 reception */
-#define	DMxCTR_BG_SC1TX		0x00000004	/* - serial port 1 transmission */
-#define	DMxCTR_BG_SC1RX		0x00000005	/* - serial port 1 reception */
-#define	DMxCTR_BG_SC2TX		0x00000006	/* - serial port 2 transmission */
-#define	DMxCTR_BG_SC2RX		0x00000007	/* - serial port 2 reception */
-#define	DMxCTR_BG_TM0UFLOW	0x00000008	/* - timer 0 underflow */
-#define	DMxCTR_BG_TM1UFLOW	0x00000009	/* - timer 1 underflow */
-#define	DMxCTR_BG_TM2UFLOW	0x0000000a	/* - timer 2 underflow */
-#define	DMxCTR_BG_TM3UFLOW	0x0000000b	/* - timer 3 underflow */
-#define	DMxCTR_BG_TM6ACMPCAP	0x0000000c	/* - timer 6A compare/capture */
-#define	DMxCTR_BG_RYBY		0x0000000d	/* - NAND Flash RY/BY request source */
-#define	DMxCTR_BG_RMC		0x0000000e	/* - remote controller output */
-#define	DMxCTR_BG_XIRQ12	0x00000011	/* - XIRQ12 pin interrupt source */
-#define	DMxCTR_BG_XIRQ13	0x00000012	/* - XIRQ13 pin interrupt source */
-#define	DMxCTR_BG_TCK		0x00000014	/* - tick timer underflow */
-#define	DMxCTR_BG_SC4TX		0x00000019	/* - serial port4 transmission */
-#define	DMxCTR_BG_SC4RX		0x0000001a	/* - serial port4 reception */
-#define	DMxCTR_BG_SC5TX		0x0000001b	/* - serial port5 transmission */
-#define	DMxCTR_BG_SC5RX		0x0000001c	/* - serial port5 reception */
-#define	DMxCTR_BG_SC6TX		0x0000001d	/* - serial port6 transmission */
-#define	DMxCTR_BG_SC6RX		0x0000001e	/* - serial port6 reception */
-#define	DMxCTR_BG_TMSUFLOW	0x0000001f	/* - timestamp timer underflow */
-#define	DMxCTR_SAM		0x00000060	/* DMA transfer src addr mode */
-#define	DMxCTR_SAM_INCR		0x00000000	/* - increment */
-#define	DMxCTR_SAM_DECR		0x00000020	/* - decrement */
-#define	DMxCTR_SAM_FIXED	0x00000040	/* - fixed */
-#define	DMxCTR_DAM		0x00000300	/* DMA transfer dest addr mode */
-#define	DMxCTR_DAM_INCR		0x00000000	/* - increment */
-#define	DMxCTR_DAM_DECR		0x00000100	/* - decrement */
-#define	DMxCTR_DAM_FIXED	0x00000200	/* - fixed */
-#define	DMxCTR_UT		0x00006000	/* DMA transfer unit */
-#define	DMxCTR_UT_1		0x00000000	/* - 1 byte */
-#define	DMxCTR_UT_2		0x00002000	/* - 2 byte */
-#define	DMxCTR_UT_4		0x00004000	/* - 4 byte */
-#define	DMxCTR_UT_16		0x00006000	/* - 16 byte */
-#define DMxCTR_RRE		0x00008000	/* DMA round robin enable */
-#define	DMxCTR_TEN		0x00010000	/* DMA channel transfer enable */
-#define	DMxCTR_RQM		0x00060000	/* external request input source mode */
-#define	DMxCTR_RQM_FALLEDGE	0x00000000	/* - falling edge */
-#define	DMxCTR_RQM_RISEEDGE	0x00020000	/* - rising edge */
-#define	DMxCTR_RQM_LOLEVEL	0x00040000	/* - low level */
-#define	DMxCTR_RQM_HILEVEL	0x00060000	/* - high level */
-#define	DMxCTR_RQF		0x01000000	/* DMA transfer request flag */
-#define	DMxCTR_PERR		0x40000000	/* DMA transfer parameter error flag */
-#define	DMxCTR_XEND		0x80000000	/* DMA transfer end flag */
-
-#define	DMxSRC(N)		__SYSREG(0xd4005004+(N*0x100), u32)	/* control reg */
-
-#define	DMxDST(N)		__SYSREG(0xd4005008+(N*0x100), u32)	/* source addr reg */
-
-#define	DMxSIZ(N)		__SYSREG(0xd400500c+(N*0x100), u32)	/* dest addr reg */
-#define DMxSIZ_CT		0x000fffff	/* number of bytes to transfer */
-
-#define	DMxCYC(N)		__SYSREG(0xd4005010+(N*0x100), u32)	/* intermittent size reg */
-#define DMxCYC_CYC		0x000000ff	/* number of interrmittent transfers -1 */
-
-#define DM0IRQ			16		/* DMA channel 0 complete IRQ */
-#define DM1IRQ			17		/* DMA channel 1 complete IRQ */
-#define DM2IRQ			18		/* DMA channel 2 complete IRQ */
-#define DM3IRQ			19		/* DMA channel 3 complete IRQ */
-
-#define	DM0ICR			GxICR(DM0IRQ)	/* DMA channel 0 complete intr ctrl reg */
-#define	DM1ICR			GxICR(DM0IR1)	/* DMA channel 1 complete intr ctrl reg */
-#define	DM2ICR			GxICR(DM0IR2)	/* DMA channel 2 complete intr ctrl reg */
-#define	DM3ICR			GxICR(DM0IR3)	/* DMA channel 3 complete intr ctrl reg */
-
-#ifndef __ASSEMBLY__
-
-struct mn10300_dmactl_regs {
-	u32		ctr;
-	const void	*src;
-	void		*dst;
-	u32		siz;
-	u32		cyc;
-} __attribute__((aligned(0x100)));
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_PROC_DMACTL_REGS_H */