Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

139 files changed, 0 insertions, 15835 deletions

diff --git a/arch/m68knommu/include/asm/Kbuild b/arch/m68knommu/include/asm/Kbuild
deleted file mode 100644
index c68e1680da01..000000000000
--- a/arch/m68knommu/include/asm/Kbuild
+++ /dev/null
@@ -1 +0,0 @@
-include include/asm-generic/Kbuild.asm
diff --git a/arch/m68knommu/include/asm/MC68328.h b/arch/m68knommu/include/asm/MC68328.h
deleted file mode 100644
index a337e56d09bf..000000000000
--- a/arch/m68knommu/include/asm/MC68328.h
+++ /dev/null
@@ -1,1266 +0,0 @@
-
-/* include/asm-m68knommu/MC68328.h: '328 control registers
- *
- * Copyright (C) 1999  Vladimir Gurevich <vgurevic@cisco.com>
- *                     Bear & Hare Software, Inc.
- *
- * Based on include/asm-m68knommu/MC68332.h
- * Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
- *
- */
-
-#ifndef _MC68328_H_
-#define _MC68328_H_
-
-#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
-#define WORD_REF(addr) (*((volatile unsigned short*)addr))
-#define LONG_REF(addr) (*((volatile unsigned long*)addr))
-
-#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
-#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
-
-/********** 
- *
- * 0xFFFFF0xx -- System Control
- *
- **********/
- 
-/*
- * System Control Register (SCR)
- */
-#define SCR_ADDR	0xfffff000
-#define SCR		BYTE_REF(SCR_ADDR)
-
-#define SCR_WDTH8	0x01	/* 8-Bit Width Select */
-#define SCR_DMAP	0x04	/* Double Map */
-#define SCR_SO		0x08	/* Supervisor Only */
-#define SCR_BETEN	0x10	/* Bus-Error Time-Out Enable */
-#define SCR_PRV		0x20	/* Privilege Violation */
-#define SCR_WPV		0x40	/* Write Protect Violation */
-#define SCR_BETO	0x80	/* Bus-Error TimeOut */
-
-/*
- * Mask Revision Register
- */
-#define MRR_ADDR 0xfffff004
-#define MRR      LONG_REF(MRR_ADDR)
- 
-/********** 
- *
- * 0xFFFFF1xx -- Chip-Select logic
- *
- **********/
-
-/********** 
- *
- * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
- *
- **********/
-
-/*
- * Group Base Address Registers
- */
-#define GRPBASEA_ADDR	0xfffff100
-#define GRPBASEB_ADDR	0xfffff102
-#define GRPBASEC_ADDR	0xfffff104
-#define GRPBASED_ADDR	0xfffff106
-
-#define GRPBASEA	WORD_REF(GRPBASEA_ADDR)
-#define GRPBASEB	WORD_REF(GRPBASEB_ADDR)
-#define GRPBASEC	WORD_REF(GRPBASEC_ADDR)
-#define GRPBASED	WORD_REF(GRPBASED_ADDR)
-
-#define GRPBASE_V	  0x0001	/* Valid */
-#define GRPBASE_GBA_MASK  0xfff0	/* Group Base Address (bits 31-20) */
-
-/*
- * Group Base Address Mask Registers 
- */
-#define GRPMASKA_ADDR	0xfffff108
-#define GRPMASKB_ADDR	0xfffff10a
-#define GRPMASKC_ADDR	0xfffff10c
-#define GRPMASKD_ADDR	0xfffff10e
-
-#define GRPMASKA	WORD_REF(GRPMASKA_ADDR)
-#define GRPMASKB	WORD_REF(GRPMASKB_ADDR)
-#define GRPMASKC	WORD_REF(GRPMASKC_ADDR)
-#define GRPMASKD	WORD_REF(GRPMASKD_ADDR)
-
-#define GRMMASK_GMA_MASK 0xfffff0	/* Group Base Mask (bits 31-20) */
-
-/*
- * Chip-Select Option Registers (group A)
- */
-#define CSA0_ADDR	0xfffff110
-#define CSA1_ADDR	0xfffff114
-#define CSA2_ADDR	0xfffff118
-#define CSA3_ADDR	0xfffff11c
-
-#define CSA0		LONG_REF(CSA0_ADDR)
-#define CSA1		LONG_REF(CSA1_ADDR)
-#define CSA2		LONG_REF(CSA2_ADDR)
-#define CSA3		LONG_REF(CSA3_ADDR)
-
-#define CSA_WAIT_MASK	0x00000007	/* Wait State Selection */
-#define CSA_WAIT_SHIFT	0
-#define CSA_RO		0x00000008	/* Read-Only */
-#define CSA_AM_MASK	0x0000ff00	/* Address Mask (bits 23-16) */
-#define CSA_AM_SHIFT	8
-#define CSA_BUSW	0x00010000	/* Bus Width Select */
-#define CSA_AC_MASK	0xff000000	/* Address Compare (bits 23-16) */
-#define CSA_AC_SHIFT	24
-
-/*
- * Chip-Select Option Registers (group B)
- */
-#define CSB0_ADDR	0xfffff120
-#define CSB1_ADDR	0xfffff124
-#define CSB2_ADDR	0xfffff128
-#define CSB3_ADDR	0xfffff12c
-
-#define CSB0		LONG_REF(CSB0_ADDR)
-#define CSB1		LONG_REF(CSB1_ADDR)
-#define CSB2		LONG_REF(CSB2_ADDR)
-#define CSB3		LONG_REF(CSB3_ADDR)
-
-#define CSB_WAIT_MASK	0x00000007	/* Wait State Selection */
-#define CSB_WAIT_SHIFT	0
-#define CSB_RO		0x00000008	/* Read-Only */
-#define CSB_AM_MASK	0x0000ff00	/* Address Mask (bits 23-16) */
-#define CSB_AM_SHIFT	8
-#define CSB_BUSW	0x00010000	/* Bus Width Select */
-#define CSB_AC_MASK	0xff000000	/* Address Compare (bits 23-16) */
-#define CSB_AC_SHIFT	24
-
-/*
- * Chip-Select Option Registers (group C)
- */
-#define CSC0_ADDR	0xfffff130
-#define CSC1_ADDR	0xfffff134
-#define CSC2_ADDR	0xfffff138
-#define CSC3_ADDR	0xfffff13c
-
-#define CSC0		LONG_REF(CSC0_ADDR)
-#define CSC1		LONG_REF(CSC1_ADDR)
-#define CSC2		LONG_REF(CSC2_ADDR)
-#define CSC3		LONG_REF(CSC3_ADDR)
-
-#define CSC_WAIT_MASK	0x00000007	/* Wait State Selection */
-#define CSC_WAIT_SHIFT	0
-#define CSC_RO		0x00000008	/* Read-Only */
-#define CSC_AM_MASK	0x0000fff0	/* Address Mask (bits 23-12) */
-#define CSC_AM_SHIFT	4
-#define CSC_BUSW	0x00010000	/* Bus Width Select */
-#define CSC_AC_MASK	0xfff00000	/* Address Compare (bits 23-12) */
-#define CSC_AC_SHIFT	20
-
-/*
- * Chip-Select Option Registers (group D)
- */
-#define CSD0_ADDR	0xfffff140
-#define CSD1_ADDR	0xfffff144
-#define CSD2_ADDR	0xfffff148
-#define CSD3_ADDR	0xfffff14c
-
-#define CSD0		LONG_REF(CSD0_ADDR)
-#define CSD1		LONG_REF(CSD1_ADDR)
-#define CSD2		LONG_REF(CSD2_ADDR)
-#define CSD3		LONG_REF(CSD3_ADDR)
-
-#define CSD_WAIT_MASK	0x00000007	/* Wait State Selection */
-#define CSD_WAIT_SHIFT	0
-#define CSD_RO		0x00000008	/* Read-Only */
-#define CSD_AM_MASK	0x0000fff0	/* Address Mask (bits 23-12) */
-#define CSD_AM_SHIFT	4
-#define CSD_BUSW	0x00010000	/* Bus Width Select */
-#define CSD_AC_MASK	0xfff00000	/* Address Compare (bits 23-12) */
-#define CSD_AC_SHIFT	20
-
-/**********
- *
- * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
- *
- **********/
- 
-/*
- * PLL Control Register 
- */
-#define PLLCR_ADDR	0xfffff200
-#define PLLCR		WORD_REF(PLLCR_ADDR)
-
-#define PLLCR_DISPLL	       0x0008	/* Disable PLL */
-#define PLLCR_CLKEN	       0x0010	/* Clock (CLKO pin) enable */
-#define PLLCR_SYSCLK_SEL_MASK  0x0700	/* System Clock Selection */
-#define PLLCR_SYSCLK_SEL_SHIFT 8
-#define PLLCR_PIXCLK_SEL_MASK  0x3800	/* LCD Clock Selection */
-#define PLLCR_PIXCLK_SEL_SHIFT 11
-
-/* 'EZ328-compatible definitions */
-#define PLLCR_LCDCLK_SEL_MASK	PLLCR_PIXCLK_SEL_MASK
-#define PLLCR_LCDCLK_SEL_SHIFT	PLLCR_PIXCLK_SEL_SHIFT
-
-/*
- * PLL Frequency Select Register
- */
-#define PLLFSR_ADDR	0xfffff202
-#define PLLFSR		WORD_REF(PLLFSR_ADDR)
-
-#define PLLFSR_PC_MASK	0x00ff		/* P Count */
-#define PLLFSR_PC_SHIFT 0
-#define PLLFSR_QC_MASK	0x0f00		/* Q Count */
-#define PLLFSR_QC_SHIFT 8
-#define PLLFSR_PROT	0x4000		/* Protect P & Q */
-#define PLLFSR_CLK32	0x8000		/* Clock 32 (kHz) */
-
-/*
- * Power Control Register
- */
-#define PCTRL_ADDR	0xfffff207
-#define PCTRL		BYTE_REF(PCTRL_ADDR)
-
-#define PCTRL_WIDTH_MASK	0x1f	/* CPU Clock bursts width */
-#define PCTRL_WIDTH_SHIFT	0
-#define PCTRL_STOP		0x40	/* Enter power-save mode immediately */ 
-#define PCTRL_PCEN		0x80	/* Power Control Enable */
-
-/**********
- *
- * 0xFFFFF3xx -- Interrupt Controller
- *
- **********/
-
-/* 
- * Interrupt Vector Register
- */
-#define IVR_ADDR	0xfffff300
-#define IVR		BYTE_REF(IVR_ADDR)
-
-#define IVR_VECTOR_MASK 0xF8
-
-/*
- * Interrupt control Register
- */
-#define ICR_ADRR	0xfffff302
-#define ICR		WORD_REF(ICR_ADDR)
-
-#define ICR_ET6		0x0100	/* Edge Trigger Select for IRQ6 */
-#define ICR_ET3		0x0200	/* Edge Trigger Select for IRQ3 */
-#define ICR_ET2		0x0400	/* Edge Trigger Select for IRQ2 */
-#define ICR_ET1		0x0800	/* Edge Trigger Select for IRQ1 */
-#define ICR_POL6	0x1000	/* Polarity Control for IRQ6 */
-#define ICR_POL3	0x2000	/* Polarity Control for IRQ3 */
-#define ICR_POL2	0x4000	/* Polarity Control for IRQ2 */
-#define ICR_POL1	0x8000	/* Polarity Control for IRQ1 */
-
-/*
- * Interrupt Mask Register
- */
-#define IMR_ADDR	0xfffff304
-#define IMR		LONG_REF(IMR_ADDR)
- 
-/*
- * Define the names for bit positions first. This is useful for
- * request_irq
- */
-#define SPIM_IRQ_NUM	0	/* SPI Master interrupt */
-#define	TMR2_IRQ_NUM	1	/* Timer 2 interrupt */
-#define UART_IRQ_NUM	2	/* UART interrupt */	
-#define	WDT_IRQ_NUM	3	/* Watchdog Timer interrupt */
-#define RTC_IRQ_NUM	4	/* RTC interrupt */
-#define	KB_IRQ_NUM	6	/* Keyboard Interrupt */
-#define PWM_IRQ_NUM	7	/* Pulse-Width Modulator int. */
-#define	INT0_IRQ_NUM	8	/* External INT0 */
-#define	INT1_IRQ_NUM	9	/* External INT1 */
-#define	INT2_IRQ_NUM	10	/* External INT2 */
-#define	INT3_IRQ_NUM	11	/* External INT3 */
-#define	INT4_IRQ_NUM	12	/* External INT4 */
-#define	INT5_IRQ_NUM	13	/* External INT5 */
-#define	INT6_IRQ_NUM	14	/* External INT6 */
-#define	INT7_IRQ_NUM	15	/* External INT7 */
-#define IRQ1_IRQ_NUM	16	/* IRQ1 */
-#define IRQ2_IRQ_NUM	17	/* IRQ2 */
-#define IRQ3_IRQ_NUM	18	/* IRQ3 */
-#define IRQ6_IRQ_NUM	19	/* IRQ6 */
-#define PEN_IRQ_NUM	20	/* Pen Interrupt */
-#define SPIS_IRQ_NUM	21	/* SPI Slave Interrupt */
-#define TMR1_IRQ_NUM	22	/* Timer 1 interrupt */
-#define IRQ7_IRQ_NUM	23	/* IRQ7 */
-
-/* '328-compatible definitions */
-#define SPI_IRQ_NUM	SPIM_IRQ_NUM
-#define TMR_IRQ_NUM	TMR1_IRQ_NUM
- 
-/*
- * Here go the bitmasks themselves
- */
-#define IMR_MSPIM 	(1 << SPIM _IRQ_NUM)	/* Mask SPI Master interrupt */
-#define	IMR_MTMR2	(1 << TMR2_IRQ_NUM)	/* Mask Timer 2 interrupt */
-#define IMR_MUART	(1 << UART_IRQ_NUM)	/* Mask UART interrupt */	
-#define	IMR_MWDT	(1 << WDT_IRQ_NUM)	/* Mask Watchdog Timer interrupt */
-#define IMR_MRTC	(1 << RTC_IRQ_NUM)	/* Mask RTC interrupt */
-#define	IMR_MKB		(1 << KB_IRQ_NUM)	/* Mask Keyboard Interrupt */
-#define IMR_MPWM	(1 << PWM_IRQ_NUM)	/* Mask Pulse-Width Modulator int. */
-#define	IMR_MINT0	(1 << INT0_IRQ_NUM)	/* Mask External INT0 */
-#define	IMR_MINT1	(1 << INT1_IRQ_NUM)	/* Mask External INT1 */
-#define	IMR_MINT2	(1 << INT2_IRQ_NUM)	/* Mask External INT2 */
-#define	IMR_MINT3	(1 << INT3_IRQ_NUM)	/* Mask External INT3 */
-#define	IMR_MINT4	(1 << INT4_IRQ_NUM)	/* Mask External INT4 */
-#define	IMR_MINT5	(1 << INT5_IRQ_NUM)	/* Mask External INT5 */
-#define	IMR_MINT6	(1 << INT6_IRQ_NUM)	/* Mask External INT6 */
-#define	IMR_MINT7	(1 << INT7_IRQ_NUM)	/* Mask External INT7 */
-#define IMR_MIRQ1	(1 << IRQ1_IRQ_NUM)	/* Mask IRQ1 */
-#define IMR_MIRQ2	(1 << IRQ2_IRQ_NUM)	/* Mask IRQ2 */
-#define IMR_MIRQ3	(1 << IRQ3_IRQ_NUM)	/* Mask IRQ3 */
-#define IMR_MIRQ6	(1 << IRQ6_IRQ_NUM)	/* Mask IRQ6 */
-#define IMR_MPEN	(1 << PEN_IRQ_NUM)	/* Mask Pen Interrupt */
-#define IMR_MSPIS	(1 << SPIS_IRQ_NUM)	/* Mask SPI Slave Interrupt */
-#define IMR_MTMR1	(1 << TMR1_IRQ_NUM)	/* Mask Timer 1 interrupt */
-#define IMR_MIRQ7	(1 << IRQ7_IRQ_NUM)	/* Mask IRQ7 */
-
-/* 'EZ328-compatible definitions */
-#define IMR_MSPI	IMR_MSPIM
-#define IMR_MTMR	IMR_MTMR1
-
-/* 
- * Interrupt Wake-Up Enable Register
- */
-#define IWR_ADDR	0xfffff308
-#define IWR		LONG_REF(IWR_ADDR)
-
-#define IWR_SPIM 	(1 << SPIM _IRQ_NUM)	/* SPI Master interrupt */
-#define	IWR_TMR2	(1 << TMR2_IRQ_NUM)	/* Timer 2 interrupt */
-#define IWR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
-#define	IWR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
-#define IWR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
-#define	IWR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
-#define IWR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator int. */
-#define	IWR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
-#define	IWR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
-#define	IWR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
-#define	IWR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
-#define	IWR_INT4	(1 << INT4_IRQ_NUM)	/* External INT4 */
-#define	IWR_INT5	(1 << INT5_IRQ_NUM)	/* External INT5 */
-#define	IWR_INT6	(1 << INT6_IRQ_NUM)	/* External INT6 */
-#define	IWR_INT7	(1 << INT7_IRQ_NUM)	/* External INT7 */
-#define IWR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
-#define IWR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
-#define IWR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
-#define IWR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
-#define IWR_PEN		(1 << PEN_IRQ_NUM)	/* Pen Interrupt */
-#define IWR_SPIS	(1 << SPIS_IRQ_NUM)	/* SPI Slave Interrupt */
-#define IWR_TMR1	(1 << TMR1_IRQ_NUM)	/* Timer 1 interrupt */
-#define IWR_IRQ7	(1 << IRQ7_IRQ_NUM)	/* IRQ7 */
-
-/* 
- * Interrupt Status Register 
- */
-#define ISR_ADDR	0xfffff30c
-#define ISR		LONG_REF(ISR_ADDR)
-
-#define ISR_SPIM 	(1 << SPIM _IRQ_NUM)	/* SPI Master interrupt */
-#define	ISR_TMR2	(1 << TMR2_IRQ_NUM)	/* Timer 2 interrupt */
-#define ISR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
-#define	ISR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
-#define ISR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
-#define	ISR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
-#define ISR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator int. */
-#define	ISR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
-#define	ISR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
-#define	ISR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
-#define	ISR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
-#define	ISR_INT4	(1 << INT4_IRQ_NUM)	/* External INT4 */
-#define	ISR_INT5	(1 << INT5_IRQ_NUM)	/* External INT5 */
-#define	ISR_INT6	(1 << INT6_IRQ_NUM)	/* External INT6 */
-#define	ISR_INT7	(1 << INT7_IRQ_NUM)	/* External INT7 */
-#define ISR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
-#define ISR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
-#define ISR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
-#define ISR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
-#define ISR_PEN		(1 << PEN_IRQ_NUM)	/* Pen Interrupt */
-#define ISR_SPIS	(1 << SPIS_IRQ_NUM)	/* SPI Slave Interrupt */
-#define ISR_TMR1	(1 << TMR1_IRQ_NUM)	/* Timer 1 interrupt */
-#define ISR_IRQ7	(1 << IRQ7_IRQ_NUM)	/* IRQ7 */
-
-/* 'EZ328-compatible definitions */
-#define ISR_SPI	ISR_SPIM
-#define ISR_TMR	ISR_TMR1
-
-/* 
- * Interrupt Pending Register 
- */
-#define IPR_ADDR	0xfffff310
-#define IPR		LONG_REF(IPR_ADDR)
-
-#define IPR_SPIM 	(1 << SPIM _IRQ_NUM)	/* SPI Master interrupt */
-#define	IPR_TMR2	(1 << TMR2_IRQ_NUM)	/* Timer 2 interrupt */
-#define IPR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
-#define	IPR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
-#define IPR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
-#define	IPR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
-#define IPR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator int. */
-#define	IPR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
-#define	IPR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
-#define	IPR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
-#define	IPR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
-#define	IPR_INT4	(1 << INT4_IRQ_NUM)	/* External INT4 */
-#define	IPR_INT5	(1 << INT5_IRQ_NUM)	/* External INT5 */
-#define	IPR_INT6	(1 << INT6_IRQ_NUM)	/* External INT6 */
-#define	IPR_INT7	(1 << INT7_IRQ_NUM)	/* External INT7 */
-#define IPR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
-#define IPR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
-#define IPR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
-#define IPR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
-#define IPR_PEN		(1 << PEN_IRQ_NUM)	/* Pen Interrupt */
-#define IPR_SPIS	(1 << SPIS_IRQ_NUM)	/* SPI Slave Interrupt */
-#define IPR_TMR1	(1 << TMR1_IRQ_NUM)	/* Timer 1 interrupt */
-#define IPR_IRQ7	(1 << IRQ7_IRQ_NUM)	/* IRQ7 */
-
-/* 'EZ328-compatible definitions */
-#define IPR_SPI	IPR_SPIM
-#define IPR_TMR	IPR_TMR1
-
-/**********
- *
- * 0xFFFFF4xx -- Parallel Ports
- *
- **********/
-
-/*
- * Port A
- */
-#define PADIR_ADDR	0xfffff400		/* Port A direction reg */
-#define PADATA_ADDR	0xfffff401		/* Port A data register */
-#define PASEL_ADDR	0xfffff403		/* Port A Select register */
-
-#define PADIR		BYTE_REF(PADIR_ADDR)
-#define PADATA		BYTE_REF(PADATA_ADDR)
-#define PASEL		BYTE_REF(PASEL_ADDR)
-
-#define PA(x)           (1 << (x))
-#define PA_A(x)		PA((x) - 16)	/* This is specific to PA only! */
-
-#define PA_A16		PA(0)		/* Use A16 as PA(0) */
-#define PA_A17		PA(1)		/* Use A17 as PA(1) */
-#define PA_A18		PA(2)		/* Use A18 as PA(2) */
-#define PA_A19		PA(3)		/* Use A19 as PA(3) */
-#define PA_A20		PA(4)		/* Use A20 as PA(4) */
-#define PA_A21		PA(5)		/* Use A21 as PA(5) */
-#define PA_A22		PA(6)		/* Use A22 as PA(6) */
-#define PA_A23		PA(7)		/* Use A23 as PA(7) */
-
-/* 
- * Port B
- */
-#define PBDIR_ADDR	0xfffff408		/* Port B direction reg */
-#define PBDATA_ADDR	0xfffff409		/* Port B data register */
-#define PBSEL_ADDR	0xfffff40b		/* Port B Select Register */
-
-#define PBDIR		BYTE_REF(PBDIR_ADDR)
-#define PBDATA		BYTE_REF(PBDATA_ADDR)
-#define PBSEL		BYTE_REF(PBSEL_ADDR)
-
-#define PB(x)           (1 << (x))
-#define PB_D(x)		PB(x)		/* This is specific to port B only */
-
-#define PB_D0		PB(0)		/* Use D0 as PB(0) */
-#define PB_D1		PB(1)		/* Use D1 as PB(1) */
-#define PB_D2		PB(2)		/* Use D2 as PB(2) */
-#define PB_D3		PB(3)		/* Use D3 as PB(3) */
-#define PB_D4		PB(4)		/* Use D4 as PB(4) */
-#define PB_D5		PB(5)		/* Use D5 as PB(5) */
-#define PB_D6		PB(6)		/* Use D6 as PB(6) */
-#define PB_D7		PB(7)		/* Use D7 as PB(7) */
-
-/* 
- * Port C
- */
-#define PCDIR_ADDR	0xfffff410		/* Port C direction reg */
-#define PCDATA_ADDR	0xfffff411		/* Port C data register */
-#define PCSEL_ADDR	0xfffff413		/* Port C Select Register */
-
-#define PCDIR		BYTE_REF(PCDIR_ADDR)
-#define PCDATA		BYTE_REF(PCDATA_ADDR)
-#define PCSEL		BYTE_REF(PCSEL_ADDR)
-
-#define PC(x)           (1 << (x))
-
-#define PC_WE		PC(6)		/* Use WE    as PC(6) */
-#define PC_DTACK	PC(5)		/* Use DTACK as PC(5) */
-#define PC_IRQ7		PC(4)		/* Use IRQ7  as PC(4) */
-#define PC_LDS		PC(2)		/* Use LDS   as PC(2) */
-#define PC_UDS		PC(1)		/* Use UDS   as PC(1) */
-#define PC_MOCLK	PC(0)		/* Use MOCLK as PC(0) */
-
-/* 
- * Port D
- */
-#define PDDIR_ADDR	0xfffff418		/* Port D direction reg */
-#define PDDATA_ADDR	0xfffff419		/* Port D data register */
-#define PDPUEN_ADDR	0xfffff41a		/* Port D Pull-Up enable reg */
-#define PDPOL_ADDR	0xfffff41c		/* Port D Polarity Register */
-#define PDIRQEN_ADDR	0xfffff41d		/* Port D IRQ enable register */
-#define	PDIQEG_ADDR	0xfffff41f		/* Port D IRQ Edge Register */
-
-#define PDDIR		BYTE_REF(PDDIR_ADDR)
-#define PDDATA		BYTE_REF(PDDATA_ADDR)
-#define PDPUEN		BYTE_REF(PDPUEN_ADDR)
-#define	PDPOL		BYTE_REF(PDPOL_ADDR)
-#define PDIRQEN		BYTE_REF(PDIRQEN_ADDR)
-#define PDIQEG		BYTE_REF(PDIQEG_ADDR)
-
-#define PD(x)           (1 << (x))
-#define PD_KB(x)	PD(x)		/* This is specific for Port D only */
-
-#define PD_KB0		PD(0)	/* Use KB0 as PD(0) */
-#define PD_KB1		PD(1)	/* Use KB1 as PD(1) */
-#define PD_KB2		PD(2)	/* Use KB2 as PD(2) */
-#define PD_KB3		PD(3)	/* Use KB3 as PD(3) */
-#define PD_KB4		PD(4)	/* Use KB4 as PD(4) */
-#define PD_KB5		PD(5)	/* Use KB5 as PD(5) */
-#define PD_KB6		PD(6)	/* Use KB6 as PD(6) */
-#define PD_KB7		PD(7)	/* Use KB7 as PD(7) */
-
-/* 
- * Port E
- */
-#define PEDIR_ADDR	0xfffff420		/* Port E direction reg */
-#define PEDATA_ADDR	0xfffff421		/* Port E data register */
-#define PEPUEN_ADDR	0xfffff422		/* Port E Pull-Up enable reg */
-#define PESEL_ADDR	0xfffff423		/* Port E Select Register */
-
-#define PEDIR		BYTE_REF(PEDIR_ADDR)
-#define PEDATA		BYTE_REF(PEDATA_ADDR)
-#define PEPUEN		BYTE_REF(PEPUEN_ADDR)
-#define PESEL		BYTE_REF(PESEL_ADDR)
-
-#define PE(x)           (1 << (x))
-
-#define PE_CSA1		PE(1)	/* Use CSA1 as PE(1) */
-#define PE_CSA2		PE(2)	/* Use CSA2 as PE(2) */
-#define PE_CSA3		PE(3)	/* Use CSA3 as PE(3) */
-#define PE_CSB0		PE(4)	/* Use CSB0 as PE(4) */
-#define PE_CSB1		PE(5)	/* Use CSB1 as PE(5) */
-#define PE_CSB2		PE(6)	/* Use CSB2 as PE(6) */
-#define PE_CSB3		PE(7)	/* Use CSB3 as PE(7) */
-
-/* 
- * Port F
- */
-#define PFDIR_ADDR	0xfffff428		/* Port F direction reg */
-#define PFDATA_ADDR	0xfffff429		/* Port F data register */
-#define PFPUEN_ADDR	0xfffff42a		/* Port F Pull-Up enable reg */
-#define PFSEL_ADDR	0xfffff42b		/* Port F Select Register */
-
-#define PFDIR		BYTE_REF(PFDIR_ADDR)
-#define PFDATA		BYTE_REF(PFDATA_ADDR)
-#define PFPUEN		BYTE_REF(PFPUEN_ADDR)
-#define PFSEL		BYTE_REF(PFSEL_ADDR)
-
-#define PF(x)           (1 << (x))
-#define PF_A(x)		PF((x) - 24)	/* This is Port F specific only */
-
-#define PF_A24		PF(0)	/* Use A24 as PF(0) */
-#define PF_A25		PF(1)	/* Use A25 as PF(1) */
-#define PF_A26		PF(2)	/* Use A26 as PF(2) */
-#define PF_A27		PF(3)	/* Use A27 as PF(3) */
-#define PF_A28		PF(4)	/* Use A28 as PF(4) */
-#define PF_A29		PF(5)	/* Use A29 as PF(5) */
-#define PF_A30		PF(6)	/* Use A30 as PF(6) */
-#define PF_A31		PF(7)	/* Use A31 as PF(7) */
-
-/* 
- * Port G
- */
-#define PGDIR_ADDR	0xfffff430		/* Port G direction reg */
-#define PGDATA_ADDR	0xfffff431		/* Port G data register */
-#define PGPUEN_ADDR	0xfffff432		/* Port G Pull-Up enable reg */
-#define PGSEL_ADDR	0xfffff433		/* Port G Select Register */
-
-#define PGDIR		BYTE_REF(PGDIR_ADDR)
-#define PGDATA		BYTE_REF(PGDATA_ADDR)
-#define PGPUEN		BYTE_REF(PGPUEN_ADDR)
-#define PGSEL		BYTE_REF(PGSEL_ADDR)
-
-#define PG(x)           (1 << (x))
-
-#define PG_UART_TXD	PG(0)	/* Use UART_TXD as PG(0) */
-#define PG_UART_RXD	PG(1)	/* Use UART_RXD as PG(1) */
-#define PG_PWMOUT	PG(2)	/* Use PWMOUT   as PG(2) */
-#define PG_TOUT2	PG(3)   /* Use TOUT2    as PG(3) */
-#define PG_TIN2		PG(4)	/* Use TIN2     as PG(4) */
-#define PG_TOUT1	PG(5)   /* Use TOUT1    as PG(5) */
-#define PG_TIN1		PG(6)	/* Use TIN1     as PG(6) */
-#define PG_RTCOUT	PG(7)	/* Use RTCOUT   as PG(7) */
-
-/* 
- * Port J
- */
-#define PJDIR_ADDR	0xfffff438		/* Port J direction reg */
-#define PJDATA_ADDR	0xfffff439		/* Port J data register */
-#define PJSEL_ADDR	0xfffff43b		/* Port J Select Register */
-
-#define PJDIR		BYTE_REF(PJDIR_ADDR)
-#define PJDATA		BYTE_REF(PJDATA_ADDR)
-#define PJSEL		BYTE_REF(PJSEL_ADDR)
-
-#define PJ(x)           (1 << (x)) 
-
-#define PJ_CSD3		PJ(7)	/* Use CSD3 as PJ(7) */
-
-/* 
- * Port K
- */
-#define PKDIR_ADDR	0xfffff440		/* Port K direction reg */
-#define PKDATA_ADDR	0xfffff441		/* Port K data register */
-#define PKPUEN_ADDR	0xfffff442		/* Port K Pull-Up enable reg */
-#define PKSEL_ADDR	0xfffff443		/* Port K Select Register */
-
-#define PKDIR		BYTE_REF(PKDIR_ADDR)
-#define PKDATA		BYTE_REF(PKDATA_ADDR)
-#define PKPUEN		BYTE_REF(PKPUEN_ADDR)
-#define PKSEL		BYTE_REF(PKSEL_ADDR)
-
-#define PK(x)           (1 << (x))
-
-/* 
- * Port M
- */
-#define PMDIR_ADDR	0xfffff438		/* Port M direction reg */
-#define PMDATA_ADDR	0xfffff439		/* Port M data register */
-#define PMPUEN_ADDR	0xfffff43a		/* Port M Pull-Up enable reg */
-#define PMSEL_ADDR	0xfffff43b		/* Port M Select Register */
-
-#define PMDIR		BYTE_REF(PMDIR_ADDR)
-#define PMDATA		BYTE_REF(PMDATA_ADDR)
-#define PMPUEN		BYTE_REF(PMPUEN_ADDR)
-#define PMSEL		BYTE_REF(PMSEL_ADDR)
-
-#define PM(x)           (1 << (x))
-
-/**********
- *
- * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
- *
- **********/
-
-/*
- * PWM Control Register 
- */
-#define PWMC_ADDR	0xfffff500
-#define PWMC		WORD_REF(PWMC_ADDR)
-
-#define PWMC_CLKSEL_MASK	0x0007	/* Clock Selection */
-#define PWMC_CLKSEL_SHIFT	0
-#define PWMC_PWMEN		0x0010	/* Enable PWM */
-#define PMNC_POL		0x0020	/* PWM Output Bit Polarity */
-#define PWMC_PIN		0x0080	/* Current PWM output pin status */
-#define PWMC_LOAD		0x0100	/* Force a new period */
-#define PWMC_IRQEN		0x4000	/* Interrupt Request Enable */
-#define PWMC_CLKSRC		0x8000	/* Clock Source Select */
-
-/* 'EZ328-compatible definitions */
-#define PWMC_EN	PWMC_PWMEN
-
-/*
- * PWM Period Register
- */
-#define PWMP_ADDR	0xfffff502
-#define PWMP		WORD_REF(PWMP_ADDR)
-
-/* 
- * PWM Width Register 
- */
-#define PWMW_ADDR	0xfffff504
-#define PWMW		WORD_REF(PWMW_ADDR)
-
-/*
- * PWM Counter Register
- */
-#define PWMCNT_ADDR	0xfffff506
-#define PWMCNT		WORD_REF(PWMCNT_ADDR)
-
-/**********
- *
- * 0xFFFFF6xx -- General-Purpose Timers
- *
- **********/
-
-/* 
- * Timer Unit 1 and 2 Control Registers
- */
-#define TCTL1_ADDR	0xfffff600
-#define TCTL1		WORD_REF(TCTL1_ADDR)
-#define TCTL2_ADDR	0xfffff60c
-#define TCTL2		WORD_REF(TCTL2_ADDR)
-
-#define	TCTL_TEN		0x0001	/* Timer Enable  */
-#define TCTL_CLKSOURCE_MASK 	0x000e	/* Clock Source: */
-#define   TCTL_CLKSOURCE_STOP	   0x0000	/* Stop count (disabled)    */
-#define   TCTL_CLKSOURCE_SYSCLK	   0x0002	/* SYSCLK to prescaler      */
-#define   TCTL_CLKSOURCE_SYSCLK_16 0x0004	/* SYSCLK/16 to prescaler   */
-#define   TCTL_CLKSOURCE_TIN	   0x0006	/* TIN to prescaler         */
-#define   TCTL_CLKSOURCE_32KHZ	   0x0008	/* 32kHz clock to prescaler */
-#define TCTL_IRQEN		0x0010	/* IRQ Enable    */
-#define TCTL_OM			0x0020	/* Output Mode   */
-#define TCTL_CAP_MASK		0x00c0	/* Capture Edge: */
-#define	  TCTL_CAP_RE		0x0040		/* Capture on rizing edge   */
-#define   TCTL_CAP_FE		0x0080		/* Capture on falling edge  */
-#define TCTL_FRR		0x0010	/* Free-Run Mode */
-
-/* 'EZ328-compatible definitions */
-#define TCTL_ADDR	TCTL1_ADDR
-#define TCTL		TCTL1
-
-/*
- * Timer Unit 1 and 2 Prescaler Registers
- */
-#define TPRER1_ADDR	0xfffff602
-#define TPRER1		WORD_REF(TPRER1_ADDR)
-#define TPRER2_ADDR	0xfffff60e
-#define TPRER2		WORD_REF(TPRER2_ADDR)
-
-/* 'EZ328-compatible definitions */
-#define TPRER_ADDR	TPRER1_ADDR
-#define TPRER		TPRER1
-
-/*
- * Timer Unit 1 and 2 Compare Registers
- */
-#define TCMP1_ADDR	0xfffff604
-#define TCMP1		WORD_REF(TCMP1_ADDR)
-#define TCMP2_ADDR	0xfffff610
-#define TCMP2		WORD_REF(TCMP2_ADDR)
-
-/* 'EZ328-compatible definitions */
-#define TCMP_ADDR	TCMP1_ADDR
-#define TCMP		TCMP1
-
-/*
- * Timer Unit 1 and 2 Capture Registers
- */
-#define TCR1_ADDR	0xfffff606
-#define TCR1		WORD_REF(TCR1_ADDR)
-#define TCR2_ADDR	0xfffff612
-#define TCR2		WORD_REF(TCR2_ADDR)
-
-/* 'EZ328-compatible definitions */
-#define TCR_ADDR	TCR1_ADDR
-#define TCR		TCR1
-
-/*
- * Timer Unit 1 and 2 Counter Registers
- */
-#define TCN1_ADDR	0xfffff608
-#define TCN1		WORD_REF(TCN1_ADDR)
-#define TCN2_ADDR	0xfffff614
-#define TCN2		WORD_REF(TCN2_ADDR)
-
-/* 'EZ328-compatible definitions */
-#define TCN_ADDR	TCN1_ADDR
-#define TCN		TCN
-
-/*
- * Timer Unit 1 and 2 Status Registers
- */
-#define TSTAT1_ADDR	0xfffff60a
-#define TSTAT1		WORD_REF(TSTAT1_ADDR)
-#define TSTAT2_ADDR	0xfffff616
-#define TSTAT2		WORD_REF(TSTAT2_ADDR)
-
-#define TSTAT_COMP	0x0001		/* Compare Event occurred */
-#define TSTAT_CAPT	0x0001		/* Capture Event occurred */
-
-/* 'EZ328-compatible definitions */
-#define TSTAT_ADDR	TSTAT1_ADDR
-#define TSTAT		TSTAT1
-
-/*
- * Watchdog Compare Register 
- */
-#define WRR_ADDR	0xfffff61a
-#define WRR		WORD_REF(WRR_ADDR)
-
-/*
- * Watchdog Counter Register 
- */
-#define WCN_ADDR	0xfffff61c
-#define WCN		WORD_REF(WCN_ADDR)
-
-/*
- * Watchdog Control and Status Register
- */
-#define WCSR_ADDR	0xfffff618
-#define WCSR		WORD_REF(WCSR_ADDR)
-
-#define WCSR_WDEN	0x0001	/* Watchdog Enable */
-#define WCSR_FI		0x0002	/* Forced Interrupt (instead of SW reset)*/
-#define WCSR_WRST	0x0004	/* Watchdog Reset */
-
-/**********
- *
- * 0xFFFFF7xx -- Serial Periferial Interface Slave (SPIS)
- *
- **********/
-
-/*
- * SPI Slave Register
- */
-#define SPISR_ADDR	0xfffff700
-#define SPISR		WORD_REF(SPISR_ADDR)
-
-#define SPISR_DATA_ADDR	0xfffff701
-#define SPISR_DATA	BYTE_REF(SPISR_DATA_ADDR)
-
-#define SPISR_DATA_MASK	 0x00ff	/* Shifted data from the external device */
-#define SPISR_DATA_SHIFT 0
-#define SPISR_SPISEN	 0x0100	/* SPIS module enable */
-#define SPISR_POL	 0x0200	/* SPSCLK polarity control */
-#define SPISR_PHA	 0x0400	/* Phase relationship between SPSCLK & SPSRxD */
-#define SPISR_OVWR	 0x0800	/* Data buffer has been overwritten */
-#define SPISR_DATARDY	 0x1000	/* Data ready */
-#define SPISR_ENPOL	 0x2000	/* Enable Polarity */
-#define SPISR_IRQEN	 0x4000	/* SPIS IRQ Enable */
-#define SPISR_SPISIRQ	 0x8000	/* SPIS IRQ posted */
-
-/**********
- *
- * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
- *
- **********/
-
-/*
- * SPIM Data Register
- */
-#define SPIMDATA_ADDR	0xfffff800
-#define SPIMDATA	WORD_REF(SPIMDATA_ADDR)
-
-/*
- * SPIM Control/Status Register
- */
-#define SPIMCONT_ADDR	0xfffff802
-#define SPIMCONT	WORD_REF(SPIMCONT_ADDR)
-
-#define SPIMCONT_BIT_COUNT_MASK	 0x000f	/* Transfer Length in Bytes */
-#define SPIMCONT_BIT_COUNT_SHIFT 0
-#define SPIMCONT_POL		 0x0010	/* SPMCLK Signel Polarity */
-#define	SPIMCONT_PHA		 0x0020	/* Clock/Data phase relationship */
-#define SPIMCONT_IRQEN		 0x0040 /* IRQ Enable */
-#define SPIMCONT_SPIMIRQ	 0x0080	/* Interrupt Request */
-#define SPIMCONT_XCH		 0x0100	/* Exchange */
-#define SPIMCONT_RSPIMEN	 0x0200	/* Enable SPIM */
-#define SPIMCONT_DATA_RATE_MASK	 0xe000	/* SPIM Data Rate */
-#define SPIMCONT_DATA_RATE_SHIFT 13
-
-/* 'EZ328-compatible definitions */
-#define SPIMCONT_IRQ	SPIMCONT_SPIMIRQ
-#define SPIMCONT_ENABLE	SPIMCONT_SPIMEN
-/**********
- *
- * 0xFFFFF9xx -- UART
- *
- **********/
-
-/*
- * UART Status/Control Register
- */
-#define USTCNT_ADDR	0xfffff900
-#define USTCNT		WORD_REF(USTCNT_ADDR)
-
-#define USTCNT_TXAVAILEN	0x0001	/* Transmitter Available Int Enable */
-#define USTCNT_TXHALFEN		0x0002	/* Transmitter Half Empty Int Enable */
-#define USTCNT_TXEMPTYEN	0x0004	/* Transmitter Empty Int Enable */
-#define USTCNT_RXREADYEN	0x0008	/* Receiver Ready Interrupt Enable */
-#define USTCNT_RXHALFEN		0x0010	/* Receiver Half-Full Int Enable */
-#define USTCNT_RXFULLEN		0x0020	/* Receiver Full Interrupt Enable */
-#define USTCNT_CTSDELTAEN	0x0040	/* CTS Delta Interrupt Enable */
-#define USTCNT_GPIODELTAEN	0x0080	/* Old Data Interrupt Enable */
-#define USTCNT_8_7		0x0100	/* Eight or seven-bit transmission */
-#define USTCNT_STOP		0x0200	/* Stop bit transmission */
-#define USTCNT_ODD_EVEN		0x0400	/* Odd Parity */
-#define	USTCNT_PARITYEN		0x0800	/* Parity Enable */
-#define USTCNT_CLKMODE		0x1000	/* Clock Mode Select */
-#define	USTCNT_TXEN		0x2000	/* Transmitter Enable */
-#define USTCNT_RXEN		0x4000	/* Receiver Enable */
-#define USTCNT_UARTEN		0x8000	/* UART Enable */
-
-/* 'EZ328-compatible definitions */
-#define USTCNT_TXAE	USTCNT_TXAVAILEN 
-#define USTCNT_TXHE	USTCNT_TXHALFEN
-#define USTCNT_TXEE	USTCNT_TXEMPTYEN
-#define USTCNT_RXRE	USTCNT_RXREADYEN
-#define USTCNT_RXHE	USTCNT_RXHALFEN
-#define USTCNT_RXFE	USTCNT_RXFULLEN
-#define USTCNT_CTSD	USTCNT_CTSDELTAEN
-#define USTCNT_ODD	USTCNT_ODD_EVEN
-#define USTCNT_PEN	USTCNT_PARITYEN
-#define USTCNT_CLKM	USTCNT_CLKMODE
-#define USTCNT_UEN	USTCNT_UARTEN
-
-/*
- * UART Baud Control Register
- */
-#define UBAUD_ADDR	0xfffff902
-#define UBAUD		WORD_REF(UBAUD_ADDR)
-
-#define UBAUD_PRESCALER_MASK	0x003f	/* Actual divisor is 65 - PRESCALER */
-#define UBAUD_PRESCALER_SHIFT	0
-#define UBAUD_DIVIDE_MASK	0x0700	/* Baud Rate freq. divizor */
-#define UBAUD_DIVIDE_SHIFT	8
-#define UBAUD_BAUD_SRC		0x0800	/* Baud Rate Source */
-#define UBAUD_GPIOSRC		0x1000	/* GPIO source */
-#define UBAUD_GPIODIR		0x2000	/* GPIO Direction */
-#define UBAUD_GPIO		0x4000	/* Current GPIO pin status */
-#define UBAUD_GPIODELTA		0x8000	/* GPIO pin value changed */
-
-/*
- * UART Receiver Register 
- */
-#define URX_ADDR	0xfffff904
-#define URX		WORD_REF(URX_ADDR)
-
-#define URX_RXDATA_ADDR	0xfffff905
-#define URX_RXDATA	BYTE_REF(URX_RXDATA_ADDR)
-
-#define URX_RXDATA_MASK	 0x00ff	/* Received data */
-#define URX_RXDATA_SHIFT 0
-#define URX_PARITY_ERROR 0x0100	/* Parity Error */
-#define URX_BREAK	 0x0200	/* Break Detected */
-#define URX_FRAME_ERROR	 0x0400	/* Framing Error */
-#define URX_OVRUN	 0x0800	/* Serial Overrun */
-#define URX_DATA_READY	 0x2000	/* Data Ready (FIFO not empty) */
-#define URX_FIFO_HALF	 0x4000 /* FIFO is Half-Full */
-#define URX_FIFO_FULL	 0x8000	/* FIFO is Full */
-
-/*
- * UART Transmitter Register 
- */
-#define UTX_ADDR	0xfffff906
-#define UTX		WORD_REF(UTX_ADDR)
-
-#define UTX_TXDATA_ADDR	0xfffff907
-#define UTX_TXDATA	BYTE_REF(UTX_TXDATA_ADDR)
-
-#define UTX_TXDATA_MASK	 0x00ff	/* Data to be transmitted */
-#define UTX_TXDATA_SHIFT 0
-#define UTX_CTS_DELTA	 0x0100	/* CTS changed */
-#define UTX_CTS_STATUS	 0x0200	/* CTS State */
-#define	UTX_IGNORE_CTS	 0x0800	/* Ignore CTS */
-#define UTX_SEND_BREAK	 0x1000	/* Send a BREAK */
-#define UTX_TX_AVAIL	 0x2000	/* Transmit FIFO has a slot available */
-#define UTX_FIFO_HALF	 0x4000	/* Transmit FIFO is half empty */
-#define UTX_FIFO_EMPTY	 0x8000	/* Transmit FIFO is empty */
-
-/* 'EZ328-compatible definitions */
-#define UTX_CTS_STAT	UTX_CTS_STATUS
-#define UTX_NOCTS	UTX_IGNORE_CTS
-
-/*
- * UART Miscellaneous Register 
- */
-#define UMISC_ADDR	0xfffff908
-#define UMISC		WORD_REF(UMISC_ADDR)
-
-#define UMISC_TX_POL	 0x0004	/* Transmit Polarity */
-#define UMISC_RX_POL	 0x0008	/* Receive Polarity */
-#define UMISC_IRDA_LOOP	 0x0010	/* IrDA Loopback Enable */
-#define UMISC_IRDA_EN	 0x0020	/* Infra-Red Enable */
-#define UMISC_RTS	 0x0040	/* Set RTS status */
-#define UMISC_RTSCONT	 0x0080	/* Choose RTS control */
-#define UMISC_LOOP	 0x1000	/* Serial Loopback Enable */
-#define UMISC_FORCE_PERR 0x2000	/* Force Parity Error */
-#define UMISC_CLKSRC	 0x4000	/* Clock Source */
-
-
-/* generalization of uart control registers to support multiple ports: */
-typedef volatile struct {
-  volatile unsigned short int ustcnt;
-  volatile unsigned short int ubaud;
-  union {
-    volatile unsigned short int w;
-    struct {
-      volatile unsigned char status;
-      volatile unsigned char rxdata;
-    } b;
-  } urx;
-  union {
-    volatile unsigned short int w;
-    struct {
-      volatile unsigned char status;
-      volatile unsigned char txdata;
-    } b;
-  } utx;
-  volatile unsigned short int umisc;
-  volatile unsigned short int pad1;
-  volatile unsigned short int pad2;
-  volatile unsigned short int pad3;
-} __attribute__((packed)) m68328_uart;
-
-
-/**********
- *
- * 0xFFFFFAxx -- LCD Controller
- *
- **********/
-
-/*
- * LCD Screen Starting Address Register 
- */
-#define LSSA_ADDR	0xfffffa00
-#define LSSA		LONG_REF(LSSA_ADDR)
-
-#define LSSA_SSA_MASK	0xfffffffe	/* Bit 0 is reserved */
-
-/*
- * LCD Virtual Page Width Register 
- */
-#define LVPW_ADDR	0xfffffa05
-#define LVPW		BYTE_REF(LVPW_ADDR)
-
-/*
- * LCD Screen Width Register (not compatible with 'EZ328 !!!)
- */
-#define LXMAX_ADDR	0xfffffa08
-#define LXMAX		WORD_REF(LXMAX_ADDR)
-
-#define LXMAX_XM_MASK	0x02ff		/* Bits 0-3 are reserved */
-
-/*
- * LCD Screen Height Register
- */
-#define LYMAX_ADDR	0xfffffa0a
-#define LYMAX		WORD_REF(LYMAX_ADDR)
-
-#define LYMAX_YM_MASK	0x02ff		/* Bits 10-15 are reserved */
-
-/*
- * LCD Cursor X Position Register
- */
-#define LCXP_ADDR	0xfffffa18
-#define LCXP		WORD_REF(LCXP_ADDR)
-
-#define LCXP_CC_MASK	0xc000		/* Cursor Control */
-#define   LCXP_CC_TRAMSPARENT	0x0000
-#define   LCXP_CC_BLACK		0x4000
-#define   LCXP_CC_REVERSED	0x8000
-#define   LCXP_CC_WHITE		0xc000
-#define LCXP_CXP_MASK	0x02ff		/* Cursor X position */
-
-/*
- * LCD Cursor Y Position Register
- */
-#define LCYP_ADDR	0xfffffa1a
-#define LCYP		WORD_REF(LCYP_ADDR)
-
-#define LCYP_CYP_MASK	0x01ff		/* Cursor Y Position */
-
-/*
- * LCD Cursor Width and Heigth Register
- */
-#define LCWCH_ADDR	0xfffffa1c
-#define LCWCH		WORD_REF(LCWCH_ADDR)
-
-#define LCWCH_CH_MASK	0x001f		/* Cursor Height */
-#define LCWCH_CH_SHIFT	0
-#define LCWCH_CW_MASK	0x1f00		/* Cursor Width */
-#define LCWCH_CW_SHIFT	8
-
-/*
- * LCD Blink Control Register
- */
-#define LBLKC_ADDR	0xfffffa1f
-#define LBLKC		BYTE_REF(LBLKC_ADDR)
-
-#define LBLKC_BD_MASK	0x7f	/* Blink Divisor */
-#define LBLKC_BD_SHIFT	0
-#define LBLKC_BKEN	0x80	/* Blink Enabled */
-
-/*
- * LCD Panel Interface Configuration Register 
- */
-#define LPICF_ADDR	0xfffffa20
-#define LPICF		BYTE_REF(LPICF_ADDR)
-
-#define LPICF_GS_MASK	 0x01	 /* Gray-Scale Mode */
-#define	  LPICF_GS_BW	   0x00
-#define   LPICF_GS_GRAY_4  0x01
-#define LPICF_PBSIZ_MASK 0x06	/* Panel Bus Width */
-#define   LPICF_PBSIZ_1	   0x00
-#define   LPICF_PBSIZ_2    0x02
-#define   LPICF_PBSIZ_4    0x04
-
-/*
- * LCD Polarity Configuration Register 
- */
-#define LPOLCF_ADDR	0xfffffa21
-#define LPOLCF		BYTE_REF(LPOLCF_ADDR)
-
-#define LPOLCF_PIXPOL	0x01	/* Pixel Polarity */
-#define LPOLCF_LPPOL	0x02	/* Line Pulse Polarity */
-#define LPOLCF_FLMPOL	0x04	/* Frame Marker Polarity */
-#define LPOLCF_LCKPOL	0x08	/* LCD Shift Lock Polarity */
-
-/*
- * LACD (LCD Alternate Crystal Direction) Rate Control Register
- */
-#define LACDRC_ADDR	0xfffffa23
-#define LACDRC		BYTE_REF(LACDRC_ADDR)
-
-#define LACDRC_ACD_MASK	 0x0f	/* Alternate Crystal Direction Control */
-#define LACDRC_ACD_SHIFT 0
-
-/*
- * LCD Pixel Clock Divider Register
- */
-#define LPXCD_ADDR	0xfffffa25
-#define LPXCD		BYTE_REF(LPXCD_ADDR)
-
-#define	LPXCD_PCD_MASK	0x3f 	/* Pixel Clock Divider */
-#define LPXCD_PCD_SHIFT	0
-
-/*
- * LCD Clocking Control Register
- */
-#define LCKCON_ADDR	0xfffffa27
-#define LCKCON		BYTE_REF(LCKCON_ADDR)
-
-#define LCKCON_PCDS	 0x01	/* Pixel Clock Divider Source Select */
-#define LCKCON_DWIDTH	 0x02	/* Display Memory Width  */
-#define LCKCON_DWS_MASK	 0x3c	/* Display Wait-State */
-#define LCKCON_DWS_SHIFT 2
-#define LCKCON_DMA16	 0x40	/* DMA burst length */
-#define LCKCON_LCDON	 0x80	/* Enable LCD Controller */
-
-/* 'EZ328-compatible definitions */
-#define LCKCON_DW_MASK	LCKCON_DWS_MASK
-#define LCKCON_DW_SHIFT	LCKCON_DWS_SHIFT
-
-/*
- * LCD Last Buffer Address Register
- */
-#define LLBAR_ADDR	0xfffffa29
-#define LLBAR		BYTE_REF(LLBAR_ADDR)
-
-#define LLBAR_LBAR_MASK	 0x7f	/* Number of memory words to fill 1 line */
-#define LLBAR_LBAR_SHIFT 0
-
-/*
- * LCD Octet Terminal Count Register 
- */
-#define LOTCR_ADDR	0xfffffa2b
-#define LOTCR		BYTE_REF(LOTCR_ADDR)
-
-/*
- * LCD Panning Offset Register
- */
-#define LPOSR_ADDR	0xfffffa2d
-#define LPOSR		BYTE_REF(LPOSR_ADDR)
-
-#define LPOSR_BOS	0x08	/* Byte offset (for B/W mode only */
-#define LPOSR_POS_MASK	0x07	/* Pixel Offset Code */
-#define LPOSR_POS_SHIFT	0
-
-/*
- * LCD Frame Rate Control Modulation Register
- */
-#define LFRCM_ADDR	0xfffffa31
-#define LFRCM		BYTE_REF(LFRCM_ADDR)
-
-#define LFRCM_YMOD_MASK	 0x0f	/* Vertical Modulation */
-#define LFRCM_YMOD_SHIFT 0
-#define LFRCM_XMOD_MASK	 0xf0	/* Horizontal Modulation */
-#define LFRCM_XMOD_SHIFT 4
-
-/*
- * LCD Gray Palette Mapping Register
- */
-#define LGPMR_ADDR	0xfffffa32
-#define LGPMR		WORD_REF(LGPMR_ADDR)
-
-#define LGPMR_GLEVEL3_MASK	0x000f
-#define LGPMR_GLEVEL3_SHIFT	0 
-#define LGPMR_GLEVEL2_MASK	0x00f0
-#define LGPMR_GLEVEL2_SHIFT	4 
-#define LGPMR_GLEVEL0_MASK	0x0f00
-#define LGPMR_GLEVEL0_SHIFT	8 
-#define LGPMR_GLEVEL1_MASK	0xf000
-#define LGPMR_GLEVEL1_SHIFT	12
-
-/**********
- *
- * 0xFFFFFBxx -- Real-Time Clock (RTC)
- *
- **********/
-
-/*
- * RTC Hours Minutes and Seconds Register
- */
-#define RTCTIME_ADDR	0xfffffb00
-#define RTCTIME		LONG_REF(RTCTIME_ADDR)
-
-#define RTCTIME_SECONDS_MASK	0x0000003f	/* Seconds */
-#define RTCTIME_SECONDS_SHIFT	0
-#define RTCTIME_MINUTES_MASK	0x003f0000	/* Minutes */
-#define RTCTIME_MINUTES_SHIFT	16
-#define RTCTIME_HOURS_MASK	0x1f000000	/* Hours */
-#define RTCTIME_HOURS_SHIFT	24
-
-/*
- *  RTC Alarm Register 
- */
-#define RTCALRM_ADDR    0xfffffb04
-#define RTCALRM         LONG_REF(RTCALRM_ADDR)
-
-#define RTCALRM_SECONDS_MASK    0x0000003f      /* Seconds */
-#define RTCALRM_SECONDS_SHIFT   0
-#define RTCALRM_MINUTES_MASK    0x003f0000      /* Minutes */
-#define RTCALRM_MINUTES_SHIFT   16
-#define RTCALRM_HOURS_MASK      0x1f000000      /* Hours */
-#define RTCALRM_HOURS_SHIFT     24
-
-/*
- * RTC Control Register
- */
-#define RTCCTL_ADDR	0xfffffb0c
-#define RTCCTL		WORD_REF(RTCCTL_ADDR)
-
-#define RTCCTL_384	0x0020	/* Crystal Selection */
-#define RTCCTL_ENABLE	0x0080	/* RTC Enable */
-
-/* 'EZ328-compatible definitions */
-#define RTCCTL_XTL	RTCCTL_384
-#define RTCCTL_EN	RTCCTL_ENABLE
-
-/*
- * RTC Interrupt Status Register 
- */
-#define RTCISR_ADDR	0xfffffb0e
-#define RTCISR		WORD_REF(RTCISR_ADDR)
-
-#define RTCISR_SW	0x0001	/* Stopwatch timed out */
-#define RTCISR_MIN	0x0002	/* 1-minute interrupt has occurred */
-#define RTCISR_ALM	0x0004	/* Alarm interrupt has occurred */
-#define RTCISR_DAY	0x0008	/* 24-hour rollover interrupt has occurred */
-#define RTCISR_1HZ	0x0010	/* 1Hz interrupt has occurred */
-
-/*
- * RTC Interrupt Enable Register
- */
-#define RTCIENR_ADDR	0xfffffb10
-#define RTCIENR		WORD_REF(RTCIENR_ADDR)
-
-#define RTCIENR_SW	0x0001	/* Stopwatch interrupt enable */
-#define RTCIENR_MIN	0x0002	/* 1-minute interrupt enable */
-#define RTCIENR_ALM	0x0004	/* Alarm interrupt enable */
-#define RTCIENR_DAY	0x0008	/* 24-hour rollover interrupt enable */
-#define RTCIENR_1HZ	0x0010	/* 1Hz interrupt enable */
-
-/* 
- * Stopwatch Minutes Register
- */
-#define STPWCH_ADDR	0xfffffb12
-#define STPWCH		WORD_REF(STPWCH)
-
-#define STPWCH_CNT_MASK	 0x00ff	/* Stopwatch countdown value */
-#define SPTWCH_CNT_SHIFT 0
-
-#endif /* _MC68328_H_ */
diff --git a/arch/m68knommu/include/asm/MC68332.h b/arch/m68knommu/include/asm/MC68332.h
deleted file mode 100644
index 6bb8f02685a2..000000000000
--- a/arch/m68knommu/include/asm/MC68332.h
+++ /dev/null
@@ -1,152 +0,0 @@
-
-/* include/asm-m68knommu/MC68332.h: '332 control registers
- *
- * Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
- *
- */
-
-#ifndef _MC68332_H_
-#define _MC68332_H_
-
-#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
-#define WORD_REF(addr) (*((volatile unsigned short*)addr))
-
-#define PORTE_ADDR	0xfffa11
-#define PORTE	BYTE_REF(PORTE_ADDR)
-#define DDRE_ADDR	0xfffa15
-#define DDRE	BYTE_REF(DDRE_ADDR)
-#define PEPAR_ADDR	0xfffa17
-#define PEPAR	BYTE_REF(PEPAR_ADDR)
-
-#define PORTF_ADDR	0xfffa19
-#define PORTF	BYTE_REF(PORTF_ADDR)
-#define DDRF_ADDR	0xfffa1d
-#define DDRF	BYTE_REF(DDRF_ADDR)
-#define PFPAR_ADDR	0xfffa1f
-#define PFPAR	BYTE_REF(PFPAR_ADDR)
-
-#define PORTQS_ADDR	0xfffc15
-#define PORTQS	BYTE_REF(PORTQS_ADDR)
-#define DDRQS_ADDR	0xfffc17
-#define DDRQS	BYTE_REF(DDRQS_ADDR)
-#define PQSPAR_ADDR	0xfffc16
-#define PQSPAR	BYTE_REF(PQSPAR_ADDR)
-
-#define CSPAR0_ADDR 0xFFFA44
-#define CSPAR0 WORD_REF(CSPAR0_ADDR)
-#define CSPAR1_ADDR 0xFFFA46
-#define CSPAR1 WORD_REF(CSPAR1_ADDR)
-#define CSARBT_ADDR 0xFFFA48
-#define CSARBT WORD_REF(CSARBT_ADDR)
-#define CSOPBT_ADDR 0xFFFA4A
-#define CSOPBT WORD_REF(CSOPBT_ADDR)
-#define CSBAR0_ADDR 0xFFFA4C
-#define CSBAR0 WORD_REF(CSBAR0_ADDR)
-#define CSOR0_ADDR 0xFFFA4E
-#define CSOR0 WORD_REF(CSOR0_ADDR)
-#define CSBAR1_ADDR 0xFFFA50
-#define CSBAR1 WORD_REF(CSBAR1_ADDR)
-#define CSOR1_ADDR 0xFFFA52
-#define CSOR1 WORD_REF(CSOR1_ADDR)
-#define CSBAR2_ADDR 0xFFFA54
-#define CSBAR2 WORD_REF(CSBAR2_ADDR)
-#define CSOR2_ADDR 0xFFFA56
-#define CSOR2 WORD_REF(CSOR2_ADDR)
-#define CSBAR3_ADDR 0xFFFA58
-#define CSBAR3 WORD_REF(CSBAR3_ADDR)
-#define CSOR3_ADDR 0xFFFA5A
-#define CSOR3 WORD_REF(CSOR3_ADDR)
-#define CSBAR4_ADDR 0xFFFA5C
-#define CSBAR4 WORD_REF(CSBAR4_ADDR)
-#define CSOR4_ADDR 0xFFFA5E
-#define CSOR4 WORD_REF(CSOR4_ADDR)
-#define CSBAR5_ADDR 0xFFFA60
-#define CSBAR5 WORD_REF(CSBAR5_ADDR)
-#define CSOR5_ADDR 0xFFFA62
-#define CSOR5 WORD_REF(CSOR5_ADDR)
-#define CSBAR6_ADDR 0xFFFA64
-#define CSBAR6 WORD_REF(CSBAR6_ADDR)
-#define CSOR6_ADDR 0xFFFA66
-#define CSOR6 WORD_REF(CSOR6_ADDR)
-#define CSBAR7_ADDR 0xFFFA68
-#define CSBAR7 WORD_REF(CSBAR7_ADDR)
-#define CSOR7_ADDR 0xFFFA6A
-#define CSOR7 WORD_REF(CSOR7_ADDR)
-#define CSBAR8_ADDR 0xFFFA6C
-#define CSBAR8 WORD_REF(CSBAR8_ADDR)
-#define CSOR8_ADDR 0xFFFA6E
-#define CSOR8 WORD_REF(CSOR8_ADDR)
-#define CSBAR9_ADDR 0xFFFA70
-#define CSBAR9 WORD_REF(CSBAR9_ADDR)
-#define CSOR9_ADDR 0xFFFA72
-#define CSOR9 WORD_REF(CSOR9_ADDR)
-#define CSBAR10_ADDR 0xFFFA74
-#define CSBAR10 WORD_REF(CSBAR10_ADDR)
-#define CSOR10_ADDR 0xFFFA76
-#define CSOR10 WORD_REF(CSOR10_ADDR)
-
-#define CSOR_MODE_ASYNC	0x0000
-#define CSOR_MODE_SYNC	0x8000
-#define CSOR_MODE_MASK	0x8000
-#define CSOR_BYTE_DISABLE	0x0000
-#define CSOR_BYTE_UPPER		0x4000
-#define CSOR_BYTE_LOWER		0x2000
-#define CSOR_BYTE_BOTH		0x6000
-#define CSOR_BYTE_MASK		0x6000
-#define CSOR_RW_RSVD		0x0000
-#define CSOR_RW_READ		0x0800
-#define CSOR_RW_WRITE		0x1000
-#define CSOR_RW_BOTH		0x1800
-#define CSOR_RW_MASK		0x1800
-#define CSOR_STROBE_DS		0x0400
-#define CSOR_STROBE_AS		0x0000
-#define CSOR_STROBE_MASK	0x0400
-#define CSOR_DSACK_WAIT(x)	(wait << 6)
-#define CSOR_DSACK_FTERM	(14 << 6)
-#define CSOR_DSACK_EXTERNAL	(15 << 6)
-#define CSOR_DSACK_MASK		0x03c0
-#define CSOR_SPACE_CPU		0x0000
-#define CSOR_SPACE_USER		0x0010
-#define CSOR_SPACE_SU		0x0020
-#define CSOR_SPACE_BOTH		0x0030
-#define CSOR_SPACE_MASK		0x0030
-#define CSOR_IPL_ALL		0x0000
-#define CSOR_IPL_PRIORITY(x)	(x << 1)
-#define CSOR_IPL_MASK		0x000e
-#define CSOR_AVEC_ON		0x0001
-#define CSOR_AVEC_OFF		0x0000
-#define CSOR_AVEC_MASK		0x0001
-
-#define CSBAR_ADDR(x)		((addr >> 11) << 3) 
-#define CSBAR_ADDR_MASK		0xfff8
-#define CSBAR_BLKSIZE_2K	0x0000
-#define CSBAR_BLKSIZE_8K	0x0001
-#define CSBAR_BLKSIZE_16K	0x0002
-#define CSBAR_BLKSIZE_64K	0x0003
-#define CSBAR_BLKSIZE_128K	0x0004
-#define CSBAR_BLKSIZE_256K	0x0005
-#define CSBAR_BLKSIZE_512K	0x0006
-#define CSBAR_BLKSIZE_1M	0x0007
-#define CSBAR_BLKSIZE_MASK	0x0007
-
-#define CSPAR_DISC	0
-#define CSPAR_ALT	1
-#define CSPAR_CS8	2
-#define CSPAR_CS16	3
-#define CSPAR_MASK	3
-
-#define CSPAR0_CSBOOT(x) (x << 0)
-#define CSPAR0_CS0(x)	(x << 2)
-#define CSPAR0_CS1(x)	(x << 4)
-#define CSPAR0_CS2(x)	(x << 6)
-#define CSPAR0_CS3(x)	(x << 8)
-#define CSPAR0_CS4(x)	(x << 10)
-#define CSPAR0_CS5(x)	(x << 12)
-
-#define CSPAR1_CS6(x)	(x << 0)
-#define CSPAR1_CS7(x)	(x << 2)
-#define CSPAR1_CS8(x)	(x << 4)
-#define CSPAR1_CS9(x)	(x << 6)
-#define CSPAR1_CS10(x)	(x << 8)
-
-#endif
diff --git a/arch/m68knommu/include/asm/MC68EZ328.h b/arch/m68knommu/include/asm/MC68EZ328.h
deleted file mode 100644
index 69b7f9139e5e..000000000000
--- a/arch/m68knommu/include/asm/MC68EZ328.h
+++ /dev/null
@@ -1,1253 +0,0 @@
-
-/* include/asm-m68knommu/MC68EZ328.h: 'EZ328 control registers
- *
- * Copyright (C) 1999  Vladimir Gurevich <vgurevic@cisco.com>
- *                     Bear & Hare Software, Inc.
- *
- * Based on include/asm-m68knommu/MC68332.h
- * Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
- *                     The Silver Hammer Group, Ltd.
- *
- */
-
-#ifndef _MC68EZ328_H_
-#define _MC68EZ328_H_
-
-#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
-#define WORD_REF(addr) (*((volatile unsigned short*)addr))
-#define LONG_REF(addr) (*((volatile unsigned long*)addr))
-
-#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
-#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
-
-/********** 
- *
- * 0xFFFFF0xx -- System Control
- *
- **********/
- 
-/*
- * System Control Register (SCR)
- */
-#define SCR_ADDR	0xfffff000
-#define SCR		BYTE_REF(SCR_ADDR)
-
-#define SCR_WDTH8	0x01	/* 8-Bit Width Select */
-#define SCR_DMAP	0x04	/* Double Map */
-#define SCR_SO		0x08	/* Supervisor Only */
-#define SCR_BETEN	0x10	/* Bus-Error Time-Out Enable */
-#define SCR_PRV		0x20	/* Privilege Violation */
-#define SCR_WPV		0x40	/* Write Protect Violation */
-#define SCR_BETO	0x80	/* Bus-Error TimeOut */
-
-/*
- * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility)
- */
-#define MRR_ADDR 0xfffff004
-#define MRR	 LONG_REF(MRR_ADDR)
-
-/********** 
- *
- * 0xFFFFF1xx -- Chip-Select logic
- *
- **********/
- 
-/*
- * Chip Select Group Base Registers 
- */
-#define CSGBA_ADDR	0xfffff100
-#define CSGBB_ADDR	0xfffff102
-
-#define CSGBC_ADDR	0xfffff104
-#define CSGBD_ADDR	0xfffff106
-
-#define CSGBA		WORD_REF(CSGBA_ADDR)
-#define CSGBB		WORD_REF(CSGBB_ADDR)
-#define CSGBC		WORD_REF(CSGBC_ADDR)
-#define CSGBD		WORD_REF(CSGBD_ADDR)
-
-/*
- * Chip Select Registers 
- */
-#define CSA_ADDR	0xfffff110
-#define CSB_ADDR	0xfffff112
-#define CSC_ADDR	0xfffff114
-#define CSD_ADDR	0xfffff116
-
-#define CSA		WORD_REF(CSA_ADDR)
-#define CSB		WORD_REF(CSB_ADDR)
-#define CSC		WORD_REF(CSC_ADDR)
-#define CSD		WORD_REF(CSD_ADDR)
-
-#define CSA_EN		0x0001		/* Chip-Select Enable */
-#define CSA_SIZ_MASK	0x000e		/* Chip-Select Size */
-#define CSA_SIZ_SHIFT   1
-#define CSA_WS_MASK	0x0070		/* Wait State */
-#define CSA_WS_SHIFT    4
-#define CSA_BSW		0x0080		/* Data Bus Width */
-#define CSA_FLASH	0x0100		/* FLASH Memory Support */
-#define CSA_RO		0x8000		/* Read-Only */
-
-#define CSB_EN		0x0001		/* Chip-Select Enable */
-#define CSB_SIZ_MASK	0x000e		/* Chip-Select Size */
-#define CSB_SIZ_SHIFT   1
-#define CSB_WS_MASK	0x0070		/* Wait State */
-#define CSB_WS_SHIFT    4
-#define CSB_BSW		0x0080		/* Data Bus Width */
-#define CSB_FLASH	0x0100		/* FLASH Memory Support */
-#define CSB_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
-#define CSB_UPSIZ_SHIFT 11
-#define CSB_ROP		0x2000		/* Readonly if protected */
-#define CSB_SOP		0x4000		/* Supervisor only if protected */
-#define CSB_RO		0x8000		/* Read-Only */
-
-#define CSC_EN		0x0001		/* Chip-Select Enable */
-#define CSC_SIZ_MASK	0x000e		/* Chip-Select Size */
-#define CSC_SIZ_SHIFT   1
-#define CSC_WS_MASK	0x0070		/* Wait State */
-#define CSC_WS_SHIFT    4
-#define CSC_BSW		0x0080		/* Data Bus Width */
-#define CSC_FLASH	0x0100		/* FLASH Memory Support */
-#define CSC_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
-#define CSC_UPSIZ_SHIFT 11
-#define CSC_ROP		0x2000		/* Readonly if protected */
-#define CSC_SOP		0x4000		/* Supervisor only if protected */
-#define CSC_RO		0x8000		/* Read-Only */
-
-#define CSD_EN		0x0001		/* Chip-Select Enable */
-#define CSD_SIZ_MASK	0x000e		/* Chip-Select Size */
-#define CSD_SIZ_SHIFT   1
-#define CSD_WS_MASK	0x0070		/* Wait State */
-#define CSD_WS_SHIFT    4
-#define CSD_BSW		0x0080		/* Data Bus Width */
-#define CSD_FLASH	0x0100		/* FLASH Memory Support */
-#define CSD_DRAM	0x0200		/* Dram Selection */
-#define	CSD_COMB	0x0400		/* Combining */
-#define CSD_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
-#define CSD_UPSIZ_SHIFT 11
-#define CSD_ROP		0x2000		/* Readonly if protected */
-#define CSD_SOP		0x4000		/* Supervisor only if protected */
-#define CSD_RO		0x8000		/* Read-Only */
-
-/*
- * Emulation Chip-Select Register 
- */
-#define EMUCS_ADDR	0xfffff118
-#define EMUCS		WORD_REF(EMUCS_ADDR)
-
-#define EMUCS_WS_MASK	0x0070
-#define EMUCS_WS_SHIFT	4
-
-/********** 
- *
- * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
- *
- **********/
-
-/*
- * PLL Control Register 
- */
-#define PLLCR_ADDR	0xfffff200
-#define PLLCR		WORD_REF(PLLCR_ADDR)
-
-#define PLLCR_DISPLL	       0x0008	/* Disable PLL */
-#define PLLCR_CLKEN	       0x0010	/* Clock (CLKO pin) enable */
-#define PLLCR_PRESC	       0x0020	/* VCO prescaler */
-#define PLLCR_SYSCLK_SEL_MASK  0x0700	/* System Clock Selection */
-#define PLLCR_SYSCLK_SEL_SHIFT 8
-#define PLLCR_LCDCLK_SEL_MASK  0x3800	/* LCD Clock Selection */
-#define PLLCR_LCDCLK_SEL_SHIFT 11
-
-/* '328-compatible definitions */
-#define PLLCR_PIXCLK_SEL_MASK	PLLCR_LCDCLK_SEL_MASK
-#define PLLCR_PIXCLK_SEL_SHIFT	PLLCR_LCDCLK_SEL_SHIFT
-
-/*
- * PLL Frequency Select Register
- */
-#define PLLFSR_ADDR	0xfffff202
-#define PLLFSR		WORD_REF(PLLFSR_ADDR)
-
-#define PLLFSR_PC_MASK	0x00ff		/* P Count */
-#define PLLFSR_PC_SHIFT 0
-#define PLLFSR_QC_MASK	0x0f00		/* Q Count */
-#define PLLFSR_QC_SHIFT 8
-#define PLLFSR_PROT	0x4000		/* Protect P & Q */
-#define PLLFSR_CLK32	0x8000		/* Clock 32 (kHz) */
-
-/*
- * Power Control Register
- */
-#define PCTRL_ADDR	0xfffff207
-#define PCTRL		BYTE_REF(PCTRL_ADDR)
-
-#define PCTRL_WIDTH_MASK	0x1f	/* CPU Clock bursts width */
-#define PCTRL_WIDTH_SHIFT	0
-#define PCTRL_PCEN		0x80	/* Power Control Enable */
-
-/**********
- *
- * 0xFFFFF3xx -- Interrupt Controller
- *
- **********/
-
-/* 
- * Interrupt Vector Register
- */
-#define IVR_ADDR	0xfffff300
-#define IVR		BYTE_REF(IVR_ADDR)
-
-#define IVR_VECTOR_MASK 0xF8
-
-/*
- * Interrupt control Register
- */
-#define ICR_ADDR	0xfffff302
-#define ICR		WORD_REF(ICR_ADDR)
-
-#define ICR_POL5	0x0080	/* Polarity Control for IRQ5 */
-#define ICR_ET6		0x0100	/* Edge Trigger Select for IRQ6 */
-#define ICR_ET3		0x0200	/* Edge Trigger Select for IRQ3 */
-#define ICR_ET2		0x0400	/* Edge Trigger Select for IRQ2 */
-#define ICR_ET1		0x0800	/* Edge Trigger Select for IRQ1 */
-#define ICR_POL6	0x1000	/* Polarity Control for IRQ6 */
-#define ICR_POL3	0x2000	/* Polarity Control for IRQ3 */
-#define ICR_POL2	0x4000	/* Polarity Control for IRQ2 */
-#define ICR_POL1	0x8000	/* Polarity Control for IRQ1 */
-
-/*
- * Interrupt Mask Register
- */
-#define IMR_ADDR	0xfffff304
-#define IMR		LONG_REF(IMR_ADDR)
-
-/*
- * Define the names for bit positions first. This is useful for 
- * request_irq
- */
-#define SPI_IRQ_NUM	0	/* SPI interrupt */
-#define TMR_IRQ_NUM	1	/* Timer interrupt */
-#define UART_IRQ_NUM	2	/* UART interrupt */	
-#define	WDT_IRQ_NUM	3	/* Watchdog Timer interrupt */
-#define RTC_IRQ_NUM	4	/* RTC interrupt */
-#define	KB_IRQ_NUM	6	/* Keyboard Interrupt */
-#define PWM_IRQ_NUM	7	/* Pulse-Width Modulator int. */
-#define	INT0_IRQ_NUM	8	/* External INT0 */
-#define	INT1_IRQ_NUM	9	/* External INT1 */
-#define	INT2_IRQ_NUM	10	/* External INT2 */
-#define	INT3_IRQ_NUM	11	/* External INT3 */
-#define IRQ1_IRQ_NUM	16	/* IRQ1 */
-#define IRQ2_IRQ_NUM	17	/* IRQ2 */
-#define IRQ3_IRQ_NUM	18	/* IRQ3 */
-#define IRQ6_IRQ_NUM	19	/* IRQ6 */
-#define IRQ5_IRQ_NUM	20	/* IRQ5 */
-#define SAM_IRQ_NUM	22	/* Sampling Timer for RTC */
-#define EMIQ_IRQ_NUM	23	/* Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define SPIM_IRQ_NUM	SPI_IRQ_NUM
-#define TMR1_IRQ_NUM	TMR_IRQ_NUM
-
-/* 
- * Here go the bitmasks themselves
- */
-#define IMR_MSPI 	(1 << SPI_IRQ_NUM)	/* Mask SPI interrupt */
-#define	IMR_MTMR	(1 << TMR_IRQ_NUM)	/* Mask Timer interrupt */
-#define IMR_MUART	(1 << UART_IRQ_NUM)	/* Mask UART interrupt */	
-#define	IMR_MWDT	(1 << WDT_IRQ_NUM)	/* Mask Watchdog Timer interrupt */
-#define IMR_MRTC	(1 << RTC_IRQ_NUM)	/* Mask RTC interrupt */
-#define	IMR_MKB		(1 << KB_IRQ_NUM)	/* Mask Keyboard Interrupt */
-#define IMR_MPWM	(1 << PWM_IRQ_NUM)	/* Mask Pulse-Width Modulator int. */
-#define	IMR_MINT0	(1 << INT0_IRQ_NUM)	/* Mask External INT0 */
-#define	IMR_MINT1	(1 << INT1_IRQ_NUM)	/* Mask External INT1 */
-#define	IMR_MINT2	(1 << INT2_IRQ_NUM)	/* Mask External INT2 */
-#define	IMR_MINT3	(1 << INT3_IRQ_NUM)	/* Mask External INT3 */
-#define IMR_MIRQ1	(1 << IRQ1_IRQ_NUM)	/* Mask IRQ1 */
-#define IMR_MIRQ2	(1 << IRQ2_IRQ_NUM)	/* Mask IRQ2 */
-#define IMR_MIRQ3	(1 << IRQ3_IRQ_NUM)	/* Mask IRQ3 */
-#define IMR_MIRQ6	(1 << IRQ6_IRQ_NUM)	/* Mask IRQ6 */
-#define IMR_MIRQ5	(1 << IRQ5_IRQ_NUM)	/* Mask IRQ5 */
-#define IMR_MSAM	(1 << SAM_IRQ_NUM)	/* Mask Sampling Timer for RTC */
-#define IMR_MEMIQ	(1 << EMIQ_IRQ_NUM)	/* Mask Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define IMR_MSPIM	IMR_MSPI
-#define IMR_MTMR1	IMR_MTMR
-
-/* 
- * Interrupt Status Register 
- */
-#define ISR_ADDR	0xfffff30c
-#define ISR		LONG_REF(ISR_ADDR)
-
-#define ISR_SPI 	(1 << SPI_IRQ_NUM)	/* SPI interrupt */
-#define	ISR_TMR		(1 << TMR_IRQ_NUM)	/* Timer interrupt */
-#define ISR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
-#define	ISR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
-#define ISR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
-#define	ISR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
-#define ISR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator interrupt */
-#define	ISR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
-#define	ISR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
-#define	ISR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
-#define	ISR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
-#define ISR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
-#define ISR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
-#define ISR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
-#define ISR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
-#define ISR_IRQ5	(1 << IRQ5_IRQ_NUM)	/* IRQ5 */
-#define ISR_SAM		(1 << SAM_IRQ_NUM)	/* Sampling Timer for RTC */
-#define ISR_EMIQ	(1 << EMIQ_IRQ_NUM)	/* Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define ISR_SPIM	ISR_SPI
-#define ISR_TMR1	ISR_TMR
-
-/* 
- * Interrupt Pending Register 
- */
-#define IPR_ADDR	0xfffff30c
-#define IPR		LONG_REF(IPR_ADDR)
-
-#define IPR_SPI 	(1 << SPI_IRQ_NUM)	/* SPI interrupt */
-#define	IPR_TMR		(1 << TMR_IRQ_NUM)	/* Timer interrupt */
-#define IPR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
-#define	IPR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
-#define IPR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
-#define	IPR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
-#define IPR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator interrupt */
-#define	IPR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
-#define	IPR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
-#define	IPR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
-#define	IPR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
-#define IPR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
-#define IPR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
-#define IPR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
-#define IPR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
-#define IPR_IRQ5	(1 << IRQ5_IRQ_NUM)	/* IRQ5 */
-#define IPR_SAM		(1 << SAM_IRQ_NUM)	/* Sampling Timer for RTC */
-#define IPR_EMIQ	(1 << EMIQ_IRQ_NUM)	/* Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define IPR_SPIM	IPR_SPI
-#define IPR_TMR1	IPR_TMR
-
-/**********
- *
- * 0xFFFFF4xx -- Parallel Ports
- *
- **********/
-
-/*
- * Port A
- */
-#define PADIR_ADDR	0xfffff400		/* Port A direction reg */
-#define PADATA_ADDR	0xfffff401		/* Port A data register */
-#define PAPUEN_ADDR	0xfffff402		/* Port A Pull-Up enable reg */
-
-#define PADIR		BYTE_REF(PADIR_ADDR)
-#define PADATA		BYTE_REF(PADATA_ADDR)
-#define PAPUEN		BYTE_REF(PAPUEN_ADDR)
-
-#define PA(x)		(1 << (x))
-
-/* 
- * Port B
- */
-#define PBDIR_ADDR	0xfffff408		/* Port B direction reg */
-#define PBDATA_ADDR	0xfffff409		/* Port B data register */
-#define PBPUEN_ADDR	0xfffff40a		/* Port B Pull-Up enable reg */
-#define PBSEL_ADDR	0xfffff40b		/* Port B Select Register */
-
-#define PBDIR		BYTE_REF(PBDIR_ADDR)
-#define PBDATA		BYTE_REF(PBDATA_ADDR)
-#define PBPUEN		BYTE_REF(PBPUEN_ADDR)
-#define PBSEL		BYTE_REF(PBSEL_ADDR)
-
-#define PB(x)		(1 << (x))
-
-#define PB_CSB0		0x01	/* Use CSB0      as PB[0] */
-#define PB_CSB1		0x02	/* Use CSB1      as PB[1] */
-#define PB_CSC0_RAS0	0x04    /* Use CSC0/RAS0 as PB[2] */	
-#define PB_CSC1_RAS1	0x08    /* Use CSC1/RAS1 as PB[3] */	
-#define PB_CSD0_CAS0	0x10    /* Use CSD0/CAS0 as PB[4] */	
-#define PB_CSD1_CAS1	0x20    /* Use CSD1/CAS1 as PB[5] */
-#define PB_TIN_TOUT	0x40	/* Use TIN/TOUT  as PB[6] */
-#define PB_PWMO		0x80	/* Use PWMO      as PB[7] */
-
-/* 
- * Port C
- */
-#define PCDIR_ADDR	0xfffff410		/* Port C direction reg */
-#define PCDATA_ADDR	0xfffff411		/* Port C data register */
-#define PCPDEN_ADDR	0xfffff412		/* Port C Pull-Down enb. reg */
-#define PCSEL_ADDR	0xfffff413		/* Port C Select Register */
-
-#define PCDIR		BYTE_REF(PCDIR_ADDR)
-#define PCDATA		BYTE_REF(PCDATA_ADDR)
-#define PCPDEN		BYTE_REF(PCPDEN_ADDR)
-#define PCSEL		BYTE_REF(PCSEL_ADDR)
-
-#define PC(x)		(1 << (x))
-
-#define PC_LD0		0x01	/* Use LD0  as PC[0] */
-#define PC_LD1		0x02	/* Use LD1  as PC[1] */
-#define PC_LD2		0x04	/* Use LD2  as PC[2] */
-#define PC_LD3		0x08	/* Use LD3  as PC[3] */
-#define PC_LFLM		0x10	/* Use LFLM as PC[4] */
-#define PC_LLP 		0x20	/* Use LLP  as PC[5] */
-#define PC_LCLK		0x40	/* Use LCLK as PC[6] */
-#define PC_LACD		0x80	/* Use LACD as PC[7] */
-
-/* 
- * Port D
- */
-#define PDDIR_ADDR	0xfffff418		/* Port D direction reg */
-#define PDDATA_ADDR	0xfffff419		/* Port D data register */
-#define PDPUEN_ADDR	0xfffff41a		/* Port D Pull-Up enable reg */
-#define PDSEL_ADDR	0xfffff41b		/* Port D Select Register */
-#define PDPOL_ADDR	0xfffff41c		/* Port D Polarity Register */
-#define PDIRQEN_ADDR	0xfffff41d		/* Port D IRQ enable register */
-#define PDKBEN_ADDR	0xfffff41e		/* Port D Keyboard Enable reg */
-#define	PDIQEG_ADDR	0xfffff41f		/* Port D IRQ Edge Register */
-
-#define PDDIR		BYTE_REF(PDDIR_ADDR)
-#define PDDATA		BYTE_REF(PDDATA_ADDR)
-#define PDPUEN		BYTE_REF(PDPUEN_ADDR)
-#define PDSEL		BYTE_REF(PDSEL_ADDR)
-#define	PDPOL		BYTE_REF(PDPOL_ADDR)
-#define PDIRQEN		BYTE_REF(PDIRQEN_ADDR)
-#define PDKBEN		BYTE_REF(PDKBEN_ADDR)
-#define PDIQEG		BYTE_REF(PDIQEG_ADDR)
-
-#define PD(x)		(1 << (x))
-
-#define PD_INT0		0x01	/* Use INT0 as PD[0] */
-#define PD_INT1		0x02	/* Use INT1 as PD[1] */
-#define PD_INT2		0x04	/* Use INT2 as PD[2] */
-#define PD_INT3		0x08	/* Use INT3 as PD[3] */
-#define PD_IRQ1		0x10	/* Use IRQ1 as PD[4] */
-#define PD_IRQ2		0x20	/* Use IRQ2 as PD[5] */
-#define PD_IRQ3		0x40	/* Use IRQ3 as PD[6] */
-#define PD_IRQ6		0x80	/* Use IRQ6 as PD[7] */
-
-/* 
- * Port E
- */
-#define PEDIR_ADDR	0xfffff420		/* Port E direction reg */
-#define PEDATA_ADDR	0xfffff421		/* Port E data register */
-#define PEPUEN_ADDR	0xfffff422		/* Port E Pull-Up enable reg */
-#define PESEL_ADDR	0xfffff423		/* Port E Select Register */
-
-#define PEDIR		BYTE_REF(PEDIR_ADDR)
-#define PEDATA		BYTE_REF(PEDATA_ADDR)
-#define PEPUEN		BYTE_REF(PEPUEN_ADDR)
-#define PESEL		BYTE_REF(PESEL_ADDR)
-
-#define PE(x)		(1 << (x))
-
-#define PE_SPMTXD	0x01	/* Use SPMTXD as PE[0] */
-#define PE_SPMRXD	0x02	/* Use SPMRXD as PE[1] */
-#define PE_SPMCLK	0x04	/* Use SPMCLK as PE[2] */
-#define PE_DWE		0x08	/* Use DWE    as PE[3] */
-#define PE_RXD		0x10	/* Use RXD    as PE[4] */
-#define PE_TXD		0x20	/* Use TXD    as PE[5] */
-#define PE_RTS		0x40	/* Use RTS    as PE[6] */
-#define PE_CTS		0x80	/* Use CTS    as PE[7] */
-
-/* 
- * Port F
- */
-#define PFDIR_ADDR	0xfffff428		/* Port F direction reg */
-#define PFDATA_ADDR	0xfffff429		/* Port F data register */
-#define PFPUEN_ADDR	0xfffff42a		/* Port F Pull-Up enable reg */
-#define PFSEL_ADDR	0xfffff42b		/* Port F Select Register */
-
-#define PFDIR		BYTE_REF(PFDIR_ADDR)
-#define PFDATA		BYTE_REF(PFDATA_ADDR)
-#define PFPUEN		BYTE_REF(PFPUEN_ADDR)
-#define PFSEL		BYTE_REF(PFSEL_ADDR)
-
-#define PF(x)		(1 << (x))
-
-#define PF_LCONTRAST	0x01	/* Use LCONTRAST as PF[0] */
-#define PF_IRQ5         0x02    /* Use IRQ5      as PF[1] */
-#define PF_CLKO         0x04    /* Use CLKO      as PF[2] */
-#define PF_A20          0x08    /* Use A20       as PF[3] */
-#define PF_A21          0x10    /* Use A21       as PF[4] */
-#define PF_A22          0x20    /* Use A22       as PF[5] */
-#define PF_A23          0x40    /* Use A23       as PF[6] */
-#define PF_CSA1		0x80    /* Use CSA1      as PF[7] */
-
-/* 
- * Port G
- */
-#define PGDIR_ADDR	0xfffff430		/* Port G direction reg */
-#define PGDATA_ADDR	0xfffff431		/* Port G data register */
-#define PGPUEN_ADDR	0xfffff432		/* Port G Pull-Up enable reg */
-#define PGSEL_ADDR	0xfffff433		/* Port G Select Register */
-
-#define PGDIR		BYTE_REF(PGDIR_ADDR)
-#define PGDATA		BYTE_REF(PGDATA_ADDR)
-#define PGPUEN		BYTE_REF(PGPUEN_ADDR)
-#define PGSEL		BYTE_REF(PGSEL_ADDR)
-
-#define PG(x)		(1 << (x))
-
-#define PG_BUSW_DTACK	0x01	/* Use BUSW/DTACK as PG[0] */
-#define PG_A0		0x02	/* Use A0         as PG[1] */
-#define PG_EMUIRQ	0x04	/* Use EMUIRQ     as PG[2] */
-#define PG_HIZ_P_D	0x08	/* Use HIZ/P/D    as PG[3] */
-#define PG_EMUCS        0x10	/* Use EMUCS      as PG[4] */
-#define PG_EMUBRK	0x20	/* Use EMUBRK     as PG[5] */
-
-/**********
- *
- * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
- *
- **********/
-
-/*
- * PWM Control Register 
- */
-#define PWMC_ADDR	0xfffff500
-#define PWMC		WORD_REF(PWMC_ADDR)
-
-#define PWMC_CLKSEL_MASK	0x0003	/* Clock Selection */
-#define PWMC_CLKSEL_SHIFT	0
-#define PWMC_REPEAT_MASK	0x000c	/* Sample Repeats */
-#define PWMC_REPEAT_SHIFT	2
-#define PWMC_EN			0x0010	/* Enable PWM */
-#define PMNC_FIFOAV		0x0020	/* FIFO Available */
-#define PWMC_IRQEN		0x0040	/* Interrupt Request Enable */
-#define PWMC_IRQ		0x0080	/* Interrupt Request (FIFO empty) */
-#define PWMC_PRESCALER_MASK	0x7f00	/* Incoming Clock prescaler */
-#define PWMC_PRESCALER_SHIFT	8
-#define PWMC_CLKSRC		0x8000	/* Clock Source Select */
-
-/* '328-compatible definitions */
-#define PWMC_PWMEN	PWMC_EN
-
-/*
- * PWM Sample Register 
- */
-#define PWMS_ADDR	0xfffff502
-#define PWMS		WORD_REF(PWMS_ADDR)
-
-/*
- * PWM Period Register
- */
-#define PWMP_ADDR	0xfffff504
-#define PWMP		BYTE_REF(PWMP_ADDR)
-
-/*
- * PWM Counter Register
- */
-#define PWMCNT_ADDR	0xfffff505
-#define PWMCNT		BYTE_REF(PWMCNT_ADDR)
-
-/**********
- *
- * 0xFFFFF6xx -- General-Purpose Timer
- *
- **********/
-
-/* 
- * Timer Control register
- */
-#define TCTL_ADDR	0xfffff600
-#define TCTL		WORD_REF(TCTL_ADDR)
-
-#define	TCTL_TEN		0x0001	/* Timer Enable  */
-#define TCTL_CLKSOURCE_MASK 	0x000e	/* Clock Source: */
-#define   TCTL_CLKSOURCE_STOP	   0x0000	/* Stop count (disabled)    */
-#define   TCTL_CLKSOURCE_SYSCLK	   0x0002	/* SYSCLK to prescaler      */
-#define   TCTL_CLKSOURCE_SYSCLK_16 0x0004	/* SYSCLK/16 to prescaler   */
-#define   TCTL_CLKSOURCE_TIN	   0x0006	/* TIN to prescaler         */
-#define   TCTL_CLKSOURCE_32KHZ	   0x0008	/* 32kHz clock to prescaler */
-#define TCTL_IRQEN		0x0010	/* IRQ Enable    */
-#define TCTL_OM			0x0020	/* Output Mode   */
-#define TCTL_CAP_MASK		0x00c0	/* Capture Edge: */
-#define	  TCTL_CAP_RE		0x0040		/* Capture on rizing edge   */
-#define   TCTL_CAP_FE		0x0080		/* Capture on falling edge  */
-#define TCTL_FRR		0x0010	/* Free-Run Mode */
-
-/* '328-compatible definitions */
-#define TCTL1_ADDR	TCTL_ADDR
-#define TCTL1		TCTL
-
-/*
- * Timer Prescaler Register
- */
-#define TPRER_ADDR	0xfffff602
-#define TPRER		WORD_REF(TPRER_ADDR)
-
-/* '328-compatible definitions */
-#define TPRER1_ADDR	TPRER_ADDR
-#define TPRER1		TPRER
-
-/*
- * Timer Compare Register
- */
-#define TCMP_ADDR	0xfffff604
-#define TCMP		WORD_REF(TCMP_ADDR)
-
-/* '328-compatible definitions */
-#define TCMP1_ADDR	TCMP_ADDR
-#define TCMP1		TCMP
-
-/*
- * Timer Capture register
- */
-#define TCR_ADDR	0xfffff606
-#define TCR		WORD_REF(TCR_ADDR)
-
-/* '328-compatible definitions */
-#define TCR1_ADDR	TCR_ADDR
-#define TCR1		TCR
-
-/*
- * Timer Counter Register
- */
-#define TCN_ADDR	0xfffff608
-#define TCN		WORD_REF(TCN_ADDR)
-
-/* '328-compatible definitions */
-#define TCN1_ADDR	TCN_ADDR
-#define TCN1		TCN
-
-/*
- * Timer Status Register
- */
-#define TSTAT_ADDR	0xfffff60a
-#define TSTAT		WORD_REF(TSTAT_ADDR)
-
-#define TSTAT_COMP	0x0001		/* Compare Event occurred */
-#define TSTAT_CAPT	0x0001		/* Capture Event occurred */
-
-/* '328-compatible definitions */
-#define TSTAT1_ADDR	TSTAT_ADDR
-#define TSTAT1		TSTAT
-
-/**********
- *
- * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
- *
- **********/
-
-/*
- * SPIM Data Register
- */
-#define SPIMDATA_ADDR	0xfffff800
-#define SPIMDATA	WORD_REF(SPIMDATA_ADDR)
-
-/*
- * SPIM Control/Status Register
- */
-#define SPIMCONT_ADDR	0xfffff802
-#define SPIMCONT	WORD_REF(SPIMCONT_ADDR)
-
-#define SPIMCONT_BIT_COUNT_MASK	 0x000f	/* Transfer Length in Bytes */
-#define SPIMCONT_BIT_COUNT_SHIFT 0
-#define SPIMCONT_POL		 0x0010	/* SPMCLK Signel Polarity */
-#define	SPIMCONT_PHA		 0x0020	/* Clock/Data phase relationship */
-#define SPIMCONT_IRQEN		 0x0040 /* IRQ Enable */
-#define SPIMCONT_IRQ		 0x0080	/* Interrupt Request */
-#define SPIMCONT_XCH		 0x0100	/* Exchange */
-#define SPIMCONT_ENABLE		 0x0200	/* Enable SPIM */
-#define SPIMCONT_DATA_RATE_MASK	 0xe000	/* SPIM Data Rate */
-#define SPIMCONT_DATA_RATE_SHIFT 13
-
-/* '328-compatible definitions */
-#define SPIMCONT_SPIMIRQ	SPIMCONT_IRQ
-#define SPIMCONT_SPIMEN		SPIMCONT_ENABLE
-
-/**********
- *
- * 0xFFFFF9xx -- UART
- *
- **********/
-
-/*
- * UART Status/Control Register
- */
-#define USTCNT_ADDR	0xfffff900
-#define USTCNT		WORD_REF(USTCNT_ADDR)
-
-#define USTCNT_TXAE	0x0001	/* Transmitter Available Interrupt Enable */
-#define USTCNT_TXHE	0x0002	/* Transmitter Half Empty Enable */
-#define USTCNT_TXEE	0x0004	/* Transmitter Empty Interrupt Enable */
-#define USTCNT_RXRE	0x0008	/* Receiver Ready Interrupt Enable */
-#define USTCNT_RXHE	0x0010	/* Receiver Half-Full Interrupt Enable */
-#define USTCNT_RXFE	0x0020	/* Receiver Full Interrupt Enable */
-#define USTCNT_CTSD	0x0040	/* CTS Delta Interrupt Enable */
-#define USTCNT_ODEN	0x0080	/* Old Data Interrupt Enable */
-#define USTCNT_8_7	0x0100	/* Eight or seven-bit transmission */
-#define USTCNT_STOP	0x0200	/* Stop bit transmission */
-#define USTCNT_ODD	0x0400	/* Odd Parity */
-#define	USTCNT_PEN	0x0800	/* Parity Enable */
-#define USTCNT_CLKM	0x1000	/* Clock Mode Select */
-#define	USTCNT_TXEN	0x2000	/* Transmitter Enable */
-#define USTCNT_RXEN	0x4000	/* Receiver Enable */
-#define USTCNT_UEN	0x8000	/* UART Enable */
-
-/* '328-compatible definitions */
-#define USTCNT_TXAVAILEN	USTCNT_TXAE
-#define USTCNT_TXHALFEN		USTCNT_TXHE
-#define USTCNT_TXEMPTYEN	USTCNT_TXEE
-#define USTCNT_RXREADYEN	USTCNT_RXRE
-#define USTCNT_RXHALFEN		USTCNT_RXHE
-#define USTCNT_RXFULLEN		USTCNT_RXFE
-#define USTCNT_CTSDELTAEN	USTCNT_CTSD
-#define USTCNT_ODD_EVEN		USTCNT_ODD
-#define USTCNT_PARITYEN		USTCNT_PEN
-#define USTCNT_CLKMODE		USTCNT_CLKM
-#define USTCNT_UARTEN		USTCNT_UEN
-
-/*
- * UART Baud Control Register
- */
-#define UBAUD_ADDR	0xfffff902
-#define UBAUD		WORD_REF(UBAUD_ADDR)
-
-#define UBAUD_PRESCALER_MASK	0x003f	/* Actual divisor is 65 - PRESCALER */
-#define UBAUD_PRESCALER_SHIFT	0
-#define UBAUD_DIVIDE_MASK	0x0700	/* Baud Rate freq. divizor */
-#define UBAUD_DIVIDE_SHIFT	8
-#define UBAUD_BAUD_SRC		0x0800	/* Baud Rate Source */
-#define UBAUD_UCLKDIR		0x2000	/* UCLK Direction */
-
-/*
- * UART Receiver Register 
- */
-#define URX_ADDR	0xfffff904
-#define URX		WORD_REF(URX_ADDR)
-
-#define URX_RXDATA_ADDR	0xfffff905
-#define URX_RXDATA	BYTE_REF(URX_RXDATA_ADDR)
-
-#define URX_RXDATA_MASK	 0x00ff	/* Received data */
-#define URX_RXDATA_SHIFT 0
-#define URX_PARITY_ERROR 0x0100	/* Parity Error */
-#define URX_BREAK	 0x0200	/* Break Detected */
-#define URX_FRAME_ERROR	 0x0400	/* Framing Error */
-#define URX_OVRUN	 0x0800	/* Serial Overrun */
-#define URX_OLD_DATA	 0x1000	/* Old data in FIFO */
-#define URX_DATA_READY	 0x2000	/* Data Ready (FIFO not empty) */
-#define URX_FIFO_HALF	 0x4000 /* FIFO is Half-Full */
-#define URX_FIFO_FULL	 0x8000	/* FIFO is Full */
-
-/*
- * UART Transmitter Register 
- */
-#define UTX_ADDR	0xfffff906
-#define UTX		WORD_REF(UTX_ADDR)
-
-#define UTX_TXDATA_ADDR	0xfffff907
-#define UTX_TXDATA	BYTE_REF(UTX_TXDATA_ADDR)
-
-#define UTX_TXDATA_MASK	 0x00ff	/* Data to be transmitted */
-#define UTX_TXDATA_SHIFT 0
-#define UTX_CTS_DELTA	 0x0100	/* CTS changed */
-#define UTX_CTS_STAT	 0x0200	/* CTS State */
-#define	UTX_BUSY	 0x0400	/* FIFO is busy, sending a character */
-#define	UTX_NOCTS	 0x0800	/* Ignore CTS */
-#define UTX_SEND_BREAK	 0x1000	/* Send a BREAK */
-#define UTX_TX_AVAIL	 0x2000	/* Transmit FIFO has a slot available */
-#define UTX_FIFO_HALF	 0x4000	/* Transmit FIFO is half empty */
-#define UTX_FIFO_EMPTY	 0x8000	/* Transmit FIFO is empty */
-
-/* '328-compatible definitions */
-#define UTX_CTS_STATUS	UTX_CTS_STAT
-#define UTX_IGNORE_CTS	UTX_NOCTS
-
-/*
- * UART Miscellaneous Register 
- */
-#define UMISC_ADDR	0xfffff908
-#define UMISC		WORD_REF(UMISC_ADDR)
-
-#define UMISC_TX_POL	 0x0004	/* Transmit Polarity */
-#define UMISC_RX_POL	 0x0008	/* Receive Polarity */
-#define UMISC_IRDA_LOOP	 0x0010	/* IrDA Loopback Enable */
-#define UMISC_IRDA_EN	 0x0020	/* Infra-Red Enable */
-#define UMISC_RTS	 0x0040	/* Set RTS status */
-#define UMISC_RTSCONT	 0x0080	/* Choose RTS control */
-#define UMISC_IR_TEST	 0x0400	/* IRDA Test Enable */
-#define UMISC_BAUD_RESET 0x0800	/* Reset Baud Rate Generation Counters */
-#define UMISC_LOOP	 0x1000	/* Serial Loopback Enable */
-#define UMISC_FORCE_PERR 0x2000	/* Force Parity Error */
-#define UMISC_CLKSRC	 0x4000	/* Clock Source */
-#define UMISC_BAUD_TEST	 0x8000	/* Enable Baud Test Mode */
-
-/* 
- * UART Non-integer Prescaler Register
- */
-#define NIPR_ADDR	0xfffff90a
-#define NIPR		WORD_REF(NIPR_ADDR)
-
-#define NIPR_STEP_VALUE_MASK	0x00ff	/* NI prescaler step value */
-#define NIPR_STEP_VALUE_SHIFT	0
-#define NIPR_SELECT_MASK	0x0700	/* Tap Selection */
-#define NIPR_SELECT_SHIFT	8
-#define NIPR_PRE_SEL		0x8000	/* Non-integer prescaler select */
-
-
-/* generalization of uart control registers to support multiple ports: */
-typedef volatile struct {
-  volatile unsigned short int ustcnt;
-  volatile unsigned short int ubaud;
-  union {
-    volatile unsigned short int w;
-    struct {
-      volatile unsigned char status;
-      volatile unsigned char rxdata;
-    } b;
-  } urx;
-  union {
-    volatile unsigned short int w;
-    struct {
-      volatile unsigned char status;
-      volatile unsigned char txdata;
-    } b;
-  } utx;
-  volatile unsigned short int umisc;
-  volatile unsigned short int nipr;
-  volatile unsigned short int pad1;
-  volatile unsigned short int pad2;
-} __attribute__((packed)) m68328_uart;
-
-
-/**********
- *
- * 0xFFFFFAxx -- LCD Controller
- *
- **********/
-
-/*
- * LCD Screen Starting Address Register 
- */
-#define LSSA_ADDR	0xfffffa00
-#define LSSA		LONG_REF(LSSA_ADDR)
-
-#define LSSA_SSA_MASK	0x1ffffffe	/* Bits 0 and 29-31 are reserved */
-
-/*
- * LCD Virtual Page Width Register 
- */
-#define LVPW_ADDR	0xfffffa05
-#define LVPW		BYTE_REF(LVPW_ADDR)
-
-/*
- * LCD Screen Width Register (not compatible with '328 !!!) 
