Merge tag 'h8300-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull h8300 platform removal from Guenter Roeck:
 "The patch series has been in -next for more than one relase cycle.  I
  did get a number of Acks, and no objections.

  H8/300 has been dead for several years, the kernel for it has not
  compiled for ages, and recent versions of gcc for it are broken.
  Remove support for it"

* tag 'h8300-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  CREDITS: Add Yoshinori Sato for h8300
  fs/minix: Drop dependency on H8300
  Drop remaining references to H8/300 architecture
  Drop MAINTAINERS entry for H8/300
  watchdog: Drop references to H8300 architecture
  net/ethernet: Drop H8/300 Ethernet driver
  net/ethernet: smsc9194: Drop conditional code for H8/300
  ide: Drop H8/300 driver
  Drop support for Renesas H8/300 (h8300) architecture

1 files changed, 0 insertions, 242 deletions

diff --git a/arch/h8300/kernel/setup.c b/arch/h8300/kernel/setup.c
deleted file mode 100644
index d0b1607f2711..000000000000
--- a/arch/h8300/kernel/setup.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- *  linux/arch/h8300/kernel/setup.c
- *
- *  Copyleft  ()) 2000       James D. Schettine {james@telos-systems.com}
- *  Copyright (C) 1999,2000  Greg Ungerer (gerg@snapgear.com)
- *  Copyright (C) 1998,1999  D. Jeff Dionne <jeff@lineo.ca>
- *  Copyright (C) 1998       Kenneth Albanowski <kjahds@kjahds.com>
- *  Copyright (C) 1995       Hamish Macdonald
- *  Copyright (C) 2000       Lineo Inc. (www.lineo.com) 
- *  Copyright (C) 2001 	     Lineo, Inc. <www.lineo.com>
- *
- *  H8/300 porting Yoshinori Sato <ysato@users.sourceforge.jp>
- */
-
-/*
- * This file handles the architecture-dependent parts of system setup
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/fs.h>
-#include <linux/fb.h>
-#include <linux/console.h>
-#include <linux/genhd.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/major.h>
-#include <linux/bootmem.h>
-#include <linux/seq_file.h>
-#include <linux/init.h>
-
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/sections.h>
-
-#if defined(__H8300H__)
-#define CPU "H8/300H"
-#include <asm/regs306x.h>
-#endif
-
-#if defined(__H8300S__)
-#define CPU "H8S"
-#include <asm/regs267x.h>
-#endif
-
-#define STUBSIZE 0xc000
-
-unsigned long rom_length;
-unsigned long memory_start;
-unsigned long memory_end;
-
-char __initdata command_line[COMMAND_LINE_SIZE];
-
-extern int _ramstart, _ramend;
-extern char _target_name[];
-extern void h8300_gpio_init(void);
-
-#if (defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)) \
-    && defined(CONFIG_GDB_MAGICPRINT)
-/* printk with gdb service */
-static void gdb_console_output(struct console *c, const char *msg, unsigned len)
-{
-	for (; len > 0; len--) {
-		asm("mov.w %0,r2\n\t"
-                    "jsr @0xc4"::"r"(*msg++):"er2");
-	}
-}
-
-/*
- *	Setup initial baud/bits/parity. We do two things here:
- *	- construct a cflag setting for the first rs_open()
- *	- initialize the serial port
- *	Return non-zero if we didn't find a serial port.
- */
-static int __init gdb_console_setup(struct console *co, char *options)
-{
-	return 0;
-}
-
-static const struct console gdb_console = {
-	.name		= "gdb_con",
-	.write		= gdb_console_output,
-	.device		= NULL,
-	.setup		= gdb_console_setup,
-	.flags		= CON_PRINTBUFFER,
-	.index		= -1,
-};
-#endif
-
-void __init setup_arch(char **cmdline_p)
-{
-	int bootmap_size;
-
-	memory_start = (unsigned long) &_ramstart;
-
-	/* allow for ROMFS on the end of the kernel */
-	if (memcmp((void *)memory_start, "-rom1fs-", 8) == 0) {
-#if defined(CONFIG_BLK_DEV_INITRD)
-		initrd_start = memory_start;
-		initrd_end = memory_start += be32_to_cpu(((unsigned long *) (memory_start))[2]);
-#else
-		memory_start += be32_to_cpu(((unsigned long *) memory_start)[2]);
-#endif
-	}
-	memory_start = PAGE_ALIGN(memory_start);
-#if !defined(CONFIG_BLKDEV_RESERVE)