- */
-#define LXMAX_ADDR	0xfffffa08
-#define LXMAX		WORD_REF(LXMAX_ADDR)
-
-#define LXMAX_XM_MASK	0x02f0		/* Bits 0-3 and 10-15 are reserved */
-
-/*
- * LCD Screen Height Register
- */
-#define LYMAX_ADDR	0xfffffa0a
-#define LYMAX		WORD_REF(LYMAX_ADDR)
-
-#define LYMAX_YM_MASK	0x01ff		/* Bits 9-15 are reserved */
-
-/*
- * LCD Cursor X Position Register
- */
-#define LCXP_ADDR	0xfffffa18
-#define LCXP		WORD_REF(LCXP_ADDR)
-
-#define LCXP_CC_MASK	0xc000		/* Cursor Control */
-#define   LCXP_CC_TRAMSPARENT	0x0000
-#define   LCXP_CC_BLACK		0x4000
-#define   LCXP_CC_REVERSED	0x8000
-#define   LCXP_CC_WHITE		0xc000
-#define LCXP_CXP_MASK	0x02ff		/* Cursor X position */
-
-/*
- * LCD Cursor Y Position Register
- */
-#define LCYP_ADDR	0xfffffa1a
-#define LCYP		WORD_REF(LCYP_ADDR)
-
-#define LCYP_CYP_MASK	0x01ff		/* Cursor Y Position */
-
-/*
- * LCD Cursor Width and Heigth Register
- */
-#define LCWCH_ADDR	0xfffffa1c
-#define LCWCH		WORD_REF(LCWCH_ADDR)
-
-#define LCWCH_CH_MASK	0x001f		/* Cursor Height */
-#define LCWCH_CH_SHIFT	0
-#define LCWCH_CW_MASK	0x1f00		/* Cursor Width */
-#define LCWCH_CW_SHIFT	8
-
-/*
- * LCD Blink Control Register
- */
-#define LBLKC_ADDR	0xfffffa1f
-#define LBLKC		BYTE_REF(LBLKC_ADDR)
-
-#define LBLKC_BD_MASK	0x7f	/* Blink Divisor */
-#define LBLKC_BD_SHIFT	0
-#define LBLKC_BKEN	0x80	/* Blink Enabled */
-
-/*
- * LCD Panel Interface Configuration Register 
- */
-#define LPICF_ADDR	0xfffffa20
-#define LPICF		BYTE_REF(LPICF_ADDR)
-
-#define LPICF_GS_MASK	 0x03	 /* Gray-Scale Mode */
-#define	  LPICF_GS_BW	   0x00
-#define   LPICF_GS_GRAY_4  0x01
-#define   LPICF_GS_GRAY_16 0x02
-#define LPICF_PBSIZ_MASK 0x0c	/* Panel Bus Width */
-#define   LPICF_PBSIZ_1	   0x00
-#define   LPICF_PBSIZ_2    0x04
-#define   LPICF_PBSIZ_4    0x08
-
-/*
- * LCD Polarity Configuration Register 
- */
-#define LPOLCF_ADDR	0xfffffa21
-#define LPOLCF		BYTE_REF(LPOLCF_ADDR)
-
-#define LPOLCF_PIXPOL	0x01	/* Pixel Polarity */
-#define LPOLCF_LPPOL	0x02	/* Line Pulse Polarity */
-#define LPOLCF_FLMPOL	0x04	/* Frame Marker Polarity */
-#define LPOLCF_LCKPOL	0x08	/* LCD Shift Lock Polarity */
-
-/*
- * LACD (LCD Alternate Crystal Direction) Rate Control Register
- */
-#define LACDRC_ADDR	0xfffffa23
-#define LACDRC		BYTE_REF(LACDRC_ADDR)
-
-#define LACDRC_ACDSLT	 0x80	/* Signal Source Select */
-#define LACDRC_ACD_MASK	 0x0f	/* Alternate Crystal Direction Control */
-#define LACDRC_ACD_SHIFT 0
-
-/*
- * LCD Pixel Clock Divider Register
- */
-#define LPXCD_ADDR	0xfffffa25
-#define LPXCD		BYTE_REF(LPXCD_ADDR)
-
-#define	LPXCD_PCD_MASK	0x3f 	/* Pixel Clock Divider */
-#define LPXCD_PCD_SHIFT	0
-
-/*
- * LCD Clocking Control Register
- */
-#define LCKCON_ADDR	0xfffffa27
-#define LCKCON		BYTE_REF(LCKCON_ADDR)
-
-#define LCKCON_DWS_MASK	 0x0f	/* Display Wait-State */
-#define LCKCON_DWS_SHIFT 0
-#define LCKCON_DWIDTH	 0x40	/* Display Memory Width  */
-#define LCKCON_LCDON	 0x80	/* Enable LCD Controller */
-
-/* '328-compatible definitions */
-#define LCKCON_DW_MASK  LCKCON_DWS_MASK
-#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT
- 
-/*
- * LCD Refresh Rate Adjustment Register 
- */
-#define LRRA_ADDR	0xfffffa29
-#define LRRA		BYTE_REF(LRRA_ADDR)
-
-/*
- * LCD Panning Offset Register
- */
-#define LPOSR_ADDR	0xfffffa2d
-#define LPOSR		BYTE_REF(LPOSR_ADDR)
-
-#define LPOSR_POS_MASK	0x0f	/* Pixel Offset Code */
-#define LPOSR_POS_SHIFT	0
-
-/*
- * LCD Frame Rate Control Modulation Register
- */
-#define LFRCM_ADDR	0xfffffa31
-#define LFRCM		BYTE_REF(LFRCM_ADDR)
-
-#define LFRCM_YMOD_MASK	 0x0f	/* Vertical Modulation */
-#define LFRCM_YMOD_SHIFT 0
-#define LFRCM_XMOD_MASK	 0xf0	/* Horizontal Modulation */
-#define LFRCM_XMOD_SHIFT 4
-
-/*
- * LCD Gray Palette Mapping Register
- */
-#define LGPMR_ADDR	0xfffffa33
-#define LGPMR		BYTE_REF(LGPMR_ADDR)
-
-#define LGPMR_G1_MASK	0x0f
-#define LGPMR_G1_SHIFT	0
-#define LGPMR_G2_MASK	0xf0
-#define LGPMR_G2_SHIFT	4
-
-/* 
- * PWM Contrast Control Register
- */
-#define PWMR_ADDR	0xfffffa36
-#define PWMR		WORD_REF(PWMR_ADDR)
-
-#define PWMR_PW_MASK	0x00ff	/* Pulse Width */
-#define PWMR_PW_SHIFT	0
-#define PWMR_CCPEN	0x0100	/* Contrast Control Enable */
-#define PWMR_SRC_MASK	0x0600	/* Input Clock Source */
-#define   PWMR_SRC_LINE	  0x0000	/* Line Pulse  */
-#define   PWMR_SRC_PIXEL  0x0200	/* Pixel Clock */
-#define   PWMR_SRC_LCD    0x4000	/* LCD clock   */
-
-/**********
- *
- * 0xFFFFFBxx -- Real-Time Clock (RTC)
- *
- **********/
-
-/*
- * RTC Hours Minutes and Seconds Register
- */
-#define RTCTIME_ADDR	0xfffffb00
-#define RTCTIME		LONG_REF(RTCTIME_ADDR)
-
-#define RTCTIME_SECONDS_MASK	0x0000003f	/* Seconds */
-#define RTCTIME_SECONDS_SHIFT	0
-#define RTCTIME_MINUTES_MASK	0x003f0000	/* Minutes */
-#define RTCTIME_MINUTES_SHIFT	16
-#define RTCTIME_HOURS_MASK	0x1f000000	/* Hours */
-#define RTCTIME_HOURS_SHIFT	24
-
-/*
- *  RTC Alarm Register 
- */
-#define RTCALRM_ADDR    0xfffffb04
-#define RTCALRM         LONG_REF(RTCALRM_ADDR)
-
-#define RTCALRM_SECONDS_MASK    0x0000003f      /* Seconds */
-#define RTCALRM_SECONDS_SHIFT   0
-#define RTCALRM_MINUTES_MASK    0x003f0000      /* Minutes */
-#define RTCALRM_MINUTES_SHIFT   16
-#define RTCALRM_HOURS_MASK      0x1f000000      /* Hours */
-#define RTCALRM_HOURS_SHIFT     24
-
-/*
- * Watchdog Timer Register 
- */
-#define WATCHDOG_ADDR	0xfffffb0a
-#define WATCHDOG	WORD_REF(WATCHDOG_ADDR)
-
-#define WATCHDOG_EN	0x0001	/* Watchdog Enabled */
-#define WATCHDOG_ISEL	0x0002	/* Select the watchdog interrupt */
-#define WATCHDOG_INTF	0x0080	/* Watchdog interrupt occcured */
-#define WATCHDOG_CNT_MASK  0x0300	/* Watchdog Counter */
-#define WATCHDOG_CNT_SHIFT 8
-
-/*
- * RTC Control Register
- */
-#define RTCCTL_ADDR	0xfffffb0c
-#define RTCCTL		WORD_REF(RTCCTL_ADDR)
-
-#define RTCCTL_XTL	0x0020	/* Crystal Selection */
-#define RTCCTL_EN	0x0080	/* RTC Enable */
-
-/* '328-compatible definitions */
-#define RTCCTL_384	RTCCTL_XTL
-#define RTCCTL_ENABLE	RTCCTL_EN
-
-/*
- * RTC Interrupt Status Register 
- */
-#define RTCISR_ADDR	0xfffffb0e
-#define RTCISR		WORD_REF(RTCISR_ADDR)
-
-#define RTCISR_SW	0x0001	/* Stopwatch timed out */
-#define RTCISR_MIN	0x0002	/* 1-minute interrupt has occurred */
-#define RTCISR_ALM	0x0004	/* Alarm interrupt has occurred */
-#define RTCISR_DAY	0x0008	/* 24-hour rollover interrupt has occurred */
-#define RTCISR_1HZ	0x0010	/* 1Hz interrupt has occurred */
-#define RTCISR_HR	0x0020	/* 1-hour interrupt has occurred */
-#define RTCISR_SAM0	0x0100	/*   4Hz /   4.6875Hz interrupt has occurred */ 
-#define RTCISR_SAM1	0x0200	/*   8Hz /   9.3750Hz interrupt has occurred */ 
-#define RTCISR_SAM2	0x0400	/*  16Hz /  18.7500Hz interrupt has occurred */ 
-#define RTCISR_SAM3	0x0800	/*  32Hz /  37.5000Hz interrupt has occurred */ 
-#define RTCISR_SAM4	0x1000	/*  64Hz /  75.0000Hz interrupt has occurred */ 
-#define RTCISR_SAM5	0x2000	/* 128Hz / 150.0000Hz interrupt has occurred */ 
-#define RTCISR_SAM6	0x4000	/* 256Hz / 300.0000Hz interrupt has occurred */ 
-#define RTCISR_SAM7	0x8000	/* 512Hz / 600.0000Hz interrupt has occurred */ 
-
-/*
- * RTC Interrupt Enable Register
- */
-#define RTCIENR_ADDR	0xfffffb10
-#define RTCIENR		WORD_REF(RTCIENR_ADDR)
-
-#define RTCIENR_SW	0x0001	/* Stopwatch interrupt enable */
-#define RTCIENR_MIN	0x0002	/* 1-minute interrupt enable */
-#define RTCIENR_ALM	0x0004	/* Alarm interrupt enable */
-#define RTCIENR_DAY	0x0008	/* 24-hour rollover interrupt enable */
-#define RTCIENR_1HZ	0x0010	/* 1Hz interrupt enable */
-#define RTCIENR_HR	0x0020	/* 1-hour interrupt enable */
-#define RTCIENR_SAM0	0x0100	/*   4Hz /   4.6875Hz interrupt enable */ 
-#define RTCIENR_SAM1	0x0200	/*   8Hz /   9.3750Hz interrupt enable */ 
-#define RTCIENR_SAM2	0x0400	/*  16Hz /  18.7500Hz interrupt enable */ 
-#define RTCIENR_SAM3	0x0800	/*  32Hz /  37.5000Hz interrupt enable */ 
-#define RTCIENR_SAM4	0x1000	/*  64Hz /  75.0000Hz interrupt enable */ 
-#define RTCIENR_SAM5	0x2000	/* 128Hz / 150.0000Hz interrupt enable */ 
-#define RTCIENR_SAM6	0x4000	/* 256Hz / 300.0000Hz interrupt enable */ 
-#define RTCIENR_SAM7	0x8000	/* 512Hz / 600.0000Hz interrupt enable */ 
-
-/* 
- * Stopwatch Minutes Register
- */
-#define STPWCH_ADDR	0xfffffb12
-#define STPWCH		WORD_REF(STPWCH)
-
-#define STPWCH_CNT_MASK	 0x003f	/* Stopwatch countdown value */
-#define SPTWCH_CNT_SHIFT 0
-
-/*
- * RTC Day Count Register 
- */
-#define DAYR_ADDR	0xfffffb1a
-#define DAYR		WORD_REF(DAYR_ADDR)
-
-#define DAYR_DAYS_MASK	0x1ff	/* Day Setting */
-#define DAYR_DAYS_SHIFT 0
-
-/*
- * RTC Day Alarm Register 
- */
-#define DAYALARM_ADDR	0xfffffb1c
-#define DAYALARM	WORD_REF(DAYALARM_ADDR)
-
-#define DAYALARM_DAYSAL_MASK	0x01ff	/* Day Setting of the Alarm */
-#define DAYALARM_DAYSAL_SHIFT 	0
-
-/**********
- *
- * 0xFFFFFCxx -- DRAM Controller
- *
- **********/
-
-/*
- * DRAM Memory Configuration Register 
- */
-#define DRAMMC_ADDR	0xfffffc00
-#define DRAMMC		WORD_REF(DRAMMC_ADDR)
-
-#define DRAMMC_ROW12_MASK	0xc000	/* Row address bit for MD12 */
-#define   DRAMMC_ROW12_PA10	0x0000
-#define   DRAMMC_ROW12_PA21	0x4000	
-#define   DRAMMC_ROW12_PA23	0x8000
-#define	DRAMMC_ROW0_MASK	0x3000	/* Row address bit for MD0 */
-#define	  DRAMMC_ROW0_PA11	0x0000
-#define   DRAMMC_ROW0_PA22	0x1000
-#define   DRAMMC_ROW0_PA23	0x2000
-#define DRAMMC_ROW11		0x0800	/* Row address bit for MD11 PA20/PA22 */
-#define DRAMMC_ROW10		0x0400	/* Row address bit for MD10 PA19/PA21 */
-#define	DRAMMC_ROW9		0x0200	/* Row address bit for MD9  PA9/PA19  */
-#define DRAMMC_ROW8		0x0100	/* Row address bit for MD8  PA10/PA20 */
-#define DRAMMC_COL10		0x0080	/* Col address bit for MD10 PA11/PA0  */
-#define DRAMMC_COL9		0x0040	/* Col address bit for MD9  PA10/PA0  */
-#define DRAMMC_COL8		0x0020	/* Col address bit for MD8  PA9/PA0   */
-#define DRAMMC_REF_MASK		0x001f	/* Reresh Cycle */
-#define DRAMMC_REF_SHIFT	0
-
-/*
- * DRAM Control Register
- */
-#define DRAMC_ADDR	0xfffffc02
-#define DRAMC		WORD_REF(DRAMC_ADDR)
-
-#define DRAMC_DWE	   0x0001	/* DRAM Write Enable */
-#define DRAMC_RST	   0x0002	/* Reset Burst Refresh Enable */
-#define DRAMC_LPR	   0x0004	/* Low-Power Refresh Enable */
-#define DRAMC_SLW	   0x0008	/* Slow RAM */
-#define DRAMC_LSP	   0x0010	/* Light Sleep */
-#define DRAMC_MSW	   0x0020	/* Slow Multiplexing */
-#define DRAMC_WS_MASK	   0x00c0	/* Wait-states */
-#define DRAMC_WS_SHIFT	   6
-#define DRAMC_PGSZ_MASK    0x0300	/* Page Size for fast page mode */
-#define DRAMC_PGSZ_SHIFT   8
-#define   DRAMC_PGSZ_256K  0x0000	
-#define   DRAMC_PGSZ_512K  0x0100
-#define   DRAMC_PGSZ_1024K 0x0200
-#define	  DRAMC_PGSZ_2048K 0x0300
-#define DRAMC_EDO	   0x0400	/* EDO DRAM */
-#define DRAMC_CLK	   0x0800	/* Refresh Timer Clock source select */
-#define DRAMC_BC_MASK	   0x3000	/* Page Access Clock Cycle (FP mode) */
-#define DRAMC_BC_SHIFT	   12
-#define DRAMC_RM	   0x4000	/* Refresh Mode */
-#define DRAMC_EN	   0x8000	/* DRAM Controller enable */
-
-
-/**********
- *
- * 0xFFFFFDxx -- In-Circuit Emulation (ICE)
- *
- **********/
-
-/*
- * ICE Module Address Compare Register
- */
-#define ICEMACR_ADDR	0xfffffd00
-#define ICEMACR		LONG_REF(ICEMACR_ADDR)
-
-/*
- * ICE Module Address Mask Register
- */
-#define ICEMAMR_ADDR	0xfffffd04
-#define ICEMAMR		LONG_REF(ICEMAMR_ADDR)
-
-/*
- * ICE Module Control Compare Register
- */
-#define ICEMCCR_ADDR	0xfffffd08
-#define ICEMCCR		WORD_REF(ICEMCCR_ADDR)
-
-#define ICEMCCR_PD	0x0001	/* Program/Data Cycle Selection */
-#define ICEMCCR_RW	0x0002	/* Read/Write Cycle Selection */
-
-/*
- * ICE Module Control Mask Register
- */
-#define ICEMCMR_ADDR	0xfffffd0a
-#define ICEMCMR		WORD_REF(ICEMCMR_ADDR)
-
-#define ICEMCMR_PDM	0x0001	/* Program/Data Cycle Mask */
-#define ICEMCMR_RWM	0x0002	/* Read/Write Cycle Mask */
-
-/*
- * ICE Module Control Register 
- */
-#define ICEMCR_ADDR	0xfffffd0c
-#define ICEMCR		WORD_REF(ICEMCR_ADDR)
-
-#define ICEMCR_CEN	0x0001	/* Compare Enable */
-#define ICEMCR_PBEN	0x0002	/* Program Break Enable */
-#define ICEMCR_SB	0x0004	/* Single Breakpoint */
-#define ICEMCR_HMDIS	0x0008	/* HardMap disable */
-#define ICEMCR_BBIEN	0x0010	/* Bus Break Interrupt Enable */
-
-/*
- * ICE Module Status Register 
- */
-#define ICEMSR_ADDR	0xfffffd0e
-#define ICEMSR		WORD_REF(ICEMSR_ADDR)
-
-#define ICEMSR_EMUEN	0x0001	/* Emulation Enable */
-#define ICEMSR_BRKIRQ	0x0002	/* A-Line Vector Fetch Detected */
-#define ICEMSR_BBIRQ	0x0004	/* Bus Break Interrupt Detected */
-#define ICEMSR_EMIRQ	0x0008	/* EMUIRQ Falling Edge Detected */
-
-#endif /* _MC68EZ328_H_ */
diff --git a/arch/m68knommu/include/asm/MC68VZ328.h b/arch/m68knommu/include/asm/MC68VZ328.h
deleted file mode 100644
index 2b9bf626a0a5..000000000000
--- a/arch/m68knommu/include/asm/MC68VZ328.h
+++ /dev/null
@@ -1,1349 +0,0 @@
-
-/* include/asm-m68knommu/MC68VZ328.h: 'VZ328 control registers
- *
- * Copyright (c) 2000-2001	Lineo Inc. <www.lineo.com>
- * Copyright (c) 2000-2001	Lineo Canada Corp. <www.lineo.ca>
- * Copyright (C) 1999		Vladimir Gurevich <vgurevic@cisco.com>
- * 				Bare & Hare Software, Inc.
- * Based on include/asm-m68knommu/MC68332.h
- * Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
- *                     The Silver Hammer Group, Ltd.
- *
- * M68VZ328 fixes by Evan Stawnyczy <evan@lineo.com>
- * vz multiport fixes by Michael Leslie <mleslie@lineo.com>
- */
-
-#ifndef _MC68VZ328_H_
-#define _MC68VZ328_H_
-
-#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
-#define WORD_REF(addr) (*((volatile unsigned short*)addr))
-#define LONG_REF(addr) (*((volatile unsigned long*)addr))
-
-#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
-#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
-
-/********** 
- *
- * 0xFFFFF0xx -- System Control
- *
- **********/
- 
-/*
- * System Control Register (SCR)
- */
-#define SCR_ADDR	0xfffff000
-#define SCR		BYTE_REF(SCR_ADDR)
-
-#define SCR_WDTH8	0x01	/* 8-Bit Width Select */
-#define SCR_DMAP	0x04	/* Double Map */
-#define SCR_SO		0x08	/* Supervisor Only */
-#define SCR_BETEN	0x10	/* Bus-Error Time-Out Enable */
-#define SCR_PRV		0x20	/* Privilege Violation */
-#define SCR_WPV		0x40	/* Write Protect Violation */
-#define SCR_BETO	0x80	/* Bus-Error TimeOut */
-
-/*
- * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility)
- */
-#define MRR_ADDR 0xfffff004
-#define MRR	 LONG_REF(MRR_ADDR)
-
-/********** 
- *
- * 0xFFFFF1xx -- Chip-Select logic
- *
- **********/
- 
-/*
- * Chip Select Group Base Registers 
- */
-#define CSGBA_ADDR	0xfffff100
-#define CSGBB_ADDR	0xfffff102
-
-#define CSGBC_ADDR	0xfffff104
-#define CSGBD_ADDR	0xfffff106
-
-#define CSGBA		WORD_REF(CSGBA_ADDR)
-#define CSGBB		WORD_REF(CSGBB_ADDR)
-#define CSGBC		WORD_REF(CSGBC_ADDR)
-#define CSGBD		WORD_REF(CSGBD_ADDR)
-
-/*
- * Chip Select Registers 
- */
-#define CSA_ADDR	0xfffff110
-#define CSB_ADDR	0xfffff112
-#define CSC_ADDR	0xfffff114
-#define CSD_ADDR	0xfffff116
-
-#define CSA		WORD_REF(CSA_ADDR)
-#define CSB		WORD_REF(CSB_ADDR)
-#define CSC		WORD_REF(CSC_ADDR)
-#define CSD		WORD_REF(CSD_ADDR)
-
-#define CSA_EN		0x0001		/* Chip-Select Enable */
-#define CSA_SIZ_MASK	0x000e		/* Chip-Select Size */
-#define CSA_SIZ_SHIFT   1
-#define CSA_WS_MASK	0x0070		/* Wait State */
-#define CSA_WS_SHIFT    4
-#define CSA_BSW		0x0080		/* Data Bus Width */
-#define CSA_FLASH	0x0100		/* FLASH Memory Support */
-#define CSA_RO		0x8000		/* Read-Only */
-
-#define CSB_EN		0x0001		/* Chip-Select Enable */
-#define CSB_SIZ_MASK	0x000e		/* Chip-Select Size */
-#define CSB_SIZ_SHIFT   1
-#define CSB_WS_MASK	0x0070		/* Wait State */
-#define CSB_WS_SHIFT    4
-#define CSB_BSW		0x0080		/* Data Bus Width */
-#define CSB_FLASH	0x0100		/* FLASH Memory Support */
-#define CSB_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
-#define CSB_UPSIZ_SHIFT 11
-#define CSB_ROP		0x2000		/* Readonly if protected */
-#define CSB_SOP		0x4000		/* Supervisor only if protected */
-#define CSB_RO		0x8000		/* Read-Only */
-
-#define CSC_EN		0x0001		/* Chip-Select Enable */
-#define CSC_SIZ_MASK	0x000e		/* Chip-Select Size */
-#define CSC_SIZ_SHIFT   1
-#define CSC_WS_MASK	0x0070		/* Wait State */
-#define CSC_WS_SHIFT    4
-#define CSC_BSW		0x0080		/* Data Bus Width */
-#define CSC_FLASH	0x0100		/* FLASH Memory Support */
-#define CSC_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
-#define CSC_UPSIZ_SHIFT 11
-#define CSC_ROP		0x2000		/* Readonly if protected */
-#define CSC_SOP		0x4000		/* Supervisor only if protected */
-#define CSC_RO		0x8000		/* Read-Only */
-
-#define CSD_EN		0x0001		/* Chip-Select Enable */
-#define CSD_SIZ_MASK	0x000e		/* Chip-Select Size */
-#define CSD_SIZ_SHIFT   1
-#define CSD_WS_MASK	0x0070		/* Wait State */
-#define CSD_WS_SHIFT    4
-#define CSD_BSW		0x0080		/* Data Bus Width */
-#define CSD_FLASH	0x0100		/* FLASH Memory Support */
-#define CSD_DRAM	0x0200		/* Dram Selection */
-#define	CSD_COMB	0x0400		/* Combining */
-#define CSD_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
-#define CSD_UPSIZ_SHIFT 11
-#define CSD_ROP		0x2000		/* Readonly if protected */
-#define CSD_SOP		0x4000		/* Supervisor only if protected */
-#define CSD_RO		0x8000		/* Read-Only */
-
-/*
- * Emulation Chip-Select Register 
- */
-#define EMUCS_ADDR	0xfffff118
-#define EMUCS		WORD_REF(EMUCS_ADDR)
-
-#define EMUCS_WS_MASK	0x0070
-#define EMUCS_WS_SHIFT	4
-
-/********** 
- *
- * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
- *
- **********/
-
-/*
- * PLL Control Register 
- */
-#define PLLCR_ADDR	0xfffff200
-#define PLLCR		WORD_REF(PLLCR_ADDR)
-
-#define PLLCR_DISPLL	       0x0008	/* Disable PLL */
-#define PLLCR_CLKEN	       0x0010	/* Clock (CLKO pin) enable */
-#define PLLCR_PRESC	       0x0020	/* VCO prescaler */
-#define PLLCR_SYSCLK_SEL_MASK  0x0700	/* System Clock Selection */
-#define PLLCR_SYSCLK_SEL_SHIFT 8
-#define PLLCR_LCDCLK_SEL_MASK  0x3800	/* LCD Clock Selection */
-#define PLLCR_LCDCLK_SEL_SHIFT 11
-
-/* '328-compatible definitions */
-#define PLLCR_PIXCLK_SEL_MASK	PLLCR_LCDCLK_SEL_MASK
-#define PLLCR_PIXCLK_SEL_SHIFT	PLLCR_LCDCLK_SEL_SHIFT
-
-/*
- * PLL Frequency Select Register
- */
-#define PLLFSR_ADDR	0xfffff202
-#define PLLFSR		WORD_REF(PLLFSR_ADDR)
-
-#define PLLFSR_PC_MASK	0x00ff		/* P Count */
-#define PLLFSR_PC_SHIFT 0
-#define PLLFSR_QC_MASK	0x0f00		/* Q Count */
-#define PLLFSR_QC_SHIFT 8
-#define PLLFSR_PROT	0x4000		/* Protect P & Q */
-#define PLLFSR_CLK32	0x8000		/* Clock 32 (kHz) */
-
-/*
- * Power Control Register
- */
-#define PCTRL_ADDR	0xfffff207
-#define PCTRL		BYTE_REF(PCTRL_ADDR)
-
-#define PCTRL_WIDTH_MASK	0x1f	/* CPU Clock bursts width */
-#define PCTRL_WIDTH_SHIFT	0
-#define PCTRL_PCEN		0x80	/* Power Control Enable */
-
-/**********
- *
- * 0xFFFFF3xx -- Interrupt Controller
- *
- **********/
-
-/* 
- * Interrupt Vector Register
- */
-#define IVR_ADDR	0xfffff300
-#define IVR		BYTE_REF(IVR_ADDR)
-
-#define IVR_VECTOR_MASK 0xF8
-
-/*
- * Interrupt control Register
- */
-#define ICR_ADDR	0xfffff302
-#define ICR		WORD_REF(ICR_ADDR)
-
-#define ICR_POL5	0x0080	/* Polarity Control for IRQ5 */
-#define ICR_ET6		0x0100	/* Edge Trigger Select for IRQ6 */
-#define ICR_ET3		0x0200	/* Edge Trigger Select for IRQ3 */
-#define ICR_ET2		0x0400	/* Edge Trigger Select for IRQ2 */
-#define ICR_ET1		0x0800	/* Edge Trigger Select for IRQ1 */
-#define ICR_POL6	0x1000	/* Polarity Control for IRQ6 */
-#define ICR_POL3	0x2000	/* Polarity Control for IRQ3 */
-#define ICR_POL2	0x4000	/* Polarity Control for IRQ2 */
-#define ICR_POL1	0x8000	/* Polarity Control for IRQ1 */
-
-/*
- * Interrupt Mask Register
- */
-#define IMR_ADDR	0xfffff304
-#define IMR		LONG_REF(IMR_ADDR)
-
-/*
- * Define the names for bit positions first. This is useful for 
- * request_irq
- */
-#define SPI2_IRQ_NUM	0	/* SPI 2 interrupt */
-#define TMR_IRQ_NUM	1	/* Timer 1 interrupt */
-#define UART1_IRQ_NUM	2	/* UART 1 interrupt */	
-#define	WDT_IRQ_NUM	3	/* Watchdog Timer interrupt */
-#define RTC_IRQ_NUM	4	/* RTC interrupt */
-#define TMR2_IRQ_NUM	5	/* Timer 2 interrupt */
-#define	KB_IRQ_NUM	6	/* Keyboard Interrupt */
-#define PWM1_IRQ_NUM	7	/* Pulse-Width Modulator 1 int. */
-#define	INT0_IRQ_NUM	8	/* External INT0 */
-#define	INT1_IRQ_NUM	9	/* External INT1 */
-#define	INT2_IRQ_NUM	10	/* External INT2 */
-#define	INT3_IRQ_NUM	11	/* External INT3 */
-#define UART2_IRQ_NUM	12	/* UART 2 interrupt */	
-#define PWM2_IRQ_NUM	13	/* Pulse-Width Modulator 1 int. */
-#define IRQ1_IRQ_NUM	16	/* IRQ1 */
-#define IRQ2_IRQ_NUM	17	/* IRQ2 */
-#define IRQ3_IRQ_NUM	18	/* IRQ3 */
-#define IRQ6_IRQ_NUM	19	/* IRQ6 */
-#define IRQ5_IRQ_NUM	20	/* IRQ5 */
-#define SPI1_IRQ_NUM	21	/* SPI 1 interrupt */
-#define SAM_IRQ_NUM	22	/* Sampling Timer for RTC */
-#define EMIQ_IRQ_NUM	23	/* Emulator Interrupt */
-
-#define SPI_IRQ_NUM	SPI2_IRQ_NUM
-
-/* '328-compatible definitions */
-#define SPIM_IRQ_NUM	SPI_IRQ_NUM
-#define TMR1_IRQ_NUM	TMR_IRQ_NUM
-#define UART_IRQ_NUM	UART1_IRQ_NUM
-
-/* 
- * Here go the bitmasks themselves
- */
-#define IMR_MSPI 	(1 << SPI_IRQ_NUM)	/* Mask SPI interrupt */
-#define	IMR_MTMR	(1 << TMR_IRQ_NUM)	/* Mask Timer interrupt */
-#define IMR_MUART	(1 << UART_IRQ_NUM)	/* Mask UART interrupt */	
-#define	IMR_MWDT	(1 << WDT_IRQ_NUM)	/* Mask Watchdog Timer interrupt */
-#define IMR_MRTC	(1 << RTC_IRQ_NUM)	/* Mask RTC interrupt */
-#define	IMR_MKB		(1 << KB_IRQ_NUM)	/* Mask Keyboard Interrupt */
-#define IMR_MPWM	(1 << PWM_IRQ_NUM)	/* Mask Pulse-Width Modulator int. */
-#define	IMR_MINT0	(1 << INT0_IRQ_NUM)	/* Mask External INT0 */
-#define	IMR_MINT1	(1 << INT1_IRQ_NUM)	/* Mask External INT1 */
-#define	IMR_MINT2	(1 << INT2_IRQ_NUM)	/* Mask External INT2 */
-#define	IMR_MINT3	(1 << INT3_IRQ_NUM)	/* Mask External INT3 */
-#define IMR_MIRQ1	(1 << IRQ1_IRQ_NUM)	/* Mask IRQ1 */
-#define IMR_MIRQ2	(1 << IRQ2_IRQ_NUM)	/* Mask IRQ2 */
-#define IMR_MIRQ3	(1 << IRQ3_IRQ_NUM)	/* Mask IRQ3 */
-#define IMR_MIRQ6	(1 << IRQ6_IRQ_NUM)	/* Mask IRQ6 */
-#define IMR_MIRQ5	(1 << IRQ5_IRQ_NUM)	/* Mask IRQ5 */
-#define IMR_MSAM	(1 << SAM_IRQ_NUM)	/* Mask Sampling Timer for RTC */
-#define IMR_MEMIQ	(1 << EMIQ_IRQ_NUM)	/* Mask Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define IMR_MSPIM	IMR_MSPI
-#define IMR_MTMR1	IMR_MTMR
-
-/* 
- * Interrupt Status Register 
- */
-#define ISR_ADDR	0xfffff30c
-#define ISR		LONG_REF(ISR_ADDR)
-
-#define ISR_SPI 	(1 << SPI_IRQ_NUM)	/* SPI interrupt */
-#define	ISR_TMR		(1 << TMR_IRQ_NUM)	/* Timer interrupt */
-#define ISR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
-#define	ISR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
-#define ISR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
-#define	ISR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
-#define ISR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator interrupt */
-#define	ISR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
-#define	ISR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
-#define	ISR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
-#define	ISR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
-#define ISR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
-#define ISR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
-#define ISR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
-#define ISR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
-#define ISR_IRQ5	(1 << IRQ5_IRQ_NUM)	/* IRQ5 */
-#define ISR_SAM		(1 << SAM_IRQ_NUM)	/* Sampling Timer for RTC */
-#define ISR_EMIQ	(1 << EMIQ_IRQ_NUM)	/* Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define ISR_SPIM	ISR_SPI
-#define ISR_TMR1	ISR_TMR
-
-/* 
- * Interrupt Pending Register 
- */
-#define IPR_ADDR	0xfffff30c
-#define IPR		LONG_REF(IPR_ADDR)
-
-#define IPR_SPI 	(1 << SPI_IRQ_NUM)	/* SPI interrupt */
-#define	IPR_TMR		(1 << TMR_IRQ_NUM)	/* Timer interrupt */
-#define IPR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
-#define	IPR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
-#define IPR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
-#define	IPR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
-#define IPR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator interrupt */
-#define	IPR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
-#define	IPR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
-#define	IPR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
-#define	IPR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
-#define IPR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
-#define IPR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
-#define IPR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
-#define IPR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
-#define IPR_IRQ5	(1 << IRQ5_IRQ_NUM)	/* IRQ5 */
-#define IPR_SAM		(1 << SAM_IRQ_NUM)	/* Sampling Timer for RTC */
-#define IPR_EMIQ	(1 << EMIQ_IRQ_NUM)	/* Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define IPR_SPIM	IPR_SPI
-#define IPR_TMR1	IPR_TMR
-
-/**********
- *
- * 0xFFFFF4xx -- Parallel Ports
- *
- **********/
-
-/*
- * Port A
- */
-#define PADIR_ADDR	0xfffff400		/* Port A direction reg */
-#define PADATA_ADDR	0xfffff401		/* Port A data register */
-#define PAPUEN_ADDR	0xfffff402		/* Port A Pull-Up enable reg */
-
-#define PADIR		BYTE_REF(PADIR_ADDR)
-#define PADATA		BYTE_REF(PADATA_ADDR)
-#define PAPUEN		BYTE_REF(PAPUEN_ADDR)
-
-#define PA(x)		(1 << (x))
-
-/* 
- * Port B
- */
-#define PBDIR_ADDR	0xfffff408		/* Port B direction reg */
-#define PBDATA_ADDR	0xfffff409		/* Port B data register */
-#define PBPUEN_ADDR	0xfffff40a		/* Port B Pull-Up enable reg */
-#define PBSEL_ADDR	0xfffff40b		/* Port B Select Register */
-
-#define PBDIR		BYTE_REF(PBDIR_ADDR)
-#define PBDATA		BYTE_REF(PBDATA_ADDR)
-#define PBPUEN		BYTE_REF(PBPUEN_ADDR)
-#define PBSEL		BYTE_REF(PBSEL_ADDR)
-
-#define PB(x)		(1 << (x))
-
-#define PB_CSB0		0x01	/* Use CSB0      as PB[0] */
-#define PB_CSB1		0x02	/* Use CSB1      as PB[1] */
-#define PB_CSC0_RAS0	0x04    /* Use CSC0/RAS0 as PB[2] */	
-#define PB_CSC1_RAS1	0x08    /* Use CSC1/RAS1 as PB[3] */	
-#define PB_CSD0_CAS0	0x10    /* Use CSD0/CAS0 as PB[4] */	
-#define PB_CSD1_CAS1	0x20    /* Use CSD1/CAS1 as PB[5] */
-#define PB_TIN_TOUT	0x40	/* Use TIN/TOUT  as PB[6] */
-#define PB_PWMO		0x80	/* Use PWMO      as PB[7] */
-
-/* 
- * Port C
- */
-#define PCDIR_ADDR	0xfffff410		/* Port C direction reg */
-#define PCDATA_ADDR	0xfffff411		/* Port C data register */
-#define PCPDEN_ADDR	0xfffff412		/* Port C Pull-Down enb. reg */
-#define PCSEL_ADDR	0xfffff413		/* Port C Select Register */
-
-#define PCDIR		BYTE_REF(PCDIR_ADDR)
-#define PCDATA		BYTE_REF(PCDATA_ADDR)
-#define PCPDEN		BYTE_REF(PCPDEN_ADDR)
-#define PCSEL		BYTE_REF(PCSEL_ADDR)
-
-#define PC(x)		(1 << (x))
-
-#define PC_LD0		0x01	/* Use LD0  as PC[0] */
-#define PC_LD1		0x02	/* Use LD1  as PC[1] */
-#define PC_LD2		0x04	/* Use LD2  as PC[2] */
-#define PC_LD3		0x08	/* Use LD3  as PC[3] */
-#define PC_LFLM		0x10	/* Use LFLM as PC[4] */
-#define PC_LLP 		0x20	/* Use LLP  as PC[5] */
-#define PC_LCLK		0x40	/* Use LCLK as PC[6] */
-#define PC_LACD		0x80	/* Use LACD as PC[7] */
-
-/* 
- * Port D
- */
-#define PDDIR_ADDR	0xfffff418		/* Port D direction reg */
-#define PDDATA_ADDR	0xfffff419		/* Port D data register */
-#define PDPUEN_ADDR	0xfffff41a		/* Port D Pull-Up enable reg */
-#define PDSEL_ADDR	0xfffff41b		/* Port D Select Register */
-#define PDPOL_ADDR	0xfffff41c		/* Port D Polarity Register */
-#define PDIRQEN_ADDR	0xfffff41d		/* Port D IRQ enable register */
-#define PDKBEN_ADDR	0xfffff41e		/* Port D Keyboard Enable reg */
-#define	PDIQEG_ADDR	0xfffff41f		/* Port D IRQ Edge Register */
-
-#define PDDIR		BYTE_REF(PDDIR_ADDR)
-#define PDDATA		BYTE_REF(PDDATA_ADDR)
-#define PDPUEN		BYTE_REF(PDPUEN_ADDR)
-#define PDSEL		BYTE_REF(PDSEL_ADDR)
-#define	PDPOL		BYTE_REF(PDPOL_ADDR)
-#define PDIRQEN		BYTE_REF(PDIRQEN_ADDR)
-#define PDKBEN		BYTE_REF(PDKBEN_ADDR)
-#define PDIQEG		BYTE_REF(PDIQEG_ADDR)
-
-#define PD(x)		(1 << (x))
-
-#define PD_INT0		0x01	/* Use INT0 as PD[0] */
-#define PD_INT1		0x02	/* Use INT1 as PD[1] */
-#define PD_INT2		0x04	/* Use INT2 as PD[2] */
-#define PD_INT3		0x08	/* Use INT3 as PD[3] */
-#define PD_IRQ1		0x10	/* Use IRQ1 as PD[4] */
-#define PD_IRQ2		0x20	/* Use IRQ2 as PD[5] */
-#define PD_IRQ3		0x40	/* Use IRQ3 as PD[6] */
-#define PD_IRQ6		0x80	/* Use IRQ6 as PD[7] */
-
-/* 
- * Port E
- */
-#define PEDIR_ADDR	0xfffff420		/* Port E direction reg */
-#define PEDATA_ADDR	0xfffff421		/* Port E data register */
-#define PEPUEN_ADDR	0xfffff422		/* Port E Pull-Up enable reg */
-#define PESEL_ADDR	0xfffff423		/* Port E Select Register */
-
-#define PEDIR		BYTE_REF(PEDIR_ADDR)
-#define PEDATA		BYTE_REF(PEDATA_ADDR)
-#define PEPUEN		BYTE_REF(PEPUEN_ADDR)
-#define PESEL		BYTE_REF(PESEL_ADDR)
-
-#define PE(x)		(1 << (x))
-
-#define PE_SPMTXD	0x01	/* Use SPMTXD as PE[0] */
-#define PE_SPMRXD	0x02	/* Use SPMRXD as PE[1] */
-#define PE_SPMCLK	0x04	/* Use SPMCLK as PE[2] */
-#define PE_DWE		0x08	/* Use DWE    as PE[3] */
-#define PE_RXD		0x10	/* Use RXD    as PE[4] */
-#define PE_TXD		0x20	/* Use TXD    as PE[5] */
-#define PE_RTS		0x40	/* Use RTS    as PE[6] */
-#define PE_CTS		0x80	/* Use CTS    as PE[7] */
-
-/* 
- * Port F
- */
-#define PFDIR_ADDR	0xfffff428		/* Port F direction reg */
-#define PFDATA_ADDR	0xfffff429		/* Port F data register */
-#define PFPUEN_ADDR	0xfffff42a		/* Port F Pull-Up enable reg */
-#define PFSEL_ADDR	0xfffff42b		/* Port F Select Register */
-
-#define PFDIR		BYTE_REF(PFDIR_ADDR)
-#define PFDATA		BYTE_REF(PFDATA_ADDR)
-#define PFPUEN		BYTE_REF(PFPUEN_ADDR)
-#define PFSEL		BYTE_REF(PFSEL_ADDR)
-
-#define PF(x)		(1 << (x))
-
-#define PF_LCONTRAST	0x01	/* Use LCONTRAST as PF[0] */
-#define PF_IRQ5         0x02    /* Use IRQ5      as PF[1] */
-#define PF_CLKO         0x04    /* Use CLKO      as PF[2] */
-#define PF_A20          0x08    /* Use A20       as PF[3] */
-#define PF_A21          0x10    /* Use A21       as PF[4] */
-#define PF_A22          0x20    /* Use A22       as PF[5] */
-#define PF_A23          0x40    /* Use A23       as PF[6] */
-#define PF_CSA1		0x80    /* Use CSA1      as PF[7] */
-
-/* 
- * Port G
- */
-#define PGDIR_ADDR	0xfffff430		/* Port G direction reg */
-#define PGDATA_ADDR	0xfffff431		/* Port G data register */
-#define PGPUEN_ADDR	0xfffff432		/* Port G Pull-Up enable reg */
-#define PGSEL_ADDR	0xfffff433		/* Port G Select Register */
-
-#define PGDIR		BYTE_REF(PGDIR_ADDR)
-#define PGDATA		BYTE_REF(PGDATA_ADDR)
-#define PGPUEN		BYTE_REF(PGPUEN_ADDR)
-#define PGSEL		BYTE_REF(PGSEL_ADDR)
-
-#define PG(x)		(1 << (x))
-
-#define PG_BUSW_DTACK	0x01	/* Use BUSW/DTACK as PG[0] */
-#define PG_A0		0x02	/* Use A0         as PG[1] */
-#define PG_EMUIRQ	0x04	/* Use EMUIRQ     as PG[2] */
-#define PG_HIZ_P_D	0x08	/* Use HIZ/P/D    as PG[3] */
-#define PG_EMUCS        0x10	/* Use EMUCS      as PG[4] */
-#define PG_EMUBRK	0x20	/* Use EMUBRK     as PG[5] */
-
-/* 
- * Port J
- */
-#define PJDIR_ADDR	0xfffff438		/* Port J direction reg */
-#define PJDATA_ADDR	0xfffff439		/* Port J data register */
-#define PJPUEN_ADDR	0xfffff43A		/* Port J Pull-Up enb. reg */
-#define PJSEL_ADDR	0xfffff43B		/* Port J Select Register */
-
-#define PJDIR		BYTE_REF(PJDIR_ADDR)
-#define PJDATA		BYTE_REF(PJDATA_ADDR)
-#define PJPUEN		BYTE_REF(PJPUEN_ADDR)
-#define PJSEL		BYTE_REF(PJSEL_ADDR)
-
-#define PJ(x)		(1 << (x))
-
-/*
- * Port K
- */
-#define PKDIR_ADDR	0xfffff440		/* Port K direction reg */
-#define PKDATA_ADDR	0xfffff441		/* Port K data register */
-#define PKPUEN_ADDR	0xfffff442		/* Port K Pull-Up enb. reg */
-#define PKSEL_ADDR	0xfffff443		/* Port K Select Register */
-
-#define PKDIR		BYTE_REF(PKDIR_ADDR)
-#define PKDATA		BYTE_REF(PKDATA_ADDR)
-#define PKPUEN		BYTE_REF(PKPUEN_ADDR)
-#define PKSEL		BYTE_REF(PKSEL_ADDR)
-
-#define PK(x)		(1 << (x))
-
-#define PK_DATAREADY		0x01	/* Use ~DATA_READY  as PK[0] */
-#define PK_PWM2		0x01	/* Use PWM2  as PK[0] */
-#define PK_R_W		0x02	/* Use R/W  as PK[1] */
-#define PK_LDS		0x04	/* Use /LDS  as PK[2] */
-#define PK_UDS		0x08	/* Use /UDS  as PK[3] */
-#define PK_LD4		0x10	/* Use LD4 as PK[4] */
-#define PK_LD5 		0x20	/* Use LD5  as PK[5] */
-#define PK_LD6		0x40	/* Use LD6 as PK[6] */
-#define PK_LD7		0x80	/* Use LD7 as PK[7] */
-
-#define PJDIR_ADDR	0xfffff438		/* Port J direction reg */
-#define PJDATA_ADDR	0xfffff439		/* Port J data register */
-#define PJPUEN_ADDR	0xfffff43A		/* Port J Pull-Up enable reg */
-#define PJSEL_ADDR	0xfffff43B		/* Port J Select Register */
-
-#define PJDIR		BYTE_REF(PJDIR_ADDR)
-#define PJDATA		BYTE_REF(PJDATA_ADDR)
-#define PJPUEN		BYTE_REF(PJPUEN_ADDR)
-#define PJSEL		BYTE_REF(PJSEL_ADDR)
-
-#define PJ(x)		(1 << (x))
-
-#define PJ_MOSI 	0x01	/* Use MOSI       as PJ[0] */
-#define PJ_MISO		0x02	/* Use MISO       as PJ[1] */
-#define PJ_SPICLK1  	0x04	/* Use SPICLK1    as PJ[2] */
-#define PJ_SS   	0x08	/* Use SS         as PJ[3] */
-#define PJ_RXD2         0x10	/* Use RXD2       as PJ[4] */
-#define PJ_TXD2  	0x20	/* Use TXD2       as PJ[5] */
-#define PJ_RTS2  	0x40	/* Use RTS2       as PJ[5] */
-#define PJ_CTS2  	0x80	/* Use CTS2       as PJ[5] */
-
-/*
- * Port M
- */
-#define PMDIR_ADDR	0xfffff448		/* Port M direction reg */
-#define PMDATA_ADDR	0xfffff449		/* Port M data register */
-#define PMPUEN_ADDR	0xfffff44a		/* Port M Pull-Up enable reg */
-#define PMSEL_ADDR	0xfffff44b		/* Port M Select Register */
-
-#define PMDIR		BYTE_REF(PMDIR_ADDR)
-#define PMDATA		BYTE_REF(PMDATA_ADDR)
-#define PMPUEN		BYTE_REF(PMPUEN_ADDR)
-#define PMSEL		BYTE_REF(PMSEL_ADDR)
-
-#define PM(x)		(1 << (x))
-
-#define PM_SDCLK	0x01	/* Use SDCLK      as PM[0] */
-#define PM_SDCE		0x02	/* Use SDCE       as PM[1] */
-#define PM_DQMH 	0x04	/* Use DQMH       as PM[2] */
-#define PM_DQML 	0x08	/* Use DQML       as PM[3] */
-#define PM_SDA10        0x10	/* Use SDA10      as PM[4] */
-#define PM_DMOE 	0x20	/* Use DMOE       as PM[5] */
-
-/**********
- *
- * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
- *
- **********/
-
-/*
- * PWM Control Register
- */
-#define PWMC_ADDR	0xfffff500
-#define PWMC		WORD_REF(PWMC_ADDR)
-
-#define PWMC_CLKSEL_MASK	0x0003	/* Clock Selection */
-#define PWMC_CLKSEL_SHIFT	0
-#define PWMC_REPEAT_MASK	0x000c	/* Sample Repeats */
-#define PWMC_REPEAT_SHIFT	2
-#define PWMC_EN			0x0010	/* Enable PWM */
-#define PMNC_FIFOAV		0x0020	/* FIFO Available */
-#define PWMC_IRQEN		0x0040	/* Interrupt Request Enable */
-#define PWMC_IRQ		0x0080	/* Interrupt Request (FIFO empty) */
-#define PWMC_PRESCALER_MASK	0x7f00	/* Incoming Clock prescaler */
-#define PWMC_PRESCALER_SHIFT	8
-#define PWMC_CLKSRC		0x8000	/* Clock Source Select */
-
-/* '328-compatible definitions */
-#define PWMC_PWMEN	PWMC_EN
-
-/*
- * PWM Sample Register 
- */
-#define PWMS_ADDR	0xfffff502
-#define PWMS		WORD_REF(PWMS_ADDR)
-
-/*
- * PWM Period Register
- */
-#define PWMP_ADDR	0xfffff504
-#define PWMP		BYTE_REF(PWMP_ADDR)
-
-/*
- * PWM Counter Register
- */
-#define PWMCNT_ADDR	0xfffff505
-#define PWMCNT		BYTE_REF(PWMCNT_ADDR)
-
-/**********
- *
- * 0xFFFFF6xx -- General-Purpose Timer
- *
- **********/
-
-/* 
- * Timer Control register
- */
-#define TCTL_ADDR	0xfffff600
-#define TCTL		WORD_REF(TCTL_ADDR)
-
-#define	TCTL_TEN		0x0001	/* Timer Enable  */
-#define TCTL_CLKSOURCE_MASK 	0x000e	/* Clock Source: */
-#define   TCTL_CLKSOURCE_STOP	   0x0000	/* Stop count (disabled)    */
-#define   TCTL_CLKSOURCE_SYSCLK	   0x0002	/* SYSCLK to prescaler      */
-#define   TCTL_CLKSOURCE_SYSCLK_16 0x0004	/* SYSCLK/16 to prescaler   */
-#define   TCTL_CLKSOURCE_TIN	   0x0006	/* TIN to prescaler         */
-#define   TCTL_CLKSOURCE_32KHZ	   0x0008	/* 32kHz clock to prescaler */
-#define TCTL_IRQEN		0x0010	/* IRQ Enable    */
-#define TCTL_OM			0x0020	/* Output Mode   */
-#define TCTL_CAP_MASK		0x00c0	/* Capture Edge: */
-#define	  TCTL_CAP_RE		0x0040		/* Capture on rizing edge   */
-#define   TCTL_CAP_FE		0x0080		/* Capture on falling edge  */
-#define TCTL_FRR		0x0010	/* Free-Run Mode */
-
-/* '328-compatible definitions */
-#define TCTL1_ADDR	TCTL_ADDR
-#define TCTL1		TCTL
-
-/*
- * Timer Prescaler Register
- */
-#define TPRER_ADDR	0xfffff602
-#define TPRER		WORD_REF(TPRER_ADDR)
-
-/* '328-compatible definitions */
-#define TPRER1_ADDR	TPRER_ADDR
-#define TPRER1		TPRER
-
-/*
- * Timer Compare Register
- */
-#define TCMP_ADDR	0xfffff604
-#define TCMP		WORD_REF(TCMP_ADDR)
-
-/* '328-compatible definitions */
-#define TCMP1_ADDR	TCMP_ADDR
-#define TCMP1		TCMP
-
-/*
- * Timer Capture register
- */
-#define TCR_ADDR	0xfffff606
-#define TCR		WORD_REF(TCR_ADDR)
-
-/* '328-compatible definitions */
-#define TCR1_ADDR	TCR_ADDR
-#define TCR1		TCR
-
-/*
- * Timer Counter Register
- */
-#define TCN_ADDR	0xfffff608
-#define TCN		WORD_REF(TCN_ADDR)
-
-/* '328-compatible definitions */
-#define TCN1_ADDR	TCN_ADDR
-#define TCN1		TCN
-
-/*
- * Timer Status Register
- */
-#define TSTAT_ADDR	0xfffff60a
-#define TSTAT		WORD_REF(TSTAT_ADDR)
-
-#define TSTAT_COMP	0x0001		/* Compare Event occurred */
-#define TSTAT_CAPT	0x0001		/* Capture Event occurred */
-
-/* '328-compatible definitions */
-#define TSTAT1_ADDR	TSTAT_ADDR
-#define TSTAT1		TSTAT
-
-/**********
- *
- * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
- *
- **********/
-
-/*
- * SPIM Data Register
- */
-#define SPIMDATA_ADDR	0xfffff800
-#define SPIMDATA	WORD_REF(SPIMDATA_ADDR)
-
-/*
- * SPIM Control/Status Register
- */
-#define SPIMCONT_ADDR	0xfffff802
-#define SPIMCONT	WORD_REF(SPIMCONT_ADDR)
-
-#define SPIMCONT_BIT_COUNT_MASK	 0x000f	/* Transfer Length in Bytes */
-#define SPIMCONT_BIT_COUNT_SHIFT 0
-#define SPIMCONT_POL		 0x0010	/* SPMCLK Signel Polarity */
-#define	SPIMCONT_PHA		 0x0020	/* Clock/Data phase relationship */
-#define SPIMCONT_IRQEN		 0x0040 /* IRQ Enable */
-#define SPIMCONT_IRQ		 0x0080	/* Interrupt Request */
-#define SPIMCONT_XCH		 0x0100	/* Exchange */
-#define SPIMCONT_ENABLE		 0x0200	/* Enable SPIM */
-#define SPIMCONT_DATA_RATE_MASK	 0xe000	/* SPIM Data Rate */
-#define SPIMCONT_DATA_RATE_SHIFT 13
-
-/* '328-compatible definitions */
-#define SPIMCONT_SPIMIRQ	SPIMCONT_IRQ
-#define SPIMCONT_SPIMEN		SPIMCONT_ENABLE
-
-/**********
- *
- * 0xFFFFF9xx -- UART
- *
- **********/
-
-/*
- * UART Status/Control Register
- */
-
-#define USTCNT_ADDR	0xfffff900
-#define USTCNT		WORD_REF(USTCNT_ADDR)
-
-#define USTCNT_TXAE	0x0001	/* Transmitter Available Interrupt Enable */
-#define USTCNT_TXHE	0x0002	/* Transmitter Half Empty Enable */
-#define USTCNT_TXEE	0x0004	/* Transmitter Empty Interrupt Enable */
-#define USTCNT_RXRE	0x0008	/* Receiver Ready Interrupt Enable */
-#define USTCNT_RXHE	0x0010	/* Receiver Half-Full Interrupt Enable */
-#define USTCNT_RXFE	0x0020	/* Receiver Full Interrupt Enable */
-#define USTCNT_CTSD	0x0040	/* CTS Delta Interrupt Enable */
-#define USTCNT_ODEN	0x0080	/* Old Data Interrupt Enable */
-#define USTCNT_8_7	0x0100	/* Eight or seven-bit transmission */
-#define USTCNT_STOP	0x0200	/* Stop bit transmission */
-#define USTCNT_ODD	0x0400	/* Odd Parity */
-#define	USTCNT_PEN	0x0800	/* Parity Enable */
-#define USTCNT_CLKM	0x1000	/* Clock Mode Select */
-#define	USTCNT_TXEN	0x2000	/* Transmitter Enable */
-#define USTCNT_RXEN	0x4000	/* Receiver Enable */
-#define USTCNT_UEN	0x8000	/* UART Enable */
-
-/* '328-compatible definitions */
-#define USTCNT_TXAVAILEN	USTCNT_TXAE
-#define USTCNT_TXHALFEN		USTCNT_TXHE
-#define USTCNT_TXEMPTYEN	USTCNT_TXEE
-#define USTCNT_RXREADYEN	USTCNT_RXRE
-#define USTCNT_RXHALFEN		USTCNT_RXHE
-#define USTCNT_RXFULLEN		USTCNT_RXFE
-#define USTCNT_CTSDELTAEN	USTCNT_CTSD
-#define USTCNT_ODD_EVEN		USTCNT_ODD
-#define USTCNT_PARITYEN		USTCNT_PEN
-#define USTCNT_CLKMODE		USTCNT_CLKM
-#define USTCNT_UARTEN		USTCNT_UEN
-
-/*
- * UART Baud Control Register
- */
-#define UBAUD_ADDR	0xfffff902
-#define UBAUD		WORD_REF(UBAUD_ADDR)
-
-#define UBAUD_PRESCALER_MASK	0x003f	/* Actual divisor is 65 - PRESCALER */
-#define UBAUD_PRESCALER_SHIFT	0
-#define UBAUD_DIVIDE_MASK	0x0700	/* Baud Rate freq. divizor */
-#define UBAUD_DIVIDE_SHIFT	8
-#define UBAUD_BAUD_SRC		0x0800	/* Baud Rate Source */
-#define UBAUD_UCLKDIR		0x2000	/* UCLK Direction */
-
-/*
- * UART Receiver Register 
- */
-#define URX_ADDR	0xfffff904
-#define URX		WORD_REF(URX_ADDR)
-
-#define URX_RXDATA_ADDR	0xfffff905
-#define URX_RXDATA	BYTE_REF(URX_RXDATA_ADDR)
-
-#define URX_RXDATA_MASK	 0x00ff	/* Received data */
-#define URX_RXDATA_SHIFT 0
-#define URX_PARITY_ERROR 0x0100	/* Parity Error */
-#define URX_BREAK	 0x0200	/* Break Detected */
-#define URX_FRAME_ERROR	 0x0400	/* Framing Error */
-#define URX_OVRUN	 0x0800	/* Serial Overrun */
-#define URX_OLD_DATA	 0x1000	/* Old data in FIFO */
-#define URX_DATA_READY	 0x2000	/* Data Ready (FIFO not empty) */
-#define URX_FIFO_HALF	 0x4000 /* FIFO is Half-Full */
-#define URX_FIFO_FULL	 0x8000	/* FIFO is Full */
-
-/*
- * UART Transmitter Register 
- */
-#define UTX_ADDR	0xfffff906
-#define UTX		WORD_REF(UTX_ADDR)
-
-#define UTX_TXDATA_ADDR	0xfffff907
-#define UTX_TXDATA	BYTE_REF(UTX_TXDATA_ADDR)
-
-#define UTX_TXDATA_MASK	 0x00ff	/* Data to be transmitted */
-#define UTX_TXDATA_SHIFT 0
-#define UTX_CTS_DELTA	 0x0100	/* CTS changed */
-#define UTX_CTS_STAT	 0x0200	/* CTS State */
-#define	UTX_BUSY	 0x0400	/* FIFO is busy, sending a character */
-#define	UTX_NOCTS	 0x0800	/* Ignore CTS */
-#define UTX_SEND_BREAK	 0x1000	/* Send a BREAK */
-#define UTX_TX_AVAIL	 0x2000	/* Transmit FIFO has a slot available */
-#define UTX_FIFO_HALF	 0x4000	/* Transmit FIFO is half empty */
-#define UTX_FIFO_EMPTY	 0x8000	/* Transmit FIFO is empty */
-
-/* '328-compatible definitions */
-#define UTX_CTS_STATUS	UTX_CTS_STAT
-#define UTX_IGNORE_CTS	UTX_NOCTS
-
-/*
- * UART Miscellaneous Register 
- */
-#define UMISC_ADDR	0xfffff908
-#define UMISC		WORD_REF(UMISC_ADDR)
-
-#define UMISC_TX_POL	 0x0004	/* Transmit Polarity */
-#define UMISC_RX_POL	 0x0008	/* Receive Polarity */
-#define UMISC_IRDA_LOOP	 0x0010	/* IrDA Loopback Enable */
-#define UMISC_IRDA_EN	 0x0020	/* Infra-Red Enable */
-#define UMISC_RTS	 0x0040	/* Set RTS status */
-#define UMISC_RTSCONT	 0x0080	/* Choose RTS control */
-#define UMISC_IR_TEST	 0x0400	/* IRDA Test Enable */
-#define UMISC_BAUD_RESET 0x0800	/* Reset Baud Rate Generation Counters */
-#define UMISC_LOOP	 0x1000	/* Serial Loopback Enable */
-#define UMISC_FORCE_PERR 0x2000	/* Force Parity Error */
-#define UMISC_CLKSRC	 0x4000	/* Clock Source */
-#define UMISC_BAUD_TEST	 0x8000	/* Enable Baud Test Mode */
-
-/* 
- * UART Non-integer Prescaler Register
- */
-#define NIPR_ADDR	0xfffff90a
-#define NIPR		WORD_REF(NIPR_ADDR)
-
-#define NIPR_STEP_VALUE_MASK	0x00ff	/* NI prescaler step value */
-#define NIPR_STEP_VALUE_SHIFT	0
-#define NIPR_SELECT_MASK	0x0700	/* Tap Selection */
-#define NIPR_SELECT_SHIFT	8
-#define NIPR_PRE_SEL		0x8000	/* Non-integer prescaler select */
-
-
-/* generalization of uart control registers to support multiple ports: */
-typedef struct {
-  volatile unsigned short int ustcnt;
-  volatile unsigned short int ubaud;
-  union {
-    volatile unsigned short int w;
-    struct {
-      volatile unsigned char status;
-      volatile unsigned char rxdata;
-    } b;
-  } urx;
-  union {
-    volatile unsigned short int w;
-    struct {
-      volatile unsigned char status;
-      volatile unsigned char txdata;
-    } b;
-  } utx;
-  volatile unsigned short int umisc;
-  volatile unsigned short int nipr;
-  volatile unsigned short int hmark;
-  volatile unsigned short int unused;
-} __attribute__((packed)) m68328_uart;
-
-
-
-
-/**********
- *
- * 0xFFFFFAxx -- LCD Controller
- *
- **********/
-
-/*
- * LCD Screen Starting Address Register 
- */
-#define LSSA_ADDR	0xfffffa00
-#define LSSA		LONG_REF(LSSA_ADDR)
-
-#define LSSA_SSA_MASK	0x1ffffffe	/* Bits 0 and 29-31 are reserved */
-
-/*
- * LCD Virtual Page Width Register 
- */
-#define LVPW_ADDR	0xfffffa05
-#define LVPW		BYTE_REF(LVPW_ADDR)
-
-/*
- * LCD Screen Width Register (not compatible with '328 !!!) 
- */
-#define LXMAX_ADDR	0xfffffa08
-#define LXMAX		WORD_REF(LXMAX_ADDR)
-
-#define LXMAX_XM_MASK	0x02f0		/* Bits 0-3 and 10-15 are reserved */
-
-/*
- * LCD Screen Height Register
- */
-#define LYMAX_ADDR	0xfffffa0a
-#define LYMAX		WORD_REF(LYMAX_ADDR)
-
-#define LYMAX_YM_MASK	0x01ff		/* Bits 9-15 are reserved */
-
-/*
- * LCD Cursor X Position Register
- */
-#define LCXP_ADDR	0xfffffa18
-#define LCXP		WORD_REF(LCXP_ADDR)
-
-#define LCXP_CC_MASK	0xc000		/* Cursor Control */
-#define   LCXP_CC_TRAMSPARENT	0x0000
-#define   LCXP_CC_BLACK		0x4000
-#define   LCXP_CC_REVERSED	0x8000
-#define   LCXP_CC_WHITE		0xc000
-#define LCXP_CXP_MASK	0x02ff		/* Cursor X position */
-
-/*
- * LCD Cursor Y Position Register
- */
-#define LCYP_ADDR	0xfffffa1a
-#define LCYP		WORD_REF(LCYP_ADDR)
-
-#define LCYP_CYP_MASK	0x01ff		/* Cursor Y Position */
-
-/*
- * LCD Cursor Width and Heigth Register
- */
-#define LCWCH_ADDR	0xfffffa1c
-#define LCWCH		WORD_REF(LCWCH_ADDR)
-
-#define LCWCH_CH_MASK	0x001f		/* Cursor Height */
-#define LCWCH_CH_SHIFT	0
-#define LCWCH_CW_MASK	0x1f00		/* Cursor Width */
-#define LCWCH_CW_SHIFT	8
-
-/*
- * LCD Blink Control Register
- */
-#define LBLKC_ADDR	0xfffffa1f
-#define LBLKC		BYTE_REF(LBLKC_ADDR)
-
-#define LBLKC_BD_MASK	0x7f	/* Blink Divisor */
-#define LBLKC_BD_SHIFT	0
-#define LBLKC_BKEN	0x80	/* Blink Enabled */
-
-/*
- * LCD Panel Interface Configuration Register 
- */
-#define LPICF_ADDR	0xfffffa20
-#define LPICF		BYTE_REF(LPICF_ADDR)
-
-#define LPICF_GS_MASK	 0x03	 /* Gray-Scale Mode */
-#define	  LPICF_GS_BW	   0x00
-#define   LPICF_GS_GRAY_4  0x01
-#define   LPICF_GS_GRAY_16 0x02
-#define LPICF_PBSIZ_MASK 0x0c	/* Panel Bus Width */
-#define   LPICF_PBSIZ_1	   0x00
-#define   LPICF_PBSIZ_2    0x04
-#define   LPICF_PBSIZ_4    0x08
-
-/*
- * LCD Polarity Configuration Register 
- */
-#define LPOLCF_ADDR	0xfffffa21
-#define LPOLCF		BYTE_REF(LPOLCF_ADDR)
-
-#define LPOLCF_PIXPOL	0x01	/* Pixel Polarity */
-#define LPOLCF_LPPOL	0x02	/* Line Pulse Polarity */
-#define LPOLCF_FLMPOL	0x04	/* Frame Marker Polarity */
-#define LPOLCF_LCKPOL	0x08	/* LCD Shift Lock Polarity */
-
-/*
- * LACD (LCD Alternate Crystal Direction) Rate Control Register
- */
-#define LACDRC_ADDR	0xfffffa23
-#define LACDRC		BYTE_REF(LACDRC_ADDR)
-
-#define LACDRC_ACDSLT	 0x80	/* Signal Source Select */
-#define LACDRC_ACD_MASK	 0x0f	/* Alternate Crystal Direction Control */
-#define LACDRC_ACD_SHIFT 0
-
-/*
- * LCD Pixel Clock Divider Register
- */
-#define LPXCD_ADDR	0xfffffa25
-#define LPXCD		BYTE_REF(LPXCD_ADDR)
-
-#define	LPXCD_PCD_MASK	0x3f 	/* Pixel Clock Divider */
-#define LPXCD_PCD_SHIFT	0
-
-/*
- * LCD Clocking Control Register
- */
-#define LCKCON_ADDR	0xfffffa27
-#define LCKCON		BYTE_REF(LCKCON_ADDR)
-
-#define LCKCON_DWS_MASK	 0x0f	/* Display Wait-State */
-#define LCKCON_DWS_SHIFT 0
-#define LCKCON_DWIDTH	 0x40	/* Display Memory Width  */
-#define LCKCON_LCDON	 0x80	/* Enable LCD Controller */
-
-/* '328-compatible definitions */
-#define LCKCON_DW_MASK  LCKCON_DWS_MASK
-#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT
- 
-/*
- * LCD Refresh Rate Adjustment Register 
- */
-#define LRRA_ADDR	0xfffffa29
-#define LRRA		BYTE_REF(LRRA_ADDR)
-
-/*
- * LCD Panning Offset Register
- */
-#define LPOSR_ADDR	0xfffffa2d
-#define LPOSR		BYTE_REF(LPOSR_ADDR)
-
-#define LPOSR_POS_MASK	0x0f	/* Pixel Offset Code */
-#define LPOSR_POS_SHIFT	0
-
-/*
- * LCD Frame Rate Control Modulation Register
- */
-#define LFRCM_ADDR	0xfffffa31
-#define LFRCM		BYTE_REF(LFRCM_ADDR)
-
-#define LFRCM_YMOD_MASK	 0x0f	/* Vertical Modulation */
-#define LFRCM_YMOD_SHIFT 0
-#define LFRCM_XMOD_MASK	 0xf0	/* Horizontal Modulation */
-#define LFRCM_XMOD_SHIFT 4
-
-/*
- * LCD Gray Palette Mapping Register
- */
-#define LGPMR_ADDR	0xfffffa33
-#define LGPMR		BYTE_REF(LGPMR_ADDR)
-
-#define LGPMR_G1_MASK	0x0f
-#define LGPMR_G1_SHIFT	0
-#define LGPMR_G2_MASK	0xf0
-#define LGPMR_G2_SHIFT	4
-
-/* 
- * PWM Contrast Control Register
- */
-#define PWMR_ADDR	0xfffffa36
-#define PWMR		WORD_REF(PWMR_ADDR)
-
-#define PWMR_PW_MASK	0x00ff	/* Pulse Width */
-#define PWMR_PW_SHIFT	0
-#define PWMR_CCPEN	0x0100	/* Contrast Control Enable */
-#define PWMR_SRC_MASK	0x0600	/* Input Clock Source */
-#define   PWMR_SRC_LINE	  0x0000	/* Line Pulse  */
-#define   PWMR_SRC_PIXEL  0x0200	/* Pixel Clock */
-#define   PWMR_SRC_LCD    0x4000	/* LCD clock   */
-
-/**********
- *
- * 0xFFFFFBxx -- Real-Time Clock (RTC)
- *
- **********/
-
-/*
- * RTC Hours Minutes and Seconds Register
- */
-#define RTCTIME_ADDR	0xfffffb00
-#define RTCTIME		LONG_REF(RTCTIME_ADDR)
-
-#define RTCTIME_SECONDS_MASK	0x0000003f	/* Seconds */
-#define RTCTIME_SECONDS_SHIFT	0
-#define RTCTIME_MINUTES_MASK	0x003f0000	/* Minutes */
-#define RTCTIME_MINUTES_SHIFT	16
-#define RTCTIME_HOURS_MASK	0x1f000000	/* Hours */
-#define RTCTIME_HOURS_SHIFT	24
-
-/*
- *  RTC Alarm Register 
- */
-#define RTCALRM_ADDR    0xfffffb04
-#define RTCALRM         LONG_REF(RTCALRM_ADDR)
-
-#define RTCALRM_SECONDS_MASK    0x0000003f      /* Seconds */
-#define RTCALRM_SECONDS_SHIFT   0
-#define RTCALRM_MINUTES_MASK    0x003f0000      /* Minutes */
-#define RTCALRM_MINUTES_SHIFT   16
-#define RTCALRM_HOURS_MASK      0x1f000000      /* Hours */
-#define RTCALRM_HOURS_SHIFT     24
-
-/*
- * Watchdog Timer Register 
- */
-#define WATCHDOG_ADDR	0xfffffb0a
-#define WATCHDOG	WORD_REF(WATCHDOG_ADDR)
-
-#define WATCHDOG_EN	0x0001	/* Watchdog Enabled */
-#define WATCHDOG_ISEL	0x0002	/* Select the watchdog interrupt */
-#define WATCHDOG_INTF	0x0080	/* Watchdog interrupt occcured */
-#define WATCHDOG_CNT_MASK  0x0300	/* Watchdog Counter */
-#define WATCHDOG_CNT_SHIFT 8
-
-/*
- * RTC Control Register
- */
-#define RTCCTL_ADDR	0xfffffb0c
-#define RTCCTL		WORD_REF(RTCCTL_ADDR)
-
-#define RTCCTL_XTL	0x0020	/* Crystal Selection */
-#define RTCCTL_EN	0x0080	/* RTC Enable */
-
-/* '328-compatible definitions */
-#define RTCCTL_384	RTCCTL_XTL
-#define RTCCTL_ENABLE	RTCCTL_EN
-
-/*
- * RTC Interrupt Status Register 
- */
-#define RTCISR_ADDR	0xfffffb0e
-#define RTCISR		WORD_REF(RTCISR_ADDR)
-
-#define RTCISR_SW	0x0001	/* Stopwatch timed out */
-#define RTCISR_MIN	0x0002	/* 1-minute interrupt has occurred */
-#define RTCISR_ALM	0x0004	/* Alarm interrupt has occurred */
-#define RTCISR_DAY	0x0008	/* 24-hour rollover interrupt has occurred */
-#define RTCISR_1HZ	0x0010	/* 1Hz interrupt has occurred */
-#define RTCISR_HR	0x0020	/* 1-hour interrupt has occurred */
-#define RTCISR_SAM0	0x0100	/*   4Hz /   4.6875Hz interrupt has occurred */ 
-#define RTCISR_SAM1	0x0200	/*   8Hz /   9.3750Hz interrupt has occurred */ 
-#define RTCISR_SAM2	0x0400	/*  16Hz /  18.7500Hz interrupt has occurred */ 
-#define RTCISR_SAM3	0x0800	/*  32Hz /  37.5000Hz interrupt has occurred */ 
-#define RTCISR_SAM4	0x1000	/*  64Hz /  75.0000Hz interrupt has occurred */ 
-#define RTCISR_SAM5	0x2000	/* 128Hz / 150.0000Hz interrupt has occurred */ 
-#define RTCISR_SAM6	0x4000	/* 256Hz / 300.0000Hz interrupt has occurred */ 
-#define RTCISR_SAM7	0x8000	/* 512Hz / 600.0000Hz interrupt has occurred */ 
-
-/*
- * RTC Interrupt Enable Register
- */
-#define RTCIENR_ADDR	0xfffffb10
-#define RTCIENR		WORD_REF(RTCIENR_ADDR)
-
-#define RTCIENR_SW	0x0001	/* Stopwatch interrupt enable */
-#define RTCIENR_MIN	0x0002	/* 1-minute interrupt enable */
-#define RTCIENR_ALM	0x0004	/* Alarm interrupt enable */
-#define RTCIENR_DAY	0x0008	/* 24-hour rollover interrupt enable */
-#define RTCIENR_1HZ	0x0010	/* 1Hz interrupt enable */
-#define RTCIENR_HR	0x0020	/* 1-hour interrupt enable */
-#define RTCIENR_SAM0	0x0100	/*   4Hz /   4.6875Hz interrupt enable */ 
-#define RTCIENR_SAM1	0x0200	/*   8Hz /   9.3750Hz interrupt enable */ 
-#define RTCIENR_SAM2	0x0400	/*  16Hz /  18.7500Hz interrupt enable */ 
-#define RTCIENR_SAM3	0x0800	/*  32Hz /  37.5000Hz interrupt enable */ 
-#define RTCIENR_SAM4	0x1000	/*  64Hz /  75.0000Hz interrupt enable */ 
-#define RTCIENR_SAM5	0x2000	/* 128Hz / 150.0000Hz interrupt enable */ 
-#define RTCIENR_SAM6	0x4000	/* 256Hz / 300.0000Hz interrupt enable */ 
-#define RTCIENR_SAM7	0x8000	/* 512Hz / 600.0000Hz interrupt enable */ 
-
-/* 
- * Stopwatch Minutes Register
- */
-#define STPWCH_ADDR	0xfffffb12
-#define STPWCH		WORD_REF(STPWCH_ADDR)
-
-#define STPWCH_CNT_MASK	 0x003f	/* Stopwatch countdown value */
-#define SPTWCH_CNT_SHIFT 0
-
-/*
- * RTC Day Count Register 
- */
-#define DAYR_ADDR	0xfffffb1a
-#define DAYR		WORD_REF(DAYR_ADDR)
-
-#define DAYR_DAYS_MASK	0x1ff	/* Day Setting */
-#define DAYR_DAYS_SHIFT 0
-
-/*
- * RTC Day Alarm Register 
- */
-#define DAYALARM_ADDR	0xfffffb1c
-#define DAYALARM	WORD_REF(DAYALARM_ADDR)
-
-#define DAYALARM_DAYSAL_MASK	0x01ff	/* Day Setting of the Alarm */
-#define DAYALARM_DAYSAL_SHIFT 	0
-
-/**********
- *
- * 0xFFFFFCxx -- DRAM Controller
- *
- **********/
-
-/*
- * DRAM Memory Configuration Register 
- */
-#define DRAMMC_ADDR	0xfffffc00
-#define DRAMMC		WORD_REF(DRAMMC_ADDR)
-
-#define DRAMMC_ROW12_MASK	0xc000	/* Row address bit for MD12 */
-#define   DRAMMC_ROW12_PA10	0x0000
-#define   DRAMMC_ROW12_PA21	0x4000	
-#define   DRAMMC_ROW12_PA23	0x8000
-#define	DRAMMC_ROW0_MASK	0x3000	/* Row address bit for MD0 */
-#define	  DRAMMC_ROW0_PA11	0x0000
-#define   DRAMMC_ROW0_PA22	0x1000
-#define   DRAMMC_ROW0_PA23	0x2000
-#define DRAMMC_ROW11		0x0800	/* Row address bit for MD11 PA20/PA22 */
-#define DRAMMC_ROW10		0x0400	/* Row address bit for MD10 PA19/PA21 */
-#define	DRAMMC_ROW9		0x0200	/* Row address bit for MD9  PA9/PA19  */
-#define DRAMMC_ROW8		0x0100	/* Row address bit for MD8  PA10/PA20 */
-#define DRAMMC_COL10		0x0080	/* Col address bit for MD10 PA11/PA0  */
-#define DRAMMC_COL9		0x0040	/* Col address bit for MD9  PA10/PA0  */
-#define DRAMMC_COL8		0x0020	/* Col address bit for MD8  PA9/PA0   */
-#define DRAMMC_REF_MASK		0x001f	/* Reresh Cycle */
-#define DRAMMC_REF_SHIFT	0
-
-/*
- * DRAM Control Register
- */
-#define DRAMC_ADDR	0xfffffc02
-#define DRAMC		WORD_REF(DRAMC_ADDR)
-
-#define DRAMC_DWE	   0x0001	/* DRAM Write Enable */
-#define DRAMC_RST	   0x0002	/* Reset Burst Refresh Enable */
-#define DRAMC_LPR	   0x0004	/* Low-Power Refresh Enable */
-#define DRAMC_SLW	   0x0008	/* Slow RAM */
-#define DRAMC_LSP	   0x0010	/* Light Sleep */
-#define DRAMC_MSW	   0x0020	/* Slow Multiplexing */
-#define DRAMC_WS_MASK	   0x00c0	/* Wait-states */
-#define DRAMC_WS_SHIFT	   6
-#define DRAMC_PGSZ_MASK    0x0300	/* Page Size for fast page mode */
-#define DRAMC_PGSZ_SHIFT   8
-#define   DRAMC_PGSZ_256K  0x0000	
-#define   DRAMC_PGSZ_512K  0x0100
-#define   DRAMC_PGSZ_1024K 0x0200
-#define	  DRAMC_PGSZ_2048K 0x0300
-#define DRAMC_EDO	   0x0400	/* EDO DRAM */
-#define DRAMC_CLK	   0x0800	/* Refresh Timer Clock source select */
-#define DRAMC_BC_MASK	   0x3000	/* Page Access Clock Cycle (FP mode) */
-#define DRAMC_BC_SHIFT	   12
-#define DRAMC_RM	   0x4000	/* Refresh Mode */
-#define DRAMC_EN	   0x8000	/* DRAM Controller enable */
-
-
-/**********
- *
- * 0xFFFFFDxx -- In-Circuit Emulation (ICE)
- *
- **********/
-
-/*
- * ICE Module Address Compare Register
- */
-#define ICEMACR_ADDR	0xfffffd00
-#define ICEMACR		LONG_REF(ICEMACR_ADDR)
-
-/*
- * ICE Module Address Mask Register
- */
-#define ICEMAMR_ADDR	0xfffffd04
-#define ICEMAMR		LONG_REF(ICEMAMR_ADDR)
-
-/*
- * ICE Module Control Compare Register
- */
-#define ICEMCCR_ADDR	0xfffffd08
-#define ICEMCCR		WORD_REF(ICEMCCR_ADDR)
-
-#define ICEMCCR_PD	0x0001	/* Program/Data Cycle Selection */
-#define ICEMCCR_RW	0x0002	/* Read/Write Cycle Selection */
-
-/*
- * ICE Module Control Mask Register
- */
-#define ICEMCMR_ADDR	0xfffffd0a
-#define ICEMCMR		WORD_REF(ICEMCMR_ADDR)
-
-#define ICEMCMR_PDM	0x0001	/* Program/Data Cycle Mask */
-#define ICEMCMR_RWM	0x0002	/* Read/Write Cycle Mask */
-
-/*
- * ICE Module Control Register 
- */
-#define ICEMCR_ADDR	0xfffffd0c
-#define ICEMCR		WORD_REF(ICEMCR_ADDR)
-
-#define ICEMCR_CEN	0x0001	/* Compare Enable */
-#define ICEMCR_PBEN	0x0002	/* Program Break Enable */
-#define ICEMCR_SB	0x0004	/* Single Breakpoint */
-#define ICEMCR_HMDIS	0x0008	/* HardMap disable */
-#define ICEMCR_BBIEN	0x0010	/* Bus Break Interrupt Enable */
-
-/*
- * ICE Module Status Register 
- */
-#define ICEMSR_ADDR	0xfffffd0e
-#define ICEMSR		WORD_REF(ICEMSR_ADDR)
-
-#define ICEMSR_EMUEN	0x0001	/* Emulation Enable */
-#define ICEMSR_BRKIRQ	0x0002	/* A-Line Vector Fetch Detected */
-#define ICEMSR_BBIRQ	0x0004	/* Bus Break Interrupt Detected */
-#define ICEMSR_EMIRQ	0x0008	/* EMUIRQ Falling Edge Detected */
-
-#endif /* _MC68VZ328_H_ */
diff --git a/arch/m68knommu/include/asm/anchor.h b/arch/m68knommu/include/asm/anchor.h
deleted file mode 100644
index 871c0d5cfc3d..000000000000
--- a/arch/m68knommu/include/asm/anchor.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/****************************************************************************/
-
-/*
- *	anchor.h -- Anchor CO-MEM Lite PCI host bridge part.