-	memory_end = (unsigned long) &_ramend; /* by now the stack is part of the init task */
-#if defined(CONFIG_GDB_DEBUG)
-	memory_end -= STUBSIZE;
-#endif
-#else
-	if ((memory_end < CONFIG_BLKDEV_RESERVE_ADDRESS) && 
-	    (memory_end > CONFIG_BLKDEV_RESERVE_ADDRESS))
-	    /* overlap userarea */
-	    memory_end = CONFIG_BLKDEV_RESERVE_ADDRESS; 
-#endif
-
-	init_mm.start_code = (unsigned long) _stext;
-	init_mm.end_code = (unsigned long) _etext;
-	init_mm.end_data = (unsigned long) _edata;
-	init_mm.brk = (unsigned long) 0; 
-
-#if (defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)) && defined(CONFIG_GDB_MAGICPRINT)
-	register_console((struct console *)&gdb_console);
-#endif
-
-	printk(KERN_INFO "\r\n\nuClinux " CPU "\n");
-	printk(KERN_INFO "Target Hardware: %s\n",_target_name);
-	printk(KERN_INFO "Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne\n");
-	printk(KERN_INFO "H8/300 series support by Yoshinori Sato <ysato@users.sourceforge.jp>\n");
-
-#ifdef DEBUG
-	printk(KERN_DEBUG "KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p "
-		"BSS=0x%p-0x%p\n", _stext, _etext, _sdata, _edata, __bss_start,
-		__bss_stop);
-	printk(KERN_DEBUG "KERNEL -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx "
-		"STACK=0x%06lx-0x%p\n", __bss_stop, memory_start, memory_start,
-		memory_end, memory_end, &_ramend);
-#endif
-
-#ifdef CONFIG_DEFAULT_CMDLINE
-	/* set from default command line */
-	if (*command_line == '\0')
-		strcpy(command_line,CONFIG_KERNEL_COMMAND);
-#endif
-	/* Keep a copy of command line */
-	*cmdline_p = &command_line[0];
-	memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
-	boot_command_line[COMMAND_LINE_SIZE-1] = 0;
-
-#ifdef DEBUG
-	if (strlen(*cmdline_p)) 
-		printk(KERN_DEBUG "Command line: '%s'\n", *cmdline_p);
-#endif
-
-	/*
-	 * give all the memory to the bootmap allocator,  tell it to put the
-	 * boot mem_map at the start of memory
-	 */
-	bootmap_size = init_bootmem_node(
-			NODE_DATA(0),
-			memory_start >> PAGE_SHIFT, /* map goes here */
-			PAGE_OFFSET >> PAGE_SHIFT,	/* 0 on coldfire */
-			memory_end >> PAGE_SHIFT);
-	/*
-	 * free the usable memory,  we have to make sure we do not free
-	 * the bootmem bitmap so we then reserve it after freeing it :-)
-	 */
-	free_bootmem(memory_start, memory_end - memory_start);
-	reserve_bootmem(memory_start, bootmap_size, BOOTMEM_DEFAULT);
-	/*
-	 * get kmalloc into gear
-	 */
-	paging_init();
-	h8300_gpio_init();
-#if defined(CONFIG_H8300_AKI3068NET) && defined(CONFIG_IDE)
-	{
-#define AREABIT(addr) (1 << (((addr) >> 21) & 7))
-		/* setup BSC */
-		volatile unsigned char *abwcr = (volatile unsigned char *)ABWCR;
-		volatile unsigned char *cscr = (volatile unsigned char *)CSCR;
-		*abwcr &= ~(AREABIT(CONFIG_H8300_IDE_BASE) | AREABIT(CONFIG_H8300_IDE_ALT));
-		*cscr  |= (AREABIT(CONFIG_H8300_IDE_BASE) | AREABIT(CONFIG_H8300_IDE_ALT)) | 0x0f;
-	}
-#endif
-#ifdef DEBUG
-	printk(KERN_DEBUG "Done setup_arch\n");
-#endif
-}
-
-/*
- *	Get CPU information for use by the procfs.
- */
-
-static int show_cpuinfo(struct seq_file *m, void *v)
-{
-    char *cpu;
-    int mode;
-    u_long clockfreq;
-
-    cpu = CPU;
-    mode = *(volatile unsigned char *)MDCR & 0x07;
-
-    clockfreq = CONFIG_CPU_CLOCK;
-
-    seq_printf(m,  "CPU:\t\t%s (mode:%d)\n"
-		   "Clock:\t\t%lu.%1luMHz\n"
-		   "BogoMips:\t%lu.%02lu\n"
-		   "Calibration:\t%lu loops\n",
-	           cpu,mode,
-		   clockfreq/1000,clockfreq%1000,
-		   (loops_per_jiffy*HZ)/500000,((loops_per_jiffy*HZ)/5000)%100,
-		   (loops_per_jiffy*HZ));
-
-    return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
-	return *pos < NR_CPUS ? ((void *) 0x12345678) : NULL;
-}
-
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
-	++*pos;
-	return c_start(m, pos);
-}
-
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-
-const struct seq_operations cpuinfo_op = {
-	.start	= c_start,
-	.next	= c_next,
-	.stop	= c_stop,
-	.show	= show_cpuinfo,
-};