- *
- *	(C) Copyright 2000, Moreton Bay (www.moreton.com.au)
- */
-
-/****************************************************************************/
-#ifndef	anchor_h
-#define	anchor_h
-/****************************************************************************/
-
-/*
- *	Define basic addressing info.
- */
-#if defined(CONFIG_M5407C3)
-#define	COMEM_BASE	0xFFFF0000	/* Base of CO-MEM address space */
-#define	COMEM_IRQ	25		/* IRQ of anchor part */
-#else
-#define	COMEM_BASE	0x80000000	/* Base of CO-MEM address space */
-#define	COMEM_IRQ	25		/* IRQ of anchor part */
-#endif
-
-/****************************************************************************/
-
-/*
- *	4-byte registers of CO-MEM, so adjust register addresses for
- *	easy access. Handy macro for word access too.
- */
-#define	LREG(a)		((a) >> 2)
-#define	WREG(a)		((a) >> 1)
-
-
-/*
- *	Define base addresses within CO-MEM Lite register address space.
- */
-#define	COMEM_I2O	0x0000		/* I2O registers */
-#define	COMEM_OPREGS	0x0400		/* Operation registers */
-#define	COMEM_PCIBUS	0x2000		/* Direct access to PCI bus */
-#define	COMEM_SHMEM	0x4000		/* Shared memory region */
-
-#define	COMEM_SHMEMSIZE	0x4000		/* Size of shared memory */
-
-
-/*
- *	Define CO-MEM Registers.
- */
-#define	COMEM_I2OHISR	0x0030		/* I2O host interrupt status */
-#define	COMEM_I2OHIMR	0x0034		/* I2O host interrupt mask */
-#define	COMEM_I2OLISR	0x0038		/* I2O local interrupt status */
-#define	COMEM_I2OLIMR	0x003c		/* I2O local interrupt mask */
-#define	COMEM_IBFPFIFO	0x0040		/* I2O inbound free/post FIFO */
-#define	COMEM_OBPFFIFO	0x0044		/* I2O outbound post/free FIFO */
-#define	COMEM_IBPFFIFO	0x0048		/* I2O inbound post/free FIFO */
-#define	COMEM_OBFPFIFO	0x004c		/* I2O outbound free/post FIFO */
-
-#define	COMEM_DAHBASE	0x0460		/* Direct access base address */
-
-#define	COMEM_NVCMD	0x04a0		/* I2C serial command */
-#define	COMEM_NVREAD	0x04a4		/* I2C serial read */
-#define	COMEM_NVSTAT	0x04a8		/* I2C status */
-
-#define	COMEM_DMALBASE	0x04b0		/* DMA local base address */
-#define	COMEM_DMAHBASE	0x04b4		/* DMA host base address */
-#define	COMEM_DMASIZE	0x04b8		/* DMA size */
-#define	COMEM_DMACTL	0x04bc		/* DMA control */
-
-#define	COMEM_HCTL	0x04e0		/* Host control */
-#define	COMEM_HINT	0x04e4		/* Host interrupt control/status */
-#define	COMEM_HLDATA	0x04e8		/* Host to local data mailbox */
-#define	COMEM_LINT	0x04f4		/* Local interrupt contole status */
-#define	COMEM_LHDATA	0x04f8		/* Local to host data mailbox */
-
-#define	COMEM_LBUSCFG	0x04fc		/* Local bus configuration */
-
-
-/*
- *	Commands and flags for use with Direct Access Register.
- */
-#define	COMEM_DA_IACK	0x00000000	/* Interrupt acknowledge (read) */
-#define	COMEM_DA_SPCL	0x00000010	/* Special cycle (write) */
-#define	COMEM_DA_MEMRD	0x00000004	/* Memory read cycle */
-#define	COMEM_DA_MEMWR	0x00000004	/* Memory write cycle */
-#define	COMEM_DA_IORD	0x00000002	/* I/O read cycle */
-#define	COMEM_DA_IOWR	0x00000002	/* I/O write cycle */
-#define	COMEM_DA_CFGRD	0x00000006	/* Configuration read cycle */
-#define	COMEM_DA_CFGWR	0x00000006	/* Configuration write cycle */
-
-#define	COMEM_DA_ADDR(a)	((a) & 0xffffe000)
-
-#define	COMEM_DA_OFFSET(a)	((a) & 0x00001fff)
-
-
-/*
- *	The PCI bus will be limited in what slots will actually be used.
- *	Define valid device numbers for different boards.
- */
-#if defined(CONFIG_M5407C3)
-#define	COMEM_MINDEV	14		/* Minimum valid DEVICE */
-#define	COMEM_MAXDEV	14		/* Maximum valid DEVICE */
-#define	COMEM_BRIDGEDEV	15		/* Slot bridge is in */
-#else
-#define	COMEM_MINDEV	0		/* Minimum valid DEVICE */
-#define	COMEM_MAXDEV	3		/* Maximum valid DEVICE */
-#endif
-
-#define	COMEM_MAXPCI	(COMEM_MAXDEV+1)	/* Maximum PCI devices */
-
-
-/****************************************************************************/
-#endif	/* anchor_h */
diff --git a/arch/m68knommu/include/asm/atomic.h b/arch/m68knommu/include/asm/atomic.h
deleted file mode 100644
index 6bb674855a3f..000000000000
--- a/arch/m68knommu/include/asm/atomic.h
+++ /dev/null
@@ -1,155 +0,0 @@
-#ifndef __ARCH_M68KNOMMU_ATOMIC__
-#define __ARCH_M68KNOMMU_ATOMIC__
-
-#include <linux/types.h>
-#include <asm/system.h>
-
-/*
- * Atomic operations that C can't guarantee us.  Useful for
- * resource counting etc..
- */
-
-/*
- * We do not have SMP m68k systems, so we don't have to deal with that.
- */
-
-#define ATOMIC_INIT(i)	{ (i) }
-
-#define atomic_read(v)		((v)->counter)
-#define atomic_set(v, i)	(((v)->counter) = i)
-
-static __inline__ void atomic_add(int i, atomic_t *v)
-{
-#ifdef CONFIG_COLDFIRE
-	__asm__ __volatile__("addl %1,%0" : "+m" (*v) : "d" (i));
-#else
-	__asm__ __volatile__("addl %1,%0" : "+m" (*v) : "di" (i));
-#endif
-}
-
-static __inline__ void atomic_sub(int i, atomic_t *v)
-{
-#ifdef CONFIG_COLDFIRE
-	__asm__ __volatile__("subl %1,%0" : "+m" (*v) : "d" (i));
-#else
-	__asm__ __volatile__("subl %1,%0" : "+m" (*v) : "di" (i));
-#endif
-}
-
-static __inline__ int atomic_sub_and_test(int i, atomic_t * v)
-{
-	char c;
-#ifdef CONFIG_COLDFIRE
-	__asm__ __volatile__("subl %2,%1; seq %0"
-			     : "=d" (c), "+m" (*v)
-			     : "d" (i));
-#else
-	__asm__ __volatile__("subl %2,%1; seq %0"
-			     : "=d" (c), "+m" (*v)
-			     : "di" (i));
-#endif
-	return c != 0;
-}
-
-static __inline__ void atomic_inc(volatile atomic_t *v)
-{
-	__asm__ __volatile__("addql #1,%0" : "+m" (*v));
-}
-
-/*
- * atomic_inc_and_test - increment and test
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-
-static __inline__ int atomic_inc_and_test(volatile atomic_t *v)
-{
-	char c;
-	__asm__ __volatile__("addql #1,%1; seq %0" : "=d" (c), "+m" (*v));
-	return c != 0;
-}
-
-static __inline__ void atomic_dec(volatile atomic_t *v)
-{
-	__asm__ __volatile__("subql #1,%0" : "+m" (*v));
-}
-
-static __inline__ int atomic_dec_and_test(volatile atomic_t *v)
-{
-	char c;
-	__asm__ __volatile__("subql #1,%1; seq %0" : "=d" (c), "+m" (*v));
-	return c != 0;
-}
-
-static __inline__ void atomic_clear_mask(unsigned long mask, unsigned long *v)
-{
-	__asm__ __volatile__("andl %1,%0" : "+m" (*v) : "id" (~(mask)));
-}
-
-static __inline__ void atomic_set_mask(unsigned long mask, unsigned long *v)
-{
-	__asm__ __volatile__("orl %1,%0" : "+m" (*v) : "id" (mask));
-}
-
-/* Atomic operations are already serializing */
-#define smp_mb__before_atomic_dec()    barrier()
-#define smp_mb__after_atomic_dec() barrier()
-#define smp_mb__before_atomic_inc()    barrier()
-#define smp_mb__after_atomic_inc() barrier()
-
-static inline int atomic_add_return(int i, atomic_t * v)
-{
-	unsigned long temp, flags;
-
-	local_irq_save(flags);
-	temp = *(long *)v;
-	temp += i;
-	*(long *)v = temp;
-	local_irq_restore(flags);
-
-	return temp;
-}
-
-#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
-
-static inline int atomic_sub_return(int i, atomic_t * v)
-{
-	unsigned long temp, flags;
-
-	local_irq_save(flags);
-	temp = *(long *)v;
-	temp -= i;
-	*(long *)v = temp;
-	local_irq_restore(flags);
-
-	return temp;
-}
-
-#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
-{
-	int c, old;
-	c = atomic_read(v);
-	for (;;) {
-		if (unlikely(c == (u)))
-			break;
-		old = atomic_cmpxchg((v), c, c + (a));
-		if (likely(old == c))
-			break;
-		c = old;
-	}
-	return c != (u);
-}
-
-#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-
-#define atomic_dec_return(v) atomic_sub_return(1,(v))
-#define atomic_inc_return(v) atomic_add_return(1,(v))
-
-#include <asm-generic/atomic.h>
-#endif /* __ARCH_M68KNOMMU_ATOMIC __ */
diff --git a/arch/m68knommu/include/asm/auxvec.h b/arch/m68knommu/include/asm/auxvec.h
deleted file mode 100644
index 844d6d52204b..000000000000
--- a/arch/m68knommu/include/asm/auxvec.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASMm68k_AUXVEC_H
-#define __ASMm68k_AUXVEC_H
-
-#endif
diff --git a/arch/m68knommu/include/asm/bitops.h b/arch/m68knommu/include/asm/bitops.h
deleted file mode 100644
index 9d3cbe5fad1e..000000000000
--- a/arch/m68knommu/include/asm/bitops.h
+++ /dev/null
@@ -1,337 +0,0 @@
-#ifndef _M68KNOMMU_BITOPS_H
-#define _M68KNOMMU_BITOPS_H
-
-/*
- * Copyright 1992, Linus Torvalds.
- */
-
-#include <linux/compiler.h>
-#include <asm/byteorder.h>	/* swab32 */
-
-#ifdef __KERNEL__
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-#if defined (__mcfisaaplus__) || defined (__mcfisac__)
-static inline int ffs(unsigned int val)
-{
-        if (!val)
-                return 0;
-
-        asm volatile(
-                        "bitrev %0\n\t"
-                        "ff1 %0\n\t"
-                        : "=d" (val)
-                        : "0" (val)
-		    );
-        val++;
-        return val;
-}
-
-static inline int __ffs(unsigned int val)
-{
-        asm volatile(
-                        "bitrev %0\n\t"
-                        "ff1 %0\n\t"
-                        : "=d" (val)
-                        : "0" (val)
-		    );
-        return val;
-}
-
-#else
-#include <asm-generic/bitops/ffs.h>
-#include <asm-generic/bitops/__ffs.h>
-#endif
-
-#include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/ffz.h>
-
-static __inline__ void set_bit(int nr, volatile unsigned long * addr)
-{
-#ifdef CONFIG_COLDFIRE
-	__asm__ __volatile__ ("lea %0,%%a0; bset %1,(%%a0)"
-	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
-	     : "d" (nr)
-	     : "%a0", "cc");
-#else
-	__asm__ __volatile__ ("bset %1,%0"
-	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
-	     : "di" (nr)
-	     : "cc");
-#endif
-}
-
-#define __set_bit(nr, addr) set_bit(nr, addr)
-
-/*
- * clear_bit() doesn't provide any barrier for the compiler.
- */
-#define smp_mb__before_clear_bit()	barrier()
-#define smp_mb__after_clear_bit()	barrier()
-
-static __inline__ void clear_bit(int nr, volatile unsigned long * addr)
-{
-#ifdef CONFIG_COLDFIRE
-	__asm__ __volatile__ ("lea %0,%%a0; bclr %1,(%%a0)"
-	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
-	     : "d" (nr)
-	     : "%a0", "cc");
-#else
-	__asm__ __volatile__ ("bclr %1,%0"
-	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
-	     : "di" (nr)
-	     : "cc");
-#endif
-}
-
-#define __clear_bit(nr, addr) clear_bit(nr, addr)
-
-static __inline__ void change_bit(int nr, volatile unsigned long * addr)
-{
-#ifdef CONFIG_COLDFIRE
-	__asm__ __volatile__ ("lea %0,%%a0; bchg %1,(%%a0)"
-	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
-	     : "d" (nr)
-	     : "%a0", "cc");
-#else
-	__asm__ __volatile__ ("bchg %1,%0"
-	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
-	     : "di" (nr)
-	     : "cc");
-#endif
-}
-
-#define __change_bit(nr, addr) change_bit(nr, addr)
-
-static __inline__ int test_and_set_bit(int nr, volatile unsigned long * addr)
-{
-	char retval;
-
-#ifdef CONFIG_COLDFIRE
-	__asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0"
-	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
-	     : "d" (nr)
-	     : "%a0");
-#else
-	__asm__ __volatile__ ("bset %2,%1; sne %0"
-	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
-	     : "di" (nr)
-	     /* No clobber */);
-#endif
-
-	return retval;
-}
-
-#define __test_and_set_bit(nr, addr) test_and_set_bit(nr, addr)
-
-static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * addr)
-{
-	char retval;
-
-#ifdef CONFIG_COLDFIRE
-	__asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0"
-	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
-	     : "d" (nr)
-	     : "%a0");
-#else
-	__asm__ __volatile__ ("bclr %2,%1; sne %0"
-	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
-	     : "di" (nr)
-	     /* No clobber */);
-#endif
-
-	return retval;
-}
-
-#define __test_and_clear_bit(nr, addr) test_and_clear_bit(nr, addr)
-
-static __inline__ int test_and_change_bit(int nr, volatile unsigned long * addr)
-{
-	char retval;
-
-#ifdef CONFIG_COLDFIRE
-	__asm__ __volatile__ ("lea %1,%%a0\n\tbchg %2,(%%a0)\n\tsne %0"
-	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
-	     : "d" (nr)
-	     : "%a0");
-#else
-	__asm__ __volatile__ ("bchg %2,%1; sne %0"
-	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
-	     : "di" (nr)
-	     /* No clobber */);
-#endif
-
-	return retval;
-}
-
-#define __test_and_change_bit(nr, addr) test_and_change_bit(nr, addr)
-
-/*
- * This routine doesn't need to be atomic.
- */
-static __inline__ int __constant_test_bit(int nr, const volatile unsigned long * addr)
-{
-	return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
-}
-
-static __inline__ int __test_bit(int nr, const volatile unsigned long * addr)
-{
-	int 	* a = (int *) addr;
-	int	mask;
-
-	a += nr >> 5;
-	mask = 1 << (nr & 0x1f);
-	return ((mask & *a) != 0);
-}
-
-#define test_bit(nr,addr) \
-(__builtin_constant_p(nr) ? \
- __constant_test_bit((nr),(addr)) : \
- __test_bit((nr),(addr)))
-
-#include <asm-generic/bitops/find.h>
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
-
-static __inline__ int ext2_set_bit(int nr, volatile void * addr)
-{
-	char retval;
-
-#ifdef CONFIG_COLDFIRE
-	__asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0"
-	     : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
-	     : "d" (nr)
-	     : "%a0");
-#else
-	__asm__ __volatile__ ("bset %2,%1; sne %0"
-	     : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
-	     : "di" (nr)
-	     /* No clobber */);
-#endif
-
-	return retval;
-}
-
-static __inline__ int ext2_clear_bit(int nr, volatile void * addr)
-{
-	char retval;
-
-#ifdef CONFIG_COLDFIRE
-	__asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0"
-	     : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
-	     : "d" (nr)
-	     : "%a0");
-#else
-	__asm__ __volatile__ ("bclr %2,%1; sne %0"
-	     : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
-	     : "di" (nr)
-	     /* No clobber */);
-#endif
-
-	return retval;
-}
-
-#define ext2_set_bit_atomic(lock, nr, addr)		\
-	({						\
-		int ret;				\
-		spin_lock(lock);			\
-		ret = ext2_set_bit((nr), (addr));	\
-		spin_unlock(lock);			\
-		ret;					\
-	})
-
-#define ext2_clear_bit_atomic(lock, nr, addr)		\
-	({						\
-		int ret;				\
-		spin_lock(lock);			\
-		ret = ext2_clear_bit((nr), (addr));	\
-		spin_unlock(lock);			\
-		ret;					\
-	})
-
-static __inline__ int ext2_test_bit(int nr, const volatile void * addr)
-{
-	char retval;
-
-#ifdef CONFIG_COLDFIRE
-	__asm__ __volatile__ ("lea %1,%%a0; btst %2,(%%a0); sne %0"
-	     : "=d" (retval)
-	     : "m" (((const volatile char *)addr)[nr >> 3]), "d" (nr)
-	     : "%a0");
-#else
-	__asm__ __volatile__ ("btst %2,%1; sne %0"
-	     : "=d" (retval)
-	     : "m" (((const volatile char *)addr)[nr >> 3]), "di" (nr)
-	     /* No clobber */);
-#endif
-
-	return retval;
-}
-
-#define ext2_find_first_zero_bit(addr, size) \
-        ext2_find_next_zero_bit((addr), (size), 0)
-
-static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset)
-{
-	unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
-	unsigned long result = offset & ~31UL;
-	unsigned long tmp;
-
-	if (offset >= size)
-		return size;
-	size -= result;
-	offset &= 31UL;
-	if(offset) {
-		/* We hold the little endian value in tmp, but then the
-		 * shift is illegal. So we could keep a big endian value
-		 * in tmp, like this:
-		 *
-		 * tmp = __swab32(*(p++));
-		 * tmp |= ~0UL >> (32-offset);
-		 *
-		 * but this would decrease performance, so we change the
-		 * shift:
-		 */
-		tmp = *(p++);
-		tmp |= __swab32(~0UL >> (32-offset));
-		if(size < 32)
-			goto found_first;
-		if(~tmp)
-			goto found_middle;
-		size -= 32;
-		result += 32;
-	}
-	while(size & ~31UL) {
-		if(~(tmp = *(p++)))
-			goto found_middle;
-		result += 32;
-		size -= 32;
-	}
-	if(!size)
-		return result;
-	tmp = *p;
-
-found_first:
-	/* tmp is little endian, so we would have to swab the shift,
-	 * see above. But then we have to swab tmp below for ffz, so
-	 * we might as well do this here.
-	 */
-	return result + ffz(__swab32(tmp) | (~0UL << size));
-found_middle:
-	return result + ffz(__swab32(tmp));
-}
-
-#define ext2_find_next_bit(addr, size, off) \
-	generic_find_next_le_bit((unsigned long *)(addr), (size), (off))
-#include <asm-generic/bitops/minix.h>
-
-#endif /* __KERNEL__ */
-
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/__fls.h>
-#include <asm-generic/bitops/fls64.h>
-
-#endif /* _M68KNOMMU_BITOPS_H */
diff --git a/arch/m68knommu/include/asm/bootinfo.h b/arch/m68knommu/include/asm/bootinfo.h
deleted file mode 100644
index c12e526f5189..000000000000
--- a/arch/m68knommu/include/asm/bootinfo.h
+++ /dev/null
@@ -1,2 +0,0 @@
-
-/* Nothing for m68knommu */
diff --git a/arch/m68knommu/include/asm/bootstd.h b/arch/m68knommu/include/asm/bootstd.h
deleted file mode 100644
index bdc1a4ac4fe9..000000000000
--- a/arch/m68knommu/include/asm/bootstd.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/* bootstd.h:  Bootloader system call interface
- *
- * (c) 1999, Rt-Control, Inc.
- */
-
-#ifndef __BOOTSTD_H__
-#define __BOOTSTD_H__
-
-#define NR_BSC 21            /* last used bootloader system call */
-
-#define __BN_reset        0  /* reset and start the bootloader */
-#define __BN_test         1  /* tests the system call interface */
-#define __BN_exec         2  /* executes a bootloader image */
-#define __BN_exit         3  /* terminates a bootloader image */
-#define __BN_program      4  /* program FLASH from a chain */
-#define __BN_erase        5  /* erase sector(s) of FLASH */
-#define __BN_open         6
-#define __BN_write        7
-#define __BN_read         8
-#define __BN_close        9
-#define __BN_mmap         10 /* map a file descriptor into memory */
-#define __BN_munmap       11 /* remove a file to memory mapping */
-#define __BN_gethwaddr    12 /* get the hardware address of my interfaces */
-#define __BN_getserialnum 13 /* get the serial number of this board */
-#define __BN_getbenv      14 /* get a bootloader envvar */
-#define __BN_setbenv      15 /* get a bootloader envvar */
-#define __BN_setpmask     16 /* set the protection mask */
-#define __BN_readenv      17 /* read environment variables */
-#define __BN_flash_chattr_range		18
-#define __BN_flash_erase_range		19
-#define __BN_flash_write_range		20
-
-/* Calling conventions compatible to (uC)linux/68k
- * We use simmilar macros to call into the bootloader as for uClinux
- */
-
-#define __bsc_return(type, res) \
-do { \
-   if ((unsigned long)(res) >= (unsigned long)(-64)) { \
-      /* let errno be a function, preserve res in %d0 */ \
-      int __err = -(res); \
-      errno = __err; \
-      res = -1; \
-   } \
-   return (type)(res); \
-} while (0)
-
-#define _bsc0(type,name) \
-type name(void) \
-{ \
-   register long __res __asm__ ("%d0") = __BN_##name; \
-   __asm__ __volatile__ ("trap #2" \
-                         : "=g" (__res) \
-                         : "0" (__res) \
-                         ); \
-   __bsc_return(type,__res); \
-}
-
-#define _bsc1(type,name,atype,a) \
-type name(atype a) \
-{ \
-   register long __res __asm__ ("%d0") = __BN_##name; \
-   register long __a __asm__ ("%d1") = (long)a; \
-   __asm__ __volatile__ ("trap #2" \
-                         : "=g" (__res) \
-                         : "0" (__res), "d" (__a) \
-                         ); \
-   __bsc_return(type,__res); \
-}
-
-#define _bsc2(type,name,atype,a,btype,b) \
-type name(atype a, btype b) \
-{ \
-   register long __res __asm__ ("%d0") = __BN_##name; \
-   register long __a __asm__ ("%d1") = (long)a; \
-   register long __b __asm__ ("%d2") = (long)b; \
-   __asm__ __volatile__ ("trap #2" \
-                         : "=g" (__res) \
-                         : "0" (__res), "d" (__a), "d" (__b) \
-                         ); \
-   __bsc_return(type,__res); \
-}
-
-#define _bsc3(type,name,atype,a,btype,b,ctype,c) \
-type name(atype a, btype b, ctype c) \
-{ \
-   register long __res __asm__ ("%d0") = __BN_##name; \
-   register long __a __asm__ ("%d1") = (long)a; \
-   register long __b __asm__ ("%d2") = (long)b; \
-   register long __c __asm__ ("%d3") = (long)c; \
-   __asm__ __volatile__ ("trap #2" \
-                         : "=g" (__res) \
-                         : "0" (__res), "d" (__a), "d" (__b), \
-                           "d" (__c) \
-                         ); \
-   __bsc_return(type,__res); \
-}
-
-#define _bsc4(type,name,atype,a,btype,b,ctype,c,dtype,d) \
-type name(atype a, btype b, ctype c, dtype d) \
-{ \
-   register long __res __asm__ ("%d0") = __BN_##name; \
-   register long __a __asm__ ("%d1") = (long)a; \
-   register long __b __asm__ ("%d2") = (long)b; \
-   register long __c __asm__ ("%d3") = (long)c; \
-   register long __d __asm__ ("%d4") = (long)d; \
-   __asm__ __volatile__ ("trap #2" \
-                         : "=g" (__res) \
-                         : "0" (__res), "d" (__a), "d" (__b), \
-                           "d" (__c), "d" (__d) \
-                         ); \
-   __bsc_return(type,__res); \
-}
-
-#define _bsc5(type,name,atype,a,btype,b,ctype,c,dtype,d,etype,e) \
-type name(atype a, btype b, ctype c, dtype d, etype e) \
-{ \
-   register long __res __asm__ ("%d0") = __BN_##name; \
-   register long __a __asm__ ("%d1") = (long)a; \
-   register long __b __asm__ ("%d2") = (long)b; \
-   register long __c __asm__ ("%d3") = (long)c; \
-   register long __d __asm__ ("%d4") = (long)d; \
-   register long __e __asm__ ("%d5") = (long)e; \
-   __asm__ __volatile__ ("trap #2" \
-                         : "=g" (__res) \
-                         : "0" (__res), "d" (__a), "d" (__b), \
-                           "d" (__c), "d" (__d), "d" (__e) \
-                         ); \
-   __bsc_return(type,__res); \
-}
-
-#endif /* __BOOTSTD_H__ */
diff --git a/arch/m68knommu/include/asm/bug.h b/arch/m68knommu/include/asm/bug.h
deleted file mode 100644
index 70e7dc0af21a..000000000000
--- a/arch/m68knommu/include/asm/bug.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef _M68KNOMMU_BUG_H
-#define _M68KNOMMU_BUG_H
-#include <asm-generic/bug.h>
-#endif
diff --git a/arch/m68knommu/include/asm/bugs.h b/arch/m68knommu/include/asm/bugs.h
deleted file mode 100644
index 5f382dac3a60..000000000000
--- a/arch/m68knommu/include/asm/bugs.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- *  include/asm-m68k/bugs.h
- *
- *  Copyright (C) 1994  Linus Torvalds
- */
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- *	void check_bugs(void);
- */
-
-static void check_bugs(void)
-{
-}
diff --git a/arch/m68knommu/include/asm/byteorder.h b/arch/m68knommu/include/asm/byteorder.h
deleted file mode 100644
index 9c6c76a15041..000000000000
--- a/arch/m68knommu/include/asm/byteorder.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _M68KNOMMU_BYTEORDER_H
-#define _M68KNOMMU_BYTEORDER_H
-
-#include <linux/byteorder/big_endian.h>
-
-#endif /* _M68KNOMMU_BYTEORDER_H */
diff --git a/arch/m68knommu/include/asm/cache.h b/arch/m68knommu/include/asm/cache.h
deleted file mode 100644
index 24e9eace5f8c..000000000000
--- a/arch/m68knommu/include/asm/cache.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef __ARCH_M68KNOMMU_CACHE_H
-#define __ARCH_M68KNOMMU_CACHE_H
-
-/* bytes per L1 cache line */
-#define        L1_CACHE_BYTES  16	/* this need to be at least 1 */
-
-/* m68k-elf-gcc  2.95.2 doesn't like these */
-
-#define __cacheline_aligned
-#define ____cacheline_aligned
-
-#endif
diff --git a/arch/m68knommu/include/asm/cachectl.h b/arch/m68knommu/include/asm/cachectl.h
deleted file mode 100644
index bcf5a6a9dd52..000000000000
--- a/arch/m68knommu/include/asm/cachectl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/cachectl.h>
diff --git a/arch/m68knommu/include/asm/cacheflush.h b/arch/m68knommu/include/asm/cacheflush.h
deleted file mode 100644
index 87e5dc0413b4..000000000000
--- a/arch/m68knommu/include/asm/cacheflush.h
+++ /dev/null
@@ -1,84 +0,0 @@
-#ifndef _M68KNOMMU_CACHEFLUSH_H
-#define _M68KNOMMU_CACHEFLUSH_H
-
-/*
- * (C) Copyright 2000-2004, Greg Ungerer <gerg@snapgear.com>
- */
-#include <linux/mm.h>
-
-#define flush_cache_all()			__flush_cache_all()
-#define flush_cache_mm(mm)			do { } while (0)
-#define flush_cache_dup_mm(mm)			do { } while (0)
-#define flush_cache_range(vma, start, end)	__flush_cache_all()
-#define flush_cache_page(vma, vmaddr)		do { } while (0)
-#define flush_dcache_range(start,len)		__flush_cache_all()
-#define flush_dcache_page(page)			do { } while (0)
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-#define flush_icache_range(start,len)		__flush_cache_all()
-#define flush_icache_page(vma,pg)		do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
-#define flush_cache_vmap(start, end)		do { } while (0)
-#define flush_cache_vunmap(start, end)		do { } while (0)
-
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
-	memcpy(dst, src, len)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
-	memcpy(dst, src, len)
-
-static inline void __flush_cache_all(void)
-{
-#ifdef CONFIG_M5407
-	/*
-	 *	Use cpushl to push and invalidate all cache lines.
-	 *	Gas doesn't seem to know how to generate the ColdFire
-	 *	cpushl instruction... Oh well, bit stuff it for now.
-	 */
-	__asm__ __volatile__ (
-		"nop\n\t"
-		"clrl	%%d0\n\t"
-		"1:\n\t"
-		"movel	%%d0,%%a0\n\t"
-		"2:\n\t"
-		".word	0xf468\n\t"
-		"addl	#0x10,%%a0\n\t"
-		"cmpl	#0x00000800,%%a0\n\t"
-		"blt	2b\n\t"
-		"addql	#1,%%d0\n\t"
-		"cmpil	#4,%%d0\n\t"
-		"bne	1b\n\t"
-		"movel	#0xb6088500,%%d0\n\t"
-		"movec	%%d0,%%CACR\n\t"
-		: : : "d0", "a0" );
-#endif /* CONFIG_M5407 */
-#if defined(CONFIG_M527x) || defined(CONFIG_M528x)
-	__asm__ __volatile__ (
-		"movel	#0x81000200, %%d0\n\t"
-		"movec	%%d0, %%CACR\n\t"
-		"nop\n\t"
-		: : : "d0" );
-#endif /* CONFIG_M527x || CONFIG_M528x */
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272)
-	__asm__ __volatile__ (
-		"movel	#0x81000100, %%d0\n\t"
-		"movec	%%d0, %%CACR\n\t"
-		"nop\n\t"
-		: : : "d0" );
-#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */
-#ifdef CONFIG_M5249
-	__asm__ __volatile__ (
-		"movel	#0xa1000200, %%d0\n\t"
-		"movec	%%d0, %%CACR\n\t"
-		"nop\n\t"
-		: : : "d0" );
-#endif /* CONFIG_M5249 */
-#ifdef CONFIG_M532x
-	__asm__ __volatile__ (
-		"movel	#0x81000200, %%d0\n\t"
-		"movec	%%d0, %%CACR\n\t"
-		"nop\n\t"
-		: : : "d0" );
-#endif /* CONFIG_M532x */
-}
-
-#endif /* _M68KNOMMU_CACHEFLUSH_H */
diff --git a/arch/m68knommu/include/asm/checksum.h b/arch/m68knommu/include/asm/checksum.h
deleted file mode 100644
index 81883482ffb1..000000000000
--- a/arch/m68knommu/include/asm/checksum.h
+++ /dev/null
@@ -1,132 +0,0 @@
-#ifndef _M68K_CHECKSUM_H
-#define _M68K_CHECKSUM_H
-
-#include <linux/in6.h>
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-__wsum csum_partial_copy_nocheck(const void *src, void *dst,
-	int len, __wsum sum);
-
-
-/*
- * the same as csum_partial_copy, but copies from user space.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-extern __wsum csum_partial_copy_from_user(const void __user *src,
-	void *dst, int len, __wsum sum, int *csum_err);
-
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-/*
- *	Fold a partial checksum
- */
-
-static inline __sum16 csum_fold(__wsum sum)
-{
-	unsigned int tmp = (__force u32)sum;
-#ifdef CONFIG_COLDFIRE
-	tmp = (tmp & 0xffff) + (tmp >> 16);
-	tmp = (tmp & 0xffff) + (tmp >> 16);
-	return (__force __sum16)~tmp;
-#else
-	__asm__("swap %1\n\t"
-		"addw %1, %0\n\t"
-		"clrw %1\n\t"
-		"addxw %1, %0"
-		: "=&d" (sum), "=&d" (tmp)
-		: "0" (sum), "1" (sum));
-	return (__force __sum16)~sum;
-#endif
-}
-
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-
-static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
-		  unsigned short proto, __wsum sum)
-{
-	__asm__ ("addl  %1,%0\n\t"
-		 "addxl %4,%0\n\t"
-		 "addxl %5,%0\n\t"
-		 "clrl %1\n\t"
-		 "addxl %1,%0"
-		 : "=&d" (sum), "=&d" (saddr)
-		 : "0" (daddr), "1" (saddr), "d" (len + proto),
-		   "d"(sum));
-	return sum;
-}
-
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
-		  unsigned short proto, __wsum sum)
-{
-	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-
-extern __sum16 ip_compute_csum(const void *buff, int len);
-
-#define _HAVE_ARCH_IPV6_CSUM
-static __inline__ __sum16
-csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
-		__u32 len, unsigned short proto, __wsum sum)
-{
-	register unsigned long tmp;
-	__asm__("addl %2@,%0\n\t"
-		"movel %2@(4),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %2@(8),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %2@(12),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %3@,%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %3@(4),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %3@(8),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %3@(12),%1\n\t"
-		"addxl %1,%0\n\t"
-		"addxl %4,%0\n\t"
-		"clrl %1\n\t"
-		"addxl %1,%0"
-		: "=&d" (sum), "=&d" (tmp)
-		: "a" (saddr), "a" (daddr), "d" (len + proto),
-		  "0" (sum));
-
-	return csum_fold(sum);
-}
-
-#endif /* _M68K_CHECKSUM_H */
diff --git a/arch/m68knommu/include/asm/coldfire.h b/arch/m68knommu/include/asm/coldfire.h
deleted file mode 100644
index 83a9fa4e618a..000000000000
--- a/arch/m68knommu/include/asm/coldfire.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/****************************************************************************/
-
-/*
- *	coldfire.h -- Motorola ColdFire CPU sepecific defines
- *
- *	(C) Copyright 1999-2006, Greg Ungerer (gerg@snapgear.com)
- *	(C) Copyright 2000, Lineo (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef	coldfire_h
-#define	coldfire_h
-/****************************************************************************/
-
-
-/*
- *	Define master clock frequency. This is essentially done at config
- *	time now. No point enumerating dozens of possible clock options
- *	here. Also the peripheral clock (bus clock) divide ratio is set
- *	at config time too.
- */
-#ifdef CONFIG_CLOCK_SET
-#define	MCF_CLK		CONFIG_CLOCK_FREQ
-#define	MCF_BUSCLK	(CONFIG_CLOCK_FREQ / CONFIG_CLOCK_DIV)
-#else
-#error "Don't know what your ColdFire CPU clock frequency is??"
-#endif
-
-/*
- *	Define the processor support peripherals base address.
- *	This is generally setup by the boards start up code.
- */
-#define	MCF_MBAR	0x10000000
-#define	MCF_MBAR2	0x80000000
-#if defined(CONFIG_M520x)
-#define	MCF_IPSBAR	0xFC000000
-#else
-#define	MCF_IPSBAR	0x40000000
-#endif
-
-#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
-    defined(CONFIG_M520x)
-#undef MCF_MBAR
-#define	MCF_MBAR	MCF_IPSBAR
-#elif defined(CONFIG_M532x)
-#undef MCF_MBAR
-#define MCF_MBAR	0x00000000
-#endif
-
-/****************************************************************************/
-#endif	/* coldfire_h */
diff --git a/arch/m68knommu/include/asm/commproc.h b/arch/m68knommu/include/asm/commproc.h
deleted file mode 100644
index edf5eb6c08d2..000000000000
--- a/arch/m68knommu/include/asm/commproc.h
+++ /dev/null
@@ -1,703 +0,0 @@
-
-/*
- * 68360 Communication Processor Module.
- * Copyright (c) 2000 Michael Leslie <mleslie@lineo.com> (mc68360) after:
- * Copyright (c) 1997 Dan Malek <dmalek@jlc.net> (mpc8xx)
- *
- * This file contains structures and information for the communication
- * processor channels.  Some CPM control and status is available
- * through the 68360 internal memory map.  See include/asm/360_immap.h for details.
- * This file is not a complete map of all of the 360 QUICC's capabilities
- *
- * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
- * bytes of the DP RAM and relocates the I2C parameter area to the
- * IDMA1 space.  The remaining DP RAM is available for buffer descriptors
- * or other use.
- */
-#ifndef __CPM_360__
-#define __CPM_360__
-
-
-/* CPM Command register masks: */
-#define CPM_CR_RST	((ushort)0x8000)
-#define CPM_CR_OPCODE	((ushort)0x0f00)
-#define CPM_CR_CHAN	((ushort)0x00f0)
-#define CPM_CR_FLG	((ushort)0x0001)
-
-/* CPM Command set (opcodes): */
-#define CPM_CR_INIT_TRX		((ushort)0x0000)
-#define CPM_CR_INIT_RX		((ushort)0x0001)
-#define CPM_CR_INIT_TX		((ushort)0x0002)
-#define CPM_CR_HUNT_MODE	((ushort)0x0003)
-#define CPM_CR_STOP_TX		((ushort)0x0004)
-#define CPM_CR_GRSTOP_TX	((ushort)0x0005)
-#define CPM_CR_RESTART_TX	((ushort)0x0006)
-#define CPM_CR_CLOSE_RXBD	((ushort)0x0007)
-#define CPM_CR_SET_GADDR	((ushort)0x0008)
-#define CPM_CR_GCI_TIMEOUT	((ushort)0x0009)
-#define CPM_CR_GCI_ABORT	((ushort)0x000a)
-#define CPM_CR_RESET_BCS	((ushort)0x000a)
-
-/* CPM Channel numbers. */
-#define CPM_CR_CH_SCC1	((ushort)0x0000)
-#define CPM_CR_CH_SCC2	((ushort)0x0004)
-#define CPM_CR_CH_SPI	((ushort)0x0005)	/* SPI / Timers */
-#define CPM_CR_CH_TMR	((ushort)0x0005)
-#define CPM_CR_CH_SCC3	((ushort)0x0008)
-#define CPM_CR_CH_SMC1	((ushort)0x0009)	/* SMC1 / IDMA1 */
-#define CPM_CR_CH_IDMA1	((ushort)0x0009)
-#define CPM_CR_CH_SCC4	((ushort)0x000c)
-#define CPM_CR_CH_SMC2	((ushort)0x000d)	/* SMC2 / IDMA2 */
-#define CPM_CR_CH_IDMA2	((ushort)0x000d)
-
-
-#define mk_cr_cmd(CH, CMD)	((CMD << 8) | (CH << 4))
-
-#if 1 /* mleslie: I dinna think we have any such restrictions on
-       * DP RAM aboard the 360 board - see the MC68360UM p.3-3 */
-
-/* The dual ported RAM is multi-functional.  Some areas can be (and are
- * being) used for microcode.  There is an area that can only be used
- * as data ram for buffer descriptors, which is all we use right now.
- * Currently the first 512 and last 256 bytes are used for microcode.
- */
-/* mleslie: The uCquicc board is using no extra microcode in DPRAM */
-#define CPM_DATAONLY_BASE	((uint)0x0000)
-#define CPM_DATAONLY_SIZE	((uint)0x0800)
-#define CPM_DP_NOSPACE		((uint)0x7fffffff)
-
-#endif
-
-
-/* Export the base address of the communication processor registers
- * and dual port ram. */
-/* extern	cpm360_t	*cpmp; */		/* Pointer to comm processor */
-extern QUICC *pquicc;
-uint         m360_cpm_dpalloc(uint size);
-/* void         *m360_cpm_hostalloc(uint size); */
-void	      m360_cpm_setbrg(uint brg, uint rate);
-
-#if 0 /* use QUICC_BD declared in include/asm/m68360_quicc.h  */
-/* Buffer descriptors used by many of the CPM protocols. */
-typedef struct cpm_buf_desc {
-	ushort	cbd_sc;		/* Status and Control */
-	ushort	cbd_datlen;	/* Data length in buffer */
-	uint	cbd_bufaddr;	/* Buffer address in host memory */
-} cbd_t;
-#endif
-
-
-/* rx bd status/control bits */
-#define BD_SC_EMPTY	((ushort)0x8000)	/* Recieve is empty */
-#define BD_SC_WRAP	((ushort)0x2000)	/* Last buffer descriptor in table */
-#define BD_SC_INTRPT	((ushort)0x1000)	/* Interrupt on change */
-#define BD_SC_LAST	((ushort)0x0800)	/* Last buffer in frame OR control char */
-
-#define BD_SC_FIRST	((ushort)0x0400)	/* 1st buffer in an HDLC frame */
-#define BD_SC_ADDR	((ushort)0x0400)	/* 1st byte is a multidrop address */
-
-#define BD_SC_CM	((ushort)0x0200)	/* Continous mode */
-#define BD_SC_ID	((ushort)0x0100)	/* Received too many idles */
-
-#define BD_SC_AM	((ushort)0x0080)	/* Multidrop address match */
-#define BD_SC_DE	((ushort)0x0080)	/* DPLL Error (HDLC) */
-
-#define BD_SC_BR	((ushort)0x0020)	/* Break received */
-#define BD_SC_LG	((ushort)0x0020)	/* Frame length violation (HDLC) */
-
-#define BD_SC_FR	((ushort)0x0010)	/* Framing error */
-#define BD_SC_NO	((ushort)0x0010)	/* Nonoctet aligned frame (HDLC) */
-
-#define BD_SC_PR	((ushort)0x0008)	/* Parity error */
-#define BD_SC_AB	((ushort)0x0008)	/* Received abort Sequence (HDLC) */
-
-#define BD_SC_OV	((ushort)0x0002)	/* Overrun */
-#define BD_SC_CD	((ushort)0x0001)	/* Carrier Detect lost */
-
-/* tx bd status/control bits (as differ from rx bd) */
-#define BD_SC_READY	((ushort)0x8000)	/* Transmit is ready */
-#define BD_SC_TC	((ushort)0x0400)	/* Transmit CRC */
-#define BD_SC_P		((ushort)0x0100)	/* xmt preamble */
-#define BD_SC_UN	((ushort)0x0002)	/* Underrun */
-
-
-
-
-/* Parameter RAM offsets. */
-
-
-
-/* In 2.4 ppc, the PROFF_S?C? are used as byte offsets into DPRAM.
- * In 2.0, we use a more structured C struct map of DPRAM, and so 
- * instead, we need only a parameter ram `slot'  */
-
-#define PRSLOT_SCC1	0
-#define PRSLOT_SCC2	1
-#define PRSLOT_SCC3	2
-#define PRSLOT_SMC1	2
-#define PRSLOT_SCC4	3
-#define PRSLOT_SMC2	3
-
-
-/* #define PROFF_SCC1	((uint)0x0000) */
-/* #define PROFF_SCC2	((uint)0x0100) */
-/* #define PROFF_SCC3	((uint)0x0200) */
-/* #define PROFF_SMC1	((uint)0x0280) */
-/* #define PROFF_SCC4	((uint)0x0300) */
-/* #define PROFF_SMC2	((uint)0x0380) */
-
-
-/* Define enough so I can at least use the serial port as a UART.
- * The MBX uses SMC1 as the host serial port.
- */
-typedef struct smc_uart {
-	ushort	smc_rbase;	/* Rx Buffer descriptor base address */
-	ushort	smc_tbase;	/* Tx Buffer descriptor base address */
-	u_char	smc_rfcr;	/* Rx function code */
-	u_char	smc_tfcr;	/* Tx function code */
-	ushort	smc_mrblr;	/* Max receive buffer length */
-	uint	smc_rstate;	/* Internal */
-	uint	smc_idp;	/* Internal */
-	ushort	smc_rbptr;	/* Internal */
-	ushort	smc_ibc;	/* Internal */
-	uint	smc_rxtmp;	/* Internal */
-	uint	smc_tstate;	/* Internal */
-	uint	smc_tdp;	/* Internal */
-	ushort	smc_tbptr;	/* Internal */
-	ushort	smc_tbc;	/* Internal */
-	uint	smc_txtmp;	/* Internal */
-	ushort	smc_maxidl;	/* Maximum idle characters */
-	ushort	smc_tmpidl;	/* Temporary idle counter */
-	ushort	smc_brklen;	/* Last received break length */
-	ushort	smc_brkec;	/* rcv'd break condition counter */
-	ushort	smc_brkcr;	/* xmt break count register */
-	ushort	smc_rmask;	/* Temporary bit mask */
-} smc_uart_t;
-
-/* Function code bits.
-*/
-#define SMC_EB	((u_char)0x10)	/* Set big endian byte order */
-
-/* SMC uart mode register.
-*/
-#define	SMCMR_REN	((ushort)0x0001)
-#define SMCMR_TEN	((ushort)0x0002)
-#define SMCMR_DM	((ushort)0x000c)
-#define SMCMR_SM_GCI	((ushort)0x0000)
-#define SMCMR_SM_UART	((ushort)0x0020)
-#define SMCMR_SM_TRANS	((ushort)0x0030)
-#define SMCMR_SM_MASK	((ushort)0x0030)
-#define SMCMR_PM_EVEN	((ushort)0x0100)	/* Even parity, else odd */
-#define SMCMR_REVD	SMCMR_PM_EVEN
-#define SMCMR_PEN	((ushort)0x0200)	/* Parity enable */
-#define SMCMR_BS	SMCMR_PEN
-#define SMCMR_SL	((ushort)0x0400)	/* Two stops, else one */
-#define SMCR_CLEN_MASK	((ushort)0x7800)	/* Character length */
-#define smcr_mk_clen(C)	(((C) << 11) & SMCR_CLEN_MASK)
-
-/* SMC2 as Centronics parallel printer.  It is half duplex, in that
- * it can only receive or transmit.  The parameter ram values for
- * each direction are either unique or properly overlap, so we can
- * include them in one structure.
- */
-typedef struct smc_centronics {
-	ushort	scent_rbase;
-	ushort	scent_tbase;
-	u_char	scent_cfcr;
-	u_char	scent_smask;
-	ushort	scent_mrblr;
-	uint	scent_rstate;
-	uint	scent_r_ptr;
-	ushort	scent_rbptr;
-	ushort	scent_r_cnt;
-	uint	scent_rtemp;
-	uint	scent_tstate;
-	uint	scent_t_ptr;
-	ushort	scent_tbptr;
-	ushort	scent_t_cnt;
-	uint	scent_ttemp;
-	ushort	scent_max_sl;
-	ushort	scent_sl_cnt;
-	ushort	scent_character1;
-	ushort	scent_character2;
-	ushort	scent_character3;
-	ushort	scent_character4;
-	ushort	scent_character5;
-	ushort	scent_character6;
-	ushort	scent_character7;
-	ushort	scent_character8;
-	ushort	scent_rccm;
-	ushort	scent_rccr;
-} smc_cent_t;
-
-/* Centronics Status Mask Register.
-*/
-#define SMC_CENT_F	((u_char)0x08)
-#define SMC_CENT_PE	((u_char)0x04)
-#define SMC_CENT_S	((u_char)0x02)
-
-/* SMC Event and Mask register.
-*/
-#define	SMCM_BRKE	((unsigned char)0x40)	/* When in UART Mode */
-#define	SMCM_BRK	((unsigned char)0x10)	/* When in UART Mode */
-#define	SMCM_TXE	((unsigned char)0x10)	/* When in Transparent Mode */
-#define	SMCM_BSY	((unsigned char)0x04)
-#define	SMCM_TX		((unsigned char)0x02)
-#define	SMCM_RX		((unsigned char)0x01)
-
-/* Baud rate generators.
-*/
-#define CPM_BRG_RST		((uint)0x00020000)
-#define CPM_BRG_EN		((uint)0x00010000)
-#define CPM_BRG_EXTC_INT	((uint)0x00000000)
-#define CPM_BRG_EXTC_CLK2	((uint)0x00004000)
-#define CPM_BRG_EXTC_CLK6	((uint)0x00008000)
-#define CPM_BRG_ATB		((uint)0x00002000)
-#define CPM_BRG_CD_MASK		((uint)0x00001ffe)
-#define CPM_BRG_DIV16		((uint)0x00000001)
-
-/* SCCs.
-*/
-#define SCC_GSMRH_IRP		((uint)0x00040000)
-#define SCC_GSMRH_GDE		((uint)0x00010000)
-#define SCC_GSMRH_TCRC_CCITT	((uint)0x00008000)
-#define SCC_GSMRH_TCRC_BISYNC	((uint)0x00004000)
-#define SCC_GSMRH_TCRC_HDLC	((uint)0x00000000)
-#define SCC_GSMRH_REVD		((uint)0x00002000)
-#define SCC_GSMRH_TRX		((uint)0x00001000)
-#define SCC_GSMRH_TTX		((uint)0x00000800)
-#define SCC_GSMRH_CDP		((uint)0x00000400)
-#define SCC_GSMRH_CTSP		((uint)0x00000200)
-#define SCC_GSMRH_CDS		((uint)0x00000100)
-#define SCC_GSMRH_CTSS		((uint)0x00000080)
-#define SCC_GSMRH_TFL		((uint)0x00000040)
-#define SCC_GSMRH_RFW		((uint)0x00000020)
-#define SCC_GSMRH_TXSY		((uint)0x00000010)
-#define SCC_GSMRH_SYNL16	((uint)0x0000000c)
-#define SCC_GSMRH_SYNL8		((uint)0x00000008)
-#define SCC_GSMRH_SYNL4		((uint)0x00000004)
-#define SCC_GSMRH_RTSM		((uint)0x00000002)
-#define SCC_GSMRH_RSYN		((uint)0x00000001)
-
-#define SCC_GSMRL_SIR		((uint)0x80000000)	/* SCC2 only */
-#define SCC_GSMRL_EDGE_NONE	((uint)0x60000000)
-#define SCC_GSMRL_EDGE_NEG	((uint)0x40000000)
-#define SCC_GSMRL_EDGE_POS	((uint)0x20000000)
-#define SCC_GSMRL_EDGE_BOTH	((uint)0x00000000)
-#define SCC_GSMRL_TCI		((uint)0x10000000)
-#define SCC_GSMRL_TSNC_3	((uint)0x0c000000)
-#define SCC_GSMRL_TSNC_4	((uint)0x08000000)
-#define SCC_GSMRL_TSNC_14	((uint)0x04000000)
-#define SCC_GSMRL_TSNC_INF	((uint)0x00000000)
-#define SCC_GSMRL_RINV		((uint)0x02000000)
-#define SCC_GSMRL_TINV		((uint)0x01000000)
-#define SCC_GSMRL_TPL_128	((uint)0x00c00000)
-#define SCC_GSMRL_TPL_64	((uint)0x00a00000)
-#define SCC_GSMRL_TPL_48	((uint)0x00800000)
-#define SCC_GSMRL_TPL_32	((uint)0x00600000)
-#define SCC_GSMRL_TPL_16	((uint)0x00400000)
-#define SCC_GSMRL_TPL_8		((uint)0x00200000)
-#define SCC_GSMRL_TPL_NONE	((uint)0x00000000)
-#define SCC_GSMRL_TPP_ALL1	((uint)0x00180000)
-#define SCC_GSMRL_TPP_01	((uint)0x00100000)
-#define SCC_GSMRL_TPP_10	((uint)0x00080000)
-#define SCC_GSMRL_TPP_ZEROS	((uint)0x00000000)
-#define SCC_GSMRL_TEND		((uint)0x00040000)
-#define SCC_GSMRL_TDCR_32	((uint)0x00030000)
-#define SCC_GSMRL_TDCR_16	((uint)0x00020000)
-#define SCC_GSMRL_TDCR_8	((uint)0x00010000)
-#define SCC_GSMRL_TDCR_1	((uint)0x00000000)
-#define SCC_GSMRL_RDCR_32	((uint)0x0000c000)
-#define SCC_GSMRL_RDCR_16	((uint)0x00008000)
-#define SCC_GSMRL_RDCR_8	((uint)0x00004000)
-#define SCC_GSMRL_RDCR_1	((uint)0x00000000)
-#define SCC_GSMRL_RENC_DFMAN	((uint)0x00003000)
-#define SCC_GSMRL_RENC_MANCH	((uint)0x00002000)
-#define SCC_GSMRL_RENC_FM0	((uint)0x00001000)
-#define SCC_GSMRL_RENC_NRZI	((uint)0x00000800)
-#define SCC_GSMRL_RENC_NRZ	((uint)0x00000000)
-#define SCC_GSMRL_TENC_DFMAN	((uint)0x00000600)
-#define SCC_GSMRL_TENC_MANCH	((uint)0x00000400)
-#define SCC_GSMRL_TENC_FM0	((uint)0x00000200)
-#define SCC_GSMRL_TENC_NRZI	((uint)0x00000100)
-#define SCC_GSMRL_TENC_NRZ	((uint)0x00000000)
-#define SCC_GSMRL_DIAG_LE	((uint)0x000000c0)	/* Loop and echo */
-#define SCC_GSMRL_DIAG_ECHO	((uint)0x00000080)
-#define SCC_GSMRL_DIAG_LOOP	((uint)0x00000040)
-#define SCC_GSMRL_DIAG_NORM	((uint)0x00000000)
-#define SCC_GSMRL_ENR		((uint)0x00000020)
-#define SCC_GSMRL_ENT		((uint)0x00000010)
-#define SCC_GSMRL_MODE_ENET	((uint)0x0000000c)
-#define SCC_GSMRL_MODE_DDCMP	((uint)0x00000009)
-#define SCC_GSMRL_MODE_BISYNC	((uint)0x00000008)
-#define SCC_GSMRL_MODE_V14	((uint)0x00000007)
-#define SCC_GSMRL_MODE_AHDLC	((uint)0x00000006)
-#define SCC_GSMRL_MODE_PROFIBUS	((uint)0x00000005)
-#define SCC_GSMRL_MODE_UART	((uint)0x00000004)
-#define SCC_GSMRL_MODE_SS7	((uint)0x00000003)
-#define SCC_GSMRL_MODE_ATALK	((uint)0x00000002)
-#define SCC_GSMRL_MODE_HDLC	((uint)0x00000000)
-
-#define SCC_TODR_TOD		((ushort)0x8000)
-
-/* SCC Event and Mask register.
-*/
-#define	SCCM_TXE	((unsigned char)0x10)
-#define	SCCM_BSY	((unsigned char)0x04)
-#define	SCCM_TX		((unsigned char)0x02)
-#define	SCCM_RX		((unsigned char)0x01)
-
-typedef struct scc_param {
-	ushort	scc_rbase;	/* Rx Buffer descriptor base address */
-	ushort	scc_tbase;	/* Tx Buffer descriptor base address */
-	u_char	scc_rfcr;	/* Rx function code */
-	u_char	scc_tfcr;	/* Tx function code */
-	ushort	scc_mrblr;	/* Max receive buffer length */
-	uint	scc_rstate;	/* Internal */
-	uint	scc_idp;	/* Internal */
-	ushort	scc_rbptr;	/* Internal */
-	ushort	scc_ibc;	/* Internal */
-	uint	scc_rxtmp;	/* Internal */
-	uint	scc_tstate;	/* Internal */
-	uint	scc_tdp;	/* Internal */
-	ushort	scc_tbptr;	/* Internal */
-	ushort	scc_tbc;	/* Internal */
-	uint	scc_txtmp;	/* Internal */
-	uint	scc_rcrc;	/* Internal */
-	uint	scc_tcrc;	/* Internal */
-} sccp_t;
-
-
-/* Function code bits.
- */
-#define SCC_EB	((u_char)0x10)	/* Set big endian byte order */
-#define SCC_FC_DMA ((u_char)0x08) /* Set SDMA */
-
-/* CPM Ethernet through SCC1.
- */
-typedef struct scc_enet {
-	sccp_t	sen_genscc;
-	uint	sen_cpres;	/* Preset CRC */
-	uint	sen_cmask;	/* Constant mask for CRC */
-	uint	sen_crcec;	/* CRC Error counter */
-	uint	sen_alec;	/* alignment error counter */
-	uint	sen_disfc;	/* discard frame counter */
-	ushort	sen_pads;	/* Tx short frame pad character */
-	ushort	sen_retlim;	/* Retry limit threshold */
-	ushort	sen_retcnt;	/* Retry limit counter */
-	ushort	sen_maxflr;	/* maximum frame length register */
-	ushort	sen_minflr;	/* minimum frame length register */
-	ushort	sen_maxd1;	/* maximum DMA1 length */
-	ushort	sen_maxd2;	/* maximum DMA2 length */
-	ushort	sen_maxd;	/* Rx max DMA */
-	ushort	sen_dmacnt;	/* Rx DMA counter */
-	ushort	sen_maxb;	/* Max BD byte count */
-	ushort	sen_gaddr1;	/* Group address filter */
-	ushort	sen_gaddr2;
-	ushort	sen_gaddr3;
-	ushort	sen_gaddr4;
-	uint	sen_tbuf0data0;	/* Save area 0 - current frame */
-	uint	sen_tbuf0data1;	/* Save area 1 - current frame */
-	uint	sen_tbuf0rba;	/* Internal */
-	uint	sen_tbuf0crc;	/* Internal */
-	ushort	sen_tbuf0bcnt;	/* Internal */
-	ushort	sen_paddrh;	/* physical address (MSB) */
-	ushort	sen_paddrm;
-	ushort	sen_paddrl;	/* physical address (LSB) */
-	ushort	sen_pper;	/* persistence */
-	ushort	sen_rfbdptr;	/* Rx first BD pointer */
-	ushort	sen_tfbdptr;	/* Tx first BD pointer */
-	ushort	sen_tlbdptr;	/* Tx last BD pointer */
-	uint	sen_tbuf1data0;	/* Save area 0 - current frame */
-	uint	sen_tbuf1data1;	/* Save area 1 - current frame */
-	uint	sen_tbuf1rba;	/* Internal */
-	uint	sen_tbuf1crc;	/* Internal */
-	ushort	sen_tbuf1bcnt;	/* Internal */
-	ushort	sen_txlen;	/* Tx Frame length counter */
-	ushort	sen_iaddr1;	/* Individual address filter */
-	ushort	sen_iaddr2;
-	ushort	sen_iaddr3;
-	ushort	sen_iaddr4;
-	ushort	sen_boffcnt;	/* Backoff counter */
-
-	/* NOTE: Some versions of the manual have the following items
-	 * incorrectly documented.  Below is the proper order.
-	 */
-	ushort	sen_taddrh;	/* temp address (MSB) */
-	ushort	sen_taddrm;
-	ushort	sen_taddrl;	/* temp address (LSB) */
-} scc_enet_t;
-
-
-
-#if defined (CONFIG_UCQUICC)
-/* uCquicc has the following signals connected to Ethernet:
- *  68360    - lxt905
- * PA0/RXD1  - rxd
- * PA1/TXD1  - txd
- * PA8/CLK1  - tclk
- * PA9/CLK2  - rclk
- * PC0/!RTS1 - t_en
- * PC1/!CTS1 - col
- * PC5/!CD1  - cd
- */
-#define PA_ENET_RXD	PA_RXD1
-#define PA_ENET_TXD	PA_TXD1
-#define PA_ENET_TCLK	PA_CLK1
-#define PA_ENET_RCLK	PA_CLK2
-#define PC_ENET_TENA	PC_RTS1
-#define PC_ENET_CLSN	PC_CTS1
-#define PC_ENET_RENA	PC_CD1
-
-/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to
- * SCC1.
- */
-#define SICR_ENET_MASK	((uint)0x000000ff)
-#define SICR_ENET_CLKRT	((uint)0x0000002c)
-
-#endif /* config_ucquicc */
-
-
-#ifdef MBX
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.  The TCLK and RCLK seem unique
- * to the MBX860 board.  Any two of the four available clocks could be
- * used, and the MPC860 cookbook manual has an example using different
- * clock pins.
- */
-#define PA_ENET_RXD	((ushort)0x0001)
-#define PA_ENET_TXD	((ushort)0x0002)
-#define PA_ENET_TCLK	((ushort)0x0200)
-#define PA_ENET_RCLK	((ushort)0x0800)
-#define PC_ENET_TENA	((ushort)0x0001)
-#define PC_ENET_CLSN	((ushort)0x0010)
-#define PC_ENET_RENA	((ushort)0x0020)
-
-/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
- * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x000000ff)
-#define SICR_ENET_CLKRT	((uint)0x0000003d)
-#endif
-
-#ifdef CONFIG_RPXLITE
-/* This ENET stuff is for the MPC850 with ethernet on SCC2.  Some of
- * this may be unique to the RPX-Lite configuration.
- * Note TENA is on Port B.
- */
-#define PA_ENET_RXD	((ushort)0x0004)
-#define PA_ENET_TXD	((ushort)0x0008)
-#define PA_ENET_TCLK	((ushort)0x0200)
-#define PA_ENET_RCLK	((ushort)0x0800)
-#define PB_ENET_TENA	((uint)0x00002000)
-#define PC_ENET_CLSN	((ushort)0x0040)
-#define PC_ENET_RENA	((ushort)0x0080)
-
-#define SICR_ENET_MASK	((uint)0x0000ff00)
-#define SICR_ENET_CLKRT	((uint)0x00003d00)
-#endif
-
-#ifdef CONFIG_BSEIP
-/* This ENET stuff is for the MPC823 with ethernet on SCC2.
- * This is unique to the BSE ip-Engine board.
- */
-#define PA_ENET_RXD	((ushort)0x0004)
-#define PA_ENET_TXD	((ushort)0x0008)
-#define PA_ENET_TCLK	((ushort)0x0100)
-#define PA_ENET_RCLK	((ushort)0x0200)
-#define PB_ENET_TENA	((uint)0x00002000)
-#define PC_ENET_CLSN	((ushort)0x0040)
-#define PC_ENET_RENA	((ushort)0x0080)
-
-/* BSE uses port B and C bits for PHY control also.
-*/
-#define PB_BSE_POWERUP	((uint)0x00000004)
-#define PB_BSE_FDXDIS	((uint)0x00008000)
-#define PC_BSE_LOOPBACK	((ushort)0x0800)
-
-#define SICR_ENET_MASK	((uint)0x0000ff00)
-#define SICR_ENET_CLKRT	((uint)0x00002c00)
-#endif
-
-/* SCC Event register as used by Ethernet.
-*/
-#define SCCE_ENET_GRA	((ushort)0x0080)	/* Graceful stop complete */
-#define SCCE_ENET_TXE	((ushort)0x0010)	/* Transmit Error */
-#define SCCE_ENET_RXF	((ushort)0x0008)	/* Full frame received */
-#define SCCE_ENET_BSY	((ushort)0x0004)	/* All incoming buffers full */
-#define SCCE_ENET_TXB	((ushort)0x0002)	/* A buffer was transmitted */
-#define SCCE_ENET_RXB	((ushort)0x0001)	/* A buffer was received */
-
-/* SCC Mode Register (PMSR) as used by Ethernet.
-*/
-#define SCC_PMSR_HBC	((ushort)0x8000)	/* Enable heartbeat */
-#define SCC_PMSR_FC	((ushort)0x4000)	/* Force collision */
-#define SCC_PMSR_RSH	((ushort)0x2000)	/* Receive short frames */
-#define SCC_PMSR_IAM	((ushort)0x1000)	/* Check individual hash */
-#define SCC_PMSR_ENCRC	((ushort)0x0800)	/* Ethernet CRC mode */
-#define SCC_PMSR_PRO	((ushort)0x0200)	/* Promiscuous mode */
-#define SCC_PMSR_BRO	((ushort)0x0100)	/* Catch broadcast pkts */
-#define SCC_PMSR_SBT	((ushort)0x0080)	/* Special backoff timer */
-#define SCC_PMSR_LPB	((ushort)0x0040)	/* Set Loopback mode */
-#define SCC_PMSR_SIP	((ushort)0x0020)	/* Sample Input Pins */
-#define SCC_PMSR_LCW	((ushort)0x0010)	/* Late collision window */
-#define SCC_PMSR_NIB22	((ushort)0x000a)	/* Start frame search */
-#define SCC_PMSR_FDE	((ushort)0x0001)	/* Full duplex enable */
-
-/* Buffer descriptor control/status used by Ethernet receive.
-*/
-#define BD_ENET_RX_EMPTY	((ushort)0x8000)
-#define BD_ENET_RX_WRAP		((ushort)0x2000)
-#define BD_ENET_RX_INTR		((ushort)0x1000)
-#define BD_ENET_RX_LAST		((ushort)0x0800)
-#define BD_ENET_RX_FIRST	((ushort)0x0400)
-#define BD_ENET_RX_MISS		((ushort)0x0100)
-#define BD_ENET_RX_LG		((ushort)0x0020)
-#define BD_ENET_RX_NO		((ushort)0x0010)
-#define BD_ENET_RX_SH		((ushort)0x0008)
-#define BD_ENET_RX_CR		((ushort)0x0004)
-#define BD_ENET_RX_OV		((ushort)0x0002)
-#define BD_ENET_RX_CL		((ushort)0x0001)
-#define BD_ENET_RX_STATS	((ushort)0x013f)	/* All status bits */
-
-/* Buffer descriptor control/status used by Ethernet transmit.
-*/
-#define BD_ENET_TX_READY	((ushort)0x8000)
-#define BD_ENET_TX_PAD		((ushort)0x4000)
-#define BD_ENET_TX_WRAP		((ushort)0x2000)
-#define BD_ENET_TX_INTR		((ushort)0x1000)
-#define BD_ENET_TX_LAST		((ushort)0x0800)
-#define BD_ENET_TX_TC		((ushort)0x0400)
-#define BD_ENET_TX_DEF		((ushort)0x0200)
-#define BD_ENET_TX_HB		((ushort)0x0100)
-#define BD_ENET_TX_LC		((ushort)0x0080)
-#define BD_ENET_TX_RL		((ushort)0x0040)
-#define BD_ENET_TX_RCMASK	((ushort)0x003c)
-#define BD_ENET_TX_UN		((ushort)0x0002)
-#define BD_ENET_TX_CSL		((ushort)0x0001)
-#define BD_ENET_TX_STATS	((ushort)0x03ff)	/* All status bits */
-
-/* SCC as UART
-*/
-typedef struct scc_uart {
-	sccp_t	scc_genscc;
-	uint	scc_res1;	/* Reserved */
-	uint	scc_res2;	/* Reserved */
-	ushort	scc_maxidl;	/* Maximum idle chars */
-	ushort	scc_idlc;	/* temp idle counter */
-	ushort	scc_brkcr;	/* Break count register */
-	ushort	scc_parec;	/* receive parity error counter */
-	ushort	scc_frmec;	/* receive framing error counter */
-	ushort	scc_nosec;	/* receive noise counter */
-	ushort	scc_brkec;	/* receive break condition counter */
-	ushort	scc_brkln;	/* last received break length */
-	ushort	scc_uaddr1;	/* UART address character 1 */
-	ushort	scc_uaddr2;	/* UART address character 2 */
-	ushort	scc_rtemp;	/* Temp storage */
-	ushort	scc_toseq;	/* Transmit out of sequence char */
-	ushort	scc_char1;	/* control character 1 */
-	ushort	scc_char2;	/* control character 2 */
-	ushort	scc_char3;	/* control character 3 */
-	ushort	scc_char4;	/* control character 4 */
-	ushort	scc_char5;	/* control character 5 */
-	ushort	scc_char6;	/* control character 6 */
-	ushort	scc_char7;	/* control character 7 */
-	ushort	scc_char8;	/* control character 8 */
-	ushort	scc_rccm;	/* receive control character mask */
-	ushort	scc_rccr;	/* receive control character register */
-	ushort	scc_rlbc;	/* receive last break character */
-} scc_uart_t;
-
-/* SCC Event and Mask registers when it is used as a UART.
-*/
-#define UART_SCCM_GLR		((ushort)0x1000)
-#define UART_SCCM_GLT		((ushort)0x0800)
-#define UART_SCCM_AB		((ushort)0x0200)
-#define UART_SCCM_IDL		((ushort)0x0100)
-#define UART_SCCM_GRA		((ushort)0x0080)
-#define UART_SCCM_BRKE		((ushort)0x0040)
-#define UART_SCCM_BRKS		((ushort)0x0020)
-#define UART_SCCM_CCR		((ushort)0x0008)
-#define UART_SCCM_BSY		((ushort)0x0004)
-#define UART_SCCM_TX		((ushort)0x0002)
-#define UART_SCCM_RX		((ushort)0x0001)
-
-/* The SCC PMSR when used as a UART.
-*/
-#define SCU_PMSR_FLC		((ushort)0x8000)
-#define SCU_PMSR_SL		((ushort)0x4000)
-#define SCU_PMSR_CL		((ushort)0x3000)
-#define SCU_PMSR_UM		((ushort)0x0c00)
-#define SCU_PMSR_FRZ		((ushort)0x0200)
-#define SCU_PMSR_RZS		((ushort)0x0100)
-#define SCU_PMSR_SYN		((ushort)0x0080)
-#define SCU_PMSR_DRT		((ushort)0x0040)
-#define SCU_PMSR_PEN		((ushort)0x0010)
-#define SCU_PMSR_RPM		((ushort)0x000c)
-#define SCU_PMSR_REVP		((ushort)0x0008)
-#define SCU_PMSR_TPM		((ushort)0x0003)
-#define SCU_PMSR_TEVP		((ushort)0x0003)
-
-/* CPM Transparent mode SCC.
- */
-typedef struct scc_trans {
-	sccp_t	st_genscc;
-	uint	st_cpres;	/* Preset CRC */
-	uint	st_cmask;	/* Constant mask for CRC */
-} scc_trans_t;
-
-#define BD_SCC_TX_LAST		((ushort)0x0800)
-
-
-
-/* CPM interrupts.  There are nearly 32 interrupts generated by CPM
- * channels or devices.  All of these are presented to the PPC core
- * as a single interrupt.  The CPM interrupt handler dispatches its
- * own handlers, in a similar fashion to the PPC core handler.  We
- * use the table as defined in the manuals (i.e. no special high
- * priority and SCC1 == SCCa, etc...).
- */
-/* #define CPMVEC_NR		32 */
-/* #define	CPMVEC_PIO_PC15		((ushort)0x1f) */
-/* #define	CPMVEC_SCC1		((ushort)0x1e) */
-/* #define	CPMVEC_SCC2		((ushort)0x1d) */
-/* #define	CPMVEC_SCC3		((ushort)0x1c) */
-/* #define	CPMVEC_SCC4		((ushort)0x1b) */
-/* #define	CPMVEC_PIO_PC14		((ushort)0x1a) */
-/* #define	CPMVEC_TIMER1		((ushort)0x19) */
-/* #define	CPMVEC_PIO_PC13		((ushort)0x18) */
-/* #define	CPMVEC_PIO_PC12		((ushort)0x17) */
-/* #define	CPMVEC_SDMA_CB_ERR	((ushort)0x16) */
-/* #define CPMVEC_IDMA1		((ushort)0x15) */
-/* #define CPMVEC_IDMA2		((ushort)0x14) */
-/* #define CPMVEC_TIMER2		((ushort)0x12) */
-/* #define CPMVEC_RISCTIMER	((ushort)0x11) */
-/* #define CPMVEC_I2C		((ushort)0x10) */
-/* #define	CPMVEC_PIO_PC11		((ushort)0x0f) */
-/* #define	CPMVEC_PIO_PC10		((ushort)0x0e) */
-/* #define CPMVEC_TIMER3		((ushort)0x0c) */
-/* #define	CPMVEC_PIO_PC9		((ushort)0x0b) */
-/* #define	CPMVEC_PIO_PC8		((ushort)0x0a) */
-/* #define	CPMVEC_PIO_PC7		((ushort)0x09) */
-/* #define CPMVEC_TIMER4		((ushort)0x07) */
-/* #define	CPMVEC_PIO_PC6		((ushort)0x06) */
-/* #define	CPMVEC_SPI		((ushort)0x05) */
-/* #define	CPMVEC_SMC1		((ushort)0x04) */
-/* #define	CPMVEC_SMC2		((ushort)0x03) */
-/* #define	CPMVEC_PIO_PC5		((ushort)0x02) */
-/* #define	CPMVEC_PIO_PC4		((ushort)0x01) */
-/* #define	CPMVEC_ERROR		((ushort)0x00) */
-
-extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id);
-
-/* CPM interrupt configuration vector.
-*/
-#define	CICR_SCD_SCC4		((uint)0x00c00000)	/* SCC4 @ SCCd */
-#define	CICR_SCC_SCC3		((uint)0x00200000)	/* SCC3 @ SCCc */
-#define	CICR_SCB_SCC2		((uint)0x00040000)	/* SCC2 @ SCCb */
-#define	CICR_SCA_SCC1		((uint)0x00000000)	/* SCC1 @ SCCa */
-#define CICR_IRL_MASK		((uint)0x0000e000)	/* Core interrupt */
-#define CICR_HP_MASK		((uint)0x00001f00)	/* Hi-pri int. */
-#define CICR_IEN		((uint)0x00000080)	/* Int. enable */
-#define CICR_SPS		((uint)0x00000001)	/* SCC Spread */
-#endif /* __CPM_360__ */
diff --git a/arch/m68knommu/include/asm/cputime.h b/arch/m68knommu/include/asm/cputime.h
deleted file mode 100644
index a0c4a660878d..000000000000
--- a/arch/m68knommu/include/asm/cputime.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __M68KNOMMU_CPUTIME_H
-#define __M68KNOMMU_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __M68KNOMMU_CPUTIME_H */
diff --git a/arch/m68knommu/include/asm/current.h b/arch/m68knommu/include/asm/current.h
deleted file mode 100644
index 53ee0f9f7cef..000000000000
--- a/arch/m68knommu/include/asm/current.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _M68KNOMMU_CURRENT_H
-#define _M68KNOMMU_CURRENT_H
-/*
- *	current.h
- *	(C) Copyright 2000, Lineo, David McCullough <davidm@uclinux.org>
- *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
- *
- *	rather than dedicate a register (as the m68k source does), we
- *	just keep a global,  we should probably just change it all to be
- *	current and lose _current_task.
- */
-
-#include <linux/thread_info.h>
-
-struct task_struct;
-
-static inline struct task_struct *get_current(void)
-{
-	return(current_thread_info()->task);
-}
-
-#define	current	get_current()
-
-#endif /* _M68KNOMMU_CURRENT_H */
diff --git a/arch/m68knommu/include/asm/dbg.h b/arch/m68knommu/include/asm/dbg.h
deleted file mode 100644
index 27af3270f671..000000000000
--- a/arch/m68knommu/include/asm/dbg.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#define DEBUG 1
-#ifdef CONFIG_COLDFIRE
-#define	BREAK asm volatile ("halt")
-#else
-#define BREAK *(volatile unsigned char *)0xdeadbee0 = 0
-#endif
diff --git a/arch/m68knommu/include/asm/delay.h b/arch/m68knommu/include/asm/delay.h
deleted file mode 100644
index 55cbd6294ab6..000000000000
--- a/arch/m68knommu/include/asm/delay.h
+++ /dev/null
@@ -1,76 +0,0 @@
-#ifndef _M68KNOMMU_DELAY_H
-#define _M68KNOMMU_DELAY_H
-
-/*
- * Copyright (C) 1994 Hamish Macdonald
- * Copyright (C) 2004 Greg Ungerer <gerg@snapgear.com>
- */
-
-#include <asm/param.h>
-
-static inline void __delay(unsigned long loops)
-{
-#if defined(CONFIG_COLDFIRE)
-	/* The coldfire runs this loop at significantly different speeds
-	 * depending upon long word alignment or not.  We'll pad it to
-	 * long word alignment which is the faster version.
-	 * The 0x4a8e is of course a 'tstl %fp' instruction.  This is better
-	 * than using a NOP (0x4e71) instruction because it executes in one
-	 * cycle not three and doesn't allow for an arbitary delay waiting
-	 * for bus cycles to finish.  Also fp/a6 isn't likely to cause a
-	 * stall waiting for the register to become valid if such is added
-	 * to the coldfire at some stage.
-	 */
-	__asm__ __volatile__ (	".balignw 4, 0x4a8e\n\t"
-				"1: subql #1, %0\n\t"
-				"jcc 1b"
-		: "=d" (loops) : "0" (loops));
-#else
-	__asm__ __volatile__ (	"1: subql #1, %0\n\t"
-				"jcc 1b"
-		: "=d" (loops) : "0" (loops));
-#endif
-}
-
-/*
- *	Ideally we use a 32*32->64 multiply to calculate the number of
- *	loop iterations, but the older standard 68k and ColdFire do not
- *	have this instruction. So for them we have a clsoe approximation
- *	loop using 32*32->32 multiplies only. This calculation based on
- *	the ARM version of delay.
- *
- *	We want to implement:
- *
- *	loops = (usecs * 0x10c6 * HZ * loops_per_jiffy) / 2^32
- */
-
-#define	HZSCALE		(268435456 / (1000000/HZ))
-
-extern unsigned long loops_per_jiffy;
-
-static inline void _udelay(unsigned long usecs)
-{
-#if defined(CONFIG_M68328) || defined(CONFIG_M68EZ328) || \
-    defined(CONFIG_M68VZ328) || defined(CONFIG_M68360) || \
-    defined(CONFIG_COLDFIRE)
-	__delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6);
-#else
-	unsigned long tmp;
-
-	usecs *= 4295;		/* 2**32 / 1000000 */
-	__asm__ ("mulul %2,%0:%1"
-		: "=d" (usecs), "=d" (tmp)
-		: "d" (usecs), "1" (loops_per_jiffy*HZ));
-	__delay(usecs);
-#endif
-}
-
-/*
- *	Moved the udelay() function into library code, no longer inlined.
- *	I had to change the algorithm because we are overflowing now on
- *	the faster ColdFire parts. The code is a little bigger, so it makes
- *	sense to library it.
- */
-extern void udelay(unsigned long usecs);
-
-#endif /* defined(_M68KNOMMU_DELAY_H) */
diff --git a/arch/m68knommu/include/asm/device.h b/arch/m68knommu/include/asm/device.h
deleted file mode 100644
index d8f9872b0e2d..000000000000
--- a/arch/m68knommu/include/asm/device.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
diff --git a/arch/m68knommu/include/asm/div64.h b/arch/m68knommu/include/asm/div64.h
deleted file mode 100644
index 6cd978cefb28..000000000000
--- a/arch/m68knommu/include/asm/div64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/div64.h>
diff --git a/arch/m68knommu/include/asm/dma-mapping.h b/arch/m68knommu/include/asm/dma-mapping.h
deleted file mode 100644
index 6aeab18e58bd..000000000000
--- a/arch/m68knommu/include/asm/dma-mapping.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _M68KNOMMU_DMA_MAPPING_H
-#define _M68KNOMMU_DMA_MAPPING_H
-
-#ifdef CONFIG_PCI
-#include <asm-generic/dma-mapping.h>
-#else
-#include <asm-generic/dma-mapping-broken.h>
-#endif
-
-#endif  /* _M68KNOMMU_DMA_MAPPING_H */
diff --git a/arch/m68knommu/include/asm/dma.h b/arch/m68knommu/include/asm/dma.h
deleted file mode 100644
index 939a02056217..000000000000
--- a/arch/m68knommu/include/asm/dma.h
+++ /dev/null
@@ -1,494 +0,0 @@
-#ifndef _M68K_DMA_H
-#define _M68K_DMA_H 1
- 
-//#define	DMA_DEBUG	1
-
-
-#ifdef CONFIG_COLDFIRE
-/*
- * ColdFire DMA Model:
- *   ColdFire DMA supports two forms of DMA: Single and Dual address. Single
- * address mode emits a source address, and expects that the device will either
- * pick up the data (DMA READ) or source data (DMA WRITE). This implies that
- * the device will place data on the correct byte(s) of the data bus, as the
- * memory transactions are always 32 bits. This implies that only 32 bit
- * devices will find single mode transfers useful. Dual address DMA mode
- * performs two cycles: source read and destination write. ColdFire will
- * align the data so that the device will always get the correct bytes, thus
- * is useful for 8 and 16 bit devices. This is the mode that is supported
- * below.
- *
- * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000 
- *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
- *
- * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000
- *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
- *
- * APR/18/2002 : added proper support for MCF5272 DMA controller.
- *               Arthur Shipkowski (art@videon-central.com)
- */
-
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfdma.h>
-
-/*
- * Set number of channels of DMA on ColdFire for different implementations.
- */
-#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \
-	defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
-#define MAX_M68K_DMA_CHANNELS 4
-#elif defined(CONFIG_M5272)
-#define MAX_M68K_DMA_CHANNELS 1
-#elif defined(CONFIG_M532x)
-#define MAX_M68K_DMA_CHANNELS 0
-#else
-#define MAX_M68K_DMA_CHANNELS 2
-#endif
-
-extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS];
-extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
-
-#if !defined(CONFIG_M5272)
-#define DMA_MODE_WRITE_BIT  0x01  /* Memory/IO to IO/Memory select */
-#define DMA_MODE_WORD_BIT   0x02  /* 8 or 16 bit transfers */
-#define DMA_MODE_LONG_BIT   0x04  /* or 32 bit transfers */
-#define DMA_MODE_SINGLE_BIT 0x08  /* single-address-mode */
-
-/* I/O to memory, 8 bits, mode */
-#define DMA_MODE_READ	            0
-/* memory to I/O, 8 bits, mode */
-#define DMA_MODE_WRITE	            1
-/* I/O to memory, 16 bits, mode */
-#define DMA_MODE_READ_WORD          2
-/* memory to I/O, 16 bits, mode */
-#define DMA_MODE_WRITE_WORD         3
-/* I/O to memory, 32 bits, mode */
-#define DMA_MODE_READ_LONG          4
-/* memory to I/O, 32 bits, mode */
-#define DMA_MODE_WRITE_LONG         5
-/* I/O to memory, 8 bits, single-address-mode */     
-#define DMA_MODE_READ_SINGLE        8
-/* memory to I/O, 8 bits, single-address-mode */
-#define DMA_MODE_WRITE_SINGLE       9
-/* I/O to memory, 16 bits, single-address-mode */
-#define DMA_MODE_READ_WORD_SINGLE  10
-/* memory to I/O, 16 bits, single-address-mode */
-#define DMA_MODE_WRITE_WORD_SINGLE 11
-/* I/O to memory, 32 bits, single-address-mode */
-#define DMA_MODE_READ_LONG_SINGLE  12
-/* memory to I/O, 32 bits, single-address-mode */
-#define DMA_MODE_WRITE_LONG_SINGLE 13
-
-#else /* CONFIG_M5272 is defined */
-
-/* Source static-address mode */
-#define DMA_MODE_SRC_SA_BIT 0x01  
-/* Two bits to select between all four modes */
-#define DMA_MODE_SSIZE_MASK 0x06 
-/* Offset to shift bits in */
-#define DMA_MODE_SSIZE_OFF  0x01  
-/* Destination static-address mode */
-#define DMA_MODE_DES_SA_BIT 0x10  
-/* Two bits to select between all four modes */
-#define DMA_MODE_DSIZE_MASK 0x60  
-/* Offset to shift bits in */
-#define DMA_MODE_DSIZE_OFF  0x05
-/* Size modifiers */
-#define DMA_MODE_SIZE_LONG  0x00
-#define DMA_MODE_SIZE_BYTE  0x01
-#define DMA_MODE_SIZE_WORD  0x02
-#define DMA_MODE_SIZE_LINE  0x03
-
-/* 
- * Aliases to help speed quick ports; these may be suboptimal, however. They
- * do not include the SINGLE mode modifiers since the MCF5272 does not have a
- * mode where the device is in control of its addressing.
- */
-
-/* I/O to memory, 8 bits, mode */
-#define DMA_MODE_READ	              ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
-/* memory to I/O, 8 bits, mode */
-#define DMA_MODE_WRITE	            ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
-/* I/O to memory, 16 bits, mode */
-#define DMA_MODE_READ_WORD	        ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
-/* memory to I/O, 16 bits, mode */
-#define DMA_MODE_WRITE_WORD         ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
-/* I/O to memory, 32 bits, mode */
-#define DMA_MODE_READ_LONG	        ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
-/* memory to I/O, 32 bits, mode */
-#define DMA_MODE_WRITE_LONG         ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
-
-#endif /* !defined(CONFIG_M5272) */
-
-#if !defined(CONFIG_M5272)
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
-  volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
-  printk("enable_dma(dmanr=%d)\n", dmanr);
-#endif
-
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-  dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT;
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
-  volatile unsigned short *dmawp;
-  volatile unsigned char  *dmapb;
-
-#ifdef DMA_DEBUG
-  printk("disable_dma(dmanr=%d)\n", dmanr);
-#endif
-
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-  dmapb = (unsigned char *) dma_base_addr[dmanr];
-
-  /* Turn off external requests, and stop any DMA in progress */
-  dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT;
-  dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE;
-}
-
-/*
- * Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while interrupts are disabled! ---
- *
- * This is a NOP for ColdFire. Provide a stub for compatibility.
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
-
-  volatile unsigned char  *dmabp;
-  volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
-#endif
-
-  dmabp = (unsigned char *) dma_base_addr[dmanr];
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-
-  // Clear config errors
-  dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE; 
-
-  // Set command register
-  dmawp[MCFDMA_DCR] =
-    MCFDMA_DCR_INT |         // Enable completion irq
-    MCFDMA_DCR_CS |          // Force one xfer per request
-    MCFDMA_DCR_AA |          // Enable auto alignment
-    // single-address-mode
-    ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) |
-    // sets s_rw (-> r/w) high if Memory to I/0
-    ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) |
-    // Memory to I/O or I/O to Memory
-    ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) |
-    // 32 bit, 16 bit or 8 bit transfers
-    ((mode & DMA_MODE_WORD_BIT)  ? MCFDMA_DCR_SSIZE_WORD : 
-     ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG :
-                                   MCFDMA_DCR_SSIZE_BYTE)) |
-    ((mode & DMA_MODE_WORD_BIT)  ? MCFDMA_DCR_DSIZE_WORD :
-     ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG :
-                                   MCFDMA_DCR_DSIZE_BYTE));
-
-#ifdef DEBUG_DMA
-  printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__,
-         dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR],
-	 (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]);
-#endif
-}
-
-/* Set transfer address for specific DMA channel */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
-  volatile unsigned short *dmawp;
-  volatile unsigned int   *dmalp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-
-  // Determine which address registers are used for memory/device accesses
-  if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) {
-    // Source incrementing, must be memory
-    dmalp[MCFDMA_SAR] = a;
-    // Set dest address, must be device
-    dmalp[MCFDMA_DAR] = dma_device_address[dmanr];
-  } else {
-    // Destination incrementing, must be memory
-    dmalp[MCFDMA_DAR] = a;
-    // Set source address, must be device
-    dmalp[MCFDMA_SAR] = dma_device_address[dmanr];
-  }
-
-#ifdef DEBUG_DMA
-  printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
-	__FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR],
-	(int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR],
-	(int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]);
-#endif
-}
-
-/*
- * Specific for Coldfire - sets device address.
- * Should be called after the mode set call, and before set DMA address.
- */
-static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
-{
-#ifdef DMA_DEBUG
-  printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
-  dma_device_address[dmanr] = a;
-}
-
-/*
- * NOTE 2: "count" represents _bytes_.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
-  volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
-#endif
-
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-  dmawp[MCFDMA_BCR] = (unsigned short)count;
-}
-
-/*
- * Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
-  volatile unsigned short *dmawp;
-  unsigned short count;
-
-#ifdef DMA_DEBUG
-  printk("get_dma_residue(dmanr=%d)\n", dmanr);
-#endif
-
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-  count = dmawp[MCFDMA_BCR];
-  return((int) count);
-}
-#else /* CONFIG_M5272 is defined */
-
-/*
- * The MCF5272 DMA controller is very different than the controller defined above
- * in terms of register mapping.  For instance, with the exception of the 16-bit 
- * interrupt register (IRQ#85, for reference), all of the registers are 32-bit.
- *
- * The big difference, however, is the lack of device-requested DMA.  All modes
- * are dual address transfer, and there is no 'device' setup or direction bit.
- * You can DMA between a device and memory, between memory and memory, or even between
- * two devices directly, with any combination of incrementing and non-incrementing
- * addresses you choose.  This puts a crimp in distinguishing between the 'device 
- * address' set up by set_dma_device_addr.
- *
- * Therefore, there are two options.  One is to use set_dma_addr and set_dma_device_addr,
- * which will act exactly as above in -- it will look to see if the source is set to
- * autoincrement, and if so it will make the source use the set_dma_addr value and the
- * destination the set_dma_device_addr value.  Otherwise the source will be set to the
- * set_dma_device_addr value and the destination will get the set_dma_addr value.
- *
- * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions
- * and make it explicit.  Depending on what you're doing, one of these two should work
- * for you, but don't mix them in the same transfer setup.
- */
-
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
-  volatile unsigned int  *dmalp;
-
-#ifdef DMA_DEBUG
-  printk("enable_dma(dmanr=%d)\n", dmanr);
-#endif
-
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN;
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
-  volatile unsigned int   *dmalp;
-
-#ifdef DMA_DEBUG
-  printk("disable_dma(dmanr=%d)\n", dmanr);
-#endif
-
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-
-  /* Turn off external requests, and stop any DMA in progress */
-  dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN;
-  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
-}
-
-/*
- * Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while interrupts are disabled! ---
- *
- * This is a NOP for ColdFire. Provide a stub for compatibility.
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
-
-  volatile unsigned int   *dmalp;
-  volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
-#endif
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-
-  // Clear config errors
-  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET; 
-
-  // Set command register
-  dmalp[MCFDMA_DMR] =
-    MCFDMA_DMR_RQM_DUAL |         // Mandatory Request Mode setting
-    MCFDMA_DMR_DSTT_SD  |         // Set up addressing types; set to supervisor-data.
-    MCFDMA_DMR_SRCT_SD  |         // Set up addressing types; set to supervisor-data. 
-    // source static-address-mode
-    ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) |
-    // dest static-address-mode
-    ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) |
-    // burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272
-    (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) |
-    (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF);
-    
-  dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN;   /* Enable completion interrupts */
-  
-#ifdef DEBUG_DMA
-  printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__,
-         dmanr, (int) &dmalp[MCFDMA_DMR], dmabp[MCFDMA_DMR],
-	 (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]);
-#endif
-}
-
-/* Set transfer address for specific DMA channel */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
-  volatile unsigned int   *dmalp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-
-  // Determine which address registers are used for memory/device accesses
-  if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) {
-    // Source incrementing, must be memory
-    dmalp[MCFDMA_DSAR] = a;
-    // Set dest address, must be device
-    dmalp[MCFDMA_DDAR] = dma_device_address[dmanr];
-  } else {
-    // Destination incrementing, must be memory
-    dmalp[MCFDMA_DDAR] = a;
-    // Set source address, must be device
-    dmalp[MCFDMA_DSAR] = dma_device_address[dmanr];
-  }
-
-#ifdef DEBUG_DMA
-  printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
-	__FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DMR], dmawp[MCFDMA_DMR],
-	(int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR],
-	(int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]);
-#endif
-}
-
-/*
- * Specific for Coldfire - sets device address.
- * Should be called after the mode set call, and before set DMA address.
- */
-static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
-{
-#ifdef DMA_DEBUG
-  printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
-  dma_device_address[dmanr] = a;
-}
-
-/*
- * NOTE 2: "count" represents _bytes_.
- *
- * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
-  volatile unsigned int *dmalp;
-  
-#ifdef DMA_DEBUG
-  printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
-#endif
-
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-  dmalp[MCFDMA_DBCR] = count;
-}
-
-/*
- * Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
-  volatile unsigned int *dmalp;
-  unsigned int count;
-
-#ifdef DMA_DEBUG
-  printk("get_dma_residue(dmanr=%d)\n", dmanr);
-#endif
-
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-  count = dmalp[MCFDMA_DBCR];
-  return(count);
-}
-
-#endif /* !defined(CONFIG_M5272) */
-#endif /* CONFIG_COLDFIRE */
- 
-#define MAX_DMA_CHANNELS 8
-
-/* Don't define MAX_DMA_ADDRESS; it's useless on the m68k/coldfire and any
-   occurrence should be flagged as an error.  */
-/* under 2.4 it is actually needed by the new bootmem allocator */
-#define MAX_DMA_ADDRESS PAGE_OFFSET
-
-/* These are in kernel/dma.c: */
-extern int request_dma(unsigned int dmanr, const char *device_id);	/* reserve a DMA channel */
-extern void free_dma(unsigned int dmanr);	/* release it again */
- 
-#endif /* _M68K_DMA_H */
diff --git a/arch/m68knommu/include/asm/elf.h b/arch/m68knommu/include/asm/elf.h
deleted file mode 100644
index b8046837f384..000000000000
--- a/arch/m68knommu/include/asm/elf.h
+++ /dev/null
@@ -1,110 +0,0 @@
-#ifndef __ASMm68k_ELF_H
-#define __ASMm68k_ELF_H
-
-/*
- * ELF register definitions..
- */
-
-#include <asm/ptrace.h>
-#include <asm/user.h>
-
-/*
- * 68k ELF relocation types
- */
-#define R_68K_NONE  0
-#define R_68K_32    1
-#define R_68K_16    2
-#define R_68K_8     3
-#define R_68K_PC32  4
-#define R_68K_PC16  5
-#define R_68K_PC8   6
-#define R_68K_GOT32 7
-#define R_68K_GOT16 8
-#define R_68K_GOT8  9
-#define R_68K_GOT32O    10
-#define R_68K_GOT16O    11
-#define R_68K_GOT8O 12
-#define R_68K_PLT32 13
-#define R_68K_PLT16 14
-#define R_68K_PLT8  15
-#define R_68K_PLT32O    16
-#define R_68K_PLT16O    17
-#define R_68K_PLT8O 18
-#define R_68K_COPY  19
-#define R_68K_GLOB_DAT  20
-#define R_68K_JMP_SLOT  21
-#define R_68K_RELATIVE  22
-
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_m68kfp_struct elf_fpregset_t;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) ((x)->e_machine == EM_68K)
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS	ELFCLASS32
-#define ELF_DATA	ELFDATA2MSB
-#define ELF_ARCH	EM_68K
-
-/* For SVR4/m68k the function pointer to be registered with `atexit' is
-   passed in %a1.  Although my copy of the ABI has no such statement, it
-   is actually used on ASV.  */
-#define ELF_PLAT_INIT(_r, load_addr)	_r->a1 = 0
-
-#define USE_ELF_CORE_DUMP
-#define ELF_EXEC_PAGESIZE	4096
-
-/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
-   use of this is to invoke "./ld.so someprog" to test out a new version of
-   the loader.  We need to make sure that it is out of the way of the program
-   that it will "exec", and that there is sufficient room for the brk.  */
-
-#define ELF_ET_DYN_BASE         0xD0000000UL
-
-#define ELF_CORE_COPY_REGS(pr_reg, regs)				\
-	/* Bleech. */							\
-	pr_reg[0] = regs->d1;						\
-	pr_reg[1] = regs->d2;						\
-	pr_reg[2] = regs->d3;						\
-	pr_reg[3] = regs->d4;						\
-	pr_reg[4] = regs->d5;						\
-	pr_reg[7] = regs->a0;						\
-	pr_reg[8] = regs->a1;						\
-	pr_reg[14] = regs->d0;						\
-	pr_reg[15] = rdusp();						\
-	pr_reg[16] = 0 /* regs->orig_d0 */;				\
-	pr_reg[17] = regs->sr;						\
-	pr_reg[18] = regs->pc;						\
-	/* pr_reg[19] = (regs->format << 12) | regs->vector; */		\
-	{								\
-	  struct switch_stack *sw = ((struct switch_stack *)regs) - 1;	\
-	  pr_reg[5] = sw->d6;						\
-	  pr_reg[6] = sw->d7;						\
-	  pr_reg[10] = sw->a3;						\
-	  pr_reg[11] = sw->a4;						\
-	  pr_reg[12] = sw->a5;						\
-	  pr_reg[13] = sw->a6;						\
-	}
-
-/* This yields a mask that user programs can use to figure out what
-   instruction set this cpu supports.  */
-
-#define ELF_HWCAP	(0)
-
-/* This yields a string that ld.so will use to load implementation
-   specific libraries for optimization.  This is more specific in
-   intent than poking at uname or /proc/cpuinfo.  */
-
-#define ELF_PLATFORM  (NULL)
-
-#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
-
-#endif
diff --git a/arch/m68knommu/include/asm/elia.h b/arch/m68knommu/include/asm/elia.h
deleted file mode 100644
index e037d4e2de33..000000000000
--- a/arch/m68knommu/include/asm/elia.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/****************************************************************************/
-
-/*
- *	elia.h -- Lineo (formerly Moreton Bay) eLIA platform support.
- *
- *	(C) Copyright 1999-2000, Moreton Bay (www.moreton.com.au)
- *	(C) Copyright 1999-2000, Lineo (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef	elia_h
-#define	elia_h
-/****************************************************************************/
-
-#include <asm/coldfire.h>
-
-#ifdef CONFIG_eLIA
-
-/*
- *	The serial port DTR and DCD lines are also on the Parallel I/O
- *	as well, so define those too.
- */
-
-#define	eLIA_DCD1		0x0001
-#define	eLIA_DCD0		0x0002
-#define	eLIA_DTR1		0x0004
-#define	eLIA_DTR0		0x0008
-
-#define	eLIA_PCIRESET		0x0020
-
-/*
- *	Kernel macros to set and unset the LEDs.
- */
-#ifndef __ASSEMBLY__
-extern unsigned short	ppdata;
-#endif /* __ASSEMBLY__ */
-
-#endif	/* CONFIG_eLIA */
-
-/****************************************************************************/
-#endif	/* elia_h */
diff --git a/arch/m68knommu/include/asm/emergency-restart.h b/arch/m68knommu/include/asm/emergency-restart.h
deleted file mode 100644
index 108d8c48e42e..000000000000
--- a/arch/m68knommu/include/asm/emergency-restart.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/m68knommu/include/asm/entry.h b/arch/m68knommu/include/asm/entry.h
deleted file mode 100644
index c2553d26273d..000000000000
--- a/arch/m68knommu/include/asm/entry.h
+++ /dev/null
@@ -1,182 +0,0 @@
-#ifndef __M68KNOMMU_ENTRY_H
-#define __M68KNOMMU_ENTRY_H
-
-#include <asm/setup.h>
-#include <asm/page.h>
-
-/*
- * Stack layout in 'ret_from_exception':
- *
- * This allows access to the syscall arguments in registers d1-d5
- *
- *	 0(sp) - d1
- *	 4(sp) - d2
- *	 8(sp) - d3
- *	 C(sp) - d4
- *	10(sp) - d5
- *	14(sp) - a0
- *	18(sp) - a1
- *	1C(sp) - a2
- *	20(sp) - d0
- *	24(sp) - orig_d0
- *	28(sp) - stack adjustment
- *	2C(sp) - [ sr              ] [ format & vector ]
- *	2E(sp) - [ pc-hiword       ] [ sr              ]
- *	30(sp) - [ pc-loword       ] [ pc-hiword       ]
- *	32(sp) - [ format & vector ] [ pc-loword       ]
- *		  ^^^^^^^^^^^^^^^^^   ^^^^^^^^^^^^^^^^^
- *			M68K		  COLDFIRE
- */
-
-#define ALLOWINT 0xf8ff
-
-#ifdef __ASSEMBLY__
-
-/* process bits for task_struct.flags */
-PF_TRACESYS_OFF = 3
-PF_TRACESYS_BIT = 5
-PF_PTRACED_OFF = 3
-PF_PTRACED_BIT = 4
-PF_DTRACE_OFF = 1
-PF_DTRACE_BIT = 5
-
-LENOSYS = 38
-
-#define SWITCH_STACK_SIZE (6*4+4)	/* Includes return address */
-
-/*
- * This defines the normal kernel pt-regs layout.
- *
- * regs are a2-a6 and d6-d7 preserved by C code
- * the kernel doesn't mess with usp unless it needs to
- */
-
-#ifdef CONFIG_COLDFIRE
-/*
- * This is made a little more tricky on the ColdFire. There is no
- * separate kernel and user stack pointers. Need to artificially
- * construct a usp in software... When doing this we need to disable
- * interrupts, otherwise bad things could happen.
- */
-.macro SAVE_ALL
-	move	#0x2700,%sr		/* disable intrs */
-	btst	#5,%sp@(2)		/* from user? */
-	bnes	6f			/* no, skip */
-	movel	%sp,sw_usp		/* save user sp */
-	addql	#8,sw_usp		/* remove exception */
-	movel	sw_ksp,%sp		/* kernel sp */
-	subql	#8,%sp			/* room for exception */
-	clrl	%sp@-			/* stkadj */
-	movel	%d0,%sp@-		/* orig d0 */
-	movel	%d0,%sp@-		/* d0 */
-	lea	%sp@(-32),%sp		/* space for 8 regs */
-	moveml	%d1-%d5/%a0-%a2,%sp@
-	movel	sw_usp,%a0		/* get usp */
-	movel	%a0@-,%sp@(PT_PC)	/* copy exception program counter */
-	movel	%a0@-,%sp@(PT_FORMATVEC)/* copy exception format/vector/sr */
-	bra	7f
-	6:
-	clrl	%sp@-			/* stkadj */
-	movel	%d0,%sp@-		/* orig d0 */
-	movel	%d0,%sp@-		/* d0 */
-	lea	%sp@(-32),%sp		/* space for 8 regs */
-	moveml	%d1-%d5/%a0-%a2,%sp@
-	7:
-.endm
-
-.macro RESTORE_ALL
-	btst	#5,%sp@(PT_SR)		/* going user? */
-	bnes	8f			/* no, skip */
-	move	#0x2700,%sr		/* disable intrs */
-	movel	sw_usp,%a0		/* get usp */
-	movel	%sp@(PT_PC),%a0@-	/* copy exception program counter */
-	movel	%sp@(PT_FORMATVEC),%a0@-/* copy exception format/vector/sr */
-	moveml	%sp@,%d1-%d5/%a0-%a2
-	lea	%sp@(32),%sp		/* space for 8 regs */
-	movel	%sp@+,%d0
-	addql	#4,%sp			/* orig d0 */
-	addl	%sp@+,%sp		/* stkadj */
-	addql	#8,%sp			/* remove exception */
-	movel	%sp,sw_ksp		/* save ksp */
-	subql	#8,sw_usp		/* set exception */
-	movel	sw_usp,%sp		/* restore usp */
-	rte
-	8:
-	moveml	%sp@,%d1-%d5/%a0-%a2
-	lea	%sp@(32),%sp		/* space for 8 regs */
-	movel	%sp@+,%d0
-	addql	#4,%sp			/* orig d0 */
-	addl	%sp@+,%sp		/* stkadj */
-	rte
-.endm
-
-/*
- * Quick exception save, use current stack only.
- */
-.macro SAVE_LOCAL
-	move	#0x2700,%sr		/* disable intrs */
-	clrl	%sp@-			/* stkadj */
-	movel	%d0,%sp@-		/* orig d0 */
-	movel	%d0,%sp@-		/* d0 */
-	lea	%sp@(-32),%sp		/* space for 8 regs */
-	moveml	%d1-%d5/%a0-%a2,%sp@
-.endm
-
-.macro RESTORE_LOCAL
-	moveml	%sp@,%d1-%d5/%a0-%a2
-	lea	%sp@(32),%sp		/* space for 8 regs */
-	movel	%sp@+,%d0
-	addql	#4,%sp			/* orig d0 */
-	addl	%sp@+,%sp		/* stkadj */
-	rte
-.endm
-
-.macro SAVE_SWITCH_STACK
-	lea	%sp@(-24),%sp		/* 6 regs */
-	moveml	%a3-%a6/%d6-%d7,%sp@
-.endm
-
-.macro RESTORE_SWITCH_STACK
-	moveml	%sp@,%a3-%a6/%d6-%d7
-	lea	%sp@(24),%sp		/* 6 regs */
-.endm
-
-/*
- * Software copy of the user and kernel stack pointers... Ugh...
- * Need these to get around ColdFire not having separate kernel
- * and user stack pointers.
- */
-.globl sw_usp
-.globl sw_ksp
-
-#else /* !CONFIG_COLDFIRE */
-
-/*
- * Standard 68k interrupt entry and exit macros.
- */
-.macro SAVE_ALL
-	clrl	%sp@-			/* stkadj */
-	movel	%d0,%sp@-		/* orig d0 */
-	movel	%d0,%sp@-		/* d0 */
-	moveml	%d1-%d5/%a0-%a2,%sp@-
-.endm
-
-.macro RESTORE_ALL
-	moveml	%sp@+,%a0-%a2/%d1-%d5
-	movel	%sp@+,%d0
-	addql	#4,%sp			/* orig d0 */
-	addl	%sp@+,%sp		/* stkadj */
-	rte
-.endm
-
-.macro SAVE_SWITCH_STACK
-	moveml	%a3-%a6/%d6-%d7,%sp@-
-.endm
-
-.macro RESTORE_SWITCH_STACK
-	moveml	%sp@+,%a3-%a6/%d6-%d7
-.endm
-
-#endif /* !CONFIG_COLDFIRE */
-#endif /* __ASSEMBLY__ */
-#endif /* __M68KNOMMU_ENTRY_H */
diff --git a/arch/m68knommu/include/asm/errno.h b/arch/m68knommu/include/asm/errno.h
deleted file mode 100644
index 7e8c22b9a5e6..000000000000
--- a/arch/m68knommu/include/asm/errno.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/errno.h>
diff --git a/arch/m68knommu/include/asm/fb.h b/arch/m68knommu/include/asm/fb.h
deleted file mode 100644
index c7df38030992..000000000000
--- a/arch/m68knommu/include/asm/fb.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-#include <linux/fb.h>
-
-#define fb_pgprotect(...) do {} while (0)
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
-	return 0;
-}
-
-#endif /* _ASM_FB_H_ */
diff --git a/arch/m68knommu/include/asm/fcntl.h b/arch/m68knommu/include/asm/fcntl.h
deleted file mode 100644
index f6a552cda4cd..000000000000
--- a/arch/m68knommu/include/asm/fcntl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/fcntl.h>
diff --git a/arch/m68knommu/include/asm/flat.h b/arch/m68knommu/include/asm/flat.h
deleted file mode 100644
index 814b5174a8e0..000000000000
--- a/arch/m68knommu/include/asm/flat.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * include/asm-m68knommu/flat.h -- uClinux flat-format executables
- */
-
-#ifndef __M68KNOMMU_FLAT_H__
-#define __M68KNOMMU_FLAT_H__
-
-#define	flat_stack_align(sp)			/* nothing needed */
-#define	flat_argvp_envp_on_stack()		1
-#define	flat_old_ram_flag(flags)		(flags)
-#define	flat_reloc_valid(reloc, size)		((reloc) <= (size))
-#define	flat_get_addr_from_rp(rp, relval, flags, p)	get_unaligned(rp)
-#define	flat_put_addr_at_rp(rp, val, relval)	put_unaligned(val,rp)
-#define	flat_get_relocate_addr(rel)		(rel)
-#define	flat_set_persistent(relval, p)		0
-
-#endif /* __M68KNOMMU_FLAT_H__ */
diff --git a/arch/m68knommu/include/asm/fpu.h b/arch/m68knommu/include/asm/fpu.h
deleted file mode 100644
index b16b2e4fca2a..000000000000
--- a/arch/m68knommu/include/asm/fpu.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __M68KNOMMU_FPU_H
-#define __M68KNOMMU_FPU_H
-
-
-/*
- * MAX floating point unit state size (FSAVE/FRESTORE)
- */
-#if defined(CONFIG_M68020) || defined(CONFIG_M68030)
-#define FPSTATESIZE (216/sizeof(unsigned char))
-#elif defined(CONFIG_M68040)
-#define FPSTATESIZE (96/sizeof(unsigned char))
-#elif defined(CONFIG_M68KFPU_EMU)
-#define FPSTATESIZE (28/sizeof(unsigned char))
-#elif defined(CONFIG_M68060)
-#define FPSTATESIZE (12/sizeof(unsigned char))
-#else
-/* Assume no FP unit present then... */
-#define FPSTATESIZE (2) /* dummy size */
-#endif
-
-#endif /* __M68K_FPU_H */
diff --git a/arch/m68knommu/include/asm/futex.h b/arch/m68knommu/include/asm/futex.h
deleted file mode 100644
index 6a332a9f099c..000000000000
--- a/arch/m68knommu/include/asm/futex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
-
-#include <asm-generic/futex.h>
-
-#endif
diff --git a/arch/m68knommu/include/asm/hardirq.h b/arch/m68knommu/include/asm/hardirq.h
deleted file mode 100644
index bfad28149a49..000000000000
--- a/arch/m68knommu/include/asm/hardirq.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef __M68K_HARDIRQ_H
-#define __M68K_HARDIRQ_H
-
-#include <linux/cache.h>
-#include <linux/threads.h>
-#include <asm/irq.h>
-
-typedef struct {
-	unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
-
-#define HARDIRQ_BITS	8
-
-/*
- * The hardirq mask has to be large enough to have
- * space for potentially all IRQ sources in the system
- * nesting on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
-void ack_bad_irq(unsigned int irq);
-
-#endif /* __M68K_HARDIRQ_H */
diff --git a/arch/m68knommu/include/asm/hw_irq.h b/arch/m68knommu/include/asm/hw_irq.h
deleted file mode 100644
index f3ec9e5ae049..000000000000
--- a/arch/m68knommu/include/asm/hw_irq.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __M68KNOMMU_HW_IRQ_H__
-#define __M68KNOMMU_HW_IRQ_H__
-
-#endif /* __M68KNOMMU_HW_IRQ_H__ */
diff --git a/arch/m68knommu/include/asm/hwtest.h b/arch/m68knommu/include/asm/hwtest.h
deleted file mode 100644
index 700626a1b1bf..000000000000
--- a/arch/m68knommu/include/asm/hwtest.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/hwtest.h>
diff --git a/arch/m68knommu/include/asm/io.h b/arch/m68knommu/include/asm/io.h
deleted file mode 100644
index 6adef1ee2082..000000000000
--- a/arch/m68knommu/include/asm/io.h
+++ /dev/null
@@ -1,194 +0,0 @@
-#ifndef _M68KNOMMU_IO_H
-#define _M68KNOMMU_IO_H
-
-#ifdef __KERNEL__
-
-
-/*
- * These are for ISA/PCI shared memory _only_ and should never be used
- * on any other type of memory, including Zorro memory. They are meant to
- * access the bus in the bus byte order which is little-endian!.
- *
- * readX/writeX() are used to access memory mapped devices. On some
- * architectures the memory mapped IO stuff needs to be accessed
- * differently. On the m68k architecture, we just read/write the
- * memory location directly.
- */
-/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
- * two accesses to memory, which may be undesireable for some devices.
- */
-
-/*
- * swap functions are sometimes needed to interface little-endian hardware
- */
-static inline unsigned short _swapw(volatile unsigned short v)
-{
-    return ((v << 8) | (v >> 8));
-}
-
-static inline unsigned int _swapl(volatile unsigned long v)
-{
-    return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24));
-}
-
-#define readb(addr) \
-    ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
-#define readw(addr) \
-    ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
-#define readl(addr) \
-    ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; })
-
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-
-#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b))
-#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b))
-#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b))
-
-#define __raw_readb readb
-#define __raw_readw readw
-#define __raw_readl readl
-#define __raw_writeb writeb
-#define __raw_writew writew
-#define __raw_writel writel
-
-static inline void io_outsb(unsigned int addr, void *buf, int len)
-{
-	volatile unsigned char *ap = (volatile unsigned char *) addr;
-	unsigned char *bp = (unsigned char *) buf;
-	while (len--)
-		*ap = *bp++;
-}
-
-static inline void io_outsw(unsigned int addr, void *buf, int len)
-{
-	volatile unsigned short *ap = (volatile unsigned short *) addr;
-	unsigned short *bp = (unsigned short *) buf;
-	while (len--)
-		*ap = _swapw(*bp++);
-}
-
-static inline void io_outsl(unsigned int addr, void *buf, int len)
-{
-	volatile unsigned int *ap = (volatile unsigned int *) addr;
-	unsigned int *bp = (unsigned int *) buf;
-	while (len--)
-		*ap = _swapl(*bp++);
-}
-
-static inline void io_insb(unsigned int addr, void *buf, int len)
-{
-	volatile unsigned char *ap = (volatile unsigned char *) addr;
-	unsigned char *bp = (unsigned char *) buf;
-	while (len--)
-		*bp++ = *ap;
-}
-
-static inline void io_insw(unsigned int addr, void *buf, int len)
-{
-	volatile unsigned short *ap = (volatile unsigned short *) addr;
-	unsigned short *bp = (unsigned short *) buf;
-	while (len--)
-		*bp++ = _swapw(*ap);
-}
-
-static inline void io_insl(unsigned int addr, void *buf, int len)
-{
-	volatile unsigned int *ap = (volatile unsigned int *) addr;
-	unsigned int *bp = (unsigned int *) buf;
-	while (len--)
-		*bp++ = _swapl(*ap);
-}
-
-#define mmiowb()
-
-/*
- *	make the short names macros so specific devices
- *	can override them as required
- */
-
-#define memset_io(a,b,c)	memset((void *)(a),(b),(c))
-#define memcpy_fromio(a,b,c)	memcpy((a),(void *)(b),(c))
-#define memcpy_toio(a,b,c)	memcpy((void *)(a),(b),(c))
-
-#define inb(addr)    readb(addr)
-#define inw(addr)    readw(addr)
-#define inl(addr)    readl(addr)
-#define outb(x,addr) ((void) writeb(x,addr))
-#define outw(x,addr) ((void) writew(x,addr))
-#define outl(x,addr) ((void) writel(x,addr))
-
-#define inb_p(addr)    inb(addr)
-#define inw_p(addr)    inw(addr)
-#define inl_p(addr)    inl(addr)
-#define outb_p(x,addr) outb(x,addr)
-#define outw_p(x,addr) outw(x,addr)
-#define outl_p(x,addr) outl(x,addr)
-
-#define outsb(a,b,l) io_outsb(a,b,l)
-#define outsw(a,b,l) io_outsw(a,b,l)
-#define outsl(a,b,l) io_outsl(a,b,l)
-
-#define insb(a,b,l) io_insb(a,b,l)
-#define insw(a,b,l) io_insw(a,b,l)
-#define insl(a,b,l) io_insl(a,b,l)
-
-#define IO_SPACE_LIMIT 0xffff
-
-
-/* Values for nocacheflag and cmode */
-#define IOMAP_FULL_CACHING		0
-#define IOMAP_NOCACHE_SER		1
-#define IOMAP_NOCACHE_NONSER		2
-#define IOMAP_WRITETHROUGH		3
-
-extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag);
-extern void __iounmap(void *addr, unsigned long size);
-
-static inline void *ioremap(unsigned long physaddr, unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-static inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
-}
-static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
-}
-
-extern void iounmap(void *addr);
-
-/* Pages to physical address... */
-#define page_to_phys(page)      ((page - mem_map) << PAGE_SHIFT)
-#define page_to_bus(page)       ((page - mem_map) << PAGE_SHIFT)
-
-/*
- * Macros used for converting between virtual and physical mappings.
- */
-#define phys_to_virt(vaddr)	((void *) (vaddr))
-#define virt_to_phys(vaddr)	((unsigned long) (vaddr))
-
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
-
-#endif /* __KERNEL__ */
-
-#endif /* _M68KNOMMU_IO_H */
diff --git a/arch/m68knommu/include/asm/ioctl.h b/arch/m68knommu/include/asm/ioctl.h
deleted file mode 100644
index b279fe06dfe5..000000000000
--- a/arch/m68knommu/include/asm/ioctl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ioctl.h>
diff --git a/arch/m68knommu/include/asm/ioctls.h b/arch/m68knommu/include/asm/ioctls.h
deleted file mode 100644
index 0b1eb4d85059..000000000000
--- a/arch/m68knommu/include/asm/ioctls.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/ioctls.h>
diff --git a/arch/m68knommu/include/asm/ipcbuf.h b/arch/m68knommu/include/asm/ipcbuf.h
deleted file mode 100644
index e4a7be6dd706..000000000000
--- a/arch/m68knommu/include/asm/ipcbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/ipcbuf.h>
diff --git a/arch/m68knommu/include/asm/irq.h b/arch/m68knommu/include/asm/irq.h
deleted file mode 100644
index 9373c31ac87d..000000000000
--- a/arch/m68knommu/include/asm/irq.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef _M68KNOMMU_IRQ_H_
-#define _M68KNOMMU_IRQ_H_
-
-#ifdef CONFIG_COLDFIRE
-/*
- * On the ColdFire we keep track of all vectors. That way drivers
- * can register whatever vector number they wish, and we can deal
- * with it.
- */
-#define	SYS_IRQS	256
-#define	NR_IRQS		SYS_IRQS
-
-#else
-
-/*
- * # of m68k interrupts
- */
-#define SYS_IRQS	8
-#define NR_IRQS		(24 + SYS_IRQS)
-
-#endif /* CONFIG_COLDFIRE */
-
-
-#define irq_canonicalize(irq)	(irq)
-
-#endif /* _M68KNOMMU_IRQ_H_ */
diff --git a/arch/m68knommu/include/asm/irq_regs.h b/arch/m68knommu/include/asm/irq_regs.h
deleted file mode 100644
index 3dd9c0b70270..000000000000
--- a/arch/m68knommu/include/asm/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/arch/m68knommu/include/asm/kdebug.h b/arch/m68knommu/include/asm/kdebug.h
deleted file mode 100644
index 6ece1b037665..000000000000
--- a/arch/m68knommu/include/asm/kdebug.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kdebug.h>
diff --git a/arch/m68knommu/include/asm/kmap_types.h b/arch/m68knommu/include/asm/kmap_types.h
deleted file mode 100644
index bfb6707575d1..000000000000
--- a/arch/m68knommu/include/asm/kmap_types.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __ASM_M68K_KMAP_TYPES_H
-#define __ASM_M68K_KMAP_TYPES_H
-
-enum km_type {
-	KM_BOUNCE_READ,
-	KM_SKB_SUNRPC_DATA,
-	KM_SKB_DATA_SOFTIRQ,
-	KM_USER0,
-	KM_USER1,
-	KM_BIO_SRC_IRQ,
-	KM_BIO_DST_IRQ,
-	KM_PTE0,
-	KM_PTE1,
-	KM_IRQ0,
-	KM_IRQ1,
-	KM_SOFTIRQ0,
-	KM_SOFTIRQ1,
-	KM_TYPE_NR
-};
-
-#endif
diff --git a/arch/m68knommu/include/asm/linkage.h b/arch/m68knommu/include/asm/linkage.h
deleted file mode 100644
index c288a19ff489..000000000000
--- a/arch/m68knommu/include/asm/linkage.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/linkage.h>
diff --git a/arch/m68knommu/include/asm/local.h b/arch/m68knommu/include/asm/local.h
deleted file mode 100644
index 84a39c1b86f8..000000000000
--- a/arch/m68knommu/include/asm/local.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __M68KNOMMU_LOCAL_H
-#define __M68KNOMMU_LOCAL_H
-
-#include <asm-generic/local.h>
-
-#endif /* __M68KNOMMU_LOCAL_H */
diff --git a/arch/m68knommu/include/asm/m5206sim.h b/arch/m68knommu/include/asm/m5206sim.h
deleted file mode 100644
index 7e3594dea88b..000000000000
--- a/arch/m68knommu/include/asm/m5206sim.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/****************************************************************************/
-
-/*
- *	m5206sim.h -- ColdFire 5206 System Integration Module support.
- *
- *	(C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
- * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
- */
-
-/****************************************************************************/
-#ifndef	m5206sim_h
-#define	m5206sim_h
-/****************************************************************************/
-
-
-/*
- *	Define the 5206 SIM register set addresses.
- */
-#define	MCFSIM_SIMR		0x03		/* SIM Config reg (r/w) */
-#define	MCFSIM_ICR1		0x14		/* Intr Ctrl reg 1 (r/w) */
-#define	MCFSIM_ICR2		0x15		/* Intr Ctrl reg 2 (r/w) */
-#define	MCFSIM_ICR3		0x16		/* Intr Ctrl reg 3 (r/w) */
-#define	MCFSIM_ICR4		0x17		/* Intr Ctrl reg 4 (r/w) */
-#define	MCFSIM_ICR5		0x18		/* Intr Ctrl reg 5 (r/w) */
-#define	MCFSIM_ICR6		0x19		/* Intr Ctrl reg 6 (r/w) */
-#define	MCFSIM_ICR7		0x1a		/* Intr Ctrl reg 7 (r/w) */
-#define	MCFSIM_ICR8		0x1b		/* Intr Ctrl reg 8 (r/w) */
-#define	MCFSIM_ICR9		0x1c		/* Intr Ctrl reg 9 (r/w) */
-#define	MCFSIM_ICR10		0x1d		/* Intr Ctrl reg 10 (r/w) */
-#define	MCFSIM_ICR11		0x1e		/* Intr Ctrl reg 11 (r/w) */
-#define	MCFSIM_ICR12		0x1f		/* Intr Ctrl reg 12 (r/w) */
-#define	MCFSIM_ICR13		0x20		/* Intr Ctrl reg 13 (r/w) */
-#ifdef CONFIG_M5206e
-#define	MCFSIM_ICR14		0x21		/* Intr Ctrl reg 14 (r/w) */
-#define	MCFSIM_ICR15		0x22		/* Intr Ctrl reg 15 (r/w) */
-#endif
-
-#define MCFSIM_IMR		0x36		/* Interrupt Mask reg (r/w) */
-#define MCFSIM_IPR		0x3a		/* Interrupt Pend reg (r/w) */
-
-#define	MCFSIM_RSR		0x40		/* Reset Status reg (r/w) */
-#define	MCFSIM_SYPCR		0x41		/* System Protection reg (r/w)*/
-
-#define	MCFSIM_SWIVR		0x42		/* SW Watchdog intr reg (r/w) */
-#define	MCFSIM_SWSR		0x43		/* SW Watchdog service (r/w) */
-
-#define	MCFSIM_DCRR		0x46		/* DRAM Refresh reg (r/w) */
-#define	MCFSIM_DCTR		0x4a		/* DRAM Timing reg (r/w) */
-#define	MCFSIM_DAR0		0x4c		/* DRAM 0 Address reg(r/w) */
-#define	MCFSIM_DMR0		0x50		/* DRAM 0 Mask reg (r/w) */
-#define	MCFSIM_DCR0		0x57		/* DRAM 0 Control reg (r/w) */
-#define	MCFSIM_DAR1		0x58		/* DRAM 1 Address reg (r/w) */
-#define	MCFSIM_DMR1		0x5c		/* DRAM 1 Mask reg (r/w) */
-#define	MCFSIM_DCR1		0x63		/* DRAM 1 Control reg (r/w) */
-
-#define	MCFSIM_CSAR0		0x64		/* CS 0 Address 0 reg (r/w) */
-#define	MCFSIM_CSMR0		0x68		/* CS 0 Mask 0 reg (r/w) */
-#define	MCFSIM_CSCR0		0x6e		/* CS 0 Control reg (r/w) */
-#define	MCFSIM_CSAR1		0x70		/* CS 1 Address reg (r/w) */
-#define	MCFSIM_CSMR1		0x74		/* CS 1 Mask reg (r/w) */
-#define	MCFSIM_CSCR1		0x7a		/* CS 1 Control reg (r/w) */
-#define	MCFSIM_CSAR2		0x7c		/* CS 2 Address reg (r/w) */
-#define	MCFSIM_CSMR2		0x80		/* CS 2 Mask reg (r/w) */
-#define	MCFSIM_CSCR2		0x86		/* CS 2 Control reg (r/w) */
-#define	MCFSIM_CSAR3		0x88		/* CS 3 Address reg (r/w) */
-#define	MCFSIM_CSMR3		0x8c		/* CS 3 Mask reg (r/w) */
-#define	MCFSIM_CSCR3		0x92		/* CS 3 Control reg (r/w) */
-#define	MCFSIM_CSAR4		0x94		/* CS 4 Address reg (r/w) */
-#define	MCFSIM_CSMR4		0x98		/* CS 4 Mask reg (r/w) */
-#define	MCFSIM_CSCR4		0x9e		/* CS 4 Control reg (r/w) */
-#define	MCFSIM_CSAR5		0xa0		/* CS 5 Address reg (r/w) */
-#define	MCFSIM_CSMR5		0xa4		/* CS 5 Mask reg (r/w) */
-#define	MCFSIM_CSCR5		0xaa		/* CS 5 Control reg (r/w) */
-#define	MCFSIM_CSAR6		0xac		/* CS 6 Address reg (r/w) */
-#define	MCFSIM_CSMR6		0xb0		/* CS 6 Mask reg (r/w) */
-#define	MCFSIM_CSCR6		0xb6		/* CS 6 Control reg (r/w) */
-#define	MCFSIM_CSAR7		0xb8		/* CS 7 Address reg (r/w) */
-#define	MCFSIM_CSMR7		0xbc		/* CS 7 Mask reg (r/w) */
-#define	MCFSIM_CSCR7		0xc2		/* CS 7 Control reg (r/w) */
-#define	MCFSIM_DMCR		0xc6		/* Default control */
-
-#ifdef CONFIG_M5206e
-#define	MCFSIM_PAR		0xca		/* Pin Assignment reg (r/w) */
-#else
-#define	MCFSIM_PAR		0xcb		/* Pin Assignment reg (r/w) */
-#endif
-
-#define	MCFSIM_PADDR		0x1c5		/* Parallel Direction (r/w) */
-#define	MCFSIM_PADAT		0x1c9		/* Parallel Port Value (r/w) */
-
-/*
- *	Some symbol defines for the Parallel Port Pin Assignment Register
- */
-#ifdef CONFIG_M5206e
-#define MCFSIM_PAR_DREQ0        0x100           /* Set to select DREQ0 input */
-                                                /* Clear to select T0 input */
-#define MCFSIM_PAR_DREQ1        0x200           /* Select DREQ1 input */
-                                                /* Clear to select T0 output */
-#endif
-
-/*
- *	Some symbol defines for the Interrupt Control Register
- */
-#define	MCFSIM_SWDICR		MCFSIM_ICR8	/* Watchdog timer ICR */
-#define	MCFSIM_TIMER1ICR	MCFSIM_ICR9	/* Timer 1 ICR */
-#define	MCFSIM_TIMER2ICR	MCFSIM_ICR10	/* Timer 2 ICR */
-#define	MCFSIM_UART1ICR		MCFSIM_ICR12	/* UART 1 ICR */
-#define	MCFSIM_UART2ICR		MCFSIM_ICR13	/* UART 2 ICR */
-#ifdef CONFIG_M5206e
-#define	MCFSIM_DMA1ICR		MCFSIM_ICR14	/* DMA 1 ICR */
-#define	MCFSIM_DMA2ICR		MCFSIM_ICR15	/* DMA 2 ICR */
-#endif
-
-#if defined(CONFIG_M5206e)
-#define	MCFSIM_IMR_MASKALL	0xfffe		/* All SIM intr sources */
-#endif
-
-/*
- *	Macro to get and set IMR register. It is 16 bits on the 5206.
- */
-#define	mcf_getimr()		\
-	*((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR))
-
-#define	mcf_setimr(imr)		\
-	*((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR)) = (imr)
-
-#define	mcf_getipr()		\
-	*((volatile unsigned short *) (MCF_MBAR + MCFSIM_IPR))
-
-/****************************************************************************/
-#endif	/* m5206sim_h */
diff --git a/arch/m68knommu/include/asm/m520xsim.h b/arch/m68knommu/include/asm/m520xsim.h
deleted file mode 100644
index 49d016e6391a..000000000000
--- a/arch/m68knommu/include/asm/m520xsim.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/****************************************************************************/
-
-/*
- *  m520xsim.h -- ColdFire 5207/5208 System Integration Module support.
- *
- *  (C) Copyright 2005, Intec Automation (mike@steroidmicros.com)
- */
-
-/****************************************************************************/
-#ifndef m520xsim_h
-#define m520xsim_h
-/****************************************************************************/
-
-
-/*
- *  Define the 5282 SIM register set addresses.
- */
-#define MCFICM_INTC0        0x48000     /* Base for Interrupt Ctrl 0 */
-#define MCFINTC_IPRH        0x00        /* Interrupt pending 32-63 */
-#define MCFINTC_IPRL        0x04        /* Interrupt pending 1-31 */
-#define MCFINTC_IMRH        0x08        /* Interrupt mask 32-63 */
-#define MCFINTC_IMRL        0x0c        /* Interrupt mask 1-31 */
-#define MCFINTC_INTFRCH     0x10        /* Interrupt force 32-63 */
-#define MCFINTC_INTFRCL     0x14        /* Interrupt force 1-31 */
-#define MCFINTC_ICR0        0x40        /* Base ICR register */
-
-#define MCFINT_VECBASE      64
-#define MCFINT_UART0        26          /* Interrupt number for UART0 */
-#define MCFINT_UART1        27          /* Interrupt number for UART1 */
-#define MCFINT_UART2        28          /* Interrupt number for UART2 */
-#define MCFINT_QSPI         31          /* Interrupt number for QSPI */
-#define MCFINT_PIT1         4           /* Interrupt number for PIT1 (PIT0 in processor) */
-
-/*
- *  SDRAM configuration registers.
- */
-#define MCFSIM_SDMR         0x000a8000	/* SDRAM Mode/Extended Mode Register */
-#define MCFSIM_SDCR         0x000a8004	/* SDRAM Control Register */
-#define MCFSIM_SDCFG1       0x000a8008	/* SDRAM Configuration Register 1 */
-#define MCFSIM_SDCFG2       0x000a800c	/* SDRAM Configuration Register 2 */
-#define MCFSIM_SDCS0        0x000a8110	/* SDRAM Chip Select 0 Configuration */
-#define MCFSIM_SDCS1        0x000a8114	/* SDRAM Chip Select 1 Configuration */
-
-
-#define MCF_GPIO_PAR_UART                   (0xA4036)
-#define MCF_GPIO_PAR_FECI2C                 (0xA4033)
-#define MCF_GPIO_PAR_FEC                    (0xA4038)
-
-#define MCF_GPIO_PAR_UART_PAR_URXD0         (0x0001)
-#define MCF_GPIO_PAR_UART_PAR_UTXD0         (0x0002)
-
-#define MCF_GPIO_PAR_UART_PAR_URXD1         (0x0040)
-#define MCF_GPIO_PAR_UART_PAR_UTXD1         (0x0080)
-
-#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2   (0x02)
-#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2   (0x04)
-
-#define ICR_INTRCONF		0x05
-#define MCFPIT_IMR		MCFINTC_IMRL
-#define MCFPIT_IMR_IBIT		(1 << MCFINT_PIT1)
-
-/****************************************************************************/
-#endif  /* m520xsim_h */
diff --git a/arch/m68knommu/include/asm/m523xsim.h b/arch/m68knommu/include/asm/m523xsim.h
deleted file mode 100644
index bf397313e93f..000000000000
--- a/arch/m68knommu/include/asm/m523xsim.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/****************************************************************************/
-
-/*
- *	m523xsim.h -- ColdFire 523x System Integration Module support.
- *
- *	(C) Copyright 2003-2005, Greg Ungerer <gerg@snapgear.com>
- */
-
-/****************************************************************************/
-#ifndef	m523xsim_h
-#define	m523xsim_h
-/****************************************************************************/
-
-
-/*
- *	Define the 523x SIM register set addresses.
- */
-#define	MCFICM_INTC0		0x0c00		/* Base for Interrupt Ctrl 0 */
-#define	MCFICM_INTC1		0x0d00		/* Base for Interrupt Ctrl 0 */
-#define	MCFINTC_IPRH		0x00		/* Interrupt pending 32-63 */
-#define	MCFINTC_IPRL		0x04		/* Interrupt pending 1-31 */
-#define	MCFINTC_IMRH		0x08		/* Interrupt mask 32-63 */
-#define	MCFINTC_IMRL		0x0c		/* Interrupt mask 1-31 */
-#define	MCFINTC_INTFRCH		0x10		/* Interrupt force 32-63 */
-#define	MCFINTC_INTFRCL		0x14		/* Interrupt force 1-31 */
-#define	MCFINTC_IRLR		0x18		/* */
-#define	MCFINTC_IACKL		0x19		/* */
-#define	MCFINTC_ICR0		0x40		/* Base ICR register */
-
-#define	MCFINT_VECBASE		64		/* Vector base number */
-#define	MCFINT_UART0		13		/* Interrupt number for UART0 */
-#define	MCFINT_PIT1		36		/* Interrupt number for PIT1 */
-#define MCFINT_QSPI		18		/* Interrupt number for QSPI */
-
-/*
- *	SDRAM configuration registers.
- */
-#define	MCFSIM_DCR		0x44		/* SDRAM control */
-#define	MCFSIM_DACR0		0x48		/* SDRAM base address 0 */
-#define	MCFSIM_DMR0		0x4c		/* SDRAM address mask 0 */
-#define	MCFSIM_DACR1		0x50		/* SDRAM base address 1 */
-#define	MCFSIM_DMR1		0x54		/* SDRAM address mask 1 */
-
-/****************************************************************************/
-#endif	/* m523xsim_h */
diff --git a/arch/m68knommu/include/asm/m5249sim.h b/arch/m68knommu/include/asm/m5249sim.h
deleted file mode 100644
index 366eb8602d2f..000000000000
--- a/arch/m68knommu/include/asm/m5249sim.h
+++ /dev/null
@@ -1,209 +0,0 @@
-/****************************************************************************/
-
-/*
- *	m5249sim.h -- ColdFire 5249 System Integration Module support.
- *
- *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
- */
-
-/****************************************************************************/
-#ifndef	m5249sim_h
-#define	m5249sim_h
-/****************************************************************************/
-
-/*
- *	Define the 5249 SIM register set addresses.
- */
-#define	MCFSIM_RSR		0x00		/* Reset Status reg (r/w) */
-#define	MCFSIM_SYPCR		0x01		/* System Protection reg (r/w)*/
-#define	MCFSIM_SWIVR		0x02		/* SW Watchdog intr reg (r/w) */
-#define	MCFSIM_SWSR		0x03		/* SW Watchdog service (r/w) */
-#define	MCFSIM_PAR		0x04		/* Pin Assignment reg (r/w) */
-#define	MCFSIM_IRQPAR		0x06		/* Interrupt Assignment reg (r/w) */
-#define	MCFSIM_MPARK		0x0C		/* BUS Master Control Reg*/
-#define	MCFSIM_IPR		0x40		/* Interrupt Pend reg (r/w) */
-#define	MCFSIM_IMR		0x44		/* Interrupt Mask reg (r/w) */
-#define	MCFSIM_AVR		0x4b		/* Autovector Ctrl reg (r/w) */
-#define	MCFSIM_ICR0		0x4c		/* Intr Ctrl reg 0 (r/w) */
-#define	MCFSIM_ICR1		0x4d		/* Intr Ctrl reg 1 (r/w) */
-#define	MCFSIM_ICR2		0x4e		/* Intr Ctrl reg 2 (r/w) */
-#define	MCFSIM_ICR3		0x4f		/* Intr Ctrl reg 3 (r/w) */
-#define	MCFSIM_ICR4		0x50		/* Intr Ctrl reg 4 (r/w) */
-#define	MCFSIM_ICR5		0x51		/* Intr Ctrl reg 5 (r/w) */
-#define	MCFSIM_ICR6		0x52		/* Intr Ctrl reg 6 (r/w) */
-#define	MCFSIM_ICR7		0x53		/* Intr Ctrl reg 7 (r/w) */
-#define	MCFSIM_ICR8		0x54		/* Intr Ctrl reg 8 (r/w) */
-#define	MCFSIM_ICR9		0x55		/* Intr Ctrl reg 9 (r/w) */
-#define	MCFSIM_ICR10		0x56		/* Intr Ctrl reg 10 (r/w) */
-#define	MCFSIM_ICR11		0x57		/* Intr Ctrl reg 11 (r/w) */
-
-#define MCFSIM_CSAR0		0x80		/* CS 0 Address 0 reg (r/w) */
-#define MCFSIM_CSMR0		0x84		/* CS 0 Mask 0 reg (r/w) */
-#define MCFSIM_CSCR0		0x8a		/* CS 0 Control reg (r/w) */
-#define MCFSIM_CSAR1		0x8c		/* CS 1 Address reg (r/w) */
-#define MCFSIM_CSMR1		0x90		/* CS 1 Mask reg (r/w) */
-#define MCFSIM_CSCR1		0x96		/* CS 1 Control reg (r/w) */
-#define MCFSIM_CSAR2		0x98		/* CS 2 Address reg (r/w) */
-#define MCFSIM_CSMR2		0x9c		/* CS 2 Mask reg (r/w) */
-#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
-#define MCFSIM_CSAR3		0xa4		/* CS 3 Address reg (r/w) */
-#define MCFSIM_CSMR3		0xa8		/* CS 3 Mask reg (r/w) */
-#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
-
-#define MCFSIM_DCR		0x100		/* DRAM Control reg (r/w) */
-#define MCFSIM_DACR0		0x108		/* DRAM 0 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR0		0x10c		/* DRAM 0 Mask reg (r/w) */
-#define MCFSIM_DACR1		0x110		/* DRAM 1 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR1		0x114		/* DRAM 1 Mask reg (r/w) */
-
-
-/*
- *	Some symbol defines for the above...
- */
-#define	MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
-#define	MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
-#define	MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
-#define	MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
-#define	MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
-#define	MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
-#define	MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
-#define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
-#define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
-
-/*
- *	General purpose IO registers (in MBAR2).
- */
-#define	MCFSIM2_GPIOREAD	0x0		/* GPIO read values */
-#define	MCFSIM2_GPIOWRITE	0x4		/* GPIO write values */
-#define	MCFSIM2_GPIOENABLE	0x8		/* GPIO enabled */
-#define	MCFSIM2_GPIOFUNC	0xc		/* GPIO function */
-#define	MCFSIM2_GPIO1READ	0xb0		/* GPIO1 read values */
-#define	MCFSIM2_GPIO1WRITE	0xb4		/* GPIO1 write values */
-#define	MCFSIM2_GPIO1ENABLE	0xb8		/* GPIO1 enabled */
-#define	MCFSIM2_GPIO1FUNC	0xbc		/* GPIO1 function */
-
-#define	MCFSIM2_GPIOINTSTAT	0xc0		/* GPIO interrupt status */
-#define	MCFSIM2_GPIOINTCLEAR	0xc0		/* GPIO interrupt clear */
-#define	MCFSIM2_GPIOINTENABLE	0xc4		/* GPIO interrupt enable */
-
-#define	MCFSIM2_INTLEVEL1	0x140		/* Interrupt level reg 1 */
-#define	MCFSIM2_INTLEVEL2	0x144		/* Interrupt level reg 2 */
-#define	MCFSIM2_INTLEVEL3	0x148		/* Interrupt level reg 3 */
-#define	MCFSIM2_INTLEVEL4	0x14c		/* Interrupt level reg 4 */
-#define	MCFSIM2_INTLEVEL5	0x150		/* Interrupt level reg 5 */
-#define	MCFSIM2_INTLEVEL6	0x154		/* Interrupt level reg 6 */
-#define	MCFSIM2_INTLEVEL7	0x158		/* Interrupt level reg 7 */
-#define	MCFSIM2_INTLEVEL8	0x15c		/* Interrupt level reg 8 */
-
-#define	MCFSIM2_DMAROUTE	0x188		/* DMA routing */
-
-#define	MCFSIM2_IDECONFIG1	0x18c		/* IDEconfig1 */
-#define	MCFSIM2_IDECONFIG2	0x190		/* IDEconfig2 */
-
-
-/*
- *	Macro to set IMR register. It is 32 bits on the 5249.
- */
-#define	MCFSIM_IMR_MASKALL	0x7fffe		/* All SIM intr sources */
-
-#define	mcf_getimr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
-
-#define	mcf_setimr(imr)		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
-
-#define	mcf_getipr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
-
-/****************************************************************************/
-
-#ifdef __ASSEMBLER__
-
-/*
- *	The M5249C3 board needs a little help getting all its SIM devices
- *	initialized at kernel start time. dBUG doesn't set much up, so
- *	we need to do it manually.
- */
-.macro m5249c3_setup
-	/*
-	 *	Set MBAR1 and MBAR2, just incase they are not set.
-	 */
-	movel	#0x10000001,%a0
-	movec	%a0,%MBAR			/* map MBAR region */
-	subql	#1,%a0				/* get MBAR address in a0 */
-
-	movel	#0x80000001,%a1
-	movec	%a1,#3086			/* map MBAR2 region */
-	subql	#1,%a1				/* get MBAR2 address in a1 */
-
-	/*
-	 *      Move secondary interrupts to base at 128.
-	 */
-	moveb	#0x80,%d0
-	moveb	%d0,0x16b(%a1)			/* interrupt base register */
-
-	/*
-	 *      Work around broken CSMR0/DRAM vector problem.
-	 */
-	movel	#0x001F0021,%d0			/* disable C/I bit */
-	movel	%d0,0x84(%a0)			/* set CSMR0 */
-
-	/*
-	 *	Disable the PLL firstly. (Who knows what state it is
-	 *	in here!).
-	 */
-	movel	0x180(%a1),%d0			/* get current PLL value */
-	andl	#0xfffffffe,%d0			/* PLL bypass first */
-	movel	%d0,0x180(%a1)			/* set PLL register */
-	nop
-
-#if CONFIG_CLOCK_FREQ == 140000000
-	/*
-	 *	Set initial clock frequency. This assumes M5249C3 board
-	 *	is fitted with 11.2896MHz crystal. It will program the
-	 *	PLL for 140MHz. Lets go fast :-)
-	 */
-	movel	#0x125a40f0,%d0			/* set for 140MHz */
-	movel	%d0,0x180(%a1)			/* set PLL register */
-	orl	#0x1,%d0
-	movel	%d0,0x180(%a1)			/* set PLL register */
-#endif
-
-	/*
-	 *	Setup CS1 for ethernet controller.
-	 *	(Setup as per M5249C3 doco).
-	 */
-	movel  #0xe0000000,%d0			/* CS1 mapped at 0xe0000000 */
-	movel  %d0,0x8c(%a0)
-	movel  #0x001f0021,%d0			/* CS1 size of 1Mb */
-	movel  %d0,0x90(%a0)
-	movew  #0x0080,%d0			/* CS1 = 16bit port, AA */
-	movew  %d0,0x96(%a0)
-
-	/*
-	 *	Setup CS2 for IDE interface.
-	 */
-	movel	#0x50000000,%d0			/* CS2 mapped at 0x50000000 */
-	movel	%d0,0x98(%a0)
-	movel	#0x001f0001,%d0			/* CS2 size of 1MB */
-	movel	%d0,0x9c(%a0)
-	movew	#0x0080,%d0			/* CS2 = 16bit, TA */
-	movew	%d0,0xa2(%a0)
-
-	movel	#0x00107000,%d0			/* IDEconfig1 */
-	movel	%d0,0x18c(%a1)
-	movel	#0x000c0400,%d0			/* IDEconfig2 */
-	movel	%d0,0x190(%a1)
-
-	movel	#0x00080000,%d0			/* GPIO19, IDE reset bit */
-	orl	%d0,0xc(%a1)			/* function GPIO19 */
-	orl	%d0,0x8(%a1)			/* enable GPIO19 as output */
-        orl	%d0,0x4(%a1)			/* de-assert IDE reset */
-.endm
-
-#define	PLATFORM_SETUP	m5249c3_setup
-
-#endif /* __ASSEMBLER__ */
-
-/****************************************************************************/
-#endif	/* m5249sim_h */
diff --git a/arch/m68knommu/include/asm/m5272sim.h b/arch/m68knommu/include/asm/m5272sim.h
deleted file mode 100644
index 6217edc21139..000000000000
--- a/arch/m68knommu/include/asm/m5272sim.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/****************************************************************************/
-
-/*
- *	m5272sim.h -- ColdFire 5272 System Integration Module support.
- *
- *	(C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
- * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
- */
-
-/****************************************************************************/
-#ifndef	m5272sim_h
-#define	m5272sim_h
-/****************************************************************************/
-
-
-/*
- *	Define the 5272 SIM register set addresses.
- */
-#define	MCFSIM_SCR		0x04		/* SIM Config reg (r/w) */
-#define	MCFSIM_SPR		0x06		/* System Protection reg (r/w)*/
-#define	MCFSIM_PMR		0x08		/* Power Management reg (r/w) */
-#define	MCFSIM_APMR		0x0e		/* Active Low Power reg (r/w) */
-#define	MCFSIM_DIR		0x10		/* Device Identity reg (r/w) */
-
-#define	MCFSIM_ICR1		0x20		/* Intr Ctrl reg 1 (r/w) */
-#define	MCFSIM_ICR2		0x24		/* Intr Ctrl reg 2 (r/w) */
-#define	MCFSIM_ICR3		0x28		/* Intr Ctrl reg 3 (r/w) */
-#define	MCFSIM_ICR4		0x2c		/* Intr Ctrl reg 4 (r/w) */
-
-#define MCFSIM_ISR		0x30		/* Interrupt Source reg (r/w) */
-#define MCFSIM_PITR		0x34		/* Interrupt Transition (r/w) */
-#define	MCFSIM_PIWR		0x38		/* Interrupt Wakeup reg (r/w) */
-#define	MCFSIM_PIVR		0x3f		/* Interrupt Vector reg (r/w( */
-
-#define	MCFSIM_WRRR		0x280		/* Watchdog reference (r/w) */
-#define	MCFSIM_WIRR		0x284		/* Watchdog interrupt (r/w) */
-#define	MCFSIM_WCR		0x288		/* Watchdog counter (r/w) */
-#define	MCFSIM_WER		0x28c		/* Watchdog event (r/w) */
-
-#define	MCFSIM_CSBR0		0x40		/* CS0 Base Address (r/w) */
-#define	MCFSIM_CSOR0		0x44		/* CS0 Option (r/w) */
-#define	MCFSIM_CSBR1		0x48		/* CS1 Base Address (r/w) */
-#define	MCFSIM_CSOR1		0x4c		/* CS1 Option (r/w) */
-#define	MCFSIM_CSBR2		0x50		/* CS2 Base Address (r/w) */
-#define	MCFSIM_CSOR2		0x54		/* CS2 Option (r/w) */
-#define	MCFSIM_CSBR3		0x58		/* CS3 Base Address (r/w) */
-#define	MCFSIM_CSOR3		0x5c		/* CS3 Option (r/w) */
-#define	MCFSIM_CSBR4		0x60		/* CS4 Base Address (r/w) */
-#define	MCFSIM_CSOR4		0x64		/* CS4 Option (r/w) */
-#define	MCFSIM_CSBR5		0x68		/* CS5 Base Address (r/w) */
-#define	MCFSIM_CSOR5		0x6c		/* CS5 Option (r/w) */
-#define	MCFSIM_CSBR6		0x70		/* CS6 Base Address (r/w) */
-#define	MCFSIM_CSOR6		0x74		/* CS6 Option (r/w) */
-#define	MCFSIM_CSBR7		0x78		/* CS7 Base Address (r/w) */
-#define	MCFSIM_CSOR7		0x7c		/* CS7 Option (r/w) */
-
-#define	MCFSIM_SDCR		0x180		/* SDRAM Configuration (r/w) */
-#define	MCFSIM_SDTR		0x184		/* SDRAM Timing (r/w) */
-#define	MCFSIM_DCAR0		0x4c		/* DRAM 0 Address reg(r/w) */
-#define	MCFSIM_DCMR0		0x50		/* DRAM 0 Mask reg (r/w) */
-#define	MCFSIM_DCCR0		0x57		/* DRAM 0 Control reg (r/w) */
-#define	MCFSIM_DCAR1		0x58		/* DRAM 1 Address reg (r/w) */
-#define	MCFSIM_DCMR1		0x5c		/* DRAM 1 Mask reg (r/w) */
-#define	MCFSIM_DCCR1		0x63		/* DRAM 1 Control reg (r/w) */
-
-#define	MCFSIM_PACNT		0x80		/* Port A Control (r/w) */
-#define	MCFSIM_PADDR		0x84		/* Port A Direction (r/w) */
-#define	MCFSIM_PADAT		0x86		/* Port A Data (r/w) */
-#define	MCFSIM_PBCNT		0x88		/* Port B Control (r/w) */
-#define	MCFSIM_PBDDR		0x8c		/* Port B Direction (r/w) */
-#define	MCFSIM_PBDAT		0x8e		/* Port B Data (r/w) */
-#define	MCFSIM_PCDDR		0x94		/* Port C Direction (r/w) */
-#define	MCFSIM_PCDAT		0x96		/* Port C Data (r/w) */
-#define	MCFSIM_PDCNT		0x98		/* Port D Control (r/w) */
-
-
-/****************************************************************************/
-#endif	/* m5272sim_h */
diff --git a/arch/m68knommu/include/asm/m527xsim.h b/arch/m68knommu/include/asm/m527xsim.h
deleted file mode 100644
index 1f63ab3fb3e6..000000000000
--- a/arch/m68knommu/include/asm/m527xsim.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/****************************************************************************/
-
-/*
- *	m527xsim.h -- ColdFire 5270/5271 System Integration Module support.
- *
- *	(C) Copyright 2004, Greg Ungerer (gerg@snapgear.com)
- */
-
-/****************************************************************************/
-#ifndef	m527xsim_h
-#define	m527xsim_h
-/****************************************************************************/
-
-
-/*
- *	Define the 5270/5271 SIM register set addresses.
- */
-#define	MCFICM_INTC0		0x0c00		/* Base for Interrupt Ctrl 0 */
-#define	MCFICM_INTC1		0x0d00		/* Base for Interrupt Ctrl 1 */
-#define	MCFINTC_IPRH		0x00		/* Interrupt pending 32-63 */
-#define	MCFINTC_IPRL		0x04		/* Interrupt pending 1-31 */
-#define	MCFINTC_IMRH		0x08		/* Interrupt mask 32-63 */
-#define	MCFINTC_IMRL		0x0c		/* Interrupt mask 1-31 */
-#define	MCFINTC_INTFRCH		0x10		/* Interrupt force 32-63 */
-#define	MCFINTC_INTFRCL		0x14		/* Interrupt force 1-31 */
-#define	MCFINTC_IRLR		0x18		/* */
-#define	MCFINTC_IACKL		0x19		/* */
-#define	MCFINTC_ICR0		0x40		/* Base ICR register */
-
-#define	MCFINT_VECBASE		64		/* Vector base number */
-#define	MCFINT_UART0		13		/* Interrupt number for UART0 */
-#define	MCFINT_UART1		14		/* Interrupt number for UART1 */
-#define	MCFINT_UART2		15		/* Interrupt number for UART2 */
-#define	MCFINT_PIT1		36		/* Interrupt number for PIT1 */
-
-/*
- *	SDRAM configuration registers.
- */
-#ifdef CONFIG_M5271
-#define	MCFSIM_DCR		0x40		/* SDRAM control */
-#define	MCFSIM_DACR0		0x48		/* SDRAM base address 0 */
-#define	MCFSIM_DMR0		0x4c		/* SDRAM address mask 0 */
-#define	MCFSIM_DACR1		0x50		/* SDRAM base address 1 */
-#define	MCFSIM_DMR1		0x54		/* SDRAM address mask 1 */
-#endif
-#ifdef CONFIG_M5275
-#define	MCFSIM_DMR		0x40		/* SDRAM mode */
-#define	MCFSIM_DCR		0x44		/* SDRAM control */
-#define	MCFSIM_DCFG1		0x48		/* SDRAM configuration 1 */
-#define	MCFSIM_DCFG2		0x4c		/* SDRAM configuration 2 */
-#define	MCFSIM_DBAR0		0x50		/* SDRAM base address 0 */
-#define	MCFSIM_DMR0		0x54		/* SDRAM address mask 0 */
-#define	MCFSIM_DBAR1		0x58		/* SDRAM base address 1 */
-#define	MCFSIM_DMR1		0x5c		/* SDRAM address mask 1 */
-#endif
-
-/*
- *	GPIO pins setups to enable the UARTs.
- */
-#ifdef CONFIG_M5271
-#define MCF_GPIO_PAR_UART	0x100048	/* PAR UART address */
-#define UART0_ENABLE_MASK	0x000f
-#define UART1_ENABLE_MASK	0x0ff0
-#define UART2_ENABLE_MASK	0x3000
-#endif
-#ifdef CONFIG_M5275
-#define MCF_GPIO_PAR_UART	0x10007c	/* PAR UART address */
-#define UART0_ENABLE_MASK	0x000f
-#define UART1_ENABLE_MASK	0x00f0
-#define UART2_ENABLE_MASK	0x3f00 
-#endif
-
-/****************************************************************************/
-#endif	/* m527xsim_h */
diff --git a/arch/m68knommu/include/asm/m528xsim.h b/arch/m68knommu/include/asm/m528xsim.h
deleted file mode 100644
index 28bf783a5d6d..000000000000
--- a/arch/m68knommu/include/asm/m528xsim.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/****************************************************************************/
-
-/*
- *	m528xsim.h -- ColdFire 5280/5282 System Integration Module support.
- *
- *	(C) Copyright 2003, Greg Ungerer (gerg@snapgear.com)
- */
-
-/****************************************************************************/
-#ifndef	m528xsim_h
-#define	m528xsim_h
-/****************************************************************************/
-
-
-/*
- *	Define the 5280/5282 SIM register set addresses.
- */
-#define	MCFICM_INTC0		0x0c00		/* Base for Interrupt Ctrl 0 */
-#define	MCFICM_INTC1		0x0d00		/* Base for Interrupt Ctrl 0 */
-#define	MCFINTC_IPRH		0x00		/* Interrupt pending 32-63 */
-#define	MCFINTC_IPRL		0x04		/* Interrupt pending 1-31 */
-#define	MCFINTC_IMRH		0x08		/* Interrupt mask 32-63 */
-#define	MCFINTC_IMRL		0x0c		/* Interrupt mask 1-31 */
-#define	MCFINTC_INTFRCH		0x10		/* Interrupt force 32-63 */
-#define	MCFINTC_INTFRCL		0x14		/* Interrupt force 1-31 */
-#define	MCFINTC_IRLR		0x18		/* */
-#define	MCFINTC_IACKL		0x19		/* */
-#define	MCFINTC_ICR0		0x40		/* Base ICR register */
-
-#define	MCFINT_VECBASE		64		/* Vector base number */
-#define	MCFINT_UART0		13		/* Interrupt number for UART0 */
-#define	MCFINT_PIT1		55		/* Interrupt number for PIT1 */
-
-/*
- *	SDRAM configuration registers.
- */
-#define	MCFSIM_DCR		0x44		/* SDRAM control */
-#define	MCFSIM_DACR0		0x48		/* SDRAM base address 0 */
-#define	MCFSIM_DMR0		0x4c		/* SDRAM address mask 0 */
-#define	MCFSIM_DACR1		0x50		/* SDRAM base address 1 */
-#define	MCFSIM_DMR1		0x54		/* SDRAM address mask 1 */
-
-/*
- *	Derek Cheung - 6 Feb 2005
- *		add I2C and QSPI register definition using Freescale's MCF5282
- */
-/* set Port AS pin for I2C or UART */
-#define MCF5282_GPIO_PASPAR     (volatile u16 *) (MCF_IPSBAR + 0x00100056)
-
-/* Port UA Pin Assignment Register (8 Bit) */
-#define MCF5282_GPIO_PUAPAR	0x10005C
-
-/* Interrupt Mask Register Register Low */ 
-#define MCF5282_INTC0_IMRL      (volatile u32 *) (MCF_IPSBAR + 0x0C0C)
-/* Interrupt Control Register 7 */
-#define MCF5282_INTC0_ICR17     (volatile u8 *) (MCF_IPSBAR + 0x0C51)
-
-
-
-/*********************************************************************
-*
-* Inter-IC (I2C) Module
-*
-*********************************************************************/
-/* Read/Write access macros for general use */
-#define MCF5282_I2C_I2ADR       (volatile u8 *) (MCF_IPSBAR + 0x0300) // Address 
-#define MCF5282_I2C_I2FDR       (volatile u8 *) (MCF_IPSBAR + 0x0304) // Freq Divider
-#define MCF5282_I2C_I2CR        (volatile u8 *) (MCF_IPSBAR + 0x0308) // Control
-#define MCF5282_I2C_I2SR        (volatile u8 *) (MCF_IPSBAR + 0x030C) // Status
-#define MCF5282_I2C_I2DR        (volatile u8 *) (MCF_IPSBAR + 0x0310) // Data I/O
-
-/* Bit level definitions and macros */
-#define MCF5282_I2C_I2ADR_ADDR(x)                       (((x)&0x7F)<<0x01)
-
-#define MCF5282_I2C_I2FDR_IC(x)                         (((x)&0x3F))
-
-#define MCF5282_I2C_I2CR_IEN    (0x80)	// I2C enable
-#define MCF5282_I2C_I2CR_IIEN   (0x40)  // interrupt enable
-#define MCF5282_I2C_I2CR_MSTA   (0x20)  // master/slave mode
-#define MCF5282_I2C_I2CR_MTX    (0x10)  // transmit/receive mode
-#define MCF5282_I2C_I2CR_TXAK   (0x08)  // transmit acknowledge enable
-#define MCF5282_I2C_I2CR_RSTA   (0x04)  // repeat start
-
-#define MCF5282_I2C_I2SR_ICF    (0x80)  // data transfer bit
-#define MCF5282_I2C_I2SR_IAAS   (0x40)  // I2C addressed as a slave
-#define MCF5282_I2C_I2SR_IBB    (0x20)  // I2C bus busy
-#define MCF5282_I2C_I2SR_IAL    (0x10)  // aribitration lost
-#define MCF5282_I2C_I2SR_SRW    (0x04)  // slave read/write
-#define MCF5282_I2C_I2SR_IIF    (0x02)  // I2C interrupt
-#define MCF5282_I2C_I2SR_RXAK   (0x01)  // received acknowledge
-
-
-
-/*********************************************************************
-*
-* Queued Serial Peripheral Interface (QSPI) Module
-*
-*********************************************************************/
-/* Derek - 21 Feb 2005 */
-/* change to the format used in I2C */
-/* Read/Write access macros for general use */
-#define MCF5282_QSPI_QMR        MCF_IPSBAR + 0x0340
-#define MCF5282_QSPI_QDLYR      MCF_IPSBAR + 0x0344
-#define MCF5282_QSPI_QWR        MCF_IPSBAR + 0x0348
-#define MCF5282_QSPI_QIR        MCF_IPSBAR + 0x034C
-#define MCF5282_QSPI_QAR        MCF_IPSBAR + 0x0350
-#define MCF5282_QSPI_QDR        MCF_IPSBAR + 0x0354
-#define MCF5282_QSPI_QCR        MCF_IPSBAR + 0x0354
-
-/* Bit level definitions and macros */
-#define MCF5282_QSPI_QMR_MSTR                           (0x8000)
-#define MCF5282_QSPI_QMR_DOHIE                          (0x4000)
-#define MCF5282_QSPI_QMR_BITS_16                        (0x0000)
-#define MCF5282_QSPI_QMR_BITS_8                         (0x2000)
-#define MCF5282_QSPI_QMR_BITS_9                         (0x2400)
-#define MCF5282_QSPI_QMR_BITS_10                        (0x2800)
-#define MCF5282_QSPI_QMR_BITS_11                        (0x2C00)
-#define MCF5282_QSPI_QMR_BITS_12                        (0x3000)
-#define MCF5282_QSPI_QMR_BITS_13                        (0x3400)
-#define MCF5282_QSPI_QMR_BITS_14                        (0x3800)
-#define MCF5282_QSPI_QMR_BITS_15                        (0x3C00)
-#define MCF5282_QSPI_QMR_CPOL                           (0x0200)
-#define MCF5282_QSPI_QMR_CPHA                           (0x0100)
-#define MCF5282_QSPI_QMR_BAUD(x)                        (((x)&0x00FF))
-
-#define MCF5282_QSPI_QDLYR_SPE                          (0x80)
-#define MCF5282_QSPI_QDLYR_QCD(x)                       (((x)&0x007F)<<8)
-#define MCF5282_QSPI_QDLYR_DTL(x)                       (((x)&0x00FF))
-
-#define MCF5282_QSPI_QWR_HALT                           (0x8000)
-#define MCF5282_QSPI_QWR_WREN                           (0x4000)
-#define MCF5282_QSPI_QWR_WRTO                           (0x2000)
-#define MCF5282_QSPI_QWR_CSIV                           (0x1000)
-#define MCF5282_QSPI_QWR_ENDQP(x)                       (((x)&0x000F)<<8)
-#define MCF5282_QSPI_QWR_CPTQP(x)                       (((x)&0x000F)<<4)
-#define MCF5282_QSPI_QWR_NEWQP(x)                       (((x)&0x000F))
-
-#define MCF5282_QSPI_QIR_WCEFB                          (0x8000)
-#define MCF5282_QSPI_QIR_ABRTB                          (0x4000)
-#define MCF5282_QSPI_QIR_ABRTL                          (0x1000)
-#define MCF5282_QSPI_QIR_WCEFE                          (0x0800)
-#define MCF5282_QSPI_QIR_ABRTE                          (0x0400)
-#define MCF5282_QSPI_QIR_SPIFE                          (0x0100)
-#define MCF5282_QSPI_QIR_WCEF                           (0x0008)
-#define MCF5282_QSPI_QIR_ABRT                           (0x0004)
-#define MCF5282_QSPI_QIR_SPIF                           (0x0001)
-
-#define MCF5282_QSPI_QAR_ADDR(x)                        (((x)&0x003F))
-
-#define MCF5282_QSPI_QDR_COMMAND(x)                     (((x)&0xFF00))
-#define MCF5282_QSPI_QCR_DATA(x)                        (((x)&0x00FF)<<8)
-#define MCF5282_QSPI_QCR_CONT                           (0x8000)
-#define MCF5282_QSPI_QCR_BITSE                          (0x4000)
-#define MCF5282_QSPI_QCR_DT                             (0x2000)
-#define MCF5282_QSPI_QCR_DSCK                           (0x1000)
-#define MCF5282_QSPI_QCR_CS                             (((x)&0x000F)<<8)
-
-/****************************************************************************/
-#endif	/* m528xsim_h */
diff --git a/arch/m68knommu/include/asm/m5307sim.h b/arch/m68knommu/include/asm/m5307sim.h
deleted file mode 100644
index 5886728409c0..000000000000
--- a/arch/m68knommu/include/asm/m5307sim.h
+++ /dev/null
@@ -1,181 +0,0 @@
-/****************************************************************************/
-
-/*
- *	m5307sim.h -- ColdFire 5307 System Integration Module support.
- *
- *	(C) Copyright 1999,  Moreton Bay Ventures Pty Ltd.
- *	(C) Copyright 1999,  Lineo (www.lineo.com)
- *
- *      Modified by David W. Miller for the MCF5307 Eval Board.
- */
-
-/****************************************************************************/
-#ifndef	m5307sim_h
-#define	m5307sim_h
-/****************************************************************************/
-
-/*
- *	Define the 5307 SIM register set addresses.
- */
-#define	MCFSIM_RSR		0x00		/* Reset Status reg (r/w) */
-#define	MCFSIM_SYPCR		0x01		/* System Protection reg (r/w)*/
-#define	MCFSIM_SWIVR		0x02		/* SW Watchdog intr reg (r/w) */
-#define	MCFSIM_SWSR		0x03		/* SW Watchdog service (r/w) */
-#define	MCFSIM_PAR		0x04		/* Pin Assignment reg (r/w) */
-#define	MCFSIM_IRQPAR		0x06		/* Interrupt Assignment reg (r/w) */
-#define	MCFSIM_PLLCR		0x08		/* PLL Controll Reg*/
-#define	MCFSIM_MPARK		0x0C		/* BUS Master Control Reg*/
-#define	MCFSIM_IPR		0x40		/* Interrupt Pend reg (r/w) */
-#define	MCFSIM_IMR		0x44		/* Interrupt Mask reg (r/w) */
-#define	MCFSIM_AVR		0x4b		/* Autovector Ctrl reg (r/w) */
-#define	MCFSIM_ICR0		0x4c		/* Intr Ctrl reg 0 (r/w) */
-#define	MCFSIM_ICR1		0x4d		/* Intr Ctrl reg 1 (r/w) */
-#define	MCFSIM_ICR2		0x4e		/* Intr Ctrl reg 2 (r/w) */
-#define	MCFSIM_ICR3		0x4f		/* Intr Ctrl reg 3 (r/w) */
-#define	MCFSIM_ICR4		0x50		/* Intr Ctrl reg 4 (r/w) */
-#define	MCFSIM_ICR5		0x51		/* Intr Ctrl reg 5 (r/w) */
-#define	MCFSIM_ICR6		0x52		/* Intr Ctrl reg 6 (r/w) */
-#define	MCFSIM_ICR7		0x53		/* Intr Ctrl reg 7 (r/w) */
-#define	MCFSIM_ICR8		0x54		/* Intr Ctrl reg 8 (r/w) */
-#define	MCFSIM_ICR9		0x55		/* Intr Ctrl reg 9 (r/w) */
-#define	MCFSIM_ICR10		0x56		/* Intr Ctrl reg 10 (r/w) */
-#define	MCFSIM_ICR11		0x57		/* Intr Ctrl reg 11 (r/w) */
-
-#define MCFSIM_CSAR0		0x80		/* CS 0 Address 0 reg (r/w) */
-#define MCFSIM_CSMR0		0x84		/* CS 0 Mask 0 reg (r/w) */
-#define MCFSIM_CSCR0		0x8a		/* CS 0 Control reg (r/w) */
-#define MCFSIM_CSAR1		0x8c		/* CS 1 Address reg (r/w) */
-#define MCFSIM_CSMR1		0x90		/* CS 1 Mask reg (r/w) */
-#define MCFSIM_CSCR1		0x96		/* CS 1 Control reg (r/w) */
-
-#ifdef CONFIG_OLDMASK
-#define MCFSIM_CSBAR		0x98		/* CS Base Address reg (r/w) */
-#define MCFSIM_CSBAMR		0x9c		/* CS Base Mask reg (r/w) */
-#define MCFSIM_CSMR2		0x9e		/* CS 2 Mask reg (r/w) */
-#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
-#define MCFSIM_CSMR3		0xaa		/* CS 3 Mask reg (r/w) */
-#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
-#define MCFSIM_CSMR4		0xb6		/* CS 4 Mask reg (r/w) */
-#define MCFSIM_CSCR4		0xba		/* CS 4 Control reg (r/w) */
-#define MCFSIM_CSMR5		0xc2		/* CS 5 Mask reg (r/w) */
-#define MCFSIM_CSCR5		0xc6		/* CS 5 Control reg (r/w) */
-#define MCFSIM_CSMR6		0xce		/* CS 6 Mask reg (r/w) */
-#define MCFSIM_CSCR6		0xd2		/* CS 6 Control reg (r/w) */
-#define MCFSIM_CSMR7		0xda		/* CS 7 Mask reg (r/w) */
-#define MCFSIM_CSCR7		0xde		/* CS 7 Control reg (r/w) */
-#else
-#define MCFSIM_CSAR2		0x98		/* CS 2 Address reg (r/w) */
-#define MCFSIM_CSMR2		0x9c		/* CS 2 Mask reg (r/w) */
-#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
-#define MCFSIM_CSAR3		0xa4		/* CS 3 Address reg (r/w) */
-#define MCFSIM_CSMR3		0xa8		/* CS 3 Mask reg (r/w) */
-#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
-#define MCFSIM_CSAR4		0xb0		/* CS 4 Address reg (r/w) */
-#define MCFSIM_CSMR4		0xb4		/* CS 4 Mask reg (r/w) */
-#define MCFSIM_CSCR4		0xba		/* CS 4 Control reg (r/w) */
-#define MCFSIM_CSAR5		0xbc		/* CS 5 Address reg (r/w) */
-#define MCFSIM_CSMR5		0xc0		/* CS 5 Mask reg (r/w) */
-#define MCFSIM_CSCR5		0xc6		/* CS 5 Control reg (r/w) */
-#define MCFSIM_CSAR6		0xc8		/* CS 6 Address reg (r/w) */
-#define MCFSIM_CSMR6		0xcc		/* CS 6 Mask reg (r/w) */
-#define MCFSIM_CSCR6		0xd2		/* CS 6 Control reg (r/w) */
-#define MCFSIM_CSAR7		0xd4		/* CS 7 Address reg (r/w) */
-#define MCFSIM_CSMR7		0xd8		/* CS 7 Mask reg (r/w) */
-#define MCFSIM_CSCR7		0xde		/* CS 7 Control reg (r/w) */
-#endif /* CONFIG_OLDMASK */
-
-#define MCFSIM_DCR		0x100		/* DRAM Control reg (r/w) */
-#define MCFSIM_DACR0		0x108		/* DRAM 0 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR0		0x10c		/* DRAM 0 Mask reg (r/w) */
-#define MCFSIM_DACR1		0x110		/* DRAM 1 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR1		0x114		/* DRAM 1 Mask reg (r/w) */
-
-#define	MCFSIM_PADDR		0x244		/* Parallel Direction (r/w) */
-#define	MCFSIM_PADAT		0x248		/* Parallel Data (r/w) */
-
-
-/* Definition offset address for CS2-7  -- old mask 5307 */
-
-#define	MCF5307_CS2		(0x400000)
-#define	MCF5307_CS3		(0x600000)
-#define	MCF5307_CS4		(0x800000)
-#define	MCF5307_CS5		(0xA00000)
-#define	MCF5307_CS6		(0xC00000)
-#define	MCF5307_CS7		(0xE00000)
-
-
-/*
- *	Some symbol defines for the above...
- */
-#define	MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
-#define	MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
-#define	MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
-#define	MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
-#define	MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
-#define	MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
-#define	MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
-#define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
-#define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
-
-#if defined(CONFIG_M5307)
-#define	MCFSIM_IMR_MASKALL	0x3fffe		/* All SIM intr sources */
-#endif
-
-/*
- *	Macro to set IMR register. It is 32 bits on the 5307.
- */
-#define	mcf_getimr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
-
-#define	mcf_setimr(imr)		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
-
-#define	mcf_getipr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
-
-
-/*
- *	Some symbol defines for the Parallel Port Pin Assignment Register
- */
-#define MCFSIM_PAR_DREQ0        0x40            /* Set to select DREQ0 input */
-                                                /* Clear to select par I/O */
-#define MCFSIM_PAR_DREQ1        0x20            /* Select DREQ1 input */
-                                                /* Clear to select par I/O */
-
-/*
- *       Defines for the IRQPAR Register
- */
-#define IRQ5_LEVEL4	0x80
-#define IRQ3_LEVEL6	0x40
-#define IRQ1_LEVEL2	0x20
-
-
-/*
- *	Define the Cache register flags.
- */
-#define	CACR_EC			(1<<31)
-#define	CACR_ESB		(1<<29)
-#define	CACR_DPI		(1<<28)
-#define	CACR_HLCK		(1<<27)
-#define	CACR_CINVA		(1<<24)
-#define	CACR_DNFB		(1<<10)
-#define	CACR_DCM_WTHRU		(0<<8)
-#define	CACR_DCM_WBACK		(1<<8)
-#define	CACR_DCM_OFF_PRE	(2<<8)
-#define	CACR_DCM_OFF_IMP	(3<<8)
-#define	CACR_DW			(1<<5)
-
-#define	ACR_BASE_POS		24
-#define	ACR_MASK_POS		16
-#define	ACR_ENABLE		(1<<15)
-#define	ACR_USER		(0<<13)
-#define	ACR_SUPER		(1<<13)
-#define	ACR_ANY			(2<<13)
-#define	ACR_CM_WTHRU		(0<<5)
-#define	ACR_CM_WBACK		(1<<5)
-#define	ACR_CM_OFF_PRE		(2<<5)
-#define	ACR_CM_OFF_IMP		(3<<5)
-#define	ACR_WPROTECT		(1<<2)
-
-/****************************************************************************/
-#endif	/* m5307sim_h */
diff --git a/arch/m68knommu/include/asm/m532xsim.h b/arch/m68knommu/include/asm/m532xsim.h
deleted file mode 100644
index 1835fd20a82c..000000000000
--- a/arch/m68knommu/include/asm/m532xsim.h
+++ /dev/null
@@ -1,2238 +0,0 @@
-/****************************************************************************/
-
-/*
- *	m532xsim.h -- ColdFire 5329 registers
- */
-
-/****************************************************************************/
-#ifndef	m532xsim_h
-#define	m532xsim_h
-/****************************************************************************/
-
-#define MCF_REG32(x) (*(volatile unsigned long  *)(x))
-#define MCF_REG16(x) (*(volatile unsigned short *)(x))
-#define MCF_REG08(x) (*(volatile unsigned char  *)(x))
-
-#define MCFINT_VECBASE      64
-#define MCFINT_UART0        26          /* Interrupt number for UART0 */
-#define MCFINT_UART1        27          /* Interrupt number for UART1 */
-
-#define MCF_WTM_WCR	MCF_REG16(0xFC098000)
-
-/*
- *	Define the 532x SIM register set addresses.
- */
-#define	MCFSIM_IPRL		0xFC048004
-#define	MCFSIM_IPRH		0xFC048000
-#define	MCFSIM_IPR		MCFSIM_IPRL
-#define	MCFSIM_IMRL		0xFC04800C
-#define	MCFSIM_IMRH		0xFC048008
-#define	MCFSIM_IMR		MCFSIM_IMRL
-#define	MCFSIM_ICR0		0xFC048040	
-#define	MCFSIM_ICR1		0xFC048041	
-#define	MCFSIM_ICR2		0xFC048042	
-#define	MCFSIM_ICR3		0xFC048043	
-#define	MCFSIM_ICR4		0xFC048044	
-#define	MCFSIM_ICR5		0xFC048045	
-#define	MCFSIM_ICR6		0xFC048046	
-#define	MCFSIM_ICR7		0xFC048047	
-#define	MCFSIM_ICR8		0xFC048048	
-#define	MCFSIM_ICR9		0xFC048049	
-#define	MCFSIM_ICR10		0xFC04804A
-#define	MCFSIM_ICR11		0xFC04804B
-
-/*
- *	Some symbol defines for the above...
- */
-#define	MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
-#define	MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
-#define	MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
-#define	MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
-#define	MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
-#define	MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
-#define	MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
-#define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
-#define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
-
-
-#define	MCFSIM_IMR_MASKALL	0xFFFFFFFF	/* All SIM intr sources */
-
-#define MCFSIM_IMR_SIMR0	0xFC04801C
-#define MCFSIM_IMR_SIMR1	0xFC04C01C
-#define MCFSIM_IMR_CIMR0	0xFC04801D
-#define MCFSIM_IMR_CIMR1	0xFC04C01D
-
-#define MCFSIM_ICR_TIMER1	(0xFC048040+32)
-#define MCFSIM_ICR_TIMER2	(0xFC048040+33)
-
-
-/*
- *	Macro to set IMR register. It is 32 bits on the 5307.
- */
-#define	mcf_getimr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
-
-#define	mcf_setimr(imr)		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
-
-#define	mcf_getipr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
-
-#define	mcf_getiprl()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRL))
-
-#define	mcf_getiprh()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRH))
-
-
-#define mcf_enable_irq0(irq)		\
-	*((volatile unsigned char*) (MCFSIM_IMR_CIMR0)) = (irq);
-
-#define mcf_enable_irq1(irq)		\
-	*((volatile unsigned char*) (MCFSIM_IMR_CIMR1)) = (irq);
-
-#define mcf_disable_irq0(irq)		\
-	*((volatile unsigned char*) (MCFSIM_IMR_SIMR0)) = (irq);
-
-#define mcf_disable_irq1(irq)		\
-	*((volatile unsigned char*) (MCFSIM_IMR_SIMR1)) = (irq);
-
-/*
- *	Define the Cache register flags.
- */
-#define	CACR_EC			(1<<31)
-#define	CACR_ESB		(1<<29)
-#define	CACR_DPI		(1<<28)
-#define	CACR_HLCK		(1<<27)
-#define	CACR_CINVA		(1<<24)
-#define	CACR_DNFB		(1<<10)
-#define	CACR_DCM_WTHRU		(0<<8)
-#define	CACR_DCM_WBACK		(1<<8)
-#define	CACR_DCM_OFF_PRE	(2<<8)
-#define	CACR_DCM_OFF_IMP	(3<<8)
-#define	CACR_DW			(1<<5)
-
-#define	ACR_BASE_POS		24
-#define	ACR_MASK_POS		16
-#define	ACR_ENABLE		(1<<15)
-#define	ACR_USER		(0<<13)
-#define	ACR_SUPER		(1<<13)
-#define	ACR_ANY			(2<<13)
-#define	ACR_CM_WTHRU		(0<<5)
-#define	ACR_CM_WBACK		(1<<5)
-#define	ACR_CM_OFF_PRE		(2<<5)
-#define	ACR_CM_OFF_IMP		(3<<5)
-#define	ACR_WPROTECT		(1<<2)
-
-/*********************************************************************
- *
- * Inter-IC (I2C) Module
- *
- *********************************************************************/
-
-/* Read/Write access macros for general use */
-#define MCF532x_I2C_I2ADR       (volatile u8 *) (0xFC058000) // Address 
-#define MCF532x_I2C_I2FDR       (volatile u8 *) (0xFC058004) // Freq Divider
-#define MCF532x_I2C_I2CR        (volatile u8 *) (0xFC058008) // Control
-#define MCF532x_I2C_I2SR        (volatile u8 *) (0xFC05800C) // Status
-#define MCF532x_I2C_I2DR        (volatile u8 *) (0xFC058010) // Data I/O
-
-/* Bit level definitions and macros */
-#define MCF532x_I2C_I2ADR_ADDR(x)                       (((x)&0x7F)<<0x01)
-
-#define MCF532x_I2C_I2FDR_IC(x)                         (((x)&0x3F))
-
-#define MCF532x_I2C_I2CR_IEN    (0x80)	// I2C enable
-#define MCF532x_I2C_I2CR_IIEN   (0x40)  // interrupt enable
-#define MCF532x_I2C_I2CR_MSTA   (0x20)  // master/slave mode
-#define MCF532x_I2C_I2CR_MTX    (0x10)  // transmit/receive mode
-#define MCF532x_I2C_I2CR_TXAK   (0x08)  // transmit acknowledge enable
-#define MCF532x_I2C_I2CR_RSTA   (0x04)  // repeat start
-
-#define MCF532x_I2C_I2SR_ICF    (0x80)  // data transfer bit
-#define MCF532x_I2C_I2SR_IAAS   (0x40)  // I2C addressed as a slave
-#define MCF532x_I2C_I2SR_IBB    (0x20)  // I2C bus busy
-#define MCF532x_I2C_I2SR_IAL    (0x10)  // aribitration lost
-#define MCF532x_I2C_I2SR_SRW    (0x04)  // slave read/write
-#define MCF532x_I2C_I2SR_IIF    (0x02)  // I2C interrupt
-#define MCF532x_I2C_I2SR_RXAK   (0x01)  // received acknowledge
-
-#define MCF532x_PAR_FECI2C	(volatile u8 *) (0xFC0A4053)
-
-
-/*
- *	The M5329EVB board needs a help getting its devices initialized 
- *	at kernel start time if dBUG doesn't set it up (for example 
- *	it is not used), so we need to do it manually.
- */
-#ifdef __ASSEMBLER__
-.macro m5329EVB_setup
-	movel	#0xFC098000, %a7
-	movel	#0x0, (%a7)
-#define CORE_SRAM	0x80000000	
-#define CORE_SRAM_SIZE	0x8000
-	movel	#CORE_SRAM, %d0
-	addl	#0x221, %d0
-	movec	%d0,%RAMBAR1
-	movel	#CORE_SRAM, %sp
-	addl	#CORE_SRAM_SIZE, %sp
-	jsr	sysinit
-.endm
-#define	PLATFORM_SETUP	m5329EVB_setup
-
-#endif /* __ASSEMBLER__ */
-
-/*********************************************************************
- *
- * Chip Configuration Module (CCM)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_CCM_CCR               MCF_REG16(0xFC0A0004)
-#define MCF_CCM_RCON              MCF_REG16(0xFC0A0008)
-#define MCF_CCM_CIR               MCF_REG16(0xFC0A000A)
-#define MCF_CCM_MISCCR            MCF_REG16(0xFC0A0010)
-#define MCF_CCM_CDR               MCF_REG16(0xFC0A0012)
-#define MCF_CCM_UHCSR             MCF_REG16(0xFC0A0014)
-#define MCF_CCM_UOCSR             MCF_REG16(0xFC0A0016)
-
-/* Bit definitions and macros for MCF_CCM_CCR */
-#define MCF_CCM_CCR_RESERVED      (0x0001)
-#define MCF_CCM_CCR_PLL_MODE      (0x0003)
-#define MCF_CCM_CCR_OSC_MODE      (0x0005)
-#define MCF_CCM_CCR_BOOTPS(x)     (((x)&0x0003)<<3|0x0001)
-#define MCF_CCM_CCR_LOAD          (0x0021)
-#define MCF_CCM_CCR_LIMP          (0x0041)
-#define MCF_CCM_CCR_CSC(x)        (((x)&0x0003)<<8|0x0001)
-
-/* Bit definitions and macros for MCF_CCM_RCON */
-#define MCF_CCM_RCON_RESERVED     (0x0001)
-#define MCF_CCM_RCON_PLL_MODE     (0x0003)
-#define MCF_CCM_RCON_OSC_MODE     (0x0005)
-#define MCF_CCM_RCON_BOOTPS(x)    (((x)&0x0003)<<3|0x0001)
-#define MCF_CCM_RCON_LOAD         (0x0021)
-#define MCF_CCM_RCON_LIMP         (0x0041)
-#define MCF_CCM_RCON_CSC(x)       (((x)&0x0003)<<8|0x0001)
-
-/* Bit definitions and macros for MCF_CCM_CIR */
-#define MCF_CCM_CIR_PRN(x)        (((x)&0x003F)<<0)
-#define MCF_CCM_CIR_PIN(x)        (((x)&0x03FF)<<6)
-
-/* Bit definitions and macros for MCF_CCM_MISCCR */
-#define MCF_CCM_MISCCR_USBSRC     (0x0001)
-#define MCF_CCM_MISCCR_USBDIV     (0x0002)
-#define MCF_CCM_MISCCR_SSI_SRC    (0x0010)
-#define MCF_CCM_MISCCR_TIM_DMA   (0x0020)
-#define MCF_CCM_MISCCR_SSI_PUS    (0x0040)
-#define MCF_CCM_MISCCR_SSI_PUE    (0x0080)
-#define MCF_CCM_MISCCR_LCD_CHEN   (0x0100)
-#define MCF_CCM_MISCCR_LIMP       (0x1000)
-#define MCF_CCM_MISCCR_PLL_LOCK   (0x2000)
-
-/* Bit definitions and macros for MCF_CCM_CDR */
-#define MCF_CCM_CDR_SSIDIV(x)     (((x)&0x000F)<<0)
-#define MCF_CCM_CDR_LPDIV(x)      (((x)&0x000F)<<8)
-
-/* Bit definitions and macros for MCF_CCM_UHCSR */
-#define MCF_CCM_UHCSR_XPDE        (0x0001)
-#define MCF_CCM_UHCSR_UHMIE       (0x0002)
-#define MCF_CCM_UHCSR_WKUP        (0x0004)
-#define MCF_CCM_UHCSR_PORTIND(x)  (((x)&0x0003)<<14)
-
-/* Bit definitions and macros for MCF_CCM_UOCSR */
-#define MCF_CCM_UOCSR_XPDE        (0x0001)
-#define MCF_CCM_UOCSR_UOMIE       (0x0002)
-#define MCF_CCM_UOCSR_WKUP        (0x0004)
-#define MCF_CCM_UOCSR_PWRFLT      (0x0008)
-#define MCF_CCM_UOCSR_SEND        (0x0010)
-#define MCF_CCM_UOCSR_VVLD        (0x0020)
-#define MCF_CCM_UOCSR_BVLD        (0x0040)
-#define MCF_CCM_UOCSR_AVLD        (0x0080)
-#define MCF_CCM_UOCSR_DPPU        (0x0100)
-#define MCF_CCM_UOCSR_DCR_VBUS    (0x0200)
-#define MCF_CCM_UOCSR_CRG_VBUS    (0x0400)
-#define MCF_CCM_UOCSR_DRV_VBUS    (0x0800)
-#define MCF_CCM_UOCSR_DMPD        (0x1000)
-#define MCF_CCM_UOCSR_DPPD        (0x2000)
-#define MCF_CCM_UOCSR_PORTIND(x)  (((x)&0x0003)<<14)
-
-/*********************************************************************
- *
- * DMA Timers (DTIM)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_DTIM0_DTMR           MCF_REG16(0xFC070000)
-#define MCF_DTIM0_DTXMR          MCF_REG08(0xFC070002)
-#define MCF_DTIM0_DTER           MCF_REG08(0xFC070003)
-#define MCF_DTIM0_DTRR           MCF_REG32(0xFC070004)
-#define MCF_DTIM0_DTCR           MCF_REG32(0xFC070008)
-#define MCF_DTIM0_DTCN           MCF_REG32(0xFC07000C)
-#define MCF_DTIM1_DTMR           MCF_REG16(0xFC074000)
-#define MCF_DTIM1_DTXMR          MCF_REG08(0xFC074002)
-#define MCF_DTIM1_DTER           MCF_REG08(0xFC074003)
-#define MCF_DTIM1_DTRR           MCF_REG32(0xFC074004)
-#define MCF_DTIM1_DTCR           MCF_REG32(0xFC074008)
-#define MCF_DTIM1_DTCN           MCF_REG32(0xFC07400C)
-#define MCF_DTIM2_DTMR           MCF_REG16(0xFC078000)
-#define MCF_DTIM2_DTXMR          MCF_REG08(0xFC078002)
-#define MCF_DTIM2_DTER           MCF_REG08(0xFC078003)
-#define MCF_DTIM2_DTRR           MCF_REG32(0xFC078004)
-#define MCF_DTIM2_DTCR           MCF_REG32(0xFC078008)
-#define MCF_DTIM2_DTCN           MCF_REG32(0xFC07800C)
-#define MCF_DTIM3_DTMR           MCF_REG16(0xFC07C000)
-#define MCF_DTIM3_DTXMR          MCF_REG08(0xFC07C002)
-#define MCF_DTIM3_DTER           MCF_REG08(0xFC07C003)
-#define MCF_DTIM3_DTRR           MCF_REG32(0xFC07C004)
-#define MCF_DTIM3_DTCR           MCF_REG32(0xFC07C008)
-#define MCF_DTIM3_DTCN           MCF_REG32(0xFC07C00C)
-#define MCF_DTIM_DTMR(x)         MCF_REG16(0xFC070000+((x)*0x4000))
-#define MCF_DTIM_DTXMR(x)        MCF_REG08(0xFC070002+((x)*0x4000))
-#define MCF_DTIM_DTER(x)         MCF_REG08(0xFC070003+((x)*0x4000))
-#define MCF_DTIM_DTRR(x)         MCF_REG32(0xFC070004+((x)*0x4000))
-#define MCF_DTIM_DTCR(x)         MCF_REG32(0xFC070008+((x)*0x4000))
-#define MCF_DTIM_DTCN(x)         MCF_REG32(0xFC07000C+((x)*0x4000))
-
-/* Bit definitions and macros for MCF_DTIM_DTMR */
-#define MCF_DTIM_DTMR_RST        (0x0001)
-#define MCF_DTIM_DTMR_CLK(x)     (((x)&0x0003)<<1)
-#define MCF_DTIM_DTMR_FRR        (0x0008)
-#define MCF_DTIM_DTMR_ORRI       (0x0010)
-#define MCF_DTIM_DTMR_OM         (0x0020)
-#define MCF_DTIM_DTMR_CE(x)      (((x)&0x0003)<<6)
-#define MCF_DTIM_DTMR_PS(x)      (((x)&0x00FF)<<8)
-#define MCF_DTIM_DTMR_CE_ANY     (0x00C0)
-#define MCF_DTIM_DTMR_CE_FALL    (0x0080)
-#define MCF_DTIM_DTMR_CE_RISE    (0x0040)
-#define MCF_DTIM_DTMR_CE_NONE    (0x0000)
-#define MCF_DTIM_DTMR_CLK_DTIN   (0x0006)
-#define MCF_DTIM_DTMR_CLK_DIV16  (0x0004)
-#define MCF_DTIM_DTMR_CLK_DIV1   (0x0002)
-#define MCF_DTIM_DTMR_CLK_STOP   (0x0000)
-
-/* Bit definitions and macros for MCF_DTIM_DTXMR */
-#define MCF_DTIM_DTXMR_MODE16    (0x01)
-#define MCF_DTIM_DTXMR_DMAEN     (0x80)
-
-/* Bit definitions and macros for MCF_DTIM_DTER */
-#define MCF_DTIM_DTER_CAP        (0x01)
-#define MCF_DTIM_DTER_REF        (0x02)
-
-/* Bit definitions and macros for MCF_DTIM_DTRR */
-#define MCF_DTIM_DTRR_REF(x)     (((x)&0xFFFFFFFF)<<0)
-
-/* Bit definitions and macros for MCF_DTIM_DTCR */
-#define MCF_DTIM_DTCR_CAP(x)     (((x)&0xFFFFFFFF)<<0)
-
-/* Bit definitions and macros for MCF_DTIM_DTCN */
-#define MCF_DTIM_DTCN_CNT(x)     (((x)&0xFFFFFFFF)<<0)
-
-/*********************************************************************
- *
- * FlexBus Chip Selects (FBCS)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_FBCS0_CSAR		MCF_REG32(0xFC008000)
-#define MCF_FBCS0_CSMR		MCF_REG32(0xFC008004)
-#define MCF_FBCS0_CSCR		MCF_REG32(0xFC008008)
-#define MCF_FBCS1_CSAR		MCF_REG32(0xFC00800C)
-#define MCF_FBCS1_CSMR		MCF_REG32(0xFC008010)
-#define MCF_FBCS1_CSCR		MCF_REG32(0xFC008014)
-#define MCF_FBCS2_CSAR		MCF_REG32(0xFC008018)
-#define MCF_FBCS2_CSMR		MCF_REG32(0xFC00801C)
-#define MCF_FBCS2_CSCR		MCF_REG32(0xFC008020)
-#define MCF_FBCS3_CSAR		MCF_REG32(0xFC008024)
-#define MCF_FBCS3_CSMR		MCF_REG32(0xFC008028)
-#define MCF_FBCS3_CSCR		MCF_REG32(0xFC00802C)
-#define MCF_FBCS4_CSAR		MCF_REG32(0xFC008030)
-#define MCF_FBCS4_CSMR		MCF_REG32(0xFC008034)
-#define MCF_FBCS4_CSCR		MCF_REG32(0xFC008038)
-#define MCF_FBCS5_CSAR		MCF_REG32(0xFC00803C)
-#define MCF_FBCS5_CSMR		MCF_REG32(0xFC008040)
-#define MCF_FBCS5_CSCR		MCF_REG32(0xFC008044)
-#define MCF_FBCS_CSAR(x)	MCF_REG32(0xFC008000+((x)*0x00C))
-#define MCF_FBCS_CSMR(x)	MCF_REG32(0xFC008004+((x)*0x00C))
-#define MCF_FBCS_CSCR(x)	MCF_REG32(0xFC008008+((x)*0x00C))
-
-/* Bit definitions and macros for MCF_FBCS_CSAR */
-#define MCF_FBCS_CSAR_BA(x)	((x)&0xFFFF0000)
-
-/* Bit definitions and macros for MCF_FBCS_CSMR */
-#define MCF_FBCS_CSMR_V		(0x00000001)
-#define MCF_FBCS_CSMR_WP	(0x00000100)
-#define MCF_FBCS_CSMR_BAM(x)	(((x)&0x0000FFFF)<<16)
-#define MCF_FBCS_CSMR_BAM_4G	(0xFFFF0000)
-#define MCF_FBCS_CSMR_BAM_2G	(0x7FFF0000)
-#define MCF_FBCS_CSMR_BAM_1G	(0x3FFF0000)
-#define MCF_FBCS_CSMR_BAM_1024M	(0x3FFF0000)
-#define MCF_FBCS_CSMR_BAM_512M	(0x1FFF0000)
-#define MCF_FBCS_CSMR_BAM_256M	(0x0FFF0000)
-#define MCF_FBCS_CSMR_BAM_128M	(0x07FF0000)
-#define MCF_FBCS_CSMR_BAM_64M	(0x03FF0000)
-#define MCF_FBCS_CSMR_BAM_32M	(0x01FF0000)
-#define MCF_FBCS_CSMR_BAM_16M	(0x00FF0000)
-#define MCF_FBCS_CSMR_BAM_8M	(0x007F0000)
-#define MCF_FBCS_CSMR_BAM_4M	(0x003F0000)
-#define MCF_FBCS_CSMR_BAM_2M	(0x001F0000)
-#define MCF_FBCS_CSMR_BAM_1M	(0x000F0000)
-#define MCF_FBCS_CSMR_BAM_1024K	(0x000F0000)
-#define MCF_FBCS_CSMR_BAM_512K	(0x00070000)
-#define MCF_FBCS_CSMR_BAM_256K	(0x00030000)
-#define MCF_FBCS_CSMR_BAM_128K	(0x00010000)
-#define MCF_FBCS_CSMR_BAM_64K	(0x00000000)
-
-/* Bit definitions and macros for MCF_FBCS_CSCR */
-#define MCF_FBCS_CSCR_BSTW	(0x00000008)
-#define MCF_FBCS_CSCR_BSTR	(0x00000010)
-#define MCF_FBCS_CSCR_BEM	(0x00000020)
-#define MCF_FBCS_CSCR_PS(x)	(((x)&0x00000003)<<6)
-#define MCF_FBCS_CSCR_AA	(0x00000100)
-#define MCF_FBCS_CSCR_SBM	(0x00000200)
-#define MCF_FBCS_CSCR_WS(x)	(((x)&0x0000003F)<<10)
-#define MCF_FBCS_CSCR_WRAH(x)	(((x)&0x00000003)<<16)
-#define MCF_FBCS_CSCR_RDAH(x)	(((x)&0x00000003)<<18)
-#define MCF_FBCS_CSCR_ASET(x)	(((x)&0x00000003)<<20)
-#define MCF_FBCS_CSCR_SWSEN	(0x00800000)
-#define MCF_FBCS_CSCR_SWS(x)	(((x)&0x0000003F)<<26)
-#define MCF_FBCS_CSCR_PS_8	(0x0040)
-#define MCF_FBCS_CSCR_PS_16	(0x0080)
-#define MCF_FBCS_CSCR_PS_32	(0x0000)
-
-/*********************************************************************
- *
- * General Purpose I/O (GPIO)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_GPIO_PODR_FECH		MCF_REG08(0xFC0A4000)
-#define MCF_GPIO_PODR_FECL		MCF_REG08(0xFC0A4001)
-#define MCF_GPIO_PODR_SSI		MCF_REG08(0xFC0A4002)
-#define MCF_GPIO_PODR_BUSCTL		MCF_REG08(0xFC0A4003)
-#define MCF_GPIO_PODR_BE		MCF_REG08(0xFC0A4004)
-#define MCF_GPIO_PODR_CS		MCF_REG08(0xFC0A4005)
-#define MCF_GPIO_PODR_PWM		MCF_REG08(0xFC0A4006)
-#define MCF_GPIO_PODR_FECI2C		MCF_REG08(0xFC0A4007)
-#define MCF_GPIO_PODR_UART		MCF_REG08(0xFC0A4009)
-#define MCF_GPIO_PODR_QSPI		MCF_REG08(0xFC0A400A)
-#define MCF_GPIO_PODR_TIMER		MCF_REG08(0xFC0A400B)
-#define MCF_GPIO_PODR_LCDDATAH		MCF_REG08(0xFC0A400D)
-#define MCF_GPIO_PODR_LCDDATAM		MCF_REG08(0xFC0A400E)
-#define MCF_GPIO_PODR_LCDDATAL		MCF_REG08(0xFC0A400F)
-#define MCF_GPIO_PODR_LCDCTLH		MCF_REG08(0xFC0A4010)
-#define MCF_GPIO_PODR_LCDCTLL		MCF_REG08(0xFC0A4011)
-#define MCF_GPIO_PDDR_FECH		MCF_REG08(0xFC0A4014)
-#define MCF_GPIO_PDDR_FECL		MCF_REG08(0xFC0A4015)
-#define MCF_GPIO_PDDR_SSI		MCF_REG08(0xFC0A4016)
-#define MCF_GPIO_PDDR_BUSCTL		MCF_REG08(0xFC0A4017)
-#define MCF_GPIO_PDDR_BE		MCF_REG08(0xFC0A4018)
-#define MCF_GPIO_PDDR_CS		MCF_REG08(0xFC0A4019)
-#define MCF_GPIO_PDDR_PWM		MCF_REG08(0xFC0A401A)
-#define MCF_GPIO_PDDR_FECI2C		MCF_REG08(0xFC0A401B)
-#define MCF_GPIO_PDDR_UART		MCF_REG08(0xFC0A401C)
-#define MCF_GPIO_PDDR_QSPI		MCF_REG08(0xFC0A401E)
-#define MCF_GPIO_PDDR_TIMER		MCF_REG08(0xFC0A401F)
-#define MCF_GPIO_PDDR_LCDDATAH		MCF_REG08(0xFC0A4021)
-#define MCF_GPIO_PDDR_LCDDATAM		MCF_REG08(0xFC0A4022)
-#define MCF_GPIO_PDDR_LCDDATAL		MCF_REG08(0xFC0A4023)
-#define MCF_GPIO_PDDR_LCDCTLH		MCF_REG08(0xFC0A4024)
-#define MCF_GPIO_PDDR_LCDCTLL		MCF_REG08(0xFC0A4025)
-#define MCF_GPIO_PPDSDR_FECH		MCF_REG08(0xFC0A4028)
-#define MCF_GPIO_PPDSDR_FECL		MCF_REG08(0xFC0A4029)
-#define MCF_GPIO_PPDSDR_SSI		MCF_REG08(0xFC0A402A)
-#define MCF_GPIO_PPDSDR_BUSCTL		MCF_REG08(0xFC0A402B)
-#define MCF_GPIO_PPDSDR_BE		MCF_REG08(0xFC0A402C)
-#define MCF_GPIO_PPDSDR_CS		MCF_REG08(0xFC0A402D)
-#define MCF_GPIO_PPDSDR_PWM		MCF_REG08(0xFC0A402E)
-#define MCF_GPIO_PPDSDR_FECI2C		MCF_REG08(0xFC0A402F)
-#define MCF_GPIO_PPDSDR_UART		MCF_REG08(0xFC0A4031)
-#define MCF_GPIO_PPDSDR_QSPI		MCF_REG08(0xFC0A4032)
-#define MCF_GPIO_PPDSDR_TIMER		MCF_REG08(0xFC0A4033)
-#define MCF_GPIO_PPDSDR_LCDDATAH	MCF_REG08(0xFC0A4035)
-#define MCF_GPIO_PPDSDR_LCDDATAM	MCF_REG08(0xFC0A4036)
-#define MCF_GPIO_PPDSDR_LCDDATAL	MCF_REG08(0xFC0A4037)
-#define MCF_GPIO_PPDSDR_LCDCTLH		MCF_REG08(0xFC0A4038)
-#define MCF_GPIO_PPDSDR_LCDCTLL		MCF_REG08(0xFC0A4039)
-#define MCF_GPIO_PCLRR_FECH		MCF_REG08(0xFC0A403C)
-#define MCF_GPIO_PCLRR_FECL		MCF_REG08(0xFC0A403D)
-#define MCF_GPIO_PCLRR_SSI		MCF_REG08(0xFC0A403E)
-#define MCF_GPIO_PCLRR_BUSCTL		MCF_REG08(0xFC0A403F)
-#define MCF_GPIO_PCLRR_BE		MCF_REG08(0xFC0A4040)
-#define MCF_GPIO_PCLRR_CS		MCF_REG08(0xFC0A4041)
-#define MCF_GPIO_PCLRR_PWM		MCF_REG08(0xFC0A4042)
-#define MCF_GPIO_PCLRR_FECI2C		MCF_REG08(0xFC0A4043)
-#define MCF_GPIO_PCLRR_UART		MCF_REG08(0xFC0A4045)
-#define MCF_GPIO_PCLRR_QSPI		MCF_REG08(0xFC0A4046)
-#define MCF_GPIO_PCLRR_TIMER		MCF_REG08(0xFC0A4047)
-#define MCF_GPIO_PCLRR_LCDDATAH		MCF_REG08(0xFC0A4049)
-#define MCF_GPIO_PCLRR_LCDDATAM		MCF_REG08(0xFC0A404A)
-#define MCF_GPIO_PCLRR_LCDDATAL		MCF_REG08(0xFC0A404B)
-#define MCF_GPIO_PCLRR_LCDCTLH		MCF_REG08(0xFC0A404C)
-#define MCF_GPIO_PCLRR_LCDCTLL		MCF_REG08(0xFC0A404D)
-#define MCF_GPIO_PAR_FEC		MCF_REG08(0xFC0A4050)
-#define MCF_GPIO_PAR_PWM		MCF_REG08(0xFC0A4051)
-#define MCF_GPIO_PAR_BUSCTL		MCF_REG08(0xFC0A4052)
-#define MCF_GPIO_PAR_FECI2C		MCF_REG08(0xFC0A4053)
-#define MCF_GPIO_PAR_BE			MCF_REG08(0xFC0A4054)
-#define MCF_GPIO_PAR_CS			MCF_REG08(0xFC0A4055)
-#define MCF_GPIO_PAR_SSI		MCF_REG16(0xFC0A4056)
-#define MCF_GPIO_PAR_UART		MCF_REG16(0xFC0A4058)
-#define MCF_GPIO_PAR_QSPI		MCF_REG16(0xFC0A405A)
-#define MCF_GPIO_PAR_TIMER		MCF_REG08(0xFC0A405C)
-#define MCF_GPIO_PAR_LCDDATA		MCF_REG08(0xFC0A405D)
-#define MCF_GPIO_PAR_LCDCTL		MCF_REG16(0xFC0A405E)
-#define MCF_GPIO_PAR_IRQ		MCF_REG16(0xFC0A4060)
-#define MCF_GPIO_MSCR_FLEXBUS		MCF_REG08(0xFC0A4064)
-#define MCF_GPIO_MSCR_SDRAM		MCF_REG08(0xFC0A4065)
-#define MCF_GPIO_DSCR_I2C		MCF_REG08(0xFC0A4068)
-#define MCF_GPIO_DSCR_PWM		MCF_REG08(0xFC0A4069)
-#define MCF_GPIO_DSCR_FEC		MCF_REG08(0xFC0A406A)
-#define MCF_GPIO_DSCR_UART		MCF_REG08(0xFC0A406B)
-#define MCF_GPIO_DSCR_QSPI		MCF_REG08(0xFC0A406C)
-#define MCF_GPIO_DSCR_TIMER		MCF_REG08(0xFC0A406D)
-#define MCF_GPIO_DSCR_SSI		MCF_REG08(0xFC0A406E)
-#define MCF_GPIO_DSCR_LCD		MCF_REG08(0xFC0A406F)
-#define MCF_GPIO_DSCR_DEBUG		MCF_REG08(0xFC0A4070)
-#define MCF_GPIO_DSCR_CLKRST		MCF_REG08(0xFC0A4071)
-#define MCF_GPIO_DSCR_IRQ		MCF_REG08(0xFC0A4072)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_FECH */
-#define MCF_GPIO_PODR_FECH_PODR_FECH0              (0x01)
-#define MCF_GPIO_PODR_FECH_PODR_FECH1              (0x02)
-#define MCF_GPIO_PODR_FECH_PODR_FECH2              (0x04)
-#define MCF_GPIO_PODR_FECH_PODR_FECH3              (0x08)
-#define MCF_GPIO_PODR_FECH_PODR_FECH4              (0x10)
-#define MCF_GPIO_PODR_FECH_PODR_FECH5              (0x20)
-#define MCF_GPIO_PODR_FECH_PODR_FECH6              (0x40)
-#define MCF_GPIO_PODR_FECH_PODR_FECH7              (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_FECL */
-#define MCF_GPIO_PODR_FECL_PODR_FECL0              (0x01)
-#define MCF_GPIO_PODR_FECL_PODR_FECL1              (0x02)
-#define MCF_GPIO_PODR_FECL_PODR_FECL2              (0x04)
-#define MCF_GPIO_PODR_FECL_PODR_FECL3              (0x08)
-#define MCF_GPIO_PODR_FECL_PODR_FECL4              (0x10)
-#define MCF_GPIO_PODR_FECL_PODR_FECL5              (0x20)
-#define MCF_GPIO_PODR_FECL_PODR_FECL6              (0x40)
-#define MCF_GPIO_PODR_FECL_PODR_FECL7              (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_SSI */
-#define MCF_GPIO_PODR_SSI_PODR_SSI0                (0x01)
-#define MCF_GPIO_PODR_SSI_PODR_SSI1                (0x02)
-#define MCF_GPIO_PODR_SSI_PODR_SSI2                (0x04)
-#define MCF_GPIO_PODR_SSI_PODR_SSI3                (0x08)
-#define MCF_GPIO_PODR_SSI_PODR_SSI4                (0x10)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_BUSCTL */
-#define MCF_GPIO_PODR_BUSCTL_POSDR_BUSCTL0         (0x01)
-#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL1          (0x02)
-#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL2          (0x04)
-#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL3          (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_BE */
-#define MCF_GPIO_PODR_BE_PODR_BE0                  (0x01)
-#define MCF_GPIO_PODR_BE_PODR_BE1                  (0x02)
-#define MCF_GPIO_PODR_BE_PODR_BE2                  (0x04)
-#define MCF_GPIO_PODR_BE_PODR_BE3                  (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_CS */
-#define MCF_GPIO_PODR_CS_PODR_CS1                  (0x02)
-#define MCF_GPIO_PODR_CS_PODR_CS2                  (0x04)
-#define MCF_GPIO_PODR_CS_PODR_CS3                  (0x08)
-#define MCF_GPIO_PODR_CS_PODR_CS4                  (0x10)
-#define MCF_GPIO_PODR_CS_PODR_CS5                  (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_PWM */
-#define MCF_GPIO_PODR_PWM_PODR_PWM2                (0x04)
-#define MCF_GPIO_PODR_PWM_PODR_PWM3                (0x08)
-#define MCF_GPIO_PODR_PWM_PODR_PWM4                (0x10)
-#define MCF_GPIO_PODR_PWM_PODR_PWM5                (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_FECI2C */
-#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C0          (0x01)
-#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C1          (0x02)
-#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C2          (0x04)
-#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C3          (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_UART */
-#define MCF_GPIO_PODR_UART_PODR_UART0              (0x01)
-#define MCF_GPIO_PODR_UART_PODR_UART1              (0x02)
-#define MCF_GPIO_PODR_UART_PODR_UART2              (0x04)
-#define MCF_GPIO_PODR_UART_PODR_UART3              (0x08)
-#define MCF_GPIO_PODR_UART_PODR_UART4              (0x10)
-#define MCF_GPIO_PODR_UART_PODR_UART5              (0x20)
-#define MCF_GPIO_PODR_UART_PODR_UART6              (0x40)
-#define MCF_GPIO_PODR_UART_PODR_UART7              (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_QSPI */
-#define MCF_GPIO_PODR_QSPI_PODR_QSPI0              (0x01)
-#define MCF_GPIO_PODR_QSPI_PODR_QSPI1              (0x02)
-#define MCF_GPIO_PODR_QSPI_PODR_QSPI2              (0x04)
-#define MCF_GPIO_PODR_QSPI_PODR_QSPI3              (0x08)
-#define MCF_GPIO_PODR_QSPI_PODR_QSPI4              (0x10)
-#define MCF_GPIO_PODR_QSPI_PODR_QSPI5              (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_TIMER */
-#define MCF_GPIO_PODR_TIMER_PODR_TIMER0            (0x01)
-#define MCF_GPIO_PODR_TIMER_PODR_TIMER1            (0x02)
-#define MCF_GPIO_PODR_TIMER_PODR_TIMER2            (0x04)
-#define MCF_GPIO_PODR_TIMER_PODR_TIMER3            (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAH */
-#define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH0      (0x01)
-#define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH1      (0x02)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAM */
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM0      (0x01)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM1      (0x02)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM2      (0x04)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM3      (0x08)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM4      (0x10)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM5      (0x20)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM6      (0x40)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM7      (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAL */
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL0      (0x01)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL1      (0x02)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL2      (0x04)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL3      (0x08)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL4      (0x10)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL5      (0x20)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL6      (0x40)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL7      (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLH */
-#define MCF_GPIO_PODR_LCDCTLH_PODR_LCDCTLH0        (0x01)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLL */
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL0        (0x01)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL1        (0x02)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL2        (0x04)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL3        (0x08)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL4        (0x10)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL5        (0x20)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL6        (0x40)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL7        (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_FECH */
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH0              (0x01)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH1              (0x02)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH2              (0x04)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH3              (0x08)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH4              (0x10)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH5              (0x20)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH6              (0x40)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH7              (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_FECL */
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL0              (0x01)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL1              (0x02)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL2              (0x04)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL3              (0x08)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL4              (0x10)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL5              (0x20)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL6              (0x40)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL7              (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_SSI */
-#define MCF_GPIO_PDDR_SSI_PDDR_SSI0                (0x01)
-#define MCF_GPIO_PDDR_SSI_PDDR_SSI1                (0x02)
-#define MCF_GPIO_PDDR_SSI_PDDR_SSI2                (0x04)
-#define MCF_GPIO_PDDR_SSI_PDDR_SSI3                (0x08)
-#define MCF_GPIO_PDDR_SSI_PDDR_SSI4                (0x10)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_BUSCTL */
-#define MCF_GPIO_PDDR_BUSCTL_POSDR_BUSCTL0         (0x01)
-#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL1          (0x02)
-#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL2          (0x04)
-#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL3          (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_BE */
-#define MCF_GPIO_PDDR_BE_PDDR_BE0                  (0x01)
-#define MCF_GPIO_PDDR_BE_PDDR_BE1                  (0x02)
-#define MCF_GPIO_PDDR_BE_PDDR_BE2                  (0x04)
-#define MCF_GPIO_PDDR_BE_PDDR_BE3                  (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_CS */
-#define MCF_GPIO_PDDR_CS_PDDR_CS1                  (0x02)
-#define MCF_GPIO_PDDR_CS_PDDR_CS2                  (0x04)
-#define MCF_GPIO_PDDR_CS_PDDR_CS3                  (0x08)
-#define MCF_GPIO_PDDR_CS_PDDR_CS4                  (0x10)
-#define MCF_GPIO_PDDR_CS_PDDR_CS5                  (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_PWM */
-#define MCF_GPIO_PDDR_PWM_PDDR_PWM2                (0x04)
-#define MCF_GPIO_PDDR_PWM_PDDR_PWM3                (0x08)
-#define MCF_GPIO_PDDR_PWM_PDDR_PWM4                (0x10)
-#define MCF_GPIO_PDDR_PWM_PDDR_PWM5                (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_FECI2C */
-#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C0          (0x01)
-#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C1          (0x02)
-#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C2          (0x04)
-#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C3          (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_UART */
-#define MCF_GPIO_PDDR_UART_PDDR_UART0              (0x01)
-#define MCF_GPIO_PDDR_UART_PDDR_UART1              (0x02)
-#define MCF_GPIO_PDDR_UART_PDDR_UART2              (0x04)
-#define MCF_GPIO_PDDR_UART_PDDR_UART3              (0x08)
-#define MCF_GPIO_PDDR_UART_PDDR_UART4              (0x10)
-#define MCF_GPIO_PDDR_UART_PDDR_UART5              (0x20)
-#define MCF_GPIO_PDDR_UART_PDDR_UART6              (0x40)
-#define MCF_GPIO_PDDR_UART_PDDR_UART7              (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_QSPI */
-#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI0              (0x01)
-#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI1              (0x02)
-#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI2              (0x04)
-#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI3              (0x08)
-#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI4              (0x10)
-#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI5              (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_TIMER */
-#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER0            (0x01)
-#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER1            (0x02)
-#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER2            (0x04)
-#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER3            (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAH */
-#define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH0      (0x01)
-#define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH1      (0x02)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAM */
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM0      (0x01)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM1      (0x02)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM2      (0x04)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM3      (0x08)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM4      (0x10)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM5      (0x20)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM6      (0x40)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM7      (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAL */
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL0      (0x01)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL1      (0x02)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL2      (0x04)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL3      (0x08)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL4      (0x10)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL5      (0x20)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL6      (0x40)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL7      (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLH */
-#define MCF_GPIO_PDDR_LCDCTLH_PDDR_LCDCTLH0        (0x01)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLL */
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL0        (0x01)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL1        (0x02)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL2        (0x04)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL3        (0x08)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL4        (0x10)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL5        (0x20)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL6        (0x40)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL7        (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECH */
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH0          (0x01)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH1          (0x02)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH2          (0x04)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH3          (0x08)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH4          (0x10)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH5          (0x20)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH6          (0x40)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH7          (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECL */
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL0          (0x01)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL1          (0x02)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL2          (0x04)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL3          (0x08)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL4          (0x10)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL5          (0x20)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL6          (0x40)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL7          (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_SSI */
-#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI0            (0x01)
-#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI1            (0x02)
-#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI2            (0x04)
-#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI3            (0x08)
-#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI4            (0x10)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_BUSCTL */
-#define MCF_GPIO_PPDSDR_BUSCTL_POSDR_BUSCTL0       (0x01)
-#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL1      (0x02)
-#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL2      (0x04)
-#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL3      (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_BE */
-#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE0              (0x01)
-#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE1              (0x02)
-#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE2              (0x04)
-#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE3              (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_CS */
-#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS1              (0x02)
-#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS2              (0x04)
-#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS3              (0x08)
-#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS4              (0x10)
-#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS5              (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_PWM */
-#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM2            (0x04)
-#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM3            (0x08)
-#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM4            (0x10)
-#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM5            (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECI2C */
-#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C0      (0x01)
-#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C1      (0x02)
-#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C2      (0x04)
-#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C3      (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_UART */
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART0          (0x01)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART1          (0x02)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART2          (0x04)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART3          (0x08)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART4          (0x10)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART5          (0x20)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART6          (0x40)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART7          (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_QSPI */
-#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI0          (0x01)
-#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI1          (0x02)
-#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI2          (0x04)
-#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI3          (0x08)
-#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI4          (0x10)
-#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI5          (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_TIMER */
-#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER0        (0x01)
-#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER1        (0x02)
-#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER2        (0x04)
-#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER3        (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAH */
-#define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH0  (0x01)
-#define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH1  (0x02)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAM */
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM0  (0x01)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM1  (0x02)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM2  (0x04)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM3  (0x08)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM4  (0x10)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM5  (0x20)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM6  (0x40)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM7  (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAL */
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL0  (0x01)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL1  (0x02)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL2  (0x04)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL3  (0x08)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL4  (0x10)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL5  (0x20)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL6  (0x40)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL7  (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLH */
-#define MCF_GPIO_PPDSDR_LCDCTLH_PPDSDR_LCDCTLH0    (0x01)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLL */
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL0    (0x01)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL1    (0x02)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL2    (0x04)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL3    (0x08)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL4    (0x10)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL5    (0x20)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL6    (0x40)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL7    (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_FECH */
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH0            (0x01)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH1            (0x02)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH2            (0x04)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH3            (0x08)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH4            (0x10)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH5            (0x20)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH6            (0x40)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH7            (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_FECL */
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL0            (0x01)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL1            (0x02)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL2            (0x04)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL3            (0x08)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL4            (0x10)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL5            (0x20)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL6            (0x40)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL7            (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_SSI */
-#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI0              (0x01)
-#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI1              (0x02)
-#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI2              (0x04)
-#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI3              (0x08)
-#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI4              (0x10)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_BUSCTL */
-#define MCF_GPIO_PCLRR_BUSCTL_POSDR_BUSCTL0        (0x01)
-#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL1        (0x02)
-#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL2        (0x04)
-#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL3        (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_BE */
-#define MCF_GPIO_PCLRR_BE_PCLRR_BE0                (0x01)
-#define MCF_GPIO_PCLRR_BE_PCLRR_BE1                (0x02)
-#define MCF_GPIO_PCLRR_BE_PCLRR_BE2                (0x04)
-#define MCF_GPIO_PCLRR_BE_PCLRR_BE3                (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_CS */
-#define MCF_GPIO_PCLRR_CS_PCLRR_CS1                (0x02)
-#define MCF_GPIO_PCLRR_CS_PCLRR_CS2                (0x04)
-#define MCF_GPIO_PCLRR_CS_PCLRR_CS3                (0x08)
-#define MCF_GPIO_PCLRR_CS_PCLRR_CS4                (0x10)
-#define MCF_GPIO_PCLRR_CS_PCLRR_CS5                (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_PWM */
-#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM2              (0x04)
-#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM3              (0x08)
-#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM4              (0x10)
-#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM5              (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_FECI2C */
-#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C0        (0x01)
-#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C1        (0x02)
-#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C2        (0x04)
-#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C3        (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_UART */
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART0            (0x01)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART1            (0x02)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART2            (0x04)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART3            (0x08)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART4            (0x10)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART5            (0x20)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART6            (0x40)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART7            (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_QSPI */
-#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI0            (0x01)
-#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI1            (0x02)
-#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI2            (0x04)
-#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI3            (0x08)
-#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI4            (0x10)
-#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI5            (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_TIMER */
-#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER0          (0x01)
-#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER1          (0x02)
-#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER2          (0x04)
-#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER3          (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAH */
-#define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH0    (0x01)
-#define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH1    (0x02)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAM */
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM0    (0x01)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM1    (0x02)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM2    (0x04)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM3    (0x08)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM4    (0x10)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM5    (0x20)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM6    (0x40)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM7    (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAL */
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL0    (0x01)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL1    (0x02)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL2    (0x04)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL3    (0x08)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL4    (0x10)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL5    (0x20)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL6    (0x40)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL7    (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLH */
-#define MCF_GPIO_PCLRR_LCDCTLH_PCLRR_LCDCTLH0      (0x01)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLL */
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL0      (0x01)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL1      (0x02)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL2      (0x04)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL3      (0x08)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL4      (0x10)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL5      (0x20)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL6      (0x40)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL7      (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_FEC */
-#define MCF_GPIO_PAR_FEC_PAR_FEC_MII(x)            (((x)&0x03)<<0)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_7W(x)             (((x)&0x03)<<2)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_GPIO           (0x00)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_URTS1          (0x04)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC            (0x0C)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_GPIO          (0x00)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_UART          (0x01)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC           (0x03)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_PWM */
-#define MCF_GPIO_PAR_PWM_PAR_PWM1(x)               (((x)&0x03)<<0)
-#define MCF_GPIO_PAR_PWM_PAR_PWM3(x)               (((x)&0x03)<<2)
-#define MCF_GPIO_PAR_PWM_PAR_PWM5                  (0x10)
-#define MCF_GPIO_PAR_PWM_PAR_PWM7                  (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_BUSCTL */
-#define MCF_GPIO_PAR_BUSCTL_PAR_TS(x)              (((x)&0x03)<<3)
-#define MCF_GPIO_PAR_BUSCTL_PAR_RWB                (0x20)
-#define MCF_GPIO_PAR_BUSCTL_PAR_TA                 (0x40)
-#define MCF_GPIO_PAR_BUSCTL_PAR_OE                 (0x80)
-#define MCF_GPIO_PAR_BUSCTL_PAR_OE_GPIO            (0x00)
-#define MCF_GPIO_PAR_BUSCTL_PAR_OE_OE              (0x80)
-#define MCF_GPIO_PAR_BUSCTL_PAR_TA_GPIO            (0x00)
-#define MCF_GPIO_PAR_BUSCTL_PAR_TA_TA              (0x40)
-#define MCF_GPIO_PAR_BUSCTL_PAR_RWB_GPIO           (0x00)
-#define MCF_GPIO_PAR_BUSCTL_PAR_RWB_RWB            (0x20)
-#define MCF_GPIO_PAR_BUSCTL_PAR_TS_GPIO            (0x00)
-#define MCF_GPIO_PAR_BUSCTL_PAR_TS_DACK0           (0x10)
-#define MCF_GPIO_PAR_BUSCTL_PAR_TS_TS              (0x18)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_FECI2C */
-#define MCF_GPIO_PAR_FECI2C_PAR_SDA(x)             (((x)&0x03)<<0)
-#define MCF_GPIO_PAR_FECI2C_PAR_SCL(x)             (((x)&0x03)<<2)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDIO(x)            (((x)&0x03)<<4)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDC(x)             (((x)&0x03)<<6)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDC_GPIO           (0x00)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDC_UTXD2          (0x40)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDC_SCL            (0x80)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC           (0xC0)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_GPIO          (0x00)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_URXD2         (0x10)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_SDA           (0x20)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO         (0x30)
-#define MCF_GPIO_PAR_FECI2C_PAR_SCL_GPIO           (0x00)
-#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2          (0x04)
-#define MCF_GPIO_PAR_FECI2C_PAR_SCL_SCL            (0x0C)
-#define MCF_GPIO_PAR_FECI2C_PAR_SDA_GPIO           (0x00)
-#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2          (0x02)
-#define MCF_GPIO_PAR_FECI2C_PAR_SDA_SDA            (0x03)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_BE */
-#define MCF_GPIO_PAR_BE_PAR_BE0                    (0x01)
-#define MCF_GPIO_PAR_BE_PAR_BE1                    (0x02)
-#define MCF_GPIO_PAR_BE_PAR_BE2                    (0x04)
-#define MCF_GPIO_PAR_BE_PAR_BE3                    (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_CS */
-#define MCF_GPIO_PAR_CS_PAR_CS1                    (0x02)
-#define MCF_GPIO_PAR_CS_PAR_CS2                    (0x04)
-#define MCF_GPIO_PAR_CS_PAR_CS3                    (0x08)
-#define MCF_GPIO_PAR_CS_PAR_CS4                    (0x10)
-#define MCF_GPIO_PAR_CS_PAR_CS5                    (0x20)
-#define MCF_GPIO_PAR_CS_PAR_CS_CS1_GPIO            (0x00)
-#define MCF_GPIO_PAR_CS_PAR_CS_CS1_SDCS1           (0x01)
-#define MCF_GPIO_PAR_CS_PAR_CS_CS1_CS1             (0x03)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_SSI */
-#define MCF_GPIO_PAR_SSI_PAR_MCLK                  (0x0080)
-#define MCF_GPIO_PAR_SSI_PAR_TXD(x)                (((x)&0x0003)<<8)
-#define MCF_GPIO_PAR_SSI_PAR_RXD(x)                (((x)&0x0003)<<10)
-#define MCF_GPIO_PAR_SSI_PAR_FS(x)                 (((x)&0x0003)<<12)
-#define MCF_GPIO_PAR_SSI_PAR_BCLK(x)               (((x)&0x0003)<<14)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_UART */
-#define MCF_GPIO_PAR_UART_PAR_UTXD0                (0x0001)
-#define MCF_GPIO_PAR_UART_PAR_URXD0                (0x0002)
-#define MCF_GPIO_PAR_UART_PAR_URTS0                (0x0004)
-#define MCF_GPIO_PAR_UART_PAR_UCTS0                (0x0008)
-#define MCF_GPIO_PAR_UART_PAR_UTXD1(x)             (((x)&0x0003)<<4)
-#define MCF_GPIO_PAR_UART_PAR_URXD1(x)             (((x)&0x0003)<<6)
-#define MCF_GPIO_PAR_UART_PAR_URTS1(x)             (((x)&0x0003)<<8)
-#define MCF_GPIO_PAR_UART_PAR_UCTS1(x)             (((x)&0x0003)<<10)
-#define MCF_GPIO_PAR_UART_PAR_UCTS1_GPIO           (0x0000)
-#define MCF_GPIO_PAR_UART_PAR_UCTS1_SSI_BCLK       (0x0800)
-#define MCF_GPIO_PAR_UART_PAR_UCTS1_ULPI_D7        (0x0400)
-#define MCF_GPIO_PAR_UART_PAR_UCTS1_UCTS1          (0x0C00)
-#define MCF_GPIO_PAR_UART_PAR_URTS1_GPIO           (0x0000)
-#define MCF_GPIO_PAR_UART_PAR_URTS1_SSI_FS         (0x0200)
-#define MCF_GPIO_PAR_UART_PAR_URTS1_ULPI_D6        (0x0100)
-#define MCF_GPIO_PAR_UART_PAR_URTS1_URTS1          (0x0300)
-#define MCF_GPIO_PAR_UART_PAR_URXD1_GPIO           (0x0000)
-#define MCF_GPIO_PAR_UART_PAR_URXD1_SSI_RXD        (0x0080)
-#define MCF_GPIO_PAR_UART_PAR_URXD1_ULPI_D5        (0x0040)
-#define MCF_GPIO_PAR_UART_PAR_URXD1_URXD1          (0x00C0)
-#define MCF_GPIO_PAR_UART_PAR_UTXD1_GPIO           (0x0000)
-#define MCF_GPIO_PAR_UART_PAR_UTXD1_SSI_TXD        (0x0020)
-#define MCF_GPIO_PAR_UART_PAR_UTXD1_ULPI_D4        (0x0010)
-#define MCF_GPIO_PAR_UART_PAR_UTXD1_UTXD1          (0x0030)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_QSPI */
-#define MCF_GPIO_PAR_QSPI_PAR_SCK(x)               (((x)&0x0003)<<4)
-#define MCF_GPIO_PAR_QSPI_PAR_DOUT(x)              (((x)&0x0003)<<6)
-#define MCF_GPIO_PAR_QSPI_PAR_DIN(x)               (((x)&0x0003)<<8)
-#define MCF_GPIO_PAR_QSPI_PAR_PCS0(x)              (((x)&0x0003)<<10)
-#define MCF_GPIO_PAR_QSPI_PAR_PCS1(x)              (((x)&0x0003)<<12)
-#define MCF_GPIO_PAR_QSPI_PAR_PCS2(x)              (((x)&0x0003)<<14)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_TIMER */
-#define MCF_GPIO_PAR_TIMER_PAR_TIN0(x)             (((x)&0x03)<<0)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN1(x)             (((x)&0x03)<<2)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN2(x)             (((x)&0x03)<<4)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN3(x)             (((x)&0x03)<<6)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN3_GPIO           (0x00)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TOUT3          (0x80)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN3_URXD2          (0x40)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TIN3           (0xC0)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN2_GPIO           (0x00)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TOUT2          (0x20)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN2_UTXD2          (0x10)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TIN2           (0x30)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN1_GPIO           (0x00)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN1_TOUT1          (0x08)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN1_DACK1          (0x04)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN1_TIN1           (0x0C)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN0_GPIO           (0x00)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN0_TOUT0          (0x02)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN0_DREQ0          (0x01)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN0_TIN0           (0x03)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_LCDDATA */
-#define MCF_GPIO_PAR_LCDDATA_PAR_LD7_0(x)          (((x)&0x03)<<0)
-#define MCF_GPIO_PAR_LCDDATA_PAR_LD15_8(x)         (((x)&0x03)<<2)
-#define MCF_GPIO_PAR_LCDDATA_PAR_LD16(x)           (((x)&0x03)<<4)
-#define MCF_GPIO_PAR_LCDDATA_PAR_LD17(x)           (((x)&0x03)<<6)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_LCDCTL */
-#define MCF_GPIO_PAR_LCDCTL_PAR_CLS                (0x0001)
-#define MCF_GPIO_PAR_LCDCTL_PAR_PS                 (0x0002)
-#define MCF_GPIO_PAR_LCDCTL_PAR_REV                (0x0004)
-#define MCF_GPIO_PAR_LCDCTL_PAR_SPL_SPR            (0x0008)
-#define MCF_GPIO_PAR_LCDCTL_PAR_CONTRAST           (0x0010)
-#define MCF_GPIO_PAR_LCDCTL_PAR_LSCLK              (0x0020)
-#define MCF_GPIO_PAR_LCDCTL_PAR_LP_HSYNC           (0x0040)
-#define MCF_GPIO_PAR_LCDCTL_PAR_FLM_VSYNC          (0x0080)
-#define MCF_GPIO_PAR_LCDCTL_PAR_ACD_OE             (0x0100)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_IRQ */
-#define MCF_GPIO_PAR_IRQ_PAR_IRQ1(x)               (((x)&0x0003)<<4)
-#define MCF_GPIO_PAR_IRQ_PAR_IRQ2(x)               (((x)&0x0003)<<6)
-#define MCF_GPIO_PAR_IRQ_PAR_IRQ4(x)               (((x)&0x0003)<<8)
-#define MCF_GPIO_PAR_IRQ_PAR_IRQ5(x)               (((x)&0x0003)<<10)
-#define MCF_GPIO_PAR_IRQ_PAR_IRQ6(x)               (((x)&0x0003)<<12)
-
-/* Bit definitions and macros for MCF_GPIO_MSCR_FLEXBUS */
-#define MCF_GPIO_MSCR_FLEXBUS_MSCR_ADDRCTL(x)      (((x)&0x03)<<0)
-#define MCF_GPIO_MSCR_FLEXBUS_MSCR_DLOWER(x)       (((x)&0x03)<<2)
-#define MCF_GPIO_MSCR_FLEXBUS_MSCR_DUPPER(x)       (((x)&0x03)<<4)
-
-/* Bit definitions and macros for MCF_GPIO_MSCR_SDRAM */
-#define MCF_GPIO_MSCR_SDRAM_MSCR_SDRAM(x)          (((x)&0x03)<<0)
-#define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLK(x)          (((x)&0x03)<<2)
-#define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLKB(x)         (((x)&0x03)<<4)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_I2C */
-#define MCF_GPIO_DSCR_I2C_I2C_DSE(x)               (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_PWM */
-#define MCF_GPIO_DSCR_PWM_PWM_DSE(x)               (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_FEC */
-#define MCF_GPIO_DSCR_FEC_FEC_DSE(x)               (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_UART */
-#define MCF_GPIO_DSCR_UART_UART0_DSE(x)            (((x)&0x03)<<0)
-#define MCF_GPIO_DSCR_UART_UART1_DSE(x)            (((x)&0x03)<<2)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_QSPI */
-#define MCF_GPIO_DSCR_QSPI_QSPI_DSE(x)             (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_TIMER */
-#define MCF_GPIO_DSCR_TIMER_TIMER_DSE(x)           (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_SSI */
-#define MCF_GPIO_DSCR_SSI_SSI_DSE(x)               (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_LCD */
-#define MCF_GPIO_DSCR_LCD_LCD_DSE(x)               (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_DEBUG */
-#define MCF_GPIO_DSCR_DEBUG_DEBUG_DSE(x)           (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_CLKRST */
-#define MCF_GPIO_DSCR_CLKRST_CLKRST_DSE(x)         (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_IRQ */
-#define MCF_GPIO_DSCR_IRQ_IRQ_DSE(x)               (((x)&0x03)<<0)
-
-/*********************************************************************
- *
- * Interrupt Controller (INTC)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_INTC0_IPRH             MCF_REG32(0xFC048000)
-#define MCF_INTC0_IPRL             MCF_REG32(0xFC048004)
-#define MCF_INTC0_IMRH             MCF_REG32(0xFC048008)
-#define MCF_INTC0_IMRL             MCF_REG32(0xFC04800C)
-#define MCF_INTC0_INTFRCH          MCF_REG32(0xFC048010)
-#define MCF_INTC0_INTFRCL          MCF_REG32(0xFC048014)
-#define MCF_INTC0_ICONFIG          MCF_REG16(0xFC04801A)
-#define MCF_INTC0_SIMR             MCF_REG08(0xFC04801C)
-#define MCF_INTC0_CIMR             MCF_REG08(0xFC04801D)
-#define MCF_INTC0_CLMASK           MCF_REG08(0xFC04801E)
-#define MCF_INTC0_SLMASK           MCF_REG08(0xFC04801F)
-#define MCF_INTC0_ICR0             MCF_REG08(0xFC048040)
-#define MCF_INTC0_ICR1             MCF_REG08(0xFC048041)
-#define MCF_INTC0_ICR2             MCF_REG08(0xFC048042)
-#define MCF_INTC0_ICR3             MCF_REG08(0xFC048043)
-#define MCF_INTC0_ICR4             MCF_REG08(0xFC048044)
-#define MCF_INTC0_ICR5             MCF_REG08(0xFC048045)
-#define MCF_INTC0_ICR6             MCF_REG08(0xFC048046)
-#define MCF_INTC0_ICR7             MCF_REG08(0xFC048047)
-#define MCF_INTC0_ICR8             MCF_REG08(0xFC048048)
-#define MCF_INTC0_ICR9             MCF_REG08(0xFC048049)
-#define MCF_INTC0_ICR10            MCF_REG08(0xFC04804A)
-#define MCF_INTC0_ICR11            MCF_REG08(0xFC04804B)
-#define MCF_INTC0_ICR12            MCF_REG08(0xFC04804C)
-#define MCF_INTC0_ICR13            MCF_REG08(0xFC04804D)
-#define MCF_INTC0_ICR14            MCF_REG08(0xFC04804E)
-#define MCF_INTC0_ICR15            MCF_REG08(0xFC04804F)
-#define MCF_INTC0_ICR16            MCF_REG08(0xFC048050)
-#define MCF_INTC0_ICR17            MCF_REG08(0xFC048051)
-#define MCF_INTC0_ICR18            MCF_REG08(0xFC048052)
-#define MCF_INTC0_ICR19            MCF_REG08(0xFC048053)
-#define MCF_INTC0_ICR20            MCF_REG08(0xFC048054)
-#define MCF_INTC0_ICR21            MCF_REG08(0xFC048055)
-#define MCF_INTC0_ICR22            MCF_REG08(0xFC048056)
-#define MCF_INTC0_ICR23            MCF_REG08(0xFC048057)
-#define MCF_INTC0_ICR24            MCF_REG08(0xFC048058)
-#define MCF_INTC0_ICR25            MCF_REG08(0xFC048059)
-#define MCF_INTC0_ICR26            MCF_REG08(0xFC04805A)
-#define MCF_INTC0_ICR27            MCF_REG08(0xFC04805B)
-#define MCF_INTC0_ICR28            MCF_REG08(0xFC04805C)
-#define MCF_INTC0_ICR29            MCF_REG08(0xFC04805D)
-#define MCF_INTC0_ICR30            MCF_REG08(0xFC04805E)
-#define MCF_INTC0_ICR31            MCF_REG08(0xFC04805F)
-#define MCF_INTC0_ICR32            MCF_REG08(0xFC048060)
-#define MCF_INTC0_ICR33            MCF_REG08(0xFC048061)
-#define MCF_INTC0_ICR34            MCF_REG08(0xFC048062)
-#define MCF_INTC0_ICR35            MCF_REG08(0xFC048063)
-#define MCF_INTC0_ICR36            MCF_REG08(0xFC048064)
-#define MCF_INTC0_ICR37            MCF_REG08(0xFC048065)
-#define MCF_INTC0_ICR38            MCF_REG08(0xFC048066)
-#define MCF_INTC0_ICR39            MCF_REG08(0xFC048067)
-#define MCF_INTC0_ICR40            MCF_REG08(0xFC048068)
-#define MCF_INTC0_ICR41            MCF_REG08(0xFC048069)
-#define MCF_INTC0_ICR42            MCF_REG08(0xFC04806A)
-#define MCF_INTC0_ICR43            MCF_REG08(0xFC04806B)
-#define MCF_INTC0_ICR44            MCF_REG08(0xFC04806C)
-#define MCF_INTC0_ICR45            MCF_REG08(0xFC04806D)
-#define MCF_INTC0_ICR46            MCF_REG08(0xFC04806E)
-#define MCF_INTC0_ICR47            MCF_REG08(0xFC04806F)
-#define MCF_INTC0_ICR48            MCF_REG08(0xFC048070)
-#define MCF_INTC0_ICR49            MCF_REG08(0xFC048071)
-#define MCF_INTC0_ICR50            MCF_REG08(0xFC048072)
-#define MCF_INTC0_ICR51            MCF_REG08(0xFC048073)
-#define MCF_INTC0_ICR52            MCF_REG08(0xFC048074)
-#define MCF_INTC0_ICR53            MCF_REG08(0xFC048075)
-#define MCF_INTC0_ICR54            MCF_REG08(0xFC048076)
-#define MCF_INTC0_ICR55            MCF_REG08(0xFC048077)
-#define MCF_INTC0_ICR56            MCF_REG08(0xFC048078)
-#define MCF_INTC0_ICR57            MCF_REG08(0xFC048079)
-#define MCF_INTC0_ICR58            MCF_REG08(0xFC04807A)
-#define MCF_INTC0_ICR59            MCF_REG08(0xFC04807B)
-#define MCF_INTC0_ICR60            MCF_REG08(0xFC04807C)
-#define MCF_INTC0_ICR61            MCF_REG08(0xFC04807D)
-#define MCF_INTC0_ICR62            MCF_REG08(0xFC04807E)
-#define MCF_INTC0_ICR63            MCF_REG08(0xFC04807F)
-#define MCF_INTC0_ICR(x)           MCF_REG08(0xFC048040+((x)*0x001))
-#define MCF_INTC0_SWIACK           MCF_REG08(0xFC0480E0)
-#define MCF_INTC0_L1IACK           MCF_REG08(0xFC0480E4)
-#define MCF_INTC0_L2IACK           MCF_REG08(0xFC0480E8)
-#define MCF_INTC0_L3IACK           MCF_REG08(0xFC0480EC)
-#define MCF_INTC0_L4IACK           MCF_REG08(0xFC0480F0)
-#define MCF_INTC0_L5IACK           MCF_REG08(0xFC0480F4)
-#define MCF_INTC0_L6IACK           MCF_REG08(0xFC0480F8)
-#define MCF_INTC0_L7IACK           MCF_REG08(0xFC0480FC)
-#define MCF_INTC0_LIACK(x)         MCF_REG08(0xFC0480E4+((x)*0x004))
-#define MCF_INTC1_IPRH             MCF_REG32(0xFC04C000)
-#define MCF_INTC1_IPRL             MCF_REG32(0xFC04C004)
-#define MCF_INTC1_IMRH             MCF_REG32(0xFC04C008)
-#define MCF_INTC1_IMRL             MCF_REG32(0xFC04C00C)
-#define MCF_INTC1_INTFRCH          MCF_REG32(0xFC04C010)
-#define MCF_INTC1_INTFRCL          MCF_REG32(0xFC04C014)
-#define MCF_INTC1_ICONFIG          MCF_REG16(0xFC04C01A)
-#define MCF_INTC1_SIMR             MCF_REG08(0xFC04C01C)
-#define MCF_INTC1_CIMR             MCF_REG08(0xFC04C01D)
-#define MCF_INTC1_CLMASK           MCF_REG08(0xFC04C01E)
-#define MCF_INTC1_SLMASK           MCF_REG08(0xFC04C01F)
-#define MCF_INTC1_ICR0             MCF_REG08(0xFC04C040)
-#define MCF_INTC1_ICR1             MCF_REG08(0xFC04C041)
-#define MCF_INTC1_ICR2             MCF_REG08(0xFC04C042)
-#define MCF_INTC1_ICR3             MCF_REG08(0xFC04C043)
-#define MCF_INTC1_ICR4             MCF_REG08(0xFC04C044)
-#define MCF_INTC1_ICR5             MCF_REG08(0xFC04C045)
-#define MCF_INTC1_ICR6             MCF_REG08(0xFC04C046)
-#define MCF_INTC1_ICR7             MCF_REG08(0xFC04C047)
-#define MCF_INTC1_ICR8             MCF_REG08(0xFC04C048)
-#define MCF_INTC1_ICR9             MCF_REG08(0xFC04C049)
-#define MCF_INTC1_ICR10            MCF_REG08(0xFC04C04A)
-#define MCF_INTC1_ICR11            MCF_REG08(0xFC04C04B)
-#define MCF_INTC1_ICR12            MCF_REG08(0xFC04C04C)
-#define MCF_INTC1_ICR13            MCF_REG08(0xFC04C04D)
-#define MCF_INTC1_ICR14            MCF_REG08(0xFC04C04E)
-#define MCF_INTC1_ICR15            MCF_REG08(0xFC04C04F)
-#define MCF_INTC1_ICR16            MCF_REG08(0xFC04C050)
-#define MCF_INTC1_ICR17            MCF_REG08(0xFC04C051)
-#define MCF_INTC1_ICR18            MCF_REG08(0xFC04C052)
-#define MCF_INTC1_ICR19            MCF_REG08(0xFC04C053)
-#define MCF_INTC1_ICR20            MCF_REG08(0xFC04C054)
-#define MCF_INTC1_ICR21            MCF_REG08(0xFC04C055)
-#define MCF_INTC1_ICR22            MCF_REG08(0xFC04C056)
-#define MCF_INTC1_ICR23            MCF_REG08(0xFC04C057)
-#define MCF_INTC1_ICR24            MCF_REG08(0xFC04C058)
-#define MCF_INTC1_ICR25            MCF_REG08(0xFC04C059)
-#define MCF_INTC1_ICR26            MCF_REG08(0xFC04C05A)
-#define MCF_INTC1_ICR27            MCF_REG08(0xFC04C05B)
-#define MCF_INTC1_ICR28            MCF_REG08(0xFC04C05C)
-#define MCF_INTC1_ICR29            MCF_REG08(0xFC04C05D)
-#define MCF_INTC1_ICR30            MCF_REG08(0xFC04C05E)
-#define MCF_INTC1_ICR31            MCF_REG08(0xFC04C05F)
-#define MCF_INTC1_ICR32            MCF_REG08(0xFC04C060)
-#define MCF_INTC1_ICR33            MCF_REG08(0xFC04C061)
-#define MCF_INTC1_ICR34            MCF_REG08(0xFC04C062)
-#define MCF_INTC1_ICR35            MCF_REG08(0xFC04C063)
-#define MCF_INTC1_ICR36            MCF_REG08(0xFC04C064)
-#define MCF_INTC1_ICR37            MCF_REG08(0xFC04C065)
-#define MCF_INTC1_ICR38            MCF_REG08(0xFC04C066)
-#define MCF_INTC1_ICR39            MCF_REG08(0xFC04C067)
-#define MCF_INTC1_ICR40            MCF_REG08(0xFC04C068)
-#define MCF_INTC1_ICR41            MCF_REG08(0xFC04C069)
-#define MCF_INTC1_ICR42            MCF_REG08(0xFC04C06A)
-#define MCF_INTC1_ICR43            MCF_REG08(0xFC04C06B)
-#define MCF_INTC1_ICR44            MCF_REG08(0xFC04C06C)
-#define MCF_INTC1_ICR45            MCF_REG08(0xFC04C06D)
-#define MCF_INTC1_ICR46            MCF_REG08(0xFC04C06E)
-#define MCF_INTC1_ICR47            MCF_REG08(0xFC04C06F)
-#define MCF_INTC1_ICR48            MCF_REG08(0xFC04C070)
-#define MCF_INTC1_ICR49            MCF_REG08(0xFC04C071)
-#define MCF_INTC1_ICR50            MCF_REG08(0xFC04C072)
-#define MCF_INTC1_ICR51            MCF_REG08(0xFC04C073)
-#define MCF_INTC1_ICR52            MCF_REG08(0xFC04C074)
-#define MCF_INTC1_ICR53            MCF_REG08(0xFC04C075)
-#define MCF_INTC1_ICR54            MCF_REG08(0xFC04C076)
-#define MCF_INTC1_ICR55            MCF_REG08(0xFC04C077)
-#define MCF_INTC1_ICR56            MCF_REG08(0xFC04C078)
-#define MCF_INTC1_ICR57            MCF_REG08(0xFC04C079)
-#define MCF_INTC1_ICR58            MCF_REG08(0xFC04C07A)
-#define MCF_INTC1_ICR59            MCF_REG08(0xFC04C07B)
-#define MCF_INTC1_ICR60            MCF_REG08(0xFC04C07C)
-#define MCF_INTC1_ICR61            MCF_REG08(0xFC04C07D)
-#define MCF_INTC1_ICR62            MCF_REG08(0xFC04C07E)
-#define MCF_INTC1_ICR63            MCF_REG08(0xFC04C07F)
-#define MCF_INTC1_ICR(x)           MCF_REG08(0xFC04C040+((x)*0x001))
-#define MCF_INTC1_SWIACK           MCF_REG08(0xFC04C0E0)
-#define MCF_INTC1_L1IACK           MCF_REG08(0xFC04C0E4)
-#define MCF_INTC1_L2IACK           MCF_REG08(0xFC04C0E8)
-#define MCF_INTC1_L3IACK           MCF_REG08(0xFC04C0EC)
-#define MCF_INTC1_L4IACK           MCF_REG08(0xFC04C0F0)
-#define MCF_INTC1_L5IACK           MCF_REG08(0xFC04C0F4)
-#define MCF_INTC1_L6IACK           MCF_REG08(0xFC04C0F8)
-#define MCF_INTC1_L7IACK           MCF_REG08(0xFC04C0FC)
-#define MCF_INTC1_LIACK(x)         MCF_REG08(0xFC04C0E4+((x)*0x004))
-#define MCF_INTC_IPRH(x)           MCF_REG32(0xFC048000+((x)*0x4000))
-#define MCF_INTC_IPRL(x)           MCF_REG32(0xFC048004+((x)*0x4000))
-#define MCF_INTC_IMRH(x)           MCF_REG32(0xFC048008+((x)*0x4000))
-#define MCF_INTC_IMRL(x)           MCF_REG32(0xFC04800C+((x)*0x4000))
-#define MCF_INTC_INTFRCH(x)        MCF_REG32(0xFC048010+((x)*0x4000))
-#define MCF_INTC_INTFRCL(x)        MCF_REG32(0xFC048014+((x)*0x4000))
-#define MCF_INTC_ICONFIG(x)        MCF_REG16(0xFC04801A+((x)*0x4000))
-#define MCF_INTC_SIMR(x)           MCF_REG08(0xFC04801C+((x)*0x4000))
-#define MCF_INTC_CIMR(x)           MCF_REG08(0xFC04801D+((x)*0x4000))
-#define MCF_INTC_CLMASK(x)         MCF_REG08(0xFC04801E+((x)*0x4000))
-#define MCF_INTC_SLMASK(x)         MCF_REG08(0xFC04801F+((x)*0x4000))
-#define MCF_INTC_ICR0(x)           MCF_REG08(0xFC048040+((x)*0x4000))
-#define MCF_INTC_ICR1(x)           MCF_REG08(0xFC048041+((x)*0x4000))
-#define MCF_INTC_ICR2(x)           MCF_REG08(0xFC048042+((x)*0x4000))
-#define MCF_INTC_ICR3(x)           MCF_REG08(0xFC048043+((x)*0x4000))
-#define MCF_INTC_ICR4(x)           MCF_REG08(0xFC048044+((x)*0x4000))
-#define MCF_INTC_ICR5(x)           MCF_REG08(0xFC048045+((x)*0x4000))
-#define MCF_INTC_ICR6(x)           MCF_REG08(0xFC048046+((x)*0x4000))
-#define MCF_INTC_ICR7(x)           MCF_REG08(0xFC048047+((x)*0x4000))
-#define MCF_INTC_ICR8(x)           MCF_REG08(0xFC048048+((x)*0x4000))
-#define MCF_INTC_ICR9(x)           MCF_REG08(0xFC048049+((x)*0x4000))
-#define MCF_INTC_ICR10(x)          MCF_REG08(0xFC04804A+((x)*0x4000))
-#define MCF_INTC_ICR11(x)          MCF_REG08(0xFC04804B+((x)*0x4000))
-#define MCF_INTC_ICR12(x)          MCF_REG08(0xFC04804C+((x)*0x4000))
-#define MCF_INTC_ICR13(x)          MCF_REG08(0xFC04804D+((x)*0x4000))
-#define MCF_INTC_ICR14(x)          MCF_REG08(0xFC04804E+((x)*0x4000))
-#define MCF_INTC_ICR15(x)          MCF_REG08(0xFC04804F+((x)*0x4000))
-#define MCF_INTC_ICR16(x)          MCF_REG08(0xFC048050+((x)*0x4000))
-#define MCF_INTC_ICR17(x)          MCF_REG08(0xFC048051+((x)*0x4000))
-#define MCF_INTC_ICR18(x)          MCF_REG08(0xFC048052+((x)*0x4000))
-#define MCF_INTC_ICR19(x)          MCF_REG08(0xFC048053+((x)*0x4000))
-#define MCF_INTC_ICR20(x)          MCF_REG08(0xFC048054+((x)*0x4000))
-#define MCF_INTC_ICR21(x)          MCF_REG08(0xFC048055+((x)*0x4000))
-#define MCF_INTC_ICR22(x)          MCF_REG08(0xFC048056+((x)*0x4000))
-#define MCF_INTC_ICR23(x)          MCF_REG08(0xFC048057+((x)*0x4000))
-#define MCF_INTC_ICR24(x)          MCF_REG08(0xFC048058+((x)*0x4000))
-#define MCF_INTC_ICR25(x)          MCF_REG08(0xFC048059+((x)*0x4000))
-#define MCF_INTC_ICR26(x)          MCF_REG08(0xFC04805A+((x)*0x4000))
-#define MCF_INTC_ICR27(x)          MCF_REG08(0xFC04805B+((x)*0x4000))
-#define MCF_INTC_ICR28(x)          MCF_REG08(0xFC04805C+((x)*0x4000))
-#define MCF_INTC_ICR29(x)          MCF_REG08(0xFC04805D+((x)*0x4000))
-#define MCF_INTC_ICR30(x)          MCF_REG08(0xFC04805E+((x)*0x4000))
-#define MCF_INTC_ICR31(x)          MCF_REG08(0xFC04805F+((x)*0x4000))
-#define MCF_INTC_ICR32(x)          MCF_REG08(0xFC048060+((x)*0x4000))
-#define MCF_INTC_ICR33(x)          MCF_REG08(0xFC048061+((x)*0x4000))
-#define MCF_INTC_ICR34(x)          MCF_REG08(0xFC048062+((x)*0x4000))
-#define MCF_INTC_ICR35(x)          MCF_REG08(0xFC048063+((x)*0x4000))
-#define MCF_INTC_ICR36(x)          MCF_REG08(0xFC048064+((x)*0x4000))
-#define MCF_INTC_ICR37(x)          MCF_REG08(0xFC048065+((x)*0x4000))
-#define MCF_INTC_ICR38(x)          MCF_REG08(0xFC048066+((x)*0x4000))
-#define MCF_INTC_ICR39(x)          MCF_REG08(0xFC048067+((x)*0x4000))
-#define MCF_INTC_ICR40(x)          MCF_REG08(0xFC048068+((x)*0x4000))
-#define MCF_INTC_ICR41(x)          MCF_REG08(0xFC048069+((x)*0x4000))
-#define MCF_INTC_ICR42(x)          MCF_REG08(0xFC04806A+((x)*0x4000))
-#define MCF_INTC_ICR43(x)          MCF_REG08(0xFC04806B+((x)*0x4000))
-#define MCF_INTC_ICR44(x)          MCF_REG08(0xFC04806C+((x)*0x4000))
-#define MCF_INTC_ICR45(x)          MCF_REG08(0xFC04806D+((x)*0x4000))
-#define MCF_INTC_ICR46(x)          MCF_REG08(0xFC04806E+((x)*0x4000))
-#define MCF_INTC_ICR47(x)          MCF_REG08(0xFC04806F+((x)*0x4000))
-#define MCF_INTC_ICR48(x)          MCF_REG08(0xFC048070+((x)*0x4000))
-#define MCF_INTC_ICR49(x)          MCF_REG08(0xFC048071+((x)*0x4000))
-#define MCF_INTC_ICR50(x)          MCF_REG08(0xFC048072+((x)*0x4000))
-#define MCF_INTC_ICR51(x)          MCF_REG08(0xFC048073+((x)*0x4000))
-#define MCF_INTC_ICR52(x)          MCF_REG08(0xFC048074+((x)*0x4000))
-#define MCF_INTC_ICR53(x)          MCF_REG08(0xFC048075+((x)*0x4000))
-#define MCF_INTC_ICR54(x)          MCF_REG08(0xFC048076+((x)*0x4000))
-#define MCF_INTC_ICR55(x)          MCF_REG08(0xFC048077+((x)*0x4000))
-#define MCF_INTC_ICR56(x)          MCF_REG08(0xFC048078+((x)*0x4000))
-#define MCF_INTC_ICR57(x)          MCF_REG08(0xFC048079+((x)*0x4000))
-#define MCF_INTC_ICR58(x)          MCF_REG08(0xFC04807A+((x)*0x4000))
-#define MCF_INTC_ICR59(x)          MCF_REG08(0xFC04807B+((x)*0x4000))
-#define MCF_INTC_ICR60(x)          MCF_REG08(0xFC04807C+((x)*0x4000))
-#define MCF_INTC_ICR61(x)          MCF_REG08(0xFC04807D+((x)*0x4000))
-#define MCF_INTC_ICR62(x)          MCF_REG08(0xFC04807E+((x)*0x4000))
-#define MCF_INTC_ICR63(x)          MCF_REG08(0xFC04807F+((x)*0x4000))
-#define MCF_INTC_SWIACK(x)         MCF_REG08(0xFC0480E0+((x)*0x4000))
-#define MCF_INTC_L1IACK(x)         MCF_REG08(0xFC0480E4+((x)*0x4000))
-#define MCF_INTC_L2IACK(x)         MCF_REG08(0xFC0480E8+((x)*0x4000))
-#define MCF_INTC_L3IACK(x)         MCF_REG08(0xFC0480EC+((x)*0x4000))
-#define MCF_INTC_L4IACK(x)         MCF_REG08(0xFC0480F0+((x)*0x4000))
-#define MCF_INTC_L5IACK(x)         MCF_REG08(0xFC0480F4+((x)*0x4000))
-#define MCF_INTC_L6IACK(x)         MCF_REG08(0xFC0480F8+((x)*0x4000))
-#define MCF_INTC_L7IACK(x)         MCF_REG08(0xFC0480FC+((x)*0x4000))
-
-/* Bit definitions and macros for MCF_INTC_IPRH */
-#define MCF_INTC_IPRH_INT32        (0x00000001)
-#define MCF_INTC_IPRH_INT33        (0x00000002)
-#define MCF_INTC_IPRH_INT34        (0x00000004)
-#define MCF_INTC_IPRH_INT35        (0x00000008)
-#define MCF_INTC_IPRH_INT36        (0x00000010)
-#define MCF_INTC_IPRH_INT37        (0x00000020)
-#define MCF_INTC_IPRH_INT38        (0x00000040)
-#define MCF_INTC_IPRH_INT39        (0x00000080)
-#define MCF_INTC_IPRH_INT40        (0x00000100)
-#define MCF_INTC_IPRH_INT41        (0x00000200)
-#define MCF_INTC_IPRH_INT42        (0x00000400)
-#define MCF_INTC_IPRH_INT43        (0x00000800)
-#define MCF_INTC_IPRH_INT44        (0x00001000)
-#define MCF_INTC_IPRH_INT45        (0x00002000)
-#define MCF_INTC_IPRH_INT46        (0x00004000)
-#define MCF_INTC_IPRH_INT47        (0x00008000)
-#define MCF_INTC_IPRH_INT48        (0x00010000)
-#define MCF_INTC_IPRH_INT49        (0x00020000)
-#define MCF_INTC_IPRH_INT50        (0x00040000)
-#define MCF_INTC_IPRH_INT51        (0x00080000)
-#define MCF_INTC_IPRH_INT52        (0x00100000)
-#define MCF_INTC_IPRH_INT53        (0x00200000)
-#define MCF_INTC_IPRH_INT54        (0x00400000)
-#define MCF_INTC_IPRH_INT55        (0x00800000)
-#define MCF_INTC_IPRH_INT56        (0x01000000)
-#define MCF_INTC_IPRH_INT57        (0x02000000)
-#define MCF_INTC_IPRH_INT58        (0x04000000)
-#define MCF_INTC_IPRH_INT59        (0x08000000)
-#define MCF_INTC_IPRH_INT60        (0x10000000)
-#define MCF_INTC_IPRH_INT61        (0x20000000)
-#define MCF_INTC_IPRH_INT62        (0x40000000)
-#define MCF_INTC_IPRH_INT63        (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_IPRL */
-#define MCF_INTC_IPRL_INT0         (0x00000001)
-#define MCF_INTC_IPRL_INT1         (0x00000002)
-#define MCF_INTC_IPRL_INT2         (0x00000004)
-#define MCF_INTC_IPRL_INT3         (0x00000008)
-#define MCF_INTC_IPRL_INT4         (0x00000010)
-#define MCF_INTC_IPRL_INT5         (0x00000020)
-#define MCF_INTC_IPRL_INT6         (0x00000040)
-#define MCF_INTC_IPRL_INT7         (0x00000080)
-#define MCF_INTC_IPRL_INT8         (0x00000100)
-#define MCF_INTC_IPRL_INT9         (0x00000200)
-#define MCF_INTC_IPRL_INT10        (0x00000400)
-#define MCF_INTC_IPRL_INT11        (0x00000800)
-#define MCF_INTC_IPRL_INT12        (0x00001000)
-#define MCF_INTC_IPRL_INT13        (0x00002000)
-#define MCF_INTC_IPRL_INT14        (0x00004000)
-#define MCF_INTC_IPRL_INT15        (0x00008000)
-#define MCF_INTC_IPRL_INT16        (0x00010000)
-#define MCF_INTC_IPRL_INT17        (0x00020000)
-#define MCF_INTC_IPRL_INT18        (0x00040000)
-#define MCF_INTC_IPRL_INT19        (0x00080000)
-#define MCF_INTC_IPRL_INT20        (0x00100000)
-#define MCF_INTC_IPRL_INT21        (0x00200000)
-#define MCF_INTC_IPRL_INT22        (0x00400000)
-#define MCF_INTC_IPRL_INT23        (0x00800000)
-#define MCF_INTC_IPRL_INT24        (0x01000000)
-#define MCF_INTC_IPRL_INT25        (0x02000000)
-#define MCF_INTC_IPRL_INT26        (0x04000000)
-#define MCF_INTC_IPRL_INT27        (0x08000000)
-#define MCF_INTC_IPRL_INT28        (0x10000000)
-#define MCF_INTC_IPRL_INT29        (0x20000000)
-#define MCF_INTC_IPRL_INT30        (0x40000000)
-#define MCF_INTC_IPRL_INT31        (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_IMRH */
-#define MCF_INTC_IMRH_INT_MASK32   (0x00000001)
-#define MCF_INTC_IMRH_INT_MASK33   (0x00000002)
-#define MCF_INTC_IMRH_INT_MASK34   (0x00000004)
-#define MCF_INTC_IMRH_INT_MASK35   (0x00000008)
-#define MCF_INTC_IMRH_INT_MASK36   (0x00000010)
-#define MCF_INTC_IMRH_INT_MASK37   (0x00000020)
-#define MCF_INTC_IMRH_INT_MASK38   (0x00000040)
-#define MCF_INTC_IMRH_INT_MASK39   (0x00000080)
-#define MCF_INTC_IMRH_INT_MASK40   (0x00000100)
-#define MCF_INTC_IMRH_INT_MASK41   (0x00000200)
-#define MCF_INTC_IMRH_INT_MASK42   (0x00000400)
-#define MCF_INTC_IMRH_INT_MASK43   (0x00000800)
-#define MCF_INTC_IMRH_INT_MASK44   (0x00001000)
-#define MCF_INTC_IMRH_INT_MASK45   (0x00002000)
-#define MCF_INTC_IMRH_INT_MASK46   (0x00004000)
-#define MCF_INTC_IMRH_INT_MASK47   (0x00008000)
-#define MCF_INTC_IMRH_INT_MASK48   (0x00010000)
-#define MCF_INTC_IMRH_INT_MASK49   (0x00020000)
-#define MCF_INTC_IMRH_INT_MASK50   (0x00040000)
-#define MCF_INTC_IMRH_INT_MASK51   (0x00080000)
-#define MCF_INTC_IMRH_INT_MASK52   (0x00100000)
-#define MCF_INTC_IMRH_INT_MASK53   (0x00200000)
-#define MCF_INTC_IMRH_INT_MASK54   (0x00400000)
-#define MCF_INTC_IMRH_INT_MASK55   (0x00800000)
-#define MCF_INTC_IMRH_INT_MASK56   (0x01000000)
-#define MCF_INTC_IMRH_INT_MASK57   (0x02000000)
-#define MCF_INTC_IMRH_INT_MASK58   (0x04000000)
-#define MCF_INTC_IMRH_INT_MASK59   (0x08000000)
-#define MCF_INTC_IMRH_INT_MASK60   (0x10000000)
-#define MCF_INTC_IMRH_INT_MASK61   (0x20000000)
-#define MCF_INTC_IMRH_INT_MASK62   (0x40000000)
-#define MCF_INTC_IMRH_INT_MASK63   (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_IMRL */
-#define MCF_INTC_IMRL_INT_MASK0    (0x00000001)
-#define MCF_INTC_IMRL_INT_MASK1    (0x00000002)
-#define MCF_INTC_IMRL_INT_MASK2    (0x00000004)
-#define MCF_INTC_IMRL_INT_MASK3    (0x00000008)
-#define MCF_INTC_IMRL_INT_MASK4    (0x00000010)
-#define MCF_INTC_IMRL_INT_MASK5    (0x00000020)
-#define MCF_INTC_IMRL_INT_MASK6    (0x00000040)
-#define MCF_INTC_IMRL_INT_MASK7    (0x00000080)
-#define MCF_INTC_IMRL_INT_MASK8    (0x00000100)
-#define MCF_INTC_IMRL_INT_MASK9    (0x00000200)
-#define MCF_INTC_IMRL_INT_MASK10   (0x00000400)
-#define MCF_INTC_IMRL_INT_MASK11   (0x00000800)
-#define MCF_INTC_IMRL_INT_MASK12   (0x00001000)
-#define MCF_INTC_IMRL_INT_MASK13   (0x00002000)
-#define MCF_INTC_IMRL_INT_MASK14   (0x00004000)
-#define MCF_INTC_IMRL_INT_MASK15   (0x00008000)
-#define MCF_INTC_IMRL_INT_MASK16   (0x00010000)
-#define MCF_INTC_IMRL_INT_MASK17   (0x00020000)
-#define MCF_INTC_IMRL_INT_MASK18   (0x00040000)
-#define MCF_INTC_IMRL_INT_MASK19   (0x00080000)
-#define MCF_INTC_IMRL_INT_MASK20   (0x00100000)
-#define MCF_INTC_IMRL_INT_MASK21   (0x00200000)
-#define MCF_INTC_IMRL_INT_MASK22   (0x00400000)
-#define MCF_INTC_IMRL_INT_MASK23   (0x00800000)
-#define MCF_INTC_IMRL_INT_MASK24   (0x01000000)
-#define MCF_INTC_IMRL_INT_MASK25   (0x02000000)
-#define MCF_INTC_IMRL_INT_MASK26   (0x04000000)
-#define MCF_INTC_IMRL_INT_MASK27   (0x08000000)
-#define MCF_INTC_IMRL_INT_MASK28   (0x10000000)
-#define MCF_INTC_IMRL_INT_MASK29   (0x20000000)
-#define MCF_INTC_IMRL_INT_MASK30   (0x40000000)
-#define MCF_INTC_IMRL_INT_MASK31   (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_INTFRCH */
-#define MCF_INTC_INTFRCH_INTFRC32  (0x00000001)
-#define MCF_INTC_INTFRCH_INTFRC33  (0x00000002)
-#define MCF_INTC_INTFRCH_INTFRC34  (0x00000004)
-#define MCF_INTC_INTFRCH_INTFRC35  (0x00000008)
-#define MCF_INTC_INTFRCH_INTFRC36  (0x00000010)
-#define MCF_INTC_INTFRCH_INTFRC37  (0x00000020)
-#define MCF_INTC_INTFRCH_INTFRC38  (0x00000040)
-#define MCF_INTC_INTFRCH_INTFRC39  (0x00000080)
-#define MCF_INTC_INTFRCH_INTFRC40  (0x00000100)
-#define MCF_INTC_INTFRCH_INTFRC41  (0x00000200)
-#define MCF_INTC_INTFRCH_INTFRC42  (0x00000400)
-#define MCF_INTC_INTFRCH_INTFRC43  (0x00000800)
-#define MCF_INTC_INTFRCH_INTFRC44  (0x00001000)
-#define MCF_INTC_INTFRCH_INTFRC45  (0x00002000)
-#define MCF_INTC_INTFRCH_INTFRC46  (0x00004000)
-#define MCF_INTC_INTFRCH_INTFRC47  (0x00008000)
-#define MCF_INTC_INTFRCH_INTFRC48  (0x00010000)
-#define MCF_INTC_INTFRCH_INTFRC49  (0x00020000)
-#define MCF_INTC_INTFRCH_INTFRC50  (0x00040000)
-#define MCF_INTC_INTFRCH_INTFRC51  (0x00080000)
-#define MCF_INTC_INTFRCH_INTFRC52  (0x00100000)
-#define MCF_INTC_INTFRCH_INTFRC53  (0x00200000)
-#define MCF_INTC_INTFRCH_INTFRC54  (0x00400000)
-#define MCF_INTC_INTFRCH_INTFRC55  (0x00800000)
-#define MCF_INTC_INTFRCH_INTFRC56  (0x01000000)
-#define MCF_INTC_INTFRCH_INTFRC57  (0x02000000)
-#define MCF_INTC_INTFRCH_INTFRC58  (0x04000000)
-#define MCF_INTC_INTFRCH_INTFRC59  (0x08000000)
-#define MCF_INTC_INTFRCH_INTFRC60  (0x10000000)
-#define MCF_INTC_INTFRCH_INTFRC61  (0x20000000)
-#define MCF_INTC_INTFRCH_INTFRC62  (0x40000000)
-#define MCF_INTC_INTFRCH_INTFRC63  (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_INTFRCL */
-#define MCF_INTC_INTFRCL_INTFRC0   (0x00000001)
-#define MCF_INTC_INTFRCL_INTFRC1   (0x00000002)
-#define MCF_INTC_INTFRCL_INTFRC2   (0x00000004)
-#define MCF_INTC_INTFRCL_INTFRC3   (0x00000008)
-#define MCF_INTC_INTFRCL_INTFRC4   (0x00000010)
-#define MCF_INTC_INTFRCL_INTFRC5   (0x00000020)
-#define MCF_INTC_INTFRCL_INTFRC6   (0x00000040)
-#define MCF_INTC_INTFRCL_INTFRC7   (0x00000080)
-#define MCF_INTC_INTFRCL_INTFRC8   (0x00000100)
-#define MCF_INTC_INTFRCL_INTFRC9   (0x00000200)
-#define MCF_INTC_INTFRCL_INTFRC10  (0x00000400)
-#define MCF_INTC_INTFRCL_INTFRC11  (0x00000800)
-#define MCF_INTC_INTFRCL_INTFRC12  (0x00001000)
-#define MCF_INTC_INTFRCL_INTFRC13  (0x00002000)
-#define MCF_INTC_INTFRCL_INTFRC14  (0x00004000)
-#define MCF_INTC_INTFRCL_INTFRC15  (0x00008000)
-#define MCF_INTC_INTFRCL_INTFRC16  (0x00010000)
-#define MCF_INTC_INTFRCL_INTFRC17  (0x00020000)
-#define MCF_INTC_INTFRCL_INTFRC18  (0x00040000)
-#define MCF_INTC_INTFRCL_INTFRC19  (0x00080000)
-#define MCF_INTC_INTFRCL_INTFRC20  (0x00100000)
-#define MCF_INTC_INTFRCL_INTFRC21  (0x00200000)
-#define MCF_INTC_INTFRCL_INTFRC22  (0x00400000)
-#define MCF_INTC_INTFRCL_INTFRC23  (0x00800000)
-#define MCF_INTC_INTFRCL_INTFRC24  (0x01000000)
-#define MCF_INTC_INTFRCL_INTFRC25  (0x02000000)
-#define MCF_INTC_INTFRCL_INTFRC26  (0x04000000)
-#define MCF_INTC_INTFRCL_INTFRC27  (0x08000000)
-#define MCF_INTC_INTFRCL_INTFRC28  (0x10000000)
-#define MCF_INTC_INTFRCL_INTFRC29  (0x20000000)
-#define MCF_INTC_INTFRCL_INTFRC30  (0x40000000)
-#define MCF_INTC_INTFRCL_INTFRC31  (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_ICONFIG */
-#define MCF_INTC_ICONFIG_EMASK     (0x0020)
-#define MCF_INTC_ICONFIG_ELVLPRI1  (0x0200)
-#define MCF_INTC_ICONFIG_ELVLPRI2  (0x0400)
-#define MCF_INTC_ICONFIG_ELVLPRI3  (0x0800)
-#define MCF_INTC_ICONFIG_ELVLPRI4  (0x1000)
-#define MCF_INTC_ICONFIG_ELVLPRI5  (0x2000)
-#define MCF_INTC_ICONFIG_ELVLPRI6  (0x4000)
-#define MCF_INTC_ICONFIG_ELVLPRI7  (0x8000)
-
-/* Bit definitions and macros for MCF_INTC_SIMR */
-#define MCF_INTC_SIMR_SIMR(x)      (((x)&0x7F)<<0)
-
-/* Bit definitions and macros for MCF_INTC_CIMR */
-#define MCF_INTC_CIMR_CIMR(x)      (((x)&0x7F)<<0)
-
-/* Bit definitions and macros for MCF_INTC_CLMASK */
-#define MCF_INTC_CLMASK_CLMASK(x)  (((x)&0x0F)<<0)
-
-/* Bit definitions and macros for MCF_INTC_SLMASK */
-#define MCF_INTC_SLMASK_SLMASK(x)  (((x)&0x0F)<<0)
-
-/* Bit definitions and macros for MCF_INTC_ICR */
-#define MCF_INTC_ICR_IL(x)         (((x)&0x07)<<0)
-
-/* Bit definitions and macros for MCF_INTC_SWIACK */
-#define MCF_INTC_SWIACK_VECTOR(x)  (((x)&0xFF)<<0)
-
-/* Bit definitions and macros for MCF_INTC_LIACK */
-#define MCF_INTC_LIACK_VECTOR(x)   (((x)&0xFF)<<0)
-
-/********************************************************************/
-/*********************************************************************
-*
-* LCD Controller (LCDC)
-*
-*********************************************************************/
-
-/* Register read/write macros */
-#define MCF_LCDC_LSSAR                  MCF_REG32(0xFC0AC000)
-#define MCF_LCDC_LSR                    MCF_REG32(0xFC0AC004)
-#define MCF_LCDC_LVPWR                  MCF_REG32(0xFC0AC008)
-#define MCF_LCDC_LCPR                   MCF_REG32(0xFC0AC00C)
-#define MCF_LCDC_LCWHBR                 MCF_REG32(0xFC0AC010)
-#define MCF_LCDC_LCCMR                  MCF_REG32(0xFC0AC014)
-#define MCF_LCDC_LPCR                   MCF_REG32(0xFC0AC018)
-#define MCF_LCDC_LHCR                   MCF_REG32(0xFC0AC01C)
-#define MCF_LCDC_LVCR                   MCF_REG32(0xFC0AC020)
-#define MCF_LCDC_LPOR                   MCF_REG32(0xFC0AC024)
-#define MCF_LCDC_LSCR                   MCF_REG32(0xFC0AC028)
-#define MCF_LCDC_LPCCR                  MCF_REG32(0xFC0AC02C)
-#define MCF_LCDC_LDCR                   MCF_REG32(0xFC0AC030)
-#define MCF_LCDC_LRMCR                  MCF_REG32(0xFC0AC034)
-#define MCF_LCDC_LICR                   MCF_REG32(0xFC0AC038)
-#define MCF_LCDC_LIER                   MCF_REG32(0xFC0AC03C)
-#define MCF_LCDC_LISR                   MCF_REG32(0xFC0AC040)
-#define MCF_LCDC_LGWSAR                 MCF_REG32(0xFC0AC050)
-#define MCF_LCDC_LGWSR                  MCF_REG32(0xFC0AC054)
-#define MCF_LCDC_LGWVPWR                MCF_REG32(0xFC0AC058)
-#define MCF_LCDC_LGWPOR                 MCF_REG32(0xFC0AC05C)
-#define MCF_LCDC_LGWPR                  MCF_REG32(0xFC0AC060)
-#define MCF_LCDC_LGWCR                  MCF_REG32(0xFC0AC064)
-#define MCF_LCDC_LGWDCR                 MCF_REG32(0xFC0AC068)
-#define MCF_LCDC_BPLUT_BASE             MCF_REG32(0xFC0AC800)
-#define MCF_LCDC_GWLUT_BASE             MCF_REG32(0xFC0ACC00)
-
-/* Bit definitions and macros for MCF_LCDC_LSSAR */
-#define MCF_LCDC_LSSAR_SSA(x)           (((x)&0x3FFFFFFF)<<2)
-
-/* Bit definitions and macros for MCF_LCDC_LSR */
-#define MCF_LCDC_LSR_YMAX(x)            (((x)&0x000003FF)<<0)
-#define MCF_LCDC_LSR_XMAX(x)            (((x)&0x0000003F)<<20)
-
-/* Bit definitions and macros for MCF_LCDC_LVPWR */
-#define MCF_LCDC_LVPWR_VPW(x)           (((x)&0x000003FF)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_LCPR */
-#define MCF_LCDC_LCPR_CYP(x)            (((x)&0x000003FF)<<0)
-#define MCF_LCDC_LCPR_CXP(x)            (((x)&0x000003FF)<<16)
-#define MCF_LCDC_LCPR_OP                (0x10000000)
-#define MCF_LCDC_LCPR_CC(x)             (((x)&0x00000003)<<30)
-#define MCF_LCDC_LCPR_CC_TRANSPARENT    (0x00000000)
-#define MCF_LCDC_LCPR_CC_OR             (0x40000000)
-#define MCF_LCDC_LCPR_CC_XOR            (0x80000000)
-#define MCF_LCDC_LCPR_CC_AND            (0xC0000000)
-#define MCF_LCDC_LCPR_OP_ON             (0x10000000)
-#define MCF_LCDC_LCPR_OP_OFF            (0x00000000)
-
-/* Bit definitions and macros for MCF_LCDC_LCWHBR */
-#define MCF_LCDC_LCWHBR_BD(x)           (((x)&0x000000FF)<<0)
-#define MCF_LCDC_LCWHBR_CH(x)           (((x)&0x0000001F)<<16)
-#define MCF_LCDC_LCWHBR_CW(x)           (((x)&0x0000001F)<<24)
-#define MCF_LCDC_LCWHBR_BK_EN           (0x80000000)
-#define MCF_LCDC_LCWHBR_BK_EN_ON        (0x80000000)
-#define MCF_LCDC_LCWHBR_BK_EN_OFF       (0x00000000)
-
-/* Bit definitions and macros for MCF_LCDC_LCCMR */
-#define MCF_LCDC_LCCMR_CUR_COL_B(x)     (((x)&0x0000003F)<<0)
-#define MCF_LCDC_LCCMR_CUR_COL_G(x)     (((x)&0x0000003F)<<6)
-#define MCF_LCDC_LCCMR_CUR_COL_R(x)     (((x)&0x0000003F)<<12)
-
-/* Bit definitions and macros for MCF_LCDC_LPCR */
-#define MCF_LCDC_LPCR_PCD(x)            (((x)&0x0000003F)<<0)
-#define MCF_LCDC_LPCR_SHARP             (0x00000040)
-#define MCF_LCDC_LPCR_SCLKSEL           (0x00000080)
-#define MCF_LCDC_LPCR_ACD(x)            (((x)&0x0000007F)<<8)
-#define MCF_LCDC_LPCR_ACDSEL            (0x00008000)
-#define MCF_LCDC_LPCR_REV_VS            (0x00010000)
-#define MCF_LCDC_LPCR_SWAP_SEL          (0x00020000)
-#define MCF_LCDC_LPCR_ENDSEL            (0x00040000)
-#define MCF_LCDC_LPCR_SCLKIDLE          (0x00080000)
-#define MCF_LCDC_LPCR_OEPOL             (0x00100000)
-#define MCF_LCDC_LPCR_CLKPOL            (0x00200000)
-#define MCF_LCDC_LPCR_LPPOL             (0x00400000)
-#define MCF_LCDC_LPCR_FLM               (0x00800000)
-#define MCF_LCDC_LPCR_PIXPOL            (0x01000000)
-#define MCF_LCDC_LPCR_BPIX(x)           (((x)&0x00000007)<<25)
-#define MCF_LCDC_LPCR_PBSIZ(x)          (((x)&0x00000003)<<28)
-#define MCF_LCDC_LPCR_COLOR             (0x40000000)
-#define MCF_LCDC_LPCR_TFT               (0x80000000)
-#define MCF_LCDC_LPCR_MODE_MONOCGROME   (0x00000000)
-#define MCF_LCDC_LPCR_MODE_CSTN         (0x40000000)
-#define MCF_LCDC_LPCR_MODE_TFT          (0xC0000000)
-#define MCF_LCDC_LPCR_PBSIZ_1           (0x00000000)
-#define MCF_LCDC_LPCR_PBSIZ_2           (0x10000000)
-#define MCF_LCDC_LPCR_PBSIZ_4           (0x20000000)
-#define MCF_LCDC_LPCR_PBSIZ_8           (0x30000000)
-#define MCF_LCDC_LPCR_BPIX_1bpp         (0x00000000)
-#define MCF_LCDC_LPCR_BPIX_2bpp         (0x02000000)
-#define MCF_LCDC_LPCR_BPIX_4bpp         (0x04000000)
-#define MCF_LCDC_LPCR_BPIX_8bpp         (0x06000000)
-#define MCF_LCDC_LPCR_BPIX_12bpp        (0x08000000)
-#define MCF_LCDC_LPCR_BPIX_16bpp        (0x0A000000)
-#define MCF_LCDC_LPCR_BPIX_18bpp        (0x0C000000)
-
-#define MCF_LCDC_LPCR_PANEL_TYPE(x)     (((x)&0x00000003)<<30) 
-
-/* Bit definitions and macros for MCF_LCDC_LHCR */
-#define MCF_LCDC_LHCR_H_WAIT_2(x)       (((x)&0x000000FF)<<0)
-#define MCF_LCDC_LHCR_H_WAIT_1(x)       (((x)&0x000000FF)<<8)
-#define MCF_LCDC_LHCR_H_WIDTH(x)        (((x)&0x0000003F)<<26)
-
-/* Bit definitions and macros for MCF_LCDC_LVCR */
-#define MCF_LCDC_LVCR_V_WAIT_2(x)       (((x)&0x000000FF)<<0)
-#define MCF_LCDC_LVCR_V_WAIT_1(x)       (((x)&0x000000FF)<<8)
-#define MCF_LCDC_LVCR_V_WIDTH(x)      (((x)&0x0000003F)<<26)
-
-/* Bit definitions and macros for MCF_LCDC_LPOR */
-#define MCF_LCDC_LPOR_POS(x)            (((x)&0x0000001F)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_LPCCR */
-#define MCF_LCDC_LPCCR_PW(x)            (((x)&0x000000FF)<<0)
-#define MCF_LCDC_LPCCR_CC_EN            (0x00000100)
-#define MCF_LCDC_LPCCR_SCR(x)           (((x)&0x00000003)<<9)
-#define MCF_LCDC_LPCCR_LDMSK            (0x00008000)
-#define MCF_LCDC_LPCCR_CLS_HI_WIDTH(x)  (((x)&0x000001FF)<<16)
-#define MCF_LCDC_LPCCR_SCR_LINEPULSE    (0x00000000)
-#define MCF_LCDC_LPCCR_SCR_PIXELCLK     (0x00002000)
-#define MCF_LCDC_LPCCR_SCR_LCDCLOCK     (0x00004000)
-
-/* Bit definitions and macros for MCF_LCDC_LDCR */
-#define MCF_LCDC_LDCR_TM(x)             (((x)&0x0000001F)<<0)
-#define MCF_LCDC_LDCR_HM(x)             (((x)&0x0000001F)<<16)
-#define MCF_LCDC_LDCR_BURST             (0x80000000)
-
-/* Bit definitions and macros for MCF_LCDC_LRMCR */
-#define MCF_LCDC_LRMCR_SEL_REF          (0x00000001)
-
-/* Bit definitions and macros for MCF_LCDC_LICR */
-#define MCF_LCDC_LICR_INTCON            (0x00000001)
-#define MCF_LCDC_LICR_INTSYN            (0x00000004)
-#define MCF_LCDC_LICR_GW_INT_CON        (0x00000010)
-
-/* Bit definitions and macros for MCF_LCDC_LIER */
-#define MCF_LCDC_LIER_BOF_EN            (0x00000001)
-#define MCF_LCDC_LIER_EOF_EN            (0x00000002)
-#define MCF_LCDC_LIER_ERR_RES_EN        (0x00000004)
-#define MCF_LCDC_LIER_UDR_ERR_EN        (0x00000008)
-#define MCF_LCDC_LIER_GW_BOF_EN         (0x00000010)
-#define MCF_LCDC_LIER_GW_EOF_EN         (0x00000020)
-#define MCF_LCDC_LIER_GW_ERR_RES_EN     (0x00000040)
-#define MCF_LCDC_LIER_GW_UDR_ERR_EN     (0x00000080)
-
-/* Bit definitions and macros for MCF_LCDC_LISR */
-#define MCF_LCDC_LISR_BOF               (0x00000001)
-#define MCF_LCDC_LISR_EOF               (0x00000002)
-#define MCF_LCDC_LISR_ERR_RES           (0x00000004)
-#define MCF_LCDC_LISR_UDR_ERR           (0x00000008)
-#define MCF_LCDC_LISR_GW_BOF            (0x00000010)
-#define MCF_LCDC_LISR_GW_EOF            (0x00000020)
-#define MCF_LCDC_LISR_GW_ERR_RES        (0x00000040)
-#define MCF_LCDC_LISR_GW_UDR_ERR        (0x00000080)
-
-/* Bit definitions and macros for MCF_LCDC_LGWSAR */
-#define MCF_LCDC_LGWSAR_GWSA(x)         (((x)&0x3FFFFFFF)<<2)
-
-/* Bit definitions and macros for MCF_LCDC_LGWSR */
-#define MCF_LCDC_LGWSR_GWH(x)           (((x)&0x000003FF)<<0)
-#define MCF_LCDC_LGWSR_GWW(x)           (((x)&0x0000003F)<<20)
-
-/* Bit definitions and macros for MCF_LCDC_LGWVPWR */
-#define MCF_LCDC_LGWVPWR_GWVPW(x)       (((x)&0x000003FF)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_LGWPOR */
-#define MCF_LCDC_LGWPOR_GWPO(x)         (((x)&0x0000001F)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_LGWPR */
-#define MCF_LCDC_LGWPR_GWYP(x)          (((x)&0x000003FF)<<0)
-#define MCF_LCDC_LGWPR_GWXP(x)          (((x)&0x000003FF)<<16)
-
-/* Bit definitions and macros for MCF_LCDC_LGWCR */
-#define MCF_LCDC_LGWCR_GWCKB(x)         (((x)&0x0000003F)<<0)
-#define MCF_LCDC_LGWCR_GWCKG(x)         (((x)&0x0000003F)<<6)
-#define MCF_LCDC_LGWCR_GWCKR(x)         (((x)&0x0000003F)<<12)
-#define MCF_LCDC_LGWCR_GW_RVS           (0x00200000)
-#define MCF_LCDC_LGWCR_GWE              (0x00400000)
-#define MCF_LCDC_LGWCR_GWCKE            (0x00800000)
-#define MCF_LCDC_LGWCR_GWAV(x)          (((x)&0x000000FF)<<24)
-
-/* Bit definitions and macros for MCF_LCDC_LGWDCR */
-#define MCF_LCDC_LGWDCR_GWTM(x)         (((x)&0x0000001F)<<0)
-#define MCF_LCDC_LGWDCR_GWHM(x)         (((x)&0x0000001F)<<16)
-#define MCF_LCDC_LGWDCR_GWBT            (0x80000000)
-
-/* Bit definitions and macros for MCF_LCDC_LSCR */
-#define MCF_LCDC_LSCR_PS_RISE_DELAY(x)    (((x)&0x0000003F)<<26)
-#define MCF_LCDC_LSCR_CLS_RISE_DELAY(x)   (((x)&0x000000FF)<<16)
-#define MCF_LCDC_LSCR_REV_TOGGLE_DELAY(x) (((x)&0x0000000F)<<8)
-#define MCF_LCDC_LSCR_GRAY_2(x)  		  (((x)&0x0000000F)<<4)
-#define MCF_LCDC_LSCR_GRAY_1(x)  		  (((x)&0x0000000F)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_BPLUT_BASE */
-#define MCF_LCDC_BPLUT_BASE_BASE(x)     (((x)&0xFFFFFFFF)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_GWLUT_BASE */
-#define MCF_LCDC_GWLUT_BASE_BASE(x)     (((x)&0xFFFFFFFF)<<0)
-
-/*********************************************************************
- *
- * Phase Locked Loop (PLL)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_PLL_PODR              MCF_REG08(0xFC0C0000)
-#define MCF_PLL_PLLCR             MCF_REG08(0xFC0C0004)
-#define MCF_PLL_PMDR              MCF_REG08(0xFC0C0008)
-#define MCF_PLL_PFDR              MCF_REG08(0xFC0C000C)
-
-/* Bit definitions and macros for MCF_PLL_PODR */
-#define MCF_PLL_PODR_BUSDIV(x)    (((x)&0x0F)<<0)
-#define MCF_PLL_PODR_CPUDIV(x)    (((x)&0x0F)<<4)
-
-/* Bit definitions and macros for MCF_PLL_PLLCR */
-#define MCF_PLL_PLLCR_DITHDEV(x)  (((x)&0x07)<<0)
-#define MCF_PLL_PLLCR_DITHEN      (0x80)
-
-/* Bit definitions and macros for MCF_PLL_PMDR */
-#define MCF_PLL_PMDR_MODDIV(x)    (((x)&0xFF)<<0)
-
-/* Bit definitions and macros for MCF_PLL_PFDR */
-#define MCF_PLL_PFDR_MFD(x)       (((x)&0xFF)<<0)
-
-/*********************************************************************
- *
- * System Control Module Registers (SCM)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_SCM_MPR			MCF_REG32(0xFC000000)
-#define MCF_SCM_PACRA			MCF_REG32(0xFC000020)
-#define MCF_SCM_PACRB			MCF_REG32(0xFC000024)
-#define MCF_SCM_PACRC			MCF_REG32(0xFC000028)
-#define MCF_SCM_PACRD			MCF_REG32(0xFC00002C)
-#define MCF_SCM_PACRE			MCF_REG32(0xFC000040)
-#define MCF_SCM_PACRF			MCF_REG32(0xFC000044)
-
-#define MCF_SCM_BCR			MCF_REG32(0xFC040024)
-
-/*********************************************************************
- *
- * SDRAM Controller (SDRAMC)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_SDRAMC_SDMR			MCF_REG32(0xFC0B8000)
-#define MCF_SDRAMC_SDCR			MCF_REG32(0xFC0B8004)
-#define MCF_SDRAMC_SDCFG1		MCF_REG32(0xFC0B8008)
-#define MCF_SDRAMC_SDCFG2		MCF_REG32(0xFC0B800C)
-#define MCF_SDRAMC_LIMP_FIX		MCF_REG32(0xFC0B8080)
-#define MCF_SDRAMC_SDDS			MCF_REG32(0xFC0B8100)
-#define MCF_SDRAMC_SDCS0		MCF_REG32(0xFC0B8110)
-#define MCF_SDRAMC_SDCS1		MCF_REG32(0xFC0B8114)
-#define MCF_SDRAMC_SDCS2		MCF_REG32(0xFC0B8118)
-#define MCF_SDRAMC_SDCS3		MCF_REG32(0xFC0B811C)
-#define MCF_SDRAMC_SDCS(x)		MCF_REG32(0xFC0B8110+((x)*0x004))
-
-/* Bit definitions and macros for MCF_SDRAMC_SDMR */
-#define MCF_SDRAMC_SDMR_CMD		(0x00010000)
-#define MCF_SDRAMC_SDMR_AD(x)		(((x)&0x00000FFF)<<18)
-#define MCF_SDRAMC_SDMR_BNKAD(x)	(((x)&0x00000003)<<30)
-#define MCF_SDRAMC_SDMR_BNKAD_LMR	(0x00000000)
-#define MCF_SDRAMC_SDMR_BNKAD_LEMR	(0x40000000)
-
-/* Bit definitions and macros for MCF_SDRAMC_SDCR */
-#define MCF_SDRAMC_SDCR_IPALL		(0x00000002)
-#define MCF_SDRAMC_SDCR_IREF		(0x00000004)
-#define MCF_SDRAMC_SDCR_DQS_OE(x)	(((x)&0x0000000F)<<8)
-#define MCF_SDRAMC_SDCR_PS(x)		(((x)&0x00000003)<<12)
-#define MCF_SDRAMC_SDCR_RCNT(x)		(((x)&0x0000003F)<<16)
-#define MCF_SDRAMC_SDCR_OE_RULE		(0x00400000)
-#define MCF_SDRAMC_SDCR_MUX(x)		(((x)&0x00000003)<<24)
-#define MCF_SDRAMC_SDCR_REF		(0x10000000)
-#define MCF_SDRAMC_SDCR_DDR		(0x20000000)
-#define MCF_SDRAMC_SDCR_CKE		(0x40000000)
-#define MCF_SDRAMC_SDCR_MODE_EN		(0x80000000)
-#define MCF_SDRAMC_SDCR_PS_16		(0x00002000)
-#define MCF_SDRAMC_SDCR_PS_32		(0x00000000)
-
-/* Bit definitions and macros for MCF_SDRAMC_SDCFG1 */
-#define MCF_SDRAMC_SDCFG1_WTLAT(x)	(((x)&0x00000007)<<4)
-#define MCF_SDRAMC_SDCFG1_REF2ACT(x)	(((x)&0x0000000F)<<8)
-#define MCF_SDRAMC_SDCFG1_PRE2ACT(x)	(((x)&0x00000007)<<12)
-#define MCF_SDRAMC_SDCFG1_ACT2RW(x)	(((x)&0x00000007)<<16)
-#define MCF_SDRAMC_SDCFG1_RDLAT(x)	(((x)&0x0000000F)<<20)
-#define MCF_SDRAMC_SDCFG1_SWT2RD(x)	(((x)&0x00000007)<<24)
-#define MCF_SDRAMC_SDCFG1_SRD2RW(x)	(((x)&0x0000000F)<<28)
-
-/* Bit definitions and macros for MCF_SDRAMC_SDCFG2 */
-#define MCF_SDRAMC_SDCFG2_BL(x)		(((x)&0x0000000F)<<16)
-#define MCF_SDRAMC_SDCFG2_BRD2WT(x)	(((x)&0x0000000F)<<20)
-#define MCF_SDRAMC_SDCFG2_BWT2RW(x)	(((x)&0x0000000F)<<24)
-#define MCF_SDRAMC_SDCFG2_BRD2PRE(x)	(((x)&0x0000000F)<<28)
-
-/* Device Errata - LIMP mode work around */
-#define MCF_SDRAMC_REFRESH		(0x40000000)
-
-/* Bit definitions and macros for MCF_SDRAMC_SDDS */
-#define MCF_SDRAMC_SDDS_SB_D(x)		(((x)&0x00000003)<<0)
-#define MCF_SDRAMC_SDDS_SB_S(x)		(((x)&0x00000003)<<2)
-#define MCF_SDRAMC_SDDS_SB_A(x)		(((x)&0x00000003)<<4)
-#define MCF_SDRAMC_SDDS_SB_C(x)		(((x)&0x00000003)<<6)
-#define MCF_SDRAMC_SDDS_SB_E(x)		(((x)&0x00000003)<<8)
-
-/* Bit definitions and macros for MCF_SDRAMC_SDCS */
-#define MCF_SDRAMC_SDCS_CSSZ(x)		(((x)&0x0000001F)<<0)
-#define MCF_SDRAMC_SDCS_BASE(x)		(((x)&0x00000FFF)<<20)
-#define MCF_SDRAMC_SDCS_BA(x)		((x)&0xFFF00000)
-#define MCF_SDRAMC_SDCS_CSSZ_DIABLE	(0x00000000)
-#define MCF_SDRAMC_SDCS_CSSZ_1MBYTE	(0x00000013)
-#define MCF_SDRAMC_SDCS_CSSZ_2MBYTE	(0x00000014)
-#define MCF_SDRAMC_SDCS_CSSZ_4MBYTE	(0x00000015)
-#define MCF_SDRAMC_SDCS_CSSZ_8MBYTE	(0x00000016)
-#define MCF_SDRAMC_SDCS_CSSZ_16MBYTE	(0x00000017)
-#define MCF_SDRAMC_SDCS_CSSZ_32MBYTE	(0x00000018)
-#define MCF_SDRAMC_SDCS_CSSZ_64MBYTE	(0x00000019)
-#define MCF_SDRAMC_SDCS_CSSZ_128MBYTE	(0x0000001A)
-#define MCF_SDRAMC_SDCS_CSSZ_256MBYTE	(0x0000001B)
-#define MCF_SDRAMC_SDCS_CSSZ_512MBYTE	(0x0000001C)
-#define MCF_SDRAMC_SDCS_CSSZ_1GBYTE	(0x0000001D)
-#define MCF_SDRAMC_SDCS_CSSZ_2GBYTE	(0x0000001E)
-#define MCF_SDRAMC_SDCS_CSSZ_4GBYTE	(0x0000001F)
-
-/*********************************************************************
- *
- *      FlexCAN module registers
- *
- *********************************************************************/
-#define MCF_FLEXCAN_BASEADDR(x)		(0xFC020000+(x)*0x0800)
-#define MCF_FLEXCAN_CANMCR(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x00)
-#define MCF_FLEXCAN_CANCTRL(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x04)
-#define MCF_FLEXCAN_TIMER(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x08)
-#define MCF_FLEXCAN_RXGMASK(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x10)
-#define MCF_FLEXCAN_RX14MASK(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x14)
-#define MCF_FLEXCAN_RX15MASK(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x18)
-#define MCF_FLEXCAN_ERRCNT(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x1C)
-#define MCF_FLEXCAN_ERRSTAT(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x20)
-#define MCF_FLEXCAN_IMASK(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x28)
-#define MCF_FLEXCAN_IFLAG(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x30)
-
-#define MCF_FLEXCAN_MB_CNT(x,y)		MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x0)
-#define MCF_FLEXCAN_MB_ID(x,y)		MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x4)
-#define MCF_FLEXCAN_MB_DB(x,y,z)	MCF_REG08(0xFC020080+(x)*0x0800+(y)*0x10+0x8+(z)*0x1)
-
-/*
- *      FlexCAN Module Configuration Register
- */
-#define CANMCR_MDIS		(0x80000000)
-#define CANMCR_FRZ		(0x40000000)
-#define CANMCR_HALT		(0x10000000)
-#define CANMCR_SOFTRST		(0x02000000)
-#define CANMCR_FRZACK		(0x01000000)
-#define CANMCR_SUPV		(0x00800000)
-#define CANMCR_MAXMB(x)         ((x)&0x0F)
-
-/*
- *      FlexCAN Control Register
- */
-#define CANCTRL_PRESDIV(x)      (((x)&0xFF)<<24)
-#define CANCTRL_RJW(x)          (((x)&0x03)<<22)
-#define CANCTRL_PSEG1(x)        (((x)&0x07)<<19)
-#define CANCTRL_PSEG2(x)        (((x)&0x07)<<16)
-#define CANCTRL_BOFFMSK         (0x00008000)
-#define CANCTRL_ERRMSK	        (0x00004000)
-#define CANCTRL_CLKSRC		(0x00002000)
-#define CANCTRL_LPB	        (0x00001000)
-#define CANCTRL_SAMP	        (0x00000080)
-#define CANCTRL_BOFFREC         (0x00000040)
-#define CANCTRL_TSYNC           (0x00000020)
-#define CANCTRL_LBUF            (0x00000010)
-#define CANCTRL_LOM             (0x00000008)
-#define CANCTRL_PROPSEG(x)      ((x)&0x07)
-
-/*
- *      FlexCAN Error Counter Register
- */
-#define ERRCNT_RXECTR(x)        (((x)&0xFF)<<8)
-#define ERRCNT_TXECTR(x)        ((x)&0xFF)
-
-/*
- *      FlexCAN Error and Status Register
- */
-#define ERRSTAT_BITERR(x)       (((x)&0x03)<<14)
-#define ERRSTAT_ACKERR           (0x00002000)
-#define ERRSTAT_CRCERR           (0x00001000)
-#define ERRSTAT_FRMERR           (0x00000800)
-#define ERRSTAT_STFERR           (0x00000400)
-#define ERRSTAT_TXWRN            (0x00000200)
-#define ERRSTAT_RXWRN            (0x00000100)
-#define ERRSTAT_IDLE             (0x00000080)
-#define ERRSTAT_TXRX             (0x00000040)
-#define ERRSTAT_FLTCONF(x)       (((x)&0x03)<<4)
-#define ERRSTAT_BOFFINT          (0x00000004)
-#define ERRSTAT_ERRINT           (0x00000002)
-
-/*
- *      Interrupt Mask Register
- */
-#define IMASK_BUF15M		(0x8000)
-#define IMASK_BUF14M		(0x4000)
-#define IMASK_BUF13M		(0x2000)
-#define IMASK_BUF12M		(0x1000)
-#define IMASK_BUF11M		(0x0800)
-#define IMASK_BUF10M		(0x0400)
-#define IMASK_BUF9M		(0x0200)
-#define IMASK_BUF8M		(0x0100)
-#define IMASK_BUF7M		(0x0080)
-#define IMASK_BUF6M		(0x0040)
-#define IMASK_BUF5M		(0x0020)
-#define IMASK_BUF4M		(0x0010)
-#define IMASK_BUF3M		(0x0008)
-#define IMASK_BUF2M		(0x0004)
-#define IMASK_BUF1M		(0x0002)
-#define IMASK_BUF0M		(0x0001)
-#define IMASK_BUFnM(x)		(0x1<<(x))
-#define IMASK_BUFF_ENABLE_ALL	(0x1111)
-#define IMASK_BUFF_DISABLE_ALL	(0x0000)
-
-/*
- *      Interrupt Flag Register
- */
-#define IFLAG_BUF15M		(0x8000)
-#define IFLAG_BUF14M		(0x4000)
-#define IFLAG_BUF13M		(0x2000)
-#define IFLAG_BUF12M		(0x1000)
-#define IFLAG_BUF11M		(0x0800)
-#define IFLAG_BUF10M		(0x0400)
-#define IFLAG_BUF9M		(0x0200)
-#define IFLAG_BUF8M		(0x0100)
-#define IFLAG_BUF7M		(0x0080)
-#define IFLAG_BUF6M		(0x0040)
-#define IFLAG_BUF5M		(0x0020)
-#define IFLAG_BUF4M		(0x0010)
-#define IFLAG_BUF3M		(0x0008)
-#define IFLAG_BUF2M		(0x0004)
-#define IFLAG_BUF1M		(0x0002)
-#define IFLAG_BUF0M		(0x0001)
-#define IFLAG_BUFF_SET_ALL	(0xFFFF)
-#define IFLAG_BUFF_CLEAR_ALL	(0x0000)
-#define IFLAG_BUFnM(x)		(0x1<<(x))
-
-/*
- *      Message Buffers
- */
-#define MB_CNT_CODE(x)		(((x)&0x0F)<<24)
-#define MB_CNT_SRR		(0x00400000)
-#define MB_CNT_IDE		(0x00200000)
-#define MB_CNT_RTR		(0x00100000)
-#define MB_CNT_LENGTH(x)	(((x)&0x0F)<<16)
-#define MB_CNT_TIMESTAMP(x)	((x)&0xFFFF)
-#define MB_ID_STD(x)		(((x)&0x07FF)<<18)
-#define MB_ID_EXT(x)		((x)&0x3FFFF)
-
-/*********************************************************************
- *
- * Edge Port Module (EPORT)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_EPORT_EPPAR                MCF_REG16(0xFC094000)
-#define MCF_EPORT_EPDDR                MCF_REG08(0xFC094002)
-#define MCF_EPORT_EPIER                MCF_REG08(0xFC094003)
-#define MCF_EPORT_EPDR                 MCF_REG08(0xFC094004)
-#define MCF_EPORT_EPPDR                MCF_REG08(0xFC094005)
-#define MCF_EPORT_EPFR                 MCF_REG08(0xFC094006)
-
-/* Bit definitions and macros for MCF_EPORT_EPPAR */
-#define MCF_EPORT_EPPAR_EPPA1(x)       (((x)&0x0003)<<2)
-#define MCF_EPORT_EPPAR_EPPA2(x)       (((x)&0x0003)<<4)
-#define MCF_EPORT_EPPAR_EPPA3(x)       (((x)&0x0003)<<6)
-#define MCF_EPORT_EPPAR_EPPA4(x)       (((x)&0x0003)<<8)
-#define MCF_EPORT_EPPAR_EPPA5(x)       (((x)&0x0003)<<10)
-#define MCF_EPORT_EPPAR_EPPA6(x)       (((x)&0x0003)<<12)
-#define MCF_EPORT_EPPAR_EPPA7(x)       (((x)&0x0003)<<14)
-#define MCF_EPORT_EPPAR_LEVEL          (0)
-#define MCF_EPORT_EPPAR_RISING         (1)
-#define MCF_EPORT_EPPAR_FALLING        (2)
-#define MCF_EPORT_EPPAR_BOTH           (3)
-#define MCF_EPORT_EPPAR_EPPA7_LEVEL    (0x0000)
-#define MCF_EPORT_EPPAR_EPPA7_RISING   (0x4000)
-#define MCF_EPORT_EPPAR_EPPA7_FALLING  (0x8000)
-#define MCF_EPORT_EPPAR_EPPA7_BOTH     (0xC000)
-#define MCF_EPORT_EPPAR_EPPA6_LEVEL    (0x0000)
-#define MCF_EPORT_EPPAR_EPPA6_RISING   (0x1000)
-#define MCF_EPORT_EPPAR_EPPA6_FALLING  (0x2000)
-#define MCF_EPORT_EPPAR_EPPA6_BOTH     (0x3000)
-#define MCF_EPORT_EPPAR_EPPA5_LEVEL    (0x0000)
-#define MCF_EPORT_EPPAR_EPPA5_RISING   (0x0400)
-#define MCF_EPORT_EPPAR_EPPA5_FALLING  (0x0800)
-#define MCF_EPORT_EPPAR_EPPA5_BOTH     (0x0C00)
-#define MCF_EPORT_EPPAR_EPPA4_LEVEL    (0x0000)
-#define MCF_EPORT_EPPAR_EPPA4_RISING   (0x0100)
-#define MCF_EPORT_EPPAR_EPPA4_FALLING  (0x0200)
-#define MCF_EPORT_EPPAR_EPPA4_BOTH     (0x0300)
-#define MCF_EPORT_EPPAR_EPPA3_LEVEL    (0x0000)
-#define MCF_EPORT_EPPAR_EPPA3_RISING   (0x0040)
-#define MCF_EPORT_EPPAR_EPPA3_FALLING  (0x0080)
-#define MCF_EPORT_EPPAR_EPPA3_BOTH     (0x00C0)
-#define MCF_EPORT_EPPAR_EPPA2_LEVEL    (0x0000)
-#define MCF_EPORT_EPPAR_EPPA2_RISING   (0x0010)
-#define MCF_EPORT_EPPAR_EPPA2_FALLING  (0x0020)
-#define MCF_EPORT_EPPAR_EPPA2_BOTH     (0x0030)
-#define MCF_EPORT_EPPAR_EPPA1_LEVEL    (0x0000)
-#define MCF_EPORT_EPPAR_EPPA1_RISING   (0x0004)
-#define MCF_EPORT_EPPAR_EPPA1_FALLING  (0x0008)
-#define MCF_EPORT_EPPAR_EPPA1_BOTH     (0x000C)
-
-/* Bit definitions and macros for MCF_EPORT_EPDDR */
-#define MCF_EPORT_EPDDR_EPDD1          (0x02)
-#define MCF_EPORT_EPDDR_EPDD2          (0x04)
-#define MCF_EPORT_EPDDR_EPDD3          (0x08)
-#define MCF_EPORT_EPDDR_EPDD4          (0x10)
-#define MCF_EPORT_EPDDR_EPDD5          (0x20)
-#define MCF_EPORT_EPDDR_EPDD6          (0x40)
-#define MCF_EPORT_EPDDR_EPDD7          (0x80)
-
-/* Bit definitions and macros for MCF_EPORT_EPIER */
-#define MCF_EPORT_EPIER_EPIE1          (0x02)
-#define MCF_EPORT_EPIER_EPIE2          (0x04)
-#define MCF_EPORT_EPIER_EPIE3          (0x08)
-#define MCF_EPORT_EPIER_EPIE4          (0x10)
-#define MCF_EPORT_EPIER_EPIE5          (0x20)
-#define MCF_EPORT_EPIER_EPIE6          (0x40)
-#define MCF_EPORT_EPIER_EPIE7          (0x80)
-
-/* Bit definitions and macros for MCF_EPORT_EPDR */
-#define MCF_EPORT_EPDR_EPD1            (0x02)
-#define MCF_EPORT_EPDR_EPD2            (0x04)
-#define MCF_EPORT_EPDR_EPD3            (0x08)
-#define MCF_EPORT_EPDR_EPD4            (0x10)
-#define MCF_EPORT_EPDR_EPD5            (0x20)
-#define MCF_EPORT_EPDR_EPD6            (0x40)
-#define MCF_EPORT_EPDR_EPD7            (0x80)
-
-/* Bit definitions and macros for MCF_EPORT_EPPDR */
-#define MCF_EPORT_EPPDR_EPPD1          (0x02)
-#define MCF_EPORT_EPPDR_EPPD2          (0x04)
-#define MCF_EPORT_EPPDR_EPPD3          (0x08)
-#define MCF_EPORT_EPPDR_EPPD4          (0x10)
-#define MCF_EPORT_EPPDR_EPPD5          (0x20)
-#define MCF_EPORT_EPPDR_EPPD6          (0x40)
-#define MCF_EPORT_EPPDR_EPPD7          (0x80)
-
-/* Bit definitions and macros for MCF_EPORT_EPFR */
-#define MCF_EPORT_EPFR_EPF1            (0x02)
-#define MCF_EPORT_EPFR_EPF2            (0x04)
-#define MCF_EPORT_EPFR_EPF3            (0x08)
-#define MCF_EPORT_EPFR_EPF4            (0x10)
-#define MCF_EPORT_EPFR_EPF5            (0x20)
-#define MCF_EPORT_EPFR_EPF6            (0x40)
-#define MCF_EPORT_EPFR_EPF7            (0x80)
-
-/********************************************************************/
-#endif	/* m532xsim_h */
diff --git a/arch/m68knommu/include/asm/m5407sim.h b/arch/m68knommu/include/asm/m5407sim.h
deleted file mode 100644
index cc22c4a53005..000000000000
--- a/arch/m68knommu/include/asm/m5407sim.h
+++ /dev/null
@@ -1,157 +0,0 @@
-/****************************************************************************/
-
-/*
- *	m5407sim.h -- ColdFire 5407 System Integration Module support.
- *
- *	(C) Copyright 2000,  Lineo (www.lineo.com)
- *	(C) Copyright 1999,  Moreton Bay Ventures Pty Ltd.
- *
- *      Modified by David W. Miller for the MCF5307 Eval Board.
- */
-
-/****************************************************************************/
-#ifndef	m5407sim_h
-#define	m5407sim_h
-/****************************************************************************/
-
-/*
- *	Define the 5407 SIM register set addresses.
- */
-#define	MCFSIM_RSR		0x00		/* Reset Status reg (r/w) */
-#define	MCFSIM_SYPCR		0x01		/* System Protection reg (r/w)*/
-#define	MCFSIM_SWIVR		0x02		/* SW Watchdog intr reg (r/w) */
-#define	MCFSIM_SWSR		0x03		/* SW Watchdog service (r/w) */
-#define	MCFSIM_PAR		0x04		/* Pin Assignment reg (r/w) */
-#define	MCFSIM_IRQPAR		0x06		/* Interrupt Assignment reg (r/w) */
-#define	MCFSIM_PLLCR		0x08		/* PLL Controll Reg*/
-#define	MCFSIM_MPARK		0x0C		/* BUS Master Control Reg*/
-#define	MCFSIM_IPR		0x40		/* Interrupt Pend reg (r/w) */
-#define	MCFSIM_IMR		0x44		/* Interrupt Mask reg (r/w) */
-#define	MCFSIM_AVR		0x4b		/* Autovector Ctrl reg (r/w) */
-#define	MCFSIM_ICR0		0x4c		/* Intr Ctrl reg 0 (r/w) */
-#define	MCFSIM_ICR1		0x4d		/* Intr Ctrl reg 1 (r/w) */
-#define	MCFSIM_ICR2		0x4e		/* Intr Ctrl reg 2 (r/w) */
-#define	MCFSIM_ICR3		0x4f		/* Intr Ctrl reg 3 (r/w) */
-#define	MCFSIM_ICR4		0x50		/* Intr Ctrl reg 4 (r/w) */
-#define	MCFSIM_ICR5		0x51		/* Intr Ctrl reg 5 (r/w) */
-#define	MCFSIM_ICR6		0x52		/* Intr Ctrl reg 6 (r/w) */
-#define	MCFSIM_ICR7		0x53		/* Intr Ctrl reg 7 (r/w) */
-#define	MCFSIM_ICR8		0x54		/* Intr Ctrl reg 8 (r/w) */
-#define	MCFSIM_ICR9		0x55		/* Intr Ctrl reg 9 (r/w) */
-#define	MCFSIM_ICR10		0x56		/* Intr Ctrl reg 10 (r/w) */
-#define	MCFSIM_ICR11		0x57		/* Intr Ctrl reg 11 (r/w) */
-
-#define MCFSIM_CSAR0		0x80		/* CS 0 Address 0 reg (r/w) */
-#define MCFSIM_CSMR0		0x84		/* CS 0 Mask 0 reg (r/w) */
-#define MCFSIM_CSCR0		0x8a		/* CS 0 Control reg (r/w) */
-#define MCFSIM_CSAR1		0x8c		/* CS 1 Address reg (r/w) */
-#define MCFSIM_CSMR1		0x90		/* CS 1 Mask reg (r/w) */
-#define MCFSIM_CSCR1		0x96		/* CS 1 Control reg (r/w) */
-
-#define MCFSIM_CSAR2		0x98		/* CS 2 Address reg (r/w) */
-#define MCFSIM_CSMR2		0x9c		/* CS 2 Mask reg (r/w) */
-#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
-#define MCFSIM_CSAR3		0xa4		/* CS 3 Address reg (r/w) */
-#define MCFSIM_CSMR3		0xa8		/* CS 3 Mask reg (r/w) */
-#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
-#define MCFSIM_CSAR4		0xb0		/* CS 4 Address reg (r/w) */
-#define MCFSIM_CSMR4		0xb4		/* CS 4 Mask reg (r/w) */
-#define MCFSIM_CSCR4		0xba		/* CS 4 Control reg (r/w) */
-#define MCFSIM_CSAR5		0xbc		/* CS 5 Address reg (r/w) */
-#define MCFSIM_CSMR5		0xc0		/* CS 5 Mask reg (r/w) */
-#define MCFSIM_CSCR5		0xc6		/* CS 5 Control reg (r/w) */
-#define MCFSIM_CSAR6		0xc8		/* CS 6 Address reg (r/w) */
-#define MCFSIM_CSMR6		0xcc		/* CS 6 Mask reg (r/w) */
-#define MCFSIM_CSCR6		0xd2		/* CS 6 Control reg (r/w) */
-#define MCFSIM_CSAR7		0xd4		/* CS 7 Address reg (r/w) */
-#define MCFSIM_CSMR7		0xd8		/* CS 7 Mask reg (r/w) */
-#define MCFSIM_CSCR7		0xde		/* CS 7 Control reg (r/w) */
-
-#define MCFSIM_DCR		0x100		/* DRAM Control reg (r/w) */
-#define MCFSIM_DACR0		0x108		/* DRAM 0 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR0		0x10c		/* DRAM 0 Mask reg (r/w) */
-#define MCFSIM_DACR1		0x110		/* DRAM 1 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR1		0x114		/* DRAM 1 Mask reg (r/w) */
-
-#define	MCFSIM_PADDR		0x244		/* Parallel Direction (r/w) */
-#define	MCFSIM_PADAT		0x248		/* Parallel Data (r/w) */
-
-
-/*
- *	Some symbol defines for the above...
- */
-#define	MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
-#define	MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
-#define	MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
-#define	MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
-#define	MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
-#define	MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
-#define	MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
-#define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
-#define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
-
-/*
- *	Macro to set IMR register. It is 32 bits on the 5407.
- */
-#define	mcf_getimr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
-
-#define	mcf_setimr(imr)		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
-
-#define	mcf_getipr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
-
-
-/*
- *	Some symbol defines for the Parallel Port Pin Assignment Register
- */
-#define MCFSIM_PAR_DREQ0        0x40            /* Set to select DREQ0 input */
-                                                /* Clear to select par I/O */
-#define MCFSIM_PAR_DREQ1        0x20            /* Select DREQ1 input */
-                                                /* Clear to select par I/O */
-
-/*
- *       Defines for the IRQPAR Register
- */
-#define IRQ5_LEVEL4	0x80
-#define IRQ3_LEVEL6	0x40
-#define IRQ1_LEVEL2	0x20
-
-
-/*
- *	Define the Cache register flags.
- */
-#define	CACR_DEC		0x80000000	/* Enable data cache */
-#define	CACR_DWP		0x40000000	/* Data write protection */
-#define	CACR_DESB		0x20000000	/* Enable data store buffer */
-#define	CACR_DDPI		0x10000000	/* Disable CPUSHL */
-#define	CACR_DHCLK		0x08000000	/* Half data cache lock mode */
-#define	CACR_DDCM_WT		0x00000000	/* Write through cache*/
-#define	CACR_DDCM_CP		0x02000000	/* Copyback cache */
-#define	CACR_DDCM_P		0x04000000	/* No cache, precise */
-#define	CACR_DDCM_IMP		0x06000000	/* No cache, imprecise */
-#define	CACR_DCINVA		0x01000000	/* Invalidate data cache */
-#define	CACR_BEC		0x00080000	/* Enable branch cache */
-#define	CACR_BCINVA		0x00040000	/* Invalidate branch cache */
-#define	CACR_IEC		0x00008000	/* Enable instruction cache */
-#define	CACR_DNFB		0x00002000	/* Inhibited fill buffer */
-#define	CACR_IDPI		0x00001000	/* Disable CPUSHL */
-#define	CACR_IHLCK		0x00000800	/* Intruction cache half lock */
-#define	CACR_IDCM		0x00000400	/* Intruction cache inhibit */
-#define	CACR_ICINVA		0x00000100	/* Invalidate instr cache */
-
-#define	ACR_BASE_POS		24		/* Address Base */
-#define	ACR_MASK_POS		16		/* Address Mask */
-#define	ACR_ENABLE		0x00008000	/* Enable address */
-#define	ACR_USER		0x00000000	/* User mode access only */
-#define	ACR_SUPER		0x00002000	/* Supervisor mode only */
-#define	ACR_ANY			0x00004000	/* Match any access mode */
-#define	ACR_CM_WT		0x00000000	/* Write through mode */
-#define	ACR_CM_CP		0x00000020	/* Copyback mode */
-#define	ACR_CM_OFF_PRE		0x00000040	/* No cache, precise */
-#define	ACR_CM_OFF_IMP		0x00000060	/* No cache, imprecise */
-#define	ACR_WPROTECT		0x00000004	/* Write protect */
-
-/****************************************************************************/
-#endif	/* m5407sim_h */
diff --git a/arch/m68knommu/include/asm/m68360.h b/arch/m68knommu/include/asm/m68360.h
deleted file mode 100644
index eb7d39ef2855..000000000000
--- a/arch/m68knommu/include/asm/m68360.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#include "m68360_regs.h"
-#include "m68360_pram.h"
-#include "m68360_quicc.h"
-#include "m68360_enet.h"
-
-#ifdef CONFIG_M68360
-
-#define CPM_INTERRUPT    4
-
-/* see MC68360 User's Manual, p. 7-377  */
-#define CPM_VECTOR_BASE  0x04           /* 3 MSbits of CPM vector */
-
-#endif /* CONFIG_M68360 */
diff --git a/arch/m68knommu/include/asm/m68360_enet.h b/arch/m68knommu/include/asm/m68360_enet.h
deleted file mode 100644
index c36f4d059203..000000000000
--- a/arch/m68knommu/include/asm/m68360_enet.h
+++ /dev/null
@@ -1,177 +0,0 @@
-/***********************************
- * $Id: m68360_enet.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
- ***********************************
- *
- ***************************************
- * Definitions for the ETHERNET controllers
- ***************************************
- */
-
-#ifndef __ETHER_H
-#define __ETHER_H
-
-#include "quicc_simple.h"
-
-/*
- * transmit BD's
- */
-#define T_R     0x8000          /* ready bit */
-#define E_T_PAD 0x4000          /* short frame padding */
-#define T_W     0x2000          /* wrap bit */
-#define T_I     0x1000          /* interrupt on completion */
-#define T_L     0x0800          /* last in frame */
-#define T_TC    0x0400          /* transmit CRC (when last) */
-
-#define T_DEF   0x0200          /* defer indication */
-#define T_HB    0x0100          /* heartbeat */
-#define T_LC    0x0080          /* error: late collision */
-#define T_RL    0x0040          /* error: retransmission limit */
-#define T_RC    0x003c          /* retry count */
-#define T_UN    0x0002          /* error: underrun */
-#define T_CSL   0x0001          /* carier sense lost */
-#define T_ERROR (T_HB | T_LC | T_RL | T_UN | T_CSL)
-
-/*
- * receive BD's
- */
-#define R_E     0x8000          /* buffer empty */
-#define R_W     0x2000          /* wrap bit */
-#define R_I     0x1000          /* interrupt on reception */
-#define R_L     0x0800          /* last BD in frame */
-#define R_F     0x0400          /* first BD in frame */
-#define R_M     0x0100          /* received because of promisc. mode */
-
-#define R_LG    0x0020          /* frame too long */
-#define R_NO    0x0010          /* non-octet aligned */
-#define R_SH    0x0008          /* short frame */
-#define R_CR    0x0004          /* receive CRC error */
-#define R_OV    0x0002          /* receive overrun */
-#define R_CL    0x0001          /* collision */
-#define ETHER_R_ERROR (R_LG | R_NO | R_SH | R_CR | R_OV | R_CL)
-
-
-/*
- * ethernet interrupts
- */
-#define ETHERNET_GRA    0x0080  /* graceful stop complete */
-#define ETHERNET_TXE    0x0010  /* transmit error         */
-#define ETHERNET_RXF    0x0008  /* receive frame          */
-#define ETHERNET_BSY    0x0004  /* busy condition         */
-#define ETHERNET_TXB    0x0002  /* transmit buffer        */
-#define ETHERNET_RXB    0x0001  /* receive buffer         */
-
-/*
- * ethernet protocol specific mode register (PSMR)
- */
-#define ETHER_HBC       0x8000    /* heartbeat checking      */
-#define ETHER_FC        0x4000    /* force collision         */
-#define ETHER_RSH       0x2000    /* receive short frames    */
-#define ETHER_IAM       0x1000    /* individual address mode */
-#define ETHER_CRC_32    (0x2<<10) /* Enable CRC              */
-#define ETHER_PRO       0x0200    /* promiscuous             */
-#define ETHER_BRO       0x0100    /* broadcast address       */
-#define ETHER_SBT       0x0080    /* stop backoff timer      */
-#define ETHER_LPB       0x0040    /* Loop Back Mode          */
-#define ETHER_SIP       0x0020    /* sample input pins       */
-#define ETHER_LCW       0x0010    /* late collision window   */
-#define ETHER_NIB_13    (0x0<<1)  /* # of ignored bits 13    */
-#define ETHER_NIB_14    (0x1<<1)  /* # of ignored bits 14    */
-#define ETHER_NIB_15    (0x2<<1)  /* # of ignored bits 15    */
-#define ETHER_NIB_16    (0x3<<1)  /* # of ignored bits 16    */
-#define ETHER_NIB_21    (0x4<<1)  /* # of ignored bits 21    */
-#define ETHER_NIB_22    (0x5<<1)  /* # of ignored bits 22    */
-#define ETHER_NIB_23    (0x6<<1)  /* # of ignored bits 23    */
-#define ETHER_NIB_24    (0x7<<1)  /* # of ignored bits 24    */
-
-/*
- * ethernet specific parameters
- */
-#define CRC_WORD 4          /* Length in bytes of CRC */               
-#define C_PRES   0xffffffff /* preform 32 bit CRC */
-#define C_MASK   0xdebb20e3 /* comply with 32 bit CRC */       
-#define CRCEC    0x00000000
-#define ALEC     0x00000000
-#define DISFC    0x00000000
-#define PADS     0x00000000
-#define RET_LIM  0x000f     /* retry 15 times to send a frame before interrupt */
-#define ETH_MFLR 0x05ee     /* 1518 max frame size */
-#define MINFLR   0x0040     /* Minimum frame size 64 */
-#define MAXD1    0x05ee     /* Max dma count 1518 */
-#define MAXD2    0x05ee
-#define GADDR1   0x00000000 /* Clear group address */  
-#define GADDR2   0x00000000
-#define GADDR3   0x00000000    
-#define GADDR4   0x00000000    
-#define P_PER    0x00000000 /*not used */              
-#define IADDR1   0x00000000 /* Individual hash table not used */       
-#define IADDR2   0x00000000
-#define IADDR3   0x00000000    
-#define IADDR4   0x00000000            
-#define TADDR_H  0x00000000 /* clear this regs */              
-#define TADDR_M  0x00000000            
-#define TADDR_L  0x00000000            
-
-/*       SCC Parameter Ram */
-#define RFCR    0x18 /* normal operation */
-#define TFCR    0x18 /* normal operation */
-#define E_MRBLR 1518 /* Max ethernet frame length */
-
-/*
- * ethernet specific structure
- */
-typedef union {
-        unsigned char b[6];
-        struct {
-            unsigned short high;
-            unsigned short middl;
-            unsigned short low;
-        } w;
-} ETHER_ADDR;
-
-typedef struct {
-    int        max_frame_length;
-    int        promisc_mode;
-    int        reject_broadcast;
-    ETHER_ADDR phys_adr;
-} ETHER_SPECIFIC;
-
-typedef struct {
-    ETHER_ADDR     dst_addr;
-    ETHER_ADDR     src_addr;
-    unsigned short type_or_len;
-    unsigned char  data[1];
-} ETHER_FRAME;
-
-#define MAX_DATALEN 1500
-typedef struct {
-    ETHER_ADDR     dst_addr;
-    ETHER_ADDR     src_addr;
-    unsigned short type_or_len;
-    unsigned char  data[MAX_DATALEN];
-    unsigned char  fcs[CRC_WORD];
-} ETHER_MAX_FRAME;
-
-
-/*
- * Internal ethernet function prototypes
- */
-void        ether_interrupt(int scc_num);
-/* mleslie: debug */
-/* static void ethernet_rx_internal(int scc_num); */
-/* static void ethernet_tx_internal(int scc_num); */
-
-/*
- * User callable routines prototypes (ethernet specific)
- */
-void ethernet_init(int                       scc_number,
-                   alloc_routine             *alloc_buffer,
-                   free_routine              *free_buffer,
-                   store_rx_buffer_routine   *store_rx_buffer,
-                   handle_tx_error_routine   *handle_tx_error,
-                   handle_rx_error_routine   *handle_rx_error,
-                   handle_lost_error_routine *handle_lost_error,
-                   ETHER_SPECIFIC            *ether_spec);
-int  ethernet_tx(int scc_number, void *buf, int length);
-
-#endif
-
diff --git a/arch/m68knommu/include/asm/m68360_pram.h b/arch/m68knommu/include/asm/m68360_pram.h
deleted file mode 100644
index e6088bbce93d..000000000000
--- a/arch/m68knommu/include/asm/m68360_pram.h
+++ /dev/null
@@ -1,431 +0,0 @@
-/***********************************
- * $Id: m68360_pram.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
- ***********************************
- *
- ***************************************
- * Definitions of the parameter area RAM.
- * Note that different structures are overlaid
- * at the same offsets for the different modes
- * of operation.
- ***************************************
- */
-
-#ifndef __PRAM_H
-#define __PRAM_H
-
-/* Time slot assignment table */
-#define VALID_SLOT	0x8000
-#define WRAP_SLOT	0x4000
-
-/*****************************************************************
-        Global Multichannel parameter RAM
-*****************************************************************/
-struct global_multi_pram {
-    /*
-     * Global Multichannel parameter RAM
-     */
-    unsigned long   mcbase;		/* Multichannel Base pointer */
-    unsigned short  qmcstate;		/* Multichannel Controller state */
-    unsigned short  mrblr;		/* Maximum Receive Buffer Length */
-    unsigned short  tx_s_ptr;		/* TSTATx Pointer */
-    unsigned short  rxptr;		/* Current Time slot entry in TSATRx */
-    unsigned short  grfthr;		/* Global Receive frame threshold */
-    unsigned short  grfcnt;		/* Global Receive Frame Count */
-    unsigned long   intbase;		/* Multichannel Base address */
-    unsigned long   iintptr;		/* Pointer to interrupt queue */
-    unsigned short  rx_s_ptr;		/* TSTARx Pointer */
-
-    unsigned short  txptr;		/* Current Time slot entry in TSATTx */
-    unsigned long   c_mask32;		/* CRC Constant (debb20e3) */
-    unsigned short  tsatrx[32];		/* Time Slot Assignment Table Rx */
-    unsigned short  tsattx[32];		/* Time Slot Assignment Table Tx */
-    unsigned short  c_mask16;		/* CRC Constant (f0b8) */
-};
-
-/*****************************************************************
-        Quicc32 HDLC parameter RAM
-*****************************************************************/
-struct quicc32_pram {
-
-    unsigned short  tbase;		/* Tx Buffer Descriptors Base Address */
-    unsigned short  chamr;		/* Channel Mode Register */
-    unsigned long   tstate;		/* Tx Internal State */
-    unsigned long   txintr;		/* Tx Internal Data Pointer */
-    unsigned short  tbptr;		/* Tx Buffer Descriptor Pointer */
-    unsigned short  txcntr;		/* Tx Internal Byte Count */
-    unsigned long   tupack;		/* (Tx Temp) */
-    unsigned long   zistate;		/* Zero Insertion machine state */
-    unsigned long   tcrc;		/* Temp Transmit CRC */
-    unsigned short  intmask;		/* Channel's interrupt mask flags */
-    unsigned short  bdflags;		
-    unsigned short  rbase;		/* Rx Buffer Descriptors Base Address */
-    unsigned short  mflr;		/* Max Frame Length Register */
-    unsigned long   rstate;		/* Rx Internal State */
-    unsigned long   rxintr;		/* Rx Internal Data Pointer */
-    unsigned short  rbptr;		/* Rx Buffer Descriptor Pointer */
-    unsigned short  rxbyc;		/* Rx Internal Byte Count */
-    unsigned long   rpack;		/* (Rx Temp) */
-    unsigned long   zdstate;		/* Zero Deletion machine state */
-    unsigned long   rcrc;		/* Temp Transmit CRC */
-    unsigned short  maxc;		/* Max_length counter */
-    unsigned short  tmp_mb;		/* Temp */
-};
-
-
-/*****************************************************************
-        HDLC parameter RAM
-*****************************************************************/
-
-struct hdlc_pram {
-    /*
-     * SCC parameter RAM
-     */
-    unsigned short  rbase;          /* RX BD base address */
-    unsigned short  tbase;          /* TX BD base address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rtemp;          /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-    unsigned long   rcrc;           /* temp receive CRC */
-    unsigned long   tcrc;           /* temp transmit CRC */
-   
-    /*
-     * HDLC specific parameter RAM
-     */
-    unsigned char   RESERVED1[4];   /* Reserved area */
-    unsigned long   c_mask;         /* CRC constant */
-    unsigned long   c_pres;         /* CRC preset */
-    unsigned short  disfc;          /* discarded frame counter */
-    unsigned short  crcec;          /* CRC error counter */
-    unsigned short  abtsc;          /* abort sequence counter */
-    unsigned short  nmarc;          /* nonmatching address rx cnt */
-    unsigned short  retrc;          /* frame retransmission cnt */
-    unsigned short  mflr;           /* maximum frame length reg */
-    unsigned short  max_cnt;        /* maximum length counter */
-    unsigned short  rfthr;          /* received frames threshold */
-    unsigned short  rfcnt;          /* received frames count */
-    unsigned short  hmask;          /* user defined frm addr mask */
-    unsigned short  haddr1;         /* user defined frm address 1 */
-    unsigned short  haddr2;         /* user defined frm address 2 */
-    unsigned short  haddr3;         /* user defined frm address 3 */
-    unsigned short  haddr4;         /* user defined frm address 4 */
-    unsigned short  tmp;            /* temp */
-    unsigned short  tmp_mb;         /* temp */
-};
-
-
-
-/*****************************************************************
-        UART parameter RAM
-*****************************************************************/
-
-/*
- * bits in uart control characters table
- */
-#define CC_INVALID  0x8000          /* control character is valid */
-#define CC_REJ      0x4000          /* don't store char in buffer */
-#define CC_CHAR     0x00ff          /* control character */
-
-/* UART */
-struct uart_pram {
-    /*
-     * SCC parameter RAM
-     */
-    unsigned short  rbase;          /* RX BD base address */
-    unsigned short  tbase;          /* TX BD base address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rx_temp;        /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-    unsigned long   rcrc;           /* temp receive CRC */
-    unsigned long   tcrc;           /* temp transmit CRC */
-   
-    /*
-     * UART specific parameter RAM
-     */
-    unsigned char   RESERVED1[8];   /* Reserved area */
-    unsigned short  max_idl;        /* maximum idle characters */
-    unsigned short  idlc;           /* rx idle counter (internal) */
-    unsigned short  brkcr;          /* break count register */
-                   
-    unsigned short  parec;          /* Rx parity error counter */
-    unsigned short  frmer;          /* Rx framing error counter */
-    unsigned short  nosec;          /* Rx noise counter */
-    unsigned short  brkec;          /* Rx break character counter */
-    unsigned short  brkln;          /* Reaceive break length */
-                   
-    unsigned short  uaddr1;         /* address character 1 */
-    unsigned short  uaddr2;         /* address character 2 */
-    unsigned short  rtemp;          /* temp storage */
-    unsigned short  toseq;          /* Tx out of sequence char */
-    unsigned short  cc[8];          /* Rx control characters */
-    unsigned short  rccm;           /* Rx control char mask */
-    unsigned short  rccr;           /* Rx control char register */
-    unsigned short  rlbc;           /* Receive last break char */
-};
-
-
-
-/*****************************************************************
-        BISYNC parameter RAM
-*****************************************************************/
-
-struct bisync_pram {
-    /*
-     * SCC parameter RAM
-     */
-    unsigned short  rbase;          /* RX BD base address */
-    unsigned short  tbase;          /* TX BD base address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rtemp;          /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-    unsigned long   rcrc;           /* temp receive CRC */
-    unsigned long   tcrc;           /* temp transmit CRC */
-   
-    /*
-     * BISYNC specific parameter RAM
-     */
-    unsigned char   RESERVED1[4];   /* Reserved area */
-    unsigned long   crcc;           /* CRC Constant Temp Value */
-    unsigned short  prcrc;          /* Preset Receiver CRC-16/LRC */
-    unsigned short  ptcrc;          /* Preset Transmitter CRC-16/LRC */
-    unsigned short  parec;          /* Receive Parity Error Counter */
-    unsigned short  bsync;          /* BISYNC SYNC Character */
-    unsigned short  bdle;           /* BISYNC DLE Character */
-    unsigned short  cc[8];          /* Rx control characters */
-    unsigned short  rccm;           /* Receive Control Character Mask */
-};
-
-/*****************************************************************
-        IOM2 parameter RAM
-        (overlaid on tx bd[5] of SCC channel[2])
-*****************************************************************/
-struct iom2_pram {
-    unsigned short  ci_data;        /* ci data */
-    unsigned short  monitor_data;   /* monitor data */
-    unsigned short  tstate;         /* transmitter state */
-    unsigned short  rstate;         /* receiver state */
-};
-
-/*****************************************************************
-        SPI/SMC parameter RAM
-        (overlaid on tx bd[6,7] of SCC channel[2])
-*****************************************************************/
-
-#define SPI_R       0x8000          /* Ready bit in BD */
-
-struct spi_pram {
-    unsigned short  rbase;          /* Rx BD Base Address */
-    unsigned short  tbase;          /* Tx BD Base Address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rtemp;          /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-};
-
-struct smc_uart_pram {
-    unsigned short  rbase;          /* Rx BD Base Address */
-    unsigned short  tbase;          /* Tx BD Base Address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rtemp;          /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-    unsigned short  max_idl;        /* Maximum IDLE Characters */
-    unsigned short  idlc;           /* Temporary IDLE Counter */
-    unsigned short  brkln;          /* Last Rx Break Length */
-    unsigned short  brkec;          /* Rx Break Condition Counter */
-    unsigned short  brkcr;          /* Break Count Register (Tx) */
-    unsigned short  r_mask;         /* Temporary bit mask */
-};
-
-struct smc_trnsp_pram {
-    unsigned short  rbase;          /* rx BD Base Address */
-    unsigned short  tbase;          /* Tx BD Base Address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rtemp;          /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-    unsigned short  reserved[5];    /* Reserved */
-};
-
-struct idma_pram {
-    unsigned short  ibase;          /* IDMA BD Base Address */
-    unsigned short  ibptr;          /* IDMA buffer descriptor pointer */
-    unsigned long   istate;         /* IDMA internal state */
-    unsigned long   itemp;          /* IDMA temp */
-};
-
-struct ethernet_pram {
-    /*
-     * SCC parameter RAM
-     */
-    unsigned short  rbase;          /* RX BD base address */
-    unsigned short  tbase;          /* TX BD base address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rtemp;          /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-    unsigned long   rcrc;           /* temp receive CRC */
-    unsigned long   tcrc;           /* temp transmit CRC */
-   
-    /*
-     * ETHERNET specific parameter RAM
-     */
-    unsigned long   c_pres;         /* preset CRC */
-    unsigned long   c_mask;         /* constant mask for CRC */
-    unsigned long   crcec;          /* CRC error counter */
-    unsigned long   alec;           /* alighnment error counter */
-    unsigned long   disfc;          /* discard frame counter */
-    unsigned short  pads;           /* short frame PAD characters */
-    unsigned short  ret_lim;        /* retry limit threshold */
-    unsigned short  ret_cnt;        /* retry limit counter */
-    unsigned short  mflr;           /* maximum frame length reg */
-    unsigned short  minflr;         /* minimum frame length reg */
-    unsigned short  maxd1;          /* maximum DMA1 length reg */
-    unsigned short  maxd2;          /* maximum DMA2 length reg */
-    unsigned short  maxd;           /* rx max DMA */
-    unsigned short  dma_cnt;        /* rx dma counter */
-    unsigned short  max_b;          /* max bd byte count */
-    unsigned short  gaddr1;         /* group address filter 1 */
-    unsigned short  gaddr2;         /* group address filter 2 */
-    unsigned short  gaddr3;         /* group address filter 3 */
-    unsigned short  gaddr4;         /* group address filter 4 */
-    unsigned long   tbuf0_data0;    /* save area 0 - current frm */
-    unsigned long   tbuf0_data1;    /* save area 1 - current frm */
-    unsigned long   tbuf0_rba0;
-    unsigned long   tbuf0_crc;
-    unsigned short  tbuf0_bcnt;
-    union {
-        unsigned char b[6];
-        struct {
-            unsigned short high;
-            unsigned short middl;
-            unsigned short low;
-        } w;
-    } paddr;
-    unsigned short  p_per;          /* persistence */
-    unsigned short  rfbd_ptr;       /* rx first bd pointer */
-    unsigned short  tfbd_ptr;       /* tx first bd pointer */
-    unsigned short  tlbd_ptr;       /* tx last bd pointer */
-    unsigned long   tbuf1_data0;    /* save area 0 - next frame */
-    unsigned long   tbuf1_data1;    /* save area 1 - next frame */
-    unsigned long   tbuf1_rba0;
-    unsigned long   tbuf1_crc;
-    unsigned short  tbuf1_bcnt;
-    unsigned short  tx_len;         /* tx frame length counter */
-    unsigned short  iaddr1;         /* individual address filter 1*/
-    unsigned short  iaddr2;         /* individual address filter 2*/
-    unsigned short  iaddr3;         /* individual address filter 3*/
-    unsigned short  iaddr4;         /* individual address filter 4*/
-    unsigned short  boff_cnt;       /* back-off counter */
-    unsigned short  taddr_h;        /* temp address (MSB) */
-    unsigned short  taddr_m;        /* temp address */
-    unsigned short  taddr_l;        /* temp address (LSB) */
-};
-
-struct transparent_pram {
-    /*
-     * SCC parameter RAM
-     */
-    unsigned short  rbase;          /* RX BD base address */
-    unsigned short  tbase;          /* TX BD base address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rtemp;          /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-    unsigned long   rcrc;           /* temp receive CRC */
-    unsigned long   tcrc;           /* temp transmit CRC */
-   
-    /*
-     * TRANSPARENT specific parameter RAM
-     */
-    unsigned long   crc_p;          /* CRC Preset */
-    unsigned long   crc_c;          /* CRC constant */
-};
-
-struct timer_pram {
-    /*
-     * RISC timers parameter RAM
-     */
-    unsigned short  tm_base;        /* RISC timer table base adr */
-    unsigned short  tm_ptr;         /* RISC timer table pointer */
-    unsigned short  r_tmr;          /* RISC timer mode register */
-    unsigned short  r_tmv;          /* RISC timer valid register */
-    unsigned long   tm_cmd;         /* RISC timer cmd register */
-    unsigned long   tm_cnt;         /* RISC timer internal cnt */
-};
-
-#endif
diff --git a/arch/m68knommu/include/asm/m68360_quicc.h b/arch/m68knommu/include/asm/m68360_quicc.h
deleted file mode 100644
index 6d40f4d18e10..000000000000
--- a/arch/m68knommu/include/asm/m68360_quicc.h
+++ /dev/null
@@ -1,362 +0,0 @@
-/***********************************
- * $Id: m68360_quicc.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
- ***********************************
- *
- ***************************************
- * Definitions of QUICC memory structures
- ***************************************
- */
-
-#ifndef __M68360_QUICC_H
-#define __M68360_QUICC_H
-
-/*
- * include registers and
- * parameter ram definitions files
- */
-#include <asm/m68360_regs.h>
-#include <asm/m68360_pram.h>
-
-
-
-/* Buffer Descriptors */
-typedef struct quicc_bd {
-    volatile unsigned short     status;
-    volatile unsigned short     length;
-    volatile unsigned char      *buf;     /* WARNING: This is only true if *char is 32 bits */
-} QUICC_BD;
-
-
-#ifdef MOTOROLA_ORIGINAL
-struct user_data {
-    /* BASE + 0x000: user data memory */
-    volatile unsigned char      udata_bd_ucode[0x400]; /*user data bd's Ucode*/
-    volatile unsigned char      udata_bd[0x200];       /*user data Ucode     */
-    volatile unsigned char      ucode_ext[0x100];      /*Ucode Extention ram */
-    volatile unsigned char      RESERVED1[0x500];      /* Reserved area      */
-};
-#else
-struct user_data {
-    /* BASE + 0x000: user data memory */
-    volatile unsigned char      udata_bd_ucode[0x400]; /* user data, bds, Ucode*/
-    volatile unsigned char      udata_bd1[0x200];       /* user, bds */
-    volatile unsigned char      ucode_bd_scratch[0x100]; /* user, bds, ucode scratch */
-    volatile unsigned char      udata_bd2[0x100];       /* user, bds */
-    volatile unsigned char      RESERVED1[0x400];      /* Reserved area      */
-};
-#endif
-
-
-/*
- * internal ram
- */
-typedef struct quicc {
-	union {
-		struct quicc32_pram ch_pram_tbl[32];	/* 32*64(bytes) per channel */	
-		struct user_data		u;
-	}ch_or_u;	/* multipul or user space */
-
-    /* BASE + 0xc00: PARAMETER RAM */
-	union {
-		struct scc_pram {
-			union {
-				struct hdlc_pram        h;
-				struct uart_pram        u;
-				struct bisync_pram      b;
-				struct transparent_pram t;
-				unsigned char   RESERVED66[0x70];
-			} pscc;               /* scc parameter area (protocol dependent) */
-			union {
-				struct {
-					unsigned char       RESERVED70[0x10];
-					struct spi_pram     spi;
-					unsigned char       RESERVED72[0x8];
-					struct timer_pram   timer;
-				} timer_spi;
-				struct {
-					struct idma_pram idma;
-					unsigned char       RESERVED67[0x4];
-					union {
-						struct smc_uart_pram u;
-						struct smc_trnsp_pram t;
-					} psmc;
-				} idma_smc;
-			} pothers;
-		} scc;
-		struct ethernet_pram    enet_scc;
-		struct global_multi_pram        m;
-		unsigned char   pr[0x100];
-	} pram[4];
-
-    /* reserved */
-
-    /* BASE + 0x1000: INTERNAL REGISTERS */
-    /* SIM */
-    volatile unsigned long      sim_mcr;        /* module configuration reg */
-    volatile unsigned short     sim_simtr;      /* module test register     */
-    volatile unsigned char      RESERVED2[0x2]; /* Reserved area            */
-    volatile unsigned char      sim_avr;        /* auto vector reg          */
-    volatile unsigned char      sim_rsr;        /* reset status reg         */
-    volatile unsigned char      RESERVED3[0x2]; /* Reserved area            */
-    volatile unsigned char      sim_clkocr;     /* CLCO control register    */
-    volatile unsigned char      RESERVED62[0x3];        /* Reserved area    */
-    volatile unsigned short     sim_pllcr;      /* PLL control register     */
-    volatile unsigned char      RESERVED63[0x2];        /* Reserved area    */
-    volatile unsigned short     sim_cdvcr;      /* Clock devider control register */
-    volatile unsigned short     sim_pepar;      /* Port E pin assignment register */
-    volatile unsigned char      RESERVED64[0xa];        /* Reserved area    */
-    volatile unsigned char      sim_sypcr;      /* system protection control*/
-    volatile unsigned char      sim_swiv;       /* software interrupt vector*/
-    volatile unsigned char      RESERVED6[0x2]; /* Reserved area            */
-    volatile unsigned short     sim_picr;       /* periodic interrupt control reg */
-    volatile unsigned char      RESERVED7[0x2]; /* Reserved area            */
-    volatile unsigned short     sim_pitr;       /* periodic interrupt timing reg */
-    volatile unsigned char      RESERVED8[0x3]; /* Reserved area            */
-    volatile unsigned char      sim_swsr;       /* software service         */
-    volatile unsigned long      sim_bkar;       /* breakpoint address register*/
-    volatile unsigned long      sim_bkcr;       /* breakpoint control register*/
-    volatile unsigned char      RESERVED10[0x8];        /* Reserved area    */
-    /* MEMC */
-    volatile unsigned long      memc_gmr;       /* Global memory register   */
-    volatile unsigned short     memc_mstat;     /* MEMC status register     */
-    volatile unsigned char      RESERVED11[0xa];        /* Reserved area    */
-    volatile unsigned long      memc_br0;       /* base register 0          */
-    volatile unsigned long      memc_or0;       /* option register 0        */
-    volatile unsigned char      RESERVED12[0x8];        /* Reserved area    */
-    volatile unsigned long      memc_br1;       /* base register 1          */
-    volatile unsigned long      memc_or1;       /* option register 1        */
-    volatile unsigned char      RESERVED13[0x8];        /* Reserved area    */
-    volatile unsigned long      memc_br2;       /* base register 2          */
-    volatile unsigned long      memc_or2;       /* option register 2        */
-    volatile unsigned char      RESERVED14[0x8];        /* Reserved area    */
-    volatile unsigned long      memc_br3;       /* base register 3          */
-    volatile unsigned long      memc_or3;       /* option register 3        */
-    volatile unsigned char      RESERVED15[0x8];        /* Reserved area    */
-    volatile unsigned long      memc_br4;       /* base register 3          */
-    volatile unsigned long      memc_or4;       /* option register 3        */
-    volatile unsigned char      RESERVED16[0x8];        /* Reserved area    */
-    volatile unsigned long      memc_br5;       /* base register 3          */
-    volatile unsigned long      memc_or5;       /* option register 3        */
-    volatile unsigned char      RESERVED17[0x8];        /* Reserved area    */
-    volatile unsigned long      memc_br6;       /* base register 3          */
-    volatile unsigned long      memc_or6;       /* option register 3        */
-    volatile unsigned char      RESERVED18[0x8];        /* Reserved area    */
-    volatile unsigned long      memc_br7;       /* base register 3          */
-    volatile unsigned long      memc_or7;       /* option register 3        */
-    volatile unsigned char      RESERVED9[0x28];        /* Reserved area    */
-    /* TEST */
-    volatile unsigned short     test_tstmra;    /* master shift a           */
-    volatile unsigned short     test_tstmrb;    /* master shift b           */
-    volatile unsigned short     test_tstsc;     /* shift count              */
-    volatile unsigned short     test_tstrc;     /* repetition counter       */
-    volatile unsigned short     test_creg;      /* control                  */
-    volatile unsigned short     test_dreg;      /* destributed register     */
-    volatile unsigned char      RESERVED58[0x404];      /* Reserved area    */
-    /* IDMA1 */
-    volatile unsigned short     idma_iccr;      /* channel configuration reg*/
-    volatile unsigned char      RESERVED19[0x2];        /* Reserved area    */
-    volatile unsigned short     idma1_cmr;      /* dma mode reg             */
-    volatile unsigned char      RESERVED68[0x2];        /* Reserved area    */
-    volatile unsigned long      idma1_sapr;     /* dma source addr ptr      */
-    volatile unsigned long      idma1_dapr;     /* dma destination addr ptr */
-    volatile unsigned long      idma1_bcr;      /* dma byte count reg       */
-    volatile unsigned char      idma1_fcr;      /* function code reg        */
-    volatile unsigned char      RESERVED20;     /* Reserved area            */
-    volatile unsigned char      idma1_cmar;     /* channel mask reg         */
-    volatile unsigned char      RESERVED21;     /* Reserved area            */
-    volatile unsigned char      idma1_csr;      /* channel status reg       */
-    volatile unsigned char      RESERVED22[0x3];        /* Reserved area    */
-    /* SDMA */
-    volatile unsigned char      sdma_sdsr;      /* status reg               */
-    volatile unsigned char      RESERVED23;     /* Reserved area            */
-    volatile unsigned short     sdma_sdcr;      /* configuration reg        */
-    volatile unsigned long      sdma_sdar;      /* address reg              */
-    /* IDMA2 */
-    volatile unsigned char      RESERVED69[0x2];        /* Reserved area    */
-    volatile unsigned short     idma2_cmr;      /* dma mode reg             */
-    volatile unsigned long      idma2_sapr;     /* dma source addr ptr      */
-    volatile unsigned long      idma2_dapr;     /* dma destination addr ptr */
-    volatile unsigned long      idma2_bcr;      /* dma byte count reg       */
-    volatile unsigned char      idma2_fcr;      /* function code reg        */
-    volatile unsigned char      RESERVED24;     /* Reserved area            */
-    volatile unsigned char      idma2_cmar;     /* channel mask reg         */
-    volatile unsigned char      RESERVED25;     /* Reserved area            */
-    volatile unsigned char      idma2_csr;      /* channel status reg       */
-    volatile unsigned char      RESERVED26[0x7];        /* Reserved area    */
-    /* Interrupt Controller */
-    volatile unsigned long      intr_cicr;      /* CP interrupt configuration reg*/
-    volatile unsigned long      intr_cipr;      /* CP interrupt pending reg */
-    volatile unsigned long      intr_cimr;      /* CP interrupt mask reg    */
-    volatile unsigned long      intr_cisr;      /* CP interrupt in service reg*/
-    /* Parallel I/O */
-    volatile unsigned short     pio_padir;      /* port A data direction reg */
-    volatile unsigned short     pio_papar;      /* port A pin assignment reg */
-    volatile unsigned short     pio_paodr;      /* port A open drain reg    */
-    volatile unsigned short     pio_padat;      /* port A data register     */
-    volatile unsigned char      RESERVED28[0x8];        /* Reserved area    */
-    volatile unsigned short     pio_pcdir;      /* port C data direction reg*/
-    volatile unsigned short     pio_pcpar;      /* port C pin assignment reg*/
-    volatile unsigned short     pio_pcso;       /* port C special options   */
-    volatile unsigned short     pio_pcdat;      /* port C data register     */
-    volatile unsigned short     pio_pcint;      /* port C interrupt cntrl reg */
-    volatile unsigned char      RESERVED29[0x16];       /* Reserved area    */
-    /* Timer */
-    volatile unsigned short     timer_tgcr;     /* timer global configuration reg */
-    volatile unsigned char      RESERVED30[0xe];        /* Reserved area    */
-    volatile unsigned short     timer_tmr1;     /* timer 1 mode reg         */
-    volatile unsigned short     timer_tmr2;     /* timer 2 mode reg         */
-    volatile unsigned short     timer_trr1;     /* timer 1 referance reg    */
-    volatile unsigned short     timer_trr2;     /* timer 2 referance reg    */
-    volatile unsigned short     timer_tcr1;     /* timer 1 capture reg      */
-    volatile unsigned short     timer_tcr2;     /* timer 2 capture reg      */
-    volatile unsigned short     timer_tcn1;     /* timer 1 counter reg      */
-    volatile unsigned short     timer_tcn2;     /* timer 2 counter reg      */
-    volatile unsigned short     timer_tmr3;     /* timer 3 mode reg         */
-    volatile unsigned short     timer_tmr4;     /* timer 4 mode reg         */
-    volatile unsigned short     timer_trr3;     /* timer 3 referance reg    */
-    volatile unsigned short     timer_trr4;     /* timer 4 referance reg    */
-    volatile unsigned short     timer_tcr3;     /* timer 3 capture reg      */
-    volatile unsigned short     timer_tcr4;     /* timer 4 capture reg      */
-    volatile unsigned short     timer_tcn3;     /* timer 3 counter reg      */
-    volatile unsigned short     timer_tcn4;     /* timer 4 counter reg      */
-    volatile unsigned short     timer_ter1;     /* timer 1 event reg        */
-    volatile unsigned short     timer_ter2;     /* timer 2 event reg        */
-    volatile unsigned short     timer_ter3;     /* timer 3 event reg        */
-    volatile unsigned short     timer_ter4;     /* timer 4 event reg        */
-    volatile unsigned char      RESERVED34[0x8];        /* Reserved area    */
-    /* CP */
-    volatile unsigned short     cp_cr;          /* command register         */
-    volatile unsigned char      RESERVED35[0x2];        /* Reserved area    */
-    volatile unsigned short     cp_rccr;        /* main configuration reg   */
-    volatile unsigned char      RESERVED37;     /* Reserved area            */
-    volatile unsigned char      cp_rmds;        /* development support status reg */
-    volatile unsigned long      cp_rmdr;        /* development support control reg */
-    volatile unsigned short     cp_rctr1;       /* ram break register 1     */
-    volatile unsigned short     cp_rctr2;       /* ram break register 2     */
-    volatile unsigned short     cp_rctr3;       /* ram break register 3     */
-    volatile unsigned short     cp_rctr4;       /* ram break register 4     */
-    volatile unsigned char      RESERVED59[0x2];        /* Reserved area    */
-    volatile unsigned short     cp_rter;        /* RISC timers event reg    */
-    volatile unsigned char      RESERVED38[0x2];        /* Reserved area    */
-    volatile unsigned short     cp_rtmr;        /* RISC timers mask reg     */
-    volatile unsigned char      RESERVED39[0x14];       /* Reserved area    */
-    /* BRG */
-    union {
-        volatile unsigned long l;
-        struct {
-            volatile unsigned short BRGC_RESERV:14;
-            volatile unsigned short rst:1;
-            volatile unsigned short en:1;
-            volatile unsigned short extc:2;
-            volatile unsigned short atb:1;
-            volatile unsigned short cd:12;
-            volatile unsigned short div16:1;
-        } b;
-    } brgc[4];                                  /* BRG1-BRG4 configuration regs*/
-    /* SCC registers */
-    struct scc_regs {
-        union {
-            struct {
-                /* Low word. */
-                volatile unsigned short GSMR_RESERV2:1;
-                volatile unsigned short edge:2;
-                volatile unsigned short tci:1;
-                volatile unsigned short tsnc:2;
-                volatile unsigned short rinv:1;
-                volatile unsigned short tinv:1;
-                volatile unsigned short tpl:3;
-                volatile unsigned short tpp:2;
-                volatile unsigned short tend:1;
-                volatile unsigned short tdcr:2;
-                volatile unsigned short rdcr:2;
-                volatile unsigned short renc:3;
-                volatile unsigned short tenc:3;
-                volatile unsigned short diag:2;
-                volatile unsigned short enr:1;
-                volatile unsigned short ent:1;
-                volatile unsigned short mode:4;
-                /* High word. */
-                volatile unsigned short GSMR_RESERV1:14;
-                volatile unsigned short pri:1;
-                volatile unsigned short gde:1;
-                volatile unsigned short tcrc:2;
-                volatile unsigned short revd:1;
-                volatile unsigned short trx:1;
-                volatile unsigned short ttx:1;
-                volatile unsigned short cdp:1;
-                volatile unsigned short ctsp:1;
-                volatile unsigned short cds:1;
-                volatile unsigned short ctss:1;
-                volatile unsigned short tfl:1;
-                volatile unsigned short rfw:1;
-                volatile unsigned short txsy:1;
-                volatile unsigned short synl:2;
-                volatile unsigned short rtsm:1;
-                volatile unsigned short rsyn:1;
-            } b;
-            struct {
-                volatile unsigned long low;
-                volatile unsigned long high;
-            } w;
-        } scc_gsmr;                         /* SCC general mode reg         */
-        volatile unsigned short scc_psmr;   /* protocol specific mode reg   */
-        volatile unsigned char  RESERVED42[0x2]; /* Reserved area           */
-        volatile unsigned short scc_todr; /* SCC transmit on demand         */
-        volatile unsigned short scc_dsr;        /* SCC data sync reg        */
-        volatile unsigned short scc_scce;       /* SCC event reg            */
-        volatile unsigned char  RESERVED43[0x2];/* Reserved area            */
-        volatile unsigned short scc_sccm;       /* SCC mask reg             */
-        volatile unsigned char  RESERVED44[0x1];/* Reserved area            */
-        volatile unsigned char  scc_sccs;       /* SCC status reg           */
-        volatile unsigned char  RESERVED45[0x8]; /* Reserved area           */
-    } scc_regs[4];
-    /* SMC */
-    struct smc_regs {
-        volatile unsigned char  RESERVED46[0x2]; /* Reserved area           */
-        volatile unsigned short smc_smcmr;       /* SMC mode reg            */
-        volatile unsigned char  RESERVED60[0x2]; /* Reserved area           */
-        volatile unsigned char  smc_smce;        /* SMC event reg           */
-        volatile unsigned char  RESERVED47[0x3]; /* Reserved area           */
-        volatile unsigned char  smc_smcm;        /* SMC mask reg            */
-        volatile unsigned char  RESERVED48[0x5]; /* Reserved area           */
-    } smc_regs[2];
-    /* SPI */
-    volatile unsigned short     spi_spmode;     /* SPI mode reg             */
-    volatile unsigned char      RESERVED51[0x4];        /* Reserved area    */
-    volatile unsigned char      spi_spie;       /* SPI event reg            */
-    volatile unsigned char      RESERVED52[0x3];        /* Reserved area    */
-    volatile unsigned char      spi_spim;       /* SPI mask reg             */
-    volatile unsigned char      RESERVED53[0x2];        /* Reserved area    */
-    volatile unsigned char      spi_spcom;      /* SPI command reg          */
-    volatile unsigned char      RESERVED54[0x4];        /* Reserved area    */
-    /* PIP */
-    volatile unsigned short     pip_pipc;       /* pip configuration reg    */
-    volatile unsigned char      RESERVED65[0x2];        /* Reserved area    */
-    volatile unsigned short     pip_ptpr;       /* pip timing parameters reg */
-    volatile unsigned long      pip_pbdir;      /* port b data direction reg */
-    volatile unsigned long      pip_pbpar;      /* port b pin assignment reg */
-    volatile unsigned long      pip_pbodr;      /* port b open drain reg    */
-    volatile unsigned long      pip_pbdat;      /* port b data reg          */
-    volatile unsigned char      RESERVED71[0x18];       /* Reserved area    */
-    /* Serial Interface */
-    volatile unsigned long      si_simode;      /* SI mode register         */
-    volatile unsigned char      si_sigmr;       /* SI global mode register  */
-    volatile unsigned char      RESERVED55;     /* Reserved area            */
-    volatile unsigned char      si_sistr;       /* SI status register       */
-    volatile unsigned char      si_sicmr;       /* SI command register      */
-    volatile unsigned char      RESERVED56[0x4]; /* Reserved area           */
-    volatile unsigned long      si_sicr;        /* SI clock routing         */
-    volatile unsigned long      si_sirp;        /* SI ram pointers          */
-    volatile unsigned char      RESERVED57[0xc]; /* Reserved area           */
-    volatile unsigned short     si_siram[0x80]; /* SI routing ram          */
-} QUICC;
-
-#endif
-
-/*
- * Local variables:
- *  c-indent-level: 4
- *  c-basic-offset: 4
- *  tab-width: 4
- * End:
- */
diff --git a/arch/m68knommu/include/asm/m68360_regs.h b/arch/m68knommu/include/asm/m68360_regs.h
deleted file mode 100644
index d57217ca4f27..000000000000
--- a/arch/m68knommu/include/asm/m68360_regs.h
+++ /dev/null
@@ -1,408 +0,0 @@
-/***********************************
- * $Id: m68360_regs.h,v 1.2 2002/10/26 15:03:55 gerg Exp $
- ***********************************
- *
- ***************************************
- * Definitions of the QUICC registers
- ***************************************
- */
-
-#ifndef __REGISTERS_H
-#define __REGISTERS_H
-
-#define CLEAR_BIT(x, bit)  x =bit 
-
-/*****************************************************************
-        Command Register
-*****************************************************************/
-
-/* bit fields within command register */
-#define SOFTWARE_RESET  0x8000
-#define CMD_OPCODE      0x0f00
-#define CMD_CHANNEL     0x00f0
-#define CMD_FLAG        0x0001
-
-/* general command opcodes */
-#define INIT_RXTX_PARAMS        0x0000
-#define INIT_RX_PARAMS          0x0100
-#define INIT_TX_PARAMS          0x0200
-#define ENTER_HUNT_MODE         0x0300
-#define STOP_TX                 0x0400
-#define GR_STOP_TX              0x0500
-#define RESTART_TX              0x0600
-#define CLOSE_RX_BD             0x0700
-#define SET_ENET_GROUP          0x0800
-#define RESET_ENET_GROUP        0x0900
-
-/* quicc32 CP commands */
-#define STOP_TX_32		0x0e00	/*add chan# bits 2-6 */
-#define ENTER_HUNT_MODE_32	0x1e00
-
-/* quicc32 mask/event SCC register */
-#define GOV	0x01
-#define GUN	0x02
-#define GINT	0x04
-#define IQOV	0x08
-
-
-/* Timer commands */
-#define SET_TIMER               0x0800
-
-/* Multi channel Interrupt structure */
-#define INTR_VALID	0x8000	/* Valid interrupt entry */
-#define INTR_WRAP	0x4000	/* Wrap bit in the interrupt entry table */
-#define INTR_CH_NU	0x07c0	/* Channel Num in interrupt table */
-#define INTR_MASK_BITS	0x383f
-
-/*
- * General SCC mode register (GSMR)
- */
-
-#define MODE_HDLC               0x0
-#define MODE_APPLE_TALK         0x2
-#define MODE_SS7                0x3
-#define MODE_UART               0x4
-#define MODE_PROFIBUS           0x5
-#define MODE_ASYNC_HDLC         0x6
-#define MODE_V14                0x7
-#define MODE_BISYNC             0x8
-#define MODE_DDCMP              0x9
-#define MODE_MULTI_CHANNEL      0xa
-#define MODE_ETHERNET           0xc
-
-#define DIAG_NORMAL             0x0
-#define DIAG_LOCAL_LPB          0x1
-#define DIAG_AUTO_ECHO          0x2
-#define DIAG_LBP_ECHO           0x3
-
-/* For RENC and TENC fields in GSMR */
-#define ENC_NRZ                 0x0
-#define ENC_NRZI                0x1
-#define ENC_FM0                 0x2
-#define ENC_MANCH               0x4
-#define ENC_DIFF_MANC           0x6
-
-/* For TDCR and RDCR fields in GSMR */
-#define CLOCK_RATE_1            0x0
-#define CLOCK_RATE_8            0x1
-#define CLOCK_RATE_16           0x2
-#define CLOCK_RATE_32           0x3
-
-#define TPP_00                  0x0
-#define TPP_10                  0x1
-#define TPP_01                  0x2
-#define TPP_11                  0x3
-
-#define TPL_NO                  0x0
-#define TPL_8                   0x1
-#define TPL_16                  0x2
-#define TPL_32                  0x3
-#define TPL_48                  0x4
-#define TPL_64                  0x5
-#define TPL_128                 0x6
-
-#define TSNC_INFINITE           0x0
-#define TSNC_14_65              0x1
-#define TSNC_4_15               0x2
-#define TSNC_3_1                0x3
-
-#define EDGE_BOTH               0x0
-#define EDGE_POS                0x1
-#define EDGE_NEG                0x2
-#define EDGE_NO                 0x3
-
-#define SYNL_NO                 0x0
-#define SYNL_4                  0x1
-#define SYNL_8                  0x2
-#define SYNL_16                 0x3
-
-#define TCRC_CCITT16            0x0
-#define TCRC_CRC16              0x1
-#define TCRC_CCITT32            0x2
-
-
-/*****************************************************************
-        TODR (Transmit on demand) Register
-*****************************************************************/
-#define TODR_TOD        0x8000  /* Transmit on demand */
-
-
-/*****************************************************************
-        CICR register settings
-*****************************************************************/
-
-/* note that relative irq priorities of the SCCs can be reordered
- * if desired - see p. 7-377 of the MC68360UM */
-#define CICR_SCA_SCC1           ((uint)0x00000000)      /* SCC1 @ SCCa */
-#define CICR_SCB_SCC2           ((uint)0x00040000)      /* SCC2 @ SCCb */
-#define CICR_SCC_SCC3           ((uint)0x00200000)      /* SCC3 @ SCCc */
-#define CICR_SCD_SCC4           ((uint)0x00c00000)      /* SCC4 @ SCCd */
-
-#define CICR_IRL_MASK           ((uint)0x0000e000)      /* Core interrupt */
-#define CICR_HP_MASK            ((uint)0x00001f00)      /* Hi-pri int. */
-#define CICR_VBA_MASK           ((uint)0x000000e0)      /* Vector Base Address */
-#define CICR_SPS                ((uint)0x00000001)      /* SCC Spread */
-
-
-/*****************************************************************
-       Interrupt bits for CIPR and CIMR (MC68360UM p. 7-379)
-*****************************************************************/
-
-#define INTR_PIO_PC0    0x80000000      /* parallel I/O C bit 0 */
-#define INTR_SCC1       0x40000000      /* SCC port 1 */
-#define INTR_SCC2       0x20000000      /* SCC port 2 */
-#define INTR_SCC3       0x10000000      /* SCC port 3 */
-#define INTR_SCC4       0x08000000      /* SCC port 4 */
-#define INTR_PIO_PC1    0x04000000      /* parallel i/o C bit 1 */
-#define INTR_TIMER1     0x02000000      /* timer 1 */
-#define INTR_PIO_PC2    0x01000000      /* parallel i/o C bit 2 */
-#define INTR_PIO_PC3    0x00800000      /* parallel i/o C bit 3 */
-#define INTR_SDMA_BERR  0x00400000      /* SDMA channel bus error */
-#define INTR_DMA1       0x00200000      /* idma 1 */
-#define INTR_DMA2       0x00100000      /* idma 2 */
-#define INTR_TIMER2     0x00040000      /* timer 2 */
-#define INTR_CP_TIMER   0x00020000      /* CP timer */
-#define INTR_PIP_STATUS 0x00010000      /* PIP status */
-#define INTR_PIO_PC4    0x00008000      /* parallel i/o C bit 4 */
-#define INTR_PIO_PC5    0x00004000      /* parallel i/o C bit 5 */
-#define INTR_TIMER3     0x00001000      /* timer 3 */
-#define INTR_PIO_PC6    0x00000800      /* parallel i/o C bit 6 */
-#define INTR_PIO_PC7    0x00000400      /* parallel i/o C bit 7 */
-#define INTR_PIO_PC8    0x00000200      /* parallel i/o C bit 8 */
-#define INTR_TIMER4     0x00000080      /* timer 4 */
-#define INTR_PIO_PC9    0x00000040      /* parallel i/o C bit 9 */
-#define INTR_SCP        0x00000020      /* SCP */
-#define INTR_SMC1       0x00000010      /* SMC 1 */
-#define INTR_SMC2       0x00000008      /* SMC 2 */
-#define INTR_PIO_PC10   0x00000004      /* parallel i/o C bit 10 */
-#define INTR_PIO_PC11   0x00000002      /* parallel i/o C bit 11 */
-#define INTR_ERR        0x00000001      /* error */
-
-
-/*****************************************************************
-        CPM Interrupt vector encodings (MC68360UM p. 7-376)
-*****************************************************************/
-
-#define CPMVEC_NR		32
-#define CPMVEC_PIO_PC0		0x1f
-#define CPMVEC_SCC1		0x1e
-#define CPMVEC_SCC2		0x1d
-#define CPMVEC_SCC3		0x1c
-#define CPMVEC_SCC4		0x1b
-#define CPMVEC_PIO_PC1		0x1a
-#define CPMVEC_TIMER1		0x19
-#define CPMVEC_PIO_PC2		0x18
-#define CPMVEC_PIO_PC3		0x17
-#define CPMVEC_SDMA_CB_ERR	0x16
-#define CPMVEC_IDMA1		0x15
-#define CPMVEC_IDMA2		0x14
-#define CPMVEC_RESERVED3	0x13
-#define CPMVEC_TIMER2		0x12
-#define CPMVEC_RISCTIMER	0x11
-#define CPMVEC_RESERVED2	0x10
-#define CPMVEC_PIO_PC4		0x0f
-#define CPMVEC_PIO_PC5		0x0e
-#define CPMVEC_TIMER3		0x0c
-#define CPMVEC_PIO_PC6		0x0b
-#define CPMVEC_PIO_PC7		0x0a
-#define CPMVEC_PIO_PC8		0x09
-#define CPMVEC_RESERVED1	0x08
-#define CPMVEC_TIMER4		0x07
-#define CPMVEC_PIO_PC9		0x06
-#define CPMVEC_SPI		0x05
-#define CPMVEC_SMC1		0x04
-#define CPMVEC_SMC2		0x03
-#define CPMVEC_PIO_PC10		0x02
-#define CPMVEC_PIO_PC11		0x01
-#define CPMVEC_ERROR		0x00
-
-/* #define CPMVEC_PIO_PC0		((ushort)0x1f) */
-/* #define CPMVEC_SCC1		((ushort)0x1e) */
-/* #define CPMVEC_SCC2		((ushort)0x1d) */
-/* #define CPMVEC_SCC3		((ushort)0x1c) */
-/* #define CPMVEC_SCC4		((ushort)0x1b) */
-/* #define CPMVEC_PIO_PC1		((ushort)0x1a) */
-/* #define CPMVEC_TIMER1		((ushort)0x19) */
-/* #define CPMVEC_PIO_PC2		((ushort)0x18) */
-/* #define CPMVEC_PIO_PC3		((ushort)0x17) */
-/* #define CPMVEC_SDMA_CB_ERR	((ushort)0x16) */
-/* #define CPMVEC_IDMA1		((ushort)0x15) */
-/* #define CPMVEC_IDMA2		((ushort)0x14) */
-/* #define CPMVEC_RESERVED3	((ushort)0x13) */
-/* #define CPMVEC_TIMER2		((ushort)0x12) */
-/* #define CPMVEC_RISCTIMER	((ushort)0x11) */
-/* #define CPMVEC_RESERVED2	((ushort)0x10) */
-/* #define CPMVEC_PIO_PC4		((ushort)0x0f) */
-/* #define CPMVEC_PIO_PC5		((ushort)0x0e) */
-/* #define CPMVEC_TIMER3		((ushort)0x0c) */
-/* #define CPMVEC_PIO_PC6		((ushort)0x0b) */
-/* #define CPMVEC_PIO_PC7		((ushort)0x0a) */
-/* #define CPMVEC_PIO_PC8		((ushort)0x09) */
-/* #define CPMVEC_RESERVED1	((ushort)0x08) */
-/* #define CPMVEC_TIMER4		((ushort)0x07) */
-/* #define CPMVEC_PIO_PC9		((ushort)0x06) */
-/* #define CPMVEC_SPI		((ushort)0x05) */
-/* #define CPMVEC_SMC1		((ushort)0x04) */
-/* #define CPMVEC_SMC2		((ushort)0x03) */
-/* #define CPMVEC_PIO_PC10		((ushort)0x02) */
-/* #define CPMVEC_PIO_PC11		((ushort)0x01) */
-/* #define CPMVEC_ERROR		((ushort)0x00) */
-
-
-/*****************************************************************
- *        PIO control registers
- *****************************************************************/
-
-/* Port A - See 360UM p. 7-358
- * 
- *  Note that most of these pins have alternate functions
- */
-
-
-/* The macros are nice, but there are all sorts of references to 1-indexed
- * facilities on the 68360... */
-/* #define PA_RXD(n)	((ushort)(0x01<<(2*n))) */
-/* #define PA_TXD(n)	((ushort)(0x02<<(2*n))) */
-
-#define PA_RXD1		((ushort)0x0001)
-#define PA_TXD1		((ushort)0x0002)
-#define PA_RXD2		((ushort)0x0004)
-#define PA_TXD2		((ushort)0x0008)
-#define PA_RXD3		((ushort)0x0010)
-#define PA_TXD3		((ushort)0x0020)
-#define PA_RXD4		((ushort)0x0040)
-#define PA_TXD4		((ushort)0x0080)
-
-#define PA_CLK1		((ushort)0x0100)
-#define PA_CLK2		((ushort)0x0200)
-#define PA_CLK3		((ushort)0x0400)
-#define PA_CLK4		((ushort)0x0800)
-#define PA_CLK5		((ushort)0x1000)
-#define PA_CLK6		((ushort)0x2000)
-#define PA_CLK7		((ushort)0x4000)
-#define PA_CLK8		((ushort)0x8000)
-
-
-/* Port B - See 360UM p. 7-362
- */
-
-
-/* Port C - See 360UM p. 7-365
- */
-
-#define PC_RTS1		((ushort)0x0001)
-#define PC_RTS2		((ushort)0x0002)
-#define PC__RTS3	((ushort)0x0004) /* !RTS3 */
-#define PC__RTS4	((ushort)0x0008) /* !RTS4 */
-
-#define PC_CTS1		((ushort)0x0010)
-#define PC_CD1		((ushort)0x0020)
-#define PC_CTS2		((ushort)0x0040)
-#define PC_CD2		((ushort)0x0080)
-#define PC_CTS3		((ushort)0x0100)
-#define PC_CD3		((ushort)0x0200)
-#define PC_CTS4		((ushort)0x0400)
-#define PC_CD4		((ushort)0x0800)
-
-
-
-/*****************************************************************
-        chip select option register
-*****************************************************************/
-#define DTACK           0xe000
-#define ADR_MASK        0x1ffc
-#define RDWR_MASK       0x0002
-#define FC_MASK         0x0001
-
-/*****************************************************************
-        tbase and rbase registers
-*****************************************************************/
-#define TBD_ADDR(quicc,pram) ((struct quicc_bd *) \
-    (quicc->ch_or_u.u.udata_bd_ucode + pram->tbase))
-#define RBD_ADDR(quicc,pram) ((struct quicc_bd *) \
-    (quicc->ch_or_u.u.udata_bd_ucode + pram->rbase))
-#define TBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \
-    (quicc->ch_or_u.u.udata_bd_ucode + pram->tbptr))
-#define RBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \
-    (quicc->ch_or_u.u.udata_bd_ucode + pram->rbptr))
-#define TBD_SET_CUR_ADDR(bd,quicc,pram) pram->tbptr = \
-    ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode)))
-#define RBD_SET_CUR_ADDR(bd,quicc,pram) pram->rbptr = \
-    ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode)))
-#define INCREASE_TBD(bd,quicc,pram) {  \
-    if((bd)->status & T_W)             \
-        (bd) = TBD_ADDR(quicc,pram);   \
-    else                               \
-        (bd)++;                        \
-}
-#define DECREASE_TBD(bd,quicc,pram) {  \
-    if ((bd) == TBD_ADDR(quicc, pram)) \
-        while (!((bd)->status & T_W))  \
-            (bd)++;                    \
-    else                               \
-        (bd)--;                        \
-}
-#define INCREASE_RBD(bd,quicc,pram) {  \
-    if((bd)->status & R_W)             \
-        (bd) = RBD_ADDR(quicc,pram);   \
-    else                               \
-        (bd)++;                        \
-}
-#define DECREASE_RBD(bd,quicc,pram) {  \
-    if ((bd) == RBD_ADDR(quicc, pram)) \
-        while (!((bd)->status & T_W))  \
-            (bd)++;                    \
-    else                               \
-        (bd)--;                        \
-}
-
-/*****************************************************************
-        Macros for Multi channel
-*****************************************************************/
-#define QMC_BASE(quicc,page) (struct global_multi_pram *)(&quicc->pram[page])
-#define MCBASE(quicc,page) (unsigned long)(quicc->pram[page].m.mcbase)
-#define CHANNEL_PRAM_BASE(quicc,channel) ((struct quicc32_pram *) \
-		(&(quicc->ch_or_u.ch_pram_tbl[channel])))
-#define TBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \
-    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbase)))
-#define RBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \
-    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbase)))
-#define TBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \
-    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbptr)))
-#define RBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \
-    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbptr)))
-#define TBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \
-     CHANNEL_PRAM_BASE(quicc,channel)->tbptr = \
-    ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page))))
-#define RBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \
-     CHANNEL_PRAM_BASE(quicc,channel)->rbptr = \
-    ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page))))
-
-#define INCREASE_TBD_32(bd,quicc,page,channel) {  \
-    if((bd)->status & T_W)                        \
-        (bd) = TBD_32_ADDR(quicc,page,channel);   \
-    else                                          \
-        (bd)++;                                   \
-}
-#define DECREASE_TBD_32(bd,quicc,page,channel) {  \
-    if ((bd) == TBD_32_ADDR(quicc, page,channel)) \
-        while (!((bd)->status & T_W))             \
-            (bd)++;                               \
-    else                                          \
-        (bd)--;                                   \
-}
-#define INCREASE_RBD_32(bd,quicc,page,channel) {  \
-    if((bd)->status & R_W)                        \
-        (bd) = RBD_32_ADDR(quicc,page,channel);   \
-    else                                          \
-        (bd)++;                                   \
-}
-#define DECREASE_RBD_32(bd,quicc,page,channel) {  \
-    if ((bd) == RBD_32_ADDR(quicc, page,channel)) \
-        while (!((bd)->status & T_W))             \
-            (bd)++;                               \
-    else                                          \
-        (bd)--;                                   \
-}
-
-#endif
diff --git a/arch/m68knommu/include/asm/machdep.h b/arch/m68knommu/include/asm/machdep.h
deleted file mode 100644
index de9f47a51cc2..000000000000
--- a/arch/m68knommu/include/asm/machdep.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef _M68KNOMMU_MACHDEP_H
-#define _M68KNOMMU_MACHDEP_H
-
-#include <linux/interrupt.h>
-
-/* Hardware clock functions */
-extern void hw_timer_init(void);
-extern unsigned long hw_timer_offset(void);
-
-extern irqreturn_t arch_timer_interrupt(int irq, void *dummy);
-
-/* Machine dependent time handling */
-extern void (*mach_gettod)(int *year, int *mon, int *day, int *hour,
-			   int *min, int *sec);
-extern int (*mach_set_clock_mmss)(unsigned long);
-
-/* machine dependent power off functions */
-extern void (*mach_reset)( void );
-extern void (*mach_halt)( void );
-extern void (*mach_power_off)( void );
-
-extern void config_BSP(char *command, int len);
-
-extern void do_IRQ(int irq, struct pt_regs *fp);
-
-#endif /* _M68KNOMMU_MACHDEP_H */
diff --git a/arch/m68knommu/include/asm/math-emu.h b/arch/m68knommu/include/asm/math-emu.h
deleted file mode 100644
index 7e7090517b72..000000000000
--- a/arch/m68knommu/include/asm/math-emu.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/math-emu.h>
diff --git a/arch/m68knommu/include/asm/mc146818rtc.h b/arch/m68knommu/include/asm/mc146818rtc.h
deleted file mode 100644
index 907a0481a140..000000000000
--- a/arch/m68knommu/include/asm/mc146818rtc.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Machine dependent access functions for RTC registers.
- */
-#ifndef _M68KNOMMU_MC146818RTC_H
-#define _M68KNOMMU_MC146818RTC_H
-
-/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */
-
-#endif /* _M68KNOMMU_MC146818RTC_H */
diff --git a/arch/m68knommu/include/asm/mcfcache.h b/arch/m68knommu/include/asm/mcfcache.h
deleted file mode 100644
index c042634fadaa..000000000000
--- a/arch/m68knommu/include/asm/mcfcache.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcfcache.h -- ColdFire CPU cache support code
- *
- *	(C) Copyright 2004, Greg Ungerer <gerg@snapgear.com>
- */
-
-/****************************************************************************/
-#ifndef	__M68KNOMMU_MCFCACHE_H
-#define	__M68KNOMMU_MCFCACHE_H
-/****************************************************************************/
-
-
-/*
- *	The different ColdFire families have different cache arrangments.
- *	Everything from a small instruction only cache, to configurable
- *	data and/or instruction cache, to unified instruction/data, to 
- *	harvard style separate instruction and data caches.
- */
-
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272)
-/*
- *	Simple version 2 core cache. These have instruction cache only,
- *	we just need to invalidate it and enable it.
- */
-.macro CACHE_ENABLE
-	movel	#0x01000000,%d0		/* invalidate cache cmd */
-	movec	%d0,%CACR		/* do invalidate cache */
-	movel	#0x80000100,%d0		/* setup cache mask */
-	movec	%d0,%CACR		/* enable cache */
-.endm
-#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */
-
-#if defined(CONFIG_M523x) || defined(CONFIG_M527x)
-/*
- *	New version 2 cores have a configurable split cache arrangement.
- *	For now I am just enabling instruction cache - but ultimately I
- *	think a split instruction/data cache would be better.
- */
-.macro CACHE_ENABLE
-	movel	#0x01400000,%d0
-	movec	%d0,%CACR		/* invalidate cache */
-	nop
-	movel	#0x0000c000,%d0		/* set SDRAM cached only */
-	movec	%d0,%ACR0
-	movel	#0x00000000,%d0		/* no other regions cached */
-	movec	%d0,%ACR1
-	movel	#0x80400100,%d0		/* configure cache */
-	movec	%d0,%CACR		/* enable cache */
-	nop
-.endm
-#endif /* CONFIG_M523x || CONFIG_M527x */
-
-#if defined(CONFIG_M528x)
-.macro CACHE_ENABLE
-	nop
-	movel	#0x01000000, %d0
-	movec	%d0, %CACR		/* Invalidate cache */
-	nop
-	movel	#0x0000c020, %d0	/* Set SDRAM cached only */
-	movec	%d0, %ACR0
-	movel	#0x00000000, %d0	/* No other regions cached */
-	movec	%d0, %ACR1
-	movel	#0x80000200, %d0	/* Setup cache mask */
-	movec	%d0, %CACR		/* Enable cache */
-	nop
-.endm
-#endif /* CONFIG_M528x */
-
-#if defined(CONFIG_M5249) || defined(CONFIG_M5307)
-/*
- *	The version 3 core cache. Oddly enough the version 2 core 5249
- *	has the same SDRAM and cache setup as the version 3 cores.
- *	This is a single unified instruction/data cache.
- */
-.macro CACHE_ENABLE
-	movel	#0x01000000,%d0		/* invalidate whole cache */
-	movec	%d0,%CACR
-	nop
-#if defined(DEBUGGER_COMPATIBLE_CACHE) || defined(CONFIG_SECUREEDGEMP3)
-	movel	#0x0000c000,%d0		/* set SDRAM cached (write-thru) */
-#else
-	movel	#0x0000c020,%d0		/* set SDRAM cached (copyback) */
-#endif
-	movec	%d0,%ACR0
-	movel	#0x00000000,%d0		/* no other regions cached */
-	movec	%d0,%ACR1
-	movel	#0xa0000200,%d0		/* enable cache */
-	movec	%d0,%CACR
-	nop
-.endm
-#endif /* CONFIG_M5249 || CONFIG_M5307 */
-
-#if defined(CONFIG_M532x)
-.macro CACHE_ENABLE
-	movel	#0x01000000,%d0		/* invalidate cache cmd */
-	movec	%d0,%CACR		/* do invalidate cache */
-	nop
-	movel	#0x4001C000,%d0		/* set SDRAM cached (write-thru) */
-	movec	%d0,%ACR0
-	movel	#0x00000000,%d0		/* no other regions cached */
-	movec	%d0,%ACR1
-	movel	#0x80000200,%d0		/* setup cache mask */
-	movec	%d0,%CACR		/* enable cache */
-	nop
-.endm
-#endif /* CONFIG_M532x */
-
-#if defined(CONFIG_M5407)
-/*
- *	Version 4 cores have a true harvard style separate instruction
- *	and data cache. Invalidate and enable cache, also enable write
- *	buffers and branch accelerator.
- */
-.macro CACHE_ENABLE
-	movel	#0x01040100,%d0		/* invalidate whole cache */
-	movec	%d0,%CACR
-	nop
-	movel	#0x000fc000,%d0		/* set SDRAM cached only */
-	movec	%d0, %ACR0
-	movel	#0x00000000,%d0		/* no other regions cached */
-	movec	%d0, %ACR1
-	movel	#0x000fc000,%d0		/* set SDRAM cached only */
-	movec	%d0, %ACR2
-	movel	#0x00000000,%d0		/* no other regions cached */
-	movec	%d0, %ACR3
-	movel	#0xb6088400,%d0		/* enable caches */
-	movec	%d0,%CACR
-	nop
-.endm
-#endif /* CONFIG_M5407 */
-
-#if defined(CONFIG_M520x)
-.macro CACHE_ENABLE
-	move.l	#0x01000000,%d0		/* invalidate whole cache */
-	movec	%d0,%CACR
-	nop
-	move.l	#0x0000c000,%d0		/* set SDRAM cached (write-thru) */
-	movec	%d0,%ACR0
-	move.l	#0x00000000,%d0		/* no other regions cached */
-	movec	%d0,%ACR1
-	move.l	#0x80400000,%d0		/* enable 8K instruction cache */
-	movec	%d0,%CACR
-	nop
-.endm
-#endif /* CONFIG_M520x */
-
-/****************************************************************************/
-#endif	/* __M68KNOMMU_MCFCACHE_H */
diff --git a/arch/m68knommu/include/asm/mcfdma.h b/arch/m68knommu/include/asm/mcfdma.h
deleted file mode 100644
index 705c52c79cd8..000000000000
--- a/arch/m68knommu/include/asm/mcfdma.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcfdma.h -- Coldfire internal DMA support defines.
- *
- *	(C) Copyright 1999, Rob Scott (rscott@mtrob.ml.org)
- */
-
-/****************************************************************************/
-#ifndef	mcfdma_h
-#define	mcfdma_h
-/****************************************************************************/
-
-
-/*
- *	Get address specific defines for this Coldfire member.
- */
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
-#define	MCFDMA_BASE0		0x200		/* Base address of DMA 0 */
-#define	MCFDMA_BASE1		0x240		/* Base address of DMA 1 */
-#elif defined(CONFIG_M5272)
-#define	MCFDMA_BASE0		0x0e0		/* Base address of DMA 0 */
-#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
-/* These are relative to the IPSBAR, not MBAR */
-#define	MCFDMA_BASE0		0x100		/* Base address of DMA 0 */
-#define	MCFDMA_BASE1		0x140		/* Base address of DMA 1 */
-#define	MCFDMA_BASE2		0x180		/* Base address of DMA 2 */
-#define	MCFDMA_BASE3		0x1C0		/* Base address of DMA 3 */
-#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
-#define	MCFDMA_BASE0		0x300		/* Base address of DMA 0 */
-#define	MCFDMA_BASE1		0x340		/* Base address of DMA 1 */
-#define	MCFDMA_BASE2		0x380		/* Base address of DMA 2 */
-#define	MCFDMA_BASE3		0x3C0		/* Base address of DMA 3 */
-#endif
-
-
-#if !defined(CONFIG_M5272)
-
-/*
- *	Define the DMA register set addresses.
- *      Note: these are longword registers, use unsigned long as data type
- */
-#define	MCFDMA_SAR		0x00		/* DMA source address (r/w) */
-#define	MCFDMA_DAR		0x01		/* DMA destination adr (r/w) */
-/* these are word registers, use unsigned short data type */
-#define	MCFDMA_DCR		0x04		/* DMA control reg (r/w) */
-#define	MCFDMA_BCR		0x06		/* DMA byte count reg (r/w) */
-/* these are byte registers, use unsiged char data type */
-#define	MCFDMA_DSR		0x10		/* DMA status reg (r/w) */
-#define	MCFDMA_DIVR		0x14		/* DMA interrupt vec (r/w) */
-
-/*
- *	Bit definitions for the DMA Control Register (DCR).
- */
-#define	MCFDMA_DCR_INT	        0x8000		/* Enable completion irq */
-#define	MCFDMA_DCR_EEXT	        0x4000		/* Enable external DMA req */
-#define	MCFDMA_DCR_CS 	        0x2000		/* Enable cycle steal */
-#define	MCFDMA_DCR_AA   	0x1000		/* Enable auto alignment */
-#define	MCFDMA_DCR_BWC_MASK  	0x0E00		/* Bandwidth ctl mask */
-#define MCFDMA_DCR_BWC_512      0x0200          /* Bandwidth:   512 Bytes */
-#define MCFDMA_DCR_BWC_1024     0x0400          /* Bandwidth:  1024 Bytes */
-#define MCFDMA_DCR_BWC_2048     0x0600          /* Bandwidth:  2048 Bytes */
-#define MCFDMA_DCR_BWC_4096     0x0800          /* Bandwidth:  4096 Bytes */
-#define MCFDMA_DCR_BWC_8192     0x0a00          /* Bandwidth:  8192 Bytes */
-#define MCFDMA_DCR_BWC_16384    0x0c00          /* Bandwidth: 16384 Bytes */
-#define MCFDMA_DCR_BWC_32768    0x0e00          /* Bandwidth: 32768 Bytes */
-#define	MCFDMA_DCR_SAA         	0x0100		/* Single Address Access */
-#define	MCFDMA_DCR_S_RW        	0x0080		/* SAA read/write value */
-#define	MCFDMA_DCR_SINC        	0x0040		/* Source addr inc enable */
-#define	MCFDMA_DCR_SSIZE_MASK  	0x0030		/* Src xfer size */
-#define	MCFDMA_DCR_SSIZE_LONG  	0x0000		/* Src xfer size, 00 = longw */
-#define	MCFDMA_DCR_SSIZE_BYTE  	0x0010		/* Src xfer size, 01 = byte */
-#define	MCFDMA_DCR_SSIZE_WORD  	0x0020		/* Src xfer size, 10 = word */
-#define	MCFDMA_DCR_SSIZE_LINE  	0x0030		/* Src xfer size, 11 = line */
-#define	MCFDMA_DCR_DINC        	0x0008		/* Dest addr inc enable */
-#define	MCFDMA_DCR_DSIZE_MASK  	0x0006		/* Dest xfer size */
-#define	MCFDMA_DCR_DSIZE_LONG  	0x0000		/* Dest xfer size, 00 = long */
-#define	MCFDMA_DCR_DSIZE_BYTE  	0x0002		/* Dest xfer size, 01 = byte */
-#define	MCFDMA_DCR_DSIZE_WORD  	0x0004		/* Dest xfer size, 10 = word */
-#define	MCFDMA_DCR_DSIZE_LINE  	0x0006		/* Dest xfer size, 11 = line */
-#define	MCFDMA_DCR_START       	0x0001		/* Start transfer */
-
-/*
- *	Bit definitions for the DMA Status Register (DSR).
- */
-#define	MCFDMA_DSR_CE	        0x40		/* Config error */
-#define	MCFDMA_DSR_BES	        0x20		/* Bus Error on source */
-#define	MCFDMA_DSR_BED 	        0x10		/* Bus Error on dest */
-#define	MCFDMA_DSR_REQ   	0x04		/* Requests remaining */
-#define	MCFDMA_DSR_BSY  	0x02		/* Busy */
-#define	MCFDMA_DSR_DONE        	0x01		/* DMA transfer complete */
-
-#else /* This is an MCF5272 */
-
-#define MCFDMA_DMR        0x00    /* Mode Register (r/w) */
-#define MCFDMA_DIR        0x03    /* Interrupt trigger register (r/w) */
-#define MCFDMA_DSAR       0x03    /* Source Address register (r/w) */
-#define MCFDMA_DDAR       0x04    /* Destination Address register (r/w) */
-#define MCFDMA_DBCR       0x02    /* Byte Count Register (r/w) */
-
-/* Bit definitions for the DMA Mode Register (DMR) */
-#define MCFDMA_DMR_RESET     0x80000000L /* Reset bit */
-#define MCFDMA_DMR_EN        0x40000000L /* DMA enable */
-#define MCFDMA_DMR_RQM       0x000C0000L /* Request Mode Mask */
-#define MCFDMA_DMR_RQM_DUAL  0x000C0000L /* Dual address mode, the only valid mode */
-#define MCFDMA_DMR_DSTM      0x00002000L /* Destination addressing mask */
-#define MCFDMA_DMR_DSTM_SA   0x00000000L /* Destination uses static addressing */
-#define MCFDMA_DMR_DSTM_IA   0x00002000L /* Destination uses incremental addressing */
-#define MCFDMA_DMR_DSTT_UD   0x00000400L /* Destination is user data */
-#define MCFDMA_DMR_DSTT_UC   0x00000800L /* Destination is user code */
-#define MCFDMA_DMR_DSTT_SD   0x00001400L /* Destination is supervisor data */
-#define MCFDMA_DMR_DSTT_SC   0x00001800L /* Destination is supervisor code */
-#define MCFDMA_DMR_DSTS_OFF  0x8         /* offset to the destination size bits */
-#define MCFDMA_DMR_DSTS_LONG 0x00000000L /* Long destination size */
-#define MCFDMA_DMR_DSTS_BYTE 0x00000100L /* Byte destination size */
-#define MCFDMA_DMR_DSTS_WORD 0x00000200L /* Word destination size */
-#define MCFDMA_DMR_DSTS_LINE 0x00000300L /* Line destination size */
-#define MCFDMA_DMR_SRCM      0x00000020L /* Source addressing mask */
-#define MCFDMA_DMR_SRCM_SA   0x00000000L /* Source uses static addressing */
-#define MCFDMA_DMR_SRCM_IA   0x00000020L /* Source uses incremental addressing */
-#define MCFDMA_DMR_SRCT_UD   0x00000004L /* Source is user data */
-#define MCFDMA_DMR_SRCT_UC   0x00000008L /* Source is user code */
-#define MCFDMA_DMR_SRCT_SD   0x00000014L /* Source is supervisor data */
-#define MCFDMA_DMR_SRCT_SC   0x00000018L /* Source is supervisor code */
-#define MCFDMA_DMR_SRCS_OFF  0x0         /* Offset to the source size bits */
-#define MCFDMA_DMR_SRCS_LONG 0x00000000L /* Long source size */
-#define MCFDMA_DMR_SRCS_BYTE 0x00000001L /* Byte source size */
-#define MCFDMA_DMR_SRCS_WORD 0x00000002L /* Word source size */
-#define MCFDMA_DMR_SRCS_LINE 0x00000003L /* Line source size */
-
-/* Bit definitions for the DMA interrupt register (DIR) */
-#define MCFDMA_DIR_INVEN     0x1000 /* Invalid Combination interrupt enable */
-#define MCFDMA_DIR_ASCEN     0x0800 /* Address Sequence Complete (Completion) interrupt enable */
-#define MCFDMA_DIR_TEEN      0x0200 /* Transfer Error interrupt enable */
-#define MCFDMA_DIR_TCEN      0x0100 /* Transfer Complete (a bus transfer, that is) interrupt enable */
-#define MCFDMA_DIR_INV       0x0010 /* Invalid Combination */
-#define MCFDMA_DIR_ASC       0x0008 /* Address Sequence Complete (DMA Completion) */
-#define MCFDMA_DIR_TE        0x0002 /* Transfer Error */
-#define MCFDMA_DIR_TC        0x0001 /* Transfer Complete */
-
-#endif /* !defined(CONFIG_M5272) */ 
-
-/****************************************************************************/
-#endif	/* mcfdma_h */
diff --git a/arch/m68knommu/include/asm/mcfmbus.h b/arch/m68knommu/include/asm/mcfmbus.h
deleted file mode 100644
index 319899c47a2c..000000000000
--- a/arch/m68knommu/include/asm/mcfmbus.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/****************************************************************************/
-
-/*
- *      mcfmbus.h -- Coldfire MBUS support defines.
- *
- *      (C) Copyright 1999, Martin Floeer (mfloeer@axcent.de) 
- */
-
-/****************************************************************************/
-
-
-#ifndef mcfmbus_h
-#define mcfmbus_h
-
-
-#define MCFMBUS_BASE		0x280
-#define MCFMBUS_IRQ_VECTOR	0x19
-#define MCFMBUS_IRQ		0x1
-#define MCFMBUS_CLK		0x3f
-#define MCFMBUS_IRQ_LEVEL	0x07	/*IRQ Level 1*/
-#define MCFMBUS_ADDRESS		0x01
-
-
-/*
-*	Define the 5307 MBUS register set addresses
-*/
-
-#define MCFMBUS_MADR	0x00
-#define MCFMBUS_MFDR	0x04
-#define MCFMBUS_MBCR	0x08
-#define MCFMBUS_MBSR	0x0C
-#define MCFMBUS_MBDR	0x10
-
-
-#define MCFMBUS_MADR_ADDR(a)	(((a)&0x7F)<<0x01) /*Slave Address*/
-
-#define MCFMBUS_MFDR_MBC(a)	((a)&0x3F)	   /*M-Bus Clock*/
-
-/*
-*	Define bit flags in Control Register
-*/
-
-#define MCFMBUS_MBCR_MEN           (0x80)  /* M-Bus Enable                 */
-#define MCFMBUS_MBCR_MIEN          (0x40)  /* M-Bus Interrupt Enable       */
-#define MCFMBUS_MBCR_MSTA          (0x20)  /* Master/Slave Mode Select Bit */
-#define MCFMBUS_MBCR_MTX           (0x10)  /* Transmit/Rcv Mode Select Bit */
-#define MCFMBUS_MBCR_TXAK          (0x08)  /* Transmit Acknowledge Enable  */
-#define MCFMBUS_MBCR_RSTA          (0x04)  /* Repeat Start                 */
-
-/*
-*	Define bit flags in Status Register
-*/
-
-#define MCFMBUS_MBSR_MCF           (0x80)  /* Data Transfer Complete       */
-#define MCFMBUS_MBSR_MAAS          (0x40)  /* Addressed as a Slave         */
-#define MCFMBUS_MBSR_MBB           (0x20)  /* Bus Busy                     */
-#define MCFMBUS_MBSR_MAL           (0x10)  /* Arbitration Lost             */
-#define MCFMBUS_MBSR_SRW           (0x04)  /* Slave Transmit               */
-#define MCFMBUS_MBSR_MIF           (0x02)  /* M-Bus Interrupt              */
-#define MCFMBUS_MBSR_RXAK          (0x01)  /* No Acknowledge Received      */
-
-/*
-*	Define bit flags in DATA I/O Register
-*/
-
-#define MCFMBUS_MBDR_READ          (0x01)  /* 1=read 0=write MBUS */
-
-#define MBUSIOCSCLOCK		1
-#define MBUSIOCGCLOCK		2
-#define MBUSIOCSADDR			3
-#define MBUSIOCGADDR			4
-#define MBUSIOCSSLADDR			5
-#define MBUSIOCGSLADDR			6
-#define MBUSIOCSSUBADDR			7
-#define MBUSIOCGSUBADDR			8
-
-#endif
diff --git a/arch/m68knommu/include/asm/mcfne.h b/arch/m68knommu/include/asm/mcfne.h
deleted file mode 100644
index 431f63aadd0e..000000000000
--- a/arch/m68knommu/include/asm/mcfne.h
+++ /dev/null
@@ -1,325 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcfne.h -- NE2000 in ColdFire eval boards.
- *
- *	(C) Copyright 1999-2000, Greg Ungerer (gerg@snapgear.com)
- *	(C) Copyright 2000,      Lineo (www.lineo.com)
- *	(C) Copyright 2001,      SnapGear (www.snapgear.com)
- *
- *      19990409 David W. Miller  Converted from m5206ne.h for 5307 eval board
- *
- *      Hacked support for m5206e Cadre III evaluation board
- *      Fred Stevens (fred.stevens@pemstar.com) 13 April 1999
- */
-
-/****************************************************************************/
-#ifndef	mcfne_h
-#define	mcfne_h
-/****************************************************************************/
-
-
-/*
- *	Support for NE2000 clones devices in ColdFire based boards.
- *	Not all boards address these parts the same way, some use a
- *	direct addressing method, others use a side-band address space
- *	to access odd address registers, some require byte swapping
- *	others do not.
- */
-#define	BSWAP(w)	(((w) << 8) | ((w) >> 8))
-#define	RSWAP(w)	(w)
-
-
-/*
- *	Define the basic hardware resources of NE2000 boards.
- */
-
-#if defined(CONFIG_ARN5206)
-#define NE2000_ADDR		0x40000300
-#define NE2000_ODDOFFSET	0x00010000
-#define	NE2000_IRQ_VECTOR	0xf0
-#define	NE2000_IRQ_PRIORITY	2
-#define	NE2000_IRQ_LEVEL	4
-#define	NE2000_BYTE		volatile unsigned short
-#endif
-
-#if defined(CONFIG_M5206eC3)
-#define	NE2000_ADDR		0x40000300
-#define	NE2000_ODDOFFSET	0x00010000
-#define	NE2000_IRQ_VECTOR	0x1c
-#define	NE2000_IRQ_PRIORITY	2
-#define	NE2000_IRQ_LEVEL	4
-#define	NE2000_BYTE		volatile unsigned short
-#endif
-
-#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
-#define NE2000_ADDR		0x30000300
-#define NE2000_IRQ_VECTOR	25
-#define NE2000_IRQ_PRIORITY	1
-#define NE2000_IRQ_LEVEL	3
-#define	NE2000_BYTE		volatile unsigned char
-#endif
-
-#if defined(CONFIG_M5307C3)
-#define NE2000_ADDR		0x40000300
-#define NE2000_ODDOFFSET	0x00010000
-#define NE2000_IRQ_VECTOR	0x1b
-#define	NE2000_BYTE		volatile unsigned short
-#endif
-
-#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
-#define NE2000_ADDR		0x30600300
-#define NE2000_ODDOFFSET	0x00008000
-#define NE2000_IRQ_VECTOR	67
-#undef	BSWAP
-#define	BSWAP(w)		(w)
-#define	NE2000_BYTE		volatile unsigned short
-#undef	RSWAP
-#define	RSWAP(w)		(((w) << 8) | ((w) >> 8))
-#endif
-
-#if defined(CONFIG_M5307) && defined(CONFIG_NETtel)
-#define NE2000_ADDR0		0x30600300
-#define NE2000_ADDR1		0x30800300
-#define NE2000_ODDOFFSET	0x00008000
-#define NE2000_IRQ_VECTOR0	27
-#define NE2000_IRQ_VECTOR1	29
-#undef	BSWAP
-#define	BSWAP(w)		(w)
-#define	NE2000_BYTE		volatile unsigned short
-#undef	RSWAP
-#define	RSWAP(w)		(((w) << 8) | ((w) >> 8))
-#endif
-
-#if defined(CONFIG_M5307) && defined(CONFIG_SECUREEDGEMP3)
-#define NE2000_ADDR		0x30600300
-#define NE2000_ODDOFFSET	0x00008000
-#define NE2000_IRQ_VECTOR	27
-#undef	BSWAP
-#define	BSWAP(w)		(w)
-#define	NE2000_BYTE		volatile unsigned short
-#undef	RSWAP
-#define	RSWAP(w)		(((w) << 8) | ((w) >> 8))
-#endif
-
-#if defined(CONFIG_ARN5307)
-#define NE2000_ADDR		0xfe600300
-#define NE2000_ODDOFFSET	0x00010000
-#define NE2000_IRQ_VECTOR	0x1b
-#define NE2000_IRQ_PRIORITY	2
-#define NE2000_IRQ_LEVEL	3
-#define	NE2000_BYTE		volatile unsigned short
-#endif
-
-#if defined(CONFIG_M5407C3)
-#define NE2000_ADDR		0x40000300
-#define NE2000_ODDOFFSET	0x00010000
-#define NE2000_IRQ_VECTOR	0x1b
-#define	NE2000_BYTE		volatile unsigned short
-#endif
-
-/****************************************************************************/
-
-/*
- *	Side-band address space for odd address requires re-mapping
- *	many of the standard ISA access functions.
- */
-#ifdef NE2000_ODDOFFSET
-
-#undef outb
-#undef outb_p
-#undef inb
-#undef inb_p
-#undef outsb
-#undef outsw
-#undef insb
-#undef insw
-
-#define	outb	ne2000_outb
-#define	inb	ne2000_inb
-#define	outb_p	ne2000_outb
-#define	inb_p	ne2000_inb
-#define	outsb	ne2000_outsb
-#define	outsw	ne2000_outsw
-#define	insb	ne2000_insb
-#define	insw	ne2000_insw
-
-
-#ifndef COLDFIRE_NE2000_FUNCS
-
-void ne2000_outb(unsigned int val, unsigned int addr);
-int  ne2000_inb(unsigned int addr);
-void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len);
-void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len);
-void ne2000_outsb(unsigned int addr, void *vbuf, unsigned long len);
-void ne2000_outsw(unsigned int addr, void *vbuf, unsigned long len);
-
-#else
-
-/*
- *	This macro converts a conventional register address into the
- *	real memory pointer of the mapped NE2000 device.
- *	On most NE2000 implementations on ColdFire boards the chip is
- *	mapped in kinda funny, due to its ISA heritage.
- */
-#define	NE2000_PTR(addr)	((addr&0x1)?(NE2000_ODDOFFSET+addr-1):(addr))
-#define	NE2000_DATA_PTR(addr)	(addr)
-
-
-void ne2000_outb(unsigned int val, unsigned int addr)
-{
-	NE2000_BYTE	*rp;
-
-	rp = (NE2000_BYTE *) NE2000_PTR(addr);
-	*rp = RSWAP(val);
-}
-
-int ne2000_inb(unsigned int addr)
-{
-	NE2000_BYTE	*rp, val;
-
-	rp = (NE2000_BYTE *) NE2000_PTR(addr);
-	val = *rp;
-	return((int) ((NE2000_BYTE) RSWAP(val)));
-}
-
-void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len)
-{
-	NE2000_BYTE	*rp, val;
-	unsigned char	*buf;
-
-	buf = (unsigned char *) vbuf;
-	rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
-	for (; (len > 0); len--) {
-		val = *rp;
-		*buf++ = RSWAP(val);
-	}
-}
-
-void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len)
-{
-	volatile unsigned short	*rp;
-	unsigned short		w, *buf;
-
-	buf = (unsigned short *) vbuf;
-	rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
-	for (; (len > 0); len--) {
-		w = *rp;
-		*buf++ = BSWAP(w);
-	}
-}
-
-void ne2000_outsb(unsigned int addr, const void *vbuf, unsigned long len)
-{
-	NE2000_BYTE	*rp, val;
-	unsigned char	*buf;
-
-	buf = (unsigned char *) vbuf;
-	rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
-	for (; (len > 0); len--) {
-		val = *buf++;
-		*rp = RSWAP(val);
-	}
-}
-
-void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len)
-{
-	volatile unsigned short	*rp;
-	unsigned short		w, *buf;
-
-	buf = (unsigned short *) vbuf;
-	rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
-	for (; (len > 0); len--) {
-		w = *buf++;
-		*rp = BSWAP(w);
-	}
-}
-
-#endif /* COLDFIRE_NE2000_FUNCS */
-#endif /* NE2000_OFFOFFSET */
-
-/****************************************************************************/
-
-#ifdef COLDFIRE_NE2000_FUNCS
-
-/*
- *	Lastly the interrupt set up code...
- *	Minor differences between the different board types.
- */
-
-#if defined(CONFIG_ARN5206)
-void ne2000_irqsetup(int irq)
-{
-	volatile unsigned char  *icrp;
-
-	icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
-	*icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2;
-	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
-}
-#endif
-
-#if defined(CONFIG_M5206eC3)
-void ne2000_irqsetup(int irq)
-{
-	volatile unsigned char  *icrp;
-
-	icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
-	*icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2 | MCFSIM_ICR_AUTOVEC;
-	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
-}
-#endif
-
-#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
-void ne2000_irqsetup(int irq)
-{
-	mcf_autovector(irq);
-}
-#endif
-
-#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
-void ne2000_irqsetup(int irq)
-{
-	volatile unsigned long	*icrp;
-	volatile unsigned long	*pitr;
-
-	/* The NE2000 device uses external IRQ3 */
-	icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
-	*icrp = (*icrp & 0x77077777) | 0x00d00000;
-
-	pitr = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PITR);
-	*pitr = *pitr | 0x20000000;
-}
-
-void ne2000_irqack(int irq)
-{
-	volatile unsigned long	*icrp;
-
-	/* The NE2000 device uses external IRQ3 */
-	icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
-	*icrp = (*icrp & 0x77777777) | 0x00800000;
-}
-#endif
-
-#if defined(CONFIG_M5307) || defined(CONFIG_M5407)
-#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
-
-void ne2000_irqsetup(int irq)
-{
-	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
-	mcf_autovector(irq);
-}
-
-#else
-
-void ne2000_irqsetup(int irq)
-{
-	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
-}
-
-#endif /* ! CONFIG_NETtel || CONFIG_SECUREEDGEMP3 */
-#endif /* CONFIG_M5307 || CONFIG_M5407 */
-
-#endif /* COLDFIRE_NE2000_FUNCS */
-
-/****************************************************************************/
-#endif	/* mcfne_h */
diff --git a/arch/m68knommu/include/asm/mcfpci.h b/arch/m68knommu/include/asm/mcfpci.h
deleted file mode 100644
index f1507dd06ec6..000000000000
--- a/arch/m68knommu/include/asm/mcfpci.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcfpci.h -- PCI bridge on ColdFire eval boards.
- *
- *	(C) Copyright 2000, Greg Ungerer (gerg@snapgear.com)
- *	(C) Copyright 2000, Lineo Inc. (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef	mcfpci_h
-#define	mcfpci_h
-/****************************************************************************/
-
-
-#ifdef CONFIG_PCI
-
-/*
- *	Address regions in the PCI address space are not mapped into the
- *	normal memory space of the ColdFire. They must be accessed via
- *	handler routines. This is easy for I/O space (inb/outb/etc) but
- *	needs some code changes to support ordinary memory. Interrupts
- *	also need to be vectored through the PCI handler first, then it
- *	will call the actual driver sub-handlers.
- */
-
-/*
- *	Un-define all the standard I/O access routines.
- */
-#undef	inb
-#undef	inw
-#undef	inl
-#undef	inb_p
-#undef	inw_p
-#undef	insb
-#undef	insw
-#undef	insl
-#undef	outb
-#undef	outw
-#undef	outl
-#undef	outb_p
-#undef	outw_p
-#undef	outsb
-#undef	outsw
-#undef	outsl
-
-#undef	request_irq
-#undef	free_irq
-
-#undef	bus_to_virt
-#undef	virt_to_bus
-
-
-/*
- *	Re-direct all I/O memory accesses functions to PCI specific ones.
- */
-#define	inb	pci_inb
-#define	inw	pci_inw
-#define	inl	pci_inl
-#define	inb_p	pci_inb
-#define	inw_p	pci_inw
-#define	insb	pci_insb
-#define	insw	pci_insw
-#define	insl	pci_insl
-
-#define	outb	pci_outb
-#define	outw	pci_outw
-#define	outl	pci_outl
-#define	outb_p	pci_outb
-#define	outw_p	pci_outw
-#define	outsb	pci_outsb
-#define	outsw	pci_outsw
-#define	outsl	pci_outsl
-
-#define	request_irq	pci_request_irq
-#define	free_irq	pci_free_irq
-
-#define	virt_to_bus	pci_virt_to_bus
-#define	bus_to_virt	pci_bus_to_virt
-
-#define	CONFIG_COMEMPCI	1
-
-
-/*
- *	Prototypes of the real PCI functions (defined in bios32.c).
- */
-unsigned char	pci_inb(unsigned int addr);
-unsigned short	pci_inw(unsigned int addr);
-unsigned int	pci_inl(unsigned int addr);
-void		pci_insb(void *addr, void *buf, int len);
-void		pci_insw(void *addr, void *buf, int len);
-void		pci_insl(void *addr, void *buf, int len);
-
-void		pci_outb(unsigned char val, unsigned int addr);
-void		pci_outw(unsigned short val, unsigned int addr);
-void		pci_outl(unsigned int val, unsigned int addr);
-void		pci_outsb(void *addr, void *buf, int len);
-void		pci_outsw(void *addr, void *buf, int len);
-void		pci_outsl(void *addr, void *buf, int len);
-
-int		pci_request_irq(unsigned int irq,
-			void (*handler)(int, void *, struct pt_regs *),
-			unsigned long flags,
-			const char *device,
-			void *dev_id);
-void		pci_free_irq(unsigned int irq, void *dev_id);
-
-void		*pci_bmalloc(int size);
-void		pci_bmfree(void *bmp, int len);
-void		pci_copytoshmem(unsigned long bmp, void *src, int size);
-void		pci_copyfromshmem(void *dst, unsigned long bmp, int size);
-unsigned long	pci_virt_to_bus(volatile void *address);
-void		*pci_bus_to_virt(unsigned long address);
-void		pci_bmcpyto(void *dst, void *src, int len);
-void		pci_bmcpyfrom(void *dst, void *src, int len);
-
-#endif /* CONFIG_PCI */
-/****************************************************************************/
-#endif	/* mcfpci_h */
diff --git a/arch/m68knommu/include/asm/mcfpit.h b/arch/m68knommu/include/asm/mcfpit.h
deleted file mode 100644
index f570cf64fd29..000000000000
--- a/arch/m68knommu/include/asm/mcfpit.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcfpit.h -- ColdFire internal PIT timer support defines.
- *
- *	(C) Copyright 2003, Greg Ungerer (gerg@snapgear.com)
- */
-
-/****************************************************************************/
-#ifndef	mcfpit_h
-#define	mcfpit_h
-/****************************************************************************/
-
-
-/*
- *	Get address specific defines for the 5270/5271, 5280/5282, and 5208.
- */
-#if defined(CONFIG_M520x)
-#define	MCFPIT_BASE1		0x00080000	/* Base address of TIMER1 */
-#define	MCFPIT_BASE2		0x00084000	/* Base address of TIMER2 */
-#else
-#define	MCFPIT_BASE1		0x00150000	/* Base address of TIMER1 */
-#define	MCFPIT_BASE2		0x00160000	/* Base address of TIMER2 */
-#define	MCFPIT_BASE3		0x00170000	/* Base address of TIMER3 */
-#define	MCFPIT_BASE4		0x00180000	/* Base address of TIMER4 */
-#endif
-
-/*
- *	Define the PIT timer register set addresses.
- */
-#define	MCFPIT_PCSR		0x0		/* PIT control register */
-#define	MCFPIT_PMR		0x2		/* PIT modulus register */
-#define	MCFPIT_PCNTR		0x4		/* PIT count register */
-
-/*
- *	Bit definitions for the PIT Control and Status register.
- */
-#define	MCFPIT_PCSR_CLK1	0x0000		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK2	0x0100		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK4	0x0200		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK8	0x0300		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK16	0x0400		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK32	0x0500		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK64	0x0600		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK128	0x0700		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK256	0x0800		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK512	0x0900		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK1024	0x0a00		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK2048	0x0b00		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK4096	0x0c00		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK8192	0x0d00		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK16384	0x0e00		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK32768	0x0f00		/* System clock divisor */
-#define	MCFPIT_PCSR_DOZE	0x0040		/* Clock run in doze mode */
-#define	MCFPIT_PCSR_HALTED	0x0020		/* Clock run in halt mode */
-#define	MCFPIT_PCSR_OVW		0x0010		/* Overwrite PIT counter now */
-#define	MCFPIT_PCSR_PIE		0x0008		/* Enable PIT interrupt */
-#define	MCFPIT_PCSR_PIF		0x0004		/* PIT interrupt flag */
-#define	MCFPIT_PCSR_RLD		0x0002		/* Reload counter */
-#define	MCFPIT_PCSR_EN		0x0001		/* Enable PIT */
-#define	MCFPIT_PCSR_DISABLE	0x0000		/* Disable PIT */
-
-/****************************************************************************/
-#endif	/* mcfpit_h */
diff --git a/arch/m68knommu/include/asm/mcfsim.h b/arch/m68knommu/include/asm/mcfsim.h
deleted file mode 100644
index da3f2ceff3a4..000000000000
--- a/arch/m68knommu/include/asm/mcfsim.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcfsim.h -- ColdFire System Integration Module support.
- *
- *	(C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
- * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
- */
-
-/****************************************************************************/
-#ifndef	mcfsim_h
-#define	mcfsim_h
-/****************************************************************************/
-
-
-/*
- *	Include 5204, 5206/e, 5235, 5249, 5270/5271, 5272, 5280/5282,
- *	5307 or 5407 specific addresses.
- */
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
-#include <asm/m5206sim.h>
-#elif defined(CONFIG_M520x)
-#include <asm/m520xsim.h>
-#elif defined(CONFIG_M523x)
-#include <asm/m523xsim.h>
-#elif defined(CONFIG_M5249)
-#include <asm/m5249sim.h>
-#elif defined(CONFIG_M527x)
-#include <asm/m527xsim.h>
-#elif defined(CONFIG_M5272)
-#include <asm/m5272sim.h>
-#elif defined(CONFIG_M528x)
-#include <asm/m528xsim.h>
-#elif defined(CONFIG_M5307)
-#include <asm/m5307sim.h>
-#elif defined(CONFIG_M532x)
-#include <asm/m532xsim.h>
-#elif defined(CONFIG_M5407)
-#include <asm/m5407sim.h>
-#endif
-
-
-/*
- *	Define the base address of the SIM within the MBAR address space.
- */
-#define	MCFSIM_BASE		0x0		/* Base address of SIM */
-
-
-/*
- *	Bit definitions for the ICR family of registers.
- */
-#define	MCFSIM_ICR_AUTOVEC	0x80		/* Auto-vectored intr */
-#define	MCFSIM_ICR_LEVEL0	0x00		/* Level 0 intr */
-#define	MCFSIM_ICR_LEVEL1	0x04		/* Level 1 intr */
-#define	MCFSIM_ICR_LEVEL2	0x08		/* Level 2 intr */
-#define	MCFSIM_ICR_LEVEL3	0x0c		/* Level 3 intr */
-#define	MCFSIM_ICR_LEVEL4	0x10		/* Level 4 intr */
-#define	MCFSIM_ICR_LEVEL5	0x14		/* Level 5 intr */
-#define	MCFSIM_ICR_LEVEL6	0x18		/* Level 6 intr */
-#define	MCFSIM_ICR_LEVEL7	0x1c		/* Level 7 intr */
-
-#define	MCFSIM_ICR_PRI0		0x00		/* Priority 0 intr */
-#define	MCFSIM_ICR_PRI1		0x01		/* Priority 1 intr */
-#define	MCFSIM_ICR_PRI2		0x02		/* Priority 2 intr */
-#define	MCFSIM_ICR_PRI3		0x03		/* Priority 3 intr */
-
-/*
- *	Bit definitions for the Interrupt Mask register (IMR).
- */
-#define	MCFSIM_IMR_EINT1	0x0002		/* External intr # 1 */
-#define	MCFSIM_IMR_EINT2	0x0004		/* External intr # 2 */
-#define	MCFSIM_IMR_EINT3	0x0008		/* External intr # 3 */
-#define	MCFSIM_IMR_EINT4	0x0010		/* External intr # 4 */
-#define	MCFSIM_IMR_EINT5	0x0020		/* External intr # 5 */
-#define	MCFSIM_IMR_EINT6	0x0040		/* External intr # 6 */
-#define	MCFSIM_IMR_EINT7	0x0080		/* External intr # 7 */
-
-#define	MCFSIM_IMR_SWD		0x0100		/* Software Watchdog intr */
-#define	MCFSIM_IMR_TIMER1	0x0200		/* TIMER 1 intr */
-#define	MCFSIM_IMR_TIMER2	0x0400		/* TIMER 2 intr */
-#define MCFSIM_IMR_MBUS		0x0800		/* MBUS intr	*/
-#define	MCFSIM_IMR_UART1	0x1000		/* UART 1 intr */
-#define	MCFSIM_IMR_UART2	0x2000		/* UART 2 intr */
-
-#if defined(CONFIG_M5206e)
-#define	MCFSIM_IMR_DMA1		0x4000		/* DMA 1 intr */
-#define	MCFSIM_IMR_DMA2		0x8000		/* DMA 2 intr */
-#elif defined(CONFIG_M5249) || defined(CONFIG_M5307)
-#define	MCFSIM_IMR_DMA0		0x4000		/* DMA 0 intr */
-#define	MCFSIM_IMR_DMA1		0x8000		/* DMA 1 intr */
-#define	MCFSIM_IMR_DMA2		0x10000		/* DMA 2 intr */
-#define	MCFSIM_IMR_DMA3		0x20000		/* DMA 3 intr */
-#endif
-
-/*
- *	Mask for all of the SIM devices. Some parts have more or less
- *	SIM devices. This is a catchall for the sandard set.
- */
-#ifndef MCFSIM_IMR_MASKALL
-#define	MCFSIM_IMR_MASKALL	0x3ffe		/* All intr sources */
-#endif
-
-
-/*
- *	PIT interrupt settings, if not found in mXXXXsim.h file.
- */
-#ifndef	ICR_INTRCONF
-#define	ICR_INTRCONF		0x2b            /* PIT1 level 5, priority 3 */
-#endif
-#ifndef	MCFPIT_IMR
-#define	MCFPIT_IMR		MCFINTC_IMRH
-#endif
-#ifndef	MCFPIT_IMR_IBIT
-#define	MCFPIT_IMR_IBIT		(1 << (MCFINT_PIT1 - 32))
-#endif
-
-
-#ifndef __ASSEMBLY__
-/*
- *	Definition for the interrupt auto-vectoring support.
- */
-extern void	mcf_autovector(unsigned int vec);
-#endif /* __ASSEMBLY__ */
-
-/****************************************************************************/
-#endif	/* mcfsim_h */
diff --git a/arch/m68knommu/include/asm/mcfsmc.h b/arch/m68knommu/include/asm/mcfsmc.h
deleted file mode 100644
index 2d7a4dbd9683..000000000000
--- a/arch/m68knommu/include/asm/mcfsmc.h
+++ /dev/null
@@ -1,187 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcfsmc.h -- SMC ethernet support for ColdFire environments.
- *
- *	(C) Copyright 1999-2002, Greg Ungerer (gerg@snapgear.com)
- *	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
- */
-
-/****************************************************************************/
-#ifndef	mcfsmc_h
-#define	mcfsmc_h
-/****************************************************************************/
-
-/*
- *	None of the current ColdFire targets that use the SMC91x111
- *	allow 8 bit accesses. So this code is 16bit access only.
- */
-
-
-#undef	outb
-#undef	inb
-#undef	outw
-#undef	outwd
-#undef	inw	
-#undef	outl
-#undef	inl
-
-#undef	outsb
-#undef	outsw
-#undef	outsl
-#undef	insb
-#undef	insw
-#undef	insl
-
-/*
- *	Re-defines for ColdFire environment... The SMC part is
- *	mapped into memory space, so remap the PC-style in/out
- *	routines to handle that.
- */
-#define	outb	smc_outb
-#define	inb	smc_inb
-#define	outw	smc_outw
-#define	outwd	smc_outwd
-#define	inw	smc_inw
-#define	outl	smc_outl
-#define	inl	smc_inl
-
-#define	outsb	smc_outsb
-#define	outsw	smc_outsw
-#define	outsl	smc_outsl
-#define	insb	smc_insb
-#define	insw	smc_insw
-#define	insl	smc_insl
-
-
-static inline int smc_inb(unsigned int addr)
-{
-	register unsigned short	w;
-	w = *((volatile unsigned short *) (addr & ~0x1));
-	return(((addr & 0x1) ? w : (w >> 8)) & 0xff);
-}
-
-static inline void smc_outw(unsigned int val, unsigned int addr)
-{
-	*((volatile unsigned short *) addr) = (val << 8) | (val >> 8);
-}
-
-static inline int smc_inw(unsigned int addr)
-{
-	register unsigned short	w;
-	w = *((volatile unsigned short *) addr);
-	return(((w << 8) | (w >> 8)) & 0xffff);
-}
-
-static inline void smc_outl(unsigned long val, unsigned int addr)
-{
-	*((volatile unsigned long *) addr) = 
-		((val << 8) & 0xff000000) | ((val >> 8) & 0x00ff0000) |
-		((val << 8) & 0x0000ff00) | ((val >> 8) & 0x000000ff);
-}
-
-static inline void smc_outwd(unsigned int val, unsigned int addr)
-{
-	*((volatile unsigned short *) addr) = val;
-}
-
-
-/*
- *	The rep* functions are used to feed the data port with
- *	raw data. So we do not byte swap them when copying.
- */
-
-static inline void smc_insb(unsigned int addr, void *vbuf, int unsigned long len)
-{
-	volatile unsigned short	*rp;
-	unsigned short		*buf, *ebuf;
-
-	buf = (unsigned short *) vbuf;
-	rp = (volatile unsigned short *) addr;
-
-	/* Copy as words for as long as possible */
-	for (ebuf = buf + (len >> 1); (buf < ebuf); )
-		*buf++ = *rp;
-
-	/* Lastly, handle left over byte */
-	if (len & 0x1)
-		*((unsigned char *) buf) = (*rp >> 8) & 0xff;
-}
-
-static inline void smc_insw(unsigned int addr, void *vbuf, unsigned long len)
-{
-	volatile unsigned short	*rp;
-	unsigned short		*buf, *ebuf;
-
-	buf = (unsigned short *) vbuf;
-	rp = (volatile unsigned short *) addr;
-	for (ebuf = buf + len; (buf < ebuf); )
-		*buf++ = *rp;
-}
-
-static inline void smc_insl(unsigned int addr, void *vbuf, unsigned long len)
-{
-	volatile unsigned long	*rp;
-	unsigned long		*buf, *ebuf;
-
-	buf = (unsigned long *) vbuf;
-	rp = (volatile unsigned long *) addr;
-	for (ebuf = buf + len; (buf < ebuf); )
-		*buf++ = *rp;
-}
-
-static inline void smc_outsw(unsigned int addr, const void *vbuf, unsigned long len)
-{
-	volatile unsigned short	*rp;
-	unsigned short		*buf, *ebuf;
-
-	buf = (unsigned short *) vbuf;
-	rp = (volatile unsigned short *) addr;
-	for (ebuf = buf + len; (buf < ebuf); )
-		*rp = *buf++;
-}
-
-static inline void smc_outsl(unsigned int addr, void *vbuf, unsigned long len)
-{
-	volatile unsigned long	*rp;
-	unsigned long		*buf, *ebuf;
-
-	buf = (unsigned long *) vbuf;
-	rp = (volatile unsigned long *) addr;
-	for (ebuf = buf + len; (buf < ebuf); )
-		*rp = *buf++;
-}
-
-
-#ifdef CONFIG_NETtel
-/*
- *	Re-map the address space of at least one of the SMC ethernet
- *	parts. Both parts power up decoding the same address, so we
- *	need to move one of them first, before doing enything else.
- *
- *	We also increase the number of wait states for this part by one.
- */
-
-void smc_remap(unsigned int ioaddr)
-{
-	static int		once = 0;
-	extern unsigned short	ppdata;
-	if (once++ == 0) {
-		*((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADDR)) = 0x00ec;
-		ppdata |= 0x0080;
-		*((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata;
-		outw(0x0001, ioaddr + BANK_SELECT);
-		outw(0x0001, ioaddr + BANK_SELECT);
-		outw(0x0067, ioaddr + BASE);
-
-		ppdata &= ~0x0080;
-		*((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata;
-	}
-	
-	*((volatile unsigned short *)(MCF_MBAR+MCFSIM_CSCR3)) = 0x1180;
-}
-
-#endif
-
-/****************************************************************************/
-#endif	/* mcfsmc_h */
diff --git a/arch/m68knommu/include/asm/mcftimer.h b/arch/m68knommu/include/asm/mcftimer.h
deleted file mode 100644
index 0f90f6d2227a..000000000000
--- a/arch/m68knommu/include/asm/mcftimer.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcftimer.h -- ColdFire internal TIMER support defines.
- *
- *	(C) Copyright 1999-2006, Greg Ungerer <gerg@snapgear.com>
- * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
- */
-
-/****************************************************************************/
-#ifndef	mcftimer_h
-#define	mcftimer_h
-/****************************************************************************/
-
-
-/*
- *	Get address specific defines for this ColdFire member.
- */
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
-#define	MCFTIMER_BASE1		0x100		/* Base address of TIMER1 */
-#define	MCFTIMER_BASE2		0x120		/* Base address of TIMER2 */
-#elif defined(CONFIG_M5272)
-#define MCFTIMER_BASE1		0x200           /* Base address of TIMER1 */
-#define MCFTIMER_BASE2		0x220           /* Base address of TIMER2 */
-#define MCFTIMER_BASE3		0x240           /* Base address of TIMER4 */
-#define MCFTIMER_BASE4		0x260           /* Base address of TIMER3 */
-#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
-#define MCFTIMER_BASE1		0x140           /* Base address of TIMER1 */
-#define MCFTIMER_BASE2		0x180           /* Base address of TIMER2 */
-#elif defined(CONFIG_M532x)
-#define MCFTIMER_BASE1		0xfc070000	/* Base address of TIMER1 */
-#define MCFTIMER_BASE2		0xfc074000	/* Base address of TIMER2 */
-#define MCFTIMER_BASE3		0xfc078000	/* Base address of TIMER3 */
-#define MCFTIMER_BASE4		0xfc07c000	/* Base address of TIMER4 */
-#endif
-
-
-/*
- *	Define the TIMER register set addresses.
- */
-#define	MCFTIMER_TMR		0x00		/* Timer Mode reg (r/w) */
-#define	MCFTIMER_TRR		0x04		/* Timer Reference (r/w) */
-#define	MCFTIMER_TCR		0x08		/* Timer Capture reg (r/w) */
-#define	MCFTIMER_TCN		0x0C		/* Timer Counter reg (r/w) */
-#if defined(CONFIG_M532x)
-#define	MCFTIMER_TER		0x03		/* Timer Event reg (r/w) */
-#else
-#define	MCFTIMER_TER		0x11		/* Timer Event reg (r/w) */
-#endif
-
-/*
- *	Bit definitions for the Timer Mode Register (TMR).
- *	Register bit flags are common accross ColdFires.
- */
-#define	MCFTIMER_TMR_PREMASK	0xff00		/* Prescalar mask */
-#define	MCFTIMER_TMR_DISCE	0x0000		/* Disable capture */
-#define	MCFTIMER_TMR_ANYCE	0x00c0		/* Capture any edge */
-#define	MCFTIMER_TMR_FALLCE	0x0080		/* Capture fallingedge */
-#define	MCFTIMER_TMR_RISECE	0x0040		/* Capture rising edge */
-#define	MCFTIMER_TMR_ENOM	0x0020		/* Enable output toggle */
-#define	MCFTIMER_TMR_DISOM	0x0000		/* Do single output pulse  */
-#define	MCFTIMER_TMR_ENORI	0x0010		/* Enable ref interrupt */
-#define	MCFTIMER_TMR_DISORI	0x0000		/* Disable ref interrupt */
-#define	MCFTIMER_TMR_RESTART	0x0008		/* Restart counter */
-#define	MCFTIMER_TMR_FREERUN	0x0000		/* Free running counter */
-#define	MCFTIMER_TMR_CLKTIN	0x0006		/* Input clock is TIN */
-#define	MCFTIMER_TMR_CLK16	0x0004		/* Input clock is /16 */
-#define	MCFTIMER_TMR_CLK1	0x0002		/* Input clock is /1 */
-#define	MCFTIMER_TMR_CLKSTOP	0x0000		/* Stop counter */
-#define	MCFTIMER_TMR_ENABLE	0x0001		/* Enable timer */
-#define	MCFTIMER_TMR_DISABLE	0x0000		/* Disable timer */
-
-/*
- *	Bit definitions for the Timer Event Registers (TER).
- */
-#define	MCFTIMER_TER_CAP	0x01		/* Capture event */
-#define	MCFTIMER_TER_REF	0x02		/* Refernece event */
-
-/****************************************************************************/
-#endif	/* mcftimer_h */
diff --git a/arch/m68knommu/include/asm/mcfuart.h b/arch/m68knommu/include/asm/mcfuart.h
deleted file mode 100644
index ef2293873612..000000000000
--- a/arch/m68knommu/include/asm/mcfuart.h
+++ /dev/null
@@ -1,216 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcfuart.h -- ColdFire internal UART support defines.
- *
- *	(C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
- * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
- */
-
-/****************************************************************************/
-#ifndef	mcfuart_h
-#define	mcfuart_h
-/****************************************************************************/
-
-/*
- *	Define the base address of the UARTS within the MBAR address
- *	space.
- */
-#if defined(CONFIG_M5272)
-#define	MCFUART_BASE1		0x100		/* Base address of UART1 */
-#define	MCFUART_BASE2		0x140		/* Base address of UART2 */
-#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e)
-#if defined(CONFIG_NETtel)
-#define	MCFUART_BASE1		0x180		/* Base address of UART1 */
-#define	MCFUART_BASE2		0x140		/* Base address of UART2 */
-#else
-#define	MCFUART_BASE1		0x140		/* Base address of UART1 */
-#define	MCFUART_BASE2		0x180		/* Base address of UART2 */
-#endif
-#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
-#define MCFUART_BASE1		0x200           /* Base address of UART1 */
-#define MCFUART_BASE2		0x240           /* Base address of UART2 */
-#define MCFUART_BASE3		0x280           /* Base address of UART3 */
-#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
-#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
-#define MCFUART_BASE1		0x200           /* Base address of UART1 */
-#define MCFUART_BASE2		0x1c0           /* Base address of UART2 */
-#else
-#define MCFUART_BASE1		0x1c0           /* Base address of UART1 */
-#define MCFUART_BASE2		0x200           /* Base address of UART2 */
-#endif
-#elif defined(CONFIG_M520x)
-#define MCFUART_BASE1		0x60000		/* Base address of UART1 */
-#define MCFUART_BASE2		0x64000		/* Base address of UART2 */
-#define MCFUART_BASE3		0x68000		/* Base address of UART2 */
-#elif defined(CONFIG_M532x)
-#define MCFUART_BASE1		0xfc060000	/* Base address of UART1 */
-#define MCFUART_BASE2		0xfc064000	/* Base address of UART2 */
-#define MCFUART_BASE3		0xfc068000	/* Base address of UART3 */
-#endif
-
-
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-
-struct mcf_platform_uart {
-	unsigned long	mapbase;	/* Physical address base */
-	void __iomem	*membase;	/* Virtual address if mapped */
-	unsigned int	irq;		/* Interrupt vector */
-	unsigned int	uartclk;	/* UART clock rate */
-};
-
-/*
- *	Define the ColdFire UART register set addresses.
- */
-#define	MCFUART_UMR		0x00		/* Mode register (r/w) */
-#define	MCFUART_USR		0x04		/* Status register (r) */
-#define	MCFUART_UCSR		0x04		/* Clock Select (w) */
-#define	MCFUART_UCR		0x08		/* Command register (w) */
-#define	MCFUART_URB		0x0c		/* Receiver Buffer (r) */
-#define	MCFUART_UTB		0x0c		/* Transmit Buffer (w) */
-#define	MCFUART_UIPCR		0x10		/* Input Port Change (r) */
-#define	MCFUART_UACR		0x10		/* Auxiliary Control (w) */
-#define	MCFUART_UISR		0x14		/* Interrupt Status (r) */
-#define	MCFUART_UIMR		0x14		/* Interrupt Mask (w) */
-#define	MCFUART_UBG1		0x18		/* Baud Rate MSB (r/w) */
-#define	MCFUART_UBG2		0x1c		/* Baud Rate LSB (r/w) */
-#ifdef	CONFIG_M5272
-#define	MCFUART_UTF		0x28		/* Transmitter FIFO (r/w) */
-#define	MCFUART_URF		0x2c		/* Receiver FIFO (r/w) */
-#define	MCFUART_UFPD		0x30		/* Frac Prec. Divider (r/w) */
-#else
-#define	MCFUART_UIVR		0x30		/* Interrupt Vector (r/w) */
-#endif
-#define	MCFUART_UIPR		0x34		/* Input Port (r) */
-#define	MCFUART_UOP1		0x38		/* Output Port Bit Set (w) */
-#define	MCFUART_UOP0		0x3c		/* Output Port Bit Reset (w) */
-
-
-/*
- *	Define bit flags in Mode Register 1 (MR1).
- */
-#define	MCFUART_MR1_RXRTS	0x80		/* Auto RTS flow control */
-#define	MCFUART_MR1_RXIRQFULL	0x40		/* RX IRQ type FULL */
-#define	MCFUART_MR1_RXIRQRDY	0x00		/* RX IRQ type RDY */
-#define	MCFUART_MR1_RXERRBLOCK	0x20		/* RX block error mode */
-#define	MCFUART_MR1_RXERRCHAR	0x00		/* RX char error mode */
-
-#define	MCFUART_MR1_PARITYNONE	0x10		/* No parity */
-#define	MCFUART_MR1_PARITYEVEN	0x00		/* Even parity */
-#define	MCFUART_MR1_PARITYODD	0x04		/* Odd parity */
-#define	MCFUART_MR1_PARITYSPACE	0x08		/* Space parity */
-#define	MCFUART_MR1_PARITYMARK	0x0c		/* Mark parity */
-
-#define	MCFUART_MR1_CS5		0x00		/* 5 bits per char */
-#define	MCFUART_MR1_CS6		0x01		/* 6 bits per char */
-#define	MCFUART_MR1_CS7		0x02		/* 7 bits per char */
-#define	MCFUART_MR1_CS8		0x03		/* 8 bits per char */
-
-/*
- *	Define bit flags in Mode Register 2 (MR2).
- */
-#define	MCFUART_MR2_LOOPBACK	0x80		/* Loopback mode */
-#define	MCFUART_MR2_REMOTELOOP	0xc0		/* Remote loopback mode */
-#define	MCFUART_MR2_AUTOECHO	0x40		/* Automatic echo */
-#define	MCFUART_MR2_TXRTS	0x20		/* Assert RTS on TX */
-#define	MCFUART_MR2_TXCTS	0x10		/* Auto CTS flow control */
-
-#define	MCFUART_MR2_STOP1	0x07		/* 1 stop bit */
-#define	MCFUART_MR2_STOP15	0x08		/* 1.5 stop bits */
-#define	MCFUART_MR2_STOP2	0x0f		/* 2 stop bits */
-
-/*
- *	Define bit flags in Status Register (USR).
- */
-#define	MCFUART_USR_RXBREAK	0x80		/* Received BREAK */
-#define	MCFUART_USR_RXFRAMING	0x40		/* Received framing error */
-#define	MCFUART_USR_RXPARITY	0x20		/* Received parity error */
-#define	MCFUART_USR_RXOVERRUN	0x10		/* Received overrun error */
-#define	MCFUART_USR_TXEMPTY	0x08		/* Transmitter empty */
-#define	MCFUART_USR_TXREADY	0x04		/* Transmitter ready */
-#define	MCFUART_USR_RXFULL	0x02		/* Receiver full */
-#define	MCFUART_USR_RXREADY	0x01		/* Receiver ready */
-
-#define	MCFUART_USR_RXERR	(MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \
-				MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN)
-
-/*
- *	Define bit flags in Clock Select Register (UCSR).
- */
-#define	MCFUART_UCSR_RXCLKTIMER	0xd0		/* RX clock is timer */
-#define	MCFUART_UCSR_RXCLKEXT16	0xe0		/* RX clock is external x16 */
-#define	MCFUART_UCSR_RXCLKEXT1	0xf0		/* RX clock is external x1 */
-
-#define	MCFUART_UCSR_TXCLKTIMER	0x0d		/* TX clock is timer */
-#define	MCFUART_UCSR_TXCLKEXT16	0x0e		/* TX clock is external x16 */
-#define	MCFUART_UCSR_TXCLKEXT1	0x0f		/* TX clock is external x1 */
-
-/*
- *	Define bit flags in Command Register (UCR).
- */
-#define	MCFUART_UCR_CMDNULL		0x00	/* No command */
-#define	MCFUART_UCR_CMDRESETMRPTR	0x10	/* Reset MR pointer */
-#define	MCFUART_UCR_CMDRESETRX		0x20	/* Reset receiver */
-#define	MCFUART_UCR_CMDRESETTX		0x30	/* Reset transmitter */
-#define	MCFUART_UCR_CMDRESETERR		0x40	/* Reset error status */
-#define	MCFUART_UCR_CMDRESETBREAK	0x50	/* Reset BREAK change */
-#define	MCFUART_UCR_CMDBREAKSTART	0x60	/* Start BREAK */
-#define	MCFUART_UCR_CMDBREAKSTOP	0x70	/* Stop BREAK */
-
-#define	MCFUART_UCR_TXNULL	0x00		/* No TX command */
-#define	MCFUART_UCR_TXENABLE	0x04		/* Enable TX */
-#define	MCFUART_UCR_TXDISABLE	0x08		/* Disable TX */
-#define	MCFUART_UCR_RXNULL	0x00		/* No RX command */
-#define	MCFUART_UCR_RXENABLE	0x01		/* Enable RX */
-#define	MCFUART_UCR_RXDISABLE	0x02		/* Disable RX */
-
-/*
- *	Define bit flags in Input Port Change Register (UIPCR).
- */
-#define	MCFUART_UIPCR_CTSCOS	0x10		/* CTS change of state */
-#define	MCFUART_UIPCR_CTS	0x01		/* CTS value */
-
-/*
- *	Define bit flags in Input Port Register (UIP).
- */
-#define	MCFUART_UIPR_CTS	0x01		/* CTS value */
-
-/*
- *	Define bit flags in Output Port Registers (UOP).
- *	Clear bit by writing to UOP0, set by writing to UOP1.
- */
-#define	MCFUART_UOP_RTS		0x01		/* RTS set or clear */
-
-/*
- *	Define bit flags in the Auxiliary Control Register (UACR).
- */
-#define	MCFUART_UACR_IEC	0x01		/* Input enable control */
-
-/*
- *	Define bit flags in Interrupt Status Register (UISR).
- *	These same bits are used for the Interrupt Mask Register (UIMR).
- */
-#define	MCFUART_UIR_COS		0x80		/* Change of state (CTS) */
-#define	MCFUART_UIR_DELTABREAK	0x04		/* Break start or stop */
-#define	MCFUART_UIR_RXREADY	0x02		/* Receiver ready */
-#define	MCFUART_UIR_TXREADY	0x01		/* Transmitter ready */
-
-#ifdef	CONFIG_M5272
-/*
- *	Define bit flags in the Transmitter FIFO Register (UTF).
- */
-#define	MCFUART_UTF_TXB		0x1f		/* Transmitter data level */
-#define	MCFUART_UTF_FULL	0x20		/* Transmitter fifo full */
-#define	MCFUART_UTF_TXS		0xc0		/* Transmitter status */
-
-/*
- *	Define bit flags in the Receiver FIFO Register (URF).
- */
-#define	MCFUART_URF_RXB		0x1f		/* Receiver data level */
-#define	MCFUART_URF_FULL	0x20		/* Receiver fifo full */
-#define	MCFUART_URF_RXS		0xc0		/* Receiver status */
-#endif
-
-/****************************************************************************/
-#endif	/* mcfuart_h */
diff --git a/arch/m68knommu/include/asm/mcfwdebug.h b/arch/m68knommu/include/asm/mcfwdebug.h
deleted file mode 100644
index 27f70e45d700..000000000000
--- a/arch/m68knommu/include/asm/mcfwdebug.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcfdebug.h -- ColdFire Debug Module support.
- *
- * 	(C) Copyright 2001, Lineo Inc. (www.lineo.com) 
- */
-
-/****************************************************************************/
-#ifndef mcfdebug_h
-#define mcfdebug_h
-/****************************************************************************/
-
-/* Define the debug module registers */
-#define MCFDEBUG_CSR	0x0			/* Configuration status		*/
-#define MCFDEBUG_BAAR	0x5			/* BDM address attribute	*/
-#define MCFDEBUG_AATR	0x6			/* Address attribute trigger	*/
-#define MCFDEBUG_TDR	0x7			/* Trigger definition		*/
-#define MCFDEBUG_PBR	0x8			/* PC breakpoint		*/
-#define MCFDEBUG_PBMR	0x9			/* PC breakpoint mask		*/
-#define MCFDEBUG_ABHR	0xc			/* High address breakpoint	*/
-#define MCFDEBUG_ABLR	0xd			/* Low address breakpoint	*/
-#define MCFDEBUG_DBR	0xe			/* Data breakpoint		*/
-#define MCFDEBUG_DBMR	0xf			/* Data breakpoint mask		*/
-
-/* Define some handy constants for the trigger definition register */
-#define MCFDEBUG_TDR_TRC_DISP	0x00000000	/* display on DDATA only	*/
-#define MCFDEBUG_TDR_TRC_HALT	0x40000000	/* Processor halt on BP		*/
-#define MCFDEBUG_TDR_TRC_INTR	0x80000000	/* Debug intr on BP		*/
-#define MCFDEBUG_TDR_LXT1	0x00004000	/* TDR level 1			*/
-#define MCFDEBUG_TDR_LXT2	0x00008000	/* TDR level 2			*/
-#define MCFDEBUG_TDR_EBL1	0x00002000	/* Enable breakpoint level 1	*/
-#define MCFDEBUG_TDR_EBL2	0x20000000	/* Enable breakpoint level 2	*/
-#define MCFDEBUG_TDR_EDLW1	0x00001000	/* Enable data BP longword	*/
-#define MCFDEBUG_TDR_EDLW2	0x10000000
-#define MCFDEBUG_TDR_EDWL1	0x00000800	/* Enable data BP lower word	*/
-#define MCFDEBUG_TDR_EDWL2	0x08000000
-#define MCFDEBUG_TDR_EDWU1	0x00000400	/* Enable data BP upper word	*/
-#define MCFDEBUG_TDR_EDWU2	0x04000000
-#define MCFDEBUG_TDR_EDLL1	0x00000200	/* Enable data BP low low byte	*/
-#define MCFDEBUG_TDR_EDLL2	0x02000000
-#define MCFDEBUG_TDR_EDLM1	0x00000100	/* Enable data BP low mid byte	*/
-#define MCFDEBUG_TDR_EDLM2	0x01000000
-#define MCFDEBUG_TDR_EDUM1	0x00000080	/* Enable data BP up mid byte	*/
-#define MCFDEBUG_TDR_EDUM2	0x00800000
-#define MCFDEBUG_TDR_EDUU1	0x00000040	/* Enable data BP up up byte	*/
-#define MCFDEBUG_TDR_EDUU2	0x00400000
-#define MCFDEBUG_TDR_DI1	0x00000020	/* Data BP invert		*/
-#define MCFDEBUG_TDR_DI2	0x00200000
-#define MCFDEBUG_TDR_EAI1	0x00000010	/* Enable address BP inverted	*/
-#define MCFDEBUG_TDR_EAI2	0x00100000
-#define MCFDEBUG_TDR_EAR1	0x00000008	/* Enable address BP range	*/
-#define MCFDEBUG_TDR_EAR2	0x00080000
-#define MCFDEBUG_TDR_EAL1	0x00000004	/* Enable address BP low	*/
-#define MCFDEBUG_TDR_EAL2	0x00040000
-#define MCFDEBUG_TDR_EPC1	0x00000002	/* Enable PC BP			*/
-#define MCFDEBUG_TDR_EPC2	0x00020000
-#define MCFDEBUG_TDR_PCI1	0x00000001	/* PC BP invert			*/
-#define MCFDEBUG_TDR_PCI2	0x00010000
-
-/* Constants for the address attribute trigger register */
-#define MCFDEBUG_AAR_RESET	0x00000005
-/* Fields not yet implemented */
-
-/* And some definitions for the writable sections of the CSR */
-#define MCFDEBUG_CSR_RESET	0x00100000
-#define MCFDEBUG_CSR_PSTCLK	0x00020000	/* PSTCLK disable		*/
-#define MCFDEBUG_CSR_IPW	0x00010000	/* Inhibit processor writes	*/
-#define MCFDEBUG_CSR_MAP	0x00008000	/* Processor refs in emul mode	*/
-#define MCFDEBUG_CSR_TRC	0x00004000	/* Emul mode on trace exception	*/
-#define MCFDEBUG_CSR_EMU	0x00002000	/* Force emulation mode		*/
-#define MCFDEBUG_CSR_DDC_READ	0x00000800	/* Debug data control		*/
-#define MCFDEBUG_CSR_DDC_WRITE	0x00001000
-#define MCFDEBUG_CSR_UHE	0x00000400	/* User mode halt enable	*/
-#define MCFDEBUG_CSR_BTB0	0x00000000	/* Branch target 0 bytes	*/
-#define MCFDEBUG_CSR_BTB2	0x00000100	/* Branch target 2 bytes	*/
-#define MCFDEBUG_CSR_BTB3	0x00000200	/* Branch target 3 bytes	*/
-#define MCFDEBUG_CSR_BTB4	0x00000300	/* Branch target 4 bytes	*/
-#define MCFDEBUG_CSR_NPL	0x00000040	/* Non-pipelined mode		*/
-#define MCFDEBUG_CSR_SSM	0x00000010	/* Single step mode		*/
-
-/* Constants for the BDM address attribute register */
-#define MCFDEBUG_BAAR_RESET	0x00000005
-/* Fields not yet implemented */
-
-
-/* This routine wrappers up the wdebug asm instruction so that the register
- * and value can be relatively easily specified.  The biggest hassle here is
- * that the debug module instructions (2 longs) must be long word aligned and
- * some pointer fiddling is performed to ensure this.
- */
-static inline void wdebug(int reg, unsigned long data) {
-	unsigned short dbg_spc[6];
-	unsigned short *dbg;
-
-	// Force alignment to long word boundary
-	dbg = (unsigned short *)((((unsigned long)dbg_spc) + 3) & 0xfffffffc);
-
-	// Build up the debug instruction
-	dbg[0] = 0x2c80 | (reg & 0xf);
-	dbg[1] = (data >> 16) & 0xffff;
-	dbg[2] = data & 0xffff;
-	dbg[3] = 0;
-
-	// Perform the wdebug instruction
-#if 0
-	// This strain is for gas which doesn't have the wdebug instructions defined
-	asm(	"move.l	%0, %%a0\n\t"
-		".word	0xfbd0\n\t"
-		".word	0x0003\n\t"
-	    :: "g" (dbg) : "a0");
-#else
-	// And this is for when it does
-	asm(	"wdebug	(%0)" :: "a" (dbg));
-#endif
-}
-
-#endif
diff --git a/arch/m68knommu/include/asm/md.h b/arch/m68knommu/include/asm/md.h
deleted file mode 100644
index d810c78de5ff..000000000000
--- a/arch/m68knommu/include/asm/md.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/md.h>
diff --git a/arch/m68knommu/include/asm/mman.h b/arch/m68knommu/include/asm/mman.h
deleted file mode 100644
index 4846c682efed..000000000000
--- a/arch/m68knommu/include/asm/mman.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/mman.h>
diff --git a/arch/m68knommu/include/asm/mmu.h b/arch/m68knommu/include/asm/mmu.h
deleted file mode 100644
index e2da1e6f09fe..000000000000
--- a/arch/m68knommu/include/asm/mmu.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __M68KNOMMU_MMU_H
-#define __M68KNOMMU_MMU_H
-
-/* Copyright (C) 2002, David McCullough <davidm@snapgear.com> */
-
-typedef struct {
-	unsigned long		end_brk;
-} mm_context_t;
-
-#endif /* __M68KNOMMU_MMU_H */
diff --git a/arch/m68knommu/include/asm/mmu_context.h b/arch/m68knommu/include/asm/mmu_context.h
deleted file mode 100644
index 9ccee4278c97..000000000000
--- a/arch/m68knommu/include/asm/mmu_context.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef __M68KNOMMU_MMU_CONTEXT_H
-#define __M68KNOMMU_MMU_CONTEXT_H
-
-#include <asm/setup.h>
-#include <asm/page.h>
-#include <asm/pgalloc.h>
-#include <asm-generic/mm_hooks.h>
-
-static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-}
-
-static inline int
-init_new_context(struct task_struct *tsk, struct mm_struct *mm)
-{
-	// mm->context = virt_to_phys(mm->pgd);
-	return(0);
-}
-
-#define destroy_context(mm)		do { } while(0)
-
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
-{
-}
-
-#define deactivate_mm(tsk,mm)	do { } while (0)
-
-static inline void activate_mm(struct mm_struct *prev_mm,
-			       struct mm_struct *next_mm)
-{
-}
-
-#endif
diff --git a/arch/m68knommu/include/asm/module.h b/arch/m68knommu/include/asm/module.h
deleted file mode 100644
index 2e45ab50b232..000000000000
--- a/arch/m68knommu/include/asm/module.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef ASM_M68KNOMMU_MODULE_H
-#define ASM_M68KNOMMU_MODULE_H
-
-struct mod_arch_specific {
-};
-
-#define Elf_Shdr Elf32_Shdr
-#define Elf_Sym Elf32_Sym
-#define Elf_Ehdr Elf32_Ehdr
-
-#endif /* ASM_M68KNOMMU_MODULE_H */
diff --git a/arch/m68knommu/include/asm/movs.h b/arch/m68knommu/include/asm/movs.h
deleted file mode 100644
index 81a16779e833..000000000000
--- a/arch/m68knommu/include/asm/movs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/movs.h>
diff --git a/arch/m68knommu/include/asm/msgbuf.h b/arch/m68knommu/include/asm/msgbuf.h
deleted file mode 100644
index bdfadec4d52d..000000000000
--- a/arch/m68knommu/include/asm/msgbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/msgbuf.h>
diff --git a/arch/m68knommu/include/asm/mutex.h b/arch/m68knommu/include/asm/mutex.h
deleted file mode 100644
index 458c1f7fbc18..000000000000
--- a/arch/m68knommu/include/asm/mutex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Pull in the generic implementation for the mutex fastpath.
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-
-#include <asm-generic/mutex-dec.h>
diff --git a/arch/m68knommu/include/asm/nettel.h b/arch/m68knommu/include/asm/nettel.h
deleted file mode 100644
index 0299f6a2deeb..000000000000
--- a/arch/m68knommu/include/asm/nettel.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/****************************************************************************/
-
-/*
- *	nettel.h -- Lineo (formerly Moreton Bay) NETtel support.
- *
- *	(C) Copyright 1999-2000, Moreton Bay (www.moretonbay.com)
- * 	(C) Copyright 2000-2001, Lineo Inc. (www.lineo.com) 
- * 	(C) Copyright 2001-2002, SnapGear Inc., (www.snapgear.com) 
- */
-
-/****************************************************************************/
-#ifndef	nettel_h
-#define	nettel_h
-/****************************************************************************/
-
-
-/****************************************************************************/
-#ifdef CONFIG_NETtel
-/****************************************************************************/
-
-#ifdef CONFIG_COLDFIRE
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#endif
-
-/*---------------------------------------------------------------------------*/
-#if defined(CONFIG_M5307)
-/*
- *	NETtel/5307 based hardware first. DTR/DCD lines are wired to
- *	GPIO lines. Most of the LED's are driver through a latch
- *	connected to CS2.
- */
-#define	MCFPP_DCD1	0x0001
-#define	MCFPP_DCD0	0x0002
-#define	MCFPP_DTR1	0x0004
-#define	MCFPP_DTR0	0x0008
-
-#define	NETtel_LEDADDR	0x30400000
-
-#ifndef __ASSEMBLY__
-
-extern volatile unsigned short ppdata;
-
-/*
- *	These functions defined to give quasi generic access to the
- *	PPIO bits used for DTR/DCD.
- */
-static __inline__ unsigned int mcf_getppdata(void)
-{
-	volatile unsigned short *pp;
-	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
-	return((unsigned int) *pp);
-}
-
-static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
-{
-	volatile unsigned short *pp;
-	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
-	ppdata = (ppdata & ~mask) | bits;
-	*pp = ppdata;
-}
-#endif
-
-/*---------------------------------------------------------------------------*/
-#elif defined(CONFIG_M5206e)
-/*
- *	NETtel/5206e based hardware has leds on latch on CS3.
- *	No support modem for lines??
- */
-#define	NETtel_LEDADDR	0x50000000
-
-/*---------------------------------------------------------------------------*/
-#elif defined(CONFIG_M5272)
-/*
- *	NETtel/5272 based hardware. DTR/DCD lines are wired to GPB lines.
- */
-#define	MCFPP_DCD0	0x0080
-#define	MCFPP_DCD1	0x0000		/* Port 1 no DCD support */
-#define	MCFPP_DTR0	0x0040
-#define	MCFPP_DTR1	0x0000		/* Port 1 no DTR support */
-
-#ifndef __ASSEMBLY__
-/*
- *	These functions defined to give quasi generic access to the
- *	PPIO bits used for DTR/DCD.
- */
-static __inline__ unsigned int mcf_getppdata(void)
-{
-	volatile unsigned short *pp;
-	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT);
-	return((unsigned int) *pp);
-}
-
-static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
-{
-	volatile unsigned short *pp;
-	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT);
-	*pp = (*pp & ~mask) | bits;
-}
-#endif
-
-#endif
-/*---------------------------------------------------------------------------*/
-
-/****************************************************************************/
-#endif /* CONFIG_NETtel */
-/****************************************************************************/
-#endif	/* nettel_h */
diff --git a/arch/m68knommu/include/asm/openprom.h b/arch/m68knommu/include/asm/openprom.h
deleted file mode 100644
index fdba7953ff9f..000000000000
--- a/arch/m68knommu/include/asm/openprom.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/openprom.h>
diff --git a/arch/m68knommu/include/asm/oplib.h b/arch/m68knommu/include/asm/oplib.h
deleted file mode 100644
index ce079dc332d9..000000000000
--- a/arch/m68knommu/include/asm/oplib.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/oplib.h>
diff --git a/arch/m68knommu/include/asm/page.h b/arch/m68knommu/include/asm/page.h
deleted file mode 100644
index 3a1ede4544cb..000000000000
--- a/arch/m68knommu/include/asm/page.h
+++ /dev/null
@@ -1,77 +0,0 @@
-#ifndef _M68KNOMMU_PAGE_H
-#define _M68KNOMMU_PAGE_H
-
-/* PAGE_SHIFT determines the page size */
-
-#define PAGE_SHIFT	(12)
-#define PAGE_SIZE	(1UL << PAGE_SHIFT)
-#define PAGE_MASK	(~(PAGE_SIZE-1))
-
-#include <asm/setup.h>
-
-#ifndef __ASSEMBLY__
- 
-#define get_user_page(vaddr)		__get_free_page(GFP_KERNEL)
-#define free_user_page(page, addr)	free_page(addr)
-
-#define clear_page(page)	memset((page), 0, PAGE_SIZE)
-#define copy_page(to,from)	memcpy((to), (from), PAGE_SIZE)
-
-#define clear_user_page(page, vaddr, pg)	clear_page(page)
-#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
-
-#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \
-	alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
-#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
-
-/*
- * These are used to make use of C type-checking..
- */
-typedef struct { unsigned long pte; } pte_t;
-typedef struct { unsigned long pmd[16]; } pmd_t;
-typedef struct { unsigned long pgd; } pgd_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-typedef struct page *pgtable_t;
-
-#define pte_val(x)	((x).pte)
-#define pmd_val(x)	((&x)->pmd[0])
-#define pgd_val(x)	((x).pgd)
-#define pgprot_val(x)	((x).pgprot)
-
-#define __pte(x)	((pte_t) { (x) } )
-#define __pmd(x)	((pmd_t) { (x) } )
-#define __pgd(x)	((pgd_t) { (x) } )
-#define __pgprot(x)	((pgprot_t) { (x) } )
-
-extern unsigned long memory_start;
-extern unsigned long memory_end;
-
-#endif /* !__ASSEMBLY__ */
-
-#include <asm/page_offset.h>
-
-#define PAGE_OFFSET		(PAGE_OFFSET_RAW)
-
-#ifndef __ASSEMBLY__
-
-#define __pa(vaddr)		virt_to_phys((void *)(vaddr))
-#define __va(paddr)		phys_to_virt((unsigned long)(paddr))
-
-#define virt_to_pfn(kaddr)	(__pa(kaddr) >> PAGE_SHIFT)
-#define pfn_to_virt(pfn)	__va((pfn) << PAGE_SHIFT)
-
-#define virt_to_page(addr)	(mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
-#define page_to_virt(page)	((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
-
-#define pfn_to_page(pfn)	virt_to_page(pfn_to_virt(pfn))
-#define page_to_pfn(page)	virt_to_pfn(page_to_virt(page))
-#define pfn_valid(pfn)	        ((pfn) < max_mapnr)
-
-#define	virt_addr_valid(kaddr)	(((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
-				((void *)(kaddr) < (void *)memory_end))
-
-#endif /* __ASSEMBLY__ */
-
-#include <asm-generic/page.h>
-
-#endif /* _M68KNOMMU_PAGE_H */
diff --git a/arch/m68knommu/include/asm/page_offset.h b/arch/m68knommu/include/asm/page_offset.h
deleted file mode 100644
index d4e73e0ba646..000000000000
--- a/arch/m68knommu/include/asm/page_offset.h
+++ /dev/null
@@ -1,5 +0,0 @@
-
-
-/* This handles the memory map.. */
-#define	PAGE_OFFSET_RAW		CONFIG_RAMBASE
-
diff --git a/arch/m68knommu/include/asm/param.h b/arch/m68knommu/include/asm/param.h
deleted file mode 100644
index 6044397adb64..000000000000
--- a/arch/m68knommu/include/asm/param.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _M68KNOMMU_PARAM_H
-#define _M68KNOMMU_PARAM_H
-
-#ifdef __KERNEL__
-#define HZ CONFIG_HZ
-#define	USER_HZ		HZ
-#define	CLOCKS_PER_SEC	(USER_HZ)
-#endif
-
-#ifndef HZ
-#define HZ	100
-#endif
-
-#define EXEC_PAGESIZE	4096
-
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
-
-#endif /* _M68KNOMMU_PARAM_H */
diff --git a/arch/m68knommu/include/asm/pci.h b/arch/m68knommu/include/asm/pci.h
deleted file mode 100644
index a13f3cc87451..000000000000
--- a/arch/m68knommu/include/asm/pci.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef M68KNOMMU_PCI_H
-#define	M68KNOMMU_PCI_H
-
-#include <asm-m68k/pci.h>
-
-#ifdef CONFIG_COMEMPCI
-/*
- *	These are pretty much arbitary with the CoMEM implementation.
- *	We have the whole address space to ourselves.
- */
-#define PCIBIOS_MIN_IO		0x100
-#define PCIBIOS_MIN_MEM		0x00010000
-
-#define pcibios_scan_all_fns(a, b)	0
-
-/*
- * Return whether the given PCI device DMA address mask can
- * be supported properly.  For example, if your device can
- * only drive the low 24-bits during PCI bus mastering, then
- * you would pass 0x00ffffff as the mask to this function.
- */
-static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask)
-{
-	return 1;
-}
-
-#endif /* CONFIG_COMEMPCI */
-
-#endif /* M68KNOMMU_PCI_H */
diff --git a/arch/m68knommu/include/asm/percpu.h b/arch/m68knommu/include/asm/percpu.h
deleted file mode 100644
index 5de72c327efd..000000000000
--- a/arch/m68knommu/include/asm/percpu.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ARCH_M68KNOMMU_PERCPU__
-#define __ARCH_M68KNOMMU_PERCPU__
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ARCH_M68KNOMMU_PERCPU__ */
diff --git a/arch/m68knommu/include/asm/pgalloc.h b/arch/m68knommu/include/asm/pgalloc.h
deleted file mode 100644
index d6352f671ec0..000000000000
--- a/arch/m68knommu/include/asm/pgalloc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _M68KNOMMU_PGALLOC_H
-#define _M68KNOMMU_PGALLOC_H
-
-#include <asm/setup.h>
-
-#define check_pgt_cache()	do { } while (0)
-
-#endif /* _M68KNOMMU_PGALLOC_H */
diff --git a/arch/m68knommu/include/asm/pgtable.h b/arch/m68knommu/include/asm/pgtable.h
deleted file mode 100644
index 46251016e821..000000000000
--- a/arch/m68knommu/include/asm/pgtable.h
+++ /dev/null
@@ -1,70 +0,0 @@
-#ifndef _M68KNOMMU_PGTABLE_H
-#define _M68KNOMMU_PGTABLE_H
-
-#include <asm-generic/4level-fixup.h>
-
-/*
- * (C) Copyright 2000-2002, Greg Ungerer <gerg@snapgear.com>
- */
-
-#include <linux/slab.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/io.h>
-
-/*
- * Trivial page table functions.
- */
-#define pgd_present(pgd)	(1)
-#define pgd_none(pgd)		(0)
-#define pgd_bad(pgd)		(0)
-#define pgd_clear(pgdp)
-#define kern_addr_valid(addr)	(1)
-#define	pmd_offset(a, b)	((void *)0)
-
-#define PAGE_NONE	__pgprot(0)
-#define PAGE_SHARED	__pgprot(0)
-#define PAGE_COPY	__pgprot(0)
-#define PAGE_READONLY	__pgprot(0)
-#define PAGE_KERNEL	__pgprot(0)
-
-extern void paging_init(void);
-#define swapper_pg_dir ((pgd_t *) 0)
-
-#define __swp_type(x)		(0)
-#define __swp_offset(x)		(0)
-#define __swp_entry(typ,off)	((swp_entry_t) { ((typ) | ((off) << 7)) })
-#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
-
-static inline int pte_file(pte_t pte) { return 0; }
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-#define ZERO_PAGE(vaddr)	(virt_to_page(0))
-
-/*
- * These would be in other places but having them here reduces the diffs.
- */
-extern unsigned int kobjsize(const void *objp);
-
-/*
- * No page table caches to initialise.
- */
-#define pgtable_cache_init()	do { } while (0)
-
-#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
-		remap_pfn_range(vma, vaddr, pfn, size, prot)
-
-/*
- * All 32bit addresses are effectively valid for vmalloc...
- * Sort of meaningless for non-VM targets.
- */
-#define	VMALLOC_START	0
-#define	VMALLOC_END	0xffffffff
-
-#include <asm-generic/pgtable.h>
-
-#endif /* _M68KNOMMU_PGTABLE_H */
diff --git a/arch/m68knommu/include/asm/poll.h b/arch/m68knommu/include/asm/poll.h
deleted file mode 100644
index ee1b6cb549ca..000000000000
--- a/arch/m68knommu/include/asm/poll.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/poll.h>
diff --git a/arch/m68knommu/include/asm/posix_types.h b/arch/m68knommu/include/asm/posix_types.h
deleted file mode 100644
index 6205fb9392a3..000000000000
--- a/arch/m68knommu/include/asm/posix_types.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/posix_types.h>
diff --git a/arch/m68knommu/include/asm/processor.h b/arch/m68knommu/include/asm/processor.h
deleted file mode 100644
index 91cba18acdd3..000000000000
--- a/arch/m68knommu/include/asm/processor.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * include/asm-m68knommu/processor.h
- *
- * Copyright (C) 1995 Hamish Macdonald
- */
-
-#ifndef __ASM_M68K_PROCESSOR_H
-#define __ASM_M68K_PROCESSOR_H
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ __label__ _l; _l: &&_l;})
-
-#include <linux/compiler.h>
-#include <linux/threads.h>
-#include <asm/types.h>
-#include <asm/segment.h>
-#include <asm/fpu.h>
-#include <asm/ptrace.h>
-#include <asm/current.h>
-
-static inline unsigned long rdusp(void)
-{
-#ifdef CONFIG_COLDFIRE
-	extern unsigned int sw_usp;
-	return(sw_usp);
-#else
-  	unsigned long usp;
-	__asm__ __volatile__("move %/usp,%0" : "=a" (usp));
-	return usp;
-#endif
-}
-
-static inline void wrusp(unsigned long usp)
-{
-#ifdef CONFIG_COLDFIRE
-	extern unsigned int sw_usp;
-	sw_usp = usp;
-#else
-	__asm__ __volatile__("move %0,%/usp" : : "a" (usp));
-#endif
-}
-
-/*
- * User space process size: 3.75GB. This is hardcoded into a few places,
- * so don't change it unless you know what you are doing.
- */
-#define TASK_SIZE	(0xF0000000UL)
-
-/*
- * This decides where the kernel will search for a free chunk of vm
- * space during mmap's. We won't be using it
- */
-#define TASK_UNMAPPED_BASE	0
-
-/* 
- * if you change this structure, you must change the code and offsets
- * in m68k/machasm.S
- */
-   
-struct thread_struct {
-	unsigned long  ksp;		/* kernel stack pointer */
-	unsigned long  usp;		/* user stack pointer */
-	unsigned short sr;		/* saved status register */
-	unsigned short fs;		/* saved fs (sfc, dfc) */
-	unsigned long  crp[2];		/* cpu root pointer */
-	unsigned long  esp0;		/* points to SR of stack frame */
-	unsigned long  fp[8*3];
-	unsigned long  fpcntl[3];	/* fp control regs */
-	unsigned char  fpstate[FPSTATESIZE];  /* floating point state */
-};
-
-#define INIT_THREAD  { \
-	sizeof(init_stack) + (unsigned long) init_stack, 0, \
-	PS_S, __KERNEL_DS, \
-	{0, 0}, 0, {0,}, {0, 0, 0}, {0,}, \
-}
-
-/*
- * Coldfire stacks need to be re-aligned on trap exit, conventional
- * 68k can handle this case cleanly.
- */
-#if defined(CONFIG_COLDFIRE)
-#define	reformat(_regs)		do { (_regs)->format = 0x4; } while(0)
-#else
-#define	reformat(_regs)		do { } while (0)
-#endif
-
-/*
- * Do necessary setup to start up a newly executed thread.
- *
- * pass the data segment into user programs if it exists,
- * it can't hurt anything as far as I can tell
- */
-#define start_thread(_regs, _pc, _usp)			\
-do {							\
-	set_fs(USER_DS); /* reads from user space */	\
-	(_regs)->pc = (_pc);				\
-	((struct switch_stack *)(_regs))[-1].a6 = 0;	\
-	reformat(_regs);				\
-	if (current->mm)				\
-		(_regs)->d5 = current->mm->start_data;	\
-	(_regs)->sr &= ~0x2000;				\
-	wrusp(_usp);					\
-} while(0)
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-
-/* Free all resources held by a thread. */
-static inline void release_thread(struct task_struct *dead_task)
-{
-}
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk)	do { } while (0)
-
-extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-
-/*
- * Free current thread data structures etc..
- */
-static inline void exit_thread(void)
-{
-}
-
-unsigned long thread_saved_pc(struct task_struct *tsk);
-unsigned long get_wchan(struct task_struct *p);
-
-#define	KSTK_EIP(tsk)	\
-    ({			\
-	unsigned long eip = 0;	 \
-	if ((tsk)->thread.esp0 > PAGE_SIZE && \
-	    (virt_addr_valid((tsk)->thread.esp0))) \
-	      eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
-	eip; })
-#define	KSTK_ESP(tsk)	((tsk) == current ? rdusp() : (tsk)->thread.usp)
-
-#define cpu_relax()    barrier()
-
-#endif
diff --git a/arch/m68knommu/include/asm/ptrace.h b/arch/m68knommu/include/asm/ptrace.h
deleted file mode 100644
index 8c9194b98548..000000000000
--- a/arch/m68knommu/include/asm/ptrace.h
+++ /dev/null
@@ -1,87 +0,0 @@
-#ifndef _M68K_PTRACE_H
-#define _M68K_PTRACE_H
-
-#define PT_D1	   0
-#define PT_D2	   1
-#define PT_D3	   2
-#define PT_D4	   3
-#define PT_D5	   4
-#define PT_D6	   5
-#define PT_D7	   6
-#define PT_A0	   7
-#define PT_A1	   8
-#define PT_A2	   9
-#define PT_A3	   10
-#define PT_A4	   11
-#define PT_A5	   12
-#define PT_A6	   13
-#define PT_D0	   14
-#define PT_USP	   15
-#define PT_ORIG_D0 16
-#define PT_SR	   17
-#define PT_PC	   18
-
-#ifndef __ASSEMBLY__
-
-/* this struct defines the way the registers are stored on the
-   stack during a system call. */
-
-struct pt_regs {
-  long     d1;
-  long     d2;
-  long     d3;
-  long     d4;
-  long     d5;
-  long     a0;
-  long     a1;
-  long     a2;
-  long     d0;
-  long     orig_d0;
-  long     stkadj;
-#ifdef CONFIG_COLDFIRE
-  unsigned format :  4; /* frame format specifier */
-  unsigned vector : 12; /* vector offset */
-  unsigned short sr;
-  unsigned long  pc;
-#else
-  unsigned short sr;
-  unsigned long  pc;
-  unsigned format :  4; /* frame format specifier */
-  unsigned vector : 12; /* vector offset */
-#endif
-};
-
-/*
- * This is the extended stack used by signal handlers and the context
- * switcher: it's pushed after the normal "struct pt_regs".
- */
-struct switch_stack {
-	unsigned long  d6;
-	unsigned long  d7;
-	unsigned long  a3;
-	unsigned long  a4;
-	unsigned long  a5;
-	unsigned long  a6;
-	unsigned long  retpc;
-};
-
-/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-#define PTRACE_GETREGS            12
-#define PTRACE_SETREGS            13
-#define PTRACE_GETFPREGS          14
-#define PTRACE_SETFPREGS          15
-
-#ifdef __KERNEL__
-
-#ifndef PS_S
-#define PS_S  (0x2000)
-#define PS_M  (0x1000)
-#endif
-
-#define user_mode(regs) (!((regs)->sr & PS_S))
-#define instruction_pointer(regs) ((regs)->pc)
-#define profile_pc(regs) instruction_pointer(regs)
-extern void show_regs(struct pt_regs *);
-#endif /* __KERNEL__ */
-#endif /* __ASSEMBLY__ */
-#endif /* _M68K_PTRACE_H */
diff --git a/arch/m68knommu/include/asm/quicc_simple.h b/arch/m68knommu/include/asm/quicc_simple.h
deleted file mode 100644
index c3636932d4bc..000000000000
--- a/arch/m68knommu/include/asm/quicc_simple.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/***********************************
- * $Id: quicc_simple.h,v 1.1 2002/03/02 15:01:10 gerg Exp $
- ***********************************
- *
- ***************************************
- * Simple drivers common header
- ***************************************
- */
-
-#ifndef __SIMPLE_H
-#define __SIMPLE_H
-
-/* #include "quicc.h" */
-
-#define GLB_SCC_0   0
-#define GLB_SCC_1   1
-#define GLB_SCC_2   2
-#define GLB_SCC_3   3
-
-typedef void (int_routine)(unsigned short interrupt_event);
-typedef int_routine *int_routine_ptr; 
-typedef void *(alloc_routine)(int length);
-typedef void (free_routine)(int scc_num, int channel_num, void *buf);
-typedef void (store_rx_buffer_routine)(int scc_num, int channel_num, void *buff, int length);
-typedef int  (handle_tx_error_routine)(int scc_num, int channel_num, QUICC_BD *tbd);
-typedef void (handle_rx_error_routine)(int scc_num, int channel_num, QUICC_BD *rbd);
-typedef void (handle_lost_error_routine)(int scc_num, int channel_num);
-
-/* user defined functions for global errors */
-typedef void (handle_glob_overrun_routine)(int scc_number);
-typedef void (handle_glob_underrun_routine)(int scc_number);
-typedef void (glob_intr_q_overflow_routine)(int scc_number);
-
-/*
- * General initialization and command routines
- */
-void quicc_issue_cmd (unsigned short cmd, int scc_num);
-void quicc_init(void);
-void quicc_scc_init(int scc_number, int number_of_rx_buf, int number_of_tx_buf);
-void quicc_smc_init(int smc_number, int number_of_rx_buf, int number_of_tx_buf);
-void quicc_scc_start(int scc_num);
-void quicc_scc_loopback(int scc_num);
-
-/* Interrupt enable/disable routines for critical pieces of code*/
-unsigned short  IntrDis(void);
-void            IntrEna(unsigned short old_sr);
-
-/* For debugging */
-void print_rbd(int scc_num);
-void print_tbd(int scc_num);
-
-#endif
diff --git a/arch/m68knommu/include/asm/resource.h b/arch/m68knommu/include/asm/resource.h
deleted file mode 100644
index 7fa63d5ea576..000000000000
--- a/arch/m68knommu/include/asm/resource.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/resource.h>
diff --git a/arch/m68knommu/include/asm/rtc.h b/arch/m68knommu/include/asm/rtc.h
deleted file mode 100644
index eaf18ec83c8e..000000000000
--- a/arch/m68knommu/include/asm/rtc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/rtc.h>
diff --git a/arch/m68knommu/include/asm/scatterlist.h b/arch/m68knommu/include/asm/scatterlist.h
deleted file mode 100644
index afc4788b0d2c..000000000000
--- a/arch/m68knommu/include/asm/scatterlist.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _M68KNOMMU_SCATTERLIST_H
-#define _M68KNOMMU_SCATTERLIST_H
-
-#include <linux/mm.h>
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long	sg_magic;
-#endif
-	unsigned long	page_link;
-	unsigned int	offset;
-	dma_addr_t	dma_address;
-	unsigned int	length;
-};
-
-#define sg_dma_address(sg)      ((sg)->dma_address)
-#define sg_dma_len(sg)          ((sg)->length)
-
-#define ISA_DMA_THRESHOLD	(0xffffffff)
-
-#endif /* !(_M68KNOMMU_SCATTERLIST_H) */
diff --git a/arch/m68knommu/include/asm/sections.h b/arch/m68knommu/include/asm/sections.h
deleted file mode 100644
index dd0ecb98ec08..000000000000
--- a/arch/m68knommu/include/asm/sections.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _M68KNOMMU_SECTIONS_H
-#define _M68KNOMMU_SECTIONS_H
-
-/* nothing to see, move along */
-#include <asm-generic/sections.h>
-
-#endif
diff --git a/arch/m68knommu/include/asm/segment.h b/arch/m68knommu/include/asm/segment.h
deleted file mode 100644
index 42318ebec7ec..000000000000
--- a/arch/m68knommu/include/asm/segment.h
+++ /dev/null
@@ -1,51 +0,0 @@
-#ifndef _M68K_SEGMENT_H
-#define _M68K_SEGMENT_H
-
-/* define constants */
-/* Address spaces (FC0-FC2) */
-#define USER_DATA     (1)
-#ifndef __USER_DS
-#define __USER_DS     (USER_DATA)
-#endif
-#define USER_PROGRAM  (2)
-#define SUPER_DATA    (5)
-#ifndef __KERNEL_DS
-#define __KERNEL_DS   (SUPER_DATA)
-#endif
-#define SUPER_PROGRAM (6)
-#define CPU_SPACE     (7)
-
-#ifndef __ASSEMBLY__
-
-typedef struct {
-	unsigned long seg;
-} mm_segment_t;
-
-#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
-#define USER_DS		MAKE_MM_SEG(__USER_DS)
-#define KERNEL_DS	MAKE_MM_SEG(__KERNEL_DS)
-
-/*
- * Get/set the SFC/DFC registers for MOVES instructions
- */
-
-static inline mm_segment_t get_fs(void)
-{
-    return USER_DS;
-}
-
-static inline mm_segment_t get_ds(void)
-{
-    /* return the supervisor data space code */
-    return KERNEL_DS;
-}
-
-static inline void set_fs(mm_segment_t val)
-{
-}
-
-#define segment_eq(a,b)	((a).seg == (b).seg)
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _M68K_SEGMENT_H */
diff --git a/arch/m68knommu/include/asm/sembuf.h b/arch/m68knommu/include/asm/sembuf.h
deleted file mode 100644
index 3a634f9ecf50..000000000000
--- a/arch/m68knommu/include/asm/sembuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/sembuf.h>
diff --git a/arch/m68knommu/include/asm/setup.h b/arch/m68knommu/include/asm/setup.h
deleted file mode 100644
index fb86bb2a6078..000000000000
--- a/arch/m68knommu/include/asm/setup.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifdef __KERNEL__
-
-#include <asm-m68k/setup.h>
-
-/* We have a bigger command line buffer. */
-#undef COMMAND_LINE_SIZE
-
-#endif  /*  __KERNEL__  */
-
-#define COMMAND_LINE_SIZE	512
diff --git a/arch/m68knommu/include/asm/shm.h b/arch/m68knommu/include/asm/shm.h
deleted file mode 100644
index cc8e522d9050..000000000000
--- a/arch/m68knommu/include/asm/shm.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/shm.h>
diff --git a/arch/m68knommu/include/asm/shmbuf.h b/arch/m68knommu/include/asm/shmbuf.h
deleted file mode 100644
index bc34cf8eefce..000000000000
--- a/arch/m68knommu/include/asm/shmbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/shmbuf.h>
diff --git a/arch/m68knommu/include/asm/shmparam.h b/arch/m68knommu/include/asm/shmparam.h
deleted file mode 100644
index d7ee69648ebf..000000000000
--- a/arch/m68knommu/include/asm/shmparam.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/shmparam.h>
diff --git a/arch/m68knommu/include/asm/sigcontext.h b/arch/m68knommu/include/asm/sigcontext.h
deleted file mode 100644
index 36c293fc133d..000000000000
--- a/arch/m68knommu/include/asm/sigcontext.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef _ASM_M68KNOMMU_SIGCONTEXT_H
-#define _ASM_M68KNOMMU_SIGCONTEXT_H
-
-struct sigcontext {
-	unsigned long  sc_mask; 	/* old sigmask */
-	unsigned long  sc_usp;		/* old user stack pointer */
-	unsigned long  sc_d0;
-	unsigned long  sc_d1;
-	unsigned long  sc_a0;
-	unsigned long  sc_a1;
-	unsigned long  sc_a5;
-	unsigned short sc_sr;
-	unsigned long  sc_pc;
-	unsigned short sc_formatvec;
-};
-
-#endif
diff --git a/arch/m68knommu/include/asm/siginfo.h b/arch/m68knommu/include/asm/siginfo.h
deleted file mode 100644
index b18e5f4064ae..000000000000
--- a/arch/m68knommu/include/asm/siginfo.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _M68KNOMMU_SIGINFO_H
-#define _M68KNOMMU_SIGINFO_H
-
-#include <asm-generic/siginfo.h>
-
-#endif
diff --git a/arch/m68knommu/include/asm/signal.h b/arch/m68knommu/include/asm/signal.h
deleted file mode 100644
index 216c08be54a0..000000000000
--- a/arch/m68knommu/include/asm/signal.h
+++ /dev/null
@@ -1,159 +0,0 @@
-#ifndef _M68KNOMMU_SIGNAL_H
-#define _M68KNOMMU_SIGNAL_H
-
-#include <linux/types.h>
-
-/* Avoid too many header ordering problems.  */
-struct siginfo;
-
-#ifdef __KERNEL__
-/* Most things should be clean enough to redefine this at will, if care
-   is taken to make libc match.  */
-
-#define _NSIG		64
-#define _NSIG_BPW	32
-#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t;		/* at least 32 bits */
-
-typedef struct {
-	unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-#define NSIG		32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-#define SIGHUP		 1
-#define SIGINT		 2
-#define SIGQUIT		 3
-#define SIGILL		 4
-#define SIGTRAP		 5
-#define SIGABRT		 6
-#define SIGIOT		 6
-#define SIGBUS		 7
-#define SIGFPE		 8
-#define SIGKILL		 9
-#define SIGUSR1		10
-#define SIGSEGV		11
-#define SIGUSR2		12
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGSTKFLT	16
-#define SIGCHLD		17
-#define SIGCONT		18
-#define SIGSTOP		19
-#define SIGTSTP		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGURG		23
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGIO		29
-#define SIGPOLL		SIGIO
-/*
-#define SIGLOST		29
-*/
-#define SIGPWR		30
-#define SIGSYS		31
-#define	SIGUNUSED	31
-
-/* These should not be considered constants from userland.  */
-#define SIGRTMIN	32
-#define SIGRTMAX	_NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP	0x00000001
-#define SA_NOCLDWAIT	0x00000002
-#define SA_SIGINFO	0x00000004
-#define SA_ONSTACK	0x08000000
-#define SA_RESTART	0x10000000
-#define SA_NODEFER	0x40000000
-#define SA_RESETHAND	0x80000000
-
-#define SA_NOMASK	SA_NODEFER
-#define SA_ONESHOT	SA_RESETHAND
-
-/* 
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-#define MINSIGSTKSZ	2048
-#define SIGSTKSZ	8192
-
-#include <asm-generic/signal.h>
-
-#ifdef __KERNEL__
-struct old_sigaction {
-	__sighandler_t sa_handler;
-	old_sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-struct sigaction {
-	__sighandler_t sa_handler;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-	sigset_t sa_mask;		/* mask last for extensibility */
-};
-
-struct k_sigaction {
-	struct sigaction sa;
-};
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-struct sigaction {
-	union {
-	  __sighandler_t _sa_handler;
-	  void (*_sa_sigaction)(int, struct siginfo *, void *);
-	} _u;
-	sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-#define sa_handler	_u._sa_handler
-#define sa_sigaction	_u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
-	void *ss_sp;
-	int ss_flags;
-	size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-
-#include <asm/sigcontext.h>
-#undef __HAVE_ARCH_SIG_BITOPS
-
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#endif /* __KERNEL__ */
-
-#endif /* _M68KNOMMU_SIGNAL_H */
diff --git a/arch/m68knommu/include/asm/smp.h b/arch/m68knommu/include/asm/smp.h
deleted file mode 100644
index 9e9bd7e58922..000000000000
--- a/arch/m68knommu/include/asm/smp.h
+++ /dev/null
@@ -1 +0,0 @@
-/* nothing required here yet */
diff --git a/arch/m68knommu/include/asm/socket.h b/arch/m68knommu/include/asm/socket.h
deleted file mode 100644
index ac5478bf6371..000000000000
--- a/arch/m68knommu/include/asm/socket.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/socket.h>
diff --git a/arch/m68knommu/include/asm/sockios.h b/arch/m68knommu/include/asm/sockios.h
deleted file mode 100644
index dcc6a8900ce2..000000000000
--- a/arch/m68knommu/include/asm/sockios.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/sockios.h>
diff --git a/arch/m68knommu/include/asm/spinlock.h b/arch/m68knommu/include/asm/spinlock.h
deleted file mode 100644
index 6bb1f06c4781..000000000000
--- a/arch/m68knommu/include/asm/spinlock.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/spinlock.h>
diff --git a/arch/m68knommu/include/asm/stat.h b/arch/m68knommu/include/asm/stat.h
deleted file mode 100644
index 3d4b260e7c03..000000000000
--- a/arch/m68knommu/include/asm/stat.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/stat.h>
diff --git a/arch/m68knommu/include/asm/statfs.h b/arch/m68knommu/include/asm/statfs.h
deleted file mode 100644
index 2ce99eaf0970..000000000000
--- a/arch/m68knommu/include/asm/statfs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/statfs.h>
diff --git a/arch/m68knommu/include/asm/string.h b/arch/m68knommu/include/asm/string.h
deleted file mode 100644
index af09e17000fc..000000000000
--- a/arch/m68knommu/include/asm/string.h
+++ /dev/null
@@ -1,126 +0,0 @@
-#ifndef _M68KNOMMU_STRING_H_
-#define _M68KNOMMU_STRING_H_
-
-#ifdef __KERNEL__ /* only set these up for kernel code */
-
-#include <asm/setup.h>
-#include <asm/page.h>
-
-#define __HAVE_ARCH_STRCPY
-static inline char * strcpy(char * dest,const char *src)
-{
-  char *xdest = dest;
-
-  __asm__ __volatile__
-       ("1:\tmoveb %1@+,%0@+\n\t"
-        "jne 1b"
-	: "=a" (dest), "=a" (src)
-        : "0" (dest), "1" (src) : "memory");
-  return xdest;
-}
-
-#define __HAVE_ARCH_STRNCPY
-static inline char * strncpy(char *dest, const char *src, size_t n)
-{
-  char *xdest = dest;
-
-  if (n == 0)
-    return xdest;
-
-  __asm__ __volatile__
-       ("1:\tmoveb %1@+,%0@+\n\t"
-	"jeq 2f\n\t"
-        "subql #1,%2\n\t"
-        "jne 1b\n\t"
-        "2:"
-        : "=a" (dest), "=a" (src), "=d" (n)
-        : "0" (dest), "1" (src), "2" (n)
-        : "memory");
-  return xdest;
-}
-
-
-#ifndef CONFIG_COLDFIRE
-
-#define __HAVE_ARCH_STRCMP
-static inline int strcmp(const char * cs,const char * ct)
-{
-  char __res;
-
-  __asm__
-       ("1:\tmoveb %0@+,%2\n\t" /* get *cs */
-        "cmpb %1@+,%2\n\t"      /* compare a byte */
-        "jne  2f\n\t"           /* not equal, break out */
-        "tstb %2\n\t"           /* at end of cs? */
-        "jne  1b\n\t"           /* no, keep going */
-        "jra  3f\n\t"		/* strings are equal */
-        "2:\tsubb %1@-,%2\n\t"  /* *cs - *ct */
-        "3:"
-        : "=a" (cs), "=a" (ct), "=d" (__res)
-        : "0" (cs), "1" (ct));
-
-  return __res;
-}
-
-#define __HAVE_ARCH_STRNCMP
-static inline int strncmp(const char * cs,const char * ct,size_t count)
-{
-  char __res;
-
-  if (!count)
-    return 0;
-  __asm__
-       ("1:\tmovb %0@+,%3\n\t"          /* get *cs */
-        "cmpb   %1@+,%3\n\t"            /* compare a byte */
-        "jne    3f\n\t"                 /* not equal, break out */
-        "tstb   %3\n\t"                 /* at end of cs? */
-        "jeq    4f\n\t"                 /* yes, all done */
-        "subql  #1,%2\n\t"              /* no, adjust count */
-        "jne    1b\n\t"                 /* more to do, keep going */
-        "2:\tmoveq #0,%3\n\t"           /* strings are equal */
-        "jra    4f\n\t"
-        "3:\tsubb %1@-,%3\n\t"          /* *cs - *ct */
-        "4:"
-        : "=a" (cs), "=a" (ct), "=d" (count), "=d" (__res)
-        : "0" (cs), "1" (ct), "2" (count));
-  return __res;
-}
-
-#endif /* CONFIG_COLDFIRE */
-
-#define __HAVE_ARCH_MEMSET
-extern void * memset(void * s, int c, size_t count);
-
-#define __HAVE_ARCH_MEMCPY
-extern void * memcpy(void *d, const void *s, size_t count);
-
-#else /* KERNEL */
-
-/*
- *	let user libraries deal with these,
- *	IMHO the kernel has no place defining these functions for user apps
- */
-
-#define __HAVE_ARCH_STRCPY 1
-#define __HAVE_ARCH_STRNCPY 1
-#define __HAVE_ARCH_STRCAT 1
-#define __HAVE_ARCH_STRNCAT 1
-#define __HAVE_ARCH_STRCMP 1
-#define __HAVE_ARCH_STRNCMP 1
-#define __HAVE_ARCH_STRNICMP 1
-#define __HAVE_ARCH_STRCHR 1
-#define __HAVE_ARCH_STRRCHR 1
-#define __HAVE_ARCH_STRSTR 1
-#define __HAVE_ARCH_STRLEN 1
-#define __HAVE_ARCH_STRNLEN 1
-#define __HAVE_ARCH_MEMSET 1
-#define __HAVE_ARCH_MEMCPY 1
-#define __HAVE_ARCH_MEMMOVE 1
-#define __HAVE_ARCH_MEMSCAN 1
-#define __HAVE_ARCH_MEMCMP 1
-#define __HAVE_ARCH_MEMCHR 1
-#define __HAVE_ARCH_STRTOK 1
-
-#endif /* KERNEL */
-
-#endif /* _M68K_STRING_H_ */
diff --git a/arch/m68knommu/include/asm/swab.h b/arch/m68knommu/include/asm/swab.h
deleted file mode 100644
index e582257db300..000000000000
--- a/arch/m68knommu/include/asm/swab.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _M68KNOMMU_SWAB_H
-#define _M68KNOMMU_SWAB_H
-
-#include <linux/types.h>
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-#  define __SWAB_64_THRU_32__
-#endif
-
-#if defined (__mcfisaaplus__) || defined (__mcfisac__)
-static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
-{
-	asm(
-			"byterev %0"
-			: "=d" (val)
-			: "0" (val)
-	   );
-	return val;
-}
-
-#define __arch_swab32 __arch_swab32
-#endif
-
-#endif /* _M68KNOMMU_SWAB_H */
diff --git a/arch/m68knommu/include/asm/system.h b/arch/m68knommu/include/asm/system.h
deleted file mode 100644
index 40f49de69821..000000000000
--- a/arch/m68knommu/include/asm/system.h
+++ /dev/null
@@ -1,324 +0,0 @@
-#ifndef _M68KNOMMU_SYSTEM_H
-#define _M68KNOMMU_SYSTEM_H
-
-#include <linux/linkage.h>
-#include <asm/segment.h>
-#include <asm/entry.h>
-
-/*
- * switch_to(n) should switch tasks to task ptr, first checking that
- * ptr isn't the current task, in which case it does nothing.  This
- * also clears the TS-flag if the task we switched to has used the
- * math co-processor latest.
- */
-/*
- * switch_to() saves the extra registers, that are not saved
- * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and
- * a0-a1. Some of these are used by schedule() and its predecessors
- * and so we might get see unexpected behaviors when a task returns
- * with unexpected register values.
- *
- * syscall stores these registers itself and none of them are used
- * by syscall after the function in the syscall has been called.
- *
- * Beware that resume now expects *next to be in d1 and the offset of
- * tss to be in a1. This saves a few instructions as we no longer have
- * to push them onto the stack and read them back right after.
- *
- * 02/17/96 - Jes Sorensen (jds@kom.auc.dk)
- *
- * Changed 96/09/19 by Andreas Schwab
- * pass prev in a0, next in a1, offset of tss in d1, and whether
- * the mm structures are shared in d2 (to avoid atc flushing).
- */
-asmlinkage void resume(void);
-#define switch_to(prev,next,last)				\
-{								\
-  void *_last;							\
-  __asm__ __volatile__(						\
-  	"movel	%1, %%a0\n\t"					\
-	"movel	%2, %%a1\n\t"					\
-	"jbsr resume\n\t"					\
-	"movel	%%d1, %0\n\t"					\
-       : "=d" (_last)						\
-       : "d" (prev), "d" (next)					\
-       : "cc", "d0", "d1", "d2", "d3", "d4", "d5", "a0", "a1");	\
-  (last) = _last;						\
-}
-
-#ifdef CONFIG_COLDFIRE
-#define local_irq_enable() __asm__ __volatile__ (		\
-	"move %/sr,%%d0\n\t"					\
-	"andi.l #0xf8ff,%%d0\n\t"				\
-	"move %%d0,%/sr\n"					\
-	: /* no outputs */					\
-	:							\
-        : "cc", "%d0", "memory")
-#define local_irq_disable() __asm__ __volatile__ (		\
-	"move %/sr,%%d0\n\t"					\
-	"ori.l #0x0700,%%d0\n\t"				\
-	"move %%d0,%/sr\n"					\
-	: /* no outputs */					\
-	:							\
-	: "cc", "%d0", "memory")
-/* For spinlocks etc */
-#define local_irq_save(x) __asm__ __volatile__ (		\
-	"movew %%sr,%0\n\t"					\
-	"movew #0x0700,%%d0\n\t"				\
-	"or.l  %0,%%d0\n\t"					\
-	"movew %%d0,%/sr"					\
-	: "=d" (x)						\
-	:							\
-	: "cc", "%d0", "memory")
-#else
-
-/* portable version */ /* FIXME - see entry.h*/
-#define ALLOWINT 0xf8ff
-
-#define local_irq_enable() asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory")
-#define local_irq_disable() asm volatile ("oriw  #0x0700,%%sr": : : "memory")
-#endif
-
-#define local_save_flags(x) asm volatile ("movew %%sr,%0":"=d" (x) : : "memory")
-#define local_irq_restore(x) asm volatile ("movew %0,%%sr": :"d" (x) : "memory")
-
-/* For spinlocks etc */
-#ifndef local_irq_save
-#define local_irq_save(x) do { local_save_flags(x); local_irq_disable(); } while (0)
-#endif
-
-#define	irqs_disabled()			\
-({					\
-	unsigned long flags;		\
-	local_save_flags(flags);	\
-	((flags & 0x0700) == 0x0700);	\
-})
-
-#define iret() __asm__ __volatile__ ("rte": : :"memory", "sp", "cc")
-
-/*
- * Force strict CPU ordering.
- * Not really required on m68k...
- */
-#define nop()  asm volatile ("nop"::)
-#define mb()   asm volatile (""   : : :"memory")
-#define rmb()  asm volatile (""   : : :"memory")
-#define wmb()  asm volatile (""   : : :"memory")
-#define set_mb(var, value)	({ (var) = (value); wmb(); })
-
-#ifdef CONFIG_SMP
-#define smp_mb()	mb()
-#define smp_rmb()	rmb()
-#define smp_wmb()	wmb()
-#define smp_read_barrier_depends()	read_barrier_depends()
-#else
-#define smp_mb()	barrier()
-#define smp_rmb()	barrier()
-#define smp_wmb()	barrier()
-#define smp_read_barrier_depends()	do { } while(0)
-#endif
-
-#define read_barrier_depends()  ((void)0)
-
-#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
-
-struct __xchg_dummy { unsigned long a[100]; };
-#define __xg(x) ((volatile struct __xchg_dummy *)(x))
-
-#ifndef CONFIG_RMW_INSNS
-static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
-{
-  unsigned long tmp, flags;
-
-  local_irq_save(flags);
-
-  switch (size) {
-  case 1:
-    __asm__ __volatile__
-    ("moveb %2,%0\n\t"
-     "moveb %1,%2"
-    : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
-    break;
-  case 2:
-    __asm__ __volatile__
-    ("movew %2,%0\n\t"
-     "movew %1,%2"
-    : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
-    break;
-  case 4:
-    __asm__ __volatile__
-    ("movel %2,%0\n\t"
-     "movel %1,%2"
-    : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
-    break;
-  }
-  local_irq_restore(flags);
-  return tmp;
-}
-#else
-static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
-{
-	switch (size) {
-	    case 1:
-		__asm__ __volatile__
-			("moveb %2,%0\n\t"
-			 "1:\n\t"
-			 "casb %0,%1,%2\n\t"
-			 "jne 1b"
-			 : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
-		break;
-	    case 2:
-		__asm__ __volatile__
-			("movew %2,%0\n\t"
-			 "1:\n\t"
-			 "casw %0,%1,%2\n\t"
-			 "jne 1b"
-			 : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
-		break;
-	    case 4:
-		__asm__ __volatile__
-			("movel %2,%0\n\t"
-			 "1:\n\t"
-			 "casl %0,%1,%2\n\t"
-			 "jne 1b"
-			 : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
-		break;
-	}
-	return x;
-}
-#endif
-
-#include <asm-generic/cmpxchg-local.h>
-
-/*
- * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
- * them available.
- */
-#define cmpxchg_local(ptr, o, n)				  	       \
-	((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
-			(unsigned long)(n), sizeof(*(ptr))))
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-
-#ifndef CONFIG_SMP
-#include <asm-generic/cmpxchg.h>
-#endif
-
-#if defined( CONFIG_M68328 ) || defined( CONFIG_M68EZ328 ) || \
-	defined (CONFIG_M68360) || defined( CONFIG_M68VZ328 )
-#define HARD_RESET_NOW() ({		\
-        local_irq_disable();		\
-        asm("				\
-        moveal #0x10c00000, %a0;	\
-        moveb #0, 0xFFFFF300;		\
-        moveal 0(%a0), %sp;		\
-        moveal 4(%a0), %a0;		\
-        jmp (%a0);			\
-        ");				\
-})
-#endif
-
-#ifdef CONFIG_COLDFIRE
-#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
-/*
- * Need to account for broken early mask of 5272 silicon. So don't
- * jump through the original start address. Jump strait into the
- * known start of the FLASH code.
- */
-#define HARD_RESET_NOW() ({		\
-        asm("				\
-	movew #0x2700, %sr;		\
-        jmp 0xf0000400;			\
-        ");				\
-})
-#elif defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \
-      defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
-#define HARD_RESET_NOW() ({		\
-        asm("				\
-	movew #0x2700, %sr;		\
-	moveal #0x10000044, %a0;	\
-	movel #0xffffffff, (%a0);	\
-	moveal #0x10000001, %a0;	\
-	moveb #0x00, (%a0);		\
-        moveal #0xf0000004, %a0;	\
-        moveal (%a0), %a0;		\
-        jmp (%a0);			\
-        ");				\
-})
-#elif defined(CONFIG_M5272)
-/*
- * Retrieve the boot address in flash using CSBR0 and CSOR0
- * find the reset vector at flash_address + 4 (e.g. 0x400)
- * remap it in the flash's current location (e.g. 0xf0000400)
- * and jump there.
- */ 
-#define HARD_RESET_NOW() ({		\
-	asm("				\
-	movew #0x2700, %%sr;		\
-	move.l	%0+0x40,%%d0;		\
-	and.l	%0+0x44,%%d0;		\
-	andi.l	#0xfffff000,%%d0;	\
-	mov.l	%%d0,%%a0;		\
-	or.l	4(%%a0),%%d0;		\
-	mov.l	%%d0,%%a0;		\
-	jmp (%%a0);"			\
-	: /* No output */		\
-	: "o" (*(char *)MCF_MBAR) );	\
-})
-#elif defined(CONFIG_M528x)
-/*
- * The MCF528x has a bit (SOFTRST) in memory (Reset Control Register RCR),
- * that when set, resets the MCF528x.
- */
-#define HARD_RESET_NOW() \
-({						\
-	unsigned char volatile *reset;		\
-	asm("move.w	#0x2700, %sr");		\
-	reset = ((volatile unsigned char *)(MCF_IPSBAR + 0x110000));	\
-	while(1)				\
-	*reset |= (0x01 << 7);\
-})
-#elif defined(CONFIG_M523x)
-#define HARD_RESET_NOW() ({		\
-	asm("				\
-	movew #0x2700, %sr;		\
-	movel #0x01000000, %sp;		\
-	moveal #0x40110000, %a0;	\
-	moveb #0x80, (%a0);		\
-	");				\
-})
-#elif defined(CONFIG_M520x)
-	/*
-	 * The MCF5208 has a bit (SOFTRST) in memory (Reset Control Register 
-	 * RCR), that when set, resets the MCF5208.
-	 */
-#define HARD_RESET_NOW() 		\
-({					\
-	unsigned char volatile *reset;	\
-	asm("move.w     #0x2700, %sr");	\
-	reset = ((volatile unsigned char *)(MCF_IPSBAR + 0xA0000));	\
-	while(1)			\
-		*reset |= 0x80;		\
-})
-#else
-#define HARD_RESET_NOW() ({		\
-        asm("				\
-	movew #0x2700, %sr;		\
-        moveal #0x4, %a0;		\
-        moveal (%a0), %a0;		\
-        jmp (%a0);			\
-        ");				\
-})
-#endif
-#endif
-#define arch_align_stack(x) (x)
-
-
-static inline int irqs_disabled_flags(unsigned long flags)
-{
-	if (flags & 0x0700)
-		return 0;
-	else
-		return 1;
-}
-
-#endif /* _M68KNOMMU_SYSTEM_H */
diff --git a/arch/m68knommu/include/asm/termbits.h b/arch/m68knommu/include/asm/termbits.h
deleted file mode 100644
index 05dd6bc27285..000000000000
--- a/arch/m68knommu/include/asm/termbits.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/termbits.h>
diff --git a/arch/m68knommu/include/asm/termios.h b/arch/m68knommu/include/asm/termios.h
deleted file mode 100644
index e7337881a985..000000000000
--- a/arch/m68knommu/include/asm/termios.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/termios.h>
diff --git a/arch/m68knommu/include/asm/thread_info.h b/arch/m68knommu/include/asm/thread_info.h
deleted file mode 100644
index 82529f424ea3..000000000000
--- a/arch/m68knommu/include/asm/thread_info.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/* thread_info.h: m68knommu low-level thread information
- * adapted from the i386 and PPC versions by Greg Ungerer (gerg@snapgear.com)
- *
- * Copyright (C) 2002  David Howells (dhowells@redhat.com)
- * - Incorporating suggestions made by Linus Torvalds and Dave Miller
- */
-
-#ifndef _ASM_THREAD_INFO_H
-#define _ASM_THREAD_INFO_H
-
-#include <asm/page.h>
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-
-/*
- * Size of kernel stack for each process. This must be a power of 2...
- */
-#ifdef CONFIG_4KSTACKS
-#define THREAD_SIZE_ORDER (0)
-#else
-#define THREAD_SIZE_ORDER (1)
-#endif
-                                                                                
-/*
- * for asm files, THREAD_SIZE is now generated by asm-offsets.c
- */
-#define THREAD_SIZE (PAGE_SIZE<<THREAD_SIZE_ORDER)
-
-/*
- * low level task data.
- */
-struct thread_info {
-	struct task_struct *task;		/* main task structure */
-	struct exec_domain *exec_domain;	/* execution domain */
-	unsigned long	   flags;		/* low level flags */
-	int		   cpu;			/* cpu we're on */
-	int		   preempt_count;	/* 0 => preemptable, <0 => BUG */
-	struct restart_block restart_block;
-};
-
-/*
- * macros/functions for gaining access to the thread information structure
- */
-#define INIT_THREAD_INFO(tsk)			\
-{						\
-	.task		= &tsk,			\
-	.exec_domain	= &default_exec_domain,	\
-	.flags		= 0,			\
-	.cpu		= 0,			\
-	.restart_block	= {			\
-		.fn = do_no_restart_syscall,	\
-	},					\
-}
-
-#define init_thread_info	(init_thread_union.thread_info)
-#define init_stack		(init_thread_union.stack)
-
-
-/* how to get the thread information struct from C */
-static inline struct thread_info *current_thread_info(void)
-{
-	struct thread_info *ti;
-	__asm__(
-		"move.l	%%sp, %0 \n\t"
-		"and.l	%1, %0"
-		: "=&d"(ti)
-		: "di" (~(THREAD_SIZE-1))
-		);
-	return ti;
-}
-
-#endif /* __ASSEMBLY__ */
-
-#define	PREEMPT_ACTIVE	0x4000000
-
-/*
- * thread information flag bit numbers
- */
-#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
-#define TIF_SIGPENDING		1	/* signal pending */
-#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
-#define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling
-					   TIF_NEED_RESCHED */
-#define TIF_MEMDIE		4
-#define TIF_FREEZE		16	/* is freezing for suspend */
-
-/* as above, but as bit values */
-#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
-#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
-#define _TIF_FREEZE		(1<<TIF_FREEZE)
-
-#define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/m68knommu/include/asm/timex.h b/arch/m68knommu/include/asm/timex.h
deleted file mode 100644
index 109050f3fe91..000000000000
--- a/arch/m68knommu/include/asm/timex.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/include/asm-m68knommu/timex.h
- *
- * m68knommu architecture timex specifications
- */
-#ifndef _ASM_M68KNOMMU_TIMEX_H
-#define _ASM_M68KNOMMU_TIMEX_H
-
-#ifdef CONFIG_COLDFIRE
-#include <asm/coldfire.h>
-#define CLOCK_TICK_RATE	MCF_CLK
-#else
-#define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
-#endif
-
-typedef unsigned long cycles_t;
-
-static inline cycles_t get_cycles(void)
-{
-	return 0;
-}
-
-#endif
diff --git a/arch/m68knommu/include/asm/tlb.h b/arch/m68knommu/include/asm/tlb.h
deleted file mode 100644
index 77a7c51ca299..000000000000
--- a/arch/m68knommu/include/asm/tlb.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/tlb.h>
diff --git a/arch/m68knommu/include/asm/tlbflush.h b/arch/m68knommu/include/asm/tlbflush.h
deleted file mode 100644
index a470cfb803eb..000000000000
--- a/arch/m68knommu/include/asm/tlbflush.h
+++ /dev/null
@@ -1,55 +0,0 @@
-#ifndef _M68KNOMMU_TLBFLUSH_H
-#define _M68KNOMMU_TLBFLUSH_H
-
-/*
- * Copyright (C) 2000 Lineo, David McCullough <davidm@uclinux.org>
- * Copyright (C) 2000-2002, Greg Ungerer <gerg@snapgear.com>
- */
-
-#include <asm/setup.h>
-
-/*
- * flush all user-space atc entries.
- */
-static inline void __flush_tlb(void)
-{
-	BUG();
-}
-
-static inline void __flush_tlb_one(unsigned long addr)
-{
-	BUG();
-}
-
-#define flush_tlb() __flush_tlb()
-
-/*
- * flush all atc entries (both kernel and user-space entries).
- */
-static inline void flush_tlb_all(void)
-{
-	BUG();
-}
-
-static inline void flush_tlb_mm(struct mm_struct *mm)
-{
-	BUG();
-}
-
-static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
-{
-	BUG();
-}
-
-static inline void flush_tlb_range(struct mm_struct *mm,
-				   unsigned long start, unsigned long end)
-{
-	BUG();
-}
-
-static inline void flush_tlb_kernel_page(unsigned long addr)
-{
-	BUG();
-}
-
-#endif /* _M68KNOMMU_TLBFLUSH_H */
diff --git a/arch/m68knommu/include/asm/topology.h b/arch/m68knommu/include/asm/topology.h
deleted file mode 100644
index ca173e9f26ff..000000000000
--- a/arch/m68knommu/include/asm/topology.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_M68K_TOPOLOGY_H
-#define _ASM_M68K_TOPOLOGY_H
-
-#include <asm-generic/topology.h>
-
-#endif /* _ASM_M68K_TOPOLOGY_H */
diff --git a/arch/m68knommu/include/asm/traps.h b/arch/m68knommu/include/asm/traps.h
deleted file mode 100644
index d0671e5f8e29..000000000000
--- a/arch/m68knommu/include/asm/traps.h
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- *  linux/include/asm/traps.h
- *
- *  Copyright (C) 1993        Hamish Macdonald
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#ifndef _M68KNOMMU_TRAPS_H
-#define _M68KNOMMU_TRAPS_H
-
-#ifndef __ASSEMBLY__
-
-typedef void (*e_vector)(void);
-
-extern e_vector vectors[];
-extern void init_vectors(void);
-extern void enable_vector(unsigned int irq);
-extern void disable_vector(unsigned int irq);
-extern void ack_vector(unsigned int irq);
-
-#endif
-
-#define VEC_BUSERR  (2)
-#define VEC_ADDRERR (3)
-#define VEC_ILLEGAL (4)
-#define VEC_ZERODIV (5)
-#define VEC_CHK     (6)
-#define VEC_TRAP    (7)
-#define VEC_PRIV    (8)
-#define VEC_TRACE   (9)
-#define VEC_LINE10  (10)
-#define VEC_LINE11  (11)
-#define VEC_RESV1   (12)
-#define VEC_COPROC  (13)
-#define VEC_FORMAT  (14)
-#define VEC_UNINT   (15)
-#define VEC_SPUR    (24)
-#define VEC_INT1    (25)
-#define VEC_INT2    (26)
-#define VEC_INT3    (27)
-#define VEC_INT4    (28)
-#define VEC_INT5    (29)
-#define VEC_INT6    (30)
-#define VEC_INT7    (31)
-#define VEC_SYS     (32)
-#define VEC_TRAP1   (33)
-#define VEC_TRAP2   (34)
-#define VEC_TRAP3   (35)
-#define VEC_TRAP4   (36)
-#define VEC_TRAP5   (37)
-#define VEC_TRAP6   (38)
-#define VEC_TRAP7   (39)
-#define VEC_TRAP8   (40)
-#define VEC_TRAP9   (41)
-#define VEC_TRAP10  (42)
-#define VEC_TRAP11  (43)
-#define VEC_TRAP12  (44)
-#define VEC_TRAP13  (45)
-#define VEC_TRAP14  (46)
-#define VEC_TRAP15  (47)
-#define VEC_FPBRUC  (48)
-#define VEC_FPIR    (49)
-#define VEC_FPDIVZ  (50)
-#define VEC_FPUNDER (51)
-#define VEC_FPOE    (52)
-#define VEC_FPOVER  (53)
-#define VEC_FPNAN   (54)
-#define VEC_FPUNSUP (55)
-#define	VEC_UNIMPEA (60)
-#define	VEC_UNIMPII (61)
-#define VEC_USER    (64)
-
-#define VECOFF(vec) ((vec)<<2)
-
-#ifndef __ASSEMBLY__
-
-/* Status register bits */
-#define PS_T  (0x8000)
-#define PS_S  (0x2000)
-#define PS_M  (0x1000)
-#define PS_C  (0x0001)
-
-/* structure for stack frames */
-
-struct frame {
-    struct pt_regs ptregs;
-    union {
-	    struct {
-		    unsigned long  iaddr;    /* instruction address */
-	    } fmt2;
-	    struct {
-		    unsigned long  effaddr;  /* effective address */
-	    } fmt3;
-	    struct {
-		    unsigned long  effaddr;  /* effective address */
-		    unsigned long  pc;	     /* pc of faulted instr */
-	    } fmt4;
-	    struct {
-		    unsigned long  effaddr;  /* effective address */
-		    unsigned short ssw;      /* special status word */
-		    unsigned short wb3s;     /* write back 3 status */
-		    unsigned short wb2s;     /* write back 2 status */
-		    unsigned short wb1s;     /* write back 1 status */
-		    unsigned long  faddr;    /* fault address */
-		    unsigned long  wb3a;     /* write back 3 address */
-		    unsigned long  wb3d;     /* write back 3 data */
-		    unsigned long  wb2a;     /* write back 2 address */
-		    unsigned long  wb2d;     /* write back 2 data */
-		    unsigned long  wb1a;     /* write back 1 address */
-		    unsigned long  wb1dpd0;  /* write back 1 data/push data 0*/
-		    unsigned long  pd1;      /* push data 1*/
-		    unsigned long  pd2;      /* push data 2*/
-		    unsigned long  pd3;      /* push data 3*/
-	    } fmt7;
-	    struct {
-		    unsigned long  iaddr;    /* instruction address */
-		    unsigned short int1[4];  /* internal registers */
-	    } fmt9;
-	    struct {
-		    unsigned short int1;
-		    unsigned short ssw;      /* special status word */
-		    unsigned short isc;      /* instruction stage c */
-		    unsigned short isb;      /* instruction stage b */
-		    unsigned long  daddr;    /* data cycle fault address */
-		    unsigned short int2[2];
-		    unsigned long  dobuf;    /* data cycle output buffer */
-		    unsigned short int3[2];
-	    } fmta;
-	    struct {
-		    unsigned short int1;
-		    unsigned short ssw;     /* special status word */
-		    unsigned short isc;     /* instruction stage c */
-		    unsigned short isb;     /* instruction stage b */
-		    unsigned long  daddr;   /* data cycle fault address */
-		    unsigned short int2[2];
-		    unsigned long  dobuf;   /* data cycle output buffer */
-		    unsigned short int3[4];
-		    unsigned long  baddr;   /* stage B address */
-		    unsigned short int4[2];
-		    unsigned long  dibuf;   /* data cycle input buffer */
-		    unsigned short int5[3];
-		    unsigned	   ver : 4; /* stack frame version # */
-		    unsigned	   int6:12;
-		    unsigned short int7[18];
-	    } fmtb;
-    } un;
-};
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _M68KNOMMU_TRAPS_H */
diff --git a/arch/m68knommu/include/asm/types.h b/arch/m68knommu/include/asm/types.h
deleted file mode 100644
index 031238c2d180..000000000000
--- a/arch/m68knommu/include/asm/types.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/types.h>
diff --git a/arch/m68knommu/include/asm/uaccess.h b/arch/m68knommu/include/asm/uaccess.h
deleted file mode 100644
index 68bbe9b312f1..000000000000
--- a/arch/m68knommu/include/asm/uaccess.h
+++ /dev/null
@@ -1,181 +0,0 @@
-#ifndef __M68KNOMMU_UACCESS_H
-#define __M68KNOMMU_UACCESS_H
-
-/*
- * User space memory access functions
- */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-
-#include <asm/segment.h>
-
-#define VERIFY_READ	0
-#define VERIFY_WRITE	1
-
-#define access_ok(type,addr,size)	_access_ok((unsigned long)(addr),(size))
-
-/*
- * It is not enough to just have access_ok check for a real RAM address.
- * This would disallow the case of code/ro-data running XIP in flash/rom.
- * Ideally we would check the possible flash ranges too, but that is
- * currently not so easy.
- */
-static inline int _access_ok(unsigned long addr, unsigned long size)
-{
-	return 1;
-}
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue.  No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path.  This means when everything is well,
- * we don't even have to jump over them.  Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry
-{
-	unsigned long insn, fixup;
-};
-
-/* Returns 0 if exception not found and fixup otherwise.  */
-extern unsigned long search_exception_table(unsigned long);
-
-
-/*
- * These are the main single-value transfer routines.  They automatically
- * use the right size if we just have the right pointer type.
- */
-
-#define put_user(x, ptr)				\
-({							\
-    int __pu_err = 0;					\
-    typeof(*(ptr)) __pu_val = (x);			\
-    switch (sizeof (*(ptr))) {				\
-    case 1:						\
-	__put_user_asm(__pu_err, __pu_val, ptr, b);	\
-	break;						\
-    case 2:						\
-	__put_user_asm(__pu_err, __pu_val, ptr, w);	\
-	break;						\
-    case 4:						\
-	__put_user_asm(__pu_err, __pu_val, ptr, l);	\
-	break;						\
-    case 8:						\
-	memcpy(ptr, &__pu_val, sizeof (*(ptr))); \
-	break;						\
-    default:						\
-	__pu_err = __put_user_bad();			\
-	break;						\
-    }							\
-    __pu_err;						\
-})
-#define __put_user(x, ptr) put_user(x, ptr)
-
-extern int __put_user_bad(void);
-
-/*
- * Tell gcc we read from memory instead of writing: this is because
- * we do not write to any memory gcc knows about, so there are no
- * aliasing issues.
- */
-
-#define __ptr(x) ((unsigned long *)(x))
-
-#define __put_user_asm(err,x,ptr,bwl)				\
-	__asm__ ("move" #bwl " %0,%1"				\
-		: /* no outputs */						\
-		:"d" (x),"m" (*__ptr(ptr)) : "memory")
-
-#define get_user(x, ptr)					\
-({								\
-    int __gu_err = 0;						\
-    typeof(x) __gu_val = 0;					\
-    switch (sizeof(*(ptr))) {					\
-    case 1:							\
-	__get_user_asm(__gu_err, __gu_val, ptr, b, "=d");	\
-	break;							\
-    case 2:							\
-	__get_user_asm(__gu_err, __gu_val, ptr, w, "=r");	\
-	break;							\
-    case 4:							\
-	__get_user_asm(__gu_err, __gu_val, ptr, l, "=r");	\
-	break;							\
-    case 8:							\
-	memcpy((void *) &__gu_val, ptr, sizeof (*(ptr)));	\
-	break;							\
-    default:							\
-	__gu_val = 0;						\
-	__gu_err = __get_user_bad();				\
-	break;							\
-    }								\
-    (x) = (typeof(*(ptr))) __gu_val;				\
-    __gu_err;							\
-})
-#define __get_user(x, ptr) get_user(x, ptr)
-
-extern int __get_user_bad(void);
-
-#define __get_user_asm(err,x,ptr,bwl,reg)			\
-	__asm__ ("move" #bwl " %1,%0"				\
-		 : "=d" (x)					\
-		 : "m" (*__ptr(ptr)))
-
-#define copy_from_user(to, from, n)		(memcpy(to, from, n), 0)
-#define copy_to_user(to, from, n)		(memcpy(to, from, n), 0)
-
-#define __copy_from_user(to, from, n) copy_from_user(to, from, n)
-#define __copy_to_user(to, from, n) copy_to_user(to, from, n)
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-#define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n)) return retval; })
-
-#define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n)) return retval; })
-
-/*
- * Copy a null terminated string from userspace.
- */
-
-static inline long
-strncpy_from_user(char *dst, const char *src, long count)
-{
-	char *tmp;
-	strncpy(dst, src, count);
-	for (tmp = dst; *tmp && count > 0; tmp++, count--)
-		;
-	return(tmp - dst); /* DAVIDM should we count a NUL ?  check getname */
-}
-
-/*
- * Return the size of a string (including the ending 0)
- *
- * Return 0 on exception, a value greater than N if too long
- */
-static inline long strnlen_user(const char *src, long n)
-{
-	return(strlen(src) + 1); /* DAVIDM make safer */
-}
-
-#define strlen_user(str) strnlen_user(str, 32767)
-
-/*
- * Zero Userspace
- */
-
-static inline unsigned long
-__clear_user(void *to, unsigned long n)
-{
-	memset(to, 0, n);
-	return 0;
-}
-
-#define	clear_user(to,n)	__clear_user(to,n)
-
-#endif /* _M68KNOMMU_UACCESS_H */
diff --git a/arch/m68knommu/include/asm/ucontext.h b/arch/m68knommu/include/asm/ucontext.h
deleted file mode 100644
index 713a27f901cd..000000000000
--- a/arch/m68knommu/include/asm/ucontext.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef _M68KNOMMU_UCONTEXT_H
-#define _M68KNOMMU_UCONTEXT_H
-
-typedef int greg_t;
-#define NGREG 18
-typedef greg_t gregset_t[NGREG];
-
-typedef struct fpregset {
-	int f_pcr;
-	int f_psr;
-	int f_fpiaddr;
-	int f_fpregs[8][3];
-} fpregset_t;
-
-struct mcontext {
-	int version;
-	gregset_t gregs;
-	fpregset_t fpregs;
-};
-
-#define MCONTEXT_VERSION 2
-
-struct ucontext {
-	unsigned long	  uc_flags;
-	struct ucontext  *uc_link;
-	stack_t		  uc_stack;
-	struct mcontext	  uc_mcontext;
-	unsigned long	  uc_filler[80];
-	sigset_t	  uc_sigmask;	/* mask last for extensibility */
-};
-
-#endif
diff --git a/arch/m68knommu/include/asm/unaligned.h b/arch/m68knommu/include/asm/unaligned.h
deleted file mode 100644
index eb1ea4cb9a59..000000000000
--- a/arch/m68knommu/include/asm/unaligned.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _ASM_M68KNOMMU_UNALIGNED_H
-#define _ASM_M68KNOMMU_UNALIGNED_H
-
-
-#ifdef CONFIG_COLDFIRE
-#include <linux/unaligned/be_struct.h>
-#include <linux/unaligned/le_byteshift.h>
-#include <linux/unaligned/generic.h>
-
-#define get_unaligned	__get_unaligned_be
-#define put_unaligned	__put_unaligned_be
-
-#else
-/*
- * The m68k can do unaligned accesses itself. 
- */
-#include <linux/unaligned/access_ok.h>
-#include <linux/unaligned/generic.h>
-
-#define get_unaligned	__get_unaligned_be
-#define put_unaligned	__put_unaligned_be
-
-#endif
-
-#endif /* _ASM_M68KNOMMU_UNALIGNED_H */
diff --git a/arch/m68knommu/include/asm/unistd.h b/arch/m68knommu/include/asm/unistd.h
deleted file mode 100644
index b034a2f7b444..000000000000
--- a/arch/m68knommu/include/asm/unistd.h
+++ /dev/null
@@ -1,372 +0,0 @@
-#ifndef _ASM_M68K_UNISTD_H_
-#define _ASM_M68K_UNISTD_H_
-
-/*
- * This file contains the system call numbers.
- */
-
-#define __NR_restart_syscall      0
-#define __NR_exit		  1
-#define __NR_fork		  2
-#define __NR_read		  3
-#define __NR_write		  4
-#define __NR_open		  5
-#define __NR_close		  6
-#define __NR_waitpid		  7
-#define __NR_creat		  8
-#define __NR_link		  9
-#define __NR_unlink		 10
-#define __NR_execve		 11
-#define __NR_chdir		 12
-#define __NR_time		 13
-#define __NR_mknod		 14
-#define __NR_chmod		 15
-#define __NR_chown		 16
-#define __NR_break		 17
-#define __NR_oldstat		 18
-#define __NR_lseek		 19
-#define __NR_getpid		 20
-#define __NR_mount		 21
-#define __NR_umount		 22
-#define __NR_setuid		 23
-#define __NR_getuid		 24
-#define __NR_stime		 25
-#define __NR_ptrace		 26
-#define __NR_alarm		 27
-#define __NR_oldfstat		 28
-#define __NR_pause		 29
-#define __NR_utime		 30
-#define __NR_stty		 31
-#define __NR_gtty		 32
-#define __NR_access		 33
-#define __NR_nice		 34
-#define __NR_ftime		 35
-#define __NR_sync		 36
-#define __NR_kill		 37
-#define __NR_rename		 38
-#define __NR_mkdir		 39
-#define __NR_rmdir		 40
-#define __NR_dup		 41
-#define __NR_pipe		 42
-#define __NR_times		 43
-#define __NR_prof		 44
-#define __NR_brk		 45
-#define __NR_setgid		 46
-#define __NR_getgid		 47
-#define __NR_signal		 48
-#define __NR_geteuid		 49
-#define __NR_getegid		 50
-#define __NR_acct		 51
-#define __NR_umount2		 52
-#define __NR_lock		 53
-#define __NR_ioctl		 54
-#define __NR_fcntl		 55
-#define __NR_mpx		 56
-#define __NR_setpgid		 57
-#define __NR_ulimit		 58
-#define __NR_oldolduname	 59
-#define __NR_umask		 60
-#define __NR_chroot		 61
-#define __NR_ustat		 62
-#define __NR_dup2		 63
-#define __NR_getppid		 64
-#define __NR_getpgrp		 65
-#define __NR_setsid		 66
-#define __NR_sigaction		 67
-#define __NR_sgetmask		 68
-#define __NR_ssetmask		 69
-#define __NR_setreuid		 70
-#define __NR_setregid		 71
-#define __NR_sigsuspend		 72
-#define __NR_sigpending		 73
-#define __NR_sethostname	 74
-#define __NR_setrlimit		 75
-#define __NR_getrlimit		 76
-#define __NR_getrusage		 77
-#define __NR_gettimeofday	 78
-#define __NR_settimeofday	 79
-#define __NR_getgroups		 80
-#define __NR_setgroups		 81
-#define __NR_select		 82
-#define __NR_symlink		 83
-#define __NR_oldlstat		 84
-#define __NR_readlink		 85
-#define __NR_uselib		 86
-#define __NR_swapon		 87
-#define __NR_reboot		 88
-#define __NR_readdir		 89
-#define __NR_mmap		 90
-#define __NR_munmap		 91
-#define __NR_truncate		 92
-#define __NR_ftruncate		 93
-#define __NR_fchmod		 94
-#define __NR_fchown		 95
-#define __NR_getpriority	 96
-#define __NR_setpriority	 97
-#define __NR_profil		 98
-#define __NR_statfs		 99
-#define __NR_fstatfs		100
-#define __NR_ioperm		101
-#define __NR_socketcall		102
-#define __NR_syslog		103
-#define __NR_setitimer		104
-#define __NR_getitimer		105
-#define __NR_stat		106
-#define __NR_lstat		107
-#define __NR_fstat		108
-#define __NR_olduname		109
-#define __NR_iopl		/* 110 */ not supported
-#define __NR_vhangup		111
-#define __NR_idle		/* 112 */ Obsolete
-#define __NR_vm86		/* 113 */ not supported
-#define __NR_wait4		114
-#define __NR_swapoff		115
-#define __NR_sysinfo		116
-#define __NR_ipc		117
-#define __NR_fsync		118
-#define __NR_sigreturn		119
-#define __NR_clone		120
-#define __NR_setdomainname	121
-#define __NR_uname		122
-#define __NR_cacheflush		123
-#define __NR_adjtimex		124
-#define __NR_mprotect		125
-#define __NR_sigprocmask	126
-#define __NR_create_module	127
-#define __NR_init_module	128
-#define __NR_delete_module	129
-#define __NR_get_kernel_syms	130
-#define __NR_quotactl		131
-#define __NR_getpgid		132
-#define __NR_fchdir		133
-#define __NR_bdflush		134
-#define __NR_sysfs		135
-#define __NR_personality	136
-#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
-#define __NR_setfsuid		138
-#define __NR_setfsgid		139
-#define __NR__llseek		140
-#define __NR_getdents		141
-#define __NR__newselect		142
-#define __NR_flock		143
-#define __NR_msync		144
-#define __NR_readv		145
-#define __NR_writev		146
-#define __NR_getsid		147
-#define __NR_fdatasync		148
-#define __NR__sysctl		149
-#define __NR_mlock		150
-#define __NR_munlock		151
-#define __NR_mlockall		152
-#define __NR_munlockall		153
-#define __NR_sched_setparam		154
-#define __NR_sched_getparam		155
-#define __NR_sched_setscheduler		156
-#define __NR_sched_getscheduler		157
-#define __NR_sched_yield		158
-#define __NR_sched_get_priority_max	159
-#define __NR_sched_get_priority_min	160
-#define __NR_sched_rr_get_interval	161
-#define __NR_nanosleep		162
-#define __NR_mremap		163
-#define __NR_setresuid		164
-#define __NR_getresuid		165
-#define __NR_getpagesize	166
-#define __NR_query_module	167
-#define __NR_poll		168
-#define __NR_nfsservctl		169
-#define __NR_setresgid		170
-#define __NR_getresgid		171
-#define __NR_prctl		172
-#define __NR_rt_sigreturn	173
-#define __NR_rt_sigaction	174
-#define __NR_rt_sigprocmask	175
-#define __NR_rt_sigpending	176
-#define __NR_rt_sigtimedwait	177
-#define __NR_rt_sigqueueinfo	178
-#define __NR_rt_sigsuspend	179
-#define __NR_pread64		180
-#define __NR_pwrite64		181
-#define __NR_lchown		182
-#define __NR_getcwd		183
-#define __NR_capget		184
-#define __NR_capset		185
-#define __NR_sigaltstack	186
-#define __NR_sendfile		187
-#define __NR_getpmsg		188	/* some people actually want streams */
-#define __NR_putpmsg		189	/* some people actually want streams */
-#define __NR_vfork		190
-#define __NR_ugetrlimit		191
-#define __NR_mmap2		192
-#define __NR_truncate64		193
-#define __NR_ftruncate64	194
-#define __NR_stat64		195
-#define __NR_lstat64		196
-#define __NR_fstat64		197
-#define __NR_chown32		198
-#define __NR_getuid32		199
-#define __NR_getgid32		200
-#define __NR_geteuid32		201
-#define __NR_getegid32		202
-#define __NR_setreuid32		203
-#define __NR_setregid32		204
-#define __NR_getgroups32	205
-#define __NR_setgroups32	206
-#define __NR_fchown32		207
-#define __NR_setresuid32	208
-#define __NR_getresuid32	209
-#define __NR_setresgid32	210
-#define __NR_getresgid32	211
-#define __NR_lchown32		212
-#define __NR_setuid32		213
-#define __NR_setgid32		214
-#define __NR_setfsuid32		215
-#define __NR_setfsgid32		216
-#define __NR_pivot_root		217
-#define __NR_getdents64		220
-#define __NR_gettid		221
-#define __NR_tkill		222
-#define __NR_setxattr		223
-#define __NR_lsetxattr		224
-#define __NR_fsetxattr		225
-#define __NR_getxattr		226
-#define __NR_lgetxattr		227
-#define __NR_fgetxattr		228
-#define __NR_listxattr		229
-#define __NR_llistxattr		230
-#define __NR_flistxattr		231
-#define __NR_removexattr	232
-#define __NR_lremovexattr	233
-#define __NR_fremovexattr	234
-#define __NR_futex		235
-#define __NR_sendfile64		236
-#define __NR_mincore		237
-#define __NR_madvise		238
-#define __NR_fcntl64		239
-#define __NR_readahead		240
-#define __NR_io_setup		241
-#define __NR_io_destroy		242
-#define __NR_io_getevents	243
-#define __NR_io_submit		244
-#define __NR_io_cancel		245
-#define __NR_fadvise64		246
-#define __NR_exit_group		247
-#define __NR_lookup_dcookie	248
-#define __NR_epoll_create	249
-#define __NR_epoll_ctl		250
-#define __NR_epoll_wait		251
-#define __NR_remap_file_pages	252
-#define __NR_set_tid_address	253
-#define __NR_timer_create	254
-#define __NR_timer_settime	255
-#define __NR_timer_gettime	256
-#define __NR_timer_getoverrun	257
-#define __NR_timer_delete	258
-#define __NR_clock_settime	259
-#define __NR_clock_gettime	260
-#define __NR_clock_getres	261
-#define __NR_clock_nanosleep	262
-#define __NR_statfs64		263
-#define __NR_fstatfs64		264
-#define __NR_tgkill		265
-#define __NR_utimes		266
-#define __NR_fadvise64_64	267
-#define __NR_mbind		268
-#define __NR_get_mempolicy	269
-#define __NR_set_mempolicy	270
-#define __NR_mq_open		271
-#define __NR_mq_unlink		272
-#define __NR_mq_timedsend	273
-#define __NR_mq_timedreceive	274
-#define __NR_mq_notify		275
-#define __NR_mq_getsetattr	276
-#define __NR_waitid		277
-#define __NR_vserver		278
-#define __NR_add_key		279
-#define __NR_request_key	280
-#define __NR_keyctl		281
-#define __NR_ioprio_set		282
-#define __NR_ioprio_get		283
-#define __NR_inotify_init	284
-#define __NR_inotify_add_watch	285
-#define __NR_inotify_rm_watch	286
-#define __NR_migrate_pages	287
-#define __NR_openat		288
-#define __NR_mkdirat		289
-#define __NR_mknodat		290
-#define __NR_fchownat		291
-#define __NR_futimesat		292
-#define __NR_fstatat64		293
-#define __NR_unlinkat		294
-#define __NR_renameat		295
-#define __NR_linkat		296
-#define __NR_symlinkat		297
-#define __NR_readlinkat		298
-#define __NR_fchmodat		299
-#define __NR_faccessat		300
-#define __NR_pselect6		301
-#define __NR_ppoll		302
-#define __NR_unshare		303
-#define __NR_set_robust_list	304
-#define __NR_get_robust_list	305
-#define __NR_splice		306
-#define __NR_sync_file_range	307
-#define __NR_tee		308
-#define __NR_vmsplice		309
-#define __NR_move_pages		310
-#define __NR_sched_setaffinity	311
-#define __NR_sched_getaffinity	312
-#define __NR_kexec_load		313
-#define __NR_getcpu		314
-#define __NR_epoll_pwait	315
-#define __NR_utimensat		316
-#define __NR_signalfd		317
-#define __NR_timerfd_create	318
-#define __NR_eventfd		319
-#define __NR_fallocate		320
-#define __NR_timerfd_settime	321
-#define __NR_timerfd_gettime	322
-#define __NR_signalfd4		323
-#define __NR_eventfd2		324
-#define __NR_epoll_create1	325
-#define __NR_dup3		326
-#define __NR_pipe2		327
-#define __NR_inotify_init1	328
-
-#ifdef __KERNEL__
-
-#define NR_syscalls		329
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_OLD_STAT
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_M68K_UNISTD_H_ */
diff --git a/arch/m68knommu/include/asm/user.h b/arch/m68knommu/include/asm/user.h
deleted file mode 100644
index a5a555b761c4..000000000000
--- a/arch/m68knommu/include/asm/user.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/user.h